Merge branch 'master' of git://git.denx.de/u-boot-sh

- RZ/A1 addition.
- Old board removal.
This commit is contained in:
Tom Rini 2019-05-07 09:38:00 -04:00
commit 8d7f06bbbe
58 changed files with 1860 additions and 2164 deletions

View file

@ -785,7 +785,7 @@ config ARCH_QEMU
config ARCH_RMOBILE
bool "Renesas ARM SoCs"
select BOARD_EARLY_INIT_F
select BOARD_EARLY_INIT_F if !RZA1
select DM
select DM_SERIAL
imply CMD_DM

View file

@ -603,6 +603,9 @@ dtb-$(CONFIG_RCAR_GEN3) += \
r8a77990-ebisu-u-boot.dtb \
r8a77995-draak-u-boot.dtb
dtb-$(CONFIG_RZA1) += \
r7s72100-gr-peach-u-boot.dtb
dtb-$(CONFIG_SOC_KEYSTONE) += keystone-k2hk-evm.dtb \
keystone-k2l-evm.dtb \
keystone-k2e-evm.dtb \

View file

@ -0,0 +1,78 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree Source extras for U-Boot for the GR Peach board
*
* Copyright (C) 2019 Marek Vasut <marek.vasut@gmail.com>
*/
#include "r7s72100-gr-peach.dts"
/ {
aliases {
spi0 = &rpc;
};
soc {
u-boot,dm-pre-reloc;
};
leds {
led1 {
label = "peach:bottom:red";
};
led-red {
label = "peach:tri:red";
gpios = <&port6 13 GPIO_ACTIVE_HIGH>;
};
led-green {
label = "peach:tri:green";
gpios = <&port6 14 GPIO_ACTIVE_HIGH>;
};
led-blue {
label = "peach:tri:blue";
gpios = <&port6 15 GPIO_ACTIVE_HIGH>;
};
};
rpc: rpc@0xee200000 {
compatible = "renesas,rpc-r7s72100", "renesas,rpc";
reg = <0x3fefa000 0x100>, <0x18000000 0x08000000>;
bank-width = <2>;
num-cs = <1>;
status = "okay";
spi-max-frequency = <50000000>;
#address-cells = <1>;
#size-cells = <0>;
flash0: spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <1>;
reg = <0>;
status = "okay";
};
};
};
&ostm0 {
u-boot,dm-pre-reloc;
};
&pinctrl {
u-boot,dm-pre-reloc;
};
&scif2 {
u-boot,dm-pre-reloc;
clock = <66666666>; /* ToDo: Replace by DM clock driver */
};
&scif2_pins {
u-boot,dm-pre-reloc;
};

View file

@ -0,0 +1,134 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree Source for the GR-Peach board
*
* Copyright (C) 2017 Jacopo Mondi <jacopo+renesas@jmondi.org>
* Copyright (C) 2016 Renesas Electronics
*/
/dts-v1/;
#include "r7s72100.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/r7s72100-pinctrl.h>
/ {
model = "GR-Peach";
compatible = "renesas,gr-peach", "renesas,r7s72100";
aliases {
serial0 = &scif2;
};
chosen {
bootargs = "ignore_loglevel rw root=/dev/mtdblock0";
stdout-path = "serial0:115200n8";
};
memory@20000000 {
device_type = "memory";
reg = <0x20000000 0x00a00000>;
};
lbsc {
#address-cells = <1>;
#size-cells = <1>;
};
flash@18000000 {
compatible = "mtd-rom";
probe-type = "map_rom";
reg = <0x18000000 0x00800000>;
bank-width = <4>;
device-width = <1>;
#address-cells = <1>;
#size-cells = <1>;
rootfs@600000 {
label = "rootfs";
reg = <0x00600000 0x00200000>;
};
};
leds {
status = "okay";
compatible = "gpio-leds";
led1 {
gpios = <&port6 12 GPIO_ACTIVE_HIGH>;
};
};
};
&pinctrl {
scif2_pins: serial2 {
/* P6_2 as RxD2; P6_3 as TxD2 */
pinmux = <RZA1_PINMUX(6, 2, 7)>, <RZA1_PINMUX(6, 3, 7)>;
};
ether_pins: ether {
/* Ethernet on Ports 1,3,5,10 */
pinmux = <RZA1_PINMUX(1, 14, 4)>, /* P1_14 = ET_COL */
<RZA1_PINMUX(3, 0, 2)>, /* P3_0 = ET_TXCLK */
<RZA1_PINMUX(3, 3, 2)>, /* P3_3 = ET_MDIO */
<RZA1_PINMUX(3, 4, 2)>, /* P3_4 = ET_RXCLK */
<RZA1_PINMUX(3, 5, 2)>, /* P3_5 = ET_RXER */
<RZA1_PINMUX(3, 6, 2)>, /* P3_6 = ET_RXDV */
<RZA1_PINMUX(5, 9, 2)>, /* P5_9 = ET_MDC */
<RZA1_PINMUX(10, 1, 4)>, /* P10_1 = ET_TXER */
<RZA1_PINMUX(10, 2, 4)>, /* P10_2 = ET_TXEN */
<RZA1_PINMUX(10, 3, 4)>, /* P10_3 = ET_CRS */
<RZA1_PINMUX(10, 4, 4)>, /* P10_4 = ET_TXD0 */
<RZA1_PINMUX(10, 5, 4)>, /* P10_5 = ET_TXD1 */
<RZA1_PINMUX(10, 6, 4)>, /* P10_6 = ET_TXD2 */
<RZA1_PINMUX(10, 7, 4)>, /* P10_7 = ET_TXD3 */
<RZA1_PINMUX(10, 8, 4)>, /* P10_8 = ET_RXD0 */
<RZA1_PINMUX(10, 9, 4)>, /* P10_9 = ET_RXD1 */
<RZA1_PINMUX(10, 10, 4)>,/* P10_10 = ET_RXD2 */
<RZA1_PINMUX(10, 11, 4)>;/* P10_11 = ET_RXD3 */
};
};
&extal_clk {
clock-frequency = <13333000>;
};
&usb_x1_clk {
clock-frequency = <48000000>;
};
&mtu2 {
status = "okay";
};
&ostm0 {
status = "okay";
};
&ostm1 {
status = "okay";
};
&scif2 {
pinctrl-names = "default";
pinctrl-0 = <&scif2_pins>;
status = "okay";
};
&ether {
pinctrl-names = "default";
pinctrl-0 = <&ether_pins>;
status = "okay";
renesas,no-ether-link;
phy-handle = <&phy0>;
phy0: ethernet-phy@0 {
reg = <0>;
reset-gpios = <&port4 2 GPIO_ACTIVE_LOW>;
reset-delay-us = <5>;
};
};

705
arch/arm/dts/r7s72100.dtsi Normal file
View file

@ -0,0 +1,705 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree Source for the r7s72100 SoC
*
* Copyright (C) 2013-14 Renesas Solutions Corp.
* Copyright (C) 2014 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com>
*/
#include <dt-bindings/clock/r7s72100-clock.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
compatible = "renesas,r7s72100";
#address-cells = <1>;
#size-cells = <1>;
aliases {
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
i2c3 = &i2c3;
spi0 = &spi0;
spi1 = &spi1;
spi2 = &spi2;
spi3 = &spi3;
spi4 = &spi4;
};
/* Fixed factor clocks */
b_clk: b {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R7S72100_CLK_PLL>;
clock-mult = <1>;
clock-div = <3>;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
clock-frequency = <400000000>;
clocks = <&cpg_clocks R7S72100_CLK_I>;
next-level-cache = <&L2>;
};
};
/* External clocks */
extal_clk: extal {
#clock-cells = <0>;
compatible = "fixed-clock";
/* If clk present, value must be set by board */
clock-frequency = <0>;
};
p0_clk: p0 {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R7S72100_CLK_PLL>;
clock-mult = <1>;
clock-div = <12>;
};
p1_clk: p1 {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R7S72100_CLK_PLL>;
clock-mult = <1>;
clock-div = <6>;
};
pmu {
compatible = "arm,cortex-a9-pmu";
interrupts-extended = <&gic GIC_PPI 0 IRQ_TYPE_LEVEL_HIGH>;
};
rtc_x1_clk: rtc_x1 {
#clock-cells = <0>;
compatible = "fixed-clock";
/* If clk present, value must be set by board to 32678 */
clock-frequency = <0>;
};
rtc_x3_clk: rtc_x3 {
#clock-cells = <0>;
compatible = "fixed-clock";
/* If clk present, value must be set by board to 4000000 */
clock-frequency = <0>;
};
soc {
compatible = "simple-bus";
interrupt-parent = <&gic>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
L2: cache-controller@3ffff000 {
compatible = "arm,pl310-cache";
reg = <0x3ffff000 0x1000>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
arm,early-bresp-disable;
arm,full-line-zero-disable;
cache-unified;
cache-level = <2>;
};
scif0: serial@e8007000 {
compatible = "renesas,scif-r7s72100", "renesas,scif";
reg = <0xe8007000 64>;
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF0>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
scif1: serial@e8007800 {
compatible = "renesas,scif-r7s72100", "renesas,scif";
reg = <0xe8007800 64>;
interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF1>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
scif2: serial@e8008000 {
compatible = "renesas,scif-r7s72100", "renesas,scif";
reg = <0xe8008000 64>;
interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF2>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
scif3: serial@e8008800 {
compatible = "renesas,scif-r7s72100", "renesas,scif";
reg = <0xe8008800 64>;
interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF3>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
scif4: serial@e8009000 {
compatible = "renesas,scif-r7s72100", "renesas,scif";
reg = <0xe8009000 64>;
interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF4>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
scif5: serial@e8009800 {
compatible = "renesas,scif-r7s72100", "renesas,scif";
reg = <0xe8009800 64>;
interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF5>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
scif6: serial@e800a000 {
compatible = "renesas,scif-r7s72100", "renesas,scif";
reg = <0xe800a000 64>;
interrupts = <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF6>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
scif7: serial@e800a800 {
compatible = "renesas,scif-r7s72100", "renesas,scif";
reg = <0xe800a800 64>;
interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF7>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
spi0: spi@e800c800 {
compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
reg = <0xe800c800 0x24>;
interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error", "rx", "tx";
clocks = <&mstp10_clks R7S72100_CLK_SPI0>;
power-domains = <&cpg_clocks>;
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi1: spi@e800d000 {
compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
reg = <0xe800d000 0x24>;
interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error", "rx", "tx";
clocks = <&mstp10_clks R7S72100_CLK_SPI1>;
power-domains = <&cpg_clocks>;
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi2: spi@e800d800 {
compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
reg = <0xe800d800 0x24>;
interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error", "rx", "tx";
clocks = <&mstp10_clks R7S72100_CLK_SPI2>;
power-domains = <&cpg_clocks>;
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi3: spi@e800e000 {
compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
reg = <0xe800e000 0x24>;
interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error", "rx", "tx";
clocks = <&mstp10_clks R7S72100_CLK_SPI3>;
power-domains = <&cpg_clocks>;
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi4: spi@e800e800 {
compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
reg = <0xe800e800 0x24>;
interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error", "rx", "tx";
clocks = <&mstp10_clks R7S72100_CLK_SPI4>;
power-domains = <&cpg_clocks>;
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
usbhs0: usb@e8010000 {
compatible = "renesas,usbhs-r7s72100", "renesas,rza1-usbhs";
reg = <0xe8010000 0x1a0>;
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R7S72100_CLK_USB0>;
renesas,buswait = <4>;
power-domains = <&cpg_clocks>;
status = "disabled";
};
usbhs1: usb@e8207000 {
compatible = "renesas,usbhs-r7s72100", "renesas,rza1-usbhs";
reg = <0xe8207000 0x1a0>;
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R7S72100_CLK_USB1>;
renesas,buswait = <4>;
power-domains = <&cpg_clocks>;
status = "disabled";
};
mmcif: mmc@e804c800 {
compatible = "renesas,mmcif-r7s72100", "renesas,sh-mmcif";
reg = <0xe804c800 0x80>;
interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R7S72100_CLK_MMCIF>;
power-domains = <&cpg_clocks>;
reg-io-width = <4>;
bus-width = <8>;
status = "disabled";
};
sdhi0: sd@e804e000 {
compatible = "renesas,sdhi-r7s72100";
reg = <0xe804e000 0x100>;
interrupts = <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp12_clks R7S72100_CLK_SDHI00>,
<&mstp12_clks R7S72100_CLK_SDHI01>;
clock-names = "core", "cd";
power-domains = <&cpg_clocks>;
cap-sd-highspeed;
cap-sdio-irq;
status = "disabled";
};
sdhi1: sd@e804e800 {
compatible = "renesas,sdhi-r7s72100";
reg = <0xe804e800 0x100>;
interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp12_clks R7S72100_CLK_SDHI10>,
<&mstp12_clks R7S72100_CLK_SDHI11>;
clock-names = "core", "cd";
power-domains = <&cpg_clocks>;
cap-sd-highspeed;
cap-sdio-irq;
status = "disabled";
};
gic: interrupt-controller@e8201000 {
compatible = "arm,pl390";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
reg = <0xe8201000 0x1000>,
<0xe8202000 0x1000>;
};
ether: ethernet@e8203000 {
compatible = "renesas,ether-r7s72100";
reg = <0xe8203000 0x800>,
<0xe8204800 0x200>;
interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R7S72100_CLK_ETHER>;
power-domains = <&cpg_clocks>;
phy-mode = "mii";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
ceu: camera@e8210000 {
reg = <0xe8210000 0x3000>;
compatible = "renesas,r7s72100-ceu";
interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp6_clks R7S72100_CLK_CEU>;
power-domains = <&cpg_clocks>;
status = "disabled";
};
wdt: watchdog@fcfe0000 {
compatible = "renesas,r7s72100-wdt", "renesas,rza-wdt";
reg = <0xfcfe0000 0x6>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&p0_clk>;
};
/* Special CPG clocks */
cpg_clocks: cpg_clocks@fcfe0000 {
#clock-cells = <1>;
compatible = "renesas,r7s72100-cpg-clocks",
"renesas,rz-cpg-clocks";
reg = <0xfcfe0000 0x18>;
clocks = <&extal_clk>, <&usb_x1_clk>;
clock-output-names = "pll", "i", "g";
#power-domain-cells = <0>;
};
/* MSTP clocks */
mstp3_clks: mstp3_clks@fcfe0420 {
#clock-cells = <1>;
compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0xfcfe0420 4>;
clocks = <&p0_clk>;
clock-indices = <R7S72100_CLK_MTU2>;
clock-output-names = "mtu2";
};
mstp4_clks: mstp4_clks@fcfe0424 {
#clock-cells = <1>;
compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0xfcfe0424 4>;
clocks = <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>,
<&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>;
clock-indices = <
R7S72100_CLK_SCIF0 R7S72100_CLK_SCIF1 R7S72100_CLK_SCIF2 R7S72100_CLK_SCIF3
R7S72100_CLK_SCIF4 R7S72100_CLK_SCIF5 R7S72100_CLK_SCIF6 R7S72100_CLK_SCIF7
>;
clock-output-names = "scif0", "scif1", "scif2", "scif3", "scif4", "scif5", "scif6", "scif7";
};
mstp5_clks: mstp5_clks@fcfe0428 {
#clock-cells = <1>;
compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0xfcfe0428 4>;
clocks = <&p0_clk>, <&p0_clk>;
clock-indices = <R7S72100_CLK_OSTM0 R7S72100_CLK_OSTM1>;
clock-output-names = "ostm0", "ostm1";
};
mstp6_clks: mstp6_clks@fcfe042c {
#clock-cells = <1>;
compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0xfcfe042c 4>;
clocks = <&b_clk>, <&p0_clk>;
clock-indices = <R7S72100_CLK_CEU R7S72100_CLK_RTC>;
clock-output-names = "ceu", "rtc";
};
mstp7_clks: mstp7_clks@fcfe0430 {
#clock-cells = <1>;
compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0xfcfe0430 4>;
clocks = <&b_clk>, <&p1_clk>, <&p1_clk>;
clock-indices = <R7S72100_CLK_ETHER R7S72100_CLK_USB0 R7S72100_CLK_USB1>;
clock-output-names = "ether", "usb0", "usb1";
};
mstp8_clks: mstp8_clks@fcfe0434 {
#clock-cells = <1>;
compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0xfcfe0434 4>;
clocks = <&p1_clk>;
clock-indices = <R7S72100_CLK_MMCIF>;
clock-output-names = "mmcif";
};
mstp9_clks: mstp9_clks@fcfe0438 {
#clock-cells = <1>;
compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0xfcfe0438 4>;
clocks = <&p0_clk>, <&p0_clk>, <&p0_clk>, <&p0_clk>;
clock-indices = <
R7S72100_CLK_I2C0 R7S72100_CLK_I2C1 R7S72100_CLK_I2C2 R7S72100_CLK_I2C3
>;
clock-output-names = "i2c0", "i2c1", "i2c2", "i2c3";
};
mstp10_clks: mstp10_clks@fcfe043c {
#clock-cells = <1>;
compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0xfcfe043c 4>;
clocks = <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>,
<&p1_clk>;
clock-indices = <
R7S72100_CLK_SPI0 R7S72100_CLK_SPI1 R7S72100_CLK_SPI2 R7S72100_CLK_SPI3
R7S72100_CLK_SPI4
>;
clock-output-names = "spi0", "spi1", "spi2", "spi3", "spi4";
};
mstp12_clks: mstp12_clks@fcfe0444 {
#clock-cells = <1>;
compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0xfcfe0444 4>;
clocks = <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>;
clock-indices = <
R7S72100_CLK_SDHI00 R7S72100_CLK_SDHI01
R7S72100_CLK_SDHI10 R7S72100_CLK_SDHI11
>;
clock-output-names = "sdhi00", "sdhi01", "sdhi10", "sdhi11";
};
pinctrl: pin-controller@fcfe3000 {
compatible = "renesas,r7s72100-ports";
reg = <0xfcfe3000 0x4230>;
port0: gpio-0 {
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl 0 0 6>;
};
port1: gpio-1 {
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl 0 16 16>;
};
port2: gpio-2 {
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl 0 32 16>;
};
port3: gpio-3 {
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl 0 48 16>;
};
port4: gpio-4 {
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl 0 64 16>;
};
port5: gpio-5 {
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl 0 80 11>;
};
port6: gpio-6 {
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl 0 96 16>;
};
port7: gpio-7 {
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl 0 112 16>;
};
port8: gpio-8 {
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl 0 128 16>;
};
port9: gpio-9 {
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl 0 144 8>;
};
port10: gpio-10 {
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl 0 160 16>;
};
port11: gpio-11 {
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl 0 176 16>;
};
};
ostm0: timer@fcfec000 {
compatible = "renesas,r7s72100-ostm", "renesas,ostm";
reg = <0xfcfec000 0x30>;
interrupts = <GIC_SPI 102 IRQ_TYPE_EDGE_RISING>;
clocks = <&mstp5_clks R7S72100_CLK_OSTM0>;
power-domains = <&cpg_clocks>;
status = "disabled";
};
ostm1: timer@fcfec400 {
compatible = "renesas,r7s72100-ostm", "renesas,ostm";
reg = <0xfcfec400 0x30>;
interrupts = <GIC_SPI 103 IRQ_TYPE_EDGE_RISING>;
clocks = <&mstp5_clks R7S72100_CLK_OSTM1>;
power-domains = <&cpg_clocks>;
status = "disabled";
};
i2c0: i2c@fcfee000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
reg = <0xfcfee000 0x44>;
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 158 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 159 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
clock-frequency = <100000>;
power-domains = <&cpg_clocks>;
status = "disabled";
};
i2c1: i2c@fcfee400 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
reg = <0xfcfee400 0x44>;
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 166 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 167 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R7S72100_CLK_I2C1>;
clock-frequency = <100000>;
power-domains = <&cpg_clocks>;
status = "disabled";
};
i2c2: i2c@fcfee800 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
reg = <0xfcfee800 0x44>;
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 174 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 175 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R7S72100_CLK_I2C2>;
clock-frequency = <100000>;
power-domains = <&cpg_clocks>;
status = "disabled";
};
i2c3: i2c@fcfeec00 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
reg = <0xfcfeec00 0x44>;
interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 182 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 183 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R7S72100_CLK_I2C3>;
clock-frequency = <100000>;
power-domains = <&cpg_clocks>;
status = "disabled";
};
mtu2: timer@fcff0000 {
compatible = "renesas,mtu2-r7s72100", "renesas,mtu2";
reg = <0xfcff0000 0x400>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tgi0a";
clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
rtc: rtc@fcff1000 {
compatible = "renesas,r7s72100-rtc", "renesas,sh-rtc";
reg = <0xfcff1000 0x2e>;
interrupts = <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "alarm", "period", "carry";
clocks = <&mstp6_clks R7S72100_CLK_RTC>, <&rtc_x1_clk>,
<&rtc_x3_clk>, <&extal_clk>;
clock-names = "fck", "rtc_x1", "rtc_x3", "extal";
power-domains = <&cpg_clocks>;
status = "disabled";
};
};
usb_x1_clk: usb_x1 {
#clock-cells = <0>;
compatible = "fixed-clock";
/* If clk present, value must be set by board */
clock-frequency = <0>;
};
};

