Merge branch 'master' of git://www.denx.de/git/u-boot-imx

Migrate CONFIG_ARCH_USE_MEMSET/MEMCPY with this merge.

Signed-off-by: Tom Rini <trini@konsulko.com>

arch/arm/Kconfig

@@ -918,6 +918,8 @@ source "arch/arm/mach-keystone/Kconfig"
 
 source "arch/arm/mach-kirkwood/Kconfig"
 
+source "arch/arm/mach-litesom/Kconfig"
+
 source "arch/arm/mach-mvebu/Kconfig"
 
 source "arch/arm/cpu/armv7/ls102xa/Kconfig"

arch/arm/Makefile

@@ -58,6 +58,7 @@ machine-$(CONFIG_ARCH_HIGHBANK)		+= highbank
 machine-$(CONFIG_ARCH_KEYSTONE)		+= keystone
 # TODO: rename CONFIG_KIRKWOOD -> CONFIG_ARCH_KIRKWOOD
 machine-$(CONFIG_KIRKWOOD)		+= kirkwood
+machine-$(CONFIG_LITESOM)		+= litesom
 machine-$(CONFIG_ARCH_MESON)		+= meson
 machine-$(CONFIG_ARCH_MVEBU)		+= mvebu
 # TODO: rename CONFIG_TEGRA -> CONFIG_ARCH_TEGRA

arch/arm/cpu/armv7/mx5/Kconfig

@@ -18,11 +18,19 @@ config TARGET_USBARMORY
 	bool "Support USB armory"
 	select CPU_V7
 
+config TARGET_MX53CX9020
+	bool "Support CX9020"
+	select CPU_V7
+	select MX53
+	select DM
+	select DM_SERIAL
+
 endchoice
 
 config SYS_SOC
 	default "mx5"
 
+source "board/beckhoff/mx53cx9020/Kconfig"
 source "board/inversepath/usbarmory/Kconfig"
 
 endif

arch/arm/cpu/armv7/mx6/Kconfig

@@ -26,6 +26,10 @@ config MX6SX
 	select ROM_UNIFIED_SECTIONS
 	bool
 
+config MX6SLL
+	select ROM_UNIFIED_SECTIONS
+	bool
+
 config MX6UL
 	select SYS_L2CACHE_OFF
 	select ROM_UNIFIED_SECTIONS
@@ -51,6 +55,13 @@ config TARGET_ADVANTECH_DMS_BA16
 	bool "Advantech dms-ba16"
 	select MX6Q
 
+config TARGET_APALIS_IMX6
+	bool "Toradex Apalis iMX6 board"
+	select SUPPORT_SPL
+	select DM
+	select DM_SERIAL
+	select DM_THERMAL
+
 config TARGET_ARISTAINETOS
 	bool "aristainetos"
 
@@ -73,6 +84,13 @@ config TARGET_CM_FX6
 	select DM_SERIAL
 	select DM_GPIO
 
+config TARGET_COLIBRI_IMX6
+	bool "Toradex Colibri iMX6 board"
+	select SUPPORT_SPL
+	select DM
+	select DM_SERIAL
+	select DM_THERMAL
+
 config TARGET_EMBESTMX6BOARDS
 	bool "embestmx6boards"
 
@@ -108,7 +126,21 @@ config TARGET_MX6Q_ICORE
 	select MX6QDL
 	select OF_CONTROL
 	select DM
+	select DM_ETH
 	select DM_GPIO
+	select DM_I2C
+	select DM_MMC
+	select DM_THERMAL
+	select SUPPORT_SPL
+
+config TARGET_MX6Q_ICORE_RQS
+	bool "Support Engicam i.Core RQS"
+	select MX6QDL
+	select OF_CONTROL
+	select DM
+	select DM_ETH
+	select DM_GPIO
+	select DM_I2C
 	select DM_MMC
 	select DM_THERMAL
 	select SUPPORT_SPL
@@ -128,6 +160,12 @@ config TARGET_MX6SLEVK
 	bool "mx6slevk"
 	select SUPPORT_SPL
 
+config TARGET_MX6SLLEVK
+        bool "mx6sll evk"
+        select MX6SLL
+        select DM
+        select DM_THERMAL
+
 config TARGET_MX6SXSABRESD
 	bool "mx6sxsabresd"
 	select MX6SX
@@ -155,6 +193,18 @@ config TARGET_MX6UL_14X14_EVK
 	select DM_THERMAL
 	select SUPPORT_SPL
 
+config TARGET_MX6UL_GEAM
+	bool "Support Engicam GEAM6UL"
+	select MX6UL
+	select OF_CONTROL
+	select DM
+	select DM_ETH
+	select DM_GPIO
+	select DM_I2C
+	select DM_MMC
+	select DM_THERMAL
+	select SUPPORT_SPL
+
 config TARGET_MX6ULL_14X14_EVK
 	bool "Support mx6ull_14x14_evk"
 	select MX6ULL
@@ -172,6 +222,10 @@ config TARGET_PICO_IMX6UL
 	bool "PICO-IMX6UL-EMMC"
 	select MX6UL
 
+config TARGET_LITEBOARD
+	bool "Grinn liteBoard (i.MX6UL)"
+	select LITESOM
+
 config TARGET_PLATINUM_PICON
 	bool "platinum-picon"
 	select SUPPORT_SPL
@@ -203,6 +257,9 @@ config TARGET_UDOO
 config TARGET_UDOO_NEO
 	bool "UDOO Neo"
 	select SUPPORT_SPL
+	select MX6SX
+	select DM
+	select DM_THERMAL
 
 config TARGET_SAMTEC_VINING_2000
 	bool "samtec VIN|ING 2000"
@@ -253,15 +310,19 @@ source "board/compulab/cm_fx6/Kconfig"
 source "board/congatec/cgtqmx6eval/Kconfig"
 source "board/el/el6x/Kconfig"
 source "board/embest/mx6boards/Kconfig"
+source "board/engicam/geam6ul/Kconfig"
 source "board/engicam/icorem6/Kconfig"
+source "board/engicam/icorem6_rqs/Kconfig"
 source "board/freescale/mx6qarm2/Kconfig"
 source "board/freescale/mx6qsabreauto/Kconfig"
 source "board/freescale/mx6sabresd/Kconfig"
 source "board/freescale/mx6slevk/Kconfig"
+source "board/freescale/mx6sllevk/Kconfig"
 source "board/freescale/mx6sxsabresd/Kconfig"
 source "board/freescale/mx6sxsabreauto/Kconfig"
 source "board/freescale/mx6ul_14x14_evk/Kconfig"
 source "board/freescale/mx6ullevk/Kconfig"
+source "board/grinn/liteboard/Kconfig"
 source "board/phytec/pcm058/Kconfig"
 source "board/gateworks/gw_ventana/Kconfig"
 source "board/kosagi/novena/Kconfig"
@@ -271,6 +332,8 @@ source "board/solidrun/mx6cuboxi/Kconfig"
 source "board/technexion/pico-imx6ul/Kconfig"
 source "board/tbs/tbs2910/Kconfig"
 source "board/tqc/tqma6/Kconfig"
+source "board/toradex/apalis_imx6/Kconfig"
+source "board/toradex/colibri_imx6/Kconfig"
 source "board/udoo/Kconfig"
 source "board/udoo/neo/Kconfig"
 source "board/wandboard/Kconfig"

arch/arm/cpu/armv7/mx6/clock.c

@@ -171,6 +171,8 @@ int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
 			reg &= ~mask;
 		__raw_writel(reg, &imx_ccm->CCGR2);
 	} else {
+		if (is_mx6sll())
+			return -EINVAL;
 		if (is_mx6sx() || is_mx6ul() || is_mx6ull()) {
 			mask = MXC_CCM_CCGR6_I2C4_MASK;
 			addr = &imx_ccm->CCGR6;
@@ -382,7 +384,7 @@ static u32 get_ipg_per_clk(void)
 	u32 reg, perclk_podf;
 
 	reg = __raw_readl(&imx_ccm->cscmr1);
-	if (is_mx6sl() || is_mx6sx() ||
+	if (is_mx6sll() || is_mx6sl() || is_mx6sx() ||
 	    is_mx6dqp() || is_mx6ul() || is_mx6ull()) {
 		if (reg & MXC_CCM_CSCMR1_PER_CLK_SEL_MASK)
 			return MXC_HCLK; /* OSC 24Mhz */
@@ -400,7 +402,7 @@ static u32 get_uart_clk(void)
 	reg = __raw_readl(&imx_ccm->cscdr1);
 
 	if (is_mx6sl() || is_mx6sx() || is_mx6dqp() || is_mx6ul() ||
-	    is_mx6ull()) {
+	    is_mx6sll() || is_mx6ull()) {
 		if (reg & MXC_CCM_CSCDR1_UART_CLK_SEL)
 			freq = MXC_HCLK;
 	}
@@ -420,7 +422,7 @@ static u32 get_cspi_clk(void)
 		     MXC_CCM_CSCDR2_ECSPI_CLK_PODF_OFFSET;
 
 	if (is_mx6dqp() || is_mx6sl() || is_mx6sx() || is_mx6ul() ||
-	    is_mx6ull()) {
+	    is_mx6sll() || is_mx6ull()) {
 		if (reg & MXC_CCM_CSCDR2_ECSPI_CLK_SEL_MASK)
 			return MXC_HCLK / (cspi_podf + 1);
 	}
@@ -482,7 +484,8 @@ static u32 get_mmdc_ch0_clk(void)
 
 	u32 freq, podf, per2_clk2_podf, pmu_misc2_audio_div;
 
-	if (is_mx6sx() || is_mx6ul() || is_mx6ull() || is_mx6sl()) {
+	if (is_mx6sx() || is_mx6ul() || is_mx6ull() || is_mx6sl() ||
+	    is_mx6sll()) {
 		podf = (cbcdr & MXC_CCM_CBCDR_MMDC_CH1_PODF_MASK) >>
 			MXC_CCM_CBCDR_MMDC_CH1_PODF_OFFSET;
 		if (cbcdr & MXC_CCM_CBCDR_PERIPH2_CLK_SEL) {
@@ -514,6 +517,11 @@ static u32 get_mmdc_ch0_clk(void)
 				freq = mxc_get_pll_pfd(PLL_BUS, 0);
 				break;
 			case 3:
+				if (is_mx6sl()) {
+					freq = mxc_get_pll_pfd(PLL_BUS, 2) >> 1;
+					break;
+				}
+
 				pmu_misc2_audio_div = PMU_MISC2_AUDIO_DIV(__raw_readl(&imx_ccm->pmu_misc2));
 				switch (pmu_misc2_audio_div) {
 				case 0:
@@ -620,16 +628,19 @@ void mxs_set_lcdclk(u32 base_addr, u32 freq)
 
 	debug("mxs_set_lcdclk, freq = %dKHz\n", freq);
 
-	if (!is_mx6sx() && !is_mx6ul() && !is_mx6ull()) {
+	if (!is_mx6sx() && !is_mx6ul() && !is_mx6ull() && !is_mx6sl() &&
+	    !is_mx6sll()) {
 		debug("This chip not support lcd!\n");
 		return;
 	}
 
-	if (base_addr == LCDIF1_BASE_ADDR) {
+	if (!is_mx6sl()) {
-		reg = readl(&imx_ccm->cscdr2);
+		if (base_addr == LCDIF1_BASE_ADDR) {
-		/* Can't change clocks when clock not from pre-mux */
+			reg = readl(&imx_ccm->cscdr2);
-		if ((reg & MXC_CCM_CSCDR2_LCDIF1_CLK_SEL_MASK) != 0)
+			/* Can't change clocks when clock not from pre-mux */
-			return;
+			if ((reg & MXC_CCM_CSCDR2_LCDIF1_CLK_SEL_MASK) != 0)
+				return;
+		}
 	}
 
 	if (is_mx6sx()) {
@@ -700,24 +711,44 @@ void mxs_set_lcdclk(u32 base_addr, u32 freq)
 		if (enable_pll_video(pll_div, pll_num, pll_denom, post_div))
 			return;
 
-		/* Select pre-lcd clock to PLL5 and set pre divider */
+		enable_lcdif_clock(base_addr, 0);
-		clrsetbits_le32(&imx_ccm->cscdr2,
+		if (!is_mx6sl()) {
-				MXC_CCM_CSCDR2_LCDIF1_PRED_SEL_MASK |
+			/* Select pre-lcd clock to PLL5 and set pre divider */
-				MXC_CCM_CSCDR2_LCDIF1_PRE_DIV_MASK,
+			clrsetbits_le32(&imx_ccm->cscdr2,
-				(0x2 << MXC_CCM_CSCDR2_LCDIF1_PRED_SEL_OFFSET) |
+					MXC_CCM_CSCDR2_LCDIF1_PRED_SEL_MASK |
-				((pred - 1) <<
+					MXC_CCM_CSCDR2_LCDIF1_PRE_DIV_MASK,
-				 MXC_CCM_CSCDR2_LCDIF1_PRE_DIV_OFFSET));
+					(0x2 << MXC_CCM_CSCDR2_LCDIF1_PRED_SEL_OFFSET) |
+					((pred - 1) <<
+					 MXC_CCM_CSCDR2_LCDIF1_PRE_DIV_OFFSET));
 
-		/* Set the post divider */
+			/* Set the post divider */
-		clrsetbits_le32(&imx_ccm->cbcmr,
+			clrsetbits_le32(&imx_ccm->cbcmr,
-				MXC_CCM_CBCMR_LCDIF1_PODF_MASK,
+					MXC_CCM_CBCMR_LCDIF1_PODF_MASK,
-				((postd - 1) <<
+					((postd - 1) <<
-				 MXC_CCM_CBCMR_LCDIF1_PODF_OFFSET));
+					MXC_CCM_CBCMR_LCDIF1_PODF_OFFSET));
+		} else {
+			/* Select pre-lcd clock to PLL5 and set pre divider */
+			clrsetbits_le32(&imx_ccm->cscdr2,
+					MXC_CCM_CSCDR2_LCDIF_PIX_CLK_SEL_MASK |
+					MXC_CCM_CSCDR2_LCDIF_PIX_PRE_DIV_MASK,
+					(0x2 << MXC_CCM_CSCDR2_LCDIF_PIX_CLK_SEL_OFFSET) |
+					((pred - 1) <<
+					 MXC_CCM_CSCDR2_LCDIF_PIX_PRE_DIV_OFFSET));
+
+			/* Set the post divider */
+			clrsetbits_le32(&imx_ccm->cscmr1,
+					MXC_CCM_CSCMR1_LCDIF_PIX_PODF_MASK,
+					(((postd - 1)^0x6) <<
+					 MXC_CCM_CSCMR1_LCDIF_PIX_PODF_OFFSET));
+		}
+
+		enable_lcdif_clock(base_addr, 1);
 	} else if (is_mx6sx()) {
 		/* Setting LCDIF2 for i.MX6SX */
 		if (enable_pll_video(pll_div, pll_num, pll_denom, post_div))
 			return;
 
+		enable_lcdif_clock(base_addr, 0);
 		/* Select pre-lcd clock to PLL5 and set pre divider */
 		clrsetbits_le32(&imx_ccm->cscdr2,
 				MXC_CCM_CSCDR2_LCDIF2_PRED_SEL_MASK |
@@ -731,10 +762,12 @@ void mxs_set_lcdclk(u32 base_addr, u32 freq)
 				MXC_CCM_CSCMR1_LCDIF2_PODF_MASK,
 				((postd - 1) <<
 				 MXC_CCM_CSCMR1_LCDIF2_PODF_OFFSET));
+
+		enable_lcdif_clock(base_addr, 1);
 	}
 }
 
-int enable_lcdif_clock(u32 base_addr)
+int enable_lcdif_clock(u32 base_addr, bool enable)
 {
 	u32 reg = 0;
 	u32 lcdif_clk_sel_mask, lcdif_ccgr3_mask;
@@ -754,7 +787,7 @@ int enable_lcdif_clock(u32 base_addr)
 			 MXC_CCM_CCGR3_DISP_AXI_MASK) :
 			(MXC_CCM_CCGR3_LCDIF1_PIX_MASK |
 			 MXC_CCM_CCGR3_DISP_AXI_MASK);
-	} else if (is_mx6ul() || is_mx6ull()) {
+	} else if (is_mx6ul() || is_mx6ull() || is_mx6sll()) {
 		if (base_addr != LCDIF1_BASE_ADDR) {
 			puts("Wrong LCD interface!\n");
 			return -EINVAL;
@@ -762,23 +795,59 @@ int enable_lcdif_clock(u32 base_addr)
 		/* Set to pre-mux clock at default */
 		lcdif_clk_sel_mask = MXC_CCM_CSCDR2_LCDIF1_CLK_SEL_MASK;
 		lcdif_ccgr3_mask =  MXC_CCM_CCGR3_LCDIF1_PIX_MASK;
+	} else if (is_mx6sl()) {
+		if (base_addr != LCDIF1_BASE_ADDR) {
+			puts("Wrong LCD interface!\n");
+			return -EINVAL;
+		}
+
+		reg = readl(&imx_ccm->CCGR3);
+		reg &= ~(MXC_CCM_CCGR3_LCDIF_AXI_MASK |
+			 MXC_CCM_CCGR3_LCDIF_PIX_MASK);
+		writel(reg, &imx_ccm->CCGR3);
+
+		if (enable) {
+			reg = readl(&imx_ccm->cscdr3);
+			reg &= ~MXC_CCM_CSCDR3_LCDIF_AXI_CLK_SEL_MASK;
+			reg |= 1 << MXC_CCM_CSCDR3_LCDIF_AXI_CLK_SEL_OFFSET;
+			writel(reg, &imx_ccm->cscdr3);
+
+			reg = readl(&imx_ccm->CCGR3);
+			reg |= MXC_CCM_CCGR3_LCDIF_AXI_MASK |
+				MXC_CCM_CCGR3_LCDIF_PIX_MASK;
+			writel(reg, &imx_ccm->CCGR3);
+		}
+
+		return 0;
 	} else {
 		return 0;
 	}
 
-	reg = readl(&imx_ccm->cscdr2);
+	/* Gate LCDIF clock first */
-	reg &= ~lcdif_clk_sel_mask;
-	writel(reg, &imx_ccm->cscdr2);
-
-	/* Enable the LCDIF pix clock */
 	reg = readl(&imx_ccm->CCGR3);
-	reg |= lcdif_ccgr3_mask;
+	reg &= ~lcdif_ccgr3_mask;
 	writel(reg, &imx_ccm->CCGR3);
 
 	reg = readl(&imx_ccm->CCGR2);
-	reg |= MXC_CCM_CCGR2_LCD_MASK;
+	reg &= ~MXC_CCM_CCGR2_LCD_MASK;
 	writel(reg, &imx_ccm->CCGR2);
 
+	if (enable) {
+		/* Select pre-mux */
+		reg = readl(&imx_ccm->cscdr2);
+		reg &= ~lcdif_clk_sel_mask;
+		writel(reg, &imx_ccm->cscdr2);
+
+		/* Enable the LCDIF pix clock */
+		reg = readl(&imx_ccm->CCGR3);
+		reg |= lcdif_ccgr3_mask;
+		writel(reg, &imx_ccm->CCGR3);
+
+		reg = readl(&imx_ccm->CCGR2);
+		reg |= MXC_CCM_CCGR2_LCD_MASK;
+		writel(reg, &imx_ccm->CCGR2);
+	}
+
 	return 0;
 }
 #endif
@@ -916,6 +985,16 @@ static u32 get_usdhc_clk(u32 port)
 	u32 cscmr1 = __raw_readl(&imx_ccm->cscmr1);
 	u32 cscdr1 = __raw_readl(&imx_ccm->cscdr1);
 
+	if (is_mx6ul() || is_mx6ull()) {
+		if (port > 1)
+			return 0;
+	}
+
+	if (is_mx6sll()) {
+		if (port > 2)
+			return 0;
+	}
+
 	switch (port) {
 	case 0:
 		usdhc_podf = (cscdr1 & MXC_CCM_CSCDR1_USDHC1_PODF_MASK) >>
@@ -1079,7 +1158,7 @@ void hab_caam_clock_enable(unsigned char enable)
 {
 	u32 reg;
 
-	if (is_mx6ull()) {
+	if (is_mx6ull() || is_mx6sll()) {
 		/* CG5, DCP clock */
 		reg = __raw_readl(&imx_ccm->CCGR0);
 		if (enable)

arch/arm/dts/Makefile

@@ -293,9 +293,15 @@ dtb-$(CONFIG_VF610) += vf500-colibri.dtb \
 	pcm052.dtb \
 	bk4r1.dtb
 
+dtb-$(CONFIG_MX53) += imx53-cx9020.dtb
+
 dtb-$(CONFIG_MX6) += imx6ull-14x14-evk.dtb \
+	imx6sll-evk.dtb \
 	imx6dl-icore.dtb \
-	imx6q-icore.dtb
+	imx6dl-icore-rqs.dtb \
+	imx6q-icore.dtb \
+	imx6q-icore-rqs.dtb \
+	imx6ul-geam-kit.dtb
 
 dtb-$(CONFIG_MX7) += imx7-colibri.dtb
 

arch/arm/dts/imx53-cx9020.dts

@@ -0,0 +1,190 @@
+/*
+ * Copyright 2016 Beckhoff Automation
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * SPDX-License-Identifier:     GPL-2.0+ or X11
+ */
+
+/dts-v1/;
+#include "imx53.dtsi"
+
+#define MX53_PAD_EIM_D26__UART2_RXD_MUX    0x144 0x48c 0x880 0x2 0x0
+#define MX53_PAD_EIM_D27__UART2_TXD_MUX    0x148 0x490 0x000 0x2 0x0
+#define MX53_PAD_EIM_D28__UART2_RTS        0x14c 0x494 0x87c 0x2 0x0
+#define MX53_PAD_EIM_D29__UART2_CTS        0x150 0x498 0x000 0x2 0x0
+
+/ {
+	model = "Beckhoff CX9020-0100 i.MX53";
+	compatible = "fsl,imx53-qsb", "fsl,imx53";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-qsb {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000
+				MX53_PAD_GPIO_8__GPIO1_8          0x80000000
+				MX53_PAD_PATA_DATA14__GPIO2_14    0x80000000
+				MX53_PAD_PATA_DATA15__GPIO2_15    0x80000000
+				MX53_PAD_GPIO_1__GPIO1_1          0x80000000
+				MX53_PAD_GPIO_4__GPIO1_4          0x80000000
+				MX53_PAD_PATA_DA_0__GPIO7_6       0x80000000
+				MX53_PAD_PATA_DA_2__GPIO7_8	  0x80000000
+				MX53_PAD_GPIO_16__GPIO7_11        0x80000000
+
+				MX53_PAD_EIM_OE__EMI_WEIM_OE            0x80000000
+				MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT        0x80000000
+				MX53_PAD_EIM_LBA__EMI_WEIM_LBA          0x80000000
+				MX53_PAD_EIM_RW__EMI_WEIM_RW            0x80000000
+				MX53_PAD_EIM_EB0__EMI_WEIM_EB_0         0x80000000
+				MX53_PAD_EIM_EB1__EMI_WEIM_EB_1         0x80000000
+				MX53_PAD_EIM_EB2__EMI_WEIM_EB_2         0x80000000
+				MX53_PAD_EIM_EB3__EMI_WEIM_EB_3         0x80000000
+				MX53_PAD_EIM_CS0__EMI_WEIM_CS_0         0x80000000
+				MX53_PAD_EIM_CS1__EMI_WEIM_CS_1         0x80000000
+				MX53_PAD_EIM_A16__EMI_WEIM_A_16         0x80000000
+				MX53_PAD_EIM_A17__EMI_WEIM_A_17         0x80000000
+				MX53_PAD_EIM_A18__EMI_WEIM_A_18         0x80000000
+				MX53_PAD_EIM_A19__EMI_WEIM_A_19         0x80000000
+				MX53_PAD_EIM_A20__EMI_WEIM_A_20         0x80000000
+				MX53_PAD_EIM_A21__EMI_WEIM_A_21         0x80000000
+				MX53_PAD_EIM_A22__EMI_WEIM_A_22         0x80000000
+				MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0    0xa4
+				MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1    0xa4
+				MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2    0xa4
+				MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3    0xa4
+				MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4    0xa4
+				MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5    0xa4
+				MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6    0xa4
+				MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7    0xa4
+				MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8    0xa4
+				MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9    0xa4
+				MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10	0xa4
+				MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11  0xa4
+				MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12  0xa4
+				MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13  0xa4
+				MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14  0xa4
+				MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15  0xa4
+				MX53_PAD_PATA_DATA0__EMI_NANDF_D_0      0xa4
+				MX53_PAD_PATA_DATA1__EMI_NANDF_D_1      0xa4
+				MX53_PAD_PATA_DATA2__EMI_NANDF_D_2      0xa4
+				MX53_PAD_PATA_DATA3__EMI_NANDF_D_3      0xa4
+				MX53_PAD_PATA_DATA4__EMI_NANDF_D_4      0xa4
+				MX53_PAD_PATA_DATA5__EMI_NANDF_D_5      0xa4
+				MX53_PAD_PATA_DATA6__EMI_NANDF_D_6      0xa4
+				MX53_PAD_PATA_DATA7__EMI_NANDF_D_7      0xa4
+				MX53_PAD_PATA_DATA8__EMI_NANDF_D_8      0xa4
+				MX53_PAD_PATA_DATA9__EMI_NANDF_D_9      0xa4
+				MX53_PAD_PATA_DATA10__EMI_NANDF_D_10    0xa4
+				MX53_PAD_PATA_DATA11__EMI_NANDF_D_11    0xa4
+				MX53_PAD_PATA_DATA12__EMI_NANDF_D_12    0xa4
+				MX53_PAD_PATA_DATA13__EMI_NANDF_D_13    0xa4
+				MX53_PAD_PATA_DATA14__EMI_NANDF_D_14    0xa4
+				MX53_PAD_PATA_DATA15__EMI_NANDF_D_15    0xa4
+				MX53_PAD_NANDF_CLE__GPIO6_7             0x00000001
+				MX53_PAD_NANDF_WP_B__GPIO6_9            0x00000001
+				MX53_PAD_NANDF_ALE__GPIO6_8             0x00000001
+
+				MX53_PAD_EIM_D23__GPIO3_23 0x80000000
+
+				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
+				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
+				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
+				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
+
+				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+
+				MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
+				MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
+				MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
+				MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
+				MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
+				MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
+
+				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
+				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
+				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
+				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
+				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
+				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
+				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
+				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
+
+				MX53_PAD_CSI0_DAT8__I2C1_SDA		0x400001ec
+				MX53_PAD_CSI0_DAT9__I2C1_SCL		0x400001ec
+
+                                MX53_PAD_KEY_ROW3__I2C2_SDA             0xc0000000
+                                MX53_PAD_KEY_COL3__I2C2_SCL             0xc0000000
+
+				MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK	0x5
+				MX53_PAD_DI0_PIN15__IPU_DI0_PIN15	0x5
+				MX53_PAD_DI0_PIN2__IPU_DI0_PIN2		0x5
+				MX53_PAD_DI0_PIN3__IPU_DI0_PIN3		0x5
+				MX53_PAD_DI0_PIN4__IPU_DI0_PIN4		0x5
+				MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0	0x5
+				MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1	0x5
+				MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2	0x5
+				MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3	0x5
+				MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4	0x5
+				MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5	0x5
+				MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6	0x5
+				MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7	0x5
+				MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8	0x5
+				MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9	0x5
+				MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10	0x5
+				MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11	0x5
+				MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12	0x5
+				MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13	0x5
+				MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14	0x5
+				MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15	0x5
+				MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16	0x5
+				MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17	0x5
+				MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18	0x5
+				MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19	0x5
+				MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20	0x5
+				MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21	0x5
+				MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22	0x5
+				MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23	0x5
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D26__UART2_RXD_MUX	0x1e4
+				MX53_PAD_EIM_D27__UART2_TXD_MUX 0x1e4
+				MX53_PAD_EIM_D28__UART2_RTS 0x1e4
+				MX53_PAD_EIM_D29__UART2_CTS 0x1e4
+			>;
+		};
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	fsl,dte-mode;
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio7 6 0>;
+	status = "okay";
+};

arch/arm/dts/imx53.dtsi

@@ -0,0 +1,110 @@
+/*
+ * Copyright 2016 Beckhoff Automation
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "skeleton.dtsi"
+#include "imx53-pinfunc.h"
+#include <dt-bindings/clock/imx5-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	aliases {
+		serial1 = &uart2;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		aips@50000000 { /* AIPS1 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x50000000 0x10000000>;
+			ranges;
+
+			iomuxc: iomuxc@53fa8000 {
+				compatible = "fsl,imx53-iomuxc";
+				reg = <0x53fa8000 0x4000>;
+			};
+
+			gpr: iomuxc-gpr@53fa8000 {
+				compatible = "fsl,imx53-iomuxc-gpr", "syscon";
+				reg = <0x53fa8000 0xc>;
+			};
+
+			uart2: serial@53fc0000 {
+				compatible = "fsl,imx7d-uart", "fsl,imx53-uart", "fsl,imx21-uart";
+				reg = <0x53fc0000 0x4000>;
+				interrupts = <32>;
+				clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
+				         <&clks IMX5_CLK_UART2_PER_GATE>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 12 4 0>, <&sdma 13 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			clks: ccm@53fd4000{
+				compatible = "fsl,imx53-ccm";
+				reg = <0x53fd4000 0x4000>;
+				interrupts = <0 71 0x04 0 72 0x04>;
+				#clock-cells = <1>;
+			};
+
+			gpio7: gpio@53fe4000 {
+				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
+				reg = <0x53fe4000 0x4000>;
+				interrupts = <107 108>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		aips@60000000 {	/* AIPS2 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x60000000 0x10000000>;
+			ranges;
+
+			sdma: sdma@63fb0000 {
+				compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
+				reg = <0x63fb0000 0x4000>;
+				interrupts = <6>;
+				clocks = <&clks IMX5_CLK_SDMA_GATE>,
+				         <&clks IMX5_CLK_SDMA_GATE>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
+			};
+
+
+			fec: ethernet@63fec000 {
+				compatible = "fsl,imx53-fec", "fsl,imx25-fec";
+				reg = <0x63fec000 0x4000>;
+				interrupts = <87>;
+				clocks = <&clks IMX5_CLK_FEC_GATE>,
+				         <&clks IMX5_CLK_FEC_GATE>,
+				         <&clks IMX5_CLK_FEC_GATE>;
+				clock-names = "ipg", "ahb", "ptp";
+				status = "disabled";
+			};
+		};
+	};
+};

arch/arm/dts/imx6dl-icore-rqs.dts

@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2015 Amarula Solutions B.V.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore-rqs.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 DualLite/Solo RQS Starter Kit";
+	compatible = "engicam,imx6-icore-rqs", "fsl,imx6q";
+};

arch/arm/dts/imx6q-icore-rqs.dts

@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2015 Amarula Solutions B.V.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore-rqs.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 Quad/Dual RQS Starter Kit";
+	compatible = "engicam,imx6-icore-rqs", "fsl,imx6q";
+};

arch/arm/dts/imx6qdl-icore-rqs.dtsi

@@ -0,0 +1,170 @@
+/*
+ * Copyright (C) 2015 Amarula Solutions B.V.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx6qdl-clock.h>
+
+/ {
+	memory {
+		reg = <0x10000000 0x80000000>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-handle = <&eth_phy>;
+	phy-mode = "rgmii";
+	status = "okay";
+
+	mdio {
+		eth_phy: ethernet-phy {
+			rxc-skew-ps = <1140>;
+			txc-skew-ps = <1140>;
+			txen-skew-ps = <600>;
+			rxdv-skew-ps = <240>;
+			rxd0-skew-ps = <420>;
+			rxd1-skew-ps = <600>;
+			rxd2-skew-ps = <420>;
+			rxd3-skew-ps = <240>;
+			txd0-skew-ps = <60>;
+			txd1-skew-ps = <60>;
+			txd2-skew-ps = <60>;
+			txd3-skew-ps = <240>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN     0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL  0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17070
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10070
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17070
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17070
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17070
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17070
+		>;
+	};
+};

arch/arm/dts/imx6qdl-icore.dtsi

@@ -75,6 +75,14 @@
 	assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>;
 };
 
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	phy-mode = "rmii";
+	status = "okay";
+};
+
 &gpmi {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpmi_nand>;
@@ -118,6 +126,22 @@
 };
 
 &iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x1b0b1
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23	0x1b0b0
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
+		>;
+	};
+
 	pinctrl_flexcan1: flexcan1grp {
 		fsl,pins = <
 			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b020

arch/arm/dts/imx6sll-evk.dts

@@ -0,0 +1,801 @@
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6sll.dtsi"
+
+/ {
+	model = "Freescale i.MX6SLL EVK Board";
+	compatible = "fsl,imx6sll-evk", "fsl,imx6sll";
+
+	memory {
+		reg = <0x80000000 0x80000000>;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	battery: max8903@0 {
+		compatible = "fsl,max8903-charger";
+		pinctrl-names = "default";
+		dok_input = <&gpio4 13 1>;
+		uok_input = <&gpio4 13 1>;
+		chg_input = <&gpio4 15 1>;
+		flt_input = <&gpio4 14 1>;
+		fsl,dcm_always_high;
+		fsl,dc_valid;
+		fsl,adc_disable;
+		status = "okay";
+	};
+
+	pxp_v4l2_out {
+		compatible = "fsl,imx6sl-pxp-v4l2";
+		status = "okay";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb_otg1_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb_otg1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb_otg2_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_otg2_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_aud3v: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "wm8962-supply-3v15";
+			regulator-min-microvolt = <3150000>;
+			regulator-max-microvolt = <3150000>;
+			regulator-boot-on;
+		};
+
+		reg_aud4v: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "wm8962-supply-4v2";
+			regulator-min-microvolt = <4325000>;
+			regulator-max-microvolt = <4325000>;
+			regulator-boot-on;
+		};
+
+		reg_lcd: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "lcd-pwr";
+			gpio = <&gpio4 8 0>;
+			enable-active-high;
+		};
+
+		reg_sd1_vmmc: sd1_vmmc {
+			compatible = "regulator-fixed";
+			regulator-name = "SD1_SPWR";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_sd2_vmmc: sd2_vmmc {
+			compatible = "regulator-fixed";
+			regulator-name = "eMMC-VCCQ";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		reg_sd3_vmmc: sd3_vmmc {
+			compatible = "regulator-fixed";
+			regulator-name = "SD3_WIFI";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+	};
+
+	sound {
+		compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		cpu-dai = <&ssi2>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC";
+		mux-int-port = <2>;
+		mux-ext-port = <3>;
+		codec-master;
+		hp-det-gpios = <&gpio4 24 1>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux3>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6SLL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <393216000>;
+};
+
+&cpu0 {
+	arm-supply = <&sw1a_reg>;
+	soc-supply = <&sw1c_reg>;
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pfuze100@08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	max17135: max17135@48 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_max17135>;
+		compatible = "maxim,max17135";
+		reg = <0x48>;
+		status = "okay";
+
+		vneg_pwrup = <1>;
+		gvee_pwrup = <2>;
+		vpos_pwrup = <10>;
+		gvdd_pwrup = <12>;
+		gvdd_pwrdn = <1>;
+		vpos_pwrdn = <2>;
+		gvee_pwrdn = <8>;
+		vneg_pwrdn = <10>;
+		gpio_pmic_pwrgood = <&gpio2 13 0>;
+		gpio_pmic_vcom_ctrl = <&gpio2 3 0>;
+		gpio_pmic_wakeup = <&gpio2 14 0>;
+		gpio_pmic_v3p3 = <&gpio2 7 0>;
+		gpio_pmic_intr = <&gpio2 12 0>;
+
+		regulators {
+			DISPLAY_reg: DISPLAY {
+				regulator-name = "DISPLAY";
+			};
+
+			GVDD_reg: GVDD {
+				/* 20v */
+				regulator-name = "GVDD";
+			};
+
+			GVEE_reg: GVEE {
+				/* -22v */
+				regulator-name = "GVEE";
+			};
+
+			HVINN_reg: HVINN {
+				/* -22v */
+				regulator-name = "HVINN";
+			};
+
+			HVINP_reg: HVINP {
+				/* 20v */
+				regulator-name = "HVINP";
+			};
+
+			VCOM_reg: VCOM {
+				regulator-name = "VCOM";
+				/* 2's-compliment, -4325000 */
+				regulator-min-microvolt = <0xffbe0178>;
+				/* 2's-compliment, -500000 */
+				regulator-max-microvolt = <0xfff85ee0>;
+			};
+
+			VNEG_reg: VNEG {
+				/* -15v */
+				regulator-name = "VNEG";
+			};
+
+			VPOS_reg: VPOS {
+				/* 15v */
+				regulator-name = "VPOS";
+			};
+
+			V3P3_reg: V3P3 {
+				regulator-name = "V3P3";
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	codec: wm8962@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clks IMX6SLL_CLK_EXTERN_AUDIO>;
+		DCVDD-supply = <&vgen3_reg>;
+		DBVDD-supply = <&reg_aud3v>;
+		AVDD-supply = <&vgen3_reg>;
+		CPVDD-supply = <&vgen3_reg>;
+		MICVDD-supply = <&reg_aud3v>;
+		PLLVDD-supply = <&vgen3_reg>;
+		SPKVDD1-supply = <&reg_aud4v>;
+		SPKVDD2-supply = <&reg_aud4v>;
+		amic-mono;
+	};
+};
+
+&gpc {
+	fsl,ldo-bypass = <1>;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6sll-evk {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6SLL_PAD_KEY_ROW7__GPIO4_IO07 0x17059
+				MX6SLL_PAD_GPIO4_IO22__GPIO4_IO22 0x17059
+				MX6SLL_PAD_KEY_COL3__GPIO3_IO30	0x17059
+				/*
+				 * Must set the LVE of pad SD2_RESET, otherwise current
+				 * leakage through eMMC chip will pull high the VCCQ to
+				 * 2.6v, which will impact SD1 and SD3 SD3.0 voltage switch.
+				 */
+				MX6SLL_PAD_SD2_RESET__GPIO4_IO27 0x417059
+				MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x17059
+				MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059 /* SD3 CD */
+				MX6SLL_PAD_KEY_COL6__GPIO4_IO04 0x17059 /*SD3 RESET */
+				MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x17059
+				MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24 0x17059 /* HP DETECT */
+				/* CHG_FLT, CHG_UOK/DOK, CHG_STATUS */
+				MX6SLL_PAD_ECSPI2_MISO__GPIO4_IO14 0x17000
+				MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x17000
+				MX6SLL_PAD_ECSPI2_SS0__GPIO4_IO15  0x17000
+			>;
+		};
+
+		pinctrl_audmux3: audmux3grp {
+			fsl,pins = <
+				MX6SLL_PAD_AUD_TXC__AUD3_TXC		0x4130b0
+				MX6SLL_PAD_AUD_TXFS__AUD3_TXFS		0x4130b0
+				MX6SLL_PAD_AUD_TXD__AUD3_TXD		0x4110b0
+				MX6SLL_PAD_AUD_RXD__AUD3_RXD		0x4130b0
+				MX6SLL_PAD_AUD_MCLK__AUDIO_CLK_OUT	0x4130b0
+			>;
+		};
+
+		pinctrl_csi1: csi1grp {
+			fsl,pins = <
+				MX6SLL_PAD_EPDC_GDRL__CSI_MCLK		0x1b088
+				MX6SLL_PAD_EPDC_GDCLK__CSI_PIXCLK	0x1b088
+				MX6SLL_PAD_EPDC_GDSP__CSI_VSYNC		0x1b088
+				MX6SLL_PAD_EPDC_GDOE__CSI_HSYNC		0x1b088
+				MX6SLL_PAD_EPDC_DATA02__CSI_DATA02	0x1b088
+				MX6SLL_PAD_EPDC_DATA03__CSI_DATA03	0x1b088
+				MX6SLL_PAD_EPDC_DATA04__CSI_DATA04	0x1b088
+				MX6SLL_PAD_EPDC_DATA05__CSI_DATA05	0x1b088
+				MX6SLL_PAD_EPDC_DATA06__CSI_DATA06	0x1b088
+				MX6SLL_PAD_EPDC_DATA07__CSI_DATA07	0x1b088
+				MX6SLL_PAD_EPDC_SDCLK__CSI_DATA08	0x1b088
+				MX6SLL_PAD_EPDC_SDLE__CSI_DATA09	0x1b088
+				MX6SLL_PAD_EPDC_SDSHR__GPIO1_IO26	0x80000000
+				MX6SLL_PAD_EPDC_SDOE__GPIO1_IO25	0x80000000
+			>;
+		};
+
+                pinctrl_epdc0: epdcgrp0 {
+                        fsl,pins = <
+				MX6SLL_PAD_EPDC_DATA00__EPDC_DATA00	0x100b1
+				MX6SLL_PAD_EPDC_DATA01__EPDC_DATA01	0x100b1
+				MX6SLL_PAD_EPDC_DATA02__EPDC_DATA02	0x100b1
+				MX6SLL_PAD_EPDC_DATA03__EPDC_DATA03	0x100b1
+				MX6SLL_PAD_EPDC_DATA04__EPDC_DATA04	0x100b1
+				MX6SLL_PAD_EPDC_DATA05__EPDC_DATA05	0x100b1
+				MX6SLL_PAD_EPDC_DATA06__EPDC_DATA06	0x100b1
+				MX6SLL_PAD_EPDC_DATA07__EPDC_DATA07	0x100b1
+				MX6SLL_PAD_EPDC_DATA08__EPDC_DATA08	0x100b1
+				MX6SLL_PAD_EPDC_DATA09__EPDC_DATA09	0x100b1
+				MX6SLL_PAD_EPDC_DATA10__EPDC_DATA10	0x100b1
+				MX6SLL_PAD_EPDC_DATA11__EPDC_DATA11	0x100b1
+				MX6SLL_PAD_EPDC_DATA12__EPDC_DATA12	0x100b1
+				MX6SLL_PAD_EPDC_DATA13__EPDC_DATA13	0x100b1
+				MX6SLL_PAD_EPDC_DATA14__EPDC_DATA14	0x100b1
+				MX6SLL_PAD_EPDC_DATA15__EPDC_DATA15	0x100b1
+				MX6SLL_PAD_EPDC_SDCLK__EPDC_SDCLK_P	0x100b1
+				MX6SLL_PAD_EPDC_SDLE__EPDC_SDLE		0x100b1
+				MX6SLL_PAD_EPDC_SDOE__EPDC_SDOE		0x100b1
+				MX6SLL_PAD_EPDC_SDSHR__EPDC_SDSHR	0x100b1
+				MX6SLL_PAD_EPDC_SDCE0__EPDC_SDCE0	0x100b1
+				MX6SLL_PAD_EPDC_GDCLK__EPDC_GDCLK	0x100b1
+				MX6SLL_PAD_EPDC_GDOE__EPDC_GDOE		0x100b1
+				MX6SLL_PAD_EPDC_GDRL__EPDC_GDRL		0x100b1
+				MX6SLL_PAD_EPDC_GDSP__EPDC_GDSP		0x100b1
+                       >;
+                };
+
+		pinctrl_lcdif_dat: lcdifdatgrp {
+			fsl,pins = <
+				MX6SLL_PAD_LCD_DATA00__LCD_DATA00	0x79
+				MX6SLL_PAD_LCD_DATA01__LCD_DATA01	0x79
+				MX6SLL_PAD_LCD_DATA02__LCD_DATA02	0x79
+				MX6SLL_PAD_LCD_DATA03__LCD_DATA03	0x79
+				MX6SLL_PAD_LCD_DATA04__LCD_DATA04	0x79
+				MX6SLL_PAD_LCD_DATA05__LCD_DATA05	0x79
+				MX6SLL_PAD_LCD_DATA06__LCD_DATA06	0x79
+				MX6SLL_PAD_LCD_DATA07__LCD_DATA07	0x79
+				MX6SLL_PAD_LCD_DATA08__LCD_DATA08	0x79
+				MX6SLL_PAD_LCD_DATA09__LCD_DATA09	0x79
+				MX6SLL_PAD_LCD_DATA10__LCD_DATA10	0x79
+				MX6SLL_PAD_LCD_DATA11__LCD_DATA11	0x79
+				MX6SLL_PAD_LCD_DATA12__LCD_DATA12	0x79
+				MX6SLL_PAD_LCD_DATA13__LCD_DATA13	0x79
+				MX6SLL_PAD_LCD_DATA14__LCD_DATA14	0x79
+				MX6SLL_PAD_LCD_DATA15__LCD_DATA15	0x79
+				MX6SLL_PAD_LCD_DATA16__LCD_DATA16	0x79
+				MX6SLL_PAD_LCD_DATA17__LCD_DATA17	0x79
+				MX6SLL_PAD_LCD_DATA18__LCD_DATA18	0x79
+				MX6SLL_PAD_LCD_DATA19__LCD_DATA19	0x79
+				MX6SLL_PAD_LCD_DATA20__LCD_DATA20	0x79
+				MX6SLL_PAD_LCD_DATA21__LCD_DATA21	0x79
+				MX6SLL_PAD_LCD_DATA22__LCD_DATA22	0x79
+				MX6SLL_PAD_LCD_DATA23__LCD_DATA23	0x79
+			>;
+		};
+
+		pinctrl_lcdif_ctrl: lcdifctrlgrp {
+			fsl,pins = <
+				MX6SLL_PAD_LCD_CLK__LCD_CLK		0x79
+				MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE	0x79
+				MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC		0x79
+				MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC		0x79
+				MX6SLL_PAD_LCD_RESET__LCD_RESET		0x79
+				MX6SLL_PAD_ECSPI1_SCLK__GPIO4_IO08	0x79
+			>;
+		};
+
+		pinctrl_max17135: max17135grp-1 {
+			fsl,pins = <
+				MX6SLL_PAD_EPDC_PWR_STAT__GPIO2_IO13	0x80000000  /* pwrgood */
+				MX6SLL_PAD_EPDC_VCOM0__GPIO2_IO03	0x80000000  /* vcom_ctrl */
+				MX6SLL_PAD_EPDC_PWR_WAKE__GPIO2_IO14	0x80000000  /* wakeup */
+				MX6SLL_PAD_EPDC_PWR_CTRL0__GPIO2_IO07	0x80000000  /* v3p3 */
+				MX6SLL_PAD_EPDC_PWR_IRQ__GPIO2_IO12	0x80000000  /* pwr int */
+			>;
+		};
+
+		pinctrl_spdif: spdifgrp {
+			fsl,pins = <
+				MX6SLL_PAD_SD2_DATA4__SPDIF_OUT 0x4130b0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1
+				MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX6SLL_PAD_KEY_ROW1__GPIO3_IO27 0x1b0b1  /* bt reg on */
+				MX6SLL_PAD_ECSPI1_MOSI__UART5_DCE_TX 0x1b0b1
+				MX6SLL_PAD_ECSPI1_SCLK__UART5_DCE_RX 0x1b0b1
+				MX6SLL_PAD_ECSPI1_SS0__UART5_DCE_CTS 0x1b0b1
+				MX6SLL_PAD_ECSPI1_MISO__UART5_DCE_RTS 0x1b0b1
+			>;
+		};
+
+		pinctrl_uart5dte: uart5dtegrp {
+			fsl,pins = <
+				MX6SLL_PAD_ECSPI1_MOSI__UART5_DTE_RX 0x1b0b1
+				MX6SLL_PAD_ECSPI1_SCLK__UART5_DTE_TX 0x1b0b1
+				MX6SLL_PAD_ECSPI1_SS0__UART5_DTE_RTS 0x1b0b1
+				MX6SLL_PAD_ECSPI1_MISO__UART5_DTE_CTS 0x1b0b1
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				MX6SLL_PAD_SD1_CMD__SD1_CMD	0x17059
+				MX6SLL_PAD_SD1_CLK__SD1_CLK	0x13059
+				MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x17059
+				MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x17059
+				MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x17059
+				MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x17059
+			>;
+		};
+
+		pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
+			fsl,pins = <
+				MX6SLL_PAD_SD1_CMD__SD1_CMD	0x170b9
+				MX6SLL_PAD_SD1_CLK__SD1_CLK	0x130b9
+				MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x170b9
+				MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x170b9
+				MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x170b9
+				MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x170b9
+			>;
+		};
+
+		pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
+			fsl,pins = <
+				MX6SLL_PAD_SD1_CMD__SD1_CMD	0x170f9
+				MX6SLL_PAD_SD1_CLK__SD1_CLK	0x130f9
+				MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x170f9
+				MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x170f9
+				MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x170f9
+				MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x170f9
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6SLL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6SLL_PAD_SD2_CLK__SD2_CLK		0x13059
+				MX6SLL_PAD_SD2_DATA0__SD2_DATA0 	0x17059
+				MX6SLL_PAD_SD2_DATA1__SD2_DATA1		0x17059
+				MX6SLL_PAD_SD2_DATA2__SD2_DATA2		0x17059
+				MX6SLL_PAD_SD2_DATA3__SD2_DATA3		0x17059
+				MX6SLL_PAD_SD2_DATA4__SD2_DATA4		0x17059
+				MX6SLL_PAD_SD2_DATA5__SD2_DATA5		0x17059
+				MX6SLL_PAD_SD2_DATA6__SD2_DATA6		0x17059
+				MX6SLL_PAD_SD2_DATA7__SD2_DATA7		0x17059
+				MX6SLL_PAD_GPIO4_IO21__SD2_STROBE	0x413059
+			>;
+		};
+
+		pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
+			fsl,pins = <
+				MX6SLL_PAD_SD2_CMD__SD2_CMD		0x170b9
+				MX6SLL_PAD_SD2_CLK__SD2_CLK		0x130b9
+				MX6SLL_PAD_SD2_DATA0__SD2_DATA0 	0x170b9
+				MX6SLL_PAD_SD2_DATA1__SD2_DATA1		0x170b9
+				MX6SLL_PAD_SD2_DATA2__SD2_DATA2		0x170b9
+				MX6SLL_PAD_SD2_DATA3__SD2_DATA3		0x170b9
+				MX6SLL_PAD_SD2_DATA4__SD2_DATA4		0x170b9
+				MX6SLL_PAD_SD2_DATA5__SD2_DATA5		0x170b9
+				MX6SLL_PAD_SD2_DATA6__SD2_DATA6		0x170b9
+				MX6SLL_PAD_SD2_DATA7__SD2_DATA7		0x170b9
+				MX6SLL_PAD_GPIO4_IO21__SD2_STROBE	0x4130b9
+			>;
+		};
+
+		pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
+			fsl,pins = <
+				MX6SLL_PAD_SD2_CMD__SD2_CMD		0x170f9
+				MX6SLL_PAD_SD2_CLK__SD2_CLK		0x130f9
+				MX6SLL_PAD_SD2_DATA0__SD2_DATA0 	0x170f9
+				MX6SLL_PAD_SD2_DATA1__SD2_DATA1		0x170f9
+				MX6SLL_PAD_SD2_DATA2__SD2_DATA2		0x170f9
+				MX6SLL_PAD_SD2_DATA3__SD2_DATA3		0x170f9
+				MX6SLL_PAD_SD2_DATA4__SD2_DATA4		0x170f9
+				MX6SLL_PAD_SD2_DATA5__SD2_DATA5		0x170f9
+				MX6SLL_PAD_SD2_DATA6__SD2_DATA6		0x170f9
+				MX6SLL_PAD_SD2_DATA7__SD2_DATA7		0x170f9
+				MX6SLL_PAD_GPIO4_IO21__SD2_STROBE	0x4130f9
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6SLL_PAD_SD3_CMD__SD3_CMD	0x17059
+				MX6SLL_PAD_SD3_CLK__SD3_CLK	0x13059
+				MX6SLL_PAD_SD3_DATA0__SD3_DATA0	0x17059
+				MX6SLL_PAD_SD3_DATA1__SD3_DATA1	0x17059
+				MX6SLL_PAD_SD3_DATA2__SD3_DATA2	0x17059
+				MX6SLL_PAD_SD3_DATA3__SD3_DATA3	0x17059
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+			fsl,pins = <
+				MX6SLL_PAD_SD3_CMD__SD3_CMD	0x170b9
+				MX6SLL_PAD_SD3_CLK__SD3_CLK	0x130b9
+				MX6SLL_PAD_SD3_DATA0__SD3_DATA0	0x170b9
+				MX6SLL_PAD_SD3_DATA1__SD3_DATA1	0x170b9
+				MX6SLL_PAD_SD3_DATA2__SD3_DATA2	0x170b9
+				MX6SLL_PAD_SD3_DATA3__SD3_DATA3	0x170b9
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+			fsl,pins = <
+				MX6SLL_PAD_SD3_CMD__SD3_CMD	0x170f9
+				MX6SLL_PAD_SD3_CLK__SD3_CLK	0x130f9
+				MX6SLL_PAD_SD3_DATA0__SD3_DATA0	0x170f9
+				MX6SLL_PAD_SD3_DATA1__SD3_DATA1	0x170f9
+				MX6SLL_PAD_SD3_DATA2__SD3_DATA2	0x170f9
+				MX6SLL_PAD_SD3_DATA3__SD3_DATA3	0x170f9
+			>;
+		};
+
+		pinctrl_usbotg1: usbotg1grp {
+			fsl,pins = <
+				MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6SLL_PAD_I2C1_SCL__I2C1_SCL	 0x4001b8b1
+				MX6SLL_PAD_I2C1_SDA__I2C1_SDA	 0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6SLL_PAD_AUD_RXFS__I2C3_SCL  0x4041b8b1
+				MX6SLL_PAD_AUD_RXC__I2C3_SDA   0x4041b8b1
+			>;
+		};
+
+		pinctrl_pwm1: pmw1grp {
+			fsl,pins = <
+				MX6SLL_PAD_PWM1__PWM1_OUT   0x110b0
+			>;
+		};
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat
+		     &pinctrl_lcdif_ctrl>;
+	lcd-supply = <&reg_lcd>;
+	display = <&display>;
+	status = "okay";
+
+	display: display {
+		bits-per-pixel = <16>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <33500000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <89>;
+				hfront-porch = <164>;
+				vback-porch = <23>;
+				vfront-porch = <10>;
+				hsync-len = <10>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&pxp {
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	fsl,uart-has-rtscts;
+	/* for DTE mode, add below change */
+	/* fsl,dte-mode; */
+	/* pinctrl-0 = <&pinctrl_uart5dte>; */
+	status = "disabled";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
+	vmmc-supply = <&reg_sd1_vmmc>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	vqmmc-supply = <&reg_sd2_vmmc>;
+	bus-width = <8>;
+	no-removable;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
+	vmmc-supply = <&reg_sd3_vmmc>;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	disable-over-current;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&epdc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_epdc0>;
+	V3P3-supply = <&V3P3_reg>;
+	VCOM-supply = <&VCOM_reg>;
+	DISPLAY-supply = <&DISPLAY_reg>;
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};

