ARM: UniPhier: remove Denali NAND controller fixup code

This ugly work-around code is unnecessary since commit f09eb52b3f
(mtd: denali: set some registers after nand_scan_ident()).

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
This commit is contained in:
Masahiro Yamada 2014-11-28 15:19:32 +09:00
parent 97cdf64026
commit 9248a78f40

View file

@ -26,42 +26,6 @@ static void nand_denali_wp_disable(void)
#endif
}
static void nand_denali_fixup(void)
{
#if defined(CONFIG_NAND_DENALI) && \
(defined(CONFIG_MACH_PH1_SLD8) || defined(CONFIG_MACH_PH1_PRO4))
/*
* The Denali NAND controller on some of UniPhier SoCs does not
* automatically query the device parameters. For those SoCs,
* some registers must be set after the device is probed.
*/
void __iomem *denali_reg = (void __iomem *)CONFIG_SYS_NAND_REGS_BASE;
struct mtd_info *mtd;
struct nand_chip *chip;
if (nand_curr_device < 0 ||
nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE) {
/* NAND was not detected. Just return. */
return;
}
mtd = &nand_info[nand_curr_device];
chip = mtd->priv;
writel(mtd->erasesize / mtd->writesize, denali_reg + PAGES_PER_BLOCK);
writel(0, denali_reg + DEVICE_WIDTH);
writel(mtd->writesize, denali_reg + DEVICE_MAIN_AREA_SIZE);
writel(mtd->oobsize, denali_reg + DEVICE_SPARE_AREA_SIZE);
writel(1, denali_reg + DEVICES_CONNECTED);
/*
* chip->scan_bbt in nand_scan_tail() has been skipped.
* It should be done in here.
*/
chip->scan_bbt(mtd);
#endif
}
int board_late_init(void)
{
puts("MODE: ");
@ -70,7 +34,6 @@ int board_late_init(void)
case BOOT_DEVICE_MMC1:
printf("eMMC Boot\n");
setenv("bootmode", "emmcboot");
nand_denali_fixup();
break;
case BOOT_DEVICE_NAND:
printf("NAND Boot\n");
@ -80,7 +43,6 @@ int board_late_init(void)
case BOOT_DEVICE_NOR:
printf("NOR Boot\n");
setenv("bootmode", "norboot");
nand_denali_fixup();
break;
default:
printf("Unsupported Boot Mode\n");