View file

@ -22,9 +22,14 @@ config RCAR_GEN3
imply CMD_MMC_SWRITE if MMC
imply SUPPORT_EMMC_RPMB if MMC
config RZA1
prompt "Renesas ARM SoCs RZ/A1 (32bit)"
select CPU_V7A
endchoice
source "arch/arm/mach-rmobile/Kconfig.32"
source "arch/arm/mach-rmobile/Kconfig.64"
source "arch/arm/mach-rmobile/Kconfig.rza1"
endif

View file

@ -0,0 +1,28 @@
if RZA1
# required by the Ethernet driver
config R7S72100
bool
default y
# required by serial and usb driver
config CPU_RZA1
bool
default y
choice
prompt "Renesas RZ/A1 board select"
# Renesas Supported Boards
config TARGET_GRPEACH
bool "GR-PEACH board"
endchoice
config SYS_SOC
default "rmobile"
# Renesas Supported Boards
source "board/renesas/grpeach/Kconfig"
endif

View file

@ -26,6 +26,7 @@ void enable_caches(void)
#endif
#ifdef CONFIG_DISPLAY_CPUINFO
#ifndef CONFIG_RZA1
static u32 __rmobile_get_cpu_type(void)
{
return 0x0;
@ -105,4 +106,11 @@ int print_cpuinfo(void)
return 0;
}
#else
int print_cpuinfo(void)
{
printf("CPU: Renesas Electronics RZ/A1\n");
return 0;
}
#endif
#endif /* CONFIG_DISPLAY_CPUINFO */

View file

@ -18,6 +18,7 @@
#include <asm/arch/r8a7794.h>
#elif defined(CONFIG_RCAR_GEN3)
#include <asm/arch/rcar-gen3-base.h>
#elif defined(CONFIG_R7S72100)
#else
#error "SOC Name not defined"
#endif

View file

@ -75,10 +75,6 @@ config TARGET_AP325RXA
bool "Renesas AP-325RXA"
select CPU_SH4
config TARGET_ECOVEC
bool "EcoVec"
select CPU_SH4A
config TARGET_MIGOR
bool "Migo-R"
select CPU_SH4
@ -111,10 +107,6 @@ config TARGET_SH7763RDP
bool "SH7763RDP"
select CPU_SH4
config TARGET_SH7785LCR
bool "SH7785LCR"
select CPU_SH4A
endchoice
config SYS_ARCH
@ -135,7 +127,6 @@ source "board/ms7722se/Kconfig"
source "board/ms7750se/Kconfig"
source "board/renesas/MigoR/Kconfig"
source "board/renesas/ap325rxa/Kconfig"
source "board/renesas/ecovec/Kconfig"
source "board/renesas/r0p7734/Kconfig"
source "board/renesas/r2dplus/Kconfig"
source "board/renesas/r7780mp/Kconfig"
@ -146,7 +137,6 @@ source "board/renesas/sh7752evb/Kconfig"
source "board/renesas/sh7753evb/Kconfig"
source "board/renesas/sh7757lcr/Kconfig"
source "board/renesas/sh7763rdp/Kconfig"
source "board/renesas/sh7785lcr/Kconfig"
source "board/shmin/Kconfig"
endmenu

View file

@ -30,8 +30,6 @@
# include <asm/cpu_sh7722.h>
#elif defined (CONFIG_CPU_SH7723)
# include <asm/cpu_sh7723.h>
#elif defined (CONFIG_CPU_SH7724)
# include <asm/cpu_sh7724.h>
#elif defined (CONFIG_CPU_SH7734)
# include <asm/cpu_sh7734.h>
#elif defined (CONFIG_CPU_SH7752)
@ -44,8 +42,6 @@
# include <asm/cpu_sh7763.h>
#elif defined (CONFIG_CPU_SH7780)
# include <asm/cpu_sh7780.h>
#elif defined (CONFIG_CPU_SH7785)
# include <asm/cpu_sh7785.h>
#else
# error "Unknown SH4 variant"
#endif

View file

@ -1,209 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2008, 2011 Renesas Solutions Corp.
*
* SH7724 Internal I/O register
*/
#ifndef _ASM_CPU_SH7724_H_
#define _ASM_CPU_SH7724_H_
#define CACHE_OC_NUM_WAYS 4
#define CCR_CACHE_INIT 0x0000090d
/* EXP */
#define TRA 0xFF000020
#define EXPEVT 0xFF000024
#define INTEVT 0xFF000028
/* MMU */
#define PTEH 0xFF000000
#define PTEL 0xFF000004
#define TTB 0xFF000008
#define TEA 0xFF00000C
#define MMUCR 0xFF000010
#define PASCR 0xFF000070
#define IRMCR 0xFF000078
/* CACHE */
#define CCR 0xFF00001C
#define RAMCR 0xFF000074
/* INTC */
/* BSC */
#define MMSELR 0xFF800020
#define CMNCR 0xFEC10000
#define CS0BCR 0xFEC10004
#define CS2BCR 0xFEC10008
#define CS4BCR 0xFEC10010
#define CS5ABCR 0xFEC10014
#define CS5BBCR 0xFEC10018
#define CS6ABCR 0xFEC1001C
#define CS6BBCR 0xFEC10020
#define CS0WCR 0xFEC10024
#define CS2WCR 0xFEC10028
#define CS4WCR 0xFEC10030
#define CS5AWCR 0xFEC10034
#define CS5BWCR 0xFEC10038
#define CS6AWCR 0xFEC1003C
#define CS6BWCR 0xFEC10040
#define RBWTCNT 0xFEC10054
/* SBSC */
#define SBSC_SDCR 0xFE400008
#define SBSC_SDWCR 0xFE40000C
#define SBSC_SDPCR 0xFE400010
#define SBSC_RTCSR 0xFE400014
#define SBSC_RTCNT 0xFE400018
#define SBSC_RTCOR 0xFE40001C
#define SBSC_RFCR 0xFE400020
/* DSBC */
#define DBKIND 0xFD000008
#define DBSTATE 0xFD00000C
#define DBEN 0xFD000010
#define DBCMDCNT 0xFD000014
#define DBCKECNT 0xFD000018
#define DBCONF 0xFD000020
#define DBTR0 0xFD000030
#define DBTR1 0xFD000034
#define DBTR2 0xFD000038
#define DBTR3 0xFD00003C
#define DBRFPDN0 0xFD000040
#define DBRFPDN1 0xFD000044
#define DBRFPDN2 0xFD000048
#define DBRFSTS 0xFD00004C
#define DBMRCNT 0xFD000060
#define DBPDCNT0 0xFD000108
/* DMAC */
/* CPG */
#define FRQCRA 0xA4150000
#define FRQCRB 0xA4150004
#define FRQCR FRQCRA
#define VCLKCR 0xA4150004
#define SCLKACR 0xA4150008
#define SCLKBCR 0xA415000C
#define IRDACLKCR 0xA4150018
#define PLLCR 0xA4150024
#define DLLFRQ 0xA4150050
/* LOW POWER MODE */
#define STBCR 0xA4150020
#define MSTPCR0 0xA4150030
#define MSTPCR1 0xA4150034
#define MSTPCR2 0xA4150038
/* RWDT */
#define RWTCNT 0xA4520000
#define RWTCSR 0xA4520004
#define WTCNT RWTCNT
/* TMU */
#define TMU_BASE 0xFFD80000
/* TPU */
/* CMT */
#define CMSTR 0xA44A0000
#define CMCSR 0xA44A0060
#define CMCNT 0xA44A0064
#define CMCOR 0xA44A0068
/* MSIOF */
/* SCIF */
#define SCIF0_BASE 0xFFE00000
#define SCIF1_BASE 0xFFE10000
#define SCIF2_BASE 0xFFE20000
#define SCIF3_BASE 0xa4e30000
#define SCIF4_BASE 0xa4e40000
#define SCIF5_BASE 0xa4e50000
/* RTC */
/* IrDA */
/* KEYSC */
/* USB */
/* IIC */
/* FLCTL */
/* VPU */
/* VIO(CEU) */
/* VIO(VEU) */
/* VIO(BEU) */
/* 2DG */
/* LCDC */
/* VOU */
/* TSIF */
/* SIU */
/* ATAPI */
/* PFC */
#define PACR 0xA4050100
#define PBCR 0xA4050102
#define PCCR 0xA4050104
#define PDCR 0xA4050106
#define PECR 0xA4050108
#define PFCR 0xA405010A
#define PGCR 0xA405010C
#define PHCR 0xA405010E
#define PJCR 0xA4050110
#define PKCR 0xA4050112
#define PLCR 0xA4050114
#define PMCR 0xA4050116
#define PNCR 0xA4050118
#define PQCR 0xA405011A
#define PRCR 0xA405011C
#define PSCR 0xA405011E
#define PTCR 0xA4050140
#define PUCR 0xA4050142
#define PVCR 0xA4050144
#define PWCR 0xA4050146
#define PXCR 0xA4050148
#define PYCR 0xA405014A
#define PZCR 0xA405014C
#define PSELA 0xA405014E
#define PSELB 0xA4050150
#define PSELC 0xA4050152
#define PSELD 0xA4050154
#define PSELE 0xA4050156
#define HIZCRA 0xA4050158
#define HIZCRB 0xA405015A
#define HIZCRC 0xA405015C
#define HIZCRD 0xA405015E
#define MSELCRA 0xA4050180
#define MSELCRB 0xA4050182
#define PULCR 0xA4050184
#define DRVCRA 0xA405018A
#define DRVCRB 0xA405018C
/* I/O Port */
#define PADR 0xA4050120
#define PBDR 0xA4050122
#define PCDR 0xA4050124
#define PDDR 0xA4050126
#define PEDR 0xA4050128
#define PFDR 0xA405012A
#define PGDR 0xA405012C
#define PHDR 0xA405012E
#define PJDR 0xA4050130
#define PKDR 0xA4050132
#define PLDR 0xA4050134
#define PMDR 0xA4050136
#define PNDR 0xA4050138
#define PQDR 0xA405013A
#define PRDR 0xA405013C
#define PSDR 0xA405013E
#define PTDR 0xA4050160
#define PUDR 0xA4050162
#define PVDR 0xA4050164
#define PWDR 0xA4050166
#define PXDR 0xA4050168
#define PYDR 0xA405016A
#define PZDR 0xA405016C
/* UBC */
/* H-UDI */
#endif /* _ASM_CPU_SH7724_H_ */

