Merge branch 'master' of git://git.denx.de/u-boot-sh

This commit is contained in:
Wolfgang Denk 2011-03-21 21:38:29 +01:00
commit 9063fda9d6
6 changed files with 96 additions and 8 deletions

View file

@ -38,7 +38,7 @@ SECTIONS
.text :
{
arch/sh/cpu/sh2/start.o (.text)
KEEP(arch/sh/cpu/sh2/start.o (.text))
. = ALIGN(8192);
common/env_embedded.o (.ppcenv)
. = ALIGN(8192);

View file

@ -44,7 +44,7 @@ SECTIONS
.text :
{
arch/sh/cpu/sh3/start.o (.text)
KEEP(arch/sh/cpu/sh3/start.o (.text))
. = ALIGN(8192);
common/env_embedded.o (.ppcenv)
. = ALIGN(8192);

View file

@ -41,7 +41,7 @@ SECTIONS
.text :
{
arch/sh/cpu/sh4/start.o (.text)
KEEP(arch/sh/cpu/sh4/start.o (.text))
. = ALIGN(8192);
common/env_embedded.o (.ppcenv)
. = ALIGN(8192);

View file

@ -43,6 +43,7 @@ const char version_string[] = U_BOOT_VERSION" ("U_BOOT_DATE" - "U_BOOT_TIME")";
unsigned long monitor_flash_len = CONFIG_SYS_MONITOR_LEN;
#ifndef CONFIG_SYS_NO_FLASH
static int sh_flash_init(void)
{
gd->bd->bi_flashsize = flash_init();
@ -54,6 +55,7 @@ static int sh_flash_init(void)
return 0;
}
#endif /* CONFIG_SYS_NO_FLASH */
#if defined(CONFIG_CMD_NAND)
# include <nand.h>
@ -125,7 +127,9 @@ init_fnc_t *init_sequence[] =
dram_init, /* SDRAM init */
timer_init, /* SuperH Timer (TCNT0 only) init */
sh_mem_env_init,
sh_flash_init, /* Flash memory(NOR) init*/
#ifndef CONFIG_SYS_NO_FLASH
sh_flash_init, /* Flash memory init*/
#endif
INIT_FUNC_NAND_INIT/* Flash memory (NAND) init */
INIT_FUNC_PCI_INIT /* PCI init */
stdio_init,
@ -157,7 +161,9 @@ void sh_generic_init(void)
bd = gd->bd;
bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
#ifndef CONFIG_SYS_NO_FLASH
bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
#endif
#if defined(CONFIG_SYS_SRAM_BASE) && defined(CONFIG_SYS_SRAM_SIZE)
bd->bi_sramstart = CONFIG_SYS_SRAM_BASE;
bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE;

View file

@ -277,6 +277,7 @@ int sh_eth_recv(struct eth_device *dev)
static int sh_eth_reset(struct sh_eth_dev *eth)
{
int port = eth->port;
#if defined(CONFIG_CPU_SH7763)
int ret = 0, i;
/* Start e-dmac transmitter and receiver */
@ -296,6 +297,13 @@ static int sh_eth_reset(struct sh_eth_dev *eth)
}
return ret;
#else
outl(inl(EDMR(port)) | EDMR_SRST, EDMR(port));
udelay(3000);
outl(inl(EDMR(port)) & ~EDMR_SRST, EDMR(port));
return 0;
#endif
}
static int sh_eth_tx_desc_init(struct sh_eth_dev *eth)
@ -339,9 +347,11 @@ static int sh_eth_tx_desc_init(struct sh_eth_dev *eth)
/* Point the controller to the tx descriptor list. Must use physical
addresses */
outl(ADDR_TO_PHY(port_info->tx_desc_base), TDLAR(port));
#if defined(CONFIG_CPU_SH7763)
outl(ADDR_TO_PHY(port_info->tx_desc_base), TDFAR(port));
outl(ADDR_TO_PHY(cur_tx_desc), TDFXR(port));
outl(0x01, TDFFR(port));/* Last discriptor bit */
#endif
err:
return ret;
@ -405,9 +415,11 @@ static int sh_eth_rx_desc_init(struct sh_eth_dev *eth)
/* Point the controller to the rx descriptor list */
outl(ADDR_TO_PHY(port_info->rx_desc_base), RDLAR(port));
#if defined(CONFIG_CPU_SH7763)
outl(ADDR_TO_PHY(port_info->rx_desc_base), RDFAR(port));
outl(ADDR_TO_PHY(cur_rx_desc), RDFXR(port));
outl(RDFFR_RDLF, RDFFR(port));
#endif
return ret;
@ -532,11 +544,18 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd)
outl(0, TFTR(port));
outl((FIFO_SIZE_T | FIFO_SIZE_R), FDR(port));
outl(RMCR_RST, RMCR(port));
#ifndef CONFIG_CPU_SH7757
outl(0, RPADIR(port));
#endif
outl((FIFO_F_D_RFF | FIFO_F_D_RFD), FCFTR(port));
/* Configure e-mac registers */
#if defined(CONFIG_CPU_SH7757)
outl(ECSIPR_BRCRXIP | ECSIPR_PSRTOIP | ECSIPR_LCHNGIP |
ECSIPR_MPDIP | ECSIPR_ICDIP, ECSIPR(port));
#else
outl(0, ECSIPR(port));
#endif
/* Set Mac address */
val = dev->enetaddr[0] << 24 | dev->enetaddr[1] << 16 |
@ -547,11 +566,16 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd)
outl(val, MALR(port));
outl(RFLR_RFL_MIN, RFLR(port));
#ifndef CONFIG_CPU_SH7757
outl(0, PIPR(port));
#endif
outl(APR_AP, APR(port));
outl(MPR_MP, MPR(port));
#ifdef CONFIG_CPU_SH7757
outl(TPAUSER_UNLIMITED, TPAUSER(port));
#else
outl(TPAUSER_TPAUSE, TPAUSER(port));
#endif
/* Configure phy */
ret = sh_eth_phy_config(eth);
if (ret) {
@ -562,6 +586,7 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd)
phy_status = sh_eth_mii_read_phy_reg(port, port_info->phy_addr, 1);
/* Set the transfer speed */
#ifdef CONFIG_CPU_SH7763
if (phy_status & (PHY_S_100X_F|PHY_S_100X_H)) {
printf(SHETHER_NAME ": 100Base/");
outl(GECMR_100B, GECMR(port));
@ -569,6 +594,16 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd)
printf(SHETHER_NAME ": 10Base/");
outl(GECMR_10B, GECMR(port));
}
#endif
#if defined(CONFIG_CPU_SH7757)
if (phy_status & (PHY_S_100X_F|PHY_S_100X_H)) {
printf("100Base/");
outl(1, RTRATE(port));
} else {
printf("10Base/");
outl(0, RTRATE(port));
}
#endif
/* Check if full duplex mode is supported by the phy */
if (phy_status & (PHY_S_100X_F|PHY_S_10T_F)) {

