spi: sun4i: Driver cleanup

- drop unused macros.
- use base instead of base_addr, for better code readability
- move .probe and .ofdata_to_platdata functions in required
  places to add platdata support in future.
- use sentinel sun4i_spi_ids.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
This commit is contained in:
Jagan Teki 2019-02-27 20:02:12 +05:30
parent 853f4511e9
commit 903e7cf37c

View file

@ -33,57 +33,16 @@
#include <linux/iopoll.h>
#define SUN4I_RXDATA_REG 0x00
DECLARE_GLOBAL_DATA_PTR;
#define SUN4I_TXDATA_REG 0x04
#define SUN4I_CTL_REG 0x08
#define SUN4I_CTL_ENABLE BIT(0)
#define SUN4I_CTL_MASTER BIT(1)
#define SUN4I_CTL_CPHA BIT(2)
#define SUN4I_CTL_CPOL BIT(3)
#define SUN4I_CTL_CS_ACTIVE_LOW BIT(4)
#define SUN4I_CTL_LMTF BIT(6)
#define SUN4I_CTL_TF_RST BIT(8)
#define SUN4I_CTL_RF_RST BIT(9)
#define SUN4I_CTL_XCH BIT(10)
#define SUN4I_CTL_CS_MASK 0x3000
#define SUN4I_CTL_CS(cs) (((cs) << 12) & SUN4I_CTL_CS_MASK)
#define SUN4I_CTL_DHB BIT(15)
#define SUN4I_CTL_CS_MANUAL BIT(16)
#define SUN4I_CTL_CS_LEVEL BIT(17)
#define SUN4I_CTL_TP BIT(18)
#define SUN4I_INT_CTL_REG 0x0c
#define SUN4I_INT_CTL_RF_F34 BIT(4)
#define SUN4I_INT_CTL_TF_E34 BIT(12)
#define SUN4I_INT_CTL_TC BIT(16)
#define SUN4I_INT_STA_REG 0x10
#define SUN4I_DMA_CTL_REG 0x14
#define SUN4I_WAIT_REG 0x18
#define SUN4I_CLK_CTL_REG 0x1c
#define SUN4I_CLK_CTL_CDR2_MASK 0xff
#define SUN4I_CLK_CTL_CDR2(div) ((div) & SUN4I_CLK_CTL_CDR2_MASK)
#define SUN4I_CLK_CTL_CDR1_MASK 0xf
#define SUN4I_CLK_CTL_CDR1(div) (((div) & SUN4I_CLK_CTL_CDR1_MASK) << 8)
#define SUN4I_CLK_CTL_DRS BIT(12)
#define SUN4I_MAX_XFER_SIZE 0xffffff
#define SUN4I_BURST_CNT_REG 0x20
#define SUN4I_BURST_CNT(cnt) ((cnt) & SUN4I_MAX_XFER_SIZE)
#define SUN4I_XMIT_CNT_REG 0x24
#define SUN4I_XMIT_CNT(cnt) ((cnt) & SUN4I_MAX_XFER_SIZE)
#define SUN4I_FIFO_STA_REG 0x28
#define SUN4I_FIFO_STA_RF_CNT_BITS 0
#define SUN4I_FIFO_STA_TF_CNT_MASK 0x7f
#define SUN4I_FIFO_STA_TF_CNT_BITS 16
/* sun4i spi registers */
#define SUN4I_RXDATA_REG 0x00
#define SUN4I_TXDATA_REG 0x04
#define SUN4I_CTL_REG 0x08
#define SUN4I_CLK_CTL_REG 0x1c
#define SUN4I_BURST_CNT_REG 0x20
#define SUN4I_XMIT_CNT_REG 0x24
#define SUN4I_FIFO_STA_REG 0x28
/* sun6i spi registers */
#define SUN6I_GBL_CTL_REG 0x04
@ -97,12 +56,25 @@
#define SUN6I_TXDATA_REG 0x200
#define SUN6I_RXDATA_REG 0x300
#define SUN4I_SPI_MAX_RATE 24000000
#define SUN4I_SPI_MIN_RATE 3000
#define SUN4I_SPI_DEFAULT_RATE 1000000
#define SUN4I_SPI_TIMEOUT_US 1000000
/* sun spi bits */
#define SUN4I_CTL_ENABLE BIT(0)
#define SUN4I_CTL_MASTER BIT(1)
#define SUN4I_CLK_CTL_CDR2_MASK 0xff
#define SUN4I_CLK_CTL_CDR2(div) ((div) & SUN4I_CLK_CTL_CDR2_MASK)
#define SUN4I_CLK_CTL_CDR1_MASK 0xf
#define SUN4I_CLK_CTL_CDR1(div) (((div) & SUN4I_CLK_CTL_CDR1_MASK) << 8)
#define SUN4I_CLK_CTL_DRS BIT(12)
#define SUN4I_MAX_XFER_SIZE 0xffffff
#define SUN4I_BURST_CNT(cnt) ((cnt) & SUN4I_MAX_XFER_SIZE)
#define SUN4I_XMIT_CNT(cnt) ((cnt) & SUN4I_MAX_XFER_SIZE)
#define SUN4I_FIFO_STA_RF_CNT_BITS 0
#define SPI_REG(priv, reg) ((priv)->base_addr + \
#define SUN4I_SPI_MAX_RATE 24000000
#define SUN4I_SPI_MIN_RATE 3000
#define SUN4I_SPI_DEFAULT_RATE 1000000
#define SUN4I_SPI_TIMEOUT_US 1000000
#define SPI_REG(priv, reg) ((priv)->base + \
(priv)->variant->regs[reg])
#define SPI_BIT(priv, bit) ((priv)->variant->bits[bit])