View file

@ -1,119 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
#ifndef _ASM_CPU_SH7785_H_
#define _ASM_CPU_SH7785_H_
/*
* Copyright (c) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* Copyright (c) 2008 Yusuke Goda <goda.yusuke@renesas.com>
* Copyright (c) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
*/
#define CACHE_OC_NUM_WAYS 1
#define CCR_CACHE_INIT 0x0000090b
/* Exceptions */
#define TRA 0xFF000020
#define EXPEVT 0xFF000024
#define INTEVT 0xFF000028
/* Cache Controller */
#define CCR 0xFF00001C
#define QACR0 0xFF000038
#define QACR1 0xFF00003C
#define RAMCR 0xFF000074
/* Watchdog Timer and Reset */
#define WTCNT WDTCNT
#define WDTST 0xFFCC0000
#define WDTCSR 0xFFCC0004
#define WDTBST 0xFFCC0008
#define WDTCNT 0xFFCC0010
#define WDTBCNT 0xFFCC0018
/* Timer Unit */
#define TMU_BASE 0xFFD80000
/* Serial Communication Interface with FIFO */
#define SCIF1_BASE 0xffeb0000
/* LBSC */
#define MMSELR 0xfc400020
#define LBSC_BASE 0xff800000
#define BCR (LBSC_BASE + 0x1000)
#define CS0BCR (LBSC_BASE + 0x2000)
#define CS1BCR (LBSC_BASE + 0x2010)
#define CS2BCR (LBSC_BASE + 0x2020)
#define CS3BCR (LBSC_BASE + 0x2030)
#define CS4BCR (LBSC_BASE + 0x2040)
#define CS5BCR (LBSC_BASE + 0x2050)
#define CS6BCR (LBSC_BASE + 0x2060)
#define CS0WCR (LBSC_BASE + 0x2008)
#define CS1WCR (LBSC_BASE + 0x2018)
#define CS2WCR (LBSC_BASE + 0x2028)
#define CS3WCR (LBSC_BASE + 0x2038)
#define CS4WCR (LBSC_BASE + 0x2048)
#define CS5WCR (LBSC_BASE + 0x2058)
#define CS6WCR (LBSC_BASE + 0x2068)
#define CS5PCR (LBSC_BASE + 0x2070)
#define CS6PCR (LBSC_BASE + 0x2080)
/* PCI Controller */
#define SH7780_PCIECR 0xFE000008
#define SH7780_PCIVID 0xFE040000
#define SH7780_PCIDID 0xFE040002
#define SH7780_PCICMD 0xFE040004
#define SH7780_PCISTATUS 0xFE040006
#define SH7780_PCIRID 0xFE040008
#define SH7780_PCIPIF 0xFE040009
#define SH7780_PCISUB 0xFE04000A
#define SH7780_PCIBCC 0xFE04000B
#define SH7780_PCICLS 0xFE04000C
#define SH7780_PCILTM 0xFE04000D
#define SH7780_PCIHDR 0xFE04000E
#define SH7780_PCIBIST 0xFE04000F
#define SH7780_PCIIBAR 0xFE040010
#define SH7780_PCIMBAR0 0xFE040014
#define SH7780_PCIMBAR1 0xFE040018
#define SH7780_PCISVID 0xFE04002C
#define SH7780_PCISID 0xFE04002E
#define SH7780_PCICP 0xFE040034
#define SH7780_PCIINTLINE 0xFE04003C
#define SH7780_PCIINTPIN 0xFE04003D
#define SH7780_PCIMINGNT 0xFE04003E
#define SH7780_PCIMAXLAT 0xFE04003F
#define SH7780_PCICID 0xFE040040
#define SH7780_PCINIP 0xFE040041
#define SH7780_PCIPMC 0xFE040042
#define SH7780_PCIPMCSR 0xFE040044
#define SH7780_PCIPMCSRBSE 0xFE040046
#define SH7780_PCI_CDD 0xFE040047
#define SH7780_PCICR 0xFE040100
#define SH7780_PCILSR0 0xFE040104
#define SH7780_PCILSR1 0xFE040108
#define SH7780_PCILAR0 0xFE04010C
#define SH7780_PCILAR1 0xFE040110
#define SH7780_PCIIR 0xFE040114
#define SH7780_PCIIMR 0xFE040118
#define SH7780_PCIAIR 0xFE04011C
#define SH7780_PCICIR 0xFE040120
#define SH7780_PCIAINT 0xFE040130
#define SH7780_PCIAINTM 0xFE040134
#define SH7780_PCIBMIR 0xFE040138
#define SH7780_PCIPAR 0xFE0401C0
#define SH7780_PCIPINT 0xFE0401CC
#define SH7780_PCIPINTM 0xFE0401D0
#define SH7780_PCIMBR0 0xFE0401E0
#define SH7780_PCIMBMR0 0xFE0401E4
#define SH7780_PCIMBR1 0xFE0401E8
#define SH7780_PCIMBMR1 0xFE0401EC
#define SH7780_PCIMBR2 0xFE0401F0
#define SH7780_PCIMBMR2 0xFE0401F4
#define SH7780_PCIIOBR 0xFE0401F8
#define SH7780_PCIIOBMR 0xFE0401FC
#define SH7780_PCICSCR0 0xFE040210
#define SH7780_PCICSCR1 0xFE040214
#define SH7780_PCICSAR0 0xFE040218
#define SH7780_PCICSAR1 0xFE04021C
#define SH7780_PCIPDR 0xFE040220
#endif /* _ASM_CPU_SH7780_H_ */

View file

@ -1,7 +0,0 @@
ECOVEC BOARD
M: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
M: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
S: Maintained
F: board/renesas/ecovec/
F: include/configs/ecovec.h
F: configs/ecovec_defconfig

View file

@ -1,8 +0,0 @@
# SPDX-License-Identifier: GPL-2.0+
#
# Copyright (C) 2011 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
# Copyright (C) 2011 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
#
obj-y := ecovec.o
extra-y += lowlevel_init.o

View file

@ -1,98 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2009, 2011 Renesas Solutions Corp.
* Copyright (C) 2009 Kuninori Morimoto <morimoto.kuninori@renesas.com>
* Copyright (C) 2011 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
*/
#include <common.h>
#include <command.h>
#include <asm/io.h>
#include <asm/processor.h>
#include <i2c.h>
#include <netdev.h>
/* USB power management register */
#define UPONCR0 0xA40501D4
int checkboard(void)
{
puts("BOARD: ecovec\n");
return 0;
}
static void debug_led(u8 led)
{
/* PDGR[0-4] is debug LED */
outb((inb(PGDR) & ~0x0F) | (led & 0x0F), PGDR);
}
int board_late_init(void)
{
u8 mac[6];
char env_mac[18];
udelay(1000);
/* SH-Eth (PLCR, PNCR, PXCR, PSELx )*/
outw(inw(PLCR) & ~0xFFF0, PLCR);
outw(inw(PNCR) & ~0x000F, PNCR);
outw(inw(PXCR) & ~0x0FC0, PXCR);
outw((inw(PSELB) & ~0x030F) | 0x020A, PSELB);
outw((inw(PSELC) & ~0x0307) | 0x0207, PSELC);
outw((inw(PSELE) & ~0x00c0) | 0x0080, PSELE);
debug_led(1 << 3);
outl(inl(MSTPCR2) & ~0x10000000, MSTPCR2);
i2c_set_bus_num(1); /* Use I2C 1 */
/* Read MAC address */
i2c_read(0x50, 0x10, 0, mac, 6);
/* Set MAC address */
sprintf(env_mac, "%02X:%02X:%02X:%02X:%02X:%02X",
mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
env_set("ethaddr", env_mac);
debug_led(0x0F);
return 0;
}
int board_init(void)
{
/* LED (PTG) */
outw((inw(PGCR) & ~0xFF) | 0x55, PGCR);
outw((inw(HIZCRA) & ~0x02), HIZCRA);
debug_led(1 << 0);
/* SCIF0 (PTF, PTM) */
outw(inw(PFCR) & ~0x30, PFCR);
outw(inw(PMCR) & ~0x0C, PMCR);
outw((inw(PSELA) & ~0x40) | 0x40, PSELA);
debug_led(1 << 1);
/* RMII (PTA) */
outw((inw(PACR) & ~0x0C) | 0x04, PACR);
outb((inb(PADR) & ~0x02) | 0x02, PADR);
debug_led(1 << 2);
/* USB host */
outw((inw(PBCR) & ~0x300) | 0x100, PBCR);
outb((inb(PBDR) & ~0x10) | 0x10, PBDR);
outl(inl(MSTPCR2) & ~0x100000, MSTPCR2);
outw(0x0600, UPONCR0);
debug_led(1 << 3);
/* debug switch */
outw((inw(PVCR) & ~0x03) | 0x02 , PVCR);
return 0;
}

View file

@ -1,196 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2011 Renesas Solutions Corp.
* Copyright (C) 2011 Nobuhiro Iwamatsu <nobuhiro.Iwamatsu.yj@renesas.com>
*
* board/renesas/ecovec/lowlevel_init.S
*/
#include <config.h>
#include <asm/processor.h>
#include <asm/macro.h>
#include <configs/ecovec.h>
.global lowlevel_init
.text
.align 2
lowlevel_init:
/* jump to CONFIG_ECOVEC_ROMIMAGE_ADDR if bit 1 of PVDR_A */
mov.l PVDR_A, r1
mov.l PVDR_D, r2
mov.b @r1, r0
tst r0, r2
bt 1f
mov.l JUMP_A, r1
jmp @r1
nop
1:
/* Disable watchdog */
write16 RWTCSR_A, RWTCSR_D
/* MMU Disable */
write32 MMUCR_A, MMUCR_D
/* Setup clocks */
write32 PLLCR_A, PLLCR_D
write32 FRQCRA_A, FRQCRA_D
write32 FRQCRB_A, FRQCRB_D
wait_timer TIMER_D
write32 MMSELR_A, MMSELR_D
/* Srtup BSC */
write32 CMNCR_A, CMNCR_D
write32 CS0BCR_A, CS0BCR_D
write32 CS0WCR_A, CS0WCR_D
wait_timer TIMER_D
/* Setup SDRAM */
write32 DBPDCNT0_A, DBPDCNT0_D0
write32 DBCONF_A, DBCONF_D
write32 DBTR0_A, DBTR0_D
write32 DBTR1_A, DBTR1_D
write32 DBTR2_A, DBTR2_D
write32 DBTR3_A, DBTR3_D
write32 DBKIND_A, DBKIND_D
write32 DBCKECNT_A, DBCKECNT_D
wait_timer TIMER_D
write32 DBCMDCNT_A, DBCMDCNT_D0
write32 DBMRCNT_A, DBMRCNT_D0
write32 DBMRCNT_A, DBMRCNT_D1
write32 DBMRCNT_A, DBMRCNT_D2
write32 DBMRCNT_A, DBMRCNT_D3
write32 DBCMDCNT_A, DBCMDCNT_D0
write32 DBCMDCNT_A, DBCMDCNT_D1
write32 DBCMDCNT_A, DBCMDCNT_D1
write32 DBMRCNT_A, DBMRCNT_D4
write32 DBMRCNT_A, DBMRCNT_D5
write32 DBMRCNT_A, DBMRCNT_D6
wait_timer TIMER_D
write32 DBEN_A, DBEN_D
write32 DBRFPDN1_A, DBRFPDN1_D
write32 DBRFPDN2_A, DBRFPDN2_D
write32 DBCMDCNT_A, DBCMDCNT_D0
/* Dummy read */
mov.l DUMMY_A ,r1
synco
mov.l @r1, r0
synco
mov.l SDRAM_A ,r1
synco
mov.l @r1, r0
synco
wait_timer TIMER_D
add #4, r1
synco
mov.l @r1, r0
synco
wait_timer TIMER_D
add #4, r1
synco
mov.l @r1, r0
synco
wait_timer TIMER_D
add #4, r1
synco
mov.l @r1, r0
synco
wait_timer TIMER_D
write32 DBCMDCNT_A, DBCMDCNT_D0
write32 DBCMDCNT_A, DBCMDCNT_D1
write32 DBPDCNT0_A, DBPDCNT0_D1
write32 DBRFPDN0_A, DBRFPDN0_D
wait_timer TIMER_D
write32 CCR_A, CCR_D
stc sr, r0
mov.l SR_MASK_D, r1
and r1, r0
ldc r0, sr
rts
.align 2
PVDR_A: .long PVDR
PVDR_D: .long 0x00000001
JUMP_A: .long CONFIG_ECOVEC_ROMIMAGE_ADDR
TIMER_D: .long 64
RWTCSR_A: .long RWTCSR
RWTCSR_D: .long 0x0000A507
MMUCR_A: .long MMUCR
MMUCR_D: .long 0x00000004
PLLCR_A: .long PLLCR
PLLCR_D: .long 0x00004000
FRQCRA_A: .long FRQCRA
FRQCRA_D: .long 0x8E003508
FRQCRB_A: .long FRQCRB
FRQCRB_D: .long 0x0
MMSELR_A: .long MMSELR
MMSELR_D: .long 0xA5A50000
CMNCR_A: .long CMNCR
CMNCR_D: .long 0x00000013
CS0BCR_A: .long CS0BCR
CS0BCR_D: .long 0x11110400
CS0WCR_A: .long CS0WCR
CS0WCR_D: .long 0x00000440
DBPDCNT0_A: .long DBPDCNT0
DBPDCNT0_D0: .long 0x00000181
DBPDCNT0_D1: .long 0x00000080
DBCONF_A: .long DBCONF
DBCONF_D: .long 0x015B0002
DBTR0_A: .long DBTR0
DBTR0_D: .long 0x03061502
DBTR1_A: .long DBTR1
DBTR1_D: .long 0x02020102
DBTR2_A: .long DBTR2
DBTR2_D: .long 0x01090305
DBTR3_A: .long DBTR3
DBTR3_D: .long 0x00000002
DBKIND_A: .long DBKIND
DBKIND_D: .long 0x00000005
DBCKECNT_A: .long DBCKECNT
DBCKECNT_D: .long 0x00000001
DBCMDCNT_A: .long DBCMDCNT
DBCMDCNT_D0:.long 0x2
DBCMDCNT_D1:.long 0x4
DBMRCNT_A: .long DBMRCNT
DBMRCNT_D0: .long 0x00020000
DBMRCNT_D1: .long 0x00030000
DBMRCNT_D2: .long 0x00010040
DBMRCNT_D3: .long 0x00000532
DBMRCNT_D4: .long 0x00000432
DBMRCNT_D5: .long 0x000103C0
DBMRCNT_D6: .long 0x00010040
DBEN_A: .long DBEN
DBEN_D: .long 0x01
DBRFPDN0_A: .long DBRFPDN0
DBRFPDN1_A: .long DBRFPDN1
DBRFPDN2_A: .long DBRFPDN2
DBRFPDN0_D: .long 0x00010000
DBRFPDN1_D: .long 0x00000613
DBRFPDN2_D: .long 0x238C003A
SDRAM_A: .long 0xa8000000
DUMMY_A: .long 0x0c400000
CCR_A: .long CCR
CCR_D: .long 0x0000090B
SR_MASK_D: .long 0xEFFFFF0F

View file

@ -1,12 +1,12 @@
if TARGET_ECOVEC
if TARGET_GRPEACH
config SYS_BOARD
default "ecovec"
default "grpeach"
config SYS_VENDOR
default "renesas"
config SYS_CONFIG_NAME
default "ecovec"
default "grpeach"
endif

View file

@ -0,0 +1,6 @@
GRPEACH BOARD
M: Marek Vasut <marek.vasut@gmail.com>
S: Maintained
F: board/renesas/grpeach/
F: include/configs/grpeach.h
F: configs/grpeach_defconfig

View file

@ -0,0 +1,8 @@
#
# Copyright (C) 2017 Renesas Electronics
# Copyright (C) 2017 Chris Brandt
#
# SPDX-License-Identifier: GPL-2.0+
obj-y := grpeach.o
obj-y += lowlevel_init.o

View file

@ -0,0 +1,52 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2017 Renesas Electronics
* Copyright (C) Chris Brandt
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/sys_proto.h>
#define RZA1_WDT_BASE 0xfcfe0000
#define WTCSR 0x00
#define WTCNT 0x02
#define WRCSR 0x04
DECLARE_GLOBAL_DATA_PTR;
int board_init(void)
{
gd->bd->bi_boot_params = (CONFIG_SYS_SDRAM_BASE + 0x100);
return 0;
}
int dram_init(void)
{
if (fdtdec_setup_mem_size_base() != 0)
return -EINVAL;
return 0;
}
int dram_init_banksize(void)
{
fdtdec_setup_memory_banksize();
return 0;
}
void reset_cpu(ulong addr)
{
/* Dummy read (must read WRCSR:WOVF at least once before clearing) */
readb(RZA1_WDT_BASE + WRCSR);
writew(0xa500, RZA1_WDT_BASE + WRCSR);
writew(0x5a5f, RZA1_WDT_BASE + WRCSR);
writew(0x5a00, RZA1_WDT_BASE + WTCNT);
writew(0xa578, RZA1_WDT_BASE + WTCSR);
for (;;)
asm volatile("wfi");
}