arch/arm/dts/imx6sll-pinfunc.h

@@ -0,0 +1,882 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DTS_IMX6SLL_PINFUNC_H
+#define __DTS_IMX6SLL_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX6SLL_PAD_WDOG_B__WDOG1_B                                0x0014 0x02DC 0x0000 0x0 0x0
+#define MX6SLL_PAD_WDOG_B__WDOG1_RESET_B_DEB                      0x0014 0x02DC 0x0000 0x1 0x0
+#define MX6SLL_PAD_WDOG_B__UART5_RI_B                             0x0014 0x02DC 0x0000 0x2 0x0
+#define MX6SLL_PAD_WDOG_B__GPIO3_IO18                             0x0014 0x02DC 0x0000 0x5 0x0
+#define MX6SLL_PAD_REF_CLK_24M__XTALOSC_REF_CLK_24M               0x0018 0x02E0 0x0000 0x0 0x0
+#define MX6SLL_PAD_REF_CLK_24M__I2C3_SCL                          0x0018 0x02E0 0x068C 0x1 0x0
+#define MX6SLL_PAD_REF_CLK_24M__PWM3_OUT                          0x0018 0x02E0 0x0000 0x2 0x0
+#define MX6SLL_PAD_REF_CLK_24M__USB_OTG2_ID                       0x0018 0x02E0 0x0560 0x3 0x0
+#define MX6SLL_PAD_REF_CLK_24M__CCM_PMIC_READY                    0x0018 0x02E0 0x05AC 0x4 0x0
+#define MX6SLL_PAD_REF_CLK_24M__GPIO3_IO21                        0x0018 0x02E0 0x0000 0x5 0x0
+#define MX6SLL_PAD_REF_CLK_24M__SD3_WP                            0x0018 0x02E0 0x0794 0x6 0x0
+#define MX6SLL_PAD_REF_CLK_32K__XTALOSC_REF_CLK_32K               0x001C 0x02E4 0x0000 0x0 0x0
+#define MX6SLL_PAD_REF_CLK_32K__I2C3_SDA                          0x001C 0x02E4 0x0690 0x1 0x0
+#define MX6SLL_PAD_REF_CLK_32K__PWM4_OUT                          0x001C 0x02E4 0x0000 0x2 0x0
+#define MX6SLL_PAD_REF_CLK_32K__USB_OTG1_ID                       0x001C 0x02E4 0x055C 0x3 0x0
+#define MX6SLL_PAD_REF_CLK_32K__SD1_LCTL                          0x001C 0x02E4 0x0000 0x4 0x0
+#define MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22                        0x001C 0x02E4 0x0000 0x5 0x0
+#define MX6SLL_PAD_REF_CLK_32K__SD3_CD_B                          0x001C 0x02E4 0x0780 0x6 0x0
+#define MX6SLL_PAD_PWM1__PWM1_OUT                                 0x0020 0x02E8 0x0000 0x0 0x0
+#define MX6SLL_PAD_PWM1__CCM_CLKO                                 0x0020 0x02E8 0x0000 0x1 0x0
+#define MX6SLL_PAD_PWM1__AUDIO_CLK_OUT                            0x0020 0x02E8 0x0000 0x2 0x0
+#define MX6SLL_PAD_PWM1__CSI_MCLK                                 0x0020 0x02E8 0x0000 0x4 0x0
+#define MX6SLL_PAD_PWM1__GPIO3_IO23                               0x0020 0x02E8 0x0000 0x5 0x0
+#define MX6SLL_PAD_PWM1__EPIT1_OUT                                0x0020 0x02E8 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_COL0__KEY_COL0                             0x0024 0x02EC 0x06A0 0x0 0x0
+#define MX6SLL_PAD_KEY_COL0__I2C2_SCL                             0x0024 0x02EC 0x0684 0x1 0x0
+#define MX6SLL_PAD_KEY_COL0__LCD_DATA00                           0x0024 0x02EC 0x06D8 0x2 0x0
+#define MX6SLL_PAD_KEY_COL0__SD1_CD_B                             0x0024 0x02EC 0x0770 0x4 0x1
+#define MX6SLL_PAD_KEY_COL0__GPIO3_IO24                           0x0024 0x02EC 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW0__KEY_ROW0                             0x0028 0x02F0 0x06C0 0x0 0x0
+#define MX6SLL_PAD_KEY_ROW0__I2C2_SDA                             0x0028 0x02F0 0x0688 0x1 0x0
+#define MX6SLL_PAD_KEY_ROW0__LCD_DATA01                           0x0028 0x02F0 0x06DC 0x2 0x0
+#define MX6SLL_PAD_KEY_ROW0__SD1_WP                               0x0028 0x02F0 0x0774 0x4 0x1
+#define MX6SLL_PAD_KEY_ROW0__GPIO3_IO25                           0x0028 0x02F0 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL1__KEY_COL1                             0x002C 0x02F4 0x06A4 0x0 0x0
+#define MX6SLL_PAD_KEY_COL1__ECSPI4_MOSI                          0x002C 0x02F4 0x0658 0x1 0x1
+#define MX6SLL_PAD_KEY_COL1__LCD_DATA02                           0x002C 0x02F4 0x06E0 0x2 0x0
+#define MX6SLL_PAD_KEY_COL1__SD3_DATA4                            0x002C 0x02F4 0x0784 0x4 0x0
+#define MX6SLL_PAD_KEY_COL1__GPIO3_IO26                           0x002C 0x02F4 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW1__KEY_ROW1                             0x0030 0x02F8 0x06C4 0x0 0x0
+#define MX6SLL_PAD_KEY_ROW1__ECSPI4_MISO                          0x0030 0x02F8 0x0654 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW1__LCD_DATA03                           0x0030 0x02F8 0x06E4 0x2 0x0
+#define MX6SLL_PAD_KEY_ROW1__CSI_FIELD                            0x0030 0x02F8 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW1__SD3_DATA5                            0x0030 0x02F8 0x0788 0x4 0x0
+#define MX6SLL_PAD_KEY_ROW1__GPIO3_IO27                           0x0030 0x02F8 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL2__KEY_COL2                             0x0034 0x02FC 0x06A8 0x0 0x0
+#define MX6SLL_PAD_KEY_COL2__ECSPI4_SS0                           0x0034 0x02FC 0x065C 0x1 0x1
+#define MX6SLL_PAD_KEY_COL2__LCD_DATA04                           0x0034 0x02FC 0x06E8 0x2 0x0
+#define MX6SLL_PAD_KEY_COL2__CSI_DATA12                           0x0034 0x02FC 0x05B8 0x3 0x1
+#define MX6SLL_PAD_KEY_COL2__SD3_DATA6                            0x0034 0x02FC 0x078C 0x4 0x0
+#define MX6SLL_PAD_KEY_COL2__GPIO3_IO28                           0x0034 0x02FC 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW2__KEY_ROW2                             0x0038 0x0300 0x06C8 0x0 0x0
+#define MX6SLL_PAD_KEY_ROW2__ECSPI4_SCLK                          0x0038 0x0300 0x0650 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW2__LCD_DATA05                           0x0038 0x0300 0x06EC 0x2 0x0
+#define MX6SLL_PAD_KEY_ROW2__CSI_DATA13                           0x0038 0x0300 0x05BC 0x3 0x1
+#define MX6SLL_PAD_KEY_ROW2__SD3_DATA7                            0x0038 0x0300 0x0790 0x4 0x0
+#define MX6SLL_PAD_KEY_ROW2__GPIO3_IO29                           0x0038 0x0300 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL3__KEY_COL3                             0x003C 0x0304 0x06AC 0x0 0x0
+#define MX6SLL_PAD_KEY_COL3__AUD6_RXFS                            0x003C 0x0304 0x05A0 0x1 0x1
+#define MX6SLL_PAD_KEY_COL3__LCD_DATA06                           0x003C 0x0304 0x06F0 0x2 0x0
+#define MX6SLL_PAD_KEY_COL3__CSI_DATA14                           0x003C 0x0304 0x05C0 0x3 0x1
+#define MX6SLL_PAD_KEY_COL3__GPIO3_IO30                           0x003C 0x0304 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL3__SD1_RESET                            0x003C 0x0304 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_ROW3__KEY_ROW3                             0x0040 0x0308 0x06CC 0x0 0x1
+#define MX6SLL_PAD_KEY_ROW3__AUD6_RXC                             0x0040 0x0308 0x059C 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW3__LCD_DATA07                           0x0040 0x0308 0x06F4 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW3__CSI_DATA15                           0x0040 0x0308 0x05C4 0x3 0x2
+#define MX6SLL_PAD_KEY_ROW3__GPIO3_IO31                           0x0040 0x0308 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW3__SD1_VSELECT                          0x0040 0x0308 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_COL4__KEY_COL4                             0x0044 0x030C 0x06B0 0x0 0x1
+#define MX6SLL_PAD_KEY_COL4__AUD6_RXD                             0x0044 0x030C 0x0594 0x1 0x1
+#define MX6SLL_PAD_KEY_COL4__LCD_DATA08                           0x0044 0x030C 0x06F8 0x2 0x1
+#define MX6SLL_PAD_KEY_COL4__CSI_DATA16                           0x0044 0x030C 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_COL4__GPIO4_IO00                           0x0044 0x030C 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL4__USB_OTG1_PWR                         0x0044 0x030C 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_ROW4__KEY_ROW4                             0x0048 0x0310 0x06D0 0x0 0x1
+#define MX6SLL_PAD_KEY_ROW4__AUD6_TXC                             0x0048 0x0310 0x05A4 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW4__LCD_DATA09                           0x0048 0x0310 0x06FC 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW4__CSI_DATA17                           0x0048 0x0310 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW4__GPIO4_IO01                           0x0048 0x0310 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW4__USB_OTG1_OC                          0x0048 0x0310 0x076C 0x6 0x2
+#define MX6SLL_PAD_KEY_COL5__KEY_COL5                             0x004C 0x0314 0x0694 0x0 0x1
+#define MX6SLL_PAD_KEY_COL5__AUD6_TXFS                            0x004C 0x0314 0x05A8 0x1 0x1
+#define MX6SLL_PAD_KEY_COL5__LCD_DATA10                           0x004C 0x0314 0x0700 0x2 0x0
+#define MX6SLL_PAD_KEY_COL5__CSI_DATA18                           0x004C 0x0314 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_COL5__GPIO4_IO02                           0x004C 0x0314 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL5__USB_OTG2_PWR                         0x004C 0x0314 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_ROW5__KEY_ROW5                             0x0050 0x0318 0x06B4 0x0 0x2
+#define MX6SLL_PAD_KEY_ROW5__AUD6_TXD                             0x0050 0x0318 0x0598 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW5__LCD_DATA11                           0x0050 0x0318 0x0704 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW5__CSI_DATA19                           0x0050 0x0318 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW5__GPIO4_IO03                           0x0050 0x0318 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW5__USB_OTG2_OC                          0x0050 0x0318 0x0768 0x6 0x3
+#define MX6SLL_PAD_KEY_COL6__KEY_COL6                             0x0054 0x031C 0x0698 0x0 0x2
+#define MX6SLL_PAD_KEY_COL6__UART4_DCE_RX                         0x0054 0x031C 0x075C 0x1 0x2
+#define MX6SLL_PAD_KEY_COL6__UART4_DTE_TX                         0x0054 0x031C 0x0000 0x1 0x0
+#define MX6SLL_PAD_KEY_COL6__LCD_DATA12                           0x0054 0x031C 0x0708 0x2 0x1
+#define MX6SLL_PAD_KEY_COL6__CSI_DATA20                           0x0054 0x031C 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_COL6__GPIO4_IO04                           0x0054 0x031C 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL6__SD3_RESET                            0x0054 0x031C 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_ROW6__KEY_ROW6                             0x0058 0x0320 0x06B8 0x0 0x2
+#define MX6SLL_PAD_KEY_ROW6__UART4_DCE_TX                         0x0058 0x0320 0x0000 0x1 0x0
+#define MX6SLL_PAD_KEY_ROW6__UART4_DTE_RX                         0x0058 0x0320 0x075C 0x1 0x3
+#define MX6SLL_PAD_KEY_ROW6__LCD_DATA13                           0x0058 0x0320 0x070C 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW6__CSI_DATA21                           0x0058 0x0320 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW6__GPIO4_IO05                           0x0058 0x0320 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW6__SD3_VSELECT                          0x0058 0x0320 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_COL7__KEY_COL7                             0x005C 0x0324 0x069C 0x0 0x2
+#define MX6SLL_PAD_KEY_COL7__UART4_DCE_RTS                        0x005C 0x0324 0x0758 0x1 0x2
+#define MX6SLL_PAD_KEY_COL7__UART4_DTE_CTS                        0x005C 0x0324 0x0000 0x1 0x0
+#define MX6SLL_PAD_KEY_COL7__LCD_DATA14                           0x005C 0x0324 0x0710 0x2 0x1
+#define MX6SLL_PAD_KEY_COL7__CSI_DATA22                           0x005C 0x0324 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_COL7__GPIO4_IO06                           0x005C 0x0324 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL7__SD1_WP                               0x005C 0x0324 0x0774 0x6 0x3
+#define MX6SLL_PAD_KEY_ROW7__KEY_ROW7                             0x0060 0x0328 0x06BC 0x0 0x2
+#define MX6SLL_PAD_KEY_ROW7__UART4_DCE_CTS                        0x0060 0x0328 0x0000 0x1 0x0
+#define MX6SLL_PAD_KEY_ROW7__UART4_DTE_RTS                        0x0060 0x0328 0x0758 0x1 0x3
+#define MX6SLL_PAD_KEY_ROW7__LCD_DATA15                           0x0060 0x0328 0x0714 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW7__CSI_DATA23                           0x0060 0x0328 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW7__GPIO4_IO07                           0x0060 0x0328 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW7__SD1_CD_B                             0x0060 0x0328 0x0770 0x6 0x3
+#define MX6SLL_PAD_EPDC_DATA00__EPDC_DATA00                       0x0064 0x032C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA00__ECSPI4_MOSI                       0x0064 0x032C 0x0658 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA00__LCD_DATA24                        0x0064 0x032C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA00__CSI_DATA00                        0x0064 0x032C 0x05C8 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA00__GPIO1_IO07                        0x0064 0x032C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA01__EPDC_DATA01                       0x0068 0x0330 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA01__ECSPI4_MISO                       0x0068 0x0330 0x0654 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA01__LCD_DATA25                        0x0068 0x0330 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA01__CSI_DATA01                        0x0068 0x0330 0x05CC 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA01__GPIO1_IO08                        0x0068 0x0330 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA02__EPDC_DATA02                       0x006C 0x0334 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA02__ECSPI4_SS0                        0x006C 0x0334 0x065C 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA02__LCD_DATA26                        0x006C 0x0334 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA02__CSI_DATA02                        0x006C 0x0334 0x05D0 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA02__GPIO1_IO09                        0x006C 0x0334 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA03__EPDC_DATA03                       0x0070 0x0338 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA03__ECSPI4_SCLK                       0x0070 0x0338 0x0650 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA03__LCD_DATA27                        0x0070 0x0338 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA03__CSI_DATA03                        0x0070 0x0338 0x05D4 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA03__GPIO1_IO10                        0x0070 0x0338 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA04__EPDC_DATA04                       0x0074 0x033C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA04__ECSPI4_SS1                        0x0074 0x033C 0x0660 0x1 0x1
+#define MX6SLL_PAD_EPDC_DATA04__LCD_DATA28                        0x0074 0x033C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA04__CSI_DATA04                        0x0074 0x033C 0x05D8 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA04__GPIO1_IO11                        0x0074 0x033C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA05__EPDC_DATA05                       0x0078 0x0340 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA05__ECSPI4_SS2                        0x0078 0x0340 0x0664 0x1 0x1
+#define MX6SLL_PAD_EPDC_DATA05__LCD_DATA29                        0x0078 0x0340 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA05__CSI_DATA05                        0x0078 0x0340 0x05DC 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA05__GPIO1_IO12                        0x0078 0x0340 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA06__EPDC_DATA06                       0x007C 0x0344 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA06__ECSPI4_SS3                        0x007C 0x0344 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA06__LCD_DATA30                        0x007C 0x0344 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA06__CSI_DATA06                        0x007C 0x0344 0x05E0 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA06__GPIO1_IO13                        0x007C 0x0344 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA07__EPDC_DATA07                       0x0080 0x0348 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA07__ECSPI4_RDY                        0x0080 0x0348 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA07__LCD_DATA31                        0x0080 0x0348 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA07__CSI_DATA07                        0x0080 0x0348 0x05E4 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA07__GPIO1_IO14                        0x0080 0x0348 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA08__EPDC_DATA08                       0x0084 0x034C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA08__ECSPI3_MOSI                       0x0084 0x034C 0x063C 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA08__EPDC_PWR_CTRL0                    0x0084 0x034C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA08__GPIO1_IO15                        0x0084 0x034C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA09__EPDC_DATA09                       0x0088 0x0350 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA09__ECSPI3_MISO                       0x0088 0x0350 0x0638 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA09__EPDC_PWR_CTRL1                    0x0088 0x0350 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA09__GPIO1_IO16                        0x0088 0x0350 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA10__EPDC_DATA10                       0x008C 0x0354 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA10__ECSPI3_SS0                        0x008C 0x0354 0x0648 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA10__EPDC_PWR_CTRL2                    0x008C 0x0354 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA10__GPIO1_IO17                        0x008C 0x0354 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA11__EPDC_DATA11                       0x0090 0x0358 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA11__ECSPI3_SCLK                       0x0090 0x0358 0x0630 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA11__EPDC_PWR_CTRL3                    0x0090 0x0358 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA11__GPIO1_IO18                        0x0090 0x0358 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA12__EPDC_DATA12                       0x0094 0x035C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA12__UART2_DCE_RX                      0x0094 0x035C 0x074C 0x1 0x4
+#define MX6SLL_PAD_EPDC_DATA12__UART2_DTE_TX                      0x0094 0x035C 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA12__EPDC_PWR_COM                      0x0094 0x035C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA12__GPIO1_IO19                        0x0094 0x035C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA12__ECSPI3_SS1                        0x0094 0x035C 0x064C 0x6 0x1
+#define MX6SLL_PAD_EPDC_DATA13__EPDC_DATA13                       0x0098 0x0360 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA13__UART2_DCE_TX                      0x0098 0x0360 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA13__UART2_DTE_RX                      0x0098 0x0360 0x074C 0x1 0x5
+#define MX6SLL_PAD_EPDC_DATA13__EPDC_PWR_IRQ                      0x0098 0x0360 0x0668 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA13__GPIO1_IO20                        0x0098 0x0360 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA13__ECSPI3_SS2                        0x0098 0x0360 0x0640 0x6 0x1
+#define MX6SLL_PAD_EPDC_DATA14__EPDC_DATA14                       0x009C 0x0364 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA14__UART2_DCE_RTS                     0x009C 0x0364 0x0748 0x1 0x4
+#define MX6SLL_PAD_EPDC_DATA14__UART2_DTE_CTS                     0x009C 0x0364 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA14__EPDC_PWR_STAT                     0x009C 0x0364 0x066C 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA14__GPIO1_IO21                        0x009C 0x0364 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA14__ECSPI3_SS3                        0x009C 0x0364 0x0644 0x6 0x1
+#define MX6SLL_PAD_EPDC_DATA15__EPDC_DATA15                       0x00A0 0x0368 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA15__UART2_DCE_CTS                     0x00A0 0x0368 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA15__UART2_DTE_RTS                     0x00A0 0x0368 0x0748 0x1 0x5
+#define MX6SLL_PAD_EPDC_DATA15__EPDC_PWR_WAKE                     0x00A0 0x0368 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA15__GPIO1_IO22                        0x00A0 0x0368 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA15__ECSPI3_RDY                        0x00A0 0x0368 0x0634 0x6 0x1
+#define MX6SLL_PAD_EPDC_SDCLK__EPDC_SDCLK_P                       0x00A4 0x036C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCLK__ECSPI2_MOSI                        0x00A4 0x036C 0x0624 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDCLK__I2C2_SCL                           0x00A4 0x036C 0x0684 0x2 0x2
+#define MX6SLL_PAD_EPDC_SDCLK__CSI_DATA08                         0x00A4 0x036C 0x05E8 0x3 0x2
+#define MX6SLL_PAD_EPDC_SDCLK__GPIO1_IO23                         0x00A4 0x036C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDLE__EPDC_SDLE                           0x00A8 0x0370 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDLE__ECSPI2_MISO                         0x00A8 0x0370 0x0620 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDLE__I2C2_SDA                            0x00A8 0x0370 0x0688 0x2 0x2
+#define MX6SLL_PAD_EPDC_SDLE__CSI_DATA09                          0x00A8 0x0370 0x05EC 0x3 0x2
+#define MX6SLL_PAD_EPDC_SDLE__GPIO1_IO24                          0x00A8 0x0370 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDOE__EPDC_SDOE                           0x00AC 0x0374 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDOE__ECSPI2_SS0                          0x00AC 0x0374 0x0628 0x1 0x1
+#define MX6SLL_PAD_EPDC_SDOE__CSI_DATA10                          0x00AC 0x0374 0x05B0 0x3 0x2
+#define MX6SLL_PAD_EPDC_SDOE__GPIO1_IO25                          0x00AC 0x0374 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDSHR__EPDC_SDSHR                         0x00B0 0x0378 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDSHR__ECSPI2_SCLK                        0x00B0 0x0378 0x061C 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDSHR__EPDC_SDCE4                         0x00B0 0x0378 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDSHR__CSI_DATA11                         0x00B0 0x0378 0x05B4 0x3 0x2
+#define MX6SLL_PAD_EPDC_SDSHR__GPIO1_IO26                         0x00B0 0x0378 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDCE0__EPDC_SDCE0                         0x00B4 0x037C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCE0__ECSPI2_SS1                         0x00B4 0x037C 0x062C 0x1 0x1
+#define MX6SLL_PAD_EPDC_SDCE0__PWM3_OUT                           0x00B4 0x037C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDCE0__GPIO1_IO27                         0x00B4 0x037C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDCE1__EPDC_SDCE1                         0x00B8 0x0380 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCE1__WDOG2_B                            0x00B8 0x0380 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_SDCE1__PWM4_OUT                           0x00B8 0x0380 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDCE1__GPIO1_IO28                         0x00B8 0x0380 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDCE2__EPDC_SDCE2                         0x00BC 0x0384 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCE2__I2C3_SCL                           0x00BC 0x0384 0x068C 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDCE2__PWM1_OUT                           0x00BC 0x0384 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDCE2__GPIO1_IO29                         0x00BC 0x0384 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDCE3__EPDC_SDCE3                         0x00C0 0x0388 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCE3__I2C3_SDA                           0x00C0 0x0388 0x0690 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDCE3__PWM2_OUT                           0x00C0 0x0388 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDCE3__GPIO1_IO30                         0x00C0 0x0388 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDCLK__EPDC_GDCLK                         0x00C4 0x038C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_GDCLK__ECSPI2_SS2                         0x00C4 0x038C 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_GDCLK__CSI_PIXCLK                         0x00C4 0x038C 0x05F4 0x3 0x2
+#define MX6SLL_PAD_EPDC_GDCLK__GPIO1_IO31                         0x00C4 0x038C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDCLK__SD2_RESET                          0x00C4 0x038C 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_GDOE__EPDC_GDOE                           0x00C8 0x0390 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_GDOE__ECSPI2_SS3                          0x00C8 0x0390 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_GDOE__CSI_HSYNC                           0x00C8 0x0390 0x05F0 0x3 0x2
+#define MX6SLL_PAD_EPDC_GDOE__GPIO2_IO00                          0x00C8 0x0390 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDOE__SD2_VSELECT                         0x00C8 0x0390 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_GDRL__EPDC_GDRL                           0x00CC 0x0394 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_GDRL__ECSPI2_RDY                          0x00CC 0x0394 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_GDRL__CSI_MCLK                            0x00CC 0x0394 0x0000 0x3 0x0
+#define MX6SLL_PAD_EPDC_GDRL__GPIO2_IO01                          0x00CC 0x0394 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDRL__SD2_WP                              0x00CC 0x0394 0x077C 0x6 0x2
+#define MX6SLL_PAD_EPDC_GDSP__EPDC_GDSP                           0x00D0 0x0398 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_GDSP__PWM4_OUT                            0x00D0 0x0398 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_GDSP__CSI_VSYNC                           0x00D0 0x0398 0x05F8 0x3 0x2
+#define MX6SLL_PAD_EPDC_GDSP__GPIO2_IO02                          0x00D0 0x0398 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDSP__SD2_CD_B                            0x00D0 0x0398 0x0778 0x6 0x2
+#define MX6SLL_PAD_EPDC_VCOM0__EPDC_VCOM0                         0x00D4 0x039C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_VCOM0__AUD5_RXFS                          0x00D4 0x039C 0x0588 0x1 0x1
+#define MX6SLL_PAD_EPDC_VCOM0__UART3_DCE_RX                       0x00D4 0x039C 0x0754 0x2 0x4
+#define MX6SLL_PAD_EPDC_VCOM0__UART3_DTE_TX                       0x00D4 0x039C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_VCOM0__GPIO2_IO03                         0x00D4 0x039C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_VCOM0__EPDC_SDCE5                         0x00D4 0x039C 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_VCOM1__EPDC_VCOM1                         0x00D8 0x03A0 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_VCOM1__AUD5_RXD                           0x00D8 0x03A0 0x057C 0x1 0x1
+#define MX6SLL_PAD_EPDC_VCOM1__UART3_DCE_TX                       0x00D8 0x03A0 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_VCOM1__UART3_DTE_RX                       0x00D8 0x03A0 0x0754 0x2 0x5
+#define MX6SLL_PAD_EPDC_VCOM1__GPIO2_IO04                         0x00D8 0x03A0 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_VCOM1__EPDC_SDCE6                         0x00D8 0x03A0 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_BDR0__EPDC_BDR0                           0x00DC 0x03A4 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_BDR0__UART3_DCE_RTS                       0x00DC 0x03A4 0x0750 0x2 0x2
+#define MX6SLL_PAD_EPDC_BDR0__UART3_DTE_CTS                       0x00DC 0x03A4 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_BDR0__GPIO2_IO05                          0x00DC 0x03A4 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_BDR0__EPDC_SDCE7                          0x00DC 0x03A4 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_BDR1__EPDC_BDR1                           0x00E0 0x03A8 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_BDR1__UART3_DCE_CTS                       0x00E0 0x03A8 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_BDR1__UART3_DTE_RTS                       0x00E0 0x03A8 0x0750 0x2 0x3
+#define MX6SLL_PAD_EPDC_BDR1__GPIO2_IO06                          0x00E0 0x03A8 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_BDR1__EPDC_SDCE8                          0x00E0 0x03A8 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL0__EPDC_PWR_CTRL0                 0x00E4 0x03AC 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL0__AUD5_RXC                       0x00E4 0x03AC 0x0584 0x1 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL0__LCD_DATA16                     0x00E4 0x03AC 0x0718 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL0__GPIO2_IO07                     0x00E4 0x03AC 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL1__EPDC_PWR_CTRL1                 0x00E8 0x03B0 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL1__AUD5_TXFS                      0x00E8 0x03B0 0x0590 0x1 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL1__LCD_DATA17                     0x00E8 0x03B0 0x071C 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL1__GPIO2_IO08                     0x00E8 0x03B0 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL2__EPDC_PWR_CTRL2                 0x00EC 0x03B4 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL2__AUD5_TXD                       0x00EC 0x03B4 0x0580 0x1 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL2__LCD_DATA18                     0x00EC 0x03B4 0x0720 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL2__GPIO2_IO09                     0x00EC 0x03B4 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL3__EPDC_PWR_CTRL3                 0x00F0 0x03B8 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL3__AUD5_TXC                       0x00F0 0x03B8 0x058C 0x1 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL3__LCD_DATA19                     0x00F0 0x03B8 0x0724 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL3__GPIO2_IO10                     0x00F0 0x03B8 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_COM__EPDC_PWR_COM                     0x00F4 0x03BC 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_COM__LCD_DATA20                       0x00F4 0x03BC 0x0728 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID                      0x00F4 0x03BC 0x055C 0x4 0x4
+#define MX6SLL_PAD_EPDC_PWR_COM__GPIO2_IO11                       0x00F4 0x03BC 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_COM__SD3_RESET                        0x00F4 0x03BC 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_PWR_IRQ__EPDC_PWR_IRQ                     0x00F8 0x03C0 0x0668 0x0 0x1
+#define MX6SLL_PAD_EPDC_PWR_IRQ__LCD_DATA21                       0x00F8 0x03C0 0x072C 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_IRQ__USB_OTG2_ID                      0x00F8 0x03C0 0x0560 0x4 0x3
+#define MX6SLL_PAD_EPDC_PWR_IRQ__GPIO2_IO12                       0x00F8 0x03C0 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_IRQ__SD3_VSELECT                      0x00F8 0x03C0 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_PWR_STAT__EPDC_PWR_STAT                   0x00FC 0x03C4 0x066C 0x0 0x1
+#define MX6SLL_PAD_EPDC_PWR_STAT__LCD_DATA22                      0x00FC 0x03C4 0x0730 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_STAT__ARM_EVENTI                      0x00FC 0x03C4 0x0000 0x4 0x0
+#define MX6SLL_PAD_EPDC_PWR_STAT__GPIO2_IO13                      0x00FC 0x03C4 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_STAT__SD3_WP                          0x00FC 0x03C4 0x0794 0x6 0x2
+#define MX6SLL_PAD_EPDC_PWR_WAKE__EPDC_PWR_WAKE                   0x0100 0x03C8 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_WAKE__LCD_DATA23                      0x0100 0x03C8 0x0734 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_WAKE__ARM_EVENTO                      0x0100 0x03C8 0x0000 0x4 0x0
+#define MX6SLL_PAD_EPDC_PWR_WAKE__GPIO2_IO14                      0x0100 0x03C8 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_WAKE__SD3_CD_B                        0x0100 0x03C8 0x0780 0x6 0x2
+#define MX6SLL_PAD_LCD_CLK__LCD_CLK                               0x0104 0x03CC 0x0000 0x0 0x0
+#define MX6SLL_PAD_LCD_CLK__LCD_WR_RWN                            0x0104 0x03CC 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_CLK__PWM4_OUT                              0x0104 0x03CC 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_CLK__GPIO2_IO15                            0x0104 0x03CC 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE                         0x0108 0x03D0 0x0000 0x0 0x0
+#define MX6SLL_PAD_LCD_ENABLE__LCD_RD_E                           0x0108 0x03D0 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_ENABLE__UART2_DCE_RX                       0x0108 0x03D0 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_ENABLE__UART2_DTE_TX                       0x0108 0x03D0 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_ENABLE__GPIO2_IO16                         0x0108 0x03D0 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC                           0x010C 0x03D4 0x06D4 0x0 0x0
+#define MX6SLL_PAD_LCD_HSYNC__LCD_CS                              0x010C 0x03D4 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_HSYNC__UART2_DCE_TX                        0x010C 0x03D4 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_HSYNC__UART2_DTE_RX                        0x010C 0x03D4 0x074C 0x4 0x1
+#define MX6SLL_PAD_LCD_HSYNC__GPIO2_IO17                          0x010C 0x03D4 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_HSYNC__ARM_TRACE_CLK                       0x010C 0x03D4 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC                           0x0110 0x03D8 0x0000 0x0 0x0
+#define MX6SLL_PAD_LCD_VSYNC__LCD_RS                              0x0110 0x03D8 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_VSYNC__UART2_DCE_RTS                       0x0110 0x03D8 0x0748 0x4 0x0
+#define MX6SLL_PAD_LCD_VSYNC__UART2_DTE_CTS                       0x0110 0x03D8 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_VSYNC__GPIO2_IO18                          0x0110 0x03D8 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_VSYNC__ARM_TRACE_CTL                       0x0110 0x03D8 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_RESET__LCD_RESET                           0x0114 0x03DC 0x0000 0x0 0x0
+#define MX6SLL_PAD_LCD_RESET__LCD_BUSY                            0x0114 0x03DC 0x06D4 0x2 0x1
+#define MX6SLL_PAD_LCD_RESET__UART2_DCE_CTS                       0x0114 0x03DC 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_RESET__UART2_DTE_RTS                       0x0114 0x03DC 0x0748 0x4 0x1
+#define MX6SLL_PAD_LCD_RESET__GPIO2_IO19                          0x0114 0x03DC 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_RESET__CCM_PMIC_READY                      0x0114 0x03DC 0x05AC 0x6 0x2
+#define MX6SLL_PAD_LCD_DATA00__LCD_DATA00                         0x0118 0x03E0 0x06D8 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA00__ECSPI1_MOSI                        0x0118 0x03E0 0x0608 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA00__USB_OTG2_ID                        0x0118 0x03E0 0x0560 0x2 0x2
+#define MX6SLL_PAD_LCD_DATA00__PWM1_OUT                           0x0118 0x03E0 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA00__UART5_DTR_B                        0x0118 0x03E0 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA00__GPIO2_IO20                         0x0118 0x03E0 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA00__ARM_TRACE00                        0x0118 0x03E0 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA00__SRC_BOOT_CFG00                     0x0118 0x03E0 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA01__LCD_DATA01                         0x011C 0x03E4 0x06DC 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA01__ECSPI1_MISO                        0x011C 0x03E4 0x0604 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA01__USB_OTG1_ID                        0x011C 0x03E4 0x055C 0x2 0x3
+#define MX6SLL_PAD_LCD_DATA01__PWM2_OUT                           0x011C 0x03E4 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA01__AUD4_RXFS                          0x011C 0x03E4 0x0570 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA01__GPIO2_IO21                         0x011C 0x03E4 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA01__ARM_TRACE01                        0x011C 0x03E4 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA01__SRC_BOOT_CFG01                     0x011C 0x03E4 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA02__LCD_DATA02                         0x0120 0x03E8 0x06E0 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA02__ECSPI1_SS0                         0x0120 0x03E8 0x0614 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA02__EPIT2_OUT                          0x0120 0x03E8 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA02__PWM3_OUT                           0x0120 0x03E8 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA02__AUD4_RXC                           0x0120 0x03E8 0x056C 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA02__GPIO2_IO22                         0x0120 0x03E8 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA02__ARM_TRACE02                        0x0120 0x03E8 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA02__SRC_BOOT_CFG02                     0x0120 0x03E8 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA03__LCD_DATA03                         0x0124 0x03EC 0x06E4 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA03__ECSPI1_SCLK                        0x0124 0x03EC 0x05FC 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA03__UART5_DSR_B                        0x0124 0x03EC 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA03__PWM4_OUT                           0x0124 0x03EC 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA03__AUD4_RXD                           0x0124 0x03EC 0x0564 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA03__GPIO2_IO23                         0x0124 0x03EC 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA03__ARM_TRACE03                        0x0124 0x03EC 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA03__SRC_BOOT_CFG03                     0x0124 0x03EC 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA04__LCD_DATA04                         0x0128 0x03F0 0x06E8 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA04__ECSPI1_SS1                         0x0128 0x03F0 0x060C 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA04__CSI_VSYNC                          0x0128 0x03F0 0x05F8 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA04__WDOG2_RESET_B_DEB                  0x0128 0x03F0 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA04__AUD4_TXC                           0x0128 0x03F0 0x0574 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA04__GPIO2_IO24                         0x0128 0x03F0 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA04__ARM_TRACE04                        0x0128 0x03F0 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA04__SRC_BOOT_CFG04                     0x0128 0x03F0 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA05__LCD_DATA05                         0x012C 0x03F4 0x06EC 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA05__ECSPI1_SS2                         0x012C 0x03F4 0x0610 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA05__CSI_HSYNC                          0x012C 0x03F4 0x05F0 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA05__AUD4_TXFS                          0x012C 0x03F4 0x0578 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA05__GPIO2_IO25                         0x012C 0x03F4 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA05__ARM_TRACE05                        0x012C 0x03F4 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA05__SRC_BOOT_CFG05                     0x012C 0x03F4 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA06__LCD_DATA06                         0x0130 0x03F8 0x06F0 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA06__ECSPI1_SS3                         0x0130 0x03F8 0x0618 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA06__CSI_PIXCLK                         0x0130 0x03F8 0x05F4 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA06__AUD4_TXD                           0x0130 0x03F8 0x0568 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA06__GPIO2_IO26                         0x0130 0x03F8 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA06__ARM_TRACE06                        0x0130 0x03F8 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA06__SRC_BOOT_CFG06                     0x0130 0x03F8 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA07__LCD_DATA07                         0x0134 0x03FC 0x06F4 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA07__ECSPI1_RDY                         0x0134 0x03FC 0x0600 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA07__CSI_MCLK                           0x0134 0x03FC 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA07__AUDIO_CLK_OUT                      0x0134 0x03FC 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA07__GPIO2_IO27                         0x0134 0x03FC 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA07__ARM_TRACE07                        0x0134 0x03FC 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA07__SRC_BOOT_CFG07                     0x0134 0x03FC 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA08__LCD_DATA08                         0x0138 0x0400 0x06F8 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA08__KEY_COL0                           0x0138 0x0400 0x06A0 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA08__CSI_DATA09                         0x0138 0x0400 0x05EC 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA08__ECSPI2_SCLK                        0x0138 0x0400 0x061C 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA08__GPIO2_IO28                         0x0138 0x0400 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA08__ARM_TRACE08                        0x0138 0x0400 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA08__SRC_BOOT_CFG08                     0x0138 0x0400 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA09__LCD_DATA09                         0x013C 0x0404 0x06FC 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA09__KEY_ROW0                           0x013C 0x0404 0x06C0 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA09__CSI_DATA08                         0x013C 0x0404 0x05E8 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA09__ECSPI2_MOSI                        0x013C 0x0404 0x0624 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA09__GPIO2_IO29                         0x013C 0x0404 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA09__ARM_TRACE09                        0x013C 0x0404 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA09__SRC_BOOT_CFG09                     0x013C 0x0404 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA10__LCD_DATA10                         0x0140 0x0408 0x0700 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA10__KEY_COL1                           0x0140 0x0408 0x06A4 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA10__CSI_DATA07                         0x0140 0x0408 0x05E4 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA10__ECSPI2_MISO                        0x0140 0x0408 0x0620 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA10__GPIO2_IO30                         0x0140 0x0408 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA10__ARM_TRACE10                        0x0140 0x0408 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA10__SRC_BOOT_CFG10                     0x0140 0x0408 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA11__LCD_DATA11                         0x0144 0x040C 0x0704 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA11__KEY_ROW1                           0x0144 0x040C 0x06C4 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA11__CSI_DATA06                         0x0144 0x040C 0x05E0 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA11__ECSPI2_SS1                         0x0144 0x040C 0x062C 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA11__GPIO2_IO31                         0x0144 0x040C 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA11__ARM_TRACE11                        0x0144 0x040C 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA11__SRC_BOOT_CFG11                     0x0144 0x040C 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA12__LCD_DATA12                         0x0148 0x0410 0x0708 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA12__KEY_COL2                           0x0148 0x0410 0x06A8 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA12__CSI_DATA05                         0x0148 0x0410 0x05DC 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA12__UART5_DCE_RTS                      0x0148 0x0410 0x0760 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA12__UART5_DTE_CTS                      0x0148 0x0410 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA12__GPIO3_IO00                         0x0148 0x0410 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA12__ARM_TRACE12                        0x0148 0x0410 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA12__SRC_BOOT_CFG12                     0x0148 0x0410 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA13__LCD_DATA13                         0x014C 0x0414 0x070C 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA13__KEY_ROW2                           0x014C 0x0414 0x06C8 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA13__CSI_DATA04                         0x014C 0x0414 0x05D8 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA13__UART5_DCE_CTS                      0x014C 0x0414 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA13__UART5_DTE_RTS                      0x014C 0x0414 0x0760 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA13__GPIO3_IO01                         0x014C 0x0414 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA13__ARM_TRACE13                        0x014C 0x0414 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA13__SRC_BOOT_CFG13                     0x014C 0x0414 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA14__LCD_DATA14                         0x0150 0x0418 0x0710 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA14__KEY_COL3                           0x0150 0x0418 0x06AC 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA14__CSI_DATA03                         0x0150 0x0418 0x05D4 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA14__UART5_DCE_RX                       0x0150 0x0418 0x0764 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA14__UART5_DTE_TX                       0x0150 0x0418 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA14__GPIO3_IO02                         0x0150 0x0418 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA14__ARM_TRACE14                        0x0150 0x0418 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA14__SRC_BOOT_CFG14                     0x0150 0x0418 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA15__LCD_DATA15                         0x0154 0x041C 0x0714 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA15__KEY_ROW3                           0x0154 0x041C 0x06CC 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA15__CSI_DATA02                         0x0154 0x041C 0x05D0 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA15__UART5_DCE_TX                       0x0154 0x041C 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA15__UART5_DTE_RX                       0x0154 0x041C 0x0764 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA15__GPIO3_IO03                         0x0154 0x041C 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA15__ARM_TRACE15                        0x0154 0x041C 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA15__SRC_BOOT_CFG15                     0x0154 0x041C 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA16__LCD_DATA16                         0x0158 0x0420 0x0718 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA16__KEY_COL4                           0x0158 0x0420 0x06B0 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA16__CSI_DATA01                         0x0158 0x0420 0x05CC 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA16__I2C2_SCL                           0x0158 0x0420 0x0684 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA16__GPIO3_IO04                         0x0158 0x0420 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA16__SRC_BOOT_CFG24                     0x0158 0x0420 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA17__LCD_DATA17                         0x015C 0x0424 0x071C 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA17__KEY_ROW4                           0x015C 0x0424 0x06D0 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA17__CSI_DATA00                         0x015C 0x0424 0x05C8 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA17__I2C2_SDA                           0x015C 0x0424 0x0688 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA17__GPIO3_IO05                         0x015C 0x0424 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA17__SRC_BOOT_CFG25                     0x015C 0x0424 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA18__LCD_DATA18                         0x0160 0x0428 0x0720 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA18__KEY_COL5                           0x0160 0x0428 0x0694 0x1 0x2
