ARM: MediaTek: Add support for MediaTek MT8512 SoC

Add support for MediaTek MT8512 SoC. This include the file
that will initialize the SoC after boot and its device tree.

Signed-off-by: mingming lee <mingming.lee@mediatek.com>
This commit is contained in:
mingming lee 2019-12-31 11:29:19 +08:00 committed by Tom Rini
parent 0c0859cf2d
commit 953bb4c3ce
6 changed files with 245 additions and 0 deletions

115
arch/arm/dts/mt8512.dtsi Normal file
View file

@ -0,0 +1,115 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (C) 2019 MediaTek Inc.
* Author: Mingming Lee <mingming.lee@mediatek.com>
*
*/
#include <dt-bindings/clock/mt8512-clk.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
compatible = "mediatek,mt8512";
interrupt-parent = <&sysirq>;
#address-cells = <1>;
#size-cells = <1>;
gic: interrupt-controller@c000000 {
compatible = "arm,gic-v3";
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
interrupt-controller;
reg = <0xc000000 0x40000>, /* GICD */
<0xc080000 0x200000>; /* GICR */
interrupts = <GIC_PPI 9
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
topckgen: clock-controller@10000000 {
compatible = "mediatek,mt8512-topckgen";
reg = <0x10000000 0x1000>;
#clock-cells = <1>;
};
topckgen_cg: clock-controller-cg@10000000 {
compatible = "mediatek,mt8512-topckgen-cg";
reg = <0x10000000 0x1000>;
#clock-cells = <1>;
};
infracfg: clock-controller@10001000 {
compatible = "mediatek,mt8512-infracfg";
reg = <0x10001000 0x1000>;
#clock-cells = <1>;
};
pinctrl: pinctrl@10005000 {
compatible = "mediatek,mt8512-pinctrl";
reg = <0x10005000 0x1000>;
gpio: gpio-controller {
gpio-controller;
#gpio-cells = <2>;
};
};
watchdog0: watchdog@10007000 {
compatible = "mediatek,wdt";
reg = <0x10007000 0x1000>;
interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_FALLING>;
#reset-cells = <1>;
status = "disabled";
timeout-sec = <60>;
reset-on-timeout;
};
timer0: apxgpt@10008000 {
compatible = "mediatek,timer";
reg = <0x10008000 0x1000>;
interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_LOW>;
clocks = <&topckgen CLK_TOP_SYS_26M_D2>,
<&topckgen CLK_TOP_CLK32K>,
<&infracfg CLK_INFRA_APXGPT>;
clock-names = "clk13m",
"clk32k",
"bus";
};
apmixedsys: clock-controller@1000c000 {
compatible = "mediatek,mt8512-apmixedsys";
reg = <0x1000c000 0x1000>;
#clock-cells = <1>;
};
sysirq: interrupt-controller@10200a80 {
compatible = "mediatek,sysirq";
interrupt-controller;
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
reg = <0x10200a80 0x50>;
};
uart0: serial@11002000 {
compatible = "mediatek,hsuart";
reg = <0x11002000 0x1000>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_LOW>;
clocks = <&topckgen CLK_TOP_CLK26M>,
<&infracfg CLK_INFRA_UART0>;
clock-names = "baud", "bus";
status = "disabled";
};
mmc0: mmc@11230000 {
compatible = "mediatek,mt8512-mmc";
reg = <0x11230000 0x1000>,
<0x11cd0000 0x1000>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>;
clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>,
<&infracfg CLK_INFRA_MSDC0>,
<&infracfg CLK_INFRA_MSDC0_SRC>;
clock-names = "source", "hclk", "source_cg";
status = "disabled";
};
};

View file

@ -6,6 +6,10 @@ config SYS_SOC
config SYS_VENDOR config SYS_VENDOR
default "mediatek" default "mediatek"
config MT8512
bool "MediaTek MT8512 SoC"
default n
choice choice
prompt "MediaTek board select" prompt "MediaTek board select"
@ -29,6 +33,16 @@ config TARGET_MT7629
including DDR3, crypto engine, 3x3 11n/ac Wi-Fi, Gigabit Ethernet, including DDR3, crypto engine, 3x3 11n/ac Wi-Fi, Gigabit Ethernet,
switch, USB3.0, PCIe, UART, SPI, I2C and PWM. switch, USB3.0, PCIe, UART, SPI, I2C and PWM.
config TARGET_MT8512
bool "MediaTek MT8512 M1 Board"
select ARM64
select MT8512
help
The MediaTek MT8512 is a ARM64-based SoC with a quad-core Cortex-A53.
including UART, SPI, USB2.0 and OTG, SD and MMC cards, NAND, PWM,
Ethernet, IR TX/RX, I2C, I2S, S/PDIF, and built-in Wi-Fi / Bluetooth combo
chip and several DDR3 and DDR4 options.
config TARGET_MT8516 config TARGET_MT8516
bool "MediaTek MT8516 SoC" bool "MediaTek MT8516 SoC"
select ARM64 select ARM64
@ -51,6 +65,7 @@ endchoice
source "board/mediatek/mt7623/Kconfig" source "board/mediatek/mt7623/Kconfig"
source "board/mediatek/mt7629/Kconfig" source "board/mediatek/mt7629/Kconfig"
source "board/mediatek/mt8512/Kconfig"
source "board/mediatek/mt8518/Kconfig" source "board/mediatek/mt8518/Kconfig"
source "board/mediatek/pumpkin/Kconfig" source "board/mediatek/pumpkin/Kconfig"