View file

@ -0,0 +1,107 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2017 Renesas Electronics
* Copyright (C) 2017 Chris Brandt
*/
#include <config.h>
#include <version.h>
#include <asm/macro.h>
/* Watchdog Registers */
#define RZA1_WDT_BASE 0xFCFE0000
#define WTCSR (RZA1_WDT_BASE + 0x00) /* Watchdog Timer Control Register */
#define WTCNT (RZA1_WDT_BASE + 0x02) /* Watchdog Timer Counter Register */
#define WRCSR (RZA1_WDT_BASE + 0x04) /* Watchdog Reset Control Register */
/* Standby controller registers (chapter 55) */
#define RZA1_STBCR_BASE 0xFCFE0020
#define STBCR1 (RZA1_STBCR_BASE + 0x00)
#define STBCR2 (RZA1_STBCR_BASE + 0x04)
#define STBCR3 (RZA1_STBCR_BASE + 0x400)
#define STBCR4 (RZA1_STBCR_BASE + 0x404)
#define STBCR5 (RZA1_STBCR_BASE + 0x408)
#define STBCR6 (RZA1_STBCR_BASE + 0x40c)
#define STBCR7 (RZA1_STBCR_BASE + 0x410)
#define STBCR8 (RZA1_STBCR_BASE + 0x414)
#define STBCR9 (RZA1_STBCR_BASE + 0x418)
#define STBCR10 (RZA1_STBCR_BASE + 0x41c)
#define STBCR11 (RZA1_STBCR_BASE + 0x420)
#define STBCR12 (RZA1_STBCR_BASE + 0x424)
#define STBCR13 (RZA1_STBCR_BASE + 0x450)
/* Clock Registers */
#define RZA1_FRQCR_BASE 0xFCFE0010
#define FRQCR (RZA1_FRQCR_BASE + 0x00)
#define FRQCR2 (RZA1_FRQCR_BASE + 0x04)
#define SYSCR1 0xFCFE0400 /* System control register 1 */
#define SYSCR2 0xFCFE0404 /* System control register 2 */
#define SYSCR3 0xFCFE0408 /* System control register 3 */
/* Disable WDT */
#define WTCSR_D 0xA518
#define WTCNT_D 0x5A00
/* Enable all peripheral clocks */
#define STBCR3_D 0x00000000
#define STBCR4_D 0x00000000
#define STBCR5_D 0x00000000
#define STBCR6_D 0x00000000
#define STBCR7_D 0x00000024
#define STBCR8_D 0x00000005
#define STBCR9_D 0x00000000
#define STBCR10_D 0x00000000
#define STBCR11_D 0x000000c0
#define STBCR12_D 0x000000f0
/*
* Set all system clocks to full speed.
* On reset, the CPU will be running at 1/2 speed.
* In the Hardware Manual, see Table 6.3 Settable Frequency Ranges
*/
#define FRQCR_D 0x0035
#define FRQCR2_D 0x0001
.global lowlevel_init
.text
.align 2
lowlevel_init:
/* PL310 init */
write32 0x3fffff80, 0x00000001
/* Disable WDT */
write16 WTCSR, WTCSR_D
write16 WTCNT, WTCNT_D
/* Set clocks */
write16 FRQCR, FRQCR_D
write16 FRQCR2, FRQCR2_D
/* Enable all peripherals(Standby Control) */
write8 STBCR3, STBCR3_D
write8 STBCR4, STBCR4_D
write8 STBCR5, STBCR5_D
write8 STBCR6, STBCR6_D
write8 STBCR7, STBCR7_D
write8 STBCR8, STBCR8_D
write8 STBCR9, STBCR9_D
write8 STBCR10, STBCR10_D
write8 STBCR11, STBCR11_D
write8 STBCR12, STBCR12_D
/* For serial booting, enable read ahead caching to speed things up */
#define DRCR_0 0x3FEFA00C
write32 DRCR_0, 0x00010100 /* Read Burst ON, Length=2 */
/* Enable all internal RAM */
write8 SYSCR1, 0xFF
write8 SYSCR2, 0xFF
write8 SYSCR3, 0xFF
nop
/* back to arch calling code */
mov pc, lr
.align 4

View file

@ -20,7 +20,7 @@ configuration for This board:
You can select the configuration as follows:
- make sh7785lcr_config
- make sh7757lcr_config
This board specific command:

View file

@ -1,12 +0,0 @@
if TARGET_SH7785LCR
config SYS_BOARD
default "sh7785lcr"
config SYS_VENDOR
default "renesas"
config SYS_CONFIG_NAME
default "sh7785lcr"
endif

View file

@ -1,7 +0,0 @@
SH7785LCR BOARD
#M: -
S: Maintained
F: board/renesas/sh7785lcr/
F: include/configs/sh7785lcr.h
F: configs/sh7785lcr_defconfig
F: configs/sh7785lcr_32bit_defconfig

View file

@ -1,7 +0,0 @@
# SPDX-License-Identifier: GPL-2.0+
#
# Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
#
obj-y := sh7785lcr.o selfcheck.o rtl8169_mac.o
extra-y += lowlevel_init.o

View file

@ -1,123 +0,0 @@
========================================
Renesas Technology R0P7785LC0011RL board
========================================
This board specification:
=========================
The R0P7785LC0011RL(board config name:sh7785lcr) has the following device:
- SH7785 (SH-4A)
- DDR2-SDRAM 512MB
- NOR Flash 64MB
- 2D Graphic controller
- SATA controller
- Ethernet controller
- USB host/peripheral controller
- SD controller
- I2C controller
- RTC
This board has 2 physical memory maps. It can be changed with DIP switch(S2-5).
phys address | S2-5 = OFF | S2-5 = ON
-------------------------------+---------------+---------------
0x00000000 - 0x03ffffff(CS0) | NOR Flash | NOR Flash
0x04000000 - 0x05ffffff(CS1) | PLD | PLD
0x06000000 - 0x07ffffff(CS1) | reserved | I2C
0x08000000 - 0x0bffffff(CS2) | USB | DDR SDRAM
0x0c000000 - 0x0fffffff(CS3) | SD | DDR SDRAM
0x10000000 - 0x13ffffff(CS4) | SM107 | SM107
0x14000000 - 0x17ffffff(CS5) | I2C | USB
0x18000000 - 0x1bffffff(CS6) | reserved | SD
0x40000000 - 0x5fffffff | DDR SDRAM | (cannot use)
configuration for This board:
=============================
You can choose configuration as follows:
- make sh7785lcr_config
- make sh7785lcr_32bit_config
When you use "make sh7785lcr_config", there is build U-Boot for 29-bit
address mode. This mode can use 128MB DDR-SDRAM.
When you use "make sh7785lcr_32bit_config", there is build U-Boot for 32-bit
extended address mode. This mode can use 384MB DDR-SDRAM. And if you run
"pmb" command, this mode can use 512MB DDR-SDRAM.
* 32-bit extended address mode PMB mapping *
a) on start-up
virt | phys | size | device
-------------+---------------+---------------+---------------
0x88000000 | 0x48000000 | 384MB | DDR-SDRAM (Cacheable)
0xa0000000 | 0x00000000 | 64MB | NOR Flash
0xa4000000 | 0x04000000 | 16MB | PLD
0xa6000000 | 0x08000000 | 16MB | USB
0xa8000000 | 0x48000000 | 384MB | DDR-SDRAM (Non-cacheable)
b) after "pmb" command
virt | phys | size | device
-------------+---------------+---------------+---------------
0x80000000 | 0x40000000 | 512MB | DDR-SDRAM (Cacheable)
0xa0000000 | 0x40000000 | 512MB | DDR-SDRAM (Non-cacheable)
This board specific command:
============================
This board has the following its specific command:
- hwtest
- printmac
- setmac
- pmb (sh7785lcr_32bit_config only)
1. hwtest
This is self-check command. This command has the following options:
- all : test all hardware
- pld : output PLD version
- led : turn on LEDs
- dipsw : test DIP switch
- sm107 : output SM107 version
- net : check RTL8110 ID
- sata : check SiI3512 ID
- net : output PCI slot device ID
i.e)
=> hwtest led
turn on LEDs 3, 5, 7, 9
turn on LEDs 4, 6, 8, 10
=> hwtest net
Ethernet OK
2. printmac
This command outputs MAC address of this board.
i.e)
=> printmac
MAC = 00:00:87:**:**:**
3. setmac
This command writes MAC address of this board.
i.e)
=> setmac 00:00:87:**:**:**
4. pmb
This command change PMB for DDR-SDRAM all mapping. However you cannot use
NOR Flash and USB Host on U-Boot when you run this command.
i.e)
=> pmb

View file

@ -1,361 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
*/
#include <config.h>
#include <asm/processor.h>
#include <asm/macro.h>
#include <asm/processor.h>
.global lowlevel_init
.text
.align 2
lowlevel_init:
wait_timer WAIT_200US
wait_timer WAIT_200US
/*------- LBSC -------*/
write32 MMSELR_A, MMSELR_D
/*------- DBSC2 -------*/
write32 DBSC2_DBCONF_A, DBSC2_DBCONF_D
write32 DBSC2_DBTR0_A, DBSC2_DBTR0_D
write32 DBSC2_DBTR1_A, DBSC2_DBTR1_D
write32 DBSC2_DBTR2_A, DBSC2_DBTR2_D
write32 DBSC2_DBFREQ_A, DBSC2_DBFREQ_D1
write32 DBSC2_DBFREQ_A, DBSC2_DBFREQ_D2
wait_timer WAIT_200US
write32 DBSC2_DBDICODTOCD_A, DBSC2_DBDICODTOCD_D
write32 DBSC2_DBCMDCNT_A, DBSC2_DBCMDCNT_D_CKE_H
wait_timer WAIT_200US
write32 DBSC2_DBCMDCNT_A, DBSC2_DBCMDCNT_D_PALL
write32 DBSC2_DBMRCNT_A, DBSC2_DBMRCNT_D_EMRS2
write32 DBSC2_DBMRCNT_A, DBSC2_DBMRCNT_D_EMRS3
write32 DBSC2_DBMRCNT_A, DBSC2_DBMRCNT_D_EMRS1_1
write32 DBSC2_DBMRCNT_A, DBSC2_DBMRCNT_D_MRS_1
write32 DBSC2_DBCMDCNT_A, DBSC2_DBCMDCNT_D_PALL
write32 DBSC2_DBCMDCNT_A, DBSC2_DBCMDCNT_D_REF
write32 DBSC2_DBCMDCNT_A, DBSC2_DBCMDCNT_D_REF
write32 DBSC2_DBMRCNT_A, DBSC2_DBMRCNT_D_MRS_2
wait_timer WAIT_200US
write32 DBSC2_DBMRCNT_A, DBSC2_DBMRCNT_D_EMRS1_2
write32 DBSC2_DBMRCNT_A, DBSC2_DBMRCNT_D_EMRS1_1
write32 DBSC2_DBEN_A, DBSC2_DBEN_D
write32 DBSC2_DBRFCNT1_A, DBSC2_DBRFCNT1_D
write32 DBSC2_DBRFCNT2_A, DBSC2_DBRFCNT2_D
write32 DBSC2_DBRFCNT0_A, DBSC2_DBRFCNT0_D
wait_timer WAIT_200US
/*------- GPIO -------*/
write16 PACR_A, PXCR_D
write16 PBCR_A, PXCR_D
write16 PCCR_A, PXCR_D
write16 PDCR_A, PXCR_D
write16 PECR_A, PXCR_D
write16 PFCR_A, PXCR_D
write16 PGCR_A, PXCR_D
write16 PHCR_A, PHCR_D
write16 PJCR_A, PJCR_D
write16 PKCR_A, PKCR_D
write16 PLCR_A, PXCR_D
write16 PMCR_A, PMCR_D
write16 PNCR_A, PNCR_D
write16 PPCR_A, PXCR_D
write16 PQCR_A, PXCR_D
write16 PRCR_A, PXCR_D
write8 PEPUPR_A, PEPUPR_D
write8 PHPUPR_A, PHPUPR_D
write8 PJPUPR_A, PJPUPR_D
write8 PKPUPR_A, PKPUPR_D
write8 PLPUPR_A, PLPUPR_D
write8 PMPUPR_A, PMPUPR_D
write8 PNPUPR_A, PNPUPR_D
write16 PPUPR1_A, PPUPR1_D
write16 PPUPR2_A, PPUPR2_D
write16 P1MSELR_A, P1MSELR_D
write16 P2MSELR_A, P2MSELR_D
/*------- LBSC -------*/
write32 BCR_A, BCR_D
write32 CS0BCR_A, CS0BCR_D
write32 CS0WCR_A, CS0WCR_D
write32 CS1BCR_A, CS1BCR_D
write32 CS1WCR_A, CS1WCR_D
write32 CS4BCR_A, CS4BCR_D
write32 CS4WCR_A, CS4WCR_D
mov.l PASCR_A, r0
mov.l @r0, r2
mov.l PASCR_32BIT_MODE, r1
tst r1, r2
bt lbsc_29bit
write32 CS2BCR_A, CS_USB_BCR_D
write32 CS2WCR_A, CS_USB_WCR_D
write32 CS3BCR_A, CS_SD_BCR_D
write32 CS3WCR_A, CS_SD_WCR_D
write32 CS5BCR_A, CS_I2C_BCR_D
write32 CS5WCR_A, CS_I2C_WCR_D
write32 CS6BCR_A, CS0BCR_D
write32 CS6WCR_A, CS0WCR_D
bra lbsc_end
nop
lbsc_29bit:
write32 CS5BCR_A, CS_USB_BCR_D
write32 CS5WCR_A, CS_USB_WCR_D
write32 CS6BCR_A, CS_SD_BCR_D
write32 CS6WCR_A, CS_SD_WCR_D
lbsc_end:
#if defined(CONFIG_SH_32BIT)
/*------- set PMB -------*/
write32 PASCR_A, PASCR_29BIT_D
write32 MMUCR_A, MMUCR_D
/*****************************************************************
* ent virt phys v sz c wt
* 0 0xa0000000 0x00000000 1 64M 0 0
* 1 0xa4000000 0x04000000 1 16M 0 0
* 2 0xa6000000 0x08000000 1 16M 0 0
* 9 0x88000000 0x48000000 1 128M 1 1
* 10 0x90000000 0x50000000 1 128M 1 1
* 11 0x98000000 0x58000000 1 128M 1 1
* 13 0xa8000000 0x48000000 1 128M 0 0
* 14 0xb0000000 0x50000000 1 128M 0 0
* 15 0xb8000000 0x58000000 1 128M 0 0
*/
write32 PMB_ADDR_FLASH_A, PMB_ADDR_FLASH_D
write32 PMB_DATA_FLASH_A, PMB_DATA_FLASH_D
write32 PMB_ADDR_CPLD_A, PMB_ADDR_CPLD_D
write32 PMB_DATA_CPLD_A, PMB_DATA_CPLD_D
write32 PMB_ADDR_USB_A, PMB_ADDR_USB_D
write32 PMB_DATA_USB_A, PMB_DATA_USB_D
write32 PMB_ADDR_DDR_C1_A, PMB_ADDR_DDR_C1_D
write32 PMB_DATA_DDR_C1_A, PMB_DATA_DDR_C1_D
write32 PMB_ADDR_DDR_C2_A, PMB_ADDR_DDR_C2_D
write32 PMB_DATA_DDR_C2_A, PMB_DATA_DDR_C2_D
write32 PMB_ADDR_DDR_C3_A, PMB_ADDR_DDR_C3_D
write32 PMB_DATA_DDR_C3_A, PMB_DATA_DDR_C3_D
write32 PMB_ADDR_DDR_N1_A, PMB_ADDR_DDR_N1_D
write32 PMB_DATA_DDR_N1_A, PMB_DATA_DDR_N1_D
write32 PMB_ADDR_DDR_N2_A, PMB_ADDR_DDR_N2_D
write32 PMB_DATA_DDR_N2_A, PMB_DATA_DDR_N2_D
write32 PMB_ADDR_DDR_N3_A, PMB_ADDR_DDR_N3_D
write32 PMB_DATA_DDR_N3_A, PMB_DATA_DDR_N3_D
write32 PASCR_A, PASCR_INIT
mov.l DUMMY_ADDR, r0
icbi @r0
#endif
write32 CCR_A, CCR_D
rts
nop
.align 4
/*------- GPIO -------*/
/* P{A,B C,D,E,F,G,L,P,Q,R}CR_D */
PXCR_D: .word 0x0000
PHCR_D: .word 0x00c0
PJCR_D: .word 0xc3fc
PKCR_D: .word 0x03ff
PMCR_D: .word 0xffff
PNCR_D: .word 0xf0c3
PEPUPR_D: .long 0xff
PHPUPR_D: .long 0x00
PJPUPR_D: .long 0x00
PKPUPR_D: .long 0x00
PLPUPR_D: .long 0x00
PMPUPR_D: .long 0xfc
PNPUPR_D: .long 0x00
PPUPR1_D: .word 0xffbf
PPUPR2_D: .word 0xff00
P1MSELR_D: .word 0x3780
P2MSELR_D: .word 0x0000
#define GPIO_BASE 0xffe70000
PACR_A: .long GPIO_BASE + 0x00
PBCR_A: .long GPIO_BASE + 0x02
PCCR_A: .long GPIO_BASE + 0x04
PDCR_A: .long GPIO_BASE + 0x06
PECR_A: .long GPIO_BASE + 0x08
PFCR_A: .long GPIO_BASE + 0x0a
PGCR_A: .long GPIO_BASE + 0x0c
PHCR_A: .long GPIO_BASE + 0x0e
PJCR_A: .long GPIO_BASE + 0x10
PKCR_A: .long GPIO_BASE + 0x12
PLCR_A: .long GPIO_BASE + 0x14
PMCR_A: .long GPIO_BASE + 0x16
PNCR_A: .long GPIO_BASE + 0x18
PPCR_A: .long GPIO_BASE + 0x1a
PQCR_A: .long GPIO_BASE + 0x1c
PRCR_A: .long GPIO_BASE + 0x1e
PEPUPR_A: .long GPIO_BASE + 0x48
PHPUPR_A: .long GPIO_BASE + 0x4e
PJPUPR_A: .long GPIO_BASE + 0x50
PKPUPR_A: .long GPIO_BASE + 0x52
PLPUPR_A: .long GPIO_BASE + 0x54
PMPUPR_A: .long GPIO_BASE + 0x56
PNPUPR_A: .long GPIO_BASE + 0x58
PPUPR1_A: .long GPIO_BASE + 0x60
PPUPR2_A: .long GPIO_BASE + 0x62
P1MSELR_A: .long GPIO_BASE + 0x80
P2MSELR_A: .long GPIO_BASE + 0x82
MMSELR_A: .long 0xfc400020
#if defined(CONFIG_SH_32BIT)
MMSELR_D: .long 0xa5a50005
#else
MMSELR_D: .long 0xa5a50002
#endif
/*------- DBSC2 -------*/
#define DBSC2_BASE 0xfe800000
DBSC2_DBSTATE_A: .long DBSC2_BASE + 0x0c
DBSC2_DBEN_A: .long DBSC2_BASE + 0x10
DBSC2_DBCMDCNT_A: .long DBSC2_BASE + 0x14
DBSC2_DBCONF_A: .long DBSC2_BASE + 0x20
DBSC2_DBTR0_A: .long DBSC2_BASE + 0x30
DBSC2_DBTR1_A: .long DBSC2_BASE + 0x34
DBSC2_DBTR2_A: .long DBSC2_BASE + 0x38
DBSC2_DBRFCNT0_A: .long DBSC2_BASE + 0x40
DBSC2_DBRFCNT1_A: .long DBSC2_BASE + 0x44
DBSC2_DBRFCNT2_A: .long DBSC2_BASE + 0x48
DBSC2_DBRFSTS_A: .long DBSC2_BASE + 0x4c
DBSC2_DBFREQ_A: .long DBSC2_BASE + 0x50
DBSC2_DBDICODTOCD_A:.long DBSC2_BASE + 0x54
DBSC2_DBMRCNT_A: .long DBSC2_BASE + 0x60
DDR_DUMMY_ACCESS_A: .long 0x40000000
DBSC2_DBCONF_D: .long 0x00630002
DBSC2_DBTR0_D: .long 0x050b1f04
DBSC2_DBTR1_D: .long 0x00040204
DBSC2_DBTR2_D: .long 0x02100308
DBSC2_DBFREQ_D1: .long 0x00000000
DBSC2_DBFREQ_D2: .long 0x00000100
DBSC2_DBDICODTOCD_D:.long 0x000f0907
DBSC2_DBCMDCNT_D_CKE_H: .long 0x00000003
DBSC2_DBCMDCNT_D_PALL: .long 0x00000002
DBSC2_DBCMDCNT_D_REF: .long 0x00000004
DBSC2_DBMRCNT_D_EMRS2: .long 0x00020000
DBSC2_DBMRCNT_D_EMRS3: .long 0x00030000
DBSC2_DBMRCNT_D_EMRS1_1: .long 0x00010006
DBSC2_DBMRCNT_D_EMRS1_2: .long 0x00010386
DBSC2_DBMRCNT_D_MRS_1: .long 0x00000952
DBSC2_DBMRCNT_D_MRS_2: .long 0x00000852
DBSC2_DBEN_D: .long 0x00000001
DBSC2_DBPDCNT0_D3: .long 0x00000080
DBSC2_DBRFCNT1_D: .long 0x00000926
DBSC2_DBRFCNT2_D: .long 0x00fe00fe
DBSC2_DBRFCNT0_D: .long 0x00010000
WAIT_200US: .long 33333
/*------- LBSC -------*/
PASCR_A: .long 0xff000070
PASCR_32BIT_MODE: .long 0x80000000 /* check booting mode */
BCR_A: .long BCR
CS0BCR_A: .long CS0BCR
CS0WCR_A: .long CS0WCR
CS1BCR_A: .long CS1BCR
CS1WCR_A: .long CS1WCR
CS2BCR_A: .long CS2BCR
CS2WCR_A: .long CS2WCR
CS3BCR_A: .long CS3BCR
CS3WCR_A: .long CS3WCR
CS4BCR_A: .long CS4BCR
CS4WCR_A: .long CS4WCR
CS5BCR_A: .long CS5BCR
CS5WCR_A: .long CS5WCR
CS6BCR_A: .long CS6BCR
CS6WCR_A: .long CS6WCR
BCR_D: .long 0x80000003
CS0BCR_D: .long 0x22222340
CS0WCR_D: .long 0x00111118
CS1BCR_D: .long 0x11111100
CS1WCR_D: .long 0x33333303
CS4BCR_D: .long 0x11111300
CS4WCR_D: .long 0x00101012
/* USB setting : 32bit mode = CS2, 29bit mode = CS5 */
CS_USB_BCR_D: .long 0x11111200
CS_USB_WCR_D: .long 0x00020005
/* SD setting : 32bit mode = CS3, 29bit mode = CS6 */
CS_SD_BCR_D: .long 0x00000300
CS_SD_WCR_D: .long 0x00030108
/* I2C setting : 32bit mode = CS5, 29bit mode = CS1(already setting) */
CS_I2C_BCR_D: .long 0x11111100
CS_I2C_WCR_D: .long 0x00000003
#if defined(CONFIG_SH_32BIT)
/*------- set PMB -------*/
PMB_ADDR_FLASH_A: .long PMB_ADDR_BASE(0)
PMB_ADDR_CPLD_A: .long PMB_ADDR_BASE(1)
PMB_ADDR_USB_A: .long PMB_ADDR_BASE(2)
PMB_ADDR_DDR_C1_A: .long PMB_ADDR_BASE(9)
PMB_ADDR_DDR_C2_A: .long PMB_ADDR_BASE(10)
PMB_ADDR_DDR_C3_A: .long PMB_ADDR_BASE(11)
PMB_ADDR_DDR_N1_A: .long PMB_ADDR_BASE(13)
PMB_ADDR_DDR_N2_A: .long PMB_ADDR_BASE(14)
PMB_ADDR_DDR_N3_A: .long PMB_ADDR_BASE(15)
PMB_ADDR_FLASH_D: .long mk_pmb_addr_val(0xa0)
PMB_ADDR_CPLD_D: .long mk_pmb_addr_val(0xa4)
PMB_ADDR_USB_D: .long mk_pmb_addr_val(0xa6)
PMB_ADDR_DDR_C1_D: .long mk_pmb_addr_val(0x88)
PMB_ADDR_DDR_C2_D: .long mk_pmb_addr_val(0x90)
PMB_ADDR_DDR_C3_D: .long mk_pmb_addr_val(0x98)
PMB_ADDR_DDR_N1_D: .long mk_pmb_addr_val(0xa8)
PMB_ADDR_DDR_N2_D: .long mk_pmb_addr_val(0xb0)
PMB_ADDR_DDR_N3_D: .long mk_pmb_addr_val(0xb8)
PMB_DATA_FLASH_A: .long PMB_DATA_BASE(0)
PMB_DATA_CPLD_A: .long PMB_DATA_BASE(1)
PMB_DATA_USB_A: .long PMB_DATA_BASE(2)
PMB_DATA_DDR_C1_A: .long PMB_DATA_BASE(9)
PMB_DATA_DDR_C2_A: .long PMB_DATA_BASE(10)
PMB_DATA_DDR_C3_A: .long PMB_DATA_BASE(11)
PMB_DATA_DDR_N1_A: .long PMB_DATA_BASE(13)
PMB_DATA_DDR_N2_A: .long PMB_DATA_BASE(14)
PMB_DATA_DDR_N3_A: .long PMB_DATA_BASE(15)
/* ppn ub v s1 s0 c wt */
PMB_DATA_FLASH_D: .long mk_pmb_data_val(0x00, 1, 1, 0, 1, 0, 1)
PMB_DATA_CPLD_D: .long mk_pmb_data_val(0x04, 1, 1, 0, 0, 0, 1)
PMB_DATA_USB_D: .long mk_pmb_data_val(0x08, 1, 1, 0, 0, 0, 1)
PMB_DATA_DDR_C1_D: .long mk_pmb_data_val(0x48, 0, 1, 1, 0, 1, 1)
PMB_DATA_DDR_C2_D: .long mk_pmb_data_val(0x50, 0, 1, 1, 0, 1, 1)
PMB_DATA_DDR_C3_D: .long mk_pmb_data_val(0x58, 0, 1, 1, 0, 1, 1)
PMB_DATA_DDR_N1_D: .long mk_pmb_data_val(0x48, 1, 1, 1, 0, 0, 1)
PMB_DATA_DDR_N2_D: .long mk_pmb_data_val(0x50, 1, 1, 1, 0, 0, 1)
PMB_DATA_DDR_N3_D: .long mk_pmb_data_val(0x58, 1, 1, 1, 0, 0, 1)
DUMMY_ADDR: .long 0xa0000000
PASCR_29BIT_D: .long 0x00000000
PASCR_INIT: .long 0x80000080 /* check booting mode */
MMUCR_A: .long 0xff000010
MMUCR_D: .long 0x00000004 /* clear ITLB */
#endif /* CONFIG_SH_32BIT */
CCR_A: .long 0xff00001c
CCR_D: .long 0x0000090b