+#define MX6SLL_PAD_LCD_DATA18__CSI_DATA15                         0x0160 0x0428 0x05C4 0x2 0x1
+#define MX6SLL_PAD_LCD_DATA18__GPT_CAPTURE1                       0x0160 0x0428 0x0670 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA18__GPIO3_IO06                         0x0160 0x0428 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA18__SRC_BOOT_CFG26                     0x0160 0x0428 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA19__LCD_DATA19                         0x0164 0x042C 0x0724 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA19__KEY_ROW5                           0x0164 0x042C 0x06B4 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA19__CSI_DATA14                         0x0164 0x042C 0x05C0 0x2 0x2
+#define MX6SLL_PAD_LCD_DATA19__GPT_CAPTURE2                       0x0164 0x042C 0x0674 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA19__GPIO3_IO07                         0x0164 0x042C 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA19__SRC_BOOT_CFG27                     0x0164 0x042C 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA20__LCD_DATA20                         0x0168 0x0430 0x0728 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA20__KEY_COL6                           0x0168 0x0430 0x0698 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA20__CSI_DATA13                         0x0168 0x0430 0x05BC 0x2 0x2
+#define MX6SLL_PAD_LCD_DATA20__GPT_COMPARE1                       0x0168 0x0430 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA20__GPIO3_IO08                         0x0168 0x0430 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA20__SRC_BOOT_CFG28                     0x0168 0x0430 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA21__LCD_DATA21                         0x016C 0x0434 0x072C 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA21__KEY_ROW6                           0x016C 0x0434 0x06B8 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA21__CSI_DATA12                         0x016C 0x0434 0x05B8 0x2 0x2
+#define MX6SLL_PAD_LCD_DATA21__GPT_COMPARE2                       0x016C 0x0434 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA21__GPIO3_IO09                         0x016C 0x0434 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA21__SRC_BOOT_CFG29                     0x016C 0x0434 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA22__LCD_DATA22                         0x0170 0x0438 0x0730 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA22__KEY_COL7                           0x0170 0x0438 0x069C 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA22__CSI_DATA11                         0x0170 0x0438 0x05B4 0x2 0x1
+#define MX6SLL_PAD_LCD_DATA22__GPT_COMPARE3                       0x0170 0x0438 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA22__GPIO3_IO10                         0x0170 0x0438 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA22__SRC_BOOT_CFG30                     0x0170 0x0438 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA23__LCD_DATA23                         0x0174 0x043C 0x0734 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA23__KEY_ROW7                           0x0174 0x043C 0x06BC 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA23__CSI_DATA10                         0x0174 0x043C 0x05B0 0x2 0x1
+#define MX6SLL_PAD_LCD_DATA23__GPT_CLKIN                          0x0174 0x043C 0x0678 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA23__GPIO3_IO11                         0x0174 0x043C 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA23__SRC_BOOT_CFG31                     0x0174 0x043C 0x0000 0x7 0x0
+#define MX6SLL_PAD_AUD_RXFS__AUD3_RXFS                            0x0178 0x0440 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_RXFS__I2C1_SCL                             0x0178 0x0440 0x067C 0x1 0x1
+#define MX6SLL_PAD_AUD_RXFS__UART3_DCE_RX                         0x0178 0x0440 0x0754 0x2 0x0
+#define MX6SLL_PAD_AUD_RXFS__UART3_DTE_TX                         0x0178 0x0440 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_RXFS__I2C3_SCL                             0x0178 0x0440 0x068C 0x4 0x1
+#define MX6SLL_PAD_AUD_RXFS__GPIO1_IO00                           0x0178 0x0440 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_RXFS__ECSPI3_SS0                           0x0178 0x0440 0x0648 0x6 0x0
+#define MX6SLL_PAD_AUD_RXFS__MBIST_BEND                           0x0178 0x0440 0x0000 0x7 0x0
+#define MX6SLL_PAD_AUD_RXC__AUD3_RXC                              0x017C 0x0444 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_RXC__I2C1_SDA                              0x017C 0x0444 0x0680 0x1 0x1
+#define MX6SLL_PAD_AUD_RXC__UART3_DCE_TX                          0x017C 0x0444 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_RXC__UART3_DTE_RX                          0x017C 0x0444 0x0754 0x2 0x1
+#define MX6SLL_PAD_AUD_RXC__I2C3_SDA                              0x017C 0x0444 0x0690 0x4 0x1
+#define MX6SLL_PAD_AUD_RXC__GPIO1_IO01                            0x017C 0x0444 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_RXC__ECSPI3_SS1                            0x017C 0x0444 0x064C 0x6 0x0
+#define MX6SLL_PAD_AUD_RXD__AUD3_RXD                              0x0180 0x0448 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_RXD__ECSPI3_MOSI                           0x0180 0x0448 0x063C 0x1 0x0
+#define MX6SLL_PAD_AUD_RXD__UART4_DCE_RX                          0x0180 0x0448 0x075C 0x2 0x0
+#define MX6SLL_PAD_AUD_RXD__UART4_DTE_TX                          0x0180 0x0448 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_RXD__SD1_LCTL                              0x0180 0x0448 0x0000 0x4 0x0
+#define MX6SLL_PAD_AUD_RXD__GPIO1_IO02                            0x0180 0x0448 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_TXC__AUD3_TXC                              0x0184 0x044C 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_TXC__ECSPI3_MISO                           0x0184 0x044C 0x0638 0x1 0x0
+#define MX6SLL_PAD_AUD_TXC__UART4_DCE_TX                          0x0184 0x044C 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_TXC__UART4_DTE_RX                          0x0184 0x044C 0x075C 0x2 0x1
+#define MX6SLL_PAD_AUD_TXC__SD2_LCTL                              0x0184 0x044C 0x0000 0x4 0x0
+#define MX6SLL_PAD_AUD_TXC__GPIO1_IO03                            0x0184 0x044C 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_TXFS__AUD3_TXFS                            0x0188 0x0450 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_TXFS__PWM3_OUT                             0x0188 0x0450 0x0000 0x1 0x0
+#define MX6SLL_PAD_AUD_TXFS__UART4_DCE_RTS                        0x0188 0x0450 0x0758 0x2 0x0
+#define MX6SLL_PAD_AUD_TXFS__UART4_DTE_CTS                        0x0188 0x0450 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_TXFS__SD3_LCTL                             0x0188 0x0450 0x0000 0x4 0x0
+#define MX6SLL_PAD_AUD_TXFS__GPIO1_IO04                           0x0188 0x0450 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_TXD__AUD3_TXD                              0x018C 0x0454 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_TXD__ECSPI3_SCLK                           0x018C 0x0454 0x0630 0x1 0x0
+#define MX6SLL_PAD_AUD_TXD__UART4_DCE_CTS                         0x018C 0x0454 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_TXD__UART4_DTE_RTS                         0x018C 0x0454 0x0758 0x2 0x1
+#define MX6SLL_PAD_AUD_TXD__GPIO1_IO05                            0x018C 0x0454 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_MCLK__AUDIO_CLK_OUT                        0x0190 0x0458 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_MCLK__PWM4_OUT                             0x0190 0x0458 0x0000 0x1 0x0
+#define MX6SLL_PAD_AUD_MCLK__ECSPI3_RDY                           0x0190 0x0458 0x0634 0x2 0x0
+#define MX6SLL_PAD_AUD_MCLK__WDOG2_RESET_B_DEB                    0x0190 0x0458 0x0000 0x4 0x0
+#define MX6SLL_PAD_AUD_MCLK__GPIO1_IO06                           0x0190 0x0458 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_MCLK__SPDIF_EXT_CLK                        0x0190 0x0458 0x073C 0x6 0x1
+#define MX6SLL_PAD_UART1_RXD__UART1_DCE_RX                        0x0194 0x045C 0x0744 0x0 0x0
+#define MX6SLL_PAD_UART1_RXD__UART1_DTE_TX                        0x0194 0x045C 0x0000 0x0 0x0
+#define MX6SLL_PAD_UART1_RXD__PWM1_OUT                            0x0194 0x045C 0x0000 0x1 0x0
+#define MX6SLL_PAD_UART1_RXD__UART4_DCE_RX                        0x0194 0x045C 0x075C 0x2 0x4
+#define MX6SLL_PAD_UART1_RXD__UART4_DTE_TX                        0x0194 0x045C 0x0000 0x2 0x0
+#define MX6SLL_PAD_UART1_RXD__UART5_DCE_RX                        0x0194 0x045C 0x0764 0x4 0x6
+#define MX6SLL_PAD_UART1_RXD__UART5_DTE_TX                        0x0194 0x045C 0x0000 0x4 0x0
+#define MX6SLL_PAD_UART1_RXD__GPIO3_IO16                          0x0194 0x045C 0x0000 0x5 0x0
+#define MX6SLL_PAD_UART1_TXD__UART1_DCE_TX                        0x0198 0x0460 0x0000 0x0 0x0
+#define MX6SLL_PAD_UART1_TXD__UART1_DTE_RX                        0x0198 0x0460 0x0744 0x0 0x1
+#define MX6SLL_PAD_UART1_TXD__PWM2_OUT                            0x0198 0x0460 0x0000 0x1 0x0
+#define MX6SLL_PAD_UART1_TXD__UART4_DCE_TX                        0x0198 0x0460 0x0000 0x2 0x0
+#define MX6SLL_PAD_UART1_TXD__UART4_DTE_RX                        0x0198 0x0460 0x075C 0x2 0x5
+#define MX6SLL_PAD_UART1_TXD__UART5_DCE_TX                        0x0198 0x0460 0x0000 0x4 0x0
+#define MX6SLL_PAD_UART1_TXD__UART5_DTE_RX                        0x0198 0x0460 0x0764 0x4 0x7
+#define MX6SLL_PAD_UART1_TXD__GPIO3_IO17                          0x0198 0x0460 0x0000 0x5 0x0
+#define MX6SLL_PAD_UART1_TXD__UART5_DCD_B                         0x0198 0x0460 0x0000 0x7 0x0
+#define MX6SLL_PAD_I2C1_SCL__I2C1_SCL                             0x019C 0x0464 0x067C 0x0 0x0
+#define MX6SLL_PAD_I2C1_SCL__UART1_DCE_RTS                        0x019C 0x0464 0x0740 0x1 0x0
+#define MX6SLL_PAD_I2C1_SCL__UART1_DTE_CTS                        0x019C 0x0464 0x0000 0x1 0x0
+#define MX6SLL_PAD_I2C1_SCL__ECSPI3_SS2                           0x019C 0x0464 0x0640 0x2 0x0
+#define MX6SLL_PAD_I2C1_SCL__SD3_RESET                            0x019C 0x0464 0x0000 0x4 0x0
+#define MX6SLL_PAD_I2C1_SCL__GPIO3_IO12                           0x019C 0x0464 0x0000 0x5 0x0
+#define MX6SLL_PAD_I2C1_SCL__ECSPI1_SS1                           0x019C 0x0464 0x060C 0x6 0x0
+#define MX6SLL_PAD_I2C1_SDA__I2C1_SDA                             0x01A0 0x0468 0x0680 0x0 0x0
+#define MX6SLL_PAD_I2C1_SDA__UART1_DCE_CTS                        0x01A0 0x0468 0x0000 0x1 0x0
+#define MX6SLL_PAD_I2C1_SDA__UART1_DTE_RTS                        0x01A0 0x0468 0x0740 0x1 0x1
+#define MX6SLL_PAD_I2C1_SDA__ECSPI3_SS3                           0x01A0 0x0468 0x0644 0x2 0x0
+#define MX6SLL_PAD_I2C1_SDA__SD3_VSELECT                          0x01A0 0x0468 0x0000 0x4 0x0
+#define MX6SLL_PAD_I2C1_SDA__GPIO3_IO13                           0x01A0 0x0468 0x0000 0x5 0x0
+#define MX6SLL_PAD_I2C1_SDA__ECSPI1_SS2                           0x01A0 0x0468 0x0610 0x6 0x0
+#define MX6SLL_PAD_I2C2_SCL__I2C2_SCL                             0x01A4 0x046C 0x0684 0x0 0x3
+#define MX6SLL_PAD_I2C2_SCL__AUD4_RXFS                            0x01A4 0x046C 0x0570 0x1 0x2
+#define MX6SLL_PAD_I2C2_SCL__SPDIF_IN                             0x01A4 0x046C 0x0738 0x2 0x2
+#define MX6SLL_PAD_I2C2_SCL__SD3_WP                               0x01A4 0x046C 0x0794 0x4 0x3
+#define MX6SLL_PAD_I2C2_SCL__GPIO3_IO14                           0x01A4 0x046C 0x0000 0x5 0x0
+#define MX6SLL_PAD_I2C2_SCL__ECSPI1_RDY                           0x01A4 0x046C 0x0600 0x6 0x1
+#define MX6SLL_PAD_I2C2_SDA__I2C2_SDA                             0x01A8 0x0470 0x0688 0x0 0x3
+#define MX6SLL_PAD_I2C2_SDA__AUD4_RXC                             0x01A8 0x0470 0x056C 0x1 0x2
+#define MX6SLL_PAD_I2C2_SDA__SPDIF_OUT                            0x01A8 0x0470 0x0000 0x2 0x0
+#define MX6SLL_PAD_I2C2_SDA__SD3_CD_B                             0x01A8 0x0470 0x0780 0x4 0x3
+#define MX6SLL_PAD_I2C2_SDA__GPIO3_IO15                           0x01A8 0x0470 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__ECSPI1_SCLK                       0x01AC 0x0474 0x05FC 0x0 0x1
+#define MX6SLL_PAD_ECSPI1_SCLK__AUD4_TXD                          0x01AC 0x0474 0x0568 0x1 0x1
+#define MX6SLL_PAD_ECSPI1_SCLK__UART5_DCE_RX                      0x01AC 0x0474 0x0764 0x2 0x2
+#define MX6SLL_PAD_ECSPI1_SCLK__UART5_DTE_TX                      0x01AC 0x0474 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__EPDC_VCOM0                        0x01AC 0x0474 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__SD2_RESET                         0x01AC 0x0474 0x0000 0x4 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__GPIO4_IO08                        0x01AC 0x0474 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__USB_OTG2_OC                       0x01AC 0x0474 0x0768 0x6 0x1
+#define MX6SLL_PAD_ECSPI1_MOSI__ECSPI1_MOSI                       0x01B0 0x0478 0x0608 0x0 0x1
+#define MX6SLL_PAD_ECSPI1_MOSI__AUD4_TXC                          0x01B0 0x0478 0x0574 0x1 0x1
+#define MX6SLL_PAD_ECSPI1_MOSI__UART5_DCE_TX                      0x01B0 0x0478 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI1_MOSI__UART5_DTE_RX                      0x01B0 0x0478 0x0764 0x2 0x3
+#define MX6SLL_PAD_ECSPI1_MOSI__EPDC_VCOM1                        0x01B0 0x0478 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI1_MOSI__SD2_VSELECT                       0x01B0 0x0478 0x0000 0x4 0x0
+#define MX6SLL_PAD_ECSPI1_MOSI__GPIO4_IO09                        0x01B0 0x0478 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_MISO__ECSPI1_MISO                       0x01B4 0x047C 0x0604 0x0 0x1
+#define MX6SLL_PAD_ECSPI1_MISO__AUD4_TXFS                         0x01B4 0x047C 0x0578 0x1 0x1
+#define MX6SLL_PAD_ECSPI1_MISO__UART5_DCE_RTS                     0x01B4 0x047C 0x0760 0x2 0x2
+#define MX6SLL_PAD_ECSPI1_MISO__UART5_DTE_CTS                     0x01B4 0x047C 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI1_MISO__EPDC_BDR0                         0x01B4 0x047C 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI1_MISO__SD2_WP                            0x01B4 0x047C 0x077C 0x4 0x0
+#define MX6SLL_PAD_ECSPI1_MISO__GPIO4_IO10                        0x01B4 0x047C 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__ECSPI1_SS0                         0x01B8 0x0480 0x0614 0x0 0x1
+#define MX6SLL_PAD_ECSPI1_SS0__AUD4_RXD                           0x01B8 0x0480 0x0564 0x1 0x1
+#define MX6SLL_PAD_ECSPI1_SS0__UART5_DCE_CTS                      0x01B8 0x0480 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__UART5_DTE_RTS                      0x01B8 0x0480 0x0760 0x2 0x3
+#define MX6SLL_PAD_ECSPI1_SS0__EPDC_BDR1                          0x01B8 0x0480 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__SD2_CD_B                           0x01B8 0x0480 0x0778 0x4 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__GPIO4_IO11                         0x01B8 0x0480 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__USB_OTG2_PWR                       0x01B8 0x0480 0x0000 0x6 0x0
+#define MX6SLL_PAD_ECSPI2_SCLK__ECSPI2_SCLK                       0x01BC 0x0484 0x061C 0x0 0x1
+#define MX6SLL_PAD_ECSPI2_SCLK__SPDIF_EXT_CLK                     0x01BC 0x0484 0x073C 0x1 0x2
+#define MX6SLL_PAD_ECSPI2_SCLK__UART3_DCE_RX                      0x01BC 0x0484 0x0754 0x2 0x2
+#define MX6SLL_PAD_ECSPI2_SCLK__UART3_DTE_TX                      0x01BC 0x0484 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_SCLK__CSI_PIXCLK                        0x01BC 0x0484 0x05F4 0x3 0x1
+#define MX6SLL_PAD_ECSPI2_SCLK__SD1_RESET                         0x01BC 0x0484 0x0000 0x4 0x0
+#define MX6SLL_PAD_ECSPI2_SCLK__GPIO4_IO12                        0x01BC 0x0484 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI2_SCLK__USB_OTG2_OC                       0x01BC 0x0484 0x0768 0x6 0x2
+#define MX6SLL_PAD_ECSPI2_MOSI__ECSPI2_MOSI                       0x01C0 0x0488 0x0624 0x0 0x1
+#define MX6SLL_PAD_ECSPI2_MOSI__SDMA_EXT_EVENT1                   0x01C0 0x0488 0x0000 0x1 0x0
+#define MX6SLL_PAD_ECSPI2_MOSI__UART3_DCE_TX                      0x01C0 0x0488 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_MOSI__UART3_DTE_RX                      0x01C0 0x0488 0x0754 0x2 0x3
+#define MX6SLL_PAD_ECSPI2_MOSI__CSI_HSYNC                         0x01C0 0x0488 0x05F0 0x3 0x1
+#define MX6SLL_PAD_ECSPI2_MOSI__SD1_VSELECT                       0x01C0 0x0488 0x0000 0x4 0x0
+#define MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13                        0x01C0 0x0488 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__ECSPI2_MISO                       0x01C4 0x048C 0x0620 0x0 0x1
+#define MX6SLL_PAD_ECSPI2_MISO__SDMA_EXT_EVENT0                   0x01C4 0x048C 0x0000 0x1 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__UART3_DCE_RTS                     0x01C4 0x048C 0x0750 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__UART3_DTE_CTS                     0x01C4 0x048C 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__CSI_MCLK                          0x01C4 0x048C 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__SD1_WP                            0x01C4 0x048C 0x0774 0x4 0x2
+#define MX6SLL_PAD_ECSPI2_MISO__GPIO4_IO14                        0x01C4 0x048C 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__USB_OTG1_OC                       0x01C4 0x048C 0x076C 0x6 0x1
+#define MX6SLL_PAD_ECSPI2_SS0__ECSPI2_SS0                         0x01C8 0x0490 0x0628 0x0 0x0
+#define MX6SLL_PAD_ECSPI2_SS0__ECSPI1_SS3                         0x01C8 0x0490 0x0618 0x1 0x1
+#define MX6SLL_PAD_ECSPI2_SS0__UART3_DCE_CTS                      0x01C8 0x0490 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_SS0__UART3_DTE_RTS                      0x01C8 0x0490 0x0750 0x2 0x1
+#define MX6SLL_PAD_ECSPI2_SS0__CSI_VSYNC                          0x01C8 0x0490 0x05F8 0x3 0x1
+#define MX6SLL_PAD_ECSPI2_SS0__SD1_CD_B                           0x01C8 0x0490 0x0770 0x4 0x2
+#define MX6SLL_PAD_ECSPI2_SS0__GPIO4_IO15                         0x01C8 0x0490 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI2_SS0__USB_OTG1_PWR                       0x01C8 0x0490 0x0000 0x6 0x0
+#define MX6SLL_PAD_SD1_CLK__SD1_CLK                               0x01CC 0x0494 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_CLK__KEY_COL0                              0x01CC 0x0494 0x06A0 0x2 0x2
+#define MX6SLL_PAD_SD1_CLK__EPDC_SDCE4                            0x01CC 0x0494 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_CLK__GPIO5_IO15                            0x01CC 0x0494 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_CMD__SD1_CMD                               0x01D0 0x0498 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_CMD__KEY_ROW0                              0x01D0 0x0498 0x06C0 0x2 0x2
+#define MX6SLL_PAD_SD1_CMD__EPDC_SDCE5                            0x01D0 0x0498 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_CMD__GPIO5_IO14                            0x01D0 0x0498 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA0__SD1_DATA0                           0x01D4 0x049C 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA0__KEY_COL1                            0x01D4 0x049C 0x06A4 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA0__EPDC_SDCE6                          0x01D4 0x049C 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA0__GPIO5_IO11                          0x01D4 0x049C 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA1__SD1_DATA1                           0x01D8 0x04A0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA1__KEY_ROW1                            0x01D8 0x04A0 0x06C4 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA1__EPDC_SDCE7                          0x01D8 0x04A0 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA1__GPIO5_IO08                          0x01D8 0x04A0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA2__SD1_DATA2                           0x01DC 0x04A4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA2__KEY_COL2                            0x01DC 0x04A4 0x06A8 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA2__EPDC_SDCE8                          0x01DC 0x04A4 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA2__GPIO5_IO13                          0x01DC 0x04A4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA3__SD1_DATA3                           0x01E0 0x04A8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA3__KEY_ROW2                            0x01E0 0x04A8 0x06C8 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA3__EPDC_SDCE9                          0x01E0 0x04A8 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA3__GPIO5_IO06                          0x01E0 0x04A8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA4__SD1_DATA4                           0x01E4 0x04AC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA4__KEY_COL3                            0x01E4 0x04AC 0x06AC 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA4__EPDC_SDCLK_N                        0x01E4 0x04AC 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA4__UART4_DCE_RX                        0x01E4 0x04AC 0x075C 0x4 0x6
+#define MX6SLL_PAD_SD1_DATA4__UART4_DTE_TX                        0x01E4 0x04AC 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD1_DATA4__GPIO5_IO12                          0x01E4 0x04AC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA5__SD1_DATA5                           0x01E8 0x04B0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA5__KEY_ROW3                            0x01E8 0x04B0 0x06CC 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA5__EPDC_SDOED                          0x01E8 0x04B0 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA5__UART4_DCE_TX                        0x01E8 0x04B0 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD1_DATA5__UART4_DTE_RX                        0x01E8 0x04B0 0x075C 0x4 0x7
+#define MX6SLL_PAD_SD1_DATA5__GPIO5_IO09                          0x01E8 0x04B0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA6__SD1_DATA6                           0x01EC 0x04B4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA6__KEY_COL4                            0x01EC 0x04B4 0x06B0 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA6__EPDC_SDOEZ                          0x01EC 0x04B4 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA6__UART4_DCE_RTS                       0x01EC 0x04B4 0x0758 0x4 0x4
+#define MX6SLL_PAD_SD1_DATA6__UART4_DTE_CTS                       0x01EC 0x04B4 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD1_DATA6__GPIO5_IO07                          0x01EC 0x04B4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA7__SD1_DATA7                           0x01F0 0x04B8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA7__KEY_ROW4                            0x01F0 0x04B8 0x06D0 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA7__CCM_PMIC_READY                      0x01F0 0x04B8 0x05AC 0x3 0x3
+#define MX6SLL_PAD_SD1_DATA7__UART4_DCE_CTS                       0x01F0 0x04B8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD1_DATA7__UART4_DTE_RTS                       0x01F0 0x04B8 0x0758 0x4 0x5
+#define MX6SLL_PAD_SD1_DATA7__GPIO5_IO10                          0x01F0 0x04B8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_RESET__SD2_RESET                           0x01F4 0x04BC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_RESET__WDOG2_B                             0x01F4 0x04BC 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_RESET__SPDIF_OUT                           0x01F4 0x04BC 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD2_RESET__CSI_MCLK                            0x01F4 0x04BC 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_RESET__GPIO4_IO27                          0x01F4 0x04BC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_CLK__SD2_CLK                               0x01F8 0x04C0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_CLK__AUD4_RXFS                             0x01F8 0x04C0 0x0570 0x1 0x1
+#define MX6SLL_PAD_SD2_CLK__ECSPI3_SCLK                           0x01F8 0x04C0 0x0630 0x2 0x1
+#define MX6SLL_PAD_SD2_CLK__CSI_DATA00                            0x01F8 0x04C0 0x05C8 0x3 0x1
+#define MX6SLL_PAD_SD2_CLK__GPIO5_IO05                            0x01F8 0x04C0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_CMD__SD2_CMD                               0x01FC 0x04C4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_CMD__AUD4_RXC                              0x01FC 0x04C4 0x056C 0x1 0x1
+#define MX6SLL_PAD_SD2_CMD__ECSPI3_SS0                            0x01FC 0x04C4 0x0648 0x2 0x1
+#define MX6SLL_PAD_SD2_CMD__CSI_DATA01                            0x01FC 0x04C4 0x05CC 0x3 0x1
+#define MX6SLL_PAD_SD2_CMD__EPIT1_OUT                             0x01FC 0x04C4 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_CMD__GPIO5_IO04                            0x01FC 0x04C4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA0__SD2_DATA0                           0x0200 0x04C8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA0__AUD4_RXD                            0x0200 0x04C8 0x0564 0x1 0x2
+#define MX6SLL_PAD_SD2_DATA0__ECSPI3_MOSI                         0x0200 0x04C8 0x063C 0x2 0x1
+#define MX6SLL_PAD_SD2_DATA0__CSI_DATA02                          0x0200 0x04C8 0x05D0 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA0__UART5_DCE_RTS                       0x0200 0x04C8 0x0760 0x4 0x4
+#define MX6SLL_PAD_SD2_DATA0__UART5_DTE_CTS                       0x0200 0x04C8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA0__GPIO5_IO01                          0x0200 0x04C8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA1__SD2_DATA1                           0x0204 0x04CC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA1__AUD4_TXC                            0x0204 0x04CC 0x0574 0x1 0x2
+#define MX6SLL_PAD_SD2_DATA1__ECSPI3_MISO                         0x0204 0x04CC 0x0638 0x2 0x1
+#define MX6SLL_PAD_SD2_DATA1__CSI_DATA03                          0x0204 0x04CC 0x05D4 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA1__UART5_DCE_CTS                       0x0204 0x04CC 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA1__UART5_DTE_RTS                       0x0204 0x04CC 0x0760 0x4 0x5
+#define MX6SLL_PAD_SD2_DATA1__GPIO4_IO30                          0x0204 0x04CC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA2__SD2_DATA2                           0x0208 0x04D0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA2__AUD4_TXFS                           0x0208 0x04D0 0x0578 0x1 0x2
+#define MX6SLL_PAD_SD2_DATA2__CSI_DATA04                          0x0208 0x04D0 0x05D8 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA2__UART5_DCE_RX                        0x0208 0x04D0 0x0764 0x4 0x4
+#define MX6SLL_PAD_SD2_DATA2__UART5_DTE_TX                        0x0208 0x04D0 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA2__GPIO5_IO03                          0x0208 0x04D0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA3__SD2_DATA3                           0x020C 0x04D4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA3__AUD4_TXD                            0x020C 0x04D4 0x0568 0x1 0x2
+#define MX6SLL_PAD_SD2_DATA3__CSI_DATA05                          0x020C 0x04D4 0x05DC 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA3__UART5_DCE_TX                        0x020C 0x04D4 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA3__UART5_DTE_RX                        0x020C 0x04D4 0x0764 0x4 0x5
+#define MX6SLL_PAD_SD2_DATA3__GPIO4_IO28                          0x020C 0x04D4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA4__SD2_DATA4                           0x0210 0x04D8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA4__SD3_DATA4                           0x0210 0x04D8 0x0784 0x1 0x1
+#define MX6SLL_PAD_SD2_DATA4__UART2_DCE_RX                        0x0210 0x04D8 0x074C 0x2 0x2
+#define MX6SLL_PAD_SD2_DATA4__UART2_DTE_TX                        0x0210 0x04D8 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_DATA4__CSI_DATA06                          0x0210 0x04D8 0x05E0 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA4__SPDIF_OUT                           0x0210 0x04D8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA4__GPIO5_IO02                          0x0210 0x04D8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA5__SD2_DATA5                           0x0214 0x04DC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA5__SD3_DATA5                           0x0214 0x04DC 0x0788 0x1 0x1
+#define MX6SLL_PAD_SD2_DATA5__UART2_DCE_TX                        0x0214 0x04DC 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_DATA5__UART2_DTE_RX                        0x0214 0x04DC 0x074C 0x2 0x3
+#define MX6SLL_PAD_SD2_DATA5__CSI_DATA07                          0x0214 0x04DC 0x05E4 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA5__SPDIF_IN                            0x0214 0x04DC 0x0738 0x4 0x1
+#define MX6SLL_PAD_SD2_DATA5__GPIO4_IO31                          0x0214 0x04DC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA6__SD2_DATA6                           0x0218 0x04E0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA6__SD3_DATA6                           0x0218 0x04E0 0x078C 0x1 0x1
+#define MX6SLL_PAD_SD2_DATA6__UART2_DCE_RTS                       0x0218 0x04E0 0x0748 0x2 0x2
+#define MX6SLL_PAD_SD2_DATA6__UART2_DTE_CTS                       0x0218 0x04E0 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_DATA6__CSI_DATA08                          0x0218 0x04E0 0x05E8 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA6__SD2_WP                              0x0218 0x04E0 0x077C 0x4 0x1
+#define MX6SLL_PAD_SD2_DATA6__GPIO4_IO29                          0x0218 0x04E0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA7__SD2_DATA7                           0x021C 0x04E4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA7__SD3_DATA7                           0x021C 0x04E4 0x0790 0x1 0x1
+#define MX6SLL_PAD_SD2_DATA7__UART2_DCE_CTS                       0x021C 0x04E4 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_DATA7__UART2_DTE_RTS                       0x021C 0x04E4 0x0748 0x2 0x3
+#define MX6SLL_PAD_SD2_DATA7__CSI_DATA09                          0x021C 0x04E4 0x05EC 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA7__SD2_CD_B                            0x021C 0x04E4 0x0778 0x4 0x1
+#define MX6SLL_PAD_SD2_DATA7__GPIO5_IO00                          0x021C 0x04E4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_CLK__SD3_CLK                               0x0220 0x04E8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_CLK__AUD5_RXFS                             0x0220 0x04E8 0x0588 0x1 0x0
+#define MX6SLL_PAD_SD3_CLK__KEY_COL5                              0x0220 0x04E8 0x0694 0x2 0x0
+#define MX6SLL_PAD_SD3_CLK__CSI_DATA10                            0x0220 0x04E8 0x05B0 0x3 0x0
+#define MX6SLL_PAD_SD3_CLK__WDOG1_RESET_B_DEB                     0x0220 0x04E8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD3_CLK__GPIO5_IO18                            0x0220 0x04E8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_CLK__USB_OTG1_PWR                          0x0220 0x04E8 0x0000 0x6 0x0
+#define MX6SLL_PAD_SD3_CMD__SD3_CMD                               0x0224 0x04EC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_CMD__AUD5_RXC                              0x0224 0x04EC 0x0584 0x1 0x0
+#define MX6SLL_PAD_SD3_CMD__KEY_ROW5                              0x0224 0x04EC 0x06B4 0x2 0x0
+#define MX6SLL_PAD_SD3_CMD__CSI_DATA11                            0x0224 0x04EC 0x05B4 0x3 0x0
+#define MX6SLL_PAD_SD3_CMD__USB_OTG2_ID                           0x0224 0x04EC 0x0560 0x4 0x1
+#define MX6SLL_PAD_SD3_CMD__GPIO5_IO21                            0x0224 0x04EC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_CMD__USB_OTG2_PWR                          0x0224 0x04EC 0x0000 0x6 0x0
+#define MX6SLL_PAD_SD3_DATA0__SD3_DATA0                           0x0228 0x04F0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_DATA0__AUD5_RXD                            0x0228 0x04F0 0x057C 0x1 0x0
+#define MX6SLL_PAD_SD3_DATA0__KEY_COL6                            0x0228 0x04F0 0x0698 0x2 0x0
+#define MX6SLL_PAD_SD3_DATA0__CSI_DATA12                          0x0228 0x04F0 0x05B8 0x3 0x0
+#define MX6SLL_PAD_SD3_DATA0__USB_OTG1_ID                         0x0228 0x04F0 0x055C 0x4 0x1
+#define MX6SLL_PAD_SD3_DATA0__GPIO5_IO19                          0x0228 0x04F0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_DATA1__SD3_DATA1                           0x022C 0x04F4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_DATA1__AUD5_TXC                            0x022C 0x04F4 0x058C 0x1 0x0
+#define MX6SLL_PAD_SD3_DATA1__KEY_ROW6                            0x022C 0x04F4 0x06B8 0x2 0x0
+#define MX6SLL_PAD_SD3_DATA1__CSI_DATA13                          0x022C 0x04F4 0x05BC 0x3 0x0
+#define MX6SLL_PAD_SD3_DATA1__SD1_VSELECT                         0x022C 0x04F4 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD3_DATA1__GPIO5_IO20                          0x022C 0x04F4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_DATA1__JTAG_DE_B                           0x022C 0x04F4 0x0000 0x6 0x0
+#define MX6SLL_PAD_SD3_DATA2__SD3_DATA2                           0x0230 0x04F8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_DATA2__AUD5_TXFS                           0x0230 0x04F8 0x0590 0x1 0x0
+#define MX6SLL_PAD_SD3_DATA2__KEY_COL7                            0x0230 0x04F8 0x069C 0x2 0x0
+#define MX6SLL_PAD_SD3_DATA2__CSI_DATA14                          0x0230 0x04F8 0x05C0 0x3 0x0
+#define MX6SLL_PAD_SD3_DATA2__EPIT1_OUT                           0x0230 0x04F8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD3_DATA2__GPIO5_IO16                          0x0230 0x04F8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_DATA2__USB_OTG2_OC                         0x0230 0x04F8 0x0768 0x6 0x0
+#define MX6SLL_PAD_SD3_DATA3__SD3_DATA3                           0x0234 0x04FC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_DATA3__AUD5_TXD                            0x0234 0x04FC 0x0580 0x1 0x0
+#define MX6SLL_PAD_SD3_DATA3__KEY_ROW7                            0x0234 0x04FC 0x06BC 0x2 0x0
+#define MX6SLL_PAD_SD3_DATA3__CSI_DATA15                          0x0234 0x04FC 0x05C4 0x3 0x0
+#define MX6SLL_PAD_SD3_DATA3__EPIT2_OUT                           0x0234 0x04FC 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD3_DATA3__GPIO5_IO17                          0x0234 0x04FC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_DATA3__USB_OTG1_OC                         0x0234 0x04FC 0x076C 0x6 0x0
+#define MX6SLL_PAD_GPIO4_IO20__SD1_STROBE                         0x0238 0x0500 0x0000 0x0 0x0
+#define MX6SLL_PAD_GPIO4_IO20__AUD6_RXFS                          0x0238 0x0500 0x05A0 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO20__ECSPI4_SS0                         0x0238 0x0500 0x065C 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO20__GPT_CAPTURE1                       0x0238 0x0500 0x0670 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO20__GPIO4_IO20                         0x0238 0x0500 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO21__SD2_STROBE                         0x023C 0x0504 0x0000 0x0 0x0
+#define MX6SLL_PAD_GPIO4_IO21__AUD6_RXC                           0x023C 0x0504 0x059C 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO21__ECSPI4_SCLK                        0x023C 0x0504 0x0650 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO21__GPT_CAPTURE2                       0x023C 0x0504 0x0674 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO21__GPIO4_IO21                         0x023C 0x0504 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO19__SD3_STROBE                         0x0240 0x0508 0x0000 0x0 0x0
+#define MX6SLL_PAD_GPIO4_IO19__AUD6_RXD                           0x0240 0x0508 0x0594 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO19__ECSPI4_MOSI                        0x0240 0x0508 0x0658 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO19__GPT_COMPARE1                       0x0240 0x0508 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO19__GPIO4_IO19                         0x0240 0x0508 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO25__AUD6_TXC                           0x0244 0x050C 0x05A4 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO25__ECSPI4_MISO                        0x0244 0x050C 0x0654 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO25__GPT_COMPARE2                       0x0244 0x050C 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO25__GPIO4_IO25                         0x0244 0x050C 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO18__AUD6_TXFS                          0x0248 0x0510 0x05A8 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO18__ECSPI4_SS1                         0x0248 0x0510 0x0660 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO18__GPT_COMPARE3                       0x0248 0x0510 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO18__GPIO4_IO18                         0x0248 0x0510 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO24__AUD6_TXD                           0x024C 0x0514 0x0598 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO24__ECSPI4_SS2                         0x024C 0x0514 0x0664 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO24__GPT_CLKIN                          0x024C 0x0514 0x0678 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24                         0x024C 0x0514 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO23__AUDIO_CLK_OUT                      0x0250 0x0518 0x0000 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO23__SD1_RESET                          0x0250 0x0518 0x0000 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO23__SD3_RESET                          0x0250 0x0518 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO23__GPIO4_IO23                         0x0250 0x0518 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO17__USB_OTG1_ID                        0x0254 0x051C 0x055C 0x2 0x2
+#define MX6SLL_PAD_GPIO4_IO17__SD1_VSELECT                        0x0254 0x051C 0x0000 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO17__SD3_VSELECT                        0x0254 0x051C 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO17__GPIO4_IO17                         0x0254 0x051C 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO22__SPDIF_IN                           0x0258 0x0520 0x0738 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO22__SD1_WP                             0x0258 0x0520 0x0774 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO22__SD3_WP                             0x0258 0x0520 0x0794 0x4 0x1
+#define MX6SLL_PAD_GPIO4_IO22__GPIO4_IO22                         0x0258 0x0520 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO16__SPDIF_OUT                          0x025C 0x0524 0x0000 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO16__SD1_CD_B                           0x025C 0x0524 0x0770 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO16__SD3_CD_B                           0x025C 0x0524 0x0780 0x4 0x1
+#define MX6SLL_PAD_GPIO4_IO16__GPIO4_IO16                         0x025C 0x0524 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO26__WDOG1_B                            0x0260 0x0528 0x0000 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO26__PWM4_OUT                           0x0260 0x0528 0x0000 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO26__CCM_PMIC_READY                     0x0260 0x0528 0x05AC 0x4 0x1
+#define MX6SLL_PAD_GPIO4_IO26__GPIO4_IO26                         0x0260 0x0528 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO26__SPDIF_EXT_CLK                      0x0260 0x0528 0x073C 0x6 0x0
+
+#endif /* __DTS_IMX6SLL_PINFUNC_H */