#define SPI_CS(priv, cs) (((cs) << SPI_BIT(priv, SPI_TCR_CS_SEL)) & \
@ -149,7 +121,7 @@ struct sun4i_spi_variant {
struct sun4i_spi_platdata {
struct sun4i_spi_variant *variant;
u32 base_addr;
u32 base;
u32 max_hz;
};
@ -157,7 +129,7 @@ struct sun4i_spi_priv {
struct sun4i_spi_variant *variant;
struct clk clk_ahb, clk_mod;
struct reset_ctl reset;
u32 base_addr;
u32 base;
u32 freq;
u32 mode;
@ -165,8 +137,6 @@ struct sun4i_spi_priv {
u8 *rx_buf;
};
DECLARE_GLOBAL_DATA_PTR;
static inline void sun4i_spi_drain_fifo(struct sun4i_spi_priv *priv, int len)
{
u8 byte;
@ -328,56 +298,6 @@ err_ahb:
return ret;
}
static int sun4i_spi_ofdata_to_platdata(struct udevice *bus)
{
struct sun4i_spi_platdata *plat = dev_get_platdata(bus);
int node = dev_of_offset(bus);
plat->base_addr = devfdt_get_addr(bus);
plat->variant = (struct sun4i_spi_variant *)dev_get_driver_data(bus);
plat->max_hz = fdtdec_get_int(gd->fdt_blob, node,
"spi-max-frequency",
SUN4I_SPI_DEFAULT_RATE);
if (plat->max_hz > SUN4I_SPI_MAX_RATE)
plat->max_hz = SUN4I_SPI_MAX_RATE;
return 0;
}
static int sun4i_spi_probe(struct udevice *bus)
{
struct sun4i_spi_platdata *plat = dev_get_platdata(bus);
struct sun4i_spi_priv *priv = dev_get_priv(bus);
int ret;
ret = clk_get_by_name(bus, "ahb", &priv->clk_ahb);
if (ret) {
dev_err(dev, "failed to get ahb clock\n");
return ret;
}
ret = clk_get_by_name(bus, "mod", &priv->clk_mod);
if (ret) {
dev_err(dev, "failed to get mod clock\n");
return ret;
}
ret = reset_get_by_index(bus, 0, &priv->reset);
if (ret && ret != -ENOENT) {
dev_err(dev, "failed to get reset\n");
return ret;
}
sun4i_spi_parse_pins(bus);
priv->variant = plat->variant;
priv->base_addr = plat->base_addr;
priv->freq = plat->max_hz;
return 0;
}
static int sun4i_spi_claim_bus(struct udevice *dev)
{
struct sun4i_spi_priv *priv = dev_get_priv(dev->parent);
@ -558,6 +478,56 @@ static const struct dm_spi_ops sun4i_spi_ops = {
.set_mode = sun4i_spi_set_mode,
};
static int sun4i_spi_probe(struct udevice *bus)
{
struct sun4i_spi_platdata *plat = dev_get_platdata(bus);
struct sun4i_spi_priv *priv = dev_get_priv(bus);
int ret;
ret = clk_get_by_name(bus, "ahb", &priv->clk_ahb);
if (ret) {
dev_err(dev, "failed to get ahb clock\n");
return ret;
}
ret = clk_get_by_name(bus, "mod", &priv->clk_mod);
if (ret) {
dev_err(dev, "failed to get mod clock\n");
return ret;
}
ret = reset_get_by_index(bus, 0, &priv->reset);
if (ret && ret != -ENOENT) {
dev_err(dev, "failed to get reset\n");
return ret;
}
sun4i_spi_parse_pins(bus);
priv->variant = plat->variant;
priv->base = plat->base;
priv->freq = plat->max_hz;
return 0;
}
static int sun4i_spi_ofdata_to_platdata(struct udevice *bus)
{
struct sun4i_spi_platdata *plat = dev_get_platdata(bus);
int node = dev_of_offset(bus);
plat->base = devfdt_get_addr(bus);
plat->variant = (struct sun4i_spi_variant *)dev_get_driver_data(bus);
plat->max_hz = fdtdec_get_int(gd->fdt_blob, node,
"spi-max-frequency",
SUN4I_SPI_DEFAULT_RATE);
if (plat->max_hz > SUN4I_SPI_MAX_RATE)
plat->max_hz = SUN4I_SPI_MAX_RATE;
return 0;
}
static const unsigned long sun4i_spi_regs[] = {
[SPI_GCR] = SUN4I_CTL_REG,
[SPI_TCR] = SUN4I_CTL_REG,
@ -649,7 +619,7 @@ static const struct udevice_id sun4i_spi_ids[] = {
.compatible = "allwinner,sun8i-h3-spi",
.data = (ulong)&sun8i_h3_spi_variant,
},
{ }
{ /* sentinel */ }
};
U_BOOT_DRIVER(sun4i_spi) = {