View file

@ -1,43 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
*/
#define PCIREG_8(_adr) (*(volatile unsigned char *)(_adr))
#define PCIREG_32(_adr) (*(volatile unsigned long *)(_adr))
#define PCI_PAR PCIREG_32(0xfe0401c0)
#define PCI_PDR PCIREG_32(0xfe040220)
#define PCI_CR PCIREG_32(0xfe040100)
#define PCI_CONF1 PCIREG_32(0xfe040004)
#define HIGH 1
#define LOW 0
#define PCI_PROG 0x80
#define PCI_EEP_ADDRESS (unsigned short)0x0007
#define PCI_MAC_ADDRESS_SIZE 3
#define TIME1 100
#define TIME2 20000
#define BIT_DUMMY 0
#define MAC_EEP_READ 1
#define MAC_EEP_WRITE 2
#define MAC_EEP_ERACE 3
#define MAC_EEP_EWEN 4
#define MAC_EEP_EWDS 5
/* RTL8169 */
const unsigned short EEPROM_W_Data_8169_A[] = {
0x8129, 0x10ec, 0x8169, 0x1154, 0x032b,
0x4020, 0xa101
};
const unsigned short EEPROM_W_Data_8169_B[] = {
0x4d15, 0xf7c2, 0x8000, 0x0000, 0x0000, 0x1300,
0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x2000,
0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000
};

View file

@ -1,330 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
*/
#include <common.h>
#include "rtl8169.h"
static unsigned char *PCI_MEMR;
static void mac_delay(unsigned int cnt)
{
udelay(cnt);
}
static void mac_pci_setup(void)
{
unsigned long pci_data;
PCI_PAR = 0x00000010;
PCI_PDR = 0x00001000;
PCI_PAR = 0x00000004;
pci_data = PCI_PDR;
PCI_PDR = pci_data | 0x00000007;
PCI_PAR = 0x00000010;
PCI_MEMR = (unsigned char *)((PCI_PDR | 0xFE240050) & 0xFFFFFFF0);
}
static void EECS(int level)
{
unsigned char data = *PCI_MEMR;
if (level)
*PCI_MEMR = data | 0x08;
else
*PCI_MEMR = data & 0xf7;
}
static void EECLK(int level)
{
unsigned char data = *PCI_MEMR;
if (level)
*PCI_MEMR = data | 0x04;
else
*PCI_MEMR = data & 0xfb;
}
static void EEDI(int level)
{
unsigned char data = *PCI_MEMR;
if (level)
*PCI_MEMR = data | 0x02;
else
*PCI_MEMR = data & 0xfd;
}
static inline void sh7785lcr_bitset(unsigned short bit)
{
if (bit)
EEDI(HIGH);
else
EEDI(LOW);
EECLK(LOW);
mac_delay(TIME1);
EECLK(HIGH);
mac_delay(TIME1);
EEDI(LOW);
}
static inline unsigned char sh7785lcr_bitget(void)
{
unsigned char bit;
EECLK(LOW);
mac_delay(TIME1);
bit = *PCI_MEMR & 0x01;
EECLK(HIGH);
mac_delay(TIME1);
return bit;
}
static inline void sh7785lcr_setcmd(unsigned char command)
{
sh7785lcr_bitset(BIT_DUMMY);
switch (command) {
case MAC_EEP_READ:
sh7785lcr_bitset(1);
sh7785lcr_bitset(1);
sh7785lcr_bitset(0);
break;
case MAC_EEP_WRITE:
sh7785lcr_bitset(1);
sh7785lcr_bitset(0);
sh7785lcr_bitset(1);
break;
case MAC_EEP_ERACE:
sh7785lcr_bitset(1);
sh7785lcr_bitset(1);
sh7785lcr_bitset(1);
break;
case MAC_EEP_EWEN:
sh7785lcr_bitset(1);
sh7785lcr_bitset(0);
sh7785lcr_bitset(0);
break;
case MAC_EEP_EWDS:
sh7785lcr_bitset(1);
sh7785lcr_bitset(0);
sh7785lcr_bitset(0);
break;
default:
break;
}
}
static inline unsigned short sh7785lcr_getdt(void)
{
unsigned short data = 0;
int i;
sh7785lcr_bitget(); /* DUMMY */
for (i = 0 ; i < 16 ; i++) {
data <<= 1;
data |= sh7785lcr_bitget();
}
return data;
}
static inline void sh7785lcr_setadd(unsigned short address)
{
sh7785lcr_bitset(address & 0x0020); /* A5 */
sh7785lcr_bitset(address & 0x0010); /* A4 */
sh7785lcr_bitset(address & 0x0008); /* A3 */
sh7785lcr_bitset(address & 0x0004); /* A2 */
sh7785lcr_bitset(address & 0x0002); /* A1 */
sh7785lcr_bitset(address & 0x0001); /* A0 */
}
static inline void sh7785lcr_setdata(unsigned short data)
{
sh7785lcr_bitset(data & 0x8000);
sh7785lcr_bitset(data & 0x4000);
sh7785lcr_bitset(data & 0x2000);
sh7785lcr_bitset(data & 0x1000);
sh7785lcr_bitset(data & 0x0800);
sh7785lcr_bitset(data & 0x0400);
sh7785lcr_bitset(data & 0x0200);
sh7785lcr_bitset(data & 0x0100);
sh7785lcr_bitset(data & 0x0080);
sh7785lcr_bitset(data & 0x0040);
sh7785lcr_bitset(data & 0x0020);
sh7785lcr_bitset(data & 0x0010);
sh7785lcr_bitset(data & 0x0008);
sh7785lcr_bitset(data & 0x0004);
sh7785lcr_bitset(data & 0x0002);
sh7785lcr_bitset(data & 0x0001);
}
static void sh7785lcr_datawrite(const unsigned short *data, unsigned short address,
unsigned int count)
{
unsigned int i;
for (i = 0; i < count; i++) {
EECS(HIGH);
EEDI(LOW);
mac_delay(TIME1);
sh7785lcr_setcmd(MAC_EEP_WRITE);
sh7785lcr_setadd(address++);
sh7785lcr_setdata(*(data + i));
EECLK(LOW);
EEDI(LOW);
EECS(LOW);
mac_delay(TIME2);
}
}
static void sh7785lcr_macerase(void)
{
unsigned int i;
unsigned short pci_address = 7;
for (i = 0; i < 3; i++) {
EECS(HIGH);
EEDI(LOW);
mac_delay(TIME1);
sh7785lcr_setcmd(MAC_EEP_ERACE);
sh7785lcr_setadd(pci_address++);
mac_delay(TIME1);
EECLK(LOW);
EEDI(LOW);
EECS(LOW);
}
mac_delay(TIME2);
printf("\n\nErace End\n");
for (i = 0; i < 10; i++)
mac_delay(TIME2);
}
static void sh7785lcr_macwrite(unsigned short *data)
{
sh7785lcr_macerase();
sh7785lcr_datawrite(EEPROM_W_Data_8169_A, 0x0000, 7);
sh7785lcr_datawrite(data, PCI_EEP_ADDRESS, PCI_MAC_ADDRESS_SIZE);
sh7785lcr_datawrite(EEPROM_W_Data_8169_B, 0x000a, 54);
}
void sh7785lcr_macdtrd(unsigned char *buf, unsigned short address, unsigned int count)
{
unsigned int i;
unsigned short wk;
for (i = 0 ; i < count; i++) {
EECS(HIGH);
EEDI(LOW);
mac_delay(TIME1);
sh7785lcr_setcmd(MAC_EEP_READ);
sh7785lcr_setadd(address++);
wk = sh7785lcr_getdt();
*buf++ = (unsigned char)(wk & 0xff);
*buf++ = (unsigned char)((wk >> 8) & 0xff);
EECLK(LOW);
EEDI(LOW);
EECS(LOW);
}
}
static void sh7785lcr_macadrd(unsigned char *buf)
{
*PCI_MEMR = PCI_PROG;
sh7785lcr_macdtrd(buf, PCI_EEP_ADDRESS, PCI_MAC_ADDRESS_SIZE);
}
static void sh7785lcr_eepewen(void)
{
*PCI_MEMR = PCI_PROG;
mac_delay(TIME1);
EECS(LOW);
EECLK(LOW);
EEDI(LOW);
EECS(HIGH);
mac_delay(TIME1);
sh7785lcr_setcmd(MAC_EEP_EWEN);
sh7785lcr_bitset(1);
sh7785lcr_bitset(1);
sh7785lcr_bitset(BIT_DUMMY);
sh7785lcr_bitset(BIT_DUMMY);
sh7785lcr_bitset(BIT_DUMMY);
sh7785lcr_bitset(BIT_DUMMY);
EECLK(LOW);
EEDI(LOW);
EECS(LOW);
mac_delay(TIME1);
}
void mac_write(unsigned short *data)
{
mac_pci_setup();
sh7785lcr_eepewen();
sh7785lcr_macwrite(data);
}
void mac_read(void)
{
unsigned char data[6];
mac_pci_setup();
sh7785lcr_macadrd(data);
printf("Mac = %02x:%02x:%02x:%02x:%02x:%02x\n",
data[0], data[1], data[2], data[3], data[4], data[5]);
}
int do_set_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int i;
unsigned char mac[6];
char *s, *e;
if (argc != 2)
return cmd_usage(cmdtp);
s = argv[1];
for (i = 0; i < 6; i++) {
mac[i] = s ? simple_strtoul(s, &e, 16) : 0;
if (s)
s = (*e) ? e + 1 : e;
}
mac_write((unsigned short *)mac);
return 0;
}
U_BOOT_CMD(
setmac, 2, 1, do_set_mac,
"write MAC address for RTL8110SCL",
"\n"
"setmac <mac address> - write MAC address for RTL8110SCL"
);
int do_print_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
if (argc != 1)
return cmd_usage(cmdtp);
mac_read();
return 0;
}
U_BOOT_CMD(
printmac, 1, 1, do_print_mac,
"print MAC address for RTL8110",
"\n"
" - print MAC address for RTL8110"
);