arch/arm/dts/imx6sll.dtsi

@@ -0,0 +1,859 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/clock/imx6sll-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "imx6sll-pinfunc.h"
+#include "skeleton.dtsi"
+
+/ {
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi3 = &ecspi3;
+		spi4 = &ecspi4;
+		usbphy0 = &usbphy1;
+		usbphy1 = &usbphy2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				996000  1225000
+				792000  1175000
+				396000  1075000
+				198000	975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz      SOC-PU uV */
+				996000          1225000
+				792000          1175000
+				396000          1175000
+				198000		1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			fsl,low-power-run;
+			clocks = <&clks IMX6SLL_CLK_ARM>,
+				 <&clks IMX6SLL_CLK_PLL2_PFD2>,
+				 <&clks IMX6SLL_CLK_STEP>,
+				 <&clks IMX6SLL_CLK_PLL1_SW>,
+				 <&clks IMX6SLL_CLK_PLL1_SYS>,
+				 <&clks IMX6SLL_CLK_PLL1>,
+				 <&clks IMX6SLL_PLL1_BYPASS>,
+				 <&clks IMX6SLL_PLL1_BYPASS_SRC>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys", "pll1", "pll1_bypass",
+				      "pll1_bypass_src";
+		};
+	};
+
+	intc: interrupt-controller@00a01000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00a01000 0x1000>,
+		      <0x00a00100 0x100>;
+		interrupt-parent = <&intc>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ckil: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "ckil";
+		};
+
+		osc: clock@1 {
+			compatible = "fixed-clock";
+			reg = <1>;
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+			clock-output-names = "osc";
+		};
+
+		ipp_di0: clock@2 {
+			compatible = "fixed-clock";
+			reg = <2>;
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "ipp_di0";
+		};
+
+		ipp_di1: clock@3 {
+			compatible = "fixed-clock";
+			reg = <3>;
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "ipp_di1";
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gpc>;
+		ranges;
+
+		busfreq {
+			compatible = "fsl,imx_busfreq";
+			clocks = <&clks IMX6SLL_CLK_PLL2_PFD2>, <&clks IMX6SLL_CLK_PLL2_198M>,
+				 <&clks IMX6SLL_CLK_PLL2_BUS>, <&clks IMX6SLL_CLK_ARM>,
+				 <&clks IMX6SLL_CLK_PLL3_USB_OTG>, <&clks IMX6SLL_CLK_PERIPH>,
+				 <&clks IMX6SLL_CLK_PERIPH_PRE>, <&clks IMX6SLL_CLK_PERIPH_CLK2>,
+				 <&clks IMX6SLL_CLK_PERIPH_CLK2_SEL>, <&clks IMX6SLL_CLK_OSC>,
+				 <&clks IMX6SLL_CLK_AHB>, <&clks IMX6SLL_CLK_AXI_PODF>,
+				 <&clks IMX6SLL_CLK_PERIPH2>, <&clks IMX6SLL_CLK_PERIPH2_PRE>,
+				 <&clks IMX6SLL_CLK_PERIPH2_CLK2>, <&clks IMX6SLL_CLK_PERIPH2_CLK2_SEL>,
+				 <&clks IMX6SLL_CLK_STEP>, <&clks IMX6SLL_CLK_MMDC_P0_FAST>, <&clks IMX6SLL_PLL1_BYPASS_SRC>,
+				 <&clks IMX6SLL_PLL1_BYPASS>, <&clks IMX6SLL_CLK_PLL1_SYS>, <&clks IMX6SLL_CLK_PLL1_SW>,
+				 <&clks IMX6SLL_CLK_PLL1>;
+			clock-names = "pll2_pfd2_396m", "pll2_198m", "pll2_bus", "arm", "pll3_usb_otg",
+				      "periph", "periph_pre", "periph_clk2", "periph_clk2_sel", "osc",
+				      "ahb", "ocram", "periph2", "periph2_pre", "periph2_clk2", "periph2_clk2_sel",
+				      "step", "mmdc", "pll1_bypass_src", "pll1_bypass", "pll1_sys", "pll1_sw", "pll1";
+			fsl,max_ddr_freq = <400000000>;
+		};
+
+		ocrams: sram@00900000 {
+			compatible = "fsl,lpm-sram";
+			reg = <0x00900000 0x4000>;
+		};
+
+		ocrams_ddr: sram@00904000 {
+			compatible = "fsl,ddr-lpm-sram";
+			reg = <0x00904000 0x1000>;
+		};
+
+		ocram: sram@00905000 {
+			compatible = "mmio-sram";
+			reg = <0x00905000 0x1B000>;
+		};
+
+		L2: l2-cache@00a02000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a02000 0x1000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+			arm,tag-latency = <4 2 3>;
+			arm,data-latency = <4 2 3>;
+		};
+
+		aips1: aips-bus@02000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02000000 0x100000>;
+			ranges;
+
+			spba: spba-bus@02000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x02000000 0x40000>;
+				ranges;
+
+				spdif: spdif@02004000 {
+					compatible = "fsl,imx6sl-spdif", "fsl,imx35-spdif";
+					reg = <0x02004000 0x4000>;
+					interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 14 18 0>, <&sdma 15 18 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_SPDIF_GCLK>,
+						 <&clks IMX6SLL_CLK_OSC>,
+						 <&clks IMX6SLL_CLK_SPDIF>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_IPG>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_SPBA>;
+					clock-names = "core", "rxtx0",
+						      "rxtx1", "rxtx2",
+						      "rxtx3", "rxtx4",
+						      "rxtx5", "rxtx6",
+						      "rxtx7", "dma";
+					status = "disabled";
+				};
+
+				ecspi1: ecspi@02008000 {
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02008000 0x4000>;
+					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_ECSPI1>,
+						 <&clks IMX6SLL_CLK_ECSPI1>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi2: ecspi@0200c000 {
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x0200c000 0x4000>;
+					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_ECSPI2>,
+						 <&clks IMX6SLL_CLK_ECSPI2>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi3: ecspi@02010000 {
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02010000 0x4000>;
+					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_ECSPI3>,
+						 <&clks IMX6SLL_CLK_ECSPI3>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi4: ecspi@02014000 {
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02014000 0x4000>;
+					interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_ECSPI4>,
+						 <&clks IMX6SLL_CLK_ECSPI4>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart4: serial@02018000 {
+					compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02018000 0x4000>;
+					interrupts =<GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_UART4_IPG>,
+						 <&clks IMX6SLL_CLK_UART4_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart1: serial@02020000 {
+					compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02020000 0x4000>;
+					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_UART1_IPG>,
+						 <&clks IMX6SLL_CLK_UART1_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart2: serial@02024000 {
+					compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02024000 0x4000>;
+					interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_UART2_IPG>,
+						 <&clks IMX6SLL_CLK_UART2_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ssi1: ssi@02028000 {
+					compatible = "fsl,imx6sll-ssi", "fsl,imx51-ssi";
+					reg = <0x02028000 0x4000>;
+					interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 37 22 0>, <&sdma 38 22 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					clocks = <&clks IMX6SLL_CLK_SSI1_IPG>,
+						 <&clks IMX6SLL_CLK_SSI1>;
+					clock-names = "ipg", "baud";
+					status = "disabled";
+				};
+
+				ssi2: ssi2@0202c000 {
+					compatible = "fsl,imx6sll-ssi", "fsl,imx51-ssi";
+					reg = <0x0202c000 0x4000>;
+					interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 41 22 0>, <&sdma 42 22 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					clocks = <&clks IMX6SLL_CLK_SSI2_IPG>,
+						 <&clks IMX6SLL_CLK_SSI2>;
+					clock-names = "ipg", "baud";
+					status = "disabled";
+				};
+
+				ssi3: ssi@02030000 {
+					compatible = "fsl,imx6sll-ssi", "fsl,imx51-ssi";
+					reg = <0x02030000 0x4000>;
+					interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 45 22 0>, <&sdma 46 22 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					clocks = <&clks IMX6SLL_CLK_SSI3_IPG>,
+						 <&clks IMX6SLL_CLK_SSI3>;
+					clock-names = "ipg", "baud";
+					status = "disabled";
+				};
+
+				uart3: serial@02034000 {
+					compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02034000 0x4000>;
+					interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
+					dma-name = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_UART3_IPG>,
+						 <&clks IMX6SLL_CLK_UART3_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+			};
+
+			pwm1: pwm@02080000 {
+				compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
+				reg = <0x02080000 0x4000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_PWM1>,
+					 <&clks IMX6SLL_CLK_PWM1>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+
+			pwm2: pwm@02084000 {
+				compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
+				reg = <0x02084000 0x4000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_PWM2>,
+					 <&clks IMX6SLL_CLK_PWM2>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+
+			pwm3: pwm@02088000 {
+				compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
+				reg = <0x02088000 0x4000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_PWM3>,
+					 <&clks IMX6SLL_CLK_PWM3>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+
+			pwm4: pwm@0208c000 {
+				compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
+				reg = <0x0208c000 0x4000>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_PWM4>,
+					 <&clks IMX6SLL_CLK_PWM4>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+
+			gpt1: gpt@02098000 {
+				compatible = "fsl,imx6sll-gpt";
+				reg = <0x02098000 0x4000>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_GPT_BUS>,
+					 <&clks IMX6SLL_CLK_GPT_SERIAL>;
+				clock-names = "ipg", "per";
+			};
+
+			gpio1: gpio@0209c000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x0209c000 0x4000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@020a0000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020a0000 0x4000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio3: gpio@020a4000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020a4000 0x4000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio4: gpio@020a8000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020a8000 0x4000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio5: gpio@020ac000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020ac000 0x4000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio6: gpio@020b0000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020b0000 0x4000>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			kpp: kpp@020b8000 {
+				compatible = "fsl,imx6sll-kpp", "fsl,imx21-kpp";
+				reg = <0x020b8000 0x4000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_KPP>;
+				status = "disabled";
+			};
+
+			wdog1: wdog@020bc000 {
+				compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt";
+				reg = <0x020bc000 0x4000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_WDOG1>;
+			};
+
+			wdog2: wdog@020c0000 {
+				compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt";
+				reg = <0x020c0000 0x4000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_WDOG2>;
+				status = "disabled";
+			};
+
+			clks: ccm@020c4000 {
+				compatible = "fsl,imx6sll-ccm";
+				reg = <0x020c4000 0x4000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+				clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
+				clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+			};
+
+			anatop: anatop@020c8000 {
+				compatible = "fsl,imx6sll-anatop",
+					     "fsl,imx6q-anatop",
+					     "syscon", "simple-bus";
+				reg = <0x020c8000 0x4000>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+
+				reg_3p0: regulator-3p0@120 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd3p0";
+					regulator-min-microvolt = <2625000>;
+					regulator-max-microvolt = <3400000>;
+					anatop-reg-offset = <0x120>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2625000>;
+					anatop-max-voltage = <3400000>;
+					anatop-enable-bit = <0>;
+				};
+			};
+
+			tempmon: tempmon {
+				compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon";
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				fsl,tempmon = <&anatop>;
+				fsl,tempmon-data = <&ocotp>;
+				clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>;
+				status = "disabled";
+			};
+
+			usbphy1: usbphy@020c9000 {
+				compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy",
+						"fsl,imx23-usbphy";
+				reg = <0x020c9000 0x1000>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USBPHY1>;
+				phy-3p0-supply = <&reg_3p0>;
+				fsl,anatop = <&anatop>;
+			};
+
+			usbphy2: usbphy@020ca000 {
+				compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy",
+						"fsl,imx23-usbphy";
+				reg = <0x020ca000 0x1000>;
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USBPHY2>;
+				phy-reg_3p0-supply = <&reg_3p0>;
+				fsl,anatop = <&anatop>;
+			};
+
+			snvs: snvs@020cc000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x020cc000 0x4000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					mask = <0x61>;
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					linux,keycode = <KEY_POWER>;
+					wakeup;
+				};
+			};
+
+			epit1: epit@020d0000 {
+				reg = <0x020d0000 0x4000>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			epit2: epit@020d4000 {
+				reg = <0x020d4000 0x4000>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			src: src@020d8000 {
+				compatible = "fsl,imx6sll-src", "fsl,imx51-src";
+				reg = <0x020d8000 0x4000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: gpc@020dc000 {
+				compatible = "fsl,imx6sll-gpc", "fsl,imx6q-gpc";
+				reg = <0x020dc000 0x4000>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&intc>;
+				fsl,mf-mix-wakeup-irq = <0x7c00000 0x7d00 0x0 0x1400640>;
+			};
+
+			iomuxc: iomuxc@020e0000 {
+				compatible = "fsl,imx6sll-iomuxc";
+				reg = <0x020e0000 0x4000>;
+			};
+
+			gpr: iomuxc-gpr@020e4000 {
+				compatible = "fsl,imx6sll-iomuxc-gpr",
+					     "fsl,imx6q-iomuxc-gpr", "syscon";
+				reg = <0x020e4000 0x4000>;
+			};
+
+			csi: csi@020e8000 {
+				compatible = "fsl,imx6sll-csi", "fsl,imx6s-csi";
+				reg = <0x020e8000 0x4000>;
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_DUMMY>,
+					 <&clks IMX6SLL_CLK_CSI>,
+					 <&clks IMX6SLL_CLK_DUMMY>;
+				clock-names = "disp-axi", "csi_mclk", "disp_dcic";
+				status = "disabled";
+			};
+
+			sdma: sdma@020ec000 {
+				compatible = "fsl,imx6sll-sdma", "fsl,imx35-sdma";
+				reg = <0x020ec000 0x4000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_SDMA>,
+					 <&clks IMX6SLL_CLK_SDMA>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				iram = <&ocram>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
+			};
+
+			pxp: pxp@020f0000 {
+				compatible = "fsl,imx6ull-pxp-dma", "fsl,imx7d-pxp-dma";
+				reg = <0x020f0000 0x4000>;
+				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_DUMMY>,
+					 <&clks IMX6SLL_CLK_PXP>;
+				clock-names = "pxp_ipg", "pxp_axi";
+				status = "disabled";
+			};
+
+			epdc: epdc@020f4000 {
+				compatible = "fsl,imx6sll-epdc", "fsl,imx7d-epdc";
+				reg = <0x020f4000 0x4000>;
+				interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_EPDC_AXI>, <&clks IMX6SLL_CLK_EPDC_PIX>;
+				clock-names = "epdc_axi", "epdc_pix";
+				status = "disabled";
+			};
+
+			lcdif: lcdif@020f8000 {
+				compatible = "fsl,imx6sll-lcdif", "fsl,imx28-lcdif";
+				reg = <0x020f8000 0x4000>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_LCDIF_PIX>,
+					 <&clks IMX6SLL_CLK_LCDIF_APB>,
+					 <&clks IMX6SLL_CLK_DUMMY>;
+				clock-names = "pix", "axi", "disp_axi";
+				status = "disabled";
+			};
+
+			dcp: dcp@020fc000 {
+				compatible = "fsl,imx6sl-dcp";
+				reg = <0x020fc000 0x4000>;
+				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_DCP>;
+				clock-names = "dcp";
+			};
+		};
+
+		aips2: aips-bus@02100000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02100000 0x100000>;
+			ranges;
+
+			usbotg1: usb@02184000 {
+				compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb",
+						"fsl,imx27-usb";
+				reg = <0x02184000 0x200>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy1>;
+				fsl,usbmisc = <&usbmisc 0>;
+				fsl,anatop = <&anatop>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbotg2: usb@02184200 {
+				compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb",
+						"fsl,imx27-usb";
+				reg = <0x02184200 0x200>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy2>;
+				fsl,usbmisc = <&usbmisc 1>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@02184800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx6sll-usbmisc", "fsl,imx6ul-usbmisc",
+						"fsl,imx6q-usbmisc";
+				reg = <0x02184800 0x200>;
+			};
+
+			usdhc1: usdhc@02190000 {
+				compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
+				reg = <0x02190000 0x4000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USDHC1>,
+					 <&clks IMX6SLL_CLK_USDHC1>,
+					 <&clks IMX6SLL_CLK_USDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
+				status = "disabled";
+			};
+
+			usdhc2: usdhc@02194000 {
+				compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
+				reg = <0x02194000 0x4000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USDHC2>,
+					 <&clks IMX6SLL_CLK_USDHC2>,
+					 <&clks IMX6SLL_CLK_USDHC2>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
+				status = "disabled";
+			};
+
+			usdhc3: usdhc@02198000 {
+				compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
+				reg = <0x02198000 0x4000>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USDHC3>,
+					 <&clks IMX6SLL_CLK_USDHC3>,
+					 <&clks IMX6SLL_CLK_USDHC3>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@021a0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fs,imx6sll-i2c", "fsl,imx21-i2c";
+				reg = <0x021a0000 0x4000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_I2C1>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@021a4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
+				reg = <0x021a4000 0x4000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_I2C2>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@021a8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
+				reg = <0x021a8000 0x4000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_I2C3>;
+				status = "disabled";
+			};
+
+			romcp@021ac000 {
+				compatible = "fsl,imx6sll-romcp", "syscon";
+				reg = <0x021ac000 0x4000>;
+			};
+
+			mmdc: mmdc@021b0000 {
+				compatible = "fsl,imx6sll-mmdc", "fsl,imx6q-mmdc";
+				reg = <0x021b0000 0x4000>;
+			};
+
+			rngb: rngb@021b4000 {
+				compatible = "fsl,imx6sl-rng", "fsl,imx-rng", "imx-rng";
+				reg = <0x021b4000 0x4000>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks =  <&clks IMX6SLL_CLK_DUMMY>;
+			};
+
+			ocotp: ocotp-ctrl@021bc000 {
+				compatible = "fsl,imx6sll-ocotp", "syscon";
+				reg = <0x021bc000 0x4000>;
+				clocks = <&clks IMX6SLL_CLK_OCOTP>;
+			};
+
+			csu: csu@021c0000 {
+				compatible = "fsl,imx6sll-csu";
+				reg = <0x021c0000 0x4000>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			snvs_gpr: snvs-gpr@0x021c4000 {
+				compatible = "fsl, imx6sll-snvs-gpr";
+				reg = <0x021c4000 0x10000>;
+			};
+
+			iomuxc_snvs: iomuxc-snvs@021c8000 {
+				compatible = "fsl,imx6sll-iomuxc-snvs";
+				reg = <0x021c80000 0x10000>;
+			};
+
+			audmux: audmux@021d8000 {
+				compatible = "fsl,imx6sll-audmux", "fsl,imx31-audmux";
+				reg = <0x021d8000 0x4000>;
+				status = "disabled";
+			};
+
+			uart5: serial@021f4000 {
+				compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021f4000 0x4000>;
+				interrupts =<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
+				dma-names = "rx", "tx";
+				clocks = <&clks IMX6SLL_CLK_UART5_IPG>,
+					 <&clks IMX6SLL_CLK_UART5_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+		};
+	};
+};

arch/arm/dts/imx6ul-geam-kit.dts

@@ -0,0 +1,168 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6ul.dtsi"
+
+/ {
+	model = "Engicam GEAM6UL";
+	compatible = "engicam,imx6ul-geam", "fsl,imx6ul";
+
+	memory {
+		reg = <0x80000000 0x08000000>;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock_frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <4>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
+		>;
+	};
+};

arch/arm/dts/imx6ul.dtsi

@@ -0,0 +1,942 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/clock/imx6ul-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "imx6ul-pinfunc.h"
+#include "skeleton.dtsi"
+
+/ {
+	aliases {
+		ethernet0 = &fec1;
+		ethernet1 = &fec2;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+		serial6 = &uart7;
+		serial7 = &uart8;
+		sai1 = &sai1;
+		sai2 = &sai2;
+		sai3 = &sai3;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+		spi3 = &ecspi4;
+		usbphy0 = &usbphy1;
+		usbphy1 = &usbphy2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			operating-points = <
+				/* kHz	uV */
+				528000	1175000
+				396000	1025000
+				198000	950000
+			>;
+			fsl,soc-operating-points = <
+				/* KHz	uV */
+				528000	1175000
+				396000	1175000
+				198000	1175000
+			>;
+			clocks = <&clks IMX6UL_CLK_ARM>,
+				 <&clks IMX6UL_CLK_PLL2_BUS>,
+				 <&clks IMX6UL_CLK_PLL2_PFD2>,
+				 <&clks IMX6UL_CA7_SECONDARY_SEL>,
+				 <&clks IMX6UL_CLK_STEP>,
+				 <&clks IMX6UL_CLK_PLL1_SW>,
+				 <&clks IMX6UL_CLK_PLL1_SYS>,
+				 <&clks IMX6UL_PLL1_BYPASS>,
+				 <&clks IMX6UL_CLK_PLL1>,
+				 <&clks IMX6UL_PLL1_BYPASS_SRC>,
+				 <&clks IMX6UL_CLK_OSC>;
+			clock-names = "arm", "pll2_bus",  "pll2_pfd2_396m",
+				      "secondary_sel", "step", "pll1_sw",
+				      "pll1_sys", "pll1_bypass", "pll1",
+				      "pll1_bypass_src", "osc";
+			arm-supply = <&reg_arm>;
+			soc-supply = <&reg_soc>;
+		};
+	};
+
+	intc: interrupt-controller@00a01000 {
+		compatible = "arm,cortex-a7-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00a01000 0x1000>,
+		      <0x00a02000 0x1000>,
+		      <0x00a04000 0x2000>,
+		      <0x00a06000 0x2000>;
+	};
+
+	ckil: clock-cli {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ckil";
+	};
+
+	osc: clock-osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc";
+	};
+
+	ipp_di0: clock-di0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "ipp_di0";
+	};
+
+	ipp_di1: clock-di1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "ipp_di1";
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gpc>;
+		ranges;
+
+		pmu {
+			compatible = "arm,cortex-a7-pmu";
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		ocram: sram@00900000 {
+			compatible = "mmio-sram";
+			reg = <0x00900000 0x20000>;
+		};
+
+		dma_apbh: dma-apbh@01804000 {
+			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
+			reg = <0x01804000 0x2000>;
+			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
+			#dma-cells = <1>;
+			dma-channels = <4>;
+			clocks = <&clks IMX6UL_CLK_APBHDMA>;
+		};
+
+		gpmi: gpmi-nand@01806000         {
+			compatible = "fsl,imx6q-gpmi-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x01806000 0x2000>, <0x01808000 0x2000>;
+			reg-names = "gpmi-nand", "bch";
+			interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "bch";
+			clocks = <&clks IMX6UL_CLK_GPMI_IO>,
+				 <&clks IMX6UL_CLK_GPMI_APB>,
+				 <&clks IMX6UL_CLK_GPMI_BCH>,
+				 <&clks IMX6UL_CLK_GPMI_BCH_APB>,
+				 <&clks IMX6UL_CLK_PER_BCH>;
+			clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
+				      "gpmi_bch_apb", "per1_bch";
+			dmas = <&dma_apbh 0>;
+			dma-names = "rx-tx";
+			status = "disabled";
+		};
+
+		aips1: aips-bus@02000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02000000 0x100000>;
+			ranges;
+
+			spba-bus@02000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x02000000 0x40000>;
+				ranges;
+
+				ecspi1: ecspi@02008000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02008000 0x4000>;
+					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_ECSPI1>,
+						 <&clks IMX6UL_CLK_ECSPI1>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi2: ecspi@0200c000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x0200c000 0x4000>;
+					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_ECSPI2>,
+						 <&clks IMX6UL_CLK_ECSPI2>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi3: ecspi@02010000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02010000 0x4000>;
+					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_ECSPI3>,
+						 <&clks IMX6UL_CLK_ECSPI3>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi4: ecspi@02014000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02014000 0x4000>;
+					interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_ECSPI4>,
+						 <&clks IMX6UL_CLK_ECSPI4>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart7: serial@02018000 {
+					compatible = "fsl,imx6ul-uart",
+						     "fsl,imx6q-uart";
+					reg = <0x02018000 0x4000>;
+					interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_UART7_IPG>,
+						 <&clks IMX6UL_CLK_UART7_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart1: serial@02020000 {
+					compatible = "fsl,imx6ul-uart",
+						     "fsl,imx6q-uart";
+					reg = <0x02020000 0x4000>;
+					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_UART1_IPG>,
+						 <&clks IMX6UL_CLK_UART1_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart8: serial@02024000 {
+					compatible = "fsl,imx6ul-uart",
+						     "fsl,imx6q-uart";
+					reg = <0x02024000 0x4000>;
+					interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_UART8_IPG>,
+						 <&clks IMX6UL_CLK_UART8_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				sai1: sai@02028000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
+					reg = <0x02028000 0x4000>;
+					interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_SAI1_IPG>,
+						 <&clks IMX6UL_CLK_SAI1>,
+						 <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma 35 24 0>,
+					       <&sdma 36 24 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				sai2: sai@0202c000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
+					reg = <0x0202c000 0x4000>;
+					interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_SAI2_IPG>,
+						 <&clks IMX6UL_CLK_SAI2>,
+						 <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma 37 24 0>,
+					       <&sdma 38 24 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				sai3: sai@02030000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
+					reg = <0x02030000 0x4000>;
+					interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_SAI3_IPG>,
+						 <&clks IMX6UL_CLK_SAI3>,
+						 <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma 39 24 0>,
+					       <&sdma 40 24 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+			};
+
+			tsc: tsc@02040000 {
+				compatible = "fsl,imx6ul-tsc";
+				reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_IPG>,
+					 <&clks IMX6UL_CLK_ADC2>;
+				clock-names = "tsc", "adc";
+				status = "disabled";
+			};
+
+			pwm1: pwm@02080000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x02080000 0x4000>;
+				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM1>,
+					 <&clks IMX6UL_CLK_PWM1>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm2: pwm@02084000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x02084000 0x4000>;
+				interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM2>,
+					 <&clks IMX6UL_CLK_PWM2>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm3: pwm@02088000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x02088000 0x4000>;
+				interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM3>,
+					 <&clks IMX6UL_CLK_PWM3>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm4: pwm@0208c000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x0208c000 0x4000>;
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM4>,
+					 <&clks IMX6UL_CLK_PWM4>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			can1: flexcan@02090000 {
+				compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x02090000 0x4000>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_CAN1_IPG>,
+					 <&clks IMX6UL_CLK_CAN1_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			can2: flexcan@02094000 {
+				compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x02094000 0x4000>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_CAN2_IPG>,
+					 <&clks IMX6UL_CLK_CAN2_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			gpt1: gpt@02098000 {
+				compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
+				reg = <0x02098000 0x4000>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPT1_BUS>,
+					 <&clks IMX6UL_CLK_GPT1_SERIAL>;
+				clock-names = "ipg", "per";
+			};
+
+			gpio1: gpio@0209c000 {
+				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+				reg = <0x0209c000 0x4000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0 23 10>, <&iomuxc 10 17 6>,
+					      <&iomuxc 16 33 16>;
+			};
+
+			gpio2: gpio@020a0000 {
+				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+				reg = <0x020a0000 0x4000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 49 16>, <&iomuxc 16 111 6>;
+			};
+
+			gpio3: gpio@020a4000 {
+				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+				reg = <0x020a4000 0x4000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 65 29>;
+			};
+
+			gpio4: gpio@020a8000 {
+				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+				reg = <0x020a8000 0x4000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 94 17>, <&iomuxc 17 117 12>;
+			};
+
+			gpio5: gpio@020ac000 {
+				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+				reg = <0x020ac000 0x4000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 7 10>, <&iomuxc 10 5 2>;
+			};
+
+			fec2: ethernet@020b4000 {
+				compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
+				reg = <0x020b4000 0x4000>;
+				interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_ENET>,
+					 <&clks IMX6UL_CLK_ENET_AHB>,
+					 <&clks IMX6UL_CLK_ENET_PTP>,
+					 <&clks IMX6UL_CLK_ENET2_REF_125M>,
+					 <&clks IMX6UL_CLK_ENET2_REF_125M>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref", "enet_out";
+				fsl,num-tx-queues=<1>;
+				fsl,num-rx-queues=<1>;
+				status = "disabled";
+			};
+
+			kpp: kpp@020b8000 {
+				compatible = "fsl,imx6ul-kpp", "fsl,imx6q-kpp", "fsl,imx21-kpp";
+				reg = <0x020b8000 0x4000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_KPP>;
+				status = "disabled";
+			};
+
+			wdog1: wdog@020bc000 {
+				compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
+				reg = <0x020bc000 0x4000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_WDOG1>;
+			};
+
+			wdog2: wdog@020c0000 {
+				compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
+				reg = <0x020c0000 0x4000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_WDOG2>;
+				status = "disabled";
+			};
+
+			clks: ccm@020c4000 {
+				compatible = "fsl,imx6ul-ccm";
+				reg = <0x020c4000 0x4000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+				clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
+				clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+			};
+
+			anatop: anatop@020c8000 {
+				compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop",
+					     "syscon", "simple-bus";
+				reg = <0x020c8000 0x1000>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+
+				reg_3p0: regulator-3p0 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd3p0";
+					regulator-min-microvolt = <2625000>;
+					regulator-max-microvolt = <3400000>;
+					anatop-reg-offset = <0x120>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2625000>;
+					anatop-max-voltage = <3400000>;
+					anatop-enable-bit = <0>;
+				};
+
+				reg_arm: regulator-vddcore {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "cpu";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <0>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <24>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				reg_soc: regulator-vddsoc {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddsoc";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <18>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <28>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+			};
+
+			usbphy1: usbphy@020c9000 {
+				compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020c9000 0x1000>;
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USBPHY1>;
+				phy-3p0-supply = <&reg_3p0>;
+				fsl,anatop = <&anatop>;
+			};
+
+			usbphy2: usbphy@020ca000 {
+				compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020ca000 0x1000>;
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USBPHY2>;
+				phy-3p0-supply = <&reg_3p0>;
+				fsl,anatop = <&anatop>;
+			};
+
+			snvs: snvs@020cc000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x020cc000 0x4000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					mask = <0x60>;
+					status = "disabled";
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+				};
+			};
+
+			epit1: epit@020d0000 {
+				reg = <0x020d0000 0x4000>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			epit2: epit@020d4000 {
+				reg = <0x020d4000 0x4000>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			src: src@020d8000 {
+				compatible = "fsl,imx6ul-src", "fsl,imx51-src";
+				reg = <0x020d8000 0x4000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: gpc@020dc000 {
+				compatible = "fsl,imx6ul-gpc", "fsl,imx6q-gpc";
+				reg = <0x020dc000 0x4000>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&intc>;
+			};
+
+			iomuxc: iomuxc@020e0000 {
+				compatible = "fsl,imx6ul-iomuxc";
+				reg = <0x020e0000 0x4000>;
+			};
+
+			gpr: iomuxc-gpr@020e4000 {
+				compatible = "fsl,imx6ul-iomuxc-gpr",
+					     "fsl,imx6q-iomuxc-gpr", "syscon";
+				reg = <0x020e4000 0x4000>;
+			};
+
+			gpt2: gpt@020e8000 {
+				compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
+				reg = <0x020e8000 0x4000>;
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPT2_BUS>,
+					 <&clks IMX6UL_CLK_GPT2_SERIAL>;
+				clock-names = "ipg", "per";
+			};
+
+			sdma: sdma@020ec000 {
+				compatible = "fsl,imx6ul-sdma", "fsl,imx6q-sdma",
+					     "fsl,imx35-sdma";
+				reg = <0x020ec000 0x4000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_SDMA>,
+					 <&clks IMX6UL_CLK_SDMA>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
+			};
+
+			pwm5: pwm@020f0000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x020f0000 0x4000>;
+				interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM5>,
+					 <&clks IMX6UL_CLK_PWM5>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm6: pwm@020f4000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x020f4000 0x4000>;
+				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM6>,
+					 <&clks IMX6UL_CLK_PWM6>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm7: pwm@020f8000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x020f8000 0x4000>;
+				interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM7>,
+					 <&clks IMX6UL_CLK_PWM7>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm8: pwm@020fc000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x020fc000 0x4000>;
+				interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM8>,
+					 <&clks IMX6UL_CLK_PWM8>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+		};
+
+		aips2: aips-bus@02100000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02100000 0x100000>;
+			ranges;
+
+			usbotg1: usb@02184000 {
+				compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
+				reg = <0x02184000 0x200>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy1>;
+				fsl,usbmisc = <&usbmisc 0>;
+				fsl,anatop = <&anatop>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbotg2: usb@02184200 {
+				compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
+				reg = <0x02184200 0x200>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy2>;
+				fsl,usbmisc = <&usbmisc 1>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@02184800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx6ul-usbmisc", "fsl,imx6q-usbmisc";
+				reg = <0x02184800 0x200>;
+			};
+
+			fec1: ethernet@02188000 {
+				compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
+				reg = <0x02188000 0x4000>;
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_ENET>,
+					 <&clks IMX6UL_CLK_ENET_AHB>,
+					 <&clks IMX6UL_CLK_ENET_PTP>,
+					 <&clks IMX6UL_CLK_ENET_REF>,
+					 <&clks IMX6UL_CLK_ENET_REF>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref", "enet_out";
+				fsl,num-tx-queues=<1>;
+				fsl,num-rx-queues=<1>;
+				status = "disabled";
+			};
+
+			usdhc1: usdhc@02190000 {
+				compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
+				reg = <0x02190000 0x4000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USDHC1>,
+					 <&clks IMX6UL_CLK_USDHC1>,
+					 <&clks IMX6UL_CLK_USDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: usdhc@02194000 {
+				compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
+				reg = <0x02194000 0x4000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USDHC2>,
+					 <&clks IMX6UL_CLK_USDHC2>,
+					 <&clks IMX6UL_CLK_USDHC2>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			adc1: adc@02198000 {
+				compatible = "fsl,imx6ul-adc", "fsl,vf610-adc";
+				reg = <0x02198000 0x4000>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_ADC1>;
+				num-channels = <2>;
+				clock-names = "adc";
+				fsl,adck-max-frequency = <30000000>, <40000000>,
+							 <20000000>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@021a0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
+				reg = <0x021a0000 0x4000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_I2C1>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@021a4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
+				reg = <0x021a4000 0x4000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_I2C2>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@021a8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
+				reg = <0x021a8000 0x4000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_I2C3>;
+				status = "disabled";
+			};
+
+			mmdc: mmdc@021b0000 {
+				compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc";
+				reg = <0x021b0000 0x4000>;
+			};
+
+			lcdif: lcdif@021c8000 {
+				compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif";
+				reg = <0x021c8000 0x4000>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_LCDIF_PIX>,
+					 <&clks IMX6UL_CLK_LCDIF_APB>,
+					 <&clks IMX6UL_CLK_DUMMY>;
+				clock-names = "pix", "axi", "disp_axi";
+				status = "disabled";
+			};
+
+			qspi: qspi@021e0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi";
+				reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
+				reg-names = "QuadSPI", "QuadSPI-memory";
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_QSPI>,
+					 <&clks IMX6UL_CLK_QSPI>;
+				clock-names = "qspi_en", "qspi";
+				status = "disabled";
+			};
+
+			uart2: serial@021e8000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x021e8000 0x4000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_UART2_IPG>,
+					 <&clks IMX6UL_CLK_UART2_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart3: serial@021ec000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x021ec000 0x4000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_UART3_IPG>,
+					 <&clks IMX6UL_CLK_UART3_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart4: serial@021f0000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x021f0000 0x4000>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_UART4_IPG>,
+					 <&clks IMX6UL_CLK_UART4_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart5: serial@021f4000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x021f4000 0x4000>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_UART5_IPG>,
+					 <&clks IMX6UL_CLK_UART5_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c4: i2c@021f8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
+				reg = <0x021f8000 0x4000>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_I2C4>;
+				status = "disabled";
+			};
+
+			uart6: serial@021fc000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x021fc000 0x4000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_UART6_IPG>,
+					 <&clks IMX6UL_CLK_UART6_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+		};
+	};
+};

arch/arm/dts/vf.dtsi

@@ -35,6 +35,7 @@
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
+			reg = <0x40000000 0x00070000>;
 			ranges;
 
 			uart0: serial@40027000 {
@@ -130,6 +131,7 @@
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
+			reg = <0x40080000 0x0007f000>;
 			ranges;
 
 			uart4: serial@400a9000 {

arch/arm/imx-common/cache.c

@@ -8,6 +8,7 @@
 #include <asm/armv7.h>
 #include <asm/pl310.h>
 #include <asm/io.h>
+#include <asm/imx-common/sys_proto.h>
 
 #ifndef CONFIG_SYS_DCACHE_OFF
 void enable_caches(void)
@@ -39,6 +40,7 @@ void enable_caches(void)
 void v7_outer_cache_enable(void)
 {
 	struct pl310_regs *const pl310 = (struct pl310_regs *)L2_PL310_BASE;
+	struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
 	unsigned int val;
 
 
@@ -55,15 +57,14 @@ void v7_outer_cache_enable(void)
 	 */
 	setbits_le32(&pl310->pl310_aux_ctrl, L310_SHARED_ATT_OVERRIDE_ENABLE);
 
-#if defined CONFIG_MX6SL
+	if (is_mx6sl() || is_mx6sll()) {
-	struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
+		val = readl(&iomux->gpr[11]);
-	val = readl(&iomux->gpr[11]);
+		if (val & IOMUXC_GPR11_L2CACHE_AS_OCRAM) {
-	if (val & IOMUXC_GPR11_L2CACHE_AS_OCRAM) {
+			/* L2 cache configured as OCRAM, reset it */
-		/* L2 cache configured as OCRAM, reset it */
+			val &= ~IOMUXC_GPR11_L2CACHE_AS_OCRAM;
-		val &= ~IOMUXC_GPR11_L2CACHE_AS_OCRAM;
+			writel(val, &iomux->gpr[11]);
-		writel(val, &iomux->gpr[11]);
+		}
 	}
-#endif
 
 	writel(0x132, &pl310->pl310_tag_latency_ctrl);
 	writel(0x132, &pl310->pl310_data_latency_ctrl);

arch/arm/imx-common/cpu.c

@@ -155,6 +155,8 @@ const char *get_imx_type(u32 imxtype)
 		return "6SOLO";	/* Solo version of the mx6 */
 	case MXC_CPU_MX6SL:
 		return "6SL";	/* Solo-Lite version of the mx6 */
+	case MXC_CPU_MX6SLL:
+		return "6SLL";	/* SLL version of the mx6 */
 	case MXC_CPU_MX6SX:
 		return "6SX";   /* SoloX version of the mx6 */
 	case MXC_CPU_MX6UL:

arch/arm/imx-common/iomux-v3.c

@@ -31,7 +31,7 @@ void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
 		(pad & MUX_PAD_CTRL_OFS_MASK) >> MUX_PAD_CTRL_OFS_SHIFT;
 	u32 pad_ctrl = (pad & MUX_PAD_CTRL_MASK) >> MUX_PAD_CTRL_SHIFT;
 
-#if defined CONFIG_MX6SL
+#if defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL)
 	/* Check whether LVE bit needs to be set */
 	if (pad_ctrl & PAD_CTL_LVE) {
 		pad_ctrl &= ~PAD_CTL_LVE;
@@ -51,7 +51,7 @@ void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
 			sel_input_ofs += IOMUX_LPSR_SEL_INPUT_OFS;
 	}
 #else
-	if (is_mx6ull()) {
+	if (is_mx6ull() || is_mx6sll()) {
 		if (lpsr == IOMUX_CONFIG_LPSR) {
 			base = (void *)IOMUXC_SNVS_BASE_ADDR;
 			mux_mode &= ~IOMUX_CONFIG_LPSR;
@@ -60,7 +60,7 @@ void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
 #endif
 #endif
 
-	if (is_soc_type(MXC_SOC_MX7) || is_cpu_type(MXC_CPU_MX6ULL) || mux_ctrl_ofs)
+	if (is_mx7() || is_mx6ull() || is_mx6sll() || mux_ctrl_ofs)
 		__raw_writel(mux_mode, base + mux_ctrl_ofs);
 
 	if (sel_input_ofs)
@@ -73,6 +73,10 @@ void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
 #else
 	if (!(pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs)
 		__raw_writel(pad_ctrl, base + pad_ctrl_ofs);
+#if defined(CONFIG_MX6SLL)
+	else if ((pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs)
+		clrbits_le32(base + pad_ctrl_ofs, PAD_CTL_IPD_BIT);
+#endif
 #endif
 
 #ifdef CONFIG_IOMUX_LPSR

arch/arm/imx-common/spl.c

@@ -14,9 +14,6 @@
 #include <spl.h>
 
 #if defined(CONFIG_MX6)
-#define MX6_MMC_PORT_MASK	GENMASK(12, 11)
-#define MX6_MMC_PORT_2		BIT(11)
-
 /* determine boot device from SRC_SBMR1 (BOOT_CFG[4:1]) or SRC_GPR9 register */
 u32 spl_boot_device(void)
 {
@@ -58,11 +55,10 @@ u32 spl_boot_device(void)
 	/* SD/eSD: 8.5.3, Table 8-15  */
 	case 0x4:
 	case 0x5:
+		return BOOT_DEVICE_MMC1;
 	/* MMC/eMMC: 8.5.3 */
 	case 0x6:
 	case 0x7:
-		if ((reg & MX6_MMC_PORT_MASK) == MX6_MMC_PORT_2)
-			return BOOT_DEVICE_MMC2;
 		return BOOT_DEVICE_MMC1;
 	/* NAND Flash: 8.5.2 */
 	case 0x8 ... 0xf:

arch/arm/imx-common/timer.c

@@ -45,7 +45,7 @@ static inline int gpt_has_clk_source_osc(void)
 #if defined(CONFIG_MX6)
 	if (((is_mx6dq()) && (soc_rev() > CHIP_REV_1_0)) ||
 	    is_mx6dqp() || is_mx6sdl() || is_mx6sx() || is_mx6ul() ||
-	    is_mx6ull())
+	    is_mx6ull() || is_mx6sll())
 		return 1;
 
 	return 0;
@@ -84,8 +84,12 @@ int timer_init(void)
 	if (gpt_has_clk_source_osc()) {
 		i |= GPTCR_CLKSOURCE_OSC | GPTCR_TEN;
 
-		/* For DL/S, SX, UL, ULL set 24Mhz OSC Enable bit and prescaler */
+		/*
-		if (is_mx6sdl() || is_mx6sx() || is_mx6ul() || is_mx6ull()) {
+		 * For DL/S, SX, UL, ULL, SLL set 24Mhz OSC
+		 * Enable bit and prescaler
+		 */
+		if (is_mx6sdl() || is_mx6sx() || is_mx6ul() || is_mx6ull() ||
+		    is_mx6sll()) {
 			i |= GPTCR_24MEN;
 
 			/* Produce 3Mhz clock */

arch/arm/include/asm/arch-imx/cpu.h

@@ -19,7 +19,8 @@
 #define MXC_CPU_MX6UL		0x64
 #define MXC_CPU_MX6ULL		0x65
 #define MXC_CPU_MX6SOLO		0x66 /* dummy */
-#define MXC_CPU_MX6D		0x67
+#define MXC_CPU_MX6SLL		0x67
+#define MXC_CPU_MX6D		0x6A
 #define MXC_CPU_MX6DP		0x68
 #define MXC_CPU_MX6QP		0x69
 #define MXC_CPU_MX7S		0x71 /* dummy ID */

arch/arm/include/asm/arch-mx6/clock.h

@@ -74,7 +74,7 @@ int enable_spi_clk(unsigned char enable, unsigned spi_num);
 void enable_ipu_clock(void);
 int enable_fec_anatop_clock(int fec_id, enum enet_freq freq);
 void enable_enet_clk(unsigned char enable);
-int enable_lcdif_clock(u32 base_addr);
+int enable_lcdif_clock(u32 base_addr, bool enable);
 void enable_qspi_clk(int qspi_num);
 void enable_thermal_clk(void);
 void mxs_set_lcdclk(u32 base_addr, u32 freq);

arch/arm/include/asm/arch-mx6/crm_regs.h

@@ -307,6 +307,9 @@ struct mxc_ccm_reg {
 /* LCFIF2_PODF on i.MX6SX */
 #define MXC_CCM_CSCMR1_LCDIF2_PODF_MASK			(0x7 << 20)
 #define MXC_CCM_CSCMR1_LCDIF2_PODF_OFFSET               20
+/* LCDIF_PIX_PODF on i.MX6SL */
+#define MXC_CCM_CSCMR1_LCDIF_PIX_PODF_MASK		(0x7 << 20)
+#define MXC_CCM_CSCMR1_LCDIF_PIX_PODF_OFFSET		20
 /* ACLK_EMI on i.MX6DQ/SDL/DQP */
 #define MXC_CCM_CSCMR1_ACLK_EMI_PODF_MASK		(0x7 << 20)
 #define MXC_CCM_CSCMR1_ACLK_EMI_PODF_OFFSET		20
@@ -529,6 +532,12 @@ struct mxc_ccm_reg {
 #define MXC_CCM_CSCDR2_LCDIF2_CLK_SEL_MASK              (0x7 << 0)
 #define MXC_CCM_CSCDR2_LCDIF2_CLK_SEL_OFFSET             0
 