View file

@ -3,6 +3,7 @@
obj-y += cpu.o obj-y += cpu.o
obj-$(CONFIG_SPL_BUILD) += spl.o obj-$(CONFIG_SPL_BUILD) += spl.o
obj-$(CONFIG_MT8512) += mt8512/
obj-$(CONFIG_TARGET_MT7623) += mt7623/ obj-$(CONFIG_TARGET_MT7623) += mt7623/
obj-$(CONFIG_TARGET_MT7629) += mt7629/ obj-$(CONFIG_TARGET_MT7629) += mt7629/
obj-$(CONFIG_TARGET_MT8516) += mt8516/ obj-$(CONFIG_TARGET_MT8516) += mt8516/

View file

@ -0,0 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
obj-y += init.o
obj-y += lowlevel_init.o

View file

@ -0,0 +1,78 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Configuration for MediaTek MT8512 SoC
*
* Copyright (C) 2019 MediaTek Inc.
* Author: Mingming Lee <mingming.lee@mediatek.com>
*/
#include <clk.h>
#include <common.h>
#include <dm.h>
#include <fdtdec.h>
#include <ram.h>
#include <wdt.h>
#include <asm/arch/misc.h>
#include <asm/armv8/mmu.h>
#include <asm/sections.h>
#include <dm/uclass.h>
#include <dt-bindings/clock/mt8512-clk.h>
DECLARE_GLOBAL_DATA_PTR;
int dram_init(void)
{
return fdtdec_setup_mem_size_base();
}
phys_size_t get_effective_memsize(void)
{
/* limit stack below tee reserve memory */
return gd->ram_size - 6 * SZ_1M;
}
int dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = gd->ram_base;
gd->bd->bi_dram[0].size = get_effective_memsize();
return 0;
}
void reset_cpu(ulong addr)
{
struct udevice *watchdog_dev = NULL;
if (uclass_get_device_by_seq(UCLASS_WDT, 0, &watchdog_dev))
if (uclass_get_device(UCLASS_WDT, 0, &watchdog_dev))
psci_system_reset();
wdt_expire_now(watchdog_dev, 0);
}
int print_cpuinfo(void)
{
debug("CPU: MediaTek MT8512\n");
return 0;
}
static struct mm_region mt8512_mem_map[] = {
{
/* DDR */
.virt = 0x40000000UL,
.phys = 0x40000000UL,
.size = 0x40000000UL,
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_OUTER_SHARE,
}, {
.virt = 0x00000000UL,
.phys = 0x00000000UL,
.size = 0x40000000UL,
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
PTE_BLOCK_NON_SHARE |
PTE_BLOCK_PXN | PTE_BLOCK_UXN
}, {
0,
}
};
struct mm_region *mem_map = mt8512_mem_map;

View file

@ -0,0 +1,32 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2019 MediaTek Inc.
* Author: Mingming Lee <mingming.lee@mediatek.com>
*/
/*
* Switch from AArch64 EL2 to AArch32 EL2
* @param inputs:
* x0: argument, zero
* x1: machine nr
* x2: fdt address
* x3: input argument
* x4: kernel entry point
* @param outputs for secure firmware:
* x0: function id
* x1: kernel entry point
* x2: machine nr
* x3: fdt address
*/
.global armv8_el2_to_aarch32
armv8_el2_to_aarch32:
mov x3, x2
mov x2, x1
mov x1, x4
mov x4, #0
/* Define in src\bsp\trustzone\atf\v1.2\ */
/* mt8xxx\plat\mediatek\common\sip_svc.h */
/* MTK_SIP_KERNEL_BOOT_AARCH64 for U-BOOT-64 to KERNEL*/
ldr x0, =0xC2000200
SMC #0
ret