View file

@ -1,5 +1,5 @@
/*
* sh_eth.h - Driver for Renesas SH7763's gigabit ethernet controler.
* sh_eth.h - Driver for Renesas SuperH ethernet controler.
*
* Copyright (C) 2008 Renesas Solutions Corp.
* Copyright (c) 2008 Nobuhiro Iwamatsu
@ -30,7 +30,11 @@
#define ADDR_TO_P2(addr) ((((int)(addr) & ~0xe0000000) | 0xa0000000))
/* The ethernet controller needs to use physical addresses */
#if defined(CONFIG_SH_32BIT)
#define ADDR_TO_PHY(addr) ((((int)(addr) & ~0xe0000000) | 0x40000000))
#else
#define ADDR_TO_PHY(addr) ((int)(addr) & ~0xe0000000)
#endif
/* Number of supported ports */
#define MAX_PORT_NUM 2
@ -93,6 +97,7 @@ struct sh_eth_dev {
};
/* Register Address */
#ifdef CONFIG_CPU_SH7763
#define BASE_IO_ADDR 0xfee00000
#define EDSR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0000)
@ -130,6 +135,34 @@ struct sh_eth_dev {
#define MALR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x05c8)
#define MAHR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x05c0)
#elif defined(CONFIG_CPU_SH7757)
#define BASE_IO_ADDR 0xfef00000
#define TDLAR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0018)
#define RDLAR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0020)
#define EDMR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0000)
#define EDTRR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0008)
#define EDRRR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0010)
#define EESR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0028)
#define EESIPR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0030)
#define TRSCER(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0038)
#define TFTR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0048)
#define FDR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0050)
#define RMCR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0058)
#define FCFTR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0070)
#define ECMR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0100)
#define RFLR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0108)
#define ECSIPR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0118)
#define PIR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0120)
#define APR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0154)
#define MPR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0158)
#define TPAUSER(port) (BASE_IO_ADDR + 0x800 * (port) + 0x0164)
#define MAHR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x01c0)
#define MALR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x01c8)
#define RTRATE(port) (BASE_IO_ADDR + 0x800 * (port) + 0x01fc)
#endif
/*
* Register's bits
* Copy from Linux driver source code
@ -149,6 +182,10 @@ enum DMAC_M_BIT {
EDMR_SRST = 0x03,
EMDR_DESC_R = 0x30, /* Descriptor reserve size */
EDMR_EL = 0x40, /* Litte endian */
#elif defined CONFIG_CPU_SH7757
EDMR_SRST = 0x01,
EMDR_DESC_R = 0x30, /* Descriptor reserve size */
EDMR_EL = 0x40, /* Litte endian */
#else /* CONFIG_CPU_SH7763 */
EDMR_SRST = 0x01,
#endif
@ -287,7 +324,7 @@ enum FCFTR_BIT {
/* Transfer descriptor bit */
enum TD_STS_BIT {
#ifdef CONFIG_CPU_SH7763
#if defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7757)
TD_TACT = 0x80000000,
#else
TD_TACT = 0x7fffffff,
@ -317,8 +354,10 @@ enum FELIC_MODE_BIT {
#ifdef CONFIG_CPU_SH7763
#define ECMR_CHG_DM (ECMR_TRCCM | ECMR_RZPF | ECMR_ZPF | ECMR_PFR | ECMR_RXF | \
ECMR_TXF | ECMR_MCT)
#elif CONFIG_CPU_SH7757
#define ECMR_CHG_DM (ECMR_ZPF)
#else
#define ECMR_CHG_DM (ECMR_ZPF | ECMR_PFR ECMR_RXF | ECMR_TXF | ECMR_MCT)
#define ECMR_CHG_DM (ECMR_ZPF | ECMR_PFR | ECMR_RXF | ECMR_TXF | ECMR_MCT)
#endif
/* ECSR */
@ -355,12 +394,20 @@ enum ECSIPR_STATUS_MASK_BIT {
/* APR */
enum APR_BIT {
#ifdef CONFIG_CPU_SH7757
APR_AP = 0x00000001,
#else
APR_AP = 0x00000004,
#endif
};
/* MPR */
enum MPR_BIT {
#ifdef CONFIG_CPU_SH7757
MPR_MP = 0x00000001,
#else
MPR_MP = 0x00000006,
#endif
};
/* TRSCER */