+/*LCD on i.MX6SL */
+#define MXC_CCM_CSCDR2_LCDIF_PIX_CLK_SEL_MASK		(0x7 << 6)
+#define MXC_CCM_CSCDR2_LCDIF_PIX_CLK_SEL_OFFSET		6
+#define MXC_CCM_CSCDR2_LCDIF_PIX_PRE_DIV_MASK		(0x7 << 3)
+#define MXC_CCM_CSCDR2_LCDIF_PIX_PRE_DIV_OFFSET		3
+
 /* All IPU2_DI1 are LCDIF1 on MX6SX */
 #define MXC_CCM_CHSCCDR_IPU2_DI1_PRE_CLK_SEL_MASK	(0x7 << 15)
 #define MXC_CCM_CHSCCDR_IPU2_DI1_PRE_CLK_SEL_OFFSET	15
@@ -554,6 +563,12 @@ struct mxc_ccm_reg {
 #define MXC_CCM_CSCDR3_IPU1_HSP_CLK_SEL_MASK		(0x3 << 9)
 #define MXC_CCM_CSCDR3_IPU1_HSP_CLK_SEL_OFFSET		9
 
+/* For i.MX6SL */
+#define MXC_CCM_CSCDR3_LCDIF_AXI_PODF_MASK		(0x7 << 16)
+#define MXC_CCM_CSCDR3_LCDIF_AXI_PODF_OFFSET		16
+#define MXC_CCM_CSCDR3_LCDIF_AXI_CLK_SEL_MASK		(0x3 << 14)
+#define MXC_CCM_CSCDR3_LCDIF_AXI_CLK_SEL_OFFSET		14
+
 /* Define the bits in register CDHIPR */
 #define MXC_CCM_CDHIPR_ARM_PODF_BUSY			(1 << 16)
 #define MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY		(1 << 5)
@@ -783,6 +798,12 @@ struct mxc_ccm_reg {
 #define MXC_CCM_CCGR3_QSPI_OFFSET				14
 #define MXC_CCM_CCGR3_QSPI_MASK					(3 << MXC_CCM_CCGR3_QSPI_OFFSET)
 
+/* i.MX6SL */
+#define MXC_CCM_CCGR3_LCDIF_AXI_OFFSET				6
+#define MXC_CCM_CCGR3_LCDIF_AXI_MASK				(3 << MXC_CCM_CCGR3_LCDIF_AXI_OFFSET)
+#define MXC_CCM_CCGR3_LCDIF_PIX_OFFSET				8
+#define MXC_CCM_CCGR3_LCDIF_PIX_MASK				(3 << MXC_CCM_CCGR3_LCDIF_PIX_OFFSET)
+
 #define MXC_CCM_CCGR3_IPU1_IPU_OFFSET				0
 #define MXC_CCM_CCGR3_IPU1_IPU_MASK				(3 << MXC_CCM_CCGR3_IPU1_IPU_OFFSET)
 #define MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET			2

arch/arm/include/asm/arch-mx6/imx-regs.h

@@ -26,7 +26,7 @@
 #define APBH_DMA_ARB_END_ADDR           0x0180BFFF
 #define M4_BOOTROM_BASE_ADDR			0x007F8000
 
-#else
+#elif !defined(CONFIG_MX6SLL)
 #define CAAM_ARB_BASE_ADDR              0x00100000
 #define CAAM_ARB_END_ADDR               0x00103FFF
 #define APBH_DMA_ARB_BASE_ADDR          0x00110000
@@ -46,13 +46,9 @@
 #define MXS_BCH_BASE			(APBH_DMA_ARB_BASE_ADDR + 0x04000)
 
 /* GPV - PL301 configuration ports */
-#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
+#if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || \
+	defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL))
 #define GPV2_BASE_ADDR                  0x00D00000
-#else
-#define GPV2_BASE_ADDR			0x00200000
-#endif
-
-#if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
 #define GPV3_BASE_ADDR			0x00E00000
 #define GPV4_BASE_ADDR			0x00F00000
 #define GPV5_BASE_ADDR			0x01000000
@@ -61,6 +57,7 @@
 #define PCIE_ARB_END_ADDR               0x08FFFFFF
 
 #else
+#define GPV2_BASE_ADDR			0x00200000
 #define GPV3_BASE_ADDR			0x00300000
 #define GPV4_BASE_ADDR			0x00800000
 #define PCIE_ARB_BASE_ADDR              0x01000000
@@ -96,7 +93,7 @@
 #define WEIM_ARB_END_ADDR               0x57FFFFFF
 #define QSPI0_AMBA_BASE                 0x60000000
 #define QSPI0_AMBA_END                  0x6FFFFFFF
-#else
+#elif !defined(CONFIG_MX6SLL)
 #define SATA_ARB_BASE_ADDR              0x02200000
 #define SATA_ARB_END_ADDR               0x02203FFF
 #define OPENVG_ARB_BASE_ADDR            0x02204000
@@ -111,7 +108,8 @@
 #define WEIM_ARB_END_ADDR               0x0FFFFFFF
 #endif
 
-#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
+#if (defined(CONFIG_MX6SLL) || defined(CONFIG_MX6SL) || \
+	defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
 #define MMDC0_ARB_BASE_ADDR             0x80000000
 #define MMDC0_ARB_END_ADDR              0xFFFFFFFF
 #define MMDC1_ARB_BASE_ADDR             0xC0000000
@@ -141,19 +139,21 @@
 #define ECSPI2_BASE_ADDR            (ATZ1_BASE_ADDR + 0x0C000)
 #define ECSPI3_BASE_ADDR            (ATZ1_BASE_ADDR + 0x10000)
 #define ECSPI4_BASE_ADDR            (ATZ1_BASE_ADDR + 0x14000)
-#ifdef CONFIG_MX6SL
+
-#define UART5_IPS_BASE_ADDR         (ATZ1_BASE_ADDR + 0x18000)
+#define MX6SL_UART5_BASE_ADDR       (ATZ1_BASE_ADDR + 0x18000)
-#define UART1_IPS_BASE_ADDR         (ATZ1_BASE_ADDR + 0x20000)
+#define MX6SLL_UART4_BASE_ADDR      (ATZ1_BASE_ADDR + 0x18000)
-#define UART2_IPS_BASE_ADDR         (ATZ1_BASE_ADDR + 0x24000)
+#define MX6UL_UART7_BASE_ADDR       (ATZ1_BASE_ADDR + 0x18000)
-#define SSI1_IPS_BASE_ADDR          (ATZ1_BASE_ADDR + 0x28000)
+#define MX6SL_UART2_BASE_ADDR       (ATZ1_BASE_ADDR + 0x24000)
-#define SSI2_IPS_BASE_ADDR          (ATZ1_BASE_ADDR + 0x2C000)
+#define MX6SLL_UART2_BASE_ADDR      (ATZ1_BASE_ADDR + 0x24000)
-#define SSI3_IPS_BASE_ADDR          (ATZ1_BASE_ADDR + 0x30000)
+#define MX6UL_UART8_BASE_ADDR       (ATZ1_BASE_ADDR + 0x24000)
-#define UART3_IPS_BASE_ADDR         (ATZ1_BASE_ADDR + 0x34000)
+#define MX6SL_UART3_BASE_ADDR       (ATZ1_BASE_ADDR + 0x34000)
-#define UART4_IPS_BASE_ADDR         (ATZ1_BASE_ADDR + 0x38000)
+#define MX6SLL_UART3_BASE_ADDR      (ATZ1_BASE_ADDR + 0x34000)
-#else
+#define MX6SL_UART4_BASE_ADDR       (ATZ1_BASE_ADDR + 0x38000)
+
 #ifndef CONFIG_MX6SX
 #define ECSPI5_BASE_ADDR            (ATZ1_BASE_ADDR + 0x18000)
 #endif
+#define UART1_IPS_BASE_ADDR         (ATZ1_BASE_ADDR + 0x20000)
 #define UART1_BASE                  (ATZ1_BASE_ADDR + 0x20000)
 #define ESAI1_BASE_ADDR             (ATZ1_BASE_ADDR + 0x24000)
 #define UART8_BASE                  (ATZ1_BASE_ADDR + 0x24000)
@@ -161,7 +161,6 @@
 #define SSI2_BASE_ADDR              (ATZ1_BASE_ADDR + 0x2C000)
 #define SSI3_BASE_ADDR              (ATZ1_BASE_ADDR + 0x30000)
 #define ASRC_BASE_ADDR              (ATZ1_BASE_ADDR + 0x34000)
-#endif
 
 #ifndef CONFIG_MX6SX
 #define SPBA_BASE_ADDR              (ATZ1_BASE_ADDR + 0x3C000)
@@ -176,6 +175,8 @@
 #define PWM4_BASE_ADDR              (AIPS1_OFF_BASE_ADDR + 0xC000)
 #define CAN1_BASE_ADDR              (AIPS1_OFF_BASE_ADDR + 0x10000)
 #define CAN2_BASE_ADDR              (AIPS1_OFF_BASE_ADDR + 0x14000)
+/* QOSC on i.MX6SLL */
+#define QOSC_BASE_ADDR              (AIPS1_OFF_BASE_ADDR + 0x14000)
 #define GPT1_BASE_ADDR              (AIPS1_OFF_BASE_ADDR + 0x18000)
 #define GPIO1_BASE_ADDR             (AIPS1_OFF_BASE_ADDR + 0x1C000)
 #define GPIO2_BASE_ADDR             (AIPS1_OFF_BASE_ADDR + 0x20000)
@@ -198,11 +199,18 @@
 #define SRC_BASE_ADDR               (AIPS1_OFF_BASE_ADDR + 0x58000)
 #define GPC_BASE_ADDR               (AIPS1_OFF_BASE_ADDR + 0x5C000)
 #define IOMUXC_BASE_ADDR            (AIPS1_OFF_BASE_ADDR + 0x60000)
-#ifdef CONFIG_MX6SL
+#define IOMUXC_GPR_BASE_ADDR        (AIPS1_OFF_BASE_ADDR + 0x64000)
+#ifdef CONFIG_MX6SLL
+#define CSI_BASE_ADDR               (AIPS1_OFF_BASE_ADDR + 0x68000)
+#define SDMA_PORT_HOST_BASE_ADDR    (AIPS1_OFF_BASE_ADDR + 0x6C000)
+#define PXP_BASE_ADDR               (AIPS1_OFF_BASE_ADDR + 0x70000)
+#define EPDC_BASE_ADDR              (AIPS1_OFF_BASE_ADDR + 0x74000)
+#define DCP_BASE_ADDR               (AIPS1_OFF_BASE_ADDR + 0x7C000)
+#elif defined(CONFIG_MX6SL)
 #define CSI_BASE_ADDR               (AIPS1_OFF_BASE_ADDR + 0x64000)
 #define SIPIX_BASE_ADDR             (AIPS1_OFF_BASE_ADDR + 0x68000)
 #define SDMA_PORT_HOST_BASE_ADDR    (AIPS1_OFF_BASE_ADDR + 0x6C000)
-#elif CONFIG_MX6SX
+#elif defined(CONFIG_MX6SX)
 #define CANFD1_BASE_ADDR            (AIPS1_OFF_BASE_ADDR + 0x68000)
 #define SDMA_BASE_ADDR              (AIPS1_OFF_BASE_ADDR + 0x6C000)
 #define CANFD2_BASE_ADDR            (AIPS1_OFF_BASE_ADDR + 0x70000)
@@ -215,6 +223,9 @@
 #define DMA_REQ_PORT_HOST_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x6C000)
 #endif
 
+#define MX6SL_LCDIF_BASE_ADDR      (AIPS1_OFF_BASE_ADDR + 0x78000)
+#define MX6SLL_LCDIF_BASE_ADDR      (AIPS1_OFF_BASE_ADDR + 0x78000)
+
 #define AIPS2_ON_BASE_ADDR          (ATZ2_BASE_ADDR + 0x7C000)
 #define AIPS2_OFF_BASE_ADDR         (ATZ2_BASE_ADDR + 0x80000)
 #define AIPS3_ON_BASE_ADDR          (ATZ3_BASE_ADDR + 0x7C000)
@@ -249,7 +260,7 @@
 #define I2C3_BASE_ADDR              (AIPS2_OFF_BASE_ADDR + 0x28000)
 #define ROMCP_BASE_ADDR             (AIPS2_OFF_BASE_ADDR + 0x2C000)
 #define MMDC_P0_BASE_ADDR           (AIPS2_OFF_BASE_ADDR + 0x30000)
-/* i.MX6SL */
+/* i.MX6SL/SLL */
 #define RNGB_IPS_BASE_ADDR          (AIPS2_OFF_BASE_ADDR + 0x34000)
 #ifdef CONFIG_MX6UL
 #define ENET2_BASE_ADDR             (AIPS1_OFF_BASE_ADDR + 0x34000)
@@ -263,6 +274,10 @@
 #define WEIM_BASE_ADDR              (AIPS2_OFF_BASE_ADDR + 0x38000)
 #define OCOTP_BASE_ADDR             (AIPS2_OFF_BASE_ADDR + 0x3C000)
 #define CSU_BASE_ADDR               (AIPS2_OFF_BASE_ADDR + 0x40000)
+#ifdef CONFIG_MX6SLL
+#define IOMUXC_GPR_SNVS_BASE_ADDR    (AIPS2_OFF_BASE_ADDR + 0x44000)
+#define IOMUXC_SNVS_BASE_ADDR        (AIPS2_OFF_BASE_ADDR + 0x48000)
+#endif
 #define IP2APB_PERFMON1_BASE_ADDR   (AIPS2_OFF_BASE_ADDR + 0x44000)
 #define IP2APB_PERFMON2_BASE_ADDR   (AIPS2_OFF_BASE_ADDR + 0x48000)
 #define MX6UL_LCDIF1_BASE_ADDR      (AIPS2_OFF_BASE_ADDR + 0x48000)
@@ -296,6 +311,8 @@
 #define I2C4_BASE_ADDR              (AIPS2_OFF_BASE_ADDR + 0x78000)
 #define IP2APB_USBPHY1_BASE_ADDR    (AIPS2_OFF_BASE_ADDR + 0x78000)
 #define IP2APB_USBPHY2_BASE_ADDR    (AIPS2_OFF_BASE_ADDR + 0x7C000)
+/* i.MX6SLL */
+#define MTR_MASTER_BASE_ADDR        (AIPS2_OFF_BASE_ADDR + 0x7C000)
 
 #ifdef CONFIG_MX6SX
 #define GIS_BASE_ADDR               (AIPS3_ARB_BASE_ADDR + 0x04000)
@@ -334,7 +351,8 @@
 #define MX6SX_LCDIF1_BASE_ADDR      (AIPS3_ARB_BASE_ADDR + 0x20000)
 #define MX6SX_WDOG3_BASE_ADDR       (AIPS3_ARB_BASE_ADDR + 0x88000)
 
-#if !(defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
+#if !(defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || \
+	defined(CONFIG_MX6SLL) || defined(CONFIG_MX6SL))
 #define IRAM_SIZE                    0x00040000
 #else
 #define IRAM_SIZE                    0x00020000
@@ -348,10 +366,14 @@
 /* only for i.MX6SX/UL */
 #define WDOG3_BASE_ADDR ((is_mx6ul() ?	\
 			 MX6UL_WDOG3_BASE_ADDR :  MX6SX_WDOG3_BASE_ADDR))
-#define LCDIF1_BASE_ADDR ((is_mx6ul()) ?	\
+#define LCDIF1_BASE_ADDR ((is_cpu_type(MXC_CPU_MX6SLL)) ?	\
+			  MX6SLL_LCDIF_BASE_ADDR :		\
+			  (is_cpu_type(MXC_CPU_MX6SL)) ?	\
+			  MX6SL_LCDIF_BASE_ADDR :		\
+			  ((is_cpu_type(MXC_CPU_MX6UL)) ?	\
 			  MX6UL_LCDIF1_BASE_ADDR :		\
 			  ((is_mx6ull()) ?	\
-			  MX6ULL_LCDIF1_BASE_ADDR : MX6SX_LCDIF1_BASE_ADDR))
+			  MX6ULL_LCDIF1_BASE_ADDR : MX6SX_LCDIF1_BASE_ADDR)))
 
 
 extern void imx_get_mac_from_fuse(int dev_id, unsigned char *mac);
@@ -672,7 +694,8 @@ struct cspi_regs {
 #define MXC_CSPICON_POL		4  /* SCLK polarity */
 #define MXC_CSPICON_SSPOL	12 /* SS polarity */
 #define MXC_CSPICON_CTL		20 /* inactive state of SCLK */
-#if defined(CONFIG_MX6SL) || defined(CONFIG_MX6DL) || defined(CONFIG_MX6UL)
+#if defined(CONFIG_MX6SLL) || defined(CONFIG_MX6SL) || \
+	defined(CONFIG_MX6DL) || defined(CONFIG_MX6UL)
 #define MXC_SPI_BASE_ADDRESSES \
 	ECSPI1_BASE_ADDR, \
 	ECSPI2_BASE_ADDR, \

arch/arm/include/asm/arch-mx6/mx6-pins.h

@@ -33,6 +33,8 @@ enum {
 	MX6_PAD_DECLARE(MX6_PAD_,name, pco, mc, mm, sio, si, pc),
 #include "mx6dl_pins.h"
 };
+#elif defined(CONFIG_MX6SLL)
+#include "mx6sll_pins.h"
 #elif defined(CONFIG_MX6SL)
 #include "mx6sl_pins.h"
 #elif defined(CONFIG_MX6SX)

arch/arm/include/asm/imx-common/iomux-v3.h

@@ -144,10 +144,12 @@ typedef u64 iomux_v3_cfg_t;
 #define PAD_CTL_DSE_40ohm	(6 << 3)
 #define PAD_CTL_DSE_34ohm	(7 << 3)
 
-#if defined CONFIG_MX6SL
+/* i.MX6SL/SLL */
 #define PAD_CTL_LVE		(1 << 1)
 #define PAD_CTL_LVE_BIT		(1 << 22)
-#endif
+
+/* i.MX6SLL */
+#define PAD_CTL_IPD_BIT		(1 << 27)
 
 #elif defined(CONFIG_VF610)
 

arch/arm/include/asm/imx-common/regs-lcdif.h

@@ -20,7 +20,7 @@ struct mxs_lcdif_regs {
 	mxs_reg_32(hw_lcdif_ctrl)		/* 0x00 */
 	mxs_reg_32(hw_lcdif_ctrl1)		/* 0x10 */
 #if defined(CONFIG_MX28) || defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || \
-	defined(CONFIG_MX7)
+	defined(CONFIG_MX7) || defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL)
 	mxs_reg_32(hw_lcdif_ctrl2)		/* 0x20 */
 #endif
 	mxs_reg_32(hw_lcdif_transfer_count)	/* 0x20/0x30 */
@@ -56,7 +56,7 @@ struct mxs_lcdif_regs {
 	mxs_reg_32(hw_lcdif_data)		/* 0x1b0/0x180 */
 	mxs_reg_32(hw_lcdif_bm_error_stat)	/* 0x1c0/0x190 */
 #if defined(CONFIG_MX28) || defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || \
-	defined(CONFIG_MX7)
+	defined(CONFIG_MX7) || defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL)
 	mxs_reg_32(hw_lcdif_crc_stat)		/* 0x1a0 */
 #endif
 	mxs_reg_32(hw_lcdif_lcdif_stat)		/* 0x1d0/0x1b0 */
@@ -64,7 +64,8 @@ struct mxs_lcdif_regs {
 	mxs_reg_32(hw_lcdif_debug0)		/* 0x1f0/0x1d0 */
 	mxs_reg_32(hw_lcdif_debug1)		/* 0x200/0x1e0 */
 	mxs_reg_32(hw_lcdif_debug2)		/* 0x1f0 */
-#if defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || defined(CONFIG_MX7)
+#if defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || defined(CONFIG_MX7) || \
+	defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL)
 	mxs_reg_32(hw_lcdif_thres)
 	mxs_reg_32(hw_lcdif_as_ctrl)
 	mxs_reg_32(hw_lcdif_as_buf)

arch/arm/include/asm/imx-common/sys_proto.h

@@ -36,6 +36,7 @@
 #define is_mx6solo() (is_cpu_type(MXC_CPU_MX6SOLO))
 #define is_mx6ul() (is_cpu_type(MXC_CPU_MX6UL))
 #define is_mx6ull() (is_cpu_type(MXC_CPU_MX6ULL))
+#define is_mx6sll() (is_cpu_type(MXC_CPU_MX6SLL))
 
 u32 get_nr_cpus(void);
 u32 get_cpu_rev(void);

arch/arm/mach-litesom/Kconfig

@@ -0,0 +1,6 @@
+config LITESOM
+	bool
+	select MX6UL
+	select DM
+	select DM_THERMAL
+	select SUPPORT_SPL

arch/arm/mach-litesom/Makefile

@@ -0,0 +1,6 @@
+# (C) Copyright 2016 Grinn
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y  := litesom.o

arch/arm/mach-litesom/include/mach/litesom.h

@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2016 Grinn
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __ARCH_ARM_MACH_LITESOM_SOM_H__
+#define __ARCH_ARM_MACH_LITESOM_SOM_H__
+
+int litesom_mmc_init(bd_t *bis);
+
+#ifdef CONFIG_SPL_BUILD
+void litesom_init_f(void);
+#endif
+
+#endif

arch/arm/mach-litesom/litesom.c

@@ -0,0 +1,200 @@
+/*
+ * Copyright (C) 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright (C) 2016 Grinn
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <asm/arch/clock.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/mx6ul_pins.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/boot_mode.h>
+#include <asm/io.h>
+#include <common.h>
+#include <fsl_esdhc.h>
+#include <linux/sizes.h>
+#include <mmc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE |		\
+	PAD_CTL_PUS_22K_UP  | PAD_CTL_SPEED_LOW |		\
+	PAD_CTL_DSE_80ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
+
+int dram_init(void)
+{
+	gd->ram_size = imx_ddr_size();
+
+	return 0;
+}
+
+static iomux_v3_cfg_t const emmc_pads[] = {
+	MX6_PAD_NAND_RE_B__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NAND_WE_B__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NAND_DATA00__USDHC2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NAND_DATA01__USDHC2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NAND_DATA02__USDHC2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NAND_DATA03__USDHC2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NAND_DATA04__USDHC2_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NAND_DATA05__USDHC2_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NAND_DATA06__USDHC2_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NAND_DATA07__USDHC2_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+
+	/* RST_B */
+	MX6_PAD_NAND_ALE__GPIO4_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+#ifdef CONFIG_FSL_ESDHC
+static struct fsl_esdhc_cfg emmc_cfg = {USDHC2_BASE_ADDR, 0, 8};
+
+#define EMMC_PWR_GPIO	IMX_GPIO_NR(4, 10)
+
+int litesom_mmc_init(bd_t *bis)
+{
+	int ret;
+
+	/* eMMC */
+	imx_iomux_v3_setup_multiple_pads(emmc_pads, ARRAY_SIZE(emmc_pads));
+	gpio_direction_output(EMMC_PWR_GPIO, 0);
+	udelay(500);
+	gpio_direction_output(EMMC_PWR_GPIO, 1);
+	emmc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+
+	ret = fsl_esdhc_initialize(bis, &emmc_cfg);
+	if (ret) {
+		printf("Warning: failed to initialize mmc dev 1 (eMMC)\n");
+		return ret;
+	}
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_SPL_BUILD
+#include <libfdt.h>
+#include <spl.h>
+#include <asm/arch/mx6-ddr.h>
+
+
+static struct mx6ul_iomux_grp_regs mx6_grp_ioregs = {
+	.grp_addds = 0x00000030,
+	.grp_ddrmode_ctl = 0x00020000,
+	.grp_b0ds = 0x00000030,
+	.grp_ctlds = 0x00000030,
+	.grp_b1ds = 0x00000030,
+	.grp_ddrpke = 0x00000000,
+	.grp_ddrmode = 0x00020000,
+	.grp_ddr_type = 0x000c0000,
+};
+
+static struct mx6ul_iomux_ddr_regs mx6_ddr_ioregs = {
+	.dram_dqm0 = 0x00000030,
+	.dram_dqm1 = 0x00000030,
+	.dram_ras = 0x00000030,
+	.dram_cas = 0x00000030,
+	.dram_odt0 = 0x00000030,
+	.dram_odt1 = 0x00000030,
+	.dram_sdba2 = 0x00000000,
+	.dram_sdclk_0 = 0x00000030,
+	.dram_sdqs0 = 0x00000030,
+	.dram_sdqs1 = 0x00000030,
+	.dram_reset = 0x00000030,
+};
+
+static struct mx6_mmdc_calibration mx6_mmcd_calib = {
+	.p0_mpwldectrl0 = 0x00000000,
+	.p0_mpdgctrl0 = 0x41570155,
+	.p0_mprddlctl = 0x4040474A,
+	.p0_mpwrdlctl = 0x40405550,
+};
+
+struct mx6_ddr_sysinfo ddr_sysinfo = {
+	.dsize = 0,
+	.cs_density = 20,
+	.ncs = 1,
+	.cs1_mirror = 0,
+	.rtt_wr = 2,
+	.rtt_nom = 1,		/* RTT_Nom = RZQ/2 */
+	.walat = 0,		/* Write additional latency */
+	.ralat = 5,		/* Read additional latency */
+	.mif3_mode = 3,		/* Command prediction working mode */
+	.bi_on = 1,		/* Bank interleaving enabled */
+	.sde_to_rst = 0x10,	/* 14 cycles, 200us (JEDEC default) */
+	.rst_to_cke = 0x23,	/* 33 cycles, 500us (JEDEC default) */
+	.ddr_type = DDR_TYPE_DDR3,
+	.refsel = 0,		/* Refresh cycles at 64KHz */
+	.refr = 1,		/* 2 refresh commands per refresh cycle */
+};
+
+static struct mx6_ddr3_cfg mem_ddr = {
+	.mem_speed = 800,
+	.density = 4,
+	.width = 16,
+	.banks = 8,
+	.rowaddr = 15,
+	.coladdr = 10,
+	.pagesz = 2,
+	.trcd = 1375,
+	.trcmin = 4875,
+	.trasmin = 3500,
+};
+
+static void ccgr_init(void)
+{
+	struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+	writel(0xFFFFFFFF, &ccm->CCGR0);
+	writel(0xFFFFFFFF, &ccm->CCGR1);
+	writel(0xFFFFFFFF, &ccm->CCGR2);
+	writel(0xFFFFFFFF, &ccm->CCGR3);
+	writel(0xFFFFFFFF, &ccm->CCGR4);
+	writel(0xFFFFFFFF, &ccm->CCGR5);
+	writel(0xFFFFFFFF, &ccm->CCGR6);
+	writel(0xFFFFFFFF, &ccm->CCGR7);
+}
+
+static void spl_dram_init(void)
+{
+	unsigned long ram_size;
+
+	mx6ul_dram_iocfg(mem_ddr.width, &mx6_ddr_ioregs, &mx6_grp_ioregs);
+	mx6_dram_cfg(&ddr_sysinfo, &mx6_mmcd_calib, &mem_ddr);
+
+	/*
+	 * Get actual RAM size, so we can adjust DDR row size for <512M
+	 * memories
+	 */
+	ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, SZ_512M);
+	if (ram_size < SZ_512M) {
+		mem_ddr.rowaddr = 14;
+		mx6_dram_cfg(&ddr_sysinfo, &mx6_mmcd_calib, &mem_ddr);
+	}
+}
+
+void litesom_init_f(void)
+{
+	ccgr_init();
+
+	/* setup AIPS and disable watchdog */
+	arch_cpu_init();
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+	board_early_init_f();
+#endif
+
+	/* setup GP timer */
+	timer_init();
+
+	/* UART clocks enabled and gd valid - init serial console */
+	preloader_console_init();
+
+	/* DDR initialization */
+	spl_dram_init();
+}
+#endif

board/beckhoff/mx53cx9020/Kconfig

@@ -0,0 +1,12 @@
+if TARGET_MX53CX9020
+
+config SYS_BOARD
+	default "mx53cx9020"
+
+config SYS_VENDOR
+	default "beckhoff"
+
+config SYS_CONFIG_NAME
+	default "mx53cx9020"
+
+endif

board/beckhoff/mx53cx9020/MAINTAINERS

@@ -0,0 +1,6 @@
+MX53 CX9020
+M:	Patrick Bruenn <p.bruenn@beckhoff.com>
+S:	Maintained
+F:	board/beckhoff/mx53cx9020/
+F:	include/configs/mx53cx9020.h
+F:	configs/mx53cx9020_defconfig

board/beckhoff/mx53cx9020/Makefile

@@ -0,0 +1,9 @@
+#
+# Copyright (C) 2015  Beckhoff Automation GmbH & Co. KG
+# Patrick Bruenn <p.bruenn@beckhoff.com>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y               += mx53cx9020.o
+obj-$(CONFIG_VIDEO) += mx53cx9020_video.o

board/beckhoff/mx53cx9020/imximage.cfg

@@ -0,0 +1,82 @@
+/*
+ * Copyright (C) 2015  Beckhoff Automation GmbH
+ * Patrick Bruenn <p.bruenn@beckhoff.com>
+ *
+ * Based on <u-boot>/board/freescale/mx53loco/imximage.cfg
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/* image version */
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
+BOOT_FROM	sd
+
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type           Address        Value
+ *
+ * where:
+ *	Addr-type register length (1,2 or 4 bytes)
+ *	Address	  absolute address of the register
+ *	value	  value to be stored in the register
+ */
+DATA 4 0x53fa8554 0x00300000
+DATA 4 0x53fa8558 0x00300040
+DATA 4 0x53fa8560 0x00300000
+DATA 4 0x53fa8564 0x00300040
+DATA 4 0x53fa8568 0x00300040
+DATA 4 0x53fa8570 0x00300000
+DATA 4 0x53fa8574 0x00300000
+DATA 4 0x53fa8578 0x00300000
+DATA 4 0x53fa857c 0x00300040
+DATA 4 0x53fa8580 0x00300040
+DATA 4 0x53fa8584 0x00300000
+DATA 4 0x53fa8588 0x00300000
+DATA 4 0x53fa8590 0x00300040
+DATA 4 0x53fa8594 0x00300000
+DATA 4 0x53fa86f0 0x00300000
+DATA 4 0x53fa86f4 0x00000000
+DATA 4 0x53fa86fc 0x00000000
+DATA 4 0x53fa8714 0x00000000
+DATA 4 0x53fa8718 0x00300000
+DATA 4 0x53fa871c 0x00300000
+DATA 4 0x53fa8720 0x00300000
+DATA 4 0x53fa8724 0x00000000
+DATA 4 0x53fa8728 0x00300000
+DATA 4 0x53fa872c 0x00300000
+DATA 4 0x63fd9088 0x35343535
+DATA 4 0x63fd9090 0x4d444c44
+DATA 4 0x63fd907c 0x01370138
+DATA 4 0x63fd9080 0x013b013c
+DATA 4 0x63fd9018 0x00011740
+DATA 4 0x63fd9000 0x83190000
+DATA 4 0x63fd900c 0x40425333
+DATA 4 0x63fd9010 0xb68e8a63
+DATA 4 0x63fd9014 0x01ff00db
+DATA 4 0x63fd902c 0x000026d2
+DATA 4 0x63fd9030 0x009f0e21
+DATA 4 0x63fd9008 0x12273030
+DATA 4 0x63fd9004 0x0002002d
+DATA 4 0x63fd901c 0x00008032
+DATA 4 0x63fd901c 0x00008033
+DATA 4 0x63fd901c 0x00028031
+DATA 4 0x63fd901c 0x052080b0
+DATA 4 0x63fd901c 0x04008040
+DATA 4 0x63fd9000 0xc3190000
+DATA 4 0x63fd901c 0x0000803a
+DATA 4 0x63fd901c 0x0000803b
+DATA 4 0x63fd901c 0x00028039
+DATA 4 0x63fd901c 0x05208138
+DATA 4 0x63fd901c 0x04008048
+DATA 4 0x63fd9020 0x00005800
+DATA 4 0x63fd9040 0x05380003
+DATA 4 0x63fd9058 0x00022227
+DATA 4 0x63fd901c 0x00000000

board/beckhoff/mx53cx9020/mx53cx9020.c

@@ -0,0 +1,367 @@
+/*
+ * Copyright (C) 2015  Beckhoff Automation GmbH & Co. KG
+ * Patrick Bruenn <p.bruenn@beckhoff.com>
+ *
+ * Based on <u-boot>/board/freescale/mx53loco/mx53loco.c
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/iomux-mx53.h>
+#include <asm/arch/clock.h>
+#include <asm/imx-common/mx5_video.h>
+#include <ACEX1K.h>
+#include <netdev.h>
+#include <i2c.h>
+#include <mmc.h>
+#include <fsl_esdhc.h>
+#include <asm/gpio.h>
+#include <linux/fb.h>
+#include <ipu_pixfmt.h>
+#include <fs.h>
+#include <dm/platdata.h>
+#include <dm/platform_data/serial_mxc.h>
+
+enum LED_GPIOS {
+	GPIO_SD1_CD = IMX_GPIO_NR(1, 1),
+	GPIO_SD2_CD = IMX_GPIO_NR(1, 4),
+	GPIO_LED_SD2_R = IMX_GPIO_NR(3, 16),
+	GPIO_LED_SD2_B = IMX_GPIO_NR(3, 17),
+	GPIO_LED_SD2_G = IMX_GPIO_NR(3, 18),
+	GPIO_LED_SD1_R = IMX_GPIO_NR(3, 19),
+	GPIO_LED_SD1_B = IMX_GPIO_NR(3, 20),
+	GPIO_LED_SD1_G = IMX_GPIO_NR(3, 21),
+	GPIO_LED_PWR_R = IMX_GPIO_NR(3, 22),
+	GPIO_LED_PWR_B = IMX_GPIO_NR(3, 23),
+	GPIO_LED_PWR_G = IMX_GPIO_NR(3, 24),
+	GPIO_SUPS_INT = IMX_GPIO_NR(3, 31),
+	GPIO_C3_CONFIG = IMX_GPIO_NR(6, 8),
+	GPIO_C3_STATUS = IMX_GPIO_NR(6, 7),
+	GPIO_C3_DONE = IMX_GPIO_NR(6, 9),
+};
+
+#define CCAT_BASE_ADDR ((void *)0xf0000000)
+#define CCAT_END_ADDR (CCAT_BASE_ADDR + (1024 * 1024 * 32))
+#define CCAT_SIZE 1191788
+#define CCAT_SIGN_ADDR (CCAT_BASE_ADDR + 12)
+static const char CCAT_SIGNATURE[] = "CCAT";
+
+static const u32 CCAT_MODE_CONFIG = 0x0024DC81;
+static const u32 CCAT_MODE_RUN = 0x0033DC8F;
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static uint32_t mx53_dram_size[2];
+
+phys_size_t get_effective_memsize(void)
+{
+	/*
+	 * WARNING: We must override get_effective_memsize() function here
+	 * to report only the size of the first DRAM bank. This is to make
+	 * U-Boot relocator place U-Boot into valid memory, that is, at the
+	 * end of the first DRAM bank. If we did not override this function
+	 * like so, U-Boot would be placed at the address of the first DRAM
+	 * bank + total DRAM size - sizeof(uboot), which in the setup where
+	 * each DRAM bank contains 512MiB of DRAM would result in placing
+	 * U-Boot into invalid memory area close to the end of the first
+	 * DRAM bank.
+	 */
+	return mx53_dram_size[0];
+}
+
+int dram_init(void)
+{
+	mx53_dram_size[0] = get_ram_size((void *)PHYS_SDRAM_1, 1 << 30);
+	mx53_dram_size[1] = get_ram_size((void *)PHYS_SDRAM_2, 1 << 30);
+
+	gd->ram_size = mx53_dram_size[0] + mx53_dram_size[1];
+
+	return 0;
+}
+
+void dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = mx53_dram_size[0];
+
+	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+	gd->bd->bi_dram[1].size = mx53_dram_size[1];
+}
+
+u32 get_board_rev(void)
+{
+	struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
+	struct fuse_bank *bank = &iim->bank[0];
+	struct fuse_bank0_regs *fuse =
+	    (struct fuse_bank0_regs *)bank->fuse_regs;
+
+	int rev = readl(&fuse->gp[6]);
+
+	return (get_cpu_rev() & ~(0xF << 8)) | (rev & 0xF) << 8;
+}
+
+/*
+ * Set CCAT mode
+ * @mode: use CCAT_MODE_CONFIG or CCAT_MODE_RUN
+ */
+void weim_cs0_settings(u32 mode)
+{
+	struct weim *weim_regs = (struct weim *)WEIM_BASE_ADDR;
+
+	writel(0x0, &weim_regs->cs0gcr1);
+	writel(mode, &weim_regs->cs0gcr1);
+	writel(0x00001002, &weim_regs->cs0gcr2);
+
+	writel(0x04000000, &weim_regs->cs0rcr1);
+	writel(0x00000000, &weim_regs->cs0rcr2);
+
+	writel(0x04000000, &weim_regs->cs0wcr1);
+	writel(0x00000000, &weim_regs->cs0wcr2);
+}
+
+static void setup_gpio_eim(void)
+{
+	gpio_direction_input(GPIO_C3_STATUS);
+	gpio_direction_input(GPIO_C3_DONE);
+	gpio_direction_output(GPIO_C3_CONFIG, 1);
+
+	weim_cs0_settings(CCAT_MODE_RUN);
+}
+
+static void setup_gpio_sups(void)
+{
+	gpio_direction_input(GPIO_SUPS_INT);
+
+	static const int BLINK_INTERVALL = 50000;
+	int status = 1;
+	while (gpio_get_value(GPIO_SUPS_INT)) {
+		/* signal "CX SUPS power fail" */
+		gpio_set_value(GPIO_LED_PWR_R,
+			       (++status / BLINK_INTERVALL) % 2);
+	}
+
+	/* signal "CX power up" */
+	gpio_set_value(GPIO_LED_PWR_R, 1);
+}
+
+static void setup_gpio_leds(void)
+{
+	gpio_direction_output(GPIO_LED_SD2_R, 0);
+	gpio_direction_output(GPIO_LED_SD2_B, 0);
+	gpio_direction_output(GPIO_LED_SD2_G, 0);
+	gpio_direction_output(GPIO_LED_SD1_R, 0);
+	gpio_direction_output(GPIO_LED_SD1_B, 0);
+	gpio_direction_output(GPIO_LED_SD1_G, 0);
+	gpio_direction_output(GPIO_LED_PWR_R, 0);
+	gpio_direction_output(GPIO_LED_PWR_B, 0);
+	gpio_direction_output(GPIO_LED_PWR_G, 0);
+}
+
+#ifdef CONFIG_USB_EHCI_MX5
+int board_ehci_hcd_init(int port)
+{
+	/* request VBUS power enable pin, GPIO7_8 */
+	gpio_direction_output(IMX_GPIO_NR(7, 8), 1);
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_FSL_ESDHC
+struct fsl_esdhc_cfg esdhc_cfg[2] = {
+	{MMC_SDHC1_BASE_ADDR},
+	{MMC_SDHC2_BASE_ADDR},
+};
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+	int ret;
+
+	gpio_direction_input(GPIO_SD1_CD);
+	gpio_direction_input(GPIO_SD2_CD);
+
+	if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
+		ret = !gpio_get_value(GPIO_SD1_CD);
+	else
+		ret = !gpio_get_value(GPIO_SD2_CD);
+
+	return ret;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+	u32 index;
+	int ret;
+
+	esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+	esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+
+	for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) {
+		switch (index) {
+		case 0:
+			break;
+		case 1:
+			break;
+		default:
+			printf("Warning: you configured more ESDHC controller(%d) as supported by the board(2)\n",
+			       CONFIG_SYS_FSL_ESDHC_NUM);
+			return -EINVAL;
+		}
+		ret = fsl_esdhc_initialize(bis, &esdhc_cfg[index]);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+#endif
+
+static int power_init(void)
+{
+	/* nothing to do on CX9020 */
+	return 0;
+}
+
+static void clock_1GHz(void)
+{
+	int ret;
+	u32 ref_clk = MXC_HCLK;
+	/*
+	 * After increasing voltage to 1.25V, we can switch
+	 * CPU clock to 1GHz and DDR to 400MHz safely
+	 */
+	ret = mxc_set_clock(ref_clk, 1000, MXC_ARM_CLK);
+	if (ret)
+		printf("CPU:   Switch CPU clock to 1GHZ failed\n");
+
+	ret = mxc_set_clock(ref_clk, 400, MXC_PERIPH_CLK);
+	ret |= mxc_set_clock(ref_clk, 400, MXC_DDR_CLK);
+	if (ret)
+		printf("CPU:   Switch DDR clock to 400MHz failed\n");
+}
+
+int board_early_init_f(void)
+{
+	setup_gpio_leds();
+	setup_gpio_sups();
+	setup_gpio_eim();
+	setup_iomux_lcd();
+
+	return 0;
+}
+
+/*
+ * Do not overwrite the console
+ * Use always serial for U-Boot console
+ */
+int overwrite_console(void)
+{
+	return 1;
+}
+
+int board_init(void)
+{
+	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+	mxc_set_sata_internal_clock();
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	puts("Board: Beckhoff CX9020\n");
+
+	return 0;
+}
+
+static int ccat_config_fn(int assert_config, int flush, int cookie)
+{
+	/* prepare FPGA for programming */
+	weim_cs0_settings(CCAT_MODE_CONFIG);
+	gpio_set_value(GPIO_C3_CONFIG, 0);
+	udelay(1);
+	gpio_set_value(GPIO_C3_CONFIG, 1);
+	udelay(230);
+
+	return FPGA_SUCCESS;
+}
+
+static int ccat_status_fn(int cookie)
+{
+	return FPGA_FAIL;
+}
+
+static int ccat_write_fn(const void *buf, size_t buf_len, int flush, int cookie)
+{
+	const uint8_t *const buffer = buf;
+
+	/* program CCAT */
+	int i;
+	for (i = 0; i < buf_len; ++i)
+		writeb(buffer[i], CCAT_BASE_ADDR);
+
+	writeb(0xff, CCAT_BASE_ADDR);
+	writeb(0xff, CCAT_BASE_ADDR);
+
+	return FPGA_SUCCESS;
+}
+
+static int ccat_done_fn(int cookie)
+{
+	/* programming complete? */
+	return gpio_get_value(GPIO_C3_DONE);
+}
+
+static int ccat_post_fn(int cookie)
+{
+	/* switch to FPGA run mode */
+	weim_cs0_settings(CCAT_MODE_RUN);
+	invalidate_dcache_range((ulong) CCAT_BASE_ADDR, (ulong) CCAT_END_ADDR);
+
+	if (memcmp(CCAT_SIGN_ADDR, CCAT_SIGNATURE, sizeof(CCAT_SIGNATURE))) {
+		printf("Verifing CCAT firmware failed, signature not found\n");
+		return FPGA_FAIL;
+	}
+
+	/* signal "CX booting OS" */
+	gpio_set_value(GPIO_LED_PWR_R, 1);
+	gpio_set_value(GPIO_LED_PWR_G, 1);
+	gpio_set_value(GPIO_LED_PWR_B, 0);
+	return FPGA_SUCCESS;
+}
+
+static Altera_CYC2_Passive_Serial_fns ccat_fns = {
+	.config = ccat_config_fn,
+	.status = ccat_status_fn,
+	.done = ccat_done_fn,
+	.write = ccat_write_fn,
+	.abort = ccat_post_fn,
+	.post = ccat_post_fn,
+};
+
+static Altera_desc ccat_fpga = {
+	.family = Altera_CYC2,
+	.iface = passive_serial,
+	.size = CCAT_SIZE,
+	.iface_fns = &ccat_fns,
+	.base = CCAT_BASE_ADDR,
+};
+
+int board_late_init(void)
+{
+	if (!power_init())
+		clock_1GHz();
+
+	fpga_init();
+	fpga_add(fpga_altera, &ccat_fpga);
+
+	return 0;
+}

board/beckhoff/mx53cx9020/mx53cx9020_video.c

@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2015  Beckhoff Automation GmbH & Co. KG
+ * Patrick Bruenn <p.bruenn@beckhoff.com>
+ *
+ * Based on <u-boot>/board/freescale/mx53loco/mx53loco_video.c
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <linux/list.h>
+#include <asm/gpio.h>
+#include <asm/arch/iomux-mx53.h>
+#include <linux/fb.h>
+#include <ipu_pixfmt.h>
+
+#define CX9020_DVI_PWD	IMX_GPIO_NR(6, 1)
+
+static struct fb_videomode const vga_640x480 = {
+	.name = "VESA_VGA_640x480",
+	.refresh = 60,
+	.xres = 640,
+	.yres = 480,
+	.pixclock = 39721,	/* picosecond (25.175 MHz) */
+	.left_margin = 40,
+	.right_margin = 60,
+	.upper_margin = 10,
+	.lower_margin = 10,
+	.hsync_len = 20,
+	.vsync_len = 10,
+	.sync = 0,
+	.vmode = FB_VMODE_NONINTERLACED
+};
+
+void setup_iomux_lcd(void)
+{
+	/* Turn on DVI_PWD */
+	imx_iomux_v3_setup_pad(MX53_PAD_CSI0_DAT15__GPIO6_1);
+	gpio_direction_output(CX9020_DVI_PWD, 1);
+}
+
+int board_video_skip(void)
+{
+	const int ret = ipuv3_fb_init(&vga_640x480, 0, IPU_PIX_FMT_RGB24);
+	if (ret)
+		printf("VESA VG 640x480 cannot be configured: %d\n", ret);
+	return ret;
+}

board/engicam/geam6ul/Kconfig

@@ -0,0 +1,12 @@
+if TARGET_MX6UL_GEAM
+
+config SYS_BOARD
+	default "geam6ul"
+
+config SYS_VENDOR
+	default "engicam"
+
+config SYS_CONFIG_NAME
+	default "imx6ul_geam"
+
+endif

board/engicam/geam6ul/MAINTAINERS

@@ -0,0 +1,6 @@
+GEAM6UL BOARD
+M:	Jagan Teki <jagan@amarulasolutions.com>
+S:	Maintained
+F:	board/engicam/geam6ul
+F:	include/configs/imx6ul_geam.h
+F:	configs/imx6ul_geam_mmc_defconfig

board/engicam/geam6ul/Makefile

@@ -0,0 +1,6 @@
+# Copyright (C) 2016 Amarula Solutions B.V.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y  := geam6ul.o

board/engicam/geam6ul/README

@@ -0,0 +1,28 @@
+How to use U-Boot on Engicam GEAM6UL Starter Kit:
+-------------------------------------------------
+
+- Configure U-Boot for Engicam GEAM6UL:
+
+$ make mrproper
+$ make imx6ul_geam_mmc_defconfig
+$ make
+
+This will generate the SPL image called SPL and the u-boot-dtb.img.
+
+- Flash the SPL image into the micro SD card:
+
+sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
+
+- Flash the u-boot-dtb.img image into the micro SD card:
+
+sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 bs=1k seek=69; sync
+
+- Jumper settings:
+
+MMC Boot: JM3 Closed
+
+- Connect the Serial cable between the Starter Kit and the PC for the console.
+(J28 is the Linux Serial console connector)
+
+- Insert the micro SD card in the board, power it up and U-Boot messages should
+come up.