View file

@ -1,150 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
*/
#include <common.h>
#include <console.h>
#include <asm/io.h>
#include <asm/processor.h>
#include <asm/pci.h>
#if defined(CONFIG_CPU_32BIT)
#define NOCACHE_OFFSET 0x00000000
#else
#define NOCACHE_OFFSET 0xa0000000
#endif
#define PLD_LEDCR (0x04000008 + NOCACHE_OFFSET)
#define PLD_SWSR (0x0400000a + NOCACHE_OFFSET)
#define PLD_VERSR (0x0400000c + NOCACHE_OFFSET)
#define SM107_DEVICEID (0x13e00060 + NOCACHE_OFFSET)
static void test_pld(void)
{
printf("PLD version = %04x\n", readb(PLD_VERSR));
}
static void test_sm107(void)
{
printf("SM107 device ID = %04x\n", readl(SM107_DEVICEID));
}
static void test_led(void)
{
printf("turn on LEDs 3, 5, 7, 9\n");
writeb(0x55, PLD_LEDCR);
mdelay(2000);
printf("turn on LEDs 4, 6, 8, 10\n");
writeb(0xaa, PLD_LEDCR);
mdelay(2000);
writeb(0x00, PLD_LEDCR);
}
static void test_dipsw(void)
{
printf("Please DIPSW set = B'0101\n");
while (readb(PLD_SWSR) != 0x05) {
if (ctrlc())
return;
}
printf("Please DIPSW set = B'1010\n");
while (readb(PLD_SWSR) != 0x0A) {
if (ctrlc())
return;
}
printf("DIPSW OK\n");
}
static void test_net(void)
{
unsigned long data;
writel(0x80000000, 0xfe0401c0);
data = readl(0xfe040220);
if (data == 0x816910ec)
printf("Ethernet OK\n");
else
printf("Ethernet NG, data = %08x\n", (unsigned int)data);
}
static void test_sata(void)
{
unsigned long data;
writel(0x80000800, 0xfe0401c0);
data = readl(0xfe040220);
if (data == 0x35121095)
printf("SATA OK\n");
else
printf("SATA NG, data = %08x\n", (unsigned int)data);
}
static void test_pci(void)
{
writel(0x80001800, 0xfe0401c0);
printf("PCI CN1 ID = %08x\n", readl(0xfe040220));
writel(0x80001000, 0xfe0401c0);
printf("PCI CN2 ID = %08x\n", readl(0xfe040220));
}
int do_hw_test(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
char *cmd;
if (argc != 2)
return cmd_usage(cmdtp);
cmd = argv[1];
switch (cmd[0]) {
case 'a': /* all */
test_pld();
test_led();
test_dipsw();
test_sm107();
test_net();
test_sata();
test_pci();
break;
case 'p': /* pld or pci */
if (cmd[1] == 'l')
test_pld();
else
test_pci();
break;
case 'l': /* led */
test_led();
break;
case 'd': /* dipsw */
test_dipsw();
break;
case 's': /* sm107 or sata */
if (cmd[1] == 'm')
test_sm107();
else
test_sata();
break;
case 'n': /* net */
test_net();
break;
default:
return cmd_usage(cmdtp);
}
return 0;
}
U_BOOT_CMD(
hwtest, 2, 1, do_hw_test,
"hardware test for R0P7785LC0011RL board",
"\n"
"hwtest all - test all hardware\n"
"hwtest pld - output PLD version\n"
"hwtest led - turn on LEDs\n"
"hwtest dipsw - test DIP switch\n"
"hwtest sm107 - output SM107 version\n"
"hwtest net - check RTL8110 ID\n"
"hwtest sata - check SiI3512 ID\n"
"hwtest pci - output PCI slot device ID"
);

View file

@ -1,63 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
*/
#include <common.h>
#include <asm/io.h>
#include <asm/processor.h>
#include <asm/pci.h>
#include <netdev.h>
int checkboard(void)
{
puts("BOARD: Renesas Technology Corp. R0P7785LC0011RL\n");
return 0;
}
int board_init(void)
{
return 0;
}
static struct pci_controller hose;
void pci_init_board(void)
{
pci_sh7780_init(&hose);
}
int board_eth_init(bd_t *bis)
{
return pci_eth_init(bis);
}
#if defined(CONFIG_SH_32BIT)
int do_pmb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
/* clear ITLB */
writel(0x00000004, 0xff000010);
/* delete PMB for peripheral */
writel(0, PMB_ADDR_BASE(0));
writel(0, PMB_DATA_BASE(0));
writel(0, PMB_ADDR_BASE(1));
writel(0, PMB_DATA_BASE(1));
writel(0, PMB_ADDR_BASE(2));
writel(0, PMB_DATA_BASE(2));
/* add PMB for SDRAM(0x40000000 - 0x47ffffff) */
writel(mk_pmb_addr_val(0x80), PMB_ADDR_BASE(8));
writel(mk_pmb_data_val(0x40, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(8));
writel(mk_pmb_addr_val(0xa0), PMB_ADDR_BASE(12));
writel(mk_pmb_data_val(0x40, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(12));
return 0;
}
U_BOOT_CMD(
pmb, 1, 1, do_pmb,
"pmb - PMB setting\n",
"\n"
" - PMB setting for all SDRAM mapping"
);
#endif

View file

@ -1,40 +0,0 @@
CONFIG_SH=y
CONFIG_SYS_TEXT_BASE=0x8FFC0000
CONFIG_TARGET_ECOVEC=y
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttySC0,115200"
CONFIG_VERSION_VARIABLE=y
# CONFIG_CMDLINE_EDITING is not set
# CONFIG_AUTO_COMPLETE is not set
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_CONSOLE is not set
# CONFIG_CMD_BOOTD is not set
# CONFIG_CMD_RUN is not set
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_EDITENV is not set
# CONFIG_CMD_ENV_EXISTS is not set
CONFIG_CMD_I2C=y
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_SDRAM=y
CONFIG_CMD_USB=y
# CONFIG_CMD_ECHO is not set
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SOURCE is not set
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
# CONFIG_CMD_MISC is not set
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_SH_ETHER=y
CONFIG_SCIF_CONSOLE=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
CONFIG_USE_PRIVATE_LIBGCC=y

53
configs/grpeach_defconfig Normal file
View file

@ -0,0 +1,53 @@
CONFIG_ARM=y
# CONFIG_SPL_SYS_THUMB_BUILD is not set
CONFIG_ARCH_RMOBILE=y
CONFIG_SYS_TEXT_BASE=0x18000000
CONFIG_RZA1=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_BOOTDELAY=3
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_ELF is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_SF=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_MAC_PARTITION=y
CONFIG_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="r7s72100-gr-peach-u-boot"
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_USE_ENV_SPI_BUS=y
CONFIG_ENV_SPI_BUS=0
CONFIG_USE_ENV_SPI_CS=y
CONFIG_ENV_SPI_CS=0
CONFIG_USE_ENV_SPI_MAX_HZ=y
CONFIG_ENV_SPI_MAX_HZ=50000000
CONFIG_USE_ENV_SPI_MODE=y
CONFIG_ENV_SPI_MODE=0x0
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_HAVE_BLOCK_DEVICE=y
CONFIG_DM_GPIO=y
CONFIG_RZA1_GPIO=y
CONFIG_LED=y
CONFIG_LED_GPIO=y
# CONFIG_MMC is not set
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_MACRONIX=y
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_DM_ETH=y
CONFIG_SH_ETHER=y
CONFIG_PINCTRL=y
CONFIG_SCIF_CONSOLE=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_RENESAS_RPC_SPI=y
CONFIG_TIMER=y
CONFIG_RENESAS_OSTM_TIMER=y
CONFIG_OF_LIBFDT_OVERLAY=y
# CONFIG_EFI_LOADER is not set

View file

@ -1,40 +0,0 @@
CONFIG_SH=y
CONFIG_SYS_TEXT_BASE=0x8FF80000
CONFIG_SH_32BIT=y
CONFIG_TARGET_SH7785LCR=y
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttySC1,115200 root=/dev/nfs ip=dhcp"
CONFIG_VERSION_VARIABLE=y
# CONFIG_CMDLINE_EDITING is not set
# CONFIG_AUTO_COMPLETE is not set
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_CONSOLE is not set
# CONFIG_CMD_BOOTD is not set
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_EDITENV is not set
# CONFIG_CMD_ENV_EXISTS is not set
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_PCI=y
CONFIG_CMD_SDRAM=y
CONFIG_CMD_USB=y
# CONFIG_CMD_ECHO is not set
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SOURCE is not set
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_PING=y
# CONFIG_CMD_MISC is not set
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_MAC_PARTITION=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_PCI=y
CONFIG_SCIF_CONSOLE=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
CONFIG_USE_PRIVATE_LIBGCC=y

View file

@ -1,39 +0,0 @@
CONFIG_SH=y
CONFIG_SYS_TEXT_BASE=0x0FF80000
CONFIG_TARGET_SH7785LCR=y
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttySC1,115200 root=/dev/nfs ip=dhcp"
CONFIG_VERSION_VARIABLE=y
# CONFIG_CMDLINE_EDITING is not set
# CONFIG_AUTO_COMPLETE is not set
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_CONSOLE is not set
# CONFIG_CMD_BOOTD is not set
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_EDITENV is not set
# CONFIG_CMD_ENV_EXISTS is not set
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_PCI=y
CONFIG_CMD_SDRAM=y
CONFIG_CMD_USB=y
# CONFIG_CMD_ECHO is not set
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SOURCE is not set
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_PING=y
# CONFIG_CMD_MISC is not set
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_MAC_PARTITION=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_PCI=y
CONFIG_SCIF_CONSOLE=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
CONFIG_USE_PRIVATE_LIBGCC=y

View file

@ -94,7 +94,6 @@ U-Boot for Renesas SuperH
I plan to support the following CPUs and boards.
5.1. CPUs
- SH7751R(SH4)
- SH7785(SH4)
5.2. Boards
- Many boards ;-)

View file

@ -169,6 +169,12 @@ config RCAR_GPIO
help
This driver supports the GPIO banks on Renesas RCar SoCs.
config RZA1_GPIO
bool "Renesas RZ/A1 GPIO driver"
depends on DM_GPIO && RZA1
help
This driver supports the GPIO banks on Renesas RZ/A1 R7S72100 SoCs.
config ROCKCHIP_GPIO
bool "Rockchip GPIO driver"
depends on DM_GPIO

View file

@ -27,6 +27,7 @@ obj-$(CONFIG_PCA953X) += pca953x.o
obj-$(CONFIG_PCA9698) += pca9698.o
obj-$(CONFIG_ROCKCHIP_GPIO) += rk_gpio.o
obj-$(CONFIG_RCAR_GPIO) += gpio-rcar.o
obj-$(CONFIG_RZA1_GPIO) += gpio-rza1.o
obj-$(CONFIG_S5P) += s5p_gpio.o
obj-$(CONFIG_SANDBOX_GPIO) += sandbox.o
obj-$(CONFIG_SPEAR_GPIO) += spear_gpio.o

134
drivers/gpio/gpio-rza1.c Normal file
View file

@ -0,0 +1,134 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2019 Marek Vasut <marek.vasut@gmail.com>
*/
#include <common.h>
#include <clk.h>
#include <dm.h>
#include <errno.h>
#include <asm/gpio.h>
#include <asm/io.h>
#define P(bank) (0x0000 + (bank) * 4)
#define PSR(bank) (0x0100 + (bank) * 4)
#define PPR(bank) (0x0200 + (bank) * 4)
#define PM(bank) (0x0300 + (bank) * 4)
#define PMC(bank) (0x0400 + (bank) * 4)
#define PFC(bank) (0x0500 + (bank) * 4)
#define PFCE(bank) (0x0600 + (bank) * 4)
#define PNOT(bank) (0x0700 + (bank) * 4)
#define PMSR(bank) (0x0800 + (bank) * 4)
#define PMCSR(bank) (0x0900 + (bank) * 4)
#define PFCAE(bank) (0x0A00 + (bank) * 4)
#define PIBC(bank) (0x4000 + (bank) * 4)
#define PBDC(bank) (0x4100 + (bank) * 4)
#define PIPC(bank) (0x4200 + (bank) * 4)
#define RZA1_MAX_GPIO_PER_BANK 16
DECLARE_GLOBAL_DATA_PTR;
struct r7s72100_gpio_priv {
void __iomem *regs;
int bank;
};
static int r7s72100_gpio_get_value(struct udevice *dev, unsigned offset)
{
struct r7s72100_gpio_priv *priv = dev_get_priv(dev);
return !!(readw(priv->regs + PPR(priv->bank)) & BIT(offset));
}
static int r7s72100_gpio_set_value(struct udevice *dev, unsigned line,
int value)
{
struct r7s72100_gpio_priv *priv = dev_get_priv(dev);
writel(BIT(line + 16) | (value ? BIT(line) : 0),
priv->regs + PSR(priv->bank));
return 0;
}
static void r7s72100_gpio_set_direction(struct udevice *dev, unsigned line,
bool output)
{
struct r7s72100_gpio_priv *priv = dev_get_priv(dev);
writel(BIT(line + 16), priv->regs + PMCSR(priv->bank));
writel(BIT(line + 16) | (output ? 0 : BIT(line)),
priv->regs + PMSR(priv->bank));
clrsetbits_le16(priv->regs + PIBC(priv->bank), BIT(line),
output ? 0 : BIT(line));
}
static int r7s72100_gpio_direction_input(struct udevice *dev, unsigned offset)
{
r7s72100_gpio_set_direction(dev, offset, false);
return 0;
}
static int r7s72100_gpio_direction_output(struct udevice *dev, unsigned offset,
int value)
{
/* write GPIO value to output before selecting output mode of pin */
r7s72100_gpio_set_value(dev, offset, value);
r7s72100_gpio_set_direction(dev, offset, true);
return 0;
}
static int r7s72100_gpio_get_function(struct udevice *dev, unsigned offset)
{
struct r7s72100_gpio_priv *priv = dev_get_priv(dev);
if (readw(priv->regs + PM(priv->bank)) & BIT(offset))
return GPIOF_INPUT;
else
return GPIOF_OUTPUT;
}
static const struct dm_gpio_ops r7s72100_gpio_ops = {
.direction_input = r7s72100_gpio_direction_input,
.direction_output = r7s72100_gpio_direction_output,
.get_value = r7s72100_gpio_get_value,
.set_value = r7s72100_gpio_set_value,
.get_function = r7s72100_gpio_get_function,
};
static int r7s72100_gpio_probe(struct udevice *dev)
{
struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
struct r7s72100_gpio_priv *priv = dev_get_priv(dev);
struct fdtdec_phandle_args args;
int node = dev_of_offset(dev);
int ret;
fdt_addr_t addr_base;
uc_priv->bank_name = dev->name;
dev = dev_get_parent(dev);
addr_base = devfdt_get_addr(dev);
if (addr_base == FDT_ADDR_T_NONE)
return -EINVAL;
priv->regs = (void __iomem *)addr_base;
ret = fdtdec_parse_phandle_with_args(gd->fdt_blob, node, "gpio-ranges",
NULL, 3, 0, &args);
priv->bank = ret == 0 ? (args.args[1] / RZA1_MAX_GPIO_PER_BANK) : -1;
uc_priv->gpio_count = ret == 0 ? args.args[2] : RZA1_MAX_GPIO_PER_BANK;
return 0;
}
U_BOOT_DRIVER(r7s72100_gpio) = {
.name = "r7s72100-gpio",
.id = UCLASS_GPIO,
.ops = &r7s72100_gpio_ops,
.priv_auto_alloc_size = sizeof(struct r7s72100_gpio_priv),
.probe = r7s72100_gpio_probe,
};