board/engicam/geam6ul/geam6ul.c

@@ -0,0 +1,317 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <linux/sizes.h>
+
+#include <asm/arch/clock.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/imx-common/iomux-v3.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL  (PAD_CTL_PKE | PAD_CTL_PUE |		\
+	PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |		\
+	PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
+
+static iomux_v3_cfg_t const uart1_pads[] = {
+	MX6_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
+	MX6_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+int board_early_init_f(void)
+{
+	imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
+
+	return 0;
+}
+
+#ifdef CONFIG_NAND_MXS
+
+#define GPMI_PAD_CTRL0		(PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
+#define GPMI_PAD_CTRL1		(PAD_CTL_DSE_40ohm | PAD_CTL_SPEED_MED | \
+				PAD_CTL_SRE_FAST)
+#define GPMI_PAD_CTRL2		(GPMI_PAD_CTRL0 | GPMI_PAD_CTRL1)
+
+static iomux_v3_cfg_t const nand_pads[] = {
+	MX6_PAD_NAND_DATA00__RAWNAND_DATA00 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+	MX6_PAD_NAND_DATA01__RAWNAND_DATA01 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+	MX6_PAD_NAND_DATA02__RAWNAND_DATA02 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+	MX6_PAD_NAND_DATA03__RAWNAND_DATA03 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+	MX6_PAD_NAND_DATA04__RAWNAND_DATA04 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+	MX6_PAD_NAND_DATA05__RAWNAND_DATA05 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+	MX6_PAD_NAND_DATA06__RAWNAND_DATA06 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+	MX6_PAD_NAND_DATA07__RAWNAND_DATA07 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+	MX6_PAD_NAND_CLE__RAWNAND_CLE | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+	MX6_PAD_NAND_ALE__RAWNAND_ALE | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+	MX6_PAD_NAND_CE0_B__RAWNAND_CE0_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+	MX6_PAD_NAND_RE_B__RAWNAND_RE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+	MX6_PAD_NAND_WE_B__RAWNAND_WE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+	MX6_PAD_NAND_WP_B__RAWNAND_WP_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+	MX6_PAD_NAND_READY_B__RAWNAND_READY_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+};
+
+static void setup_gpmi_nand(void)
+{
+	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+	/* config gpmi nand iomux */
+	imx_iomux_v3_setup_multiple_pads(nand_pads, ARRAY_SIZE(nand_pads));
+
+	clrbits_le32(&mxc_ccm->CCGR4,
+		     MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
+		     MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
+		     MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
+		     MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
+		     MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK);
+
+	/*
+	 * config gpmi and bch clock to 100 MHz
+	 * bch/gpmi select PLL2 PFD2 400M
+	 * 100M = 400M / 4
+	 */
+	clrbits_le32(&mxc_ccm->cscmr1,
+		     MXC_CCM_CSCMR1_BCH_CLK_SEL |
+		     MXC_CCM_CSCMR1_GPMI_CLK_SEL);
+	clrsetbits_le32(&mxc_ccm->cscdr1,
+			MXC_CCM_CSCDR1_BCH_PODF_MASK |
+			MXC_CCM_CSCDR1_GPMI_PODF_MASK,
+			(3 << MXC_CCM_CSCDR1_BCH_PODF_OFFSET) |
+			(3 << MXC_CCM_CSCDR1_GPMI_PODF_OFFSET));
+
+	/* enable gpmi and bch clock gating */
+	setbits_le32(&mxc_ccm->CCGR4,
+		     MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
+		     MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
+		     MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
+		     MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
+		     MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK);
+
+	/* enable apbh clock gating */
+	setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK);
+}
+#endif /* CONFIG_NAND_MXS */
+
+int board_init(void)
+{
+	/* Address of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+#ifdef CONFIG_NAND_MXS
+	setup_gpmi_nand();
+#endif
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->ram_size = imx_ddr_size();
+
+	return 0;
+}
+
+#ifdef CONFIG_SPL_BUILD
+#include <libfdt.h>
+#include <spl.h>
+
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/mx6-ddr.h>
+
+/* MMC board initialization is needed till adding DM support in SPL */
+#if defined(CONFIG_FSL_ESDHC) && !defined(CONFIG_DM_MMC)
+#include <mmc.h>
+#include <fsl_esdhc.h>
+
+#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE |             \
+	PAD_CTL_PUS_22K_UP  | PAD_CTL_SPEED_LOW |               \
+	PAD_CTL_DSE_80ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
+
+static iomux_v3_cfg_t const usdhc1_pads[] = {
+	MX6_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD1_DATA0__USDHC1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD1_DATA1__USDHC1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD1_DATA2__USDHC1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD1_DATA3__USDHC1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+
+	/* VSELECT */
+	MX6_PAD_GPIO1_IO05__USDHC1_VSELECT | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	/* CD */
+	MX6_PAD_UART1_RTS_B__GPIO1_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	/* RST_B */
+	MX6_PAD_GPIO1_IO09__GPIO1_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+#define USDHC1_CD_GPIO	IMX_GPIO_NR(1, 1)
+
+struct fsl_esdhc_cfg usdhc_cfg[1] = {
+	{USDHC1_BASE_ADDR, 0, 4},
+};
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+	int ret = 0;
+
+	switch (cfg->esdhc_base) {
+	case USDHC1_BASE_ADDR:
+		ret = !gpio_get_value(USDHC1_CD_GPIO);
+		break;
+	}
+
+	return ret;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+	int i, ret;
+
+	/*
+	* According to the board_mmc_init() the following map is done:
+	* (U-boot device node)    (Physical Port)
+	* mmc0				USDHC1
+	*/
+	for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
+		switch (i) {
+		case 0:
+			imx_iomux_v3_setup_multiple_pads(
+				usdhc1_pads, ARRAY_SIZE(usdhc1_pads));
+			gpio_direction_input(USDHC1_CD_GPIO);
+			usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+			break;
+		default:
+			printf("Warning - USDHC%d controller not supporting\n",
+			       i + 1);
+			return 0;
+		}
+
+		ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
+		if (ret) {
+			printf("Warning: failed to initialize mmc dev %d\n", i);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+#endif /* CONFIG_FSL_ESDHC */
+
+static struct mx6ul_iomux_grp_regs mx6_grp_ioregs = {
+	.grp_addds = 0x00000030,
+	.grp_ddrmode_ctl = 0x00020000,
+	.grp_b0ds = 0x00000030,
+	.grp_ctlds = 0x00000030,
+	.grp_b1ds = 0x00000030,
+	.grp_ddrpke = 0x00000000,
+	.grp_ddrmode = 0x00020000,
+	.grp_ddr_type = 0x000c0000,
+};
+
+static struct mx6ul_iomux_ddr_regs mx6_ddr_ioregs = {
+	.dram_dqm0 = 0x00000030,
+	.dram_dqm1 = 0x00000030,
+	.dram_ras = 0x00000030,
+	.dram_cas = 0x00000030,
+	.dram_odt0 = 0x00000030,
+	.dram_odt1 = 0x00000030,
+	.dram_sdba2 = 0x00000000,
+	.dram_sdclk_0 = 0x00000008,
+	.dram_sdqs0 = 0x00000038,
+	.dram_sdqs1 = 0x00000030,
+	.dram_reset = 0x00000030,
+};
+
+static struct mx6_mmdc_calibration mx6_mmcd_calib = {
+	.p0_mpwldectrl0 = 0x00070007,
+	.p0_mpdgctrl0 = 0x41490145,
+	.p0_mprddlctl = 0x40404546,
+	.p0_mpwrdlctl = 0x4040524D,
+};
+
+struct mx6_ddr_sysinfo ddr_sysinfo = {
+	.dsize = 0,
+	.cs_density = 20,
+	.ncs = 1,
+	.cs1_mirror = 0,
+	.rtt_wr = 2,
+	.rtt_nom = 1,		/* RTT_Nom = RZQ/2 */
+	.walat = 1,		/* Write additional latency */
+	.ralat = 5,		/* Read additional latency */
+	.mif3_mode = 3,		/* Command prediction working mode */
+	.bi_on = 1,		/* Bank interleaving enabled */
+	.sde_to_rst = 0x10,	/* 14 cycles, 200us (JEDEC default) */
+	.rst_to_cke = 0x23,	/* 33 cycles, 500us (JEDEC default) */
+	.ddr_type = DDR_TYPE_DDR3,
+};
+
+static struct mx6_ddr3_cfg mem_ddr = {
+	.mem_speed = 800,
+	.density = 4,
+	.width = 16,
+	.banks = 8,
+	.rowaddr = 13,
+	.coladdr = 10,
+	.pagesz = 2,
+	.trcd = 1375,
+	.trcmin = 4875,
+	.trasmin = 3500,
+};
+
+static void ccgr_init(void)
+{
+	struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+	writel(0xFFFFFFFF, &ccm->CCGR0);
+	writel(0xFFFFFFFF, &ccm->CCGR1);
+	writel(0xFFFFFFFF, &ccm->CCGR2);
+	writel(0xFFFFFFFF, &ccm->CCGR3);
+	writel(0xFFFFFFFF, &ccm->CCGR4);
+	writel(0xFFFFFFFF, &ccm->CCGR5);
+	writel(0xFFFFFFFF, &ccm->CCGR6);
+	writel(0xFFFFFFFF, &ccm->CCGR7);
+}
+
+static void spl_dram_init(void)
+{
+	mx6ul_dram_iocfg(mem_ddr.width, &mx6_ddr_ioregs, &mx6_grp_ioregs);
+	mx6_dram_cfg(&ddr_sysinfo, &mx6_mmcd_calib, &mem_ddr);
+}
+
+void board_init_f(ulong dummy)
+{
+	/* setup AIPS and disable watchdog */
+	arch_cpu_init();
+
+	ccgr_init();
+
+	/* iomux and setup of i2c */
+	board_early_init_f();
+
+	/* setup GP timer */
+	timer_init();
+
+	/* UART clocks enabled and gd valid - init serial console */
+	preloader_console_init();
+
+	/* DDR initialization */
+	spl_dram_init();
+
+	/* Clear the BSS. */
+	memset(__bss_start, 0, __bss_end - __bss_start);
+
+	/* load/boot image from boot device */
+	board_init_r(NULL, 0);
+}
+#endif /* CONFIG_SPL_BUILD */

board/engicam/icorem6/MAINTAINERS

@@ -3,5 +3,7 @@ M:	Jagan Teki <jagan@amarulasolutions.com>
 S:	Maintained
 F:	board/engicam/icorem6
 F:	include/configs/imx6qdl_icore.h
-F:	configs/imx6qdl_icore_mmc_defconfig
+F:	configs/imx6q_icore_mmc_defconfig
-F:	configs/imx6qdl_icore_nand_defconfig
+F:	configs/imx6q_icore_nand_defconfig
+F:	configs/imx6dl_icore_mmc_defconfig
+F:	configs/imx6dl_icore_nand_defconfig

board/engicam/icorem6/README

@@ -1,19 +1,17 @@
-How to use U-Boot on Engicam i.CoreM6 DualLite/Solo and Quad/Dual Starter Kit:
+How to use U-Boot on Engicam i.CoreM6 Solo/DualLite and Quad/Dual Starter Kit:
 -----------------------------------------------------------------------------
 
-- Configure U-Boot for Engicam i.CoreM6 QDL:
-
 $ make mrproper
-$ make imx6qdl_icore_mmc_defconfig
 
-- Build for i.CoreM6 DualLite/Solo
+- Configure U-Boot for Engicam i.CoreM6 Quad/Dual:
+$ make imx6q_icore_mmc_defconfig
 
+- Configure U-Boot for Engicam i.CoreM6 Solo/DualLite:
+$ make imx6dl_icore_mmc_defconfig
+
+- Build U-Boot
 $ make
 
-- Build for i.CoreM6 Quad/Dual
-
-$ make DEVICE_TREE=imx6q-icore
-
 This will generate the SPL image called SPL and the u-boot-dtb.img.
 
 - Flash the SPL image into the micro SD card:
@@ -33,6 +31,3 @@ MMC Boot: JM3 Closed
 
 - Insert the micro SD card in the board, power it up and U-Boot messages should
 come up.
-
-- Note: For loading Linux on Quad/Dual modules set the dtb as
-  icorem6qdl> setenv fdt_file imx6q-icore.dtb

board/engicam/icorem6/icorem6.c

@@ -7,8 +7,6 @@
  */
 
 #include <common.h>
-#include <miiphy.h>
-#include <netdev.h>
 
 #include <asm/io.h>
 #include <asm/gpio.h>
@@ -20,6 +18,7 @@
 #include <asm/arch/mx6-pins.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/video.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -27,80 +26,11 @@ DECLARE_GLOBAL_DATA_PTR;
 	PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |		\
 	PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
 
-#define ENET_PAD_CTRL  (PAD_CTL_PKE | PAD_CTL_PUE |		\
-	PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED   |		\
-	PAD_CTL_DSE_40ohm   | PAD_CTL_HYS)
-
 static iomux_v3_cfg_t const uart4_pads[] = {
 	IOMUX_PADS(PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
 	IOMUX_PADS(PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
 };
 
-static iomux_v3_cfg_t const enet_pads[] = {
-	IOMUX_PADS(PAD_ENET_CRS_DV__ENET_RX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL)),
-	IOMUX_PADS(PAD_GPIO_16__ENET_REF_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL | PAD_CTL_SRE_FAST)),
-	IOMUX_PADS(PAD_ENET_TX_EN__ENET_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL)),
-	IOMUX_PADS(PAD_ENET_RXD1__ENET_RX_DATA1	| MUX_PAD_CTRL(ENET_PAD_CTRL)),
-	IOMUX_PADS(PAD_ENET_RXD0__ENET_RX_DATA0	| MUX_PAD_CTRL(ENET_PAD_CTRL)),
-	IOMUX_PADS(PAD_ENET_TXD1__ENET_TX_DATA1	| MUX_PAD_CTRL(ENET_PAD_CTRL)),
-	IOMUX_PADS(PAD_ENET_TXD0__ENET_TX_DATA0	| MUX_PAD_CTRL(ENET_PAD_CTRL)),
-	IOMUX_PADS(PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
-	IOMUX_PADS(PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL)),
-	IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | MUX_PAD_CTRL(NO_PAD_CTRL)),
-};
-
-#ifdef CONFIG_FEC_MXC
-#define ENET_PHY_RST		IMX_GPIO_NR(7, 12)
-static int setup_fec(void)
-{
-	struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
-	struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
-	s32 timeout = 100000;
-	u32 reg = 0;
-	int ret;
-
-	/* Enable fec clock */
-	setbits_le32(&ccm->CCGR1, MXC_CCM_CCGR1_ENET_MASK);
-
-	/* use 50MHz */
-	ret = enable_fec_anatop_clock(0, ENET_50MHZ);
-	if (ret)
-		return ret;
-
-	/* Enable PLLs */
-	reg = readl(&anatop->pll_enet);
-	reg &= ~BM_ANADIG_PLL_SYS_POWERDOWN;
-	writel(reg, &anatop->pll_enet);
-	reg = readl(&anatop->pll_enet);
-	reg |= BM_ANADIG_PLL_SYS_ENABLE;
-	while (timeout--) {
-		if (readl(&anatop->pll_enet) & BM_ANADIG_PLL_SYS_LOCK)
-			break;
-	}
-	if (timeout <= 0)
-		return -EIO;
-	reg &= ~BM_ANADIG_PLL_SYS_BYPASS;
-	writel(reg, &anatop->pll_enet);
-
-	/* reset the phy */
-	gpio_direction_output(ENET_PHY_RST, 0);
-	udelay(10000);
-	gpio_set_value(ENET_PHY_RST, 1);
-
-	return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
-	int ret;
-
-	SETUP_IOMUX_PADS(enet_pads);
-	setup_fec();
-
-	return ret = cpu_eth_init(bis);
-}
-#endif
-
 #ifdef CONFIG_NAND_MXS
 
 #define GPMI_PAD_CTRL0	(PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
@@ -161,6 +91,113 @@ static void setup_gpmi_nand(void)
 }
 #endif
 
+#if defined(CONFIG_VIDEO_IPUV3)
+static iomux_v3_cfg_t const rgb_pads[] = {
+	IOMUX_PADS(PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK),
+	IOMUX_PADS(PAD_DI0_PIN15__IPU1_DI0_PIN15),
+	IOMUX_PADS(PAD_DI0_PIN2__IPU1_DI0_PIN02),
+	IOMUX_PADS(PAD_DI0_PIN3__IPU1_DI0_PIN03),
+	IOMUX_PADS(PAD_DISP0_DAT0__IPU1_DISP0_DATA00),
+	IOMUX_PADS(PAD_DISP0_DAT1__IPU1_DISP0_DATA01),
+	IOMUX_PADS(PAD_DISP0_DAT2__IPU1_DISP0_DATA02),
+	IOMUX_PADS(PAD_DISP0_DAT3__IPU1_DISP0_DATA03),
+	IOMUX_PADS(PAD_DISP0_DAT4__IPU1_DISP0_DATA04),
+	IOMUX_PADS(PAD_DISP0_DAT5__IPU1_DISP0_DATA05),
+	IOMUX_PADS(PAD_DISP0_DAT6__IPU1_DISP0_DATA06),
+	IOMUX_PADS(PAD_DISP0_DAT7__IPU1_DISP0_DATA07),
+	IOMUX_PADS(PAD_DISP0_DAT8__IPU1_DISP0_DATA08),
+	IOMUX_PADS(PAD_DISP0_DAT9__IPU1_DISP0_DATA09),
+	IOMUX_PADS(PAD_DISP0_DAT10__IPU1_DISP0_DATA10),
+	IOMUX_PADS(PAD_DISP0_DAT11__IPU1_DISP0_DATA11),
+	IOMUX_PADS(PAD_DISP0_DAT12__IPU1_DISP0_DATA12),
+	IOMUX_PADS(PAD_DISP0_DAT13__IPU1_DISP0_DATA13),
+	IOMUX_PADS(PAD_DISP0_DAT14__IPU1_DISP0_DATA14),
+	IOMUX_PADS(PAD_DISP0_DAT15__IPU1_DISP0_DATA15),
+	IOMUX_PADS(PAD_DISP0_DAT16__IPU1_DISP0_DATA16),
+	IOMUX_PADS(PAD_DISP0_DAT17__IPU1_DISP0_DATA17),
+};
+
+static void enable_rgb(struct display_info_t const *dev)
+{
+	SETUP_IOMUX_PADS(rgb_pads);
+}
+
+struct display_info_t const displays[] = {
+	{
+		.bus	= -1,
+		.addr	= 0,
+		.pixfmt	= IPU_PIX_FMT_RGB666,
+		.detect	= NULL,
+		.enable	= enable_rgb,
+		.mode	= {
+			.name           = "Amp-WD",
+			.refresh        = 60,
+			.xres           = 800,
+			.yres           = 480,
+			.pixclock       = 30000,
+			.left_margin    = 30,
+			.right_margin   = 30,
+			.upper_margin   = 5,
+			.lower_margin   = 5,
+			.hsync_len      = 64,
+			.vsync_len      = 20,
+			.sync           = FB_SYNC_EXT,
+			.vmode          = FB_VMODE_NONINTERLACED
+		}
+	},
+};
+
+size_t display_count = ARRAY_SIZE(displays);
+
+static void setup_display(void)
+{
+	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+	struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
+	int reg;
+
+	enable_ipu_clock();
+
+	/* Turn on LDB0,IPU,IPU DI0 clocks */
+	reg = __raw_readl(&mxc_ccm->CCGR3);
+	reg |=  (MXC_CCM_CCGR3_LDB_DI0_MASK | 0xffff);
+	writel(reg, &mxc_ccm->CCGR3);
+
+	/* set LDB0, LDB1 clk select to 011/011 */
+	reg = readl(&mxc_ccm->cs2cdr);
+	reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK |
+		MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
+	reg |= (3 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET) |
+		(3 << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET);
+	writel(reg, &mxc_ccm->cs2cdr);
+
+	reg = readl(&mxc_ccm->cscmr2);
+	reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV;
+	writel(reg, &mxc_ccm->cscmr2);
+
+	reg = readl(&mxc_ccm->chsccdr);
+	reg |= (CHSCCDR_CLK_SEL_LDB_DI0 <<
+		MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
+	writel(reg, &mxc_ccm->chsccdr);
+
+	reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES |
+		IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH |
+		IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW |
+		IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG |
+		IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT |
+		IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG |
+		IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT |
+		IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED |
+		IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0;
+	writel(reg, &iomux->gpr[2]);
+
+	reg = readl(&iomux->gpr[3]);
+	reg = (reg & ~IOMUXC_GPR3_LVDS0_MUX_CTL_MASK) |
+		(IOMUXC_GPR3_MUX_SRC_IPU1_DI0 <<
+		IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET);
+	writel(reg, &iomux->gpr[3]);
+}
+#endif /* CONFIG_VIDEO_IPUV3 */
+
 int board_early_init_f(void)
 {
 	SETUP_IOMUX_PADS(uart4_pads);
@@ -176,6 +213,11 @@ int board_init(void)
 #ifdef CONFIG_NAND_MXS
 	setup_gpmi_nand();
 #endif
+
+#ifdef CONFIG_VIDEO_IPUV3
+	setup_display();
+#endif
+
 	return 0;
 }
 

board/engicam/icorem6_rqs/Kconfig

@@ -0,0 +1,12 @@
+if TARGET_MX6Q_ICORE_RQS
+
+config SYS_BOARD
+	default "icorem6_rqs"
+
+config SYS_VENDOR
+	default "engicam"
+
+config SYS_CONFIG_NAME
+	default "imx6qdl_icore_rqs"
+
+endif

board/engicam/icorem6_rqs/MAINTAINERS

@@ -0,0 +1,7 @@
+ICOREM6QDL_RQS BOARD
+M:	Jagan Teki <jagan@amarulasolutions.com>
+S:	Maintained
+F:	board/engicam/icorem6_rqs
+F:	include/configs/imx6qdl_icore_rqs.h
+F:	configs/imx6q_icore_rqs_mmc_defconfig
+F:	configs/imx6dl_icore_rqs_mmc_defconfig

board/engicam/icorem6_rqs/Makefile

@@ -0,0 +1,6 @@
+# Copyright (C) 2016 Amarula Solutions B.V.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y  := icorem6_rqs.o

board/engicam/icorem6_rqs/README

@@ -0,0 +1,33 @@
+How to use U-Boot on Engicam i.CoreM6 RQS Solo/DualLite and Quad/Dual Starter Kit:
+----------------------------------------------------------------------------------
+
+$ make mrproper
+
+- Configure U-Boot for Engicam i.CoreM6 RQS Quad/Dual:
+$ make imx6q_icore_rqs_mmc_defconfig
+
+- Configure U-Boot for Engicam i.CoreM6 RQS Solo/DualLite:
+$ make imx6dl_icore_rqs_mmc_defconfig
+
+- Build U-Boot
+$ make
+
+This will generate the SPL image called SPL and the u-boot-dtb.img.
+
+- Flash the SPL image into the micro SD card:
+
+sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
+
+- Flash the u-boot-dtb.img image into the micro SD card:
+
+sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 bs=1k seek=69; sync
+
+- Jumper settings:
+
+MMC Boot: JM3 Closed
+
+- Connect the Serial cable between the Starter Kit and the PC for the console.
+(J28 is the Linux Serial console connector)
+
+- Insert the micro SD card in the board, power it up and U-Boot messages should
+come up.

board/engicam/icorem6_rqs/icorem6_rqs.c

@@ -0,0 +1,399 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <linux/sizes.h>
+
+#include <asm/arch/clock.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/imx-common/iomux-v3.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL  (PAD_CTL_PKE | PAD_CTL_PUE |		\
+	PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |		\
+	PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
+
+static iomux_v3_cfg_t const uart4_pads[] = {
+	IOMUX_PADS(PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
+	IOMUX_PADS(PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
+};
+
+int board_early_init_f(void)
+{
+	SETUP_IOMUX_PADS(uart4_pads);
+
+	return 0;
+}
+
+int board_init(void)
+{
+	/* Address of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->ram_size = imx_ddr_size();
+
+	return 0;
+}
+
+#ifdef CONFIG_SPL_BUILD
+#include <libfdt.h>
+#include <spl.h>
+
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/mx6-ddr.h>
+
+/* MMC board initialization is needed till adding DM support in SPL */
+#if defined(CONFIG_FSL_ESDHC) && !defined(CONFIG_DM_MMC)
+#include <mmc.h>
+#include <fsl_esdhc.h>
+
+#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE |             \
+	PAD_CTL_PUS_47K_UP  | PAD_CTL_SPEED_HIGH |               \
+	PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
+
+static iomux_v3_cfg_t const usdhc3_pads[] = {
+	IOMUX_PADS(PAD_SD3_CLK__SD3_CLK	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_CMD__SD3_CMD	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+};
+
+struct fsl_esdhc_cfg usdhc_cfg[1] = {
+	{USDHC3_BASE_ADDR, 1, 4},
+};
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+	int ret = 0;
+
+	switch (cfg->esdhc_base) {
+	case USDHC3_BASE_ADDR:
+		ret = 1;
+		break;
+	}
+
+	return ret;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+	int i, ret;
+
+	/*
+	* According to the board_mmc_init() the following map is done:
+	* (U-boot device node)    (Physical Port)
+	* mmc0				USDHC3
+	*/
+	for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
+		switch (i) {
+		case 0:
+			SETUP_IOMUX_PADS(usdhc3_pads);
+			usdhc_cfg[i].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+			break;
+		default:
+			printf("Warning - USDHC%d controller not supporting\n",
+			       i + 1);
+			return 0;
+		}
+
+		ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
+		if (ret) {
+			printf("Warning: failed to initialize mmc dev %d\n", i);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+#endif
+
+/*
+ * Driving strength:
+ *   0x30 == 40 Ohm
+ *   0x28 == 48 Ohm
+ */
+
+#define IMX6DQ_DRIVE_STRENGTH		0x30
+#define IMX6SDL_DRIVE_STRENGTH		0x28
+
+/* configure MX6Q/DUAL mmdc DDR io registers */
+static struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = {
+	.dram_sdqs0 = 0x28,
+	.dram_sdqs1 = 0x28,
+	.dram_sdqs2 = 0x28,
+	.dram_sdqs3 = 0x28,
+	.dram_sdqs4 = 0x28,
+	.dram_sdqs5 = 0x28,
+	.dram_sdqs6 = 0x28,
+	.dram_sdqs7 = 0x28,
+	.dram_dqm0 = 0x28,
+	.dram_dqm1 = 0x28,
+	.dram_dqm2 = 0x28,
+	.dram_dqm3 = 0x28,
+	.dram_dqm4 = 0x28,
+	.dram_dqm5 = 0x28,
+	.dram_dqm6 = 0x28,
+	.dram_dqm7 = 0x28,
+	.dram_cas = 0x30,
+	.dram_ras = 0x30,
+	.dram_sdclk_0 = 0x30,
+	.dram_sdclk_1 = 0x30,
+	.dram_reset = 0x30,
+	.dram_sdcke0 = 0x3000,
+	.dram_sdcke1 = 0x3000,
+	.dram_sdba2 = 0x00000000,
+	.dram_sdodt0 = 0x30,
+	.dram_sdodt1 = 0x30,
+};
+
+/* configure MX6Q/DUAL mmdc GRP io registers */
+static struct mx6dq_iomux_grp_regs mx6dq_grp_ioregs = {
+	.grp_b0ds = 0x30,
+	.grp_b1ds = 0x30,
+	.grp_b2ds = 0x30,
+	.grp_b3ds = 0x30,
+	.grp_b4ds = 0x30,
+	.grp_b5ds = 0x30,
+	.grp_b6ds = 0x30,
+	.grp_b7ds = 0x30,
+	.grp_addds = 0x30,
+	.grp_ddrmode_ctl = 0x00020000,
+	.grp_ddrpke = 0x00000000,
+	.grp_ddrmode = 0x00020000,
+	.grp_ctlds = 0x30,
+	.grp_ddr_type = 0x000c0000,
+};
+
+/* configure MX6SOLO/DUALLITE mmdc DDR io registers */
+struct mx6sdl_iomux_ddr_regs mx6sdl_ddr_ioregs = {
+	.dram_sdclk_0 = 0x30,
+	.dram_sdclk_1 = 0x30,
+	.dram_cas = 0x30,
+	.dram_ras = 0x30,
+	.dram_reset = 0x30,
+	.dram_sdcke0 = 0x30,
+	.dram_sdcke1 = 0x30,
+	.dram_sdba2 = 0x00000000,
+	.dram_sdodt0 = 0x30,
+	.dram_sdodt1 = 0x30,
+	.dram_sdqs0 = 0x28,
+	.dram_sdqs1 = 0x28,
+	.dram_sdqs2 = 0x28,
+	.dram_sdqs3 = 0x28,
+	.dram_sdqs4 = 0x28,
+	.dram_sdqs5 = 0x28,
+	.dram_sdqs6 = 0x28,
+	.dram_sdqs7 = 0x28,
+	.dram_dqm0 = 0x28,
+	.dram_dqm1 = 0x28,
+	.dram_dqm2 = 0x28,
+	.dram_dqm3 = 0x28,
+	.dram_dqm4 = 0x28,
+	.dram_dqm5 = 0x28,
+	.dram_dqm6 = 0x28,
+	.dram_dqm7 = 0x28,
+};
+
+/* configure MX6SOLO/DUALLITE mmdc GRP io registers */
+struct mx6sdl_iomux_grp_regs mx6sdl_grp_ioregs = {
+	.grp_ddr_type = 0x000c0000,
+	.grp_ddrmode_ctl = 0x00020000,
+	.grp_ddrpke = 0x00000000,
+	.grp_addds = 0x30,
+	.grp_ctlds = 0x30,
+	.grp_ddrmode = 0x00020000,
+	.grp_b0ds = 0x28,
+	.grp_b1ds = 0x28,
+	.grp_b2ds = 0x28,
+	.grp_b3ds = 0x28,
+	.grp_b4ds = 0x28,
+	.grp_b5ds = 0x28,
+	.grp_b6ds = 0x28,
+	.grp_b7ds = 0x28,
+};
+
+/* mt41j256 */
+static struct mx6_ddr3_cfg mt41j256 = {
+	.mem_speed = 1066,
+	.density = 2,
+	.width = 16,
+	.banks = 8,
+	.rowaddr = 13,
+	.coladdr = 10,
+	.pagesz = 2,
+	.trcd = 1375,
+	.trcmin = 4875,
+	.trasmin = 3500,
+	.SRT = 0,
+};
+
+static struct mx6_mmdc_calibration mx6dq_mmdc_calib = {
+	.p0_mpwldectrl0 = 0x000E0009,
+	.p0_mpwldectrl1 = 0x0018000E,
+	.p1_mpwldectrl0 = 0x00000007,
+	.p1_mpwldectrl1 = 0x00000000,
+	.p0_mpdgctrl0 = 0x43280334,
+	.p0_mpdgctrl1 = 0x031C0314,
+	.p1_mpdgctrl0 = 0x4318031C,
+	.p1_mpdgctrl1 = 0x030C0258,
+	.p0_mprddlctl = 0x3E343A40,
+	.p1_mprddlctl = 0x383C3844,
+	.p0_mpwrdlctl = 0x40404440,
+	.p1_mpwrdlctl = 0x4C3E4446,
+};
+
+/* DDR 64bit */
+static struct mx6_ddr_sysinfo mem_q = {
+	.ddr_type	= DDR_TYPE_DDR3,
+	.dsize		= 2,
+	.cs1_mirror	= 0,
+	/* config for full 4GB range so that get_mem_size() works */
+	.cs_density	= 32,
+	.ncs		= 1,
+	.bi_on		= 1,
+	.rtt_nom	= 2,
+	.rtt_wr		= 2,
+	.ralat		= 5,
+	.walat		= 0,
+	.mif3_mode	= 3,
+	.rst_to_cke	= 0x23,
+	.sde_to_rst	= 0x10,
+};
+
+static struct mx6_mmdc_calibration mx6dl_mmdc_calib = {
+	.p0_mpwldectrl0 = 0x001F0024,
+	.p0_mpwldectrl1 = 0x00110018,
+	.p1_mpwldectrl0 = 0x001F0024,
+	.p1_mpwldectrl1 = 0x00110018,
+	.p0_mpdgctrl0 = 0x4230022C,
+	.p0_mpdgctrl1 = 0x02180220,
+	.p1_mpdgctrl0 = 0x42440248,
+	.p1_mpdgctrl1 = 0x02300238,
+	.p0_mprddlctl = 0x44444A48,
+	.p1_mprddlctl = 0x46484A42,
+	.p0_mpwrdlctl = 0x38383234,
+	.p1_mpwrdlctl = 0x3C34362E,
+};
+
+/* DDR 64bit 1GB */
+static struct mx6_ddr_sysinfo mem_dl = {
+	.dsize		= 2,
+	.cs1_mirror	= 0,
+	/* config for full 4GB range so that get_mem_size() works */
+	.cs_density	= 32,
+	.ncs		= 1,
+	.bi_on		= 1,
+	.rtt_nom	= 1,
+	.rtt_wr		= 1,
+	.ralat		= 5,
+	.walat		= 0,
+	.mif3_mode	= 3,
+	.rst_to_cke	= 0x23,
+	.sde_to_rst	= 0x10,
+};
+
+/* DDR 32bit 512MB */
+static struct mx6_ddr_sysinfo mem_s = {
+	.dsize		= 1,
+	.cs1_mirror	= 0,
+	/* config for full 4GB range so that get_mem_size() works */
+	.cs_density	= 32,
+	.ncs		= 1,
+	.bi_on		= 1,
+	.rtt_nom	= 1,
+	.rtt_wr		= 1,
+	.ralat		= 5,
+	.walat		= 0,
+	.mif3_mode	= 3,
+	.rst_to_cke	= 0x23,
+	.sde_to_rst	= 0x10,
+};
+
+static void ccgr_init(void)
+{
+	struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+	writel(0x00003F3F, &ccm->CCGR0);
+	writel(0x0030FC00, &ccm->CCGR1);
+	writel(0x000FC000, &ccm->CCGR2);
+	writel(0x3F300000, &ccm->CCGR3);
+	writel(0xFF00F300, &ccm->CCGR4);
+	writel(0x0F0000C3, &ccm->CCGR5);
+	writel(0x000003CC, &ccm->CCGR6);
+}
+
+static void gpr_init(void)
+{
+	struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
+
+	/* enable AXI cache for VDOA/VPU/IPU */
+	writel(0xF00000CF, &iomux->gpr[4]);
+	/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
+	writel(0x007F007F, &iomux->gpr[6]);
+	writel(0x007F007F, &iomux->gpr[7]);
+}
+
+static void spl_dram_init(void)
+{
+	if (is_mx6solo()) {
+		mx6sdl_dram_iocfg(32, &mx6sdl_ddr_ioregs, &mx6sdl_grp_ioregs);
+		mx6_dram_cfg(&mem_s, &mx6dl_mmdc_calib, &mt41j256);
+	} else if (is_mx6dl()) {
+		mx6sdl_dram_iocfg(64, &mx6sdl_ddr_ioregs, &mx6sdl_grp_ioregs);
+		mx6_dram_cfg(&mem_dl, &mx6dl_mmdc_calib, &mt41j256);
+	} else if (is_mx6dq()) {
+		mx6dq_dram_iocfg(64, &mx6dq_ddr_ioregs, &mx6dq_grp_ioregs);
+		mx6_dram_cfg(&mem_q, &mx6dq_mmdc_calib, &mt41j256);
+	}
+
+	udelay(100);
+}
+
+void board_init_f(ulong dummy)
+{
+	ccgr_init();
+
+	/* setup AIPS and disable watchdog */
+	arch_cpu_init();
+
+	gpr_init();
+
+	/* iomux */
+	board_early_init_f();
+
+	/* setup GP timer */
+	timer_init();
+
+	/* UART clocks enabled and gd valid - init serial console */
+	preloader_console_init();
+
+	/* DDR initialization */
+	spl_dram_init();
+
+	/* Clear the BSS. */
+	memset(__bss_start, 0, __bss_end - __bss_start);
+
+	/* load/boot image from boot device */
+	board_init_r(NULL, 0);
+}
+#endif

board/freescale/mx6sllevk/Kconfig

@@ -0,0 +1,12 @@
+if TARGET_MX6SLLEVK
+
+config SYS_BOARD
+	default "mx6sllevk"
+
+config SYS_VENDOR
+	default "freescale"
+
+config SYS_CONFIG_NAME
+	default "mx6sllevk"
+
+endif

board/freescale/mx6sllevk/Makefile

@@ -0,0 +1,6 @@
+# (C) Copyright 2016 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y  := mx6sllevk.o

board/freescale/mx6sllevk/imximage.cfg

@@ -0,0 +1,127 @@
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+#define __ASSEMBLY__
+#include <config.h>
+
+/* image version */
+
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
+
+BOOT_FROM	sd
+
+#ifdef CONFIG_USE_IMXIMG_PLUGIN
+/*PLUGIN    plugin-binary-file    IRAM_FREE_START_ADDR*/
+PLUGIN	board/freescale/mx6sllevk/plugin.bin 0x00907000
+#else
+
+#ifdef CONFIG_SECURE_BOOT
+CSF CONFIG_CSF_SIZE
+#endif
+
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type           Address        Value
+ *
+ * where:
+ *	Addr-type register length (1,2 or 4 bytes)
+ *	Address	  absolute address of the register
+ *	value	  value to be stored in the register
+ */
+
+/* Enable all clocks */
+DATA 4 0x020c4068 0xffffffff
+DATA 4 0x020c406c 0xffffffff
+DATA 4 0x020c4070 0xffffffff
+DATA 4 0x020c4074 0xffffffff
+DATA 4 0x020c4078 0xffffffff
+DATA 4 0x020c407c 0xffffffff
+DATA 4 0x020c4080 0xffffffff
+
+DATA 4 0x020E0550 0x00080000
+DATA 4 0x020E0534 0x00000000
+DATA 4 0x020E02AC 0x00000030
+DATA 4 0x020E0548 0x00000030
+DATA 4 0x020E052C 0x00000030
+DATA 4 0x020E0530 0x00020000
+DATA 4 0x020E02B0 0x00003030
+DATA 4 0x020E02B4 0x00003030
+DATA 4 0x020E02B8 0x00003030
+DATA 4 0x020E02BC 0x00003030
+DATA 4 0x020E0540 0x00020000
+DATA 4 0x020E0544 0x00000030
+DATA 4 0x020E054C 0x00000030
+DATA 4 0x020E0554 0x00000030
+DATA 4 0x020E0558 0x00000030
+DATA 4 0x020E0294 0x00000030
+DATA 4 0x020E0298 0x00000030
+DATA 4 0x020E029C 0x00000030
+DATA 4 0x020E02A0 0x00000030
+DATA 4 0x020E02C0 0x00082030
+
+DATA 4 0x021B001C 0x00008000
+
+DATA 4 0x021B0800 0xA1390003
+DATA 4 0x021B085c 0x084700C7
+DATA 4 0x021B0890 0x00400000
+DATA 4 0x021B0848 0x3F393B3C
+DATA 4 0x021B0850 0x262C3826
+DATA 4 0x021B081C 0x33333333
+DATA 4 0x021B0820 0x33333333
+DATA 4 0x021B0824 0x33333333
+DATA 4 0x021B0828 0x33333333
+
+DATA 4 0x021B082C 0xf3333333
+DATA 4 0x021B0830 0xf3333333
+DATA 4 0x021B0834 0xf3333333
+DATA 4 0x021B0838 0xf3333333
+DATA 4 0x021B08C0 0x24922492
+DATA 4 0x021B08b8 0x00000800
+
+DATA 4 0x021B0004 0x00020052
+DATA 4 0x021B000C 0x53574333
+DATA 4 0x021B0010 0x00100B22
+DATA 4 0x021B0038 0x00170778
+DATA 4 0x021B0014 0x00C700DB
+DATA 4 0x021B0018 0x00201718
+DATA 4 0x021B002C 0x0F9F26D2
+DATA 4 0x021B0030 0x009F0E10
+DATA 4 0x021B0040 0x0000005F
+DATA 4 0x021B0000 0xC4190000
+
+DATA 4 0x021B083C 0x20000000
+
+DATA 4 0x021B001C 0x00008050
+DATA 4 0x021B001C 0x00008058
+DATA 4 0x021B001C 0x003F8030
+DATA 4 0x021B001C 0x003F8038
+DATA 4 0x021B001C 0xFF0A8030
+DATA 4 0x021B001C 0xFF0A8038
+DATA 4 0x021B001C 0x04028030
+DATA 4 0x021B001C 0x04028038
+DATA 4 0x021B001C 0x83018030
+DATA 4 0x021B001C 0x83018038
+DATA 4 0x021B001C 0x01038030
+DATA 4 0x021B001C 0x01038038
+
+DATA 4 0x021B0020 0x00001800
+DATA 4 0x021B0800 0xA1390003
+DATA 4 0x021B0004 0x00020052
+DATA 4 0x021B0404 0x00011006
+DATA 4 0x021B001C 0x00000000
+#endif

board/freescale/mx6sllevk/mx6sllevk.c

@@ -0,0 +1,131 @@
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <asm/arch/clock.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/boot_mode.h>
+#include <asm/io.h>
+#include <common.h>
+#include <linux/sizes.h>
+#include <mmc.h>
+#include <power/pmic.h>
+#include <power/pfuze100_pmic.h>
+#include "../common/pfuze.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL  (PAD_CTL_PKE | PAD_CTL_PUE |		\
+	PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |		\
+	PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
+
+int dram_init(void)
+{
+	gd->ram_size = imx_ddr_size();
+
+	return 0;
+}
+
+static iomux_v3_cfg_t const uart1_pads[] = {
+	MX6_PAD_UART1_TXD__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
+	MX6_PAD_UART1_RXD__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const wdog_pads[] = {
+	MX6_PAD_WDOG_B__WDOG1_B | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+static void setup_iomux_uart(void)
+{
+	imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
+}
+
+#ifdef CONFIG_DM_PMIC_PFUZE100
+int power_init_board(void)
+{
+	struct udevice *dev;
+	int ret;
+	u32 dev_id, rev_id, i;
+	u32 switch_num = 6;
+	u32 offset = PFUZE100_SW1CMODE;
+
+	ret = pmic_get("pfuze100", &dev);
+	if (ret == -ENODEV)
+		return 0;
+
+	if (ret != 0)
+		return ret;
+
+	dev_id = pmic_reg_read(dev, PFUZE100_DEVICEID);
+	rev_id = pmic_reg_read(dev, PFUZE100_REVID);
+	printf("PMIC: PFUZE100! DEV_ID=0x%x REV_ID=0x%x\n", dev_id, rev_id);
+
+
+	/* Init mode to APS_PFM */
+	pmic_reg_write(dev, PFUZE100_SW1ABMODE, APS_PFM);
+
+	for (i = 0; i < switch_num - 1; i++)
+		pmic_reg_write(dev, offset + i * SWITCH_SIZE, APS_PFM);
+
+	/* set SW1AB staby volatage 0.975V */
+	pmic_clrsetbits(dev, PFUZE100_SW1ABSTBY, 0x3f, 0x1b);
+
+	/* set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */
+	pmic_clrsetbits(dev, PFUZE100_SW1ABCONF, 0xc0, 0x40);
+
+	/* set SW1C staby volatage 0.975V */
+	pmic_clrsetbits(dev, PFUZE100_SW1CSTBY, 0x3f, 0x1b);
+
+	/* set SW1C/VDDSOC step ramp up time to from 16us to 4us/25mV */
+	pmic_clrsetbits(dev, PFUZE100_SW1CCONF, 0xc0, 0x40);
+
+	return 0;
+}
+#endif
+
+int board_early_init_f(void)
+{
+	setup_iomux_uart();
+
+	return 0;
+}
+
+int board_init(void)
+{
+	/* Address of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+	return 0;
+}
+
+int board_late_init(void)
+{
+	imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	puts("Board: MX6SLL EVK\n");
+
+	return 0;
+}
+
+int board_mmc_get_env_dev(int devno)
+{
+	return devno;
+}
+
+int mmc_map_to_kernel_blk(int devno)
+{
+	return devno;
+}