View file

@ -425,7 +425,7 @@ static int sh_eth_phy_regs_config(struct sh_eth_dev *eth)
sh_eth_write(port_info, GECMR_100B, GECMR);
#elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752)
sh_eth_write(port_info, 1, RTRATE);
#elif defined(CONFIG_CPU_SH7724) || defined(CONFIG_RCAR_GEN2)
#elif defined(CONFIG_RCAR_GEN2)
val = ECMR_RTM;
#endif
} else if (phy->speed == 10) {
@ -806,9 +806,11 @@ static int sh_ether_probe(struct udevice *udev)
priv->iobase = pdata->iobase;
#if CONFIG_IS_ENABLED(CLK)
ret = clk_get_by_index(udev, 0, &priv->clk);
if (ret < 0)
return ret;
#endif
ret = dev_read_phandle_with_args(udev, "phy-handle", NULL, 0, 0, &phandle_args);
if (!ret) {
@ -843,9 +845,11 @@ static int sh_ether_probe(struct udevice *udev)
eth->port_info[eth->port].iobase =
(void __iomem *)(BASE_IO_ADDR + 0x800 * eth->port);
#if CONFIG_IS_ENABLED(CLK)
ret = clk_enable(&priv->clk);
if (ret)
goto err_mdio_register;
#endif
ret = sh_eth_phy_config(udev);
if (ret) {
@ -856,7 +860,9 @@ static int sh_ether_probe(struct udevice *udev)
return 0;
err_phy_config:
#if CONFIG_IS_ENABLED(CLK)
clk_disable(&priv->clk);
#endif
err_mdio_register:
mdio_free(mdiodev);
return ret;
@ -868,7 +874,9 @@ static int sh_ether_remove(struct udevice *udev)
struct sh_eth_dev *eth = &priv->shdev;
struct sh_eth_info *port_info = &eth->port_info[eth->port];
#if CONFIG_IS_ENABLED(CLK)
clk_disable(&priv->clk);
#endif
free(port_info->phydev);
mdio_unregister(priv->bus);
mdio_free(priv->bus);
@ -917,6 +925,7 @@ int sh_ether_ofdata_to_platdata(struct udevice *dev)
}
static const struct udevice_id sh_ether_ids[] = {
{ .compatible = "renesas,ether-r7s72100" },
{ .compatible = "renesas,ether-r8a7790" },
{ .compatible = "renesas,ether-r8a7791" },
{ .compatible = "renesas,ether-r8a7793" },

View file

@ -228,6 +228,60 @@ static const u16 sh_eth_offset_gigabit[SH_ETH_MAX_REGISTER_OFFSET] = {
[RMII_MII] = 0x0790,
};
static const u16 sh_eth_offset_rz[SH_ETH_MAX_REGISTER_OFFSET] = {
[EDSR] = 0x0000,
[EDMR] = 0x0400,
[EDTRR] = 0x0408,
[EDRRR] = 0x0410,
[EESR] = 0x0428,
[EESIPR] = 0x0430,
[TDLAR] = 0x0010,
[TDFAR] = 0x0014,
[TDFXR] = 0x0018,
[TDFFR] = 0x001c,
[RDLAR] = 0x0030,
[RDFAR] = 0x0034,
[RDFXR] = 0x0038,
[RDFFR] = 0x003c,
[TRSCER] = 0x0438,
[RMFCR] = 0x0440,
[TFTR] = 0x0448,
[FDR] = 0x0450,
[RMCR] = 0x0458,
[RPADIR] = 0x0460,
[FCFTR] = 0x0468,
[CSMR] = 0x04E4,
[ECMR] = 0x0500,
[ECSR] = 0x0510,
[ECSIPR] = 0x0518,
[PIR] = 0x0520,
[PSR] = 0x0528,
[PIPR] = 0x052c,
[RFLR] = 0x0508,
[APR] = 0x0554,
[MPR] = 0x0558,
[PFTCR] = 0x055c,
[PFRCR] = 0x0560,
[TPAUSER] = 0x0564,
[GECMR] = 0x05b0,
[BCULR] = 0x05b4,
[MAHR] = 0x05c0,
[MALR] = 0x05c8,
[TROCR] = 0x0700,
[CDCR] = 0x0708,
[LCCR] = 0x0710,
[CEFCR] = 0x0740,
[FRECR] = 0x0748,
[TSFRCR] = 0x0750,
[TLFRCR] = 0x0758,
[RFCR] = 0x0760,
[CERCR] = 0x0768,
[CEECR] = 0x0770,
[MAFCR] = 0x0778,
[RMII_MII] = 0x0790,
};
static const u16 sh_eth_offset_fast_sh4[SH_ETH_MAX_REGISTER_OFFSET] = {
[ECMR] = 0x0100,
[RFLR] = 0x0108,
@ -295,9 +349,6 @@ static const u16 sh_eth_offset_fast_sh4[SH_ETH_MAX_REGISTER_OFFSET] = {
#define SH_ETH_TYPE_ETHER
#define BASE_IO_ADDR 0xfef00000
#endif
#elif defined(CONFIG_CPU_SH7724)
#define SH_ETH_TYPE_ETHER
#define BASE_IO_ADDR 0xA4600000
#elif defined(CONFIG_R8A7740)
#define SH_ETH_TYPE_GETHER
#define BASE_IO_ADDR 0xE9A00000
@ -606,6 +657,8 @@ static inline unsigned long sh_eth_reg_addr(struct sh_eth_info *port,
const u16 *reg_offset = sh_eth_offset_gigabit;
#elif defined(SH_ETH_TYPE_ETHER)
const u16 *reg_offset = sh_eth_offset_fast_sh4;
#elif defined(SH_ETH_TYPE_RZ)
const u16 *reg_offset = sh_eth_offset_rz;
#else
#error
#endif

View file

@ -3,6 +3,7 @@ if ARCH_RMOBILE
config PINCTRL_PFC
bool "Renesas pin control drivers"
depends on DM && ARCH_RMOBILE
default n if CPU_RZA1
help
Enable support for clock present on Renesas RCar SoCs.
@ -116,4 +117,15 @@ config PINCTRL_PFC_R8A77995
the GPIO definitions and pin control functions for each available
multiplex function.
config PINCTRL_PFC_R7S72100
bool "Renesas RZ/A1 R7S72100 pin control driver"
depends on CPU_RZA1
default y if CPU_RZA1
help
Support pin multiplexing control on Renesas RZ/A1 R7S72100 SoCs.
The driver is controlled by a device tree node which contains both
the GPIO definitions and pin control functions for each available
multiplex function.
endif

View file

@ -10,3 +10,4 @@ obj-$(CONFIG_PINCTRL_PFC_R8A77965) += pfc-r8a77965.o
obj-$(CONFIG_PINCTRL_PFC_R8A77970) += pfc-r8a77970.o
obj-$(CONFIG_PINCTRL_PFC_R8A77990) += pfc-r8a77990.o
obj-$(CONFIG_PINCTRL_PFC_R8A77995) += pfc-r8a77995.o
obj-$(CONFIG_PINCTRL_PFC_R7S72100) += pfc-r7s72100.o

View file

@ -0,0 +1,146 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* R7S72100 processor support
*
* Copyright (C) 2019 Marek Vasut <marek.vasut@gmail.com>
*/
#include <common.h>
#include <dm.h>
#include <dm/lists.h>
#include <dm/pinctrl.h>
#include <linux/io.h>
#include <linux/err.h>
#define P(bank) (0x0000 + (bank) * 4)
#define PSR(bank) (0x0100 + (bank) * 4)
#define PPR(bank) (0x0200 + (bank) * 4)
#define PM(bank) (0x0300 + (bank) * 4)
#define PMC(bank) (0x0400 + (bank) * 4)
#define PFC(bank) (0x0500 + (bank) * 4)
#define PFCE(bank) (0x0600 + (bank) * 4)
#define PNOT(bank) (0x0700 + (bank) * 4)
#define PMSR(bank) (0x0800 + (bank) * 4)
#define PMCSR(bank) (0x0900 + (bank) * 4)
#define PFCAE(bank) (0x0A00 + (bank) * 4)
#define PIBC(bank) (0x4000 + (bank) * 4)
#define PBDC(bank) (0x4100 + (bank) * 4)
#define PIPC(bank) (0x4200 + (bank) * 4)
#define RZA1_PINS_PER_PORT 16
DECLARE_GLOBAL_DATA_PTR;
struct r7s72100_pfc_platdata {
void __iomem *base;
};
static void r7s72100_pfc_set_function(struct udevice *dev, u16 bank, u16 line,
u16 func, u16 inbuf, u16 bidir)
{
struct r7s72100_pfc_platdata *plat = dev_get_platdata(dev);
clrsetbits_le16(plat->base + PFCAE(bank), BIT(line),
(func & BIT(2)) ? BIT(line) : 0);
clrsetbits_le16(plat->base + PFCE(bank), BIT(line),
(func & BIT(1)) ? BIT(line) : 0);
clrsetbits_le16(plat->base + PFC(bank), BIT(line),
(func & BIT(0)) ? BIT(line) : 0);
clrsetbits_le16(plat->base + PIBC(bank), BIT(line),
inbuf ? BIT(line) : 0);
clrsetbits_le16(plat->base + PBDC(bank), BIT(line),
bidir ? BIT(line) : 0);
setbits_le32(plat->base + PMCSR(bank), BIT(line + 16) | BIT(line));
setbits_le16(plat->base + PIPC(bank), BIT(line));
}
static int r7s72100_pfc_set_state(struct udevice *dev, struct udevice *config)
{
const void *blob = gd->fdt_blob;
int node = dev_of_offset(config);
u32 cells[32];
u16 bank, line, func;
int i, count, bidir;
count = fdtdec_get_int_array_count(blob, node, "pinmux",
cells, ARRAY_SIZE(cells));
if (count < 0) {
printf("%s: bad pinmux array %d\n", __func__, count);
return -EINVAL;
}
if (count > ARRAY_SIZE(cells)) {
printf("%s: unsupported pinmux array count %d\n",
__func__, count);
return -EINVAL;
}
for (i = 0 ; i < count; i++) {
func = (cells[i] >> 16) & 0xf;
if (func == 0 || func > 8) {
printf("Invalid cell %i in node %s!\n",
count, ofnode_get_name(dev_ofnode(config)));
continue;
}
func = (func - 1) & 0x7;
bank = (cells[i] / RZA1_PINS_PER_PORT) & 0xff;
line = cells[i] % RZA1_PINS_PER_PORT;
bidir = 0;
if (bank == 3 && line == 3 && func == 1)
bidir = 1;
r7s72100_pfc_set_function(dev, bank, line, func, 0, bidir);
}
return 0;
}
const struct pinctrl_ops r7s72100_pfc_ops = {
.set_state = r7s72100_pfc_set_state,
};
static int r7s72100_pfc_probe(struct udevice *dev)
{
struct r7s72100_pfc_platdata *plat = dev_get_platdata(dev);
fdt_addr_t addr_base;
ofnode node;
addr_base = devfdt_get_addr(dev);
if (addr_base == FDT_ADDR_T_NONE)
return -EINVAL;
plat->base = (void __iomem *)addr_base;
dev_for_each_subnode(node, dev) {
struct udevice *cdev;
if (!ofnode_read_bool(node, "gpio-controller"))
continue;
device_bind_driver_to_node(dev, "r7s72100-gpio",
ofnode_get_name(node),
node, &cdev);
}
return 0;
}
static const struct udevice_id r7s72100_pfc_match[] = {
{ .compatible = "renesas,r7s72100-ports" },
{}
};
U_BOOT_DRIVER(r7s72100_pfc) = {
.name = "r7s72100_pfc",
.id = UCLASS_PINCTRL,
.of_match = r7s72100_pfc_match,
.probe = r7s72100_pfc_probe,
.platdata_auto_alloc_size = sizeof(struct r7s72100_pfc_platdata),
.ops = &r7s72100_pfc_ops,
};

View file

@ -21,7 +21,6 @@ DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_CPU_SH7760) || \
defined(CONFIG_CPU_SH7780) || \
defined(CONFIG_CPU_SH7785) || \
defined(CONFIG_CPU_SH7786)
static int scif_rxfill(struct uart_port *port)
{
@ -63,6 +62,9 @@ static void sh_serial_init_generic(struct uart_port *port)
sci_out(port, SCFCR, SCFCR_RFRST|SCFCR_TFRST);
sci_in(port, SCFCR);
sci_out(port, SCFCR, 0);
#if defined(CONFIG_RZA1)
sci_out(port, SCSPTR, 0x0003);
#endif
}
static void

View file

@ -107,11 +107,6 @@ struct uart_port {
# define SCSPTR5 0xa4050128
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
#elif defined(CONFIG_CPU_SH7724)
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) ((port)->type == PORT_SCIFA ? \
0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ : \
0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */)
#elif defined(CONFIG_CPU_SH7734)
# define SCSPTR0 0xFFE40020
# define SCSPTR1 0xFFE41020
@ -175,8 +170,7 @@ struct uart_port {
# define SCSCR_INIT(port) 0x3a
#endif
#elif defined(CONFIG_CPU_SH7785) || \
defined(CONFIG_CPU_SH7786)
#elif defined(CONFIG_CPU_SH7786)
# define SCSPTR0 0xffea0024 /* 16 bit SCIF */
# define SCSPTR1 0xffeb0024 /* 16 bit SCIF */
# define SCSPTR2 0xffec0024 /* 16 bit SCIF */
@ -201,7 +195,7 @@ struct uart_port {
# define SCSPTR7 0xfffeB820 /* 16 bit SCIF */
# endif
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
#elif defined(CONFIG_CPU_SH7269)
#elif defined(CONFIG_CPU_SH7269) || defined(CONFIG_RZA1)
# define SCSPTR0 0xe8007020 /* 16 bit SCIF */
# define SCSPTR1 0xe8007820 /* 16 bit SCIF */
# define SCSPTR2 0xe8008020 /* 16 bit SCIF */
@ -211,6 +205,7 @@ struct uart_port {
# define SCSPTR6 0xe800a020 /* 16 bit SCIF */
# define SCSPTR7 0xe800a820 /* 16 bit SCIF */
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
# define SCIF_ORER 0x0001 /* overrun error bit */
#elif defined(CONFIG_CPU_SH7619)
# define SCSPTR0 0xf8400020 /* 16 bit SCIF */
# define SCSPTR1 0xf8410020 /* 16 bit SCIF */
@ -252,12 +247,9 @@ struct uart_port {
defined(CONFIG_CPU_SH7751R) || \
defined(CONFIG_CPU_SH7763) || \
defined(CONFIG_CPU_SH7780) || \
defined(CONFIG_CPU_SH7785) || \
defined(CONFIG_CPU_SH7786) || \
defined(CONFIG_CPU_SHX3)
#define SCI_CTRL_FLAGS_REIE 0x08 /* 7750 SCIF */
#elif defined(CONFIG_CPU_SH7724)
#define SCI_CTRL_FLAGS_REIE ((port)->type == PORT_SCIFA ? 0 : 8)
#else
#define SCI_CTRL_FLAGS_REIE 0
#endif
@ -494,7 +486,7 @@ static inline void sci_##name##_out(struct uart_port *port,\
#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size,\
sh4_scif_offset, sh4_scif_size) \
CPU_SCIF_FNS(name)
#elif defined(CONFIG_CPU_SH7723) || defined(CONFIG_CPU_SH7724)
#elif defined(CONFIG_CPU_SH7723)
#define SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size,\
sh4_scif_offset, sh4_scif_size) \
CPU_SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size,\
@ -549,8 +541,7 @@ SCIx_FNS(SCxTDR, 0x20, 8, 0x40, 8)
SCIx_FNS(SCxRDR, 0x24, 8, 0x60, 8)
SCIF_FNS(SCLSR, 0x00, 0)
SCIF_FNS(DL, 0x00, 0) /* dummy */
#elif defined(CONFIG_CPU_SH7723) ||\
defined(CONFIG_CPU_SH7724)
#elif defined(CONFIG_CPU_SH7723)
SCIx_FNS(SCSMR, 0x00, 16, 0x00, 16)
SCIx_FNS(SCBRR, 0x04, 8, 0x04, 8)
SCIx_FNS(SCSCR, 0x08, 16, 0x08, 16)
@ -594,7 +585,6 @@ SCIx_FNS(SCxRDR, 0x0a, 8, 0x14, 8, 0x0A, 8, 0x14, 8, 0x05, 8)
SCIF_FNS(SCFCR, 0x0c, 8, 0x18, 16)
#if defined(CONFIG_CPU_SH7760) || \
defined(CONFIG_CPU_SH7780) || \
defined(CONFIG_CPU_SH7785) || \
defined(CONFIG_CPU_SH7786)
SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16)
SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16)
@ -734,7 +724,6 @@ static inline int sci_rxd_in(struct uart_port *port)
*/
#if (defined(CONFIG_CPU_SH7780) || \
defined(CONFIG_CPU_SH7785) || \
defined(CONFIG_CPU_SH7786)) && \
!defined(CONFIG_SH_SH2007)
#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1)
@ -747,8 +736,7 @@ static inline int sci_rxd_in(struct uart_port *port)
defined(CONFIG_SH73A0) || \
defined(CONFIG_R8A7740)
#define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1)
#elif defined(CONFIG_CPU_SH7723) ||\
defined(CONFIG_CPU_SH7724)
#elif defined(CONFIG_CPU_SH7723)
static inline int scbrr_calc(struct uart_port *port, int bps, int clk)
{
if (port->type == PORT_SCIF)