board/freescale/mx6sllevk/plugin.S

@@ -0,0 +1,155 @@
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <config.h>
+
+/* DDR script */
+.macro imx6sll_evk_ddr_setting
+	ldr r0, =IOMUXC_BASE_ADDR
+	ldr r1, =0x00080000
+	str r1, [r0, #0x550]
+	ldr r1, =0x00000000
+	str r1, [r0, #0x534]
+	ldr r1, =0x00000030
+	str r1, [r0, #0x2AC]
+	str r1, [r0, #0x548]
+	str r1, [r0, #0x52C]
+	ldr r1, =0x00020000
+	str r1, [r0, #0x530]
+	ldr r1, =0x00003030
+	str r1, [r0, #0x2B0]
+	str r1, [r0, #0x2B4]
+	str r1, [r0, #0x2B8]
+	str r1, [r0, #0x2BC]
+
+	ldr r1, =0x00020000
+	str r1, [r0, #0x540]
+	ldr r1, =0x00000030
+	str r1, [r0, #0x544]
+	str r1, [r0, #0x54C]
+	str r1, [r0, #0x554]
+	str r1, [r0, #0x558]
+	str r1, [r0, #0x294]
+	str r1, [r0, #0x298]
+	str r1, [r0, #0x29C]
+	str r1, [r0, #0x2A0]
+
+	ldr r1, =0x00082030
+	str r1, [r0, #0x2C0]
+
+	ldr r0, =MMDC_P0_BASE_ADDR
+	ldr r1, =0x00008000
+	str r1, [r0, #0x1C]
+	ldr r1, =0xA1390003
+	str r1, [r0, #0x800]
+	ldr r1, =0x084700C7
+	str r1, [r0, #0x85C]
+	ldr r1, =0x00400000
+	str r1, [r0, #0x890]
+
+	ldr r1, =0x3F393B3C
+	str r1, [r0, #0x848]
+	ldr r1, =0x262C3826
+	str r1, [r0, #0x850]
+
+	ldr r1, =0x33333333
+	str r1, [r0, #0x81C]
+	str r1, [r0, #0x820]
+	str r1, [r0, #0x824]
+	str r1, [r0, #0x828]
+
+	ldr r1, =0xf3333333
+	str r1, [r0, #0x82C]
+	str r1, [r0, #0x830]
+	str r1, [r0, #0x834]
+	str r1, [r0, #0x838]
+
+	ldr r1, =0x24922492
+	str r1, [r0, #0x8C0]
+	ldr r1, =0x00000800
+	str r1, [r0, #0x8B8]
+
+	ldr r1, =0x00020052
+	str r1, [r0, #0x004]
+	ldr r1, =0x53574333
+	str r1, [r0, #0x00C]
+	ldr r1, =0x00100B22
+	str r1, [r0, #0x010]
+	ldr r1, =0x00170778
+	str r1, [r0, #0x038]
+	ldr r1, =0x00C700DB
+	str r1, [r0, #0x014]
+	ldr r1, =0x00201718
+	str r1, [r0, #0x018]
+	ldr r1, =0x0F9F26D2
+	str r1, [r0, #0x02C]
+	ldr r1, =0x009F0E10
+	str r1, [r0, #0x030]
+	ldr r1, =0x0000005F
+	str r1, [r0, #0x040]
+	ldr r1, =0xC4190000
+	str r1, [r0, #0x000]
+	ldr r1, =0x20000000
+	str r1, [r0, #0x83C]
+
+	ldr r1, =0x00008050
+	str r1, [r0, #0x01C]
+	ldr r1, =0x00008058
+	str r1, [r0, #0x01C]
+	ldr r1, =0x003F8030
+	str r1, [r0, #0x01C]
+	ldr r1, =0x003F8038
+	str r1, [r0, #0x01C]
+	ldr r1, =0xFF0A8030
+	str r1, [r0, #0x01C]
+	ldr r1, =0xFF0A8038
+	str r1, [r0, #0x01C]
+	ldr r1, =0x04028030
+	str r1, [r0, #0x01C]
+	ldr r1, =0x04028038
+	str r1, [r0, #0x01C]
+	ldr r1, =0x83018030
+	str r1, [r0, #0x01C]
+	ldr r1, =0x83018038
+	str r1, [r0, #0x01C]
+	ldr r1, =0x01038030
+	str r1, [r0, #0x01C]
+	ldr r1, =0x01038038
+	str r1, [r0, #0x01C]
+
+	ldr r1, =0x00001800
+	str r1, [r0, #0x020]
+	ldr r1, =0xA1390003
+	str r1, [r0, #0x800]
+	ldr r1, =0x00020052
+	str r1, [r0, #0x004]
+	ldr r1, =0x00011006
+	str r1, [r0, #0x404]
+	ldr r1, =0x00000000
+	str r1, [r0, #0x01C]
+.endm
+
+.macro imx6_clock_gating
+	ldr r0, =CCM_BASE_ADDR
+	ldr r1, =0xffffffff
+	str r1, [r0, #0x068]
+	str r1, [r0, #0x06c]
+	str r1, [r0, #0x070]
+	str r1, [r0, #0x074]
+	str r1, [r0, #0x078]
+	str r1, [r0, #0x07c]
+	str r1, [r0, #0x080]
+.endm
+
+.macro imx6_qos_setting
+.endm
+
+.macro imx6_ddr_setting
+	imx6sll_evk_ddr_setting
+.endm
+
+/* include the common plugin code here */
+#include <asm/arch/mx6_plugin.S>

board/freescale/mx6sxsabresd/mx6sxsabresd.c

@@ -504,7 +504,7 @@ static iomux_v3_cfg_t const lcd_pads[] = {
 
 static int setup_lcd(void)
 {
-	enable_lcdif_clock(LCDIF1_BASE_ADDR);
+	enable_lcdif_clock(LCDIF1_BASE_ADDR, 1);
 
 	imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
 

board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c

@@ -600,7 +600,7 @@ static iomux_v3_cfg_t const lcd_pads[] = {
 
 static int setup_lcd(void)
 {
-	enable_lcdif_clock(LCDIF1_BASE_ADDR);
+	enable_lcdif_clock(LCDIF1_BASE_ADDR, 1);
 
 	imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
 

board/grinn/liteboard/Kconfig

@@ -0,0 +1,12 @@
+if TARGET_LITEBOARD
+
+config SYS_BOARD
+	default "liteboard"
+
+config SYS_VENDOR
+	default "grinn"
+
+config SYS_CONFIG_NAME
+	default "liteboard"
+
+endif

board/grinn/liteboard/MAINTAINERS

@@ -0,0 +1,6 @@
+LITEBOARD
+M:	Marcin Niestroj <m.niestroj@grinn-global.com>
+S:	Maintained
+F:	board/grinn/liteboard/
+F:	include/configs/liteboard.h
+F:	configs/liteboard_defconfig

board/grinn/liteboard/Makefile

@@ -0,0 +1,6 @@
+# (C) Copyright 2016 Grinn
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y  := board.o

board/grinn/liteboard/README

@@ -0,0 +1,31 @@
+How to use U-Boot on Grinn's liteBoard
+--------------------------------------
+
+- Build U-Boot for liteBoard:
+
+$ make mrproper
+$ make liteboard_defconfig
+$ make
+
+This will generate the SPL image called SPL and the u-boot.img.
+
+- Flash the SPL image into the micro SD card:
+
+sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
+
+- Flash the u-boot.img image into the micro SD card:
+
+sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync
+
+- Jumper settings:
+
+S1: 0 1 0 1 1 1
+
+where 0 means bottom position and 1 means top position (from the
+switch label numbers reference).
+
+- Insert the micro SD card in the board.
+
+- Connect USB cable between liteBoard and the PC for the power and console.
+
+- U-Boot messages should come up.

board/grinn/liteboard/board.c

@@ -0,0 +1,287 @@
+/*
+ * Copyright (C) 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright (C) 2016 Grinn
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <asm/arch/clock.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/mx6ul_pins.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/boot_mode.h>
+#include <asm/io.h>
+#include <common.h>
+#include <fsl_esdhc.h>
+#include <linux/sizes.h>
+#include <linux/fb.h>
+#include <mach/litesom.h>
+#include <miiphy.h>
+#include <mmc.h>
+#include <netdev.h>
+#include <spl.h>
+#include <usb.h>
+#include <usb/ehci-ci.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL  (PAD_CTL_PKE | PAD_CTL_PUE |		\
+	PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |		\
+	PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
+
+#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE |		\
+	PAD_CTL_PUS_22K_UP  | PAD_CTL_SPEED_LOW |		\
+	PAD_CTL_DSE_80ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
+
+#define ENET_PAD_CTRL  (PAD_CTL_PUS_100K_UP | PAD_CTL_PUE |     \
+	PAD_CTL_SPEED_HIGH   |                                   \
+	PAD_CTL_DSE_48ohm   | PAD_CTL_SRE_FAST)
+
+#define MDIO_PAD_CTRL  (PAD_CTL_PUS_100K_UP | PAD_CTL_PUE |     \
+	PAD_CTL_DSE_48ohm   | PAD_CTL_SRE_FAST | PAD_CTL_ODE)
+
+#define ENET_CLK_PAD_CTRL  (PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST)
+
+static iomux_v3_cfg_t const uart1_pads[] = {
+	MX6_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
+	MX6_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const sd_pads[] = {
+	MX6_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD1_DATA0__USDHC1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD1_DATA1__USDHC1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD1_DATA2__USDHC1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD1_DATA3__USDHC1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+
+	/* CD */
+	MX6_PAD_UART1_RTS_B__GPIO1_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+#ifdef CONFIG_FEC_MXC
+static iomux_v3_cfg_t const fec1_pads[] = {
+	MX6_PAD_GPIO1_IO06__ENET1_MDIO | MUX_PAD_CTRL(MDIO_PAD_CTRL),
+	MX6_PAD_GPIO1_IO07__ENET1_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
+	MX6_PAD_ENET1_TX_DATA0__ENET1_TDATA00 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+	MX6_PAD_ENET1_TX_DATA1__ENET1_TDATA01 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+	MX6_PAD_ENET1_TX_EN__ENET1_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL),
+	MX6_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 | MUX_PAD_CTRL(ENET_CLK_PAD_CTRL),
+	MX6_PAD_ENET1_RX_DATA0__ENET1_RDATA00 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+	MX6_PAD_ENET1_RX_DATA1__ENET1_RDATA01 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+	MX6_PAD_ENET1_RX_ER__ENET1_RX_ER | MUX_PAD_CTRL(ENET_PAD_CTRL),
+	MX6_PAD_ENET1_RX_EN__ENET1_RX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL),
+};
+
+static void setup_iomux_fec(void)
+{
+	imx_iomux_v3_setup_multiple_pads(fec1_pads, ARRAY_SIZE(fec1_pads));
+}
+#endif
+
+static void setup_iomux_uart(void)
+{
+	imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
+}
+
+#ifdef CONFIG_FSL_ESDHC
+static struct fsl_esdhc_cfg sd_cfg = {USDHC1_BASE_ADDR, 0, 4};
+
+#define SD_CD_GPIO	IMX_GPIO_NR(1, 19)
+
+static int mmc_get_env_devno(void)
+{
+	u32 soc_sbmr = readl(SRC_BASE_ADDR + 0x4);
+	int dev_no;
+	u32 bootsel;
+
+	bootsel = (soc_sbmr & 0x000000FF) >> 6;
+
+	/* If not boot from sd/mmc, use default value */
+	if (bootsel != 1)
+		return CONFIG_SYS_MMC_ENV_DEV;
+
+	/* BOOT_CFG2[3] and BOOT_CFG2[4] */
+	dev_no = (soc_sbmr & 0x00001800) >> 11;
+
+	return dev_no;
+}
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+	int ret = 0;
+
+	switch (cfg->esdhc_base) {
+	case USDHC1_BASE_ADDR:
+		ret = !gpio_get_value(SD_CD_GPIO);
+		break;
+	case USDHC2_BASE_ADDR:
+		ret = 1;
+		break;
+	}
+
+	return ret;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+	int ret;
+
+	/* SD */
+	imx_iomux_v3_setup_multiple_pads(sd_pads, ARRAY_SIZE(sd_pads));
+	gpio_direction_input(SD_CD_GPIO);
+	sd_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+
+	ret = fsl_esdhc_initialize(bis, &sd_cfg);
+	if (ret) {
+		printf("Warning: failed to initialize mmc dev 0 (SD)\n");
+		return ret;
+	}
+
+	return litesom_mmc_init(bis);
+}
+
+static int check_mmc_autodetect(void)
+{
+	char *autodetect_str = getenv("mmcautodetect");
+
+	if ((autodetect_str != NULL) &&
+	    (strcmp(autodetect_str, "yes") == 0)) {
+		return 1;
+	}
+
+	return 0;
+}
+
+void board_late_mmc_init(void)
+{
+	char cmd[32];
+	char mmcblk[32];
+	u32 dev_no = mmc_get_env_devno();
+
+	if (!check_mmc_autodetect())
+		return;
+
+	setenv_ulong("mmcdev", dev_no);
+
+	/* Set mmcblk env */
+	sprintf(mmcblk, "/dev/mmcblk%dp2 rootwait rw",
+		dev_no);
+	setenv("mmcroot", mmcblk);
+
+	sprintf(cmd, "mmc dev %d", dev_no);
+	run_command(cmd, 0);
+}
+#endif
+
+#ifdef CONFIG_FEC_MXC
+int board_eth_init(bd_t *bis)
+{
+	setup_iomux_fec();
+
+	return fecmxc_initialize(bis);
+}
+
+static int setup_fec(void)
+{
+	struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
+	int ret;
+
+	/* Use 50M anatop loopback REF_CLK1 for ENET1, clear gpr1[13],
+	   set gpr1[17]*/
+	clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC1_MASK,
+			IOMUX_GPR1_FEC1_CLOCK_MUX1_SEL_MASK);
+
+	ret = enable_fec_anatop_clock(0, ENET_50MHZ);
+	if (ret)
+		return ret;
+
+	enable_enet_clk(1);
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_USB_EHCI_MX6
+int board_usb_phy_mode(int port)
+{
+	return USB_INIT_HOST;
+}
+#endif
+
+int board_early_init_f(void)
+{
+	setup_iomux_uart();
+
+	return 0;
+}
+
+int board_init(void)
+{
+	/* Address of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+#ifdef	CONFIG_FEC_MXC
+	setup_fec();
+#endif
+
+	return 0;
+}
+
+#ifdef CONFIG_CMD_BMODE
+static const struct boot_mode board_boot_modes[] = {
+	/* 4 bit bus width */
+	{"sd",   MAKE_CFGVAL(0x40, 0x20, 0x00, 0x00)},
+	{"emmc", MAKE_CFGVAL(0x60, 0x48, 0x00, 0x00)},
+	{NULL,	 0},
+};
+#endif
+
+int board_late_init(void)
+{
+#ifdef CONFIG_CMD_BMODE
+	add_board_boot_modes(board_boot_modes);
+#endif
+
+#ifdef CONFIG_ENV_IS_IN_MMC
+	board_late_mmc_init();
+#endif
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	puts("Board: Grinn liteBoard\n");
+
+	return 0;
+}
+
+#ifdef CONFIG_SPL_BUILD
+void board_boot_order(u32 *spl_boot_list)
+{
+	struct src *psrc = (struct src *)SRC_BASE_ADDR;
+	unsigned gpr10_boot = readl(&psrc->gpr10) & (1 << 28);
+	unsigned reg = gpr10_boot ? readl(&psrc->gpr9) : readl(&psrc->sbmr1);
+	unsigned port = (reg >> 11) & 0x1;
+
+	if (port == 0) {
+		spl_boot_list[0] = BOOT_DEVICE_MMC1;
+		spl_boot_list[1] = BOOT_DEVICE_MMC2;
+	} else {
+		spl_boot_list[0] = BOOT_DEVICE_MMC2;
+		spl_boot_list[1] = BOOT_DEVICE_MMC1;
+	}
+}
+
+void board_init_f(ulong dummy)
+{
+	litesom_init_f();
+}
+#endif

board/toradex/apalis_imx6/1066mhz_4x128mx16.cfg

@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2013 Boundary Devices
+ * Copyright (C) 2014-2016 Toradex AG
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+DATA 4, MX6_MMDC_P0_MDPDC, 0x00020036
+DATA 4, MX6_MMDC_P0_MDCFG0, 0x555A7954
+DATA 4, MX6_MMDC_P0_MDCFG1, 0xDB328F64
+DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB
+DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2
+DATA 4, MX6_MMDC_P0_MDOR, 0x005A1023
+DATA 4, MX6_MMDC_P0_MDOTC, 0x09555050
+DATA 4, MX6_MMDC_P0_MDPDC, 0x00025576
+DATA 4, MX6_MMDC_P0_MDASP, 0x00000027
+DATA 4, MX6_MMDC_P0_MDCTL, 0x831A0000
+DATA 4, MX6_MMDC_P0_MDSCR, 0x04088032
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00428031
+DATA 4, MX6_MMDC_P0_MDSCR, 0x19308030
+DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040
+DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003
+DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003
+DATA 4, MX6_MMDC_P0_MDREF, 0x00005800
+DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00000000
+DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00000000
+
+DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x432A0338
+DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x03260324
+DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x43340344
+DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x031E027C
+
+DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x33272D2E
+DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x2F312B37
+
+DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x3A35433C
+DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x4336453F
+
+DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x0009000E
+DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x0018000B
+DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x00060015
+DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x0006000E
+
+DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800
+DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000
+DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006

board/toradex/apalis_imx6/1066mhz_4x256mx16.cfg

@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2013 Boundary Devices
+ * Copyright (C) 2014-2016 Toradex AG
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+DATA 4, MX6_MMDC_P0_MDPDC, 0x00020036
+DATA 4, MX6_MMDC_P0_MDCFG0, 0x898E78f5
+DATA 4, MX6_MMDC_P0_MDCFG1, 0xff328f64
+DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB
+DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2
+DATA 4, MX6_MMDC_P0_MDOR, 0x008E1023
+DATA 4, MX6_MMDC_P0_MDOTC, 0x09444040
+DATA 4, MX6_MMDC_P0_MDPDC, 0x00025576
+DATA 4, MX6_MMDC_P0_MDASP, 0x00000047
+DATA 4, MX6_MMDC_P0_MDCTL, 0x841A0000
+DATA 4, MX6_MMDC_P0_MDSCR, 0x02888032
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031
+DATA 4, MX6_MMDC_P0_MDSCR, 0x19408030
+DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040
+DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003
+DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003
+DATA 4, MX6_MMDC_P0_MDREF, 0x00007800
+DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227
+DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227
+
+DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x03300338
+DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x03240324
+DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x03440350
+DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x032C0308
+
+DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x40363C3E
+DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x3C3E3C46
+
+DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x403E463E
+DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x4A384C46
+
+DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x0009000E
+DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x0018000B
+DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x00060015
+DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x0006000E
+
+DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800
+DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000
+DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006

board/toradex/apalis_imx6/Kconfig

@@ -0,0 +1,55 @@
+if TARGET_APALIS_IMX6
+
+config SYS_BOARD
+	default "apalis_imx6"
+
+config SYS_CONFIG_NAME
+	default "apalis_imx6"
+
+config SYS_CPU
+	default "armv7"
+
+config SYS_SOC
+	default "mx6"
+
+config SYS_VENDOR
+	default "toradex"
+
+config TDX_CFG_BLOCK
+	default y
+
+config TDX_HAVE_MMC
+	default y
+
+config TDX_CFG_BLOCK_DEV
+	default "0"
+
+config TDX_CFG_BLOCK_PART
+	default "1"
+
+# Toradex config block in eMMC, at the end of 1st "boot sector"
+config TDX_CFG_BLOCK_OFFSET
+	default "-512"
+
+config TDX_CMD_IMX_MFGR
+	bool "Enable factory testing commands for Toradex iMX 6 modules"
+	help
+	  This adds the commands
+	    pf0100_otp_prog - Program the OTP fuses on the PMIC PF0100
+	  If executed on already fused modules it doesn't change any fuse setting.
+	default y
+
+config TDX_APALIS_IMX6_V1_0
+	bool "Apalis iMX6 V1.0 HW"
+	help
+	  Apalis iMX6 V1.0 HW has a different pinout for the UART.
+	    The UARTs must be used in DCE mode, RTS/CTS are swapped and
+	    thus unusable on standard carrier boards.
+	    This option configures DCE mode unconditionally. Whithout this
+	    option the config block stating V1.0 HW selects DCE mode,
+	    otherwise the UARTs are configuered in DTE mode.
+	default n
+
+source "board/toradex/common/Kconfig"
+
+endif

board/toradex/apalis_imx6/MAINTAINERS

@@ -0,0 +1,9 @@
+Apalis iMX6
+M:	Max Krummenacher <max.krummenacher@toradex.com>
+W:	http://developer.toradex.com/software/linux/linux-software
+S:	Maintained
+F:	board/toradex/apalis_imx6/
+F:	include/configs/apalis_imx6.h
+F:	configs/apalis_imx6_defconfig
+F:	configs/apalis_imx6_nospl_com_defconfig
+F:	configs/apalis_imx6_nospl_it_defconfig

board/toradex/apalis_imx6/Makefile

@@ -0,0 +1,5 @@
+# Copyright (c) 2012-2014 Toradex, Inc.
+# SPDX-License-Identifier:      GPL-2.0+
+
+obj-y  := apalis_imx6.o do_fuse.o
+obj-$(CONFIG_TDX_CMD_IMX_MFGR)  += pf0100.o

board/toradex/apalis_imx6/apalis_imx6q.cfg

@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2013 Boundary Devices
+ * Copyright (C) 2014-2016, Toradex AG
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * Refer doc/README.imximage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+/* image version */
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
+BOOT_FROM      sd
+
+#define __ASSEMBLY__
+#include <config.h>
+#include "asm/arch/mx6-ddr.h"
+#include "asm/arch/iomux.h"
+#include "asm/arch/crm_regs.h"
+
+#include "ddr-setup.cfg"
+#if CONFIG_DDR_MB == 2048
+#include "1066mhz_4x256mx16.cfg"
+#else
+#include "1066mhz_4x128mx16.cfg"
+#endif
+#include "clocks.cfg"

board/toradex/apalis_imx6/clocks.cfg

@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2013 Boundary Devices
+ * Copyright (C) 2014-2016, Toradex AG
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type           Address        Value
+ *
+ * where:
+ *      Addr-type register length (1,2 or 4 bytes)
+ *      Address   absolute address of the register
+ *      value     value to be stored in the register
+ */
+
+/* set the default clock gate to save power */
+DATA 4, CCM_CCGR0, 0x00C03F3F
+DATA 4, CCM_CCGR1, 0x0030FC03
+DATA 4, CCM_CCGR2, 0x0FFFC000
+DATA 4, CCM_CCGR3, 0x3FF00000
+DATA 4, CCM_CCGR4, 0x00FFF300
+DATA 4, CCM_CCGR5, 0x0F0000C3
+DATA 4, CCM_CCGR6, 0x000003FF
+
+/* enable AXI cache for VDOA/VPU/IPU */
+DATA 4, MX6_IOMUXC_GPR4, 0xF00000CF
+/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
+DATA 4, MX6_IOMUXC_GPR6, 0x007F007F
+DATA 4, MX6_IOMUXC_GPR7, 0x007F007F
+
+/*
+ * Setup CCM_CCOSR register as follows:
+ *
+ * cko1_en  = 1	   --> CKO1 enabled
+ * cko1_div = 111  --> divide by 8
+ * cko1_sel = 1011 --> ahb_clk_root
+ *
+ * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz
+ */
+DATA 4, CCM_CCOSR, 0x000000fb

board/toradex/apalis_imx6/ddr-setup.cfg

@@ -0,0 +1,97 @@
+/*
+ * Copyright (C) 2013 Boundary Devices
+ * Copyright (C) 2014-2016, Toradex AG
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type           Address        Value
+ *
+ * where:
+ *      Addr-type register length (1,2 or 4 bytes)
+ *      Address   absolute address of the register
+ *      value     value to be stored in the register
+ */
+
+/*
+ * DDR3 settings
+ * MX6Q    ddr is limited to 1066 Mhz	currently 1056 MHz(528 MHz clock),
+ *	   memory bus width: 64 bits	x16/x32/x64
+ * MX6DL   ddr is limited to 800 MHz(400 MHz clock)
+ *	   memory bus width: 64 bits	x16/x32/x64
+ * MX6SOLO ddr is limited to 800 MHz(400 MHz clock)
+ *	   memory bus width: 32 bits	x16/x32
+ */
+DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000030
+
+DATA 4, MX6_IOM_GRP_B0DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B1DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B2DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B3DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B4DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B5DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B6DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B7DS, 0x00000030
+DATA 4, MX6_IOM_GRP_ADDDS, 0x00000030
+/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
+DATA 4, MX6_IOM_GRP_CTLDS, 0x00000030
+
+DATA 4, MX6_IOM_DRAM_DQM0, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM1, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM2, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM3, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM4, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM5, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM6, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM7, 0x00020030
+
+DATA 4, MX6_IOM_DRAM_CAS, 0x00020030
+DATA 4, MX6_IOM_DRAM_RAS, 0x00020030
+DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00020030
+DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00020030
+
+DATA 4, MX6_IOM_DRAM_RESET, 0x00020030
+DATA 4, MX6_IOM_DRAM_SDCKE0, 0x00003000
+DATA 4, MX6_IOM_DRAM_SDCKE1, 0x00003000
+
+DATA 4, MX6_IOM_DRAM_SDODT0, 0x00003030
+DATA 4, MX6_IOM_DRAM_SDODT1, 0x00003030
+
+/* (differential input) */
+DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000
+/* (differential input) */
+DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000
+/* disable ddr pullups */
+DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000
+DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000
+/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
+DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000C0000
+
+/* Read data DQ Byte0-3 delay */
+DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333
+DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333
+DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333
+DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333
+DATA 4, MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333
+DATA 4, MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333
+DATA 4, MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333
+DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333
+
+/*
+ * MDMISC	mirroring	interleaved (row/bank/col)
+ */
+DATA 4, MX6_MMDC_P0_MDMISC, 0x00081740
+
+/*
+ * MDSCR	con_req
+ */
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000

board/toradex/apalis_imx6/do_fuse.c

@@ -0,0 +1,98 @@
+/*
+ * Copyright (C) 2014-2016, Toradex AG
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/*
+ * Helpers for i.MX OTP fusing during module production
+*/
+
+#include <common.h>
+#ifndef CONFIG_SPL_BUILD
+#include <console.h>
+#include <fuse.h>
+
+static int mfgr_fuse(void)
+{
+	unsigned val, val6;
+
+	fuse_sense(0, 5, &val);
+	printf("Fuse 0, 5: %8x\n", val);
+	fuse_sense(0, 6, &val6);
+	printf("Fuse 0, 6: %8x\n", val6);
+	fuse_sense(4, 3, &val);
+	printf("Fuse 4, 3: %8x\n", val);
+	fuse_sense(4, 2, &val);
+	printf("Fuse 4, 2: %8x\n", val);
+	if (val6 & 0x10) {
+		puts("BT_FUSE_SEL already fused, will do nothing\n");
+		return CMD_RET_FAILURE;
+	}
+	/* boot cfg */
+	fuse_prog(0, 5, 0x00005072);
+	/* BT_FUSE_SEL */
+	fuse_prog(0, 6, 0x00000010);
+	return CMD_RET_SUCCESS;
+}
+
+int do_mfgr_fuse(cmd_tbl_t *cmdtp, int flag, int argc,
+		char * const argv[])
+{
+	int ret;
+	puts("Fusing...\n");
+	ret = mfgr_fuse();
+	if (ret == CMD_RET_SUCCESS)
+		puts("done.\n");
+	else
+		puts("failed.\n");
+	return ret;
+}
+
+int do_updt_fuse(cmd_tbl_t *cmdtp, int flag, int argc,
+		char * const argv[])
+{
+	unsigned val;
+	int ret;
+	int confirmed = argc >= 1 && !strcmp(argv[1], "-y");
+
+	/* can be used in scripts for command availability check */
+	if (argc >= 1 && !strcmp(argv[1], "-n"))
+		return CMD_RET_SUCCESS;
+
+	/* boot cfg */
+	fuse_sense(0, 5, &val);
+	printf("Fuse 0, 5: %8x\n", val);
+	if (val & 0x10) {
+		puts("Fast boot mode already fused, no need to fuse\n");
+		return CMD_RET_SUCCESS;
+	}
+	if (!confirmed) {
+		puts("Warning: Programming fuses is an irreversible operation!\n"
+				"         Updating to fast boot mode prevents easy\n"
+				"         downgrading to previous BSP versions.\n"
+				"\nReally perform this fuse programming? <y/N>\n");
+		if (!confirm_yesno())
+			return CMD_RET_FAILURE;
+	}
+	puts("Fusing fast boot mode...\n");
+	ret = fuse_prog(0, 5, 0x00005072);
+	if (ret == CMD_RET_SUCCESS)
+		puts("done.\n");
+	else
+		puts("failed.\n");
+	return ret;
+}
+
+U_BOOT_CMD(
+	mfgr_fuse, 1, 0, do_mfgr_fuse,
+	"OTP fusing during module production",
+	""
+);
+
+U_BOOT_CMD(
+	updt_fuse, 2, 0, do_updt_fuse,
+	"OTP fusing during module update",
+	"updt_fuse [-n] [-y] - boot cfg fast boot mode fusing"
+);
+#endif /* CONFIG_SPL_BUILD */

board/toradex/apalis_imx6/pf0100.c

@@ -0,0 +1,228 @@
+/*
+ * Copyright (C) 2014-2016, Toradex AG
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/*
+ * Helpers for Freescale PMIC PF0100
+*/
+
+#include <common.h>
+#include <i2c.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/gpio.h>
+#include <asm/imx-common/iomux-v3.h>
+
+#include "pf0100_otp.inc"
+#include "pf0100.h"
+
+/* define for PMIC register dump */
+/*#define DEBUG */
+
+/* use Apalis GPIO1 to switch on VPGM, ON: 1 */
+static iomux_v3_cfg_t const pmic_prog_pads[] = {
+	MX6_PAD_NANDF_D4__GPIO2_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL),
+#	define PMIC_PROG_VOLTAGE IMX_GPIO_NR(2, 4)
+};
+
+unsigned pmic_init(void)
+{
+	unsigned programmed = 0;
+	uchar bus = 1;
+	uchar devid, revid, val;
+
+	puts("PMIC: ");
+	if (!((0 == i2c_set_bus_num(bus)) &&
+	      (0 == i2c_probe(PFUZE100_I2C_ADDR)))) {
+		puts("i2c bus failed\n");
+		return 0;
+	}
+	/* get device ident */
+	if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_DEVICEID, 1, &devid, 1) < 0) {
+		puts("i2c pmic devid read failed\n");
+		return 0;
+	}
+	if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_REVID, 1, &revid, 1) < 0) {
+		puts("i2c pmic revid read failed\n");
+		return 0;
+	}
+	printf("device id: 0x%.2x, revision id: 0x%.2x\n", devid, revid);
+
+#ifdef DEBUG
+	{
+		unsigned i, j;
+
+		for (i = 0; i < 16; i++)
+			printf("\t%x", i);
+		for (j = 0; j < 0x80; ) {
+			printf("\n%2x", j);
+			for (i = 0; i < 16; i++) {
+				i2c_read(PFUZE100_I2C_ADDR, j+i, 1, &val, 1);
+				printf("\t%2x", val);
+			}
+			j += 0x10;
+		}
+		printf("\nEXT Page 1");
+
+		val = PFUZE100_PAGE_REGISTER_PAGE1;
+		if (i2c_write(PFUZE100_I2C_ADDR, PFUZE100_PAGE_REGISTER, 1,
+			      &val, 1)) {
+			puts("i2c write failed\n");
+			return 0;
+		}
+
+		for (j = 0x80; j < 0x100; ) {
+			printf("\n%2x", j);
+			for (i = 0; i < 16; i++) {
+				i2c_read(PFUZE100_I2C_ADDR, j+i, 1, &val, 1);
+				printf("\t%2x", val);
+			}
+			j += 0x10;
+		}
+		printf("\nEXT Page 2");
+
+		val = PFUZE100_PAGE_REGISTER_PAGE2;
+		if (i2c_write(PFUZE100_I2C_ADDR, PFUZE100_PAGE_REGISTER, 1,
+			      &val, 1)) {
+			puts("i2c write failed\n");
+			return 0;
+		}
+
+		for (j = 0x80; j < 0x100; ) {
+			printf("\n%2x", j);
+			for (i = 0; i < 16; i++) {
+				i2c_read(PFUZE100_I2C_ADDR, j+i, 1, &val, 1);
+				printf("\t%2x", val);
+			}
+			j += 0x10;
+		}
+		printf("\n");
+	}
+#endif
+	/* get device programmed state */
+	val = PFUZE100_PAGE_REGISTER_PAGE1;
+	if (i2c_write(PFUZE100_I2C_ADDR, PFUZE100_PAGE_REGISTER, 1, &val, 1)) {
+		puts("i2c write failed\n");
+		return 0;
+	}
+	if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_FUSE_POR1, 1, &val, 1) < 0) {
+		puts("i2c fuse_por read failed\n");
+		return 0;
+	}
+	if (val & PFUZE100_FUSE_POR_M)
+		programmed++;
+
+	if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_FUSE_POR2, 1, &val, 1) < 0) {
+		puts("i2c fuse_por read failed\n");
+		return programmed;
+	}
+	if (val & PFUZE100_FUSE_POR_M)
+		programmed++;
+
+	if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_FUSE_POR3, 1, &val, 1) < 0) {
+		puts("i2c fuse_por read failed\n");
+		return programmed;
+	}
+	if (val & PFUZE100_FUSE_POR_M)
+		programmed++;
+
+	switch (programmed) {
+	case 0:
+		printf("PMIC: not programmed\n");
+		break;
+	case 3:
+		printf("PMIC: programmed\n");
+		break;
+	default:
+		printf("PMIC: undefined programming state\n");
+		break;
+	}
+
+	/* The following is needed during production */
+	if (programmed != 3) {
+		/* set VGEN1 to 1.2V */
+		val = PFUZE100_VGEN1_VAL;
+		if (i2c_write(PFUZE100_I2C_ADDR, PFUZE100_VGEN1CTL, 1,
+			      &val, 1)) {
+			puts("i2c write failed\n");
+			return programmed;
+		}
+
+		/* set SWBST to 5.0V */
+		val = PFUZE100_SWBST_VAL;
+		if (i2c_write(PFUZE100_I2C_ADDR, PFUZE100_SWBSTCTL, 1,
+			      &val, 1)) {
+			puts("i2c write failed\n");
+		}
+	}
+	return programmed;
+}
+
+int pf0100_prog(void)
+{
+	unsigned char bus = 1;
+	unsigned char val;
+	unsigned int i;
+
+	if (pmic_init() == 3) {
+		puts("PMIC already programmed, exiting\n");
+		return CMD_RET_FAILURE;
+	}
+	/* set up gpio to manipulate vprog, initially off */
+	imx_iomux_v3_setup_multiple_pads(pmic_prog_pads,
+					 ARRAY_SIZE(pmic_prog_pads));
+	gpio_direction_output(PMIC_PROG_VOLTAGE, 0);
+
+	if (!((0 == i2c_set_bus_num(bus)) &&
+	      (0 == i2c_probe(PFUZE100_I2C_ADDR)))) {
+		puts("i2c bus failed\n");
+		return CMD_RET_FAILURE;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(pmic_otp_prog); i++) {
+		switch (pmic_otp_prog[i].cmd) {
+		case pmic_i2c:
+			val = (unsigned char) (pmic_otp_prog[i].value & 0xff);
+			if (i2c_write(PFUZE100_I2C_ADDR, pmic_otp_prog[i].reg,
+				      1, &val, 1)) {
+				printf("i2c write failed, reg 0x%2x, value 0x%2x\n",
+				       pmic_otp_prog[i].reg, val);
+				return CMD_RET_FAILURE;
+			}
+			break;
+		case pmic_delay:
+			udelay(pmic_otp_prog[i].value * 1000);
+			break;
+		case pmic_vpgm:
+			gpio_direction_output(PMIC_PROG_VOLTAGE,
+					      pmic_otp_prog[i].value);
+			break;
+		case pmic_pwr:
+			/* TODO */
+			break;
+		}
+	}
+	return CMD_RET_SUCCESS;
+}
+
+int do_pf0100_prog(cmd_tbl_t *cmdtp, int flag, int argc,
+		char * const argv[])
+{
+	int ret;
+	puts("Programming PMIC OTP...");
+	ret = pf0100_prog();
+	if (ret == CMD_RET_SUCCESS)
+		puts("done.\n");
+	else
+		puts("failed.\n");
+	return ret;
+}
+
+U_BOOT_CMD(
+	pf0100_otp_prog, 1, 0, do_pf0100_prog,
+	"Program the OTP fuses on the PMIC PF0100",
+	""
+);

board/toradex/apalis_imx6/pf0100.h

@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2014-2016, Toradex AG
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/*
+ * Helpers for Freescale PMIC PF0100
+*/
+
+#ifndef PF0100_H_
+#define PF0100_H_
+
+/* 7-bit I2C bus slave address */
+#define PFUZE100_I2C_ADDR		(0x08)
+/* Register Addresses */
+#define PFUZE100_DEVICEID		(0x0)
+#define PFUZE100_REVID			(0x3)
+#define PFUZE100_SW1AMODE		(0x23)
+#define PFUZE100_SW1ACON		36
+#define PFUZE100_SW1ACON_SPEED_VAL	(0x1<<6)	/*default */
+#define PFUZE100_SW1ACON_SPEED_M	(0x3<<6)
+#define PFUZE100_SW1CCON		49
+#define PFUZE100_SW1CCON_SPEED_VAL	(0x1<<6)	/*default */
+#define PFUZE100_SW1CCON_SPEED_M	(0x3<<6)
+#define PFUZE100_SW1AVOL		32
+#define PFUZE100_SW1AVOL_VSEL_M		(0x3f<<0)
+#define PFUZE100_SW1CVOL		46
+#define PFUZE100_SW1CVOL_VSEL_M		(0x3f<<0)
+#define PFUZE100_VGEN1CTL		(0x6c)
+#define PFUZE100_VGEN1_VAL		(0x30 + 0x08) /* Always ON, 1.2V */
+#define PFUZE100_SWBSTCTL		(0x66)
+/* Always ON, Auto Switching Mode, 5.0V */
+#define PFUZE100_SWBST_VAL		(0x40 + 0x08 + 0x00)
+
+/* chooses the extended page (registers 0x80..0xff) */
+#define PFUZE100_PAGE_REGISTER		0x7f
+#define PFUZE100_PAGE_REGISTER_PAGE_M	(0x1f << 0)
+#define PFUZE100_PAGE_REGISTER_PAGE1	(0x01 & PFUZE100_PAGE_REGISTER_PAGE_M)
+#define PFUZE100_PAGE_REGISTER_PAGE2	(0x02 & PFUZE100_PAGE_REGISTER_PAGE_M)
+
+/* extended page 1 */
+#define PFUZE100_FUSE_POR1		0xe4
+#define PFUZE100_FUSE_POR2		0xe5
+#define PFUZE100_FUSE_POR3		0xe6
+#define PFUZE100_FUSE_POR_M		(0x1 << 1)
+
+
+/* output some informational messages, return the number FUSE_POR=1 */
+/* i.e. 0: unprogrammed, 3: programmed, other: undefined prog. state */
+unsigned pmic_init(void);
+
+/* programmes OTP fuses to values required on a Toradex Apalis iMX6 */
+int pf0100_prog(void);
+
+#endif /* PF0100_H_ */

board/toradex/apalis_imx6/pf0100_otp.inc

@@ -0,0 +1,191 @@
+/*
+ * Copyright (C) 2014-2016, Toradex AG
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+// Register Output for PF0100 programmer
+// Customer: Toradex AG
+// Program: Apalis iMX6
+// Sample marking:
+// Date: 12.02.2014
+// Time: 17:16:41
+// Generated from Spreadsheet Revision: P1.8
+
+/* sed commands to get from programmer script to struct */
+/* sed -e 's/^WRITE_I2C:\(..\):\(..\)/\{pmic_i2c, 0x\1, 0x\2\},/g' -e 's/^DELAY:\([0-9]*\)/\{pmic_delay, 0, \1\},/g' pf0100_otp.txt > pf0100_otp.inc
+   sed -i -e 's/^VPGM:ON/\{pmic_vpgm, 0, 1},/g' -e 's/^VPGM:OFF/\{pmic_vpgm, 0, 0},/g' pf0100_otp.inc
+   sed -i -e 's/^PWRON: HIGH/\{pmic_pwr, 0, 1},/g' -e 's/^PWRON:LOW/\{pmic_pwr, 0, 0},/g' pf0100_otp.inc */
+
+enum { pmic_i2c, pmic_delay, pmic_vpgm, pmic_pwr };
+struct pmic_otp_prog_t{
+	unsigned char cmd;
+	unsigned char reg;
+	unsigned short value;
+};
+
+struct pmic_otp_prog_t pmic_otp_prog[] = {
+{pmic_i2c, 0x7F, 0x01}, // Access FSL EXT Page 1
+{pmic_i2c, 0xA0, 0x2B}, // Auto gen from Row94
+{pmic_i2c, 0xA1, 0x01}, // Auto gen from Row95
+{pmic_i2c, 0xA2, 0x05}, // Auto gen from Row96
+{pmic_i2c, 0xA8, 0x2B}, // Auto gen from Row102
+{pmic_i2c, 0xA9, 0x02}, // Auto gen from Row103
+{pmic_i2c, 0xAA, 0x01}, // Auto gen from Row104
+{pmic_i2c, 0xAC, 0x18}, // Auto gen from Row106
+{pmic_i2c, 0xAE, 0x01}, // Auto gen from Row108
+{pmic_i2c, 0xB0, 0x2C}, // Auto gen from Row110
+{pmic_i2c, 0xB1, 0x04}, // Auto gen from Row111
+{pmic_i2c, 0xB2, 0x01}, // Auto gen from Row112
+{pmic_i2c, 0xB4, 0x2C}, // Auto gen from Row114
+{pmic_i2c, 0xB5, 0x04}, // Auto gen from Row115
+{pmic_i2c, 0xB6, 0x01}, // Auto gen from Row116
+{pmic_i2c, 0xB8, 0x18}, // Auto gen from Row118
+{pmic_i2c, 0xBA, 0x01}, // Auto gen from Row120
+{pmic_i2c, 0xBD, 0x1F}, // Auto gen from Row123
+{pmic_i2c, 0xC0, 0x06}, // Auto gen from Row126
+{pmic_i2c, 0xC4, 0x04}, // Auto gen from Row130
+{pmic_i2c, 0xC8, 0x0E}, // Auto gen from Row134
+{pmic_i2c, 0xC9, 0x08}, // Auto gen from Row135
+{pmic_i2c, 0xCC, 0x0E}, // Auto gen from Row138
+{pmic_i2c, 0xCD, 0x05}, // Auto gen from Row139
+{pmic_i2c, 0xD0, 0x0C}, // Auto gen from Row142
+{pmic_i2c, 0xD1, 0x05}, // Auto gen from Row143
+{pmic_i2c, 0xD5, 0x07}, // Auto gen from Row147
+{pmic_i2c, 0xD8, 0x07}, // Auto gen from Row150
+{pmic_i2c, 0xD9, 0x06}, // Auto gen from Row151
+{pmic_i2c, 0xDC, 0x0A}, // Auto gen from Row154
+{pmic_i2c, 0xDD, 0x03}, // Auto gen from Row155
+{pmic_i2c, 0xE0, 0x07}, // Auto gen from Row158
+
+#if 0 /* TBB mode */
+{pmic_i2c, 0xE4, 0x80}, // TBB_POR = 1
+{pmic_delay, 0, 10},
+#else
+// Write OTP
+{pmic_i2c, 0xE4, 0x02}, // FUSE POR1=1
+{pmic_i2c, 0xE5, 0x02}, // FUSE POR2=1
+{pmic_i2c, 0xE6, 0x02}, // FUSE POR3=1
+{pmic_i2c, 0xF0, 0x1F}, // Enable ECC for fuse banks 1 to 5 by writing to OTP EN ECC0 register
+{pmic_i2c, 0xF1, 0x1F}, // Enable ECC for fuse banks 6 to 10 by writing to OTP EN ECC1 register
+{pmic_i2c, 0x7F, 0x02}, // Access PF0100 EXT Page2
+{pmic_i2c, 0xD0, 0x1F}, // Set Auto ECC for fuse banks 1 to 5 by writing to OTP AUTO ECC0 register
+{pmic_i2c, 0xD1, 0x1F}, // Set Auto ECC for fuse banks 6 to 10 by writing to OTP AUTO ECC1 register
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF1, 0x00}, // Reset Bank 1 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF2, 0x00}, // Reset Bank 2 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF3, 0x00}, // Reset Bank 3 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF4, 0x00}, // Reset Bank 4 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF5, 0x00}, // Reset Bank 5 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF6, 0x00}, // Reset Bank 6 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF7, 0x00}, // Reset Bank 7 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF8, 0x00}, // Reset Bank 8 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF9, 0x00}, // Reset Bank 9 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xFA, 0x00}, // Reset Bank 10 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+{pmic_vpgm, 0, 1}, // Turn ON 8V SWBST
+//VPGM:DOWN:n
+//VPGM:UP:n
+{pmic_delay, 0, 500}, // Adds 500msec delay to allow VPGM time to ramp up
+//-----------------------------------------------------------------------------------
+// PF0100 OTP MANUAL-PROGRAMMING (BANK 1 thru 10)
+//-----------------------------------------------------------------------------------
+// BANK 1
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF1, 0x00}, // Reset Bank 1 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF1, 0x03}, // Set Bank 1 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF1, 0x0B}, // Set Bank 1 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xF1, 0x03}, // Reset Bank 1 ANTIFUSE_EN
+{pmic_i2c, 0xF1, 0x00}, // Reset Bank 1 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+// BANK 2
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF2, 0x00}, // Reset Bank 2 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF2, 0x03}, // Set Bank 2 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF2, 0x0B}, // Set Bank 2 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xF2, 0x03}, // Reset Bank 2 ANTIFUSE_EN
+{pmic_i2c, 0xF2, 0x00}, // Reset Bank 2 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+// BANK 3
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF3, 0x00}, // Reset Bank 3 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF3, 0x03}, // Set Bank 3 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF3, 0x0B}, // Set Bank 3 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xF3, 0x03}, // Reset Bank 3 ANTIFUSE_EN
+{pmic_i2c, 0xF3, 0x00}, // Reset Bank 3 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+// BANK 4
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF4, 0x00}, // Reset Bank 4 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF4, 0x03}, // Set Bank 4 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF4, 0x0B}, // Set Bank 4 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xF4, 0x03}, // Reset Bank 4 ANTIFUSE_EN
+{pmic_i2c, 0xF4, 0x00}, // Reset Bank 4 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+// BANK 5
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF5, 0x00}, // Reset Bank 5 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF5, 0x03}, // Set Bank 5 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF5, 0x0B}, // Set Bank 5 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xF5, 0x03}, // Reset Bank 5 ANTIFUSE_EN
+{pmic_i2c, 0xF5, 0x00}, // Reset Bank 5 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+// BANK 6
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF6, 0x00}, // Reset Bank 6 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF6, 0x03}, // Set Bank 6 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF6, 0x0B}, // Set Bank 6 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xF6, 0x03}, // Reset Bank 6 ANTIFUSE_EN
+{pmic_i2c, 0xF6, 0x00}, // Reset Bank 6 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+// BANK 7
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF7, 0x00}, // Reset Bank 7 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF7, 0x03}, // Set Bank 7 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF7, 0x0B}, // Set Bank 7 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xF7, 0x03}, // Reset Bank 7 ANTIFUSE_EN
+{pmic_i2c, 0xF7, 0x00}, // Reset Bank 7 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+// BANK 8
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF8, 0x00}, // Reset Bank 8 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF8, 0x03}, // Set Bank 8 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF8, 0x0B}, // Set Bank 8 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xF8, 0x03}, // Reset Bank 8 ANTIFUSE_EN
+{pmic_i2c, 0xF8, 0x00}, // Reset Bank 8 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+// BANK 9
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF9, 0x00}, // Reset Bank 9 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF9, 0x03}, // Set Bank 9 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF9, 0x0B}, // Set Bank 9 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xF9, 0x03}, // Reset Bank 9 ANTIFUSE_EN
+{pmic_i2c, 0xF9, 0x00}, // Reset Bank 9 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+// BANK 10
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xFA, 0x00}, // Reset Bank 10 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xFA, 0x03}, // Set Bank 10 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xFA, 0x0B}, // Set Bank 10 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xFA, 0x03}, // Reset Bank 10 ANTIFUSE_EN
+{pmic_i2c, 0xFA, 0x00}, // Reset Bank 10 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+{pmic_vpgm, 0, 0}, // Turn off 8V SWBST
+{pmic_delay, 0, 500}, // Adds delay to allow VPGM to bleed off
+{pmic_i2c, 0xD0, 0x00}, // Clear
+{pmic_i2c, 0xD1, 0x00}, // Clear
+{pmic_pwr, 0, 0}, // PWRON LOW to reload new OTP data
+{pmic_delay, 0, 500},
+{pmic_pwr, 0, 1},
+#endif
+};

board/toradex/apalis_t30/apalis_t30.c

@@ -14,6 +14,7 @@
 #include <asm/io.h>
 #include <dm.h>
 #include <i2c.h>
+#include "../common/tdx-common.h"
 
 #include "pinmux-config-apalis_t30.h"
 
@@ -39,6 +40,13 @@ int checkboard(void)
 	return 0;
 }
 
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+int ft_board_setup(void *blob, bd_t *bd)
+{
+	return ft_common_board_setup(blob, bd);
+}
+#endif
+
 /*
  * Routine: pinmux_init
  * Description: Do individual peripheral pinmux configs

board/toradex/colibri_imx6/800mhz_2x64mx16.cfg

@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2013 Boundary Devices
+ * Copyright (C) 2014-2016, Toradex AG
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+DATA 4, MX6_MMDC_P0_MDPDC, 0x0002002D
+DATA 4, MX6_MMDC_P0_MDCFG0, 0x2C305503
+DATA 4, MX6_MMDC_P0_MDCFG1, 0xB66D8D63
+DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB
+DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2
+DATA 4, MX6_MMDC_P0_MDOR, 0x00301023
+DATA 4, MX6_MMDC_P0_MDOTC, 0x00333030
+DATA 4, MX6_MMDC_P0_MDPDC, 0x0002556D
+/* CS0 End: 7MSB of ((0x10000000 + 512M) -1) >> 25 */
+DATA 4, MX6_MMDC_P0_MDASP, 0x00000017
+/* DDR3 DATA BUS SIZE: 64BIT */
+/* DATA 4, MX6_MMDC_P0_MDCTL, 0x821A0000 */
+/* DDR3 DATA BUS SIZE: 32BIT */
+DATA 4, MX6_MMDC_P0_MDCTL, 0x82190000
+
+/* Write commands to DDR */
+/* Load Mode Registers */
+/* TODO Use Auto Self-Refresh mode (Extended Temperature)*/
+/* DATA 4, MX6_MMDC_P0_MDSCR, 0x04408032 */
+DATA 4, MX6_MMDC_P0_MDSCR, 0x04008032
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031
+DATA 4, MX6_MMDC_P0_MDSCR, 0x13208030
+/* ZQ calibration */
+DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040
+
+DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003
+DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003
+DATA 4, MX6_MMDC_P0_MDREF, 0x00005800
+
+DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00000000
+DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00000000
+
+DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x42360232
+DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x021F022A
+DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x421E0224
+DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x02110218
+
+DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x41434344
+DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x4345423E
+DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x39383339
+DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x3E363930
+
+DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x00340039
+DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x002C002D
+DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x00120019
+DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x0012002D
+
+DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800
+DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000
+DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006

board/toradex/colibri_imx6/800mhz_4x64mx16.cfg

@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2013 Boundary Devices
+ * Copyright (C) 2014-2016, Toradex AG
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+DATA 4, MX6_MMDC_P0_MDPDC, 0x0002002D
+DATA 4, MX6_MMDC_P0_MDCFG0, 0x2C305503
+DATA 4, MX6_MMDC_P0_MDCFG1, 0xB66D8D63
+DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB
+DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2
+DATA 4, MX6_MMDC_P0_MDOR, 0x00301023
+DATA 4, MX6_MMDC_P0_MDOTC, 0x00333030
+DATA 4, MX6_MMDC_P0_MDPDC, 0x0002556D
+/* CS0 End: 7MSB of ((0x10000000 + 512M) -1) >> 25 */
+DATA 4, MX6_MMDC_P0_MDASP, 0x00000017
+/* DDR3 DATA BUS SIZE: 64BIT */
+DATA 4, MX6_MMDC_P0_MDCTL, 0x821A0000
+/* DDR3 DATA BUS SIZE: 32BIT */
+/* DATA 4, MX6_MMDC_P0_MDCTL, 0x82190000 */
+
+/* Write commands to DDR */
+/* Load Mode Registers */
+/* TODO Use Auto Self-Refresh mode (Extended Temperature)*/
+/* DATA 4, MX6_MMDC_P0_MDSCR, 0x04408032 */
+DATA 4, MX6_MMDC_P0_MDSCR, 0x04008032
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031
+DATA 4, MX6_MMDC_P0_MDSCR, 0x13208030
+/* ZQ calibration */
+DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040
+
+DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003
+DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003
+DATA 4, MX6_MMDC_P0_MDREF, 0x00005800
+
+DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00000000
+DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00000000
+
+DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x42360232
+DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x021F022A
+DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x421E0224
+DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x02110218
+
+DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x41434344
+DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x4345423E
+DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x39383339
+DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x3E363930
+
+DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x00340039
+DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x002C002D
+DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x00120019
+DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x0012002D
+
+DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800
+DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000
+DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006

board/toradex/colibri_imx6/Kconfig

@@ -0,0 +1,44 @@
+if TARGET_COLIBRI_IMX6
+
+config SYS_BOARD
+	default "colibri_imx6"
+
+config SYS_CONFIG_NAME
+	default "colibri_imx6"
+
+config SYS_CPU
+	default "armv7"
+
+config SYS_SOC
+	default "mx6"
+
+config SYS_VENDOR
+	default "toradex"
+
+config TDX_CFG_BLOCK
+	default y
+
+config TDX_HAVE_MMC
+	default y
+
+config TDX_CFG_BLOCK_DEV
+	default "0"
+
+config TDX_CFG_BLOCK_PART
+	default "1"
+
+# Toradex config block in eMMC, at the end of 1st "boot sector"
+config TDX_CFG_BLOCK_OFFSET
+	default "-512"
+
+config TDX_CMD_IMX_MFGR
+	bool "Enable factory testing commands for Toradex iMX 6 modules"
+	help
+	  This adds the commands
+	    pf0100_otp_prog - Program the OTP fuses on the PMIC PF0100
+	  If executed on already fused modules it doesn't change any fuse setting.
+	default y
+
+source "board/toradex/common/Kconfig"
+
+endif

board/toradex/colibri_imx6/MAINTAINERS

@@ -0,0 +1,8 @@
+Colibri iMX6
+M:	Max Krummenacher <max.krummenacher@toradex.com>
+W:	http://developer.toradex.com/software/linux/linux-software
+S:	Maintained
+F:	board/toradex/colibri_imx6/
+F:	include/configs/colibri_imx6.h
+F:	configs/colibri_imx6_defconfig
+F:	configs/colibri_imx6_nospl_defconfig

board/toradex/colibri_imx6/Makefile

@@ -0,0 +1,5 @@
+# Copyright (c) 2012-2014 Toradex, Inc.
+# SPDX-License-Identifier:      GPL-2.0+
+
+obj-y  := colibri_imx6.o do_fuse.o
+obj-$(CONFIG_TDX_CMD_IMX_MFGR)  += pf0100.o

board/toradex/colibri_imx6/clocks.cfg

@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2013 Boundary Devices
+ * Copyright (C) 2014-2016, Toradex AG
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type           Address        Value
+ *
+ * where:
+ *      Addr-type register length (1,2 or 4 bytes)
+ *      Address   absolute address of the register
+ *      value     value to be stored in the register
+ */
+
+/* set the default clock gate to save power */
+DATA 4, CCM_CCGR0, 0x00C03F3F
+DATA 4, CCM_CCGR1, 0x0030FC03
+DATA 4, CCM_CCGR2, 0x0FFFC000
+DATA 4, CCM_CCGR3, 0x3FF00000
+DATA 4, CCM_CCGR4, 0x00FFF300
+DATA 4, CCM_CCGR5, 0x0F0000C3
+DATA 4, CCM_CCGR6, 0x000003FF
+
+/* enable AXI cache for VDOA/VPU/IPU */
+DATA 4, MX6_IOMUXC_GPR4, 0xF00000CF
+/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
+DATA 4, MX6_IOMUXC_GPR6, 0x007F007F
+DATA 4, MX6_IOMUXC_GPR7, 0x007F007F
+
+/*
+ * Setup CCM_CCOSR register as follows:
+ *
+ * cko1_en  = 1	   --> CKO1 enabled
+ * cko1_div = 111  --> divide by 8
+ * cko1_sel = 1011 --> ahb_clk_root
+ *
+ * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz
+ */
+DATA 4, CCM_CCOSR, 0x000000fb

board/toradex/colibri_imx6/colibri_imx6.cfg

@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2013 Boundary Devices
+ * Copyright (C) 2014 Toradex AG
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * Refer doc/README.imximage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+/* image version */
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
+BOOT_FROM      sd
+
+#define __ASSEMBLY__
+#include <config.h>
+#include "asm/arch/mx6-ddr.h"
+#include "asm/arch/iomux.h"
+#include "asm/arch/crm_regs.h"
+
+#include "ddr-setup.cfg"
+
+#if CONFIG_DDR_MB == 256
+#include "800mhz_2x64mx16.cfg"
+#elif CONFIG_DDR_MB == 512
+#include "800mhz_4x64mx16.cfg"
+#else
+#error "unknown DDR size"
+#endif
+
+#include "clocks.cfg"

board/toradex/colibri_imx6/ddr-setup.cfg

@@ -0,0 +1,98 @@
+/*
+ * Copyright (C) 2013 Boundary Devices
+ * Copyright (C) 2014-2016, Toradex AG
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type           Address        Value
+ *
+ * where:
+ *      Addr-type register length (1,2 or 4 bytes)
+ *      Address   absolute address of the register
+ *      value     value to be stored in the register
+ */
+
+/*
+ * DDR3 settings
+ * MX6Q    ddr is limited to 1066 Mhz	currently 1056 MHz(528 MHz clock),
+ *	   memory bus width: 64 bits	x16/x32/x64
+ * MX6DL   ddr is limited to 800 MHz(400 MHz clock)
+ *	   memory bus width: 64 bits	x16/x32/x64
+ * MX6SOLO ddr is limited to 800 MHz(400 MHz clock)
+ *	   memory bus width: 32 bits	x16/x32
+ */
+DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000030
+
+DATA 4, MX6_IOM_GRP_B0DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B1DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B2DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B3DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B4DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B5DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B6DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B7DS, 0x00000030
+DATA 4, MX6_IOM_GRP_ADDDS, 0x00000030
+/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
+DATA 4, MX6_IOM_GRP_CTLDS, 0x00000030
+
+DATA 4, MX6_IOM_DRAM_DQM0, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM1, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM2, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM3, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM4, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM5, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM6, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM7, 0x00020030
+
+DATA 4, MX6_IOM_DRAM_CAS, 0x00020030
+DATA 4, MX6_IOM_DRAM_RAS, 0x00020030
+DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00020030
+DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00020030
+
+DATA 4, MX6_IOM_DRAM_RESET, 0x00020030
+DATA 4, MX6_IOM_DRAM_SDCKE0, 0x00003000
+DATA 4, MX6_IOM_DRAM_SDCKE1, 0x00003000
+
+DATA 4, MX6_IOM_DRAM_SDODT0, 0x00003030
+DATA 4, MX6_IOM_DRAM_SDODT1, 0x00003030
+
+/* (differential input) */
+DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000
+/* (differential input) */
+DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000
+/* disable ddr pullups */
+DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000
+DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000
+/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
+DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000C0000
+
+/* Read data DQ Byte0-3 delay */
+DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333
+DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333
+DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333
+DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333
+DATA 4, MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333
+DATA 4, MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333
+DATA 4, MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333
+DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333
+
+/*
+ * MDMISC	mirroring	interleaved (row/bank/col)
+ */
+/* TODO: check what the RALAT field does */
+DATA 4, MX6_MMDC_P0_MDMISC, 0x00081740
+
+/*
+ * MDSCR	con_req
+ */
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000

board/toradex/colibri_imx6/do_fuse.c

@@ -0,0 +1,98 @@
+/*
+ * Copyright (C) 2014-2016, Toradex AG
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/*
+ * Helpers for i.MX OTP fusing during module production
+*/
+
+#include <common.h>
+#ifndef CONFIG_SPL_BUILD
+#include <console.h>
+#include <fuse.h>
+
+static int mfgr_fuse(void)
+{
+	unsigned val, val6;
+
+	fuse_sense(0, 5, &val);
+	printf("Fuse 0, 5: %8x\n", val);
+	fuse_sense(0, 6, &val6);
+	printf("Fuse 0, 6: %8x\n", val6);
+	fuse_sense(4, 3, &val);
+	printf("Fuse 4, 3: %8x\n", val);
+	fuse_sense(4, 2, &val);
+	printf("Fuse 4, 2: %8x\n", val);
+	if (val6 & 0x10) {
+		puts("BT_FUSE_SEL already fused, will do nothing\n");
+		return CMD_RET_FAILURE;
+	}
+	/* boot cfg */
+	fuse_prog(0, 5, 0x00005072);
+	/* BT_FUSE_SEL */
+	fuse_prog(0, 6, 0x00000010);
+	return CMD_RET_SUCCESS;
+}
+
+int do_mfgr_fuse(cmd_tbl_t *cmdtp, int flag, int argc,
+		char * const argv[])
+{
+	int ret;
+	puts("Fusing...\n");
+	ret = mfgr_fuse();
+	if (ret == CMD_RET_SUCCESS)
+		puts("done.\n");
+	else
+		puts("failed.\n");
+	return ret;
+}
+
+int do_updt_fuse(cmd_tbl_t *cmdtp, int flag, int argc,
+		char * const argv[])
+{
+	unsigned val;
+	int ret;
+	int confirmed = argc >= 1 && !strcmp(argv[1], "-y");
+
+	/* can be used in scripts for command availability check */
+	if (argc >= 1 && !strcmp(argv[1], "-n"))
+		return CMD_RET_SUCCESS;
+
+	/* boot cfg */
+	fuse_sense(0, 5, &val);
+	printf("Fuse 0, 5: %8x\n", val);
+	if (val & 0x10) {
+		puts("Fast boot mode already fused, no need to fuse\n");
+		return CMD_RET_SUCCESS;
+	}
+	if (!confirmed) {
+		puts("Warning: Programming fuses is an irreversible operation!\n"
+				"         Updating to fast boot mode prevents easy\n"
+				"         downgrading to previous BSP versions.\n"
+				"\nReally perform this fuse programming? <y/N>\n");
+		if (!confirm_yesno())
+			return CMD_RET_FAILURE;
+	}
+	puts("Fusing fast boot mode...\n");
+	ret = fuse_prog(0, 5, 0x00005072);
+	if (ret == CMD_RET_SUCCESS)
+		puts("done.\n");
+	else
+		puts("failed.\n");
+	return ret;
+}
+
+U_BOOT_CMD(
+	mfgr_fuse, 1, 0, do_mfgr_fuse,
+	"OTP fusing during module production",
+	""
+);
+
+U_BOOT_CMD(
+	updt_fuse, 2, 0, do_updt_fuse,
+	"OTP fusing during module update",
+	"updt_fuse [-n] [-y] - boot cfg fast boot mode fusing"
+);
+#endif /* CONFIG_SPL_BUILD */

board/toradex/colibri_imx6/pf0100.c

@@ -0,0 +1,211 @@
+/*
+ * Copyright (C) 2014-2016, Toradex AG
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/*
+ * Helpers for Freescale PMIC PF0100
+*/
+
+#include <common.h>
+#include <i2c.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/gpio.h>
+#include <asm/imx-common/iomux-v3.h>
+
+#include "pf0100_otp.inc"
+#include "pf0100.h"
+
+/* define for PMIC register dump */
+/*#define DEBUG */
+
+/* use GPIO: EXT_IO1 to switch on VPGM, ON: 1 */
+static iomux_v3_cfg_t const pmic_prog_pads[] = {
+	MX6_PAD_NANDF_D3__GPIO2_IO03 | MUX_PAD_CTRL(NO_PAD_CTRL),
+#	define PMIC_PROG_VOLTAGE IMX_GPIO_NR(2, 3)
+};
+
+unsigned pmic_init(void)
+{
+	unsigned programmed = 0;
+	uchar bus = 1;
+	uchar devid, revid, val;
+
+	puts("PMIC: ");
+	if (!((0 == i2c_set_bus_num(bus)) &&
+	      (0 == i2c_probe(PFUZE100_I2C_ADDR)))) {
+		puts("i2c bus failed\n");
+		return 0;
+	}
+	/* get device ident */
+	if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_DEVICEID, 1, &devid, 1) < 0) {
+		puts("i2c pmic devid read failed\n");
+		return 0;
+	}
+	if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_REVID, 1, &revid, 1) < 0) {
+		puts("i2c pmic revid read failed\n");
+		return 0;
+	}
+	printf("device id: 0x%.2x, revision id: 0x%.2x\n", devid, revid);
+
+#ifdef DEBUG
+	{
+		unsigned i, j;
+
+		for (i = 0; i < 16; i++)
+			printf("\t%x", i);
+		for (j = 0; j < 0x80; ) {
+			printf("\n%2x", j);
+			for (i = 0; i < 16; i++) {
+				i2c_read(PFUZE100_I2C_ADDR, j+i, 1, &val, 1);
+				printf("\t%2x", val);
+			}
+			j += 0x10;
+		}
+		printf("\nEXT Page 1");
+
+		val = PFUZE100_PAGE_REGISTER_PAGE1;
+		if (i2c_write(PFUZE100_I2C_ADDR, PFUZE100_PAGE_REGISTER, 1,
+			      &val, 1)) {
+			puts("i2c write failed\n");
+			return 0;
+		}
+
+		for (j = 0x80; j < 0x100; ) {
+			printf("\n%2x", j);
+			for (i = 0; i < 16; i++) {
+				i2c_read(PFUZE100_I2C_ADDR, j+i, 1, &val, 1);
+				printf("\t%2x", val);
+			}
+			j += 0x10;
+		}
+		printf("\nEXT Page 2");
+
+		val = PFUZE100_PAGE_REGISTER_PAGE2;
+		if (i2c_write(PFUZE100_I2C_ADDR, PFUZE100_PAGE_REGISTER, 1,
+			      &val, 1)) {
+			puts("i2c write failed\n");
+			return 0;
+		}
+
+		for (j = 0x80; j < 0x100; ) {
+			printf("\n%2x", j);
+			for (i = 0; i < 16; i++) {
+				i2c_read(PFUZE100_I2C_ADDR, j+i, 1, &val, 1);
+				printf("\t%2x", val);
+			}
+			j += 0x10;
+		}
+		printf("\n");
+	}
+#endif
+	/* get device programmed state */
+	val = PFUZE100_PAGE_REGISTER_PAGE1;
+	if (i2c_write(PFUZE100_I2C_ADDR, PFUZE100_PAGE_REGISTER, 1, &val, 1)) {
+		puts("i2c write failed\n");
+		return 0;
+	}
+	if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_FUSE_POR1, 1, &val, 1) < 0) {
+		puts("i2c fuse_por read failed\n");
+		return 0;
+	}
+	if (val & PFUZE100_FUSE_POR_M)
+		programmed++;
+
+	if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_FUSE_POR2, 1, &val, 1) < 0) {
+		puts("i2c fuse_por read failed\n");
+		return programmed;
+	}
+	if (val & PFUZE100_FUSE_POR_M)
+		programmed++;
+
+	if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_FUSE_POR3, 1, &val, 1) < 0) {
+		puts("i2c fuse_por read failed\n");
+		return programmed;
+	}
+	if (val & PFUZE100_FUSE_POR_M)
+		programmed++;
+
+	switch (programmed) {
+	case 0:
+		printf("PMIC: not programmed\n");
+		break;
+	case 3:
+		printf("PMIC: programmed\n");
+		break;
+	default:
+		printf("PMIC: undefined programming state\n");
+		break;
+	}
+
+	return programmed;
+}
+
+int pf0100_prog(void)
+{
+	unsigned char bus = 1;
+	unsigned char val;
+	unsigned int i;
+
+	if (pmic_init() == 3) {
+		puts("PMIC already programmed, exiting\n");
+		return CMD_RET_FAILURE;
+	}
+	/* set up gpio to manipulate vprog, initially off */
+	imx_iomux_v3_setup_multiple_pads(pmic_prog_pads,
+					 ARRAY_SIZE(pmic_prog_pads));
+	gpio_direction_output(PMIC_PROG_VOLTAGE, 0);
+
+	if (!((0 == i2c_set_bus_num(bus)) &&
+	      (0 == i2c_probe(PFUZE100_I2C_ADDR)))) {
+		puts("i2c bus failed\n");
+		return CMD_RET_FAILURE;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(pmic_otp_prog); i++) {
+		switch (pmic_otp_prog[i].cmd) {
+		case pmic_i2c:
+			val = (unsigned char) (pmic_otp_prog[i].value & 0xff);
+			if (i2c_write(PFUZE100_I2C_ADDR, pmic_otp_prog[i].reg,
+				      1, &val, 1)) {
+				printf("i2c write failed, reg 0x%2x, value 0x%2x\n",
+				       pmic_otp_prog[i].reg, val);
+				return CMD_RET_FAILURE;
+			}
+			break;
+		case pmic_delay:
+			udelay(pmic_otp_prog[i].value * 1000);
+			break;
+		case pmic_vpgm:
+			gpio_direction_output(PMIC_PROG_VOLTAGE,
+					      pmic_otp_prog[i].value);
+			break;
+		case pmic_pwr:
+			/* TODO */
+			break;
+		}
+	}
+	return CMD_RET_SUCCESS;
+}
+
+int do_pf0100_prog(cmd_tbl_t *cmdtp, int flag, int argc,
+		char * const argv[])
+{
+	int ret;
+	puts("Programming PMIC OTP...");
+	ret = pf0100_prog();
+	if (ret == CMD_RET_SUCCESS)
+		puts("done.\n");
+	else
+		puts("failed.\n");
+	return ret;
+}
+
+U_BOOT_CMD(
+	pf0100_otp_prog, 1, 0, do_pf0100_prog,
+	"Program the OTP fuses on the PMIC PF0100",
+	""
+);

board/toradex/colibri_imx6/pf0100.h

@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2014-2016, Toradex AG
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/*
+ * Helpers for Freescale PMIC PF0100
+*/
+
+#ifndef PF0100_H_
+#define PF0100_H_
+
+/* 7-bit I2C bus slave address */
+#define PFUZE100_I2C_ADDR		(0x08)
+/* Register Addresses */
+#define PFUZE100_DEVICEID		(0x0)
+#define PFUZE100_REVID			(0x3)
+#define PFUZE100_SW1AMODE		(0x23)
+#define PFUZE100_SW1ACON		36
+#define PFUZE100_SW1ACON_SPEED_VAL	(0x1<<6)	/*default */
+#define PFUZE100_SW1ACON_SPEED_M	(0x3<<6)
+#define PFUZE100_SW1CCON		49
+#define PFUZE100_SW1CCON_SPEED_VAL	(0x1<<6)	/*default */
+#define PFUZE100_SW1CCON_SPEED_M	(0x3<<6)
+#define PFUZE100_SW1AVOL		32
+#define PFUZE100_SW1AVOL_VSEL_M		(0x3f<<0)
+#define PFUZE100_SW1CVOL		46
+#define PFUZE100_SW1CVOL_VSEL_M		(0x3f<<0)
+#define PFUZE100_VGEN1CTL		(0x6c)
+#define PFUZE100_VGEN1_VAL		(0x30 + 0x08) /* Always ON, 1.2V */
+#define PFUZE100_SWBSTCTL		(0x66)
+/* Always ON, Auto Switching Mode, 5.0V */
+#define PFUZE100_SWBST_VAL		(0x40 + 0x08 + 0x00)
+
+/* chooses the extended page (registers 0x80..0xff) */
+#define PFUZE100_PAGE_REGISTER		0x7f
+#define PFUZE100_PAGE_REGISTER_PAGE_M	(0x1f << 0)
+#define PFUZE100_PAGE_REGISTER_PAGE1	(0x01 & PFUZE100_PAGE_REGISTER_PAGE_M)
+#define PFUZE100_PAGE_REGISTER_PAGE2	(0x02 & PFUZE100_PAGE_REGISTER_PAGE_M)
+
+/* extended page 1 */
+#define PFUZE100_FUSE_POR1		0xe4
+#define PFUZE100_FUSE_POR2		0xe5
+#define PFUZE100_FUSE_POR3		0xe6
+#define PFUZE100_FUSE_POR_M		(0x1 << 1)
+
+
+/* output some informational messages, return the number FUSE_POR=1 */
+/* i.e. 0: unprogrammed, 3: programmed, other: undefined prog. state */
+unsigned pmic_init(void);
+
+/* programmes OTP fuses to values required on a Toradex Apalis iMX6 */
+int pf0100_prog(void);
+
+#endif /* PF0100_H_ */

board/toradex/colibri_imx6/pf0100_otp.inc

@@ -0,0 +1,189 @@
+/*
+ * Copyright (C) 2014-2016, Toradex AG
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+// Register Output for PF0100 programmer
+// Customer: Toradex AG
+// Program: Colibri iMX6
+// Sample marking:
+// Date: 24.07.2015
+// Time: 10:52:58
+// Generated from Spreadsheet Revision: P1.8
+
+/* sed commands to get from programmer script to struct */
+/* sed -e 's/^WRITE_I2C:\(..\):\(..\)/\{pmic_i2c, 0x\1, 0x\2\},/g' -e 's/^DELAY:\([0-9]*\)/\{pmic_delay, 0, \1\},/g' pf0100_otp_Colibri_iMX6.txt > pf0100_otp.inc
+   sed -i -e 's/^VPGM:ON/\{pmic_vpgm, 0, 1},/g' -e 's/^VPGM:OFF/\{pmic_vpgm, 0, 0},/g' pf0100_otp.inc
+   sed -i -e 's/^PWRON: HIGH/\{pmic_pwr, 0, 1},/g' -e 's/^PWRON:LOW/\{pmic_pwr, 0, 0},/g' pf0100_otp.inc */
+
+enum { pmic_i2c, pmic_delay, pmic_vpgm, pmic_pwr };
+struct pmic_otp_prog_t{
+	unsigned char cmd;
+	unsigned char reg;
+	unsigned short value;
+};
+
+struct pmic_otp_prog_t pmic_otp_prog[] = {
+{pmic_i2c, 0x7F, 0x01}, // Access FSL EXT Page 1
+{pmic_i2c, 0xA0, 0x2B}, // Auto gen from Row94
+{pmic_i2c, 0xA1, 0x01}, // Auto gen from Row95
+{pmic_i2c, 0xA2, 0x05}, // Auto gen from Row96
+{pmic_i2c, 0xA8, 0x2B}, // Auto gen from Row102
+{pmic_i2c, 0xA9, 0x02}, // Auto gen from Row103
+{pmic_i2c, 0xAA, 0x01}, // Auto gen from Row104
+{pmic_i2c, 0xAC, 0x18}, // Auto gen from Row106
+{pmic_i2c, 0xAE, 0x01}, // Auto gen from Row108
+{pmic_i2c, 0xB0, 0x2C}, // Auto gen from Row110
+{pmic_i2c, 0xB1, 0x04}, // Auto gen from Row111
+{pmic_i2c, 0xB2, 0x01}, // Auto gen from Row112
+{pmic_i2c, 0xB4, 0x2C}, // Auto gen from Row114
+{pmic_i2c, 0xB5, 0x04}, // Auto gen from Row115
+{pmic_i2c, 0xB6, 0x01}, // Auto gen from Row116
+{pmic_i2c, 0xB8, 0x18}, // Auto gen from Row118
+{pmic_i2c, 0xBA, 0x01}, // Auto gen from Row120
+{pmic_i2c, 0xBD, 0x0E}, // Auto gen from Row123
+{pmic_i2c, 0xC0, 0x06}, // Auto gen from Row126
+{pmic_i2c, 0xC4, 0x04}, // Auto gen from Row130
+{pmic_i2c, 0xC8, 0x0E}, // Auto gen from Row134
+{pmic_i2c, 0xCC, 0x0E}, // Auto gen from Row138
+{pmic_i2c, 0xCD, 0x05}, // Auto gen from Row139
+{pmic_i2c, 0xD0, 0x0C}, // Auto gen from Row142
+{pmic_i2c, 0xD5, 0x07}, // Auto gen from Row147
+{pmic_i2c, 0xD8, 0x07}, // Auto gen from Row150
+{pmic_i2c, 0xD9, 0x06}, // Auto gen from Row151
+{pmic_i2c, 0xDC, 0x0A}, // Auto gen from Row154
+{pmic_i2c, 0xDD, 0x03}, // Auto gen from Row155
+{pmic_i2c, 0xE0, 0x05}, // Auto gen from Row158
+
+#if 0 /* TBB mode */
+{pmic_i2c, 0xE4, 0x80}, // TBB_POR = 1
+{pmic_delay, 0, 10},
+#else
+// Write OTP
+{pmic_i2c, 0xE4, 0x02}, // FUSE POR1=1
+{pmic_i2c, 0xE5, 0x02}, // FUSE POR2=1
+{pmic_i2c, 0xE6, 0x02}, // FUSE POR3=1
+{pmic_i2c, 0xF0, 0x1F}, // Enable ECC for fuse banks 1 to 5 by writing to OTP EN ECC0 register
+{pmic_i2c, 0xF1, 0x1F}, // Enable ECC for fuse banks 6 to 10 by writing to OTP EN ECC1 register
+{pmic_i2c, 0x7F, 0x02}, // Access PF0100 EXT Page2
+{pmic_i2c, 0xD0, 0x1F}, // Set Auto ECC for fuse banks 1 to 5 by writing to OTP AUTO ECC0 register
+{pmic_i2c, 0xD1, 0x1F}, // Set Auto ECC for fuse banks 6 to 10 by writing to OTP AUTO ECC1 register
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF1, 0x00}, // Reset Bank 1 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF2, 0x00}, // Reset Bank 2 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF3, 0x00}, // Reset Bank 3 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF4, 0x00}, // Reset Bank 4 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF5, 0x00}, // Reset Bank 5 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF6, 0x00}, // Reset Bank 6 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF7, 0x00}, // Reset Bank 7 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF8, 0x00}, // Reset Bank 8 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF9, 0x00}, // Reset Bank 9 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xFA, 0x00}, // Reset Bank 10 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+{pmic_vpgm, 0, 1}, // Turn ON 8V SWBST
+//VPGM:DOWN:n
+//VPGM:UP:n
+{pmic_delay, 0, 500}, // Adds 500msec delay to allow VPGM time to ramp up
+//-----------------------------------------------------------------------------------
+// PF0100 OTP MANUAL-PROGRAMMING (BANK 1 thru 10)
+//-----------------------------------------------------------------------------------
+// BANK 1
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF1, 0x00}, // Reset Bank 1 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF1, 0x03}, // Set Bank 1 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF1, 0x0B}, // Set Bank 1 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xF1, 0x03}, // Reset Bank 1 ANTIFUSE_EN
+{pmic_i2c, 0xF1, 0x00}, // Reset Bank 1 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+// BANK 2
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF2, 0x00}, // Reset Bank 2 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF2, 0x03}, // Set Bank 2 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF2, 0x0B}, // Set Bank 2 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xF2, 0x03}, // Reset Bank 2 ANTIFUSE_EN
+{pmic_i2c, 0xF2, 0x00}, // Reset Bank 2 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+// BANK 3
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF3, 0x00}, // Reset Bank 3 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF3, 0x03}, // Set Bank 3 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF3, 0x0B}, // Set Bank 3 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xF3, 0x03}, // Reset Bank 3 ANTIFUSE_EN
+{pmic_i2c, 0xF3, 0x00}, // Reset Bank 3 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+// BANK 4
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF4, 0x00}, // Reset Bank 4 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF4, 0x03}, // Set Bank 4 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF4, 0x0B}, // Set Bank 4 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xF4, 0x03}, // Reset Bank 4 ANTIFUSE_EN
+{pmic_i2c, 0xF4, 0x00}, // Reset Bank 4 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+// BANK 5
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF5, 0x00}, // Reset Bank 5 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF5, 0x03}, // Set Bank 5 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF5, 0x0B}, // Set Bank 5 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xF5, 0x03}, // Reset Bank 5 ANTIFUSE_EN
+{pmic_i2c, 0xF5, 0x00}, // Reset Bank 5 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+// BANK 6
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF6, 0x00}, // Reset Bank 6 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF6, 0x03}, // Set Bank 6 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF6, 0x0B}, // Set Bank 6 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xF6, 0x03}, // Reset Bank 6 ANTIFUSE_EN
+{pmic_i2c, 0xF6, 0x00}, // Reset Bank 6 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+// BANK 7
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF7, 0x00}, // Reset Bank 7 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF7, 0x03}, // Set Bank 7 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF7, 0x0B}, // Set Bank 7 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xF7, 0x03}, // Reset Bank 7 ANTIFUSE_EN
+{pmic_i2c, 0xF7, 0x00}, // Reset Bank 7 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+// BANK 8
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF8, 0x00}, // Reset Bank 8 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF8, 0x03}, // Set Bank 8 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF8, 0x0B}, // Set Bank 8 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xF8, 0x03}, // Reset Bank 8 ANTIFUSE_EN
+{pmic_i2c, 0xF8, 0x00}, // Reset Bank 8 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+// BANK 9
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xF9, 0x00}, // Reset Bank 9 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF9, 0x03}, // Set Bank 9 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xF9, 0x0B}, // Set Bank 9 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xF9, 0x03}, // Reset Bank 9 ANTIFUSE_EN
+{pmic_i2c, 0xF9, 0x00}, // Reset Bank 9 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+// BANK 10
+//-----------------------------------------------------------------------------------
+{pmic_i2c, 0xFA, 0x00}, // Reset Bank 10 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xFA, 0x03}, // Set Bank 10 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+{pmic_i2c, 0xFA, 0x0B}, // Set Bank 10 ANTIFUSE_EN
+{pmic_delay, 0, 10}, // Allow time for bank programming to complete
+{pmic_i2c, 0xFA, 0x03}, // Reset Bank 10 ANTIFUSE_EN
+{pmic_i2c, 0xFA, 0x00}, // Reset Bank 10 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
+//-----------------------------------------------------------------------------------
+{pmic_vpgm, 0, 0}, // Turn off 8V SWBST
+{pmic_delay, 0, 500}, // Adds delay to allow VPGM to bleed off
+{pmic_i2c, 0xD0, 0x00}, // Clear
+{pmic_i2c, 0xD1, 0x00}, // Clear
+{pmic_pwr, 0, 0}, // PWRON LOW to reload new OTP data
+{pmic_delay, 0, 500},
+{pmic_pwr, 0, 1},
+#endif
+};

board/toradex/colibri_imx7/colibri_imx7.c

@@ -24,6 +24,7 @@
 #include <power/pmic.h>
 #include <power/rn5t567_pmic.h>
 #include <usb/ehci-ci.h>
+#include "../common/tdx-common.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -387,6 +388,13 @@ int checkboard(void)
 	return 0;
 }
 
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+int ft_board_setup(void *blob, bd_t *bd)
+{
+	return ft_common_board_setup(blob, bd);
+}
+#endif
+
 #ifdef CONFIG_USB_EHCI_MX7
 static iomux_v3_cfg_t const usb_otg2_pads[] = {
 	MX7D_PAD_UART3_CTS_B__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),

board/toradex/colibri_pxa270/colibri_pxa270.c

@@ -18,6 +18,7 @@
 #include <netdev.h>
 #include <serial.h>
 #include <usb.h>
+#include "../common/tdx-common.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -43,6 +44,13 @@ int checkboard(void)
 	return 0;
 }
 
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+int ft_board_setup(void *blob, bd_t *bd)
+{
+	return ft_common_board_setup(blob, bd);
+}
+#endif
+
 int dram_init(void)
 {
 	pxa2xx_dram_init();

board/toradex/colibri_t20/colibri_t20.c

@@ -15,6 +15,7 @@
 #include <asm/io.h>
 #include <i2c.h>
 #include <nand.h>
+#include "../common/tdx-common.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -74,6 +75,13 @@ int checkboard(void)
 	return 0;
 }
 
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+int ft_board_setup(void *blob, bd_t *bd)
+{
+	return ft_common_board_setup(blob, bd);
+}
+#endif
+
 #ifdef CONFIG_TEGRA_MMC
 /*
  * Routine: pin_mux_mmc

board/toradex/colibri_t30/colibri_t30.c

@@ -14,6 +14,7 @@
 #include <asm/io.h>
 #include <i2c.h>
 #include "pinmux-config-colibri_t30.h"
+#include "../common/tdx-common.h"
 
 int arch_misc_init(void)
 {
@@ -31,6 +32,13 @@ int checkboard(void)
 	return 0;
 }
 
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+int ft_board_setup(void *blob, bd_t *bd)
+{
+	return ft_common_board_setup(blob, bd);
+}
+#endif
+
 /*
  * Routine: pinmux_init
  * Description: Do individual peripheral pinmux configs

board/toradex/colibri_vf/colibri_vf.c

@@ -15,13 +15,17 @@
 #include <asm/arch/crm_regs.h>
 #include <asm/arch/clock.h>
 #include <mmc.h>
+#include <fdt_support.h>
 #include <fsl_esdhc.h>
+#include <jffs2/load_kernel.h>
 #include <miiphy.h>
+#include <mtd_node.h>
 #include <netdev.h>
 #include <i2c.h>
 #include <g_dnl.h>
 #include <asm/gpio.h>
 #include <usb.h>
+#include "../common/tdx-common.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -364,12 +368,18 @@ static void clock_init(void)
 	clrsetbits_le32(&ccm->ccgr10, CCM_REG_CTRL_MASK,
 			CCM_CCGR10_NFC_CTRL_MASK);
 
-#ifdef CONFIG_CI_UDC
+#ifdef CONFIG_USB_EHCI_VF
 	setbits_le32(&ccm->ccgr1, CCM_CCGR1_USBC0_CTRL_MASK);
-#endif
-
-#ifdef CONFIG_USB_EHCI
 	setbits_le32(&ccm->ccgr7, CCM_CCGR7_USBC1_CTRL_MASK);
+
+	clrsetbits_le32(&anadig->pll3_ctrl, ANADIG_PLL3_CTRL_BYPASS |
+			ANADIG_PLL3_CTRL_POWERDOWN |
+			ANADIG_PLL3_CTRL_DIV_SELECT,
+			ANADIG_PLL3_CTRL_ENABLE);
+	clrsetbits_le32(&anadig->pll7_ctrl, ANADIG_PLL7_CTRL_BYPASS |
+			ANADIG_PLL7_CTRL_POWERDOWN |
+			ANADIG_PLL7_CTRL_DIV_SELECT,
+			ANADIG_PLL7_CTRL_ENABLE);
 #endif
 
 	clrsetbits_le32(&anadig->pll5_ctrl, ANADIG_PLL5_CTRL_BYPASS |
@@ -418,7 +428,7 @@ static void clock_init(void)
 			CCM_CSCDR2_ESDHC1_EN | CCM_CSCDR2_ESDHC1_CLK_DIV(0) |
 			CCM_CSCDR2_NFC_EN);
 	clrsetbits_le32(&ccm->cscdr3, CCM_REG_CTRL_MASK,
-			CCM_CSCDR3_NFC_PRE_DIV(5));
+			CCM_CSCDR3_NFC_PRE_DIV(3));
 	clrsetbits_le32(&ccm->cscmr2, CCM_REG_CTRL_MASK,
 			CCM_CSCMR2_RMII_CLK_SEL(2));
 }
@@ -528,6 +538,23 @@ int checkboard(void)
 	return 0;
 }
 
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+int ft_board_setup(void *blob, bd_t *bd)
+{
+#ifdef CONFIG_FDT_FIXUP_PARTITIONS
+	static struct node_info nodes[] = {
+		{ "fsl,vf610-nfc", MTD_DEV_TYPE_NAND, }, /* NAND flash */
+	};
+
+	/* Update partition nodes using info from mtdparts env var */
+	puts("   Updating MTD partitions...\n");
+	fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
+#endif
+
+	return ft_common_board_setup(blob, bd);
+}
+#endif
+
 #ifdef CONFIG_USB_EHCI_VF
 int board_ehci_hcd_init(int port)
 {