View file

@ -173,7 +173,7 @@ config PL022_SPI
config RENESAS_RPC_SPI
bool "Renesas RPC SPI driver"
depends on RCAR_GEN3
depends on RCAR_GEN3 || RZA1
imply SPI_FLASH_BAR
help
Enable the Renesas RPC SPI driver, used to access SPI NOR flash

View file

@ -409,27 +409,30 @@ static int rpc_spi_probe(struct udevice *dev)
priv->regs = plat->regs;
priv->extr = plat->extr;
#if CONFIG_IS_ENABLED(CLK)
clk_enable(&priv->clk);
#endif
return 0;
}
static int rpc_spi_ofdata_to_platdata(struct udevice *bus)
{
struct rpc_spi_platdata *plat = dev_get_platdata(bus);
struct rpc_spi_priv *priv = dev_get_priv(bus);
int ret;
plat->regs = dev_read_addr_index(bus, 0);
plat->extr = dev_read_addr_index(bus, 1);
#if CONFIG_IS_ENABLED(CLK)
struct rpc_spi_priv *priv = dev_get_priv(bus);
int ret;
ret = clk_get_by_index(bus, 0, &priv->clk);
if (ret < 0) {
printf("%s: Could not get clock for %s: %d\n",
__func__, bus->name, ret);
return ret;
}
#endif
plat->freq = dev_read_u32_default(bus, "spi-max-freq", 50000000);
@ -448,6 +451,7 @@ static const struct udevice_id rpc_spi_ids[] = {
{ .compatible = "renesas,rpc-r8a77965" },
{ .compatible = "renesas,rpc-r8a77970" },
{ .compatible = "renesas,rpc-r8a77995" },
{ .compatible = "renesas,rpc-r7s72100" },
{ }
};

View file

@ -110,6 +110,13 @@ config MPC83XX_TIMER
Select this to enable support for the timer found on
devices based on the MPC83xx family of SoCs.
config RENESAS_OSTM_TIMER
bool "Renesas RZ/A1 R7S72100 OSTM Timer"
depends on TIMER
help
Enables support for the Renesas OSTM Timer driver.
This timer is present on Renesas RZ/A1 R7S72100 SoCs.
config X86_TSC_TIMER_EARLY_FREQ
int "x86 TSC timer frequency in MHz when used as the early timer"
depends on X86_TSC_TIMER

View file

@ -13,6 +13,7 @@ obj-$(CONFIG_CADENCE_TTC_TIMER) += cadence-ttc.o
obj-$(CONFIG_DESIGNWARE_APB_TIMER) += dw-apb-timer.o
obj-$(CONFIG_MPC83XX_TIMER) += mpc83xx_timer.o
obj-$(CONFIG_OMAP_TIMER) += omap-timer.o
obj-$(CONFIG_RENESAS_OSTM_TIMER) += ostm_timer.o
obj-$(CONFIG_RISCV_TIMER) += riscv_timer.o
obj-$(CONFIG_ROCKCHIP_TIMER) += rockchip_timer.o
obj-$(CONFIG_SANDBOX_TIMER) += sandbox_timer.o

View file

@ -0,0 +1,92 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Renesas RZ/A1 R7S72100 OSTM Timer driver
*
* Copyright (C) 2019 Marek Vasut <marek.vasut@gmail.com>
*/
#include <common.h>
#include <asm/io.h>
#include <dm.h>
#include <clk.h>
#include <timer.h>
#define OSTM_CMP 0x00
#define OSTM_CNT 0x04
#define OSTM_TE 0x10
#define OSTM_TS 0x14
#define OSTM_TT 0x18
#define OSTM_CTL 0x20
#define OSTM_CTL_D BIT(1)
DECLARE_GLOBAL_DATA_PTR;
struct ostm_priv {
fdt_addr_t regs;
};
static int ostm_get_count(struct udevice *dev, u64 *count)
{
struct ostm_priv *priv = dev_get_priv(dev);
*count = timer_conv_64(readl(priv->regs + OSTM_CNT));
return 0;
}
static int ostm_probe(struct udevice *dev)
{
struct timer_dev_priv *uc_priv = dev_get_uclass_priv(dev);
struct ostm_priv *priv = dev_get_priv(dev);
#if CONFIG_IS_ENABLED(CLK)
struct clk clk;
int ret;
ret = clk_get_by_index(dev, 0, &clk);
if (ret)
return ret;
uc_priv->clock_rate = clk_get_rate(&clk);
clk_free(&clk);
#else
uc_priv->clock_rate = CONFIG_SYS_CLK_FREQ / 2;
#endif
readb(priv->regs + OSTM_CTL);
writeb(OSTM_CTL_D, priv->regs + OSTM_CTL);
setbits_8(priv->regs + OSTM_TT, BIT(0));
writel(0xffffffff, priv->regs + OSTM_CMP);
setbits_8(priv->regs + OSTM_TS, BIT(0));
return 0;
}
static int ostm_ofdata_to_platdata(struct udevice *dev)
{
struct ostm_priv *priv = dev_get_priv(dev);
priv->regs = dev_read_addr(dev);
return 0;
}
static const struct timer_ops ostm_ops = {
.get_count = ostm_get_count,
};
static const struct udevice_id ostm_ids[] = {
{ .compatible = "renesas,ostm" },
{}
};
U_BOOT_DRIVER(ostm_timer) = {
.name = "ostm-timer",
.id = UCLASS_TIMER,
.ops = &ostm_ops,
.probe = ostm_probe,
.of_match = ostm_ids,
.ofdata_to_platdata = ostm_ofdata_to_platdata,
.priv_auto_alloc_size = sizeof(struct ostm_priv),
};

View file

@ -1,133 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Configuation settings for the Renesas Solutions ECOVEC board
*
* Copyright (C) 2009 - 2011 Renesas Solutions Corp.
* Copyright (C) 2009 Kuninori Morimoto <morimoto.kuninori@renesas.com>
* Copyright (C) 2010, 2011 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
*/
#ifndef __ECOVEC_H
#define __ECOVEC_H
/*
* Address Interface BusWidth
*-----------------------------------------
* 0x0000_0000 U-Boot 16bit
* 0x0004_0000 Linux romImage 16bit
* 0x0014_0000 MTD for Linux 16bit
* 0x0400_0000 Internal I/O 16/32bit
* 0x0800_0000 DRAM 32bit
* 0x1800_0000 MFI 16bit
*/
#define CONFIG_CPU_SH7724 1
#define CONFIG_ECOVEC_ROMIMAGE_ADDR 0xA0040000
#define CONFIG_DISPLAY_BOARDINFO
#undef CONFIG_SHOW_BOOT_PROGRESS
/* I2C */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_SH
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS 2
#define CONFIG_SYS_I2C_SH_BASE0 0xA4470000
#define CONFIG_SYS_I2C_SH_SPEED0 100000
#define CONFIG_SYS_I2C_SH_BASE1 0xA4750000
#define CONFIG_SYS_I2C_SH_SPEED1 100000
#define CONFIG_SH_I2C_DATA_HIGH 4
#define CONFIG_SH_I2C_DATA_LOW 5
#define CONFIG_SH_I2C_CLOCK 41666666
/* Ether */
#define CONFIG_SH_ETHER_USE_PORT (0)
#define CONFIG_SH_ETHER_PHY_ADDR (0x1f)
#define CONFIG_PHY_SMSC 1
#define CONFIG_BITBANGMII
#define CONFIG_BITBANGMII_MULTI
#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_MII
/* USB / R8A66597 */
#define CONFIG_USB_R8A66597_HCD
#define CONFIG_R8A66597_BASE_ADDR 0xA4D80000
#define CONFIG_R8A66597_XTAL 0x0000 /* 12MHz */
#define CONFIG_R8A66597_LDRV 0x8000 /* 3.3V */
#define CONFIG_R8A66597_ENDIAN 0x0000 /* little */
#define CONFIG_SUPERH_ON_CHIP_R8A66597
/* undef to save memory */
/* Monitor Command Prompt */
/* Buffer size for Console output */
#define CONFIG_SYS_PBSIZE 256
/* List of legal baudrate settings for this board */
#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
/* SCIF */
#define CONFIG_SCIF 1
#define CONFIG_CONS_SCIF0 1
/* Suppress display of console information at boot */
/* SDRAM */
#define CONFIG_SYS_SDRAM_BASE (0x88000000)
#define CONFIG_SYS_SDRAM_SIZE (256 * 1024 * 1024)
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 * 1024)
#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE)
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 200 * 1024 * 1024)
/* Enable alternate, more extensive, memory test */
/* Scratch address used by the alternate memory test */
#undef CONFIG_SYS_MEMTEST_SCRATCH
/* Enable temporary baudrate change while serial download */
#undef CONFIG_SYS_LOADS_BAUD_CHANGE
/* FLASH */
#undef CONFIG_SYS_FLASH_QUIET_TEST
#define CONFIG_SYS_FLASH_EMPTY_INFO
#define CONFIG_SYS_FLASH_BASE (0xA0000000)
#define CONFIG_SYS_MAX_FLASH_SECT 512
/* if you use all NOR Flash , you change dip-switch. Please see Manual. */
#define CONFIG_SYS_MAX_FLASH_BANKS 1
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
/* Timeout for Flash erase operations (in ms) */
#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * 1000)
/* Timeout for Flash write operations (in ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * 1000)
/* Timeout for Flash set sector lock bit operations (in ms) */
#define CONFIG_SYS_FLASH_LOCK_TOUT (3 * 1000)
/* Timeout for Flash clear lock bit operations (in ms) */
#define CONFIG_SYS_FLASH_UNLOCK_TOUT (3 * 1000)
/*
* Use hardware flash sectors protection instead
* of U-Boot software protection
*/
#undef CONFIG_SYS_DIRECT_FLASH_TFTP
/* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */
#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE)
/* Monitor size */
#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
/* Size of DRAM reserved for malloc() use */
#define CONFIG_SYS_MALLOC_LEN (256 * 1024)
#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
/* ENV setting */
#define CONFIG_ENV_OVERWRITE 1
#define CONFIG_ENV_SECT_SIZE (128 * 1024)
#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
/* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */
#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE)
/* Board Clock */
#define CONFIG_SYS_CLK_FREQ 41666666
#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
#endif /* __ECOVEC_H */

53
include/configs/grpeach.h Normal file
View file

@ -0,0 +1,53 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Configuration settings for the Renesas GRPEACH board
*
* Copyright (C) 2017-2019 Renesas Electronics
*/
#ifndef __GRPEACH_H
#define __GRPEACH_H
/* Board Clock , P1 clock frequency (XTAL=13.33MHz) */
#define CONFIG_SYS_CLK_FREQ 66666666
/* Serial Console */
#define CONFIG_BAUDRATE 115200
/* Miscellaneous */
#define CONFIG_SYS_PBSIZE 256
#define CONFIG_SYS_ARM_CACHE_WRITETHROUGH
#define CONFIG_CMDLINE_TAG
#define CONFIG_ARCH_CPU_INIT
/* Internal RAM Size (RZ/A1=3M, RZ/A1M=5M, RZ/A1H=10M) */
#define CONFIG_SYS_SDRAM_BASE 0x20000000
#define CONFIG_SYS_SDRAM_SIZE (10 * 1024 * 1024)
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE - 1024 * 1024)
#define CONFIG_SYS_LOAD_ADDR \
(CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024)
#define CONFIG_ENV_OVERWRITE 1
#define CONFIG_ENV_SECT_SIZE (64 * 1024)
#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_OFFSET 0xc0000
/* Malloc */
#define CONFIG_SYS_MALLOC_LEN (1024 * 1024)
#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
/* Kernel Boot */
#define CONFIG_BOOTARGS "ignore_loglevel"
/* Network interface */
#define CONFIG_SH_ETHER_USE_PORT 0
#define CONFIG_SH_ETHER_PHY_ADDR 0
#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_MII
#define CONFIG_SH_ETHER_CACHE_WRITEBACK
#define CONFIG_SH_ETHER_CACHE_INVALIDATE
#define CONFIG_SH_ETHER_ALIGNE_SIZE 64
#define CONFIG_BITBANGMII
#define CONFIG_BITBANGMII_MULTI
#endif /* __GRPEACH_H */

View file

@ -1,128 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Configuation settings for the Renesas Technology R0P7785LC0011RL board
*
* Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
*/
#ifndef __SH7785LCR_H
#define __SH7785LCR_H
#define CONFIG_CPU_SH7785 1
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootdevice=0:1\0" \
"usbload=usb reset;usbboot;usb stop;bootm\0"
#define CONFIG_DISPLAY_BOARDINFO
#undef CONFIG_SHOW_BOOT_PROGRESS
/* MEMORY */
#if defined(CONFIG_SH_32BIT)
/* 0x40000000 - 0x47FFFFFF does not use */
#define CONFIG_SH_SDRAM_OFFSET (0x8000000)
#define SH7785LCR_SDRAM_PHYS_BASE (0x40000000 + CONFIG_SH_SDRAM_OFFSET)
#define SH7785LCR_SDRAM_BASE (0x80000000 + CONFIG_SH_SDRAM_OFFSET)
#define SH7785LCR_SDRAM_SIZE (384 * 1024 * 1024)
#define SH7785LCR_FLASH_BASE_1 (0xa0000000)
#define SH7785LCR_FLASH_BANK_SIZE (64 * 1024 * 1024)
#define SH7785LCR_USB_BASE (0xa6000000)
#else
#define SH7785LCR_SDRAM_BASE (0x08000000)
#define SH7785LCR_SDRAM_SIZE (128 * 1024 * 1024)
#define SH7785LCR_FLASH_BASE_1 (0xa0000000)
#define SH7785LCR_FLASH_BANK_SIZE (64 * 1024 * 1024)
#define SH7785LCR_USB_BASE (0xb4000000)
#endif
#define CONFIG_SYS_PBSIZE 256
#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
/* SCIF */
#define CONFIG_CONS_SCIF1 1
#define CONFIG_SCIF_EXT_CLOCK 1
#define CONFIG_SYS_MEMTEST_START (SH7785LCR_SDRAM_BASE)
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
(SH7785LCR_SDRAM_SIZE) - \
4 * 1024 * 1024)
#undef CONFIG_SYS_MEMTEST_SCRATCH
#undef CONFIG_SYS_LOADS_BAUD_CHANGE
#define CONFIG_SYS_SDRAM_BASE (SH7785LCR_SDRAM_BASE)
#define CONFIG_SYS_SDRAM_SIZE (SH7785LCR_SDRAM_SIZE)
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 * 1024)
#define CONFIG_SYS_MONITOR_BASE (SH7785LCR_FLASH_BASE_1)
#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
#define CONFIG_SYS_MALLOC_LEN (512 * 1024)
#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
/* FLASH */
#undef CONFIG_SYS_FLASH_QUIET_TEST
#define CONFIG_SYS_FLASH_EMPTY_INFO
#define CONFIG_SYS_FLASH_BASE (SH7785LCR_FLASH_BASE_1)
#define CONFIG_SYS_MAX_FLASH_SECT 512
#define CONFIG_SYS_MAX_FLASH_BANKS 1
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE + \
(0 * SH7785LCR_FLASH_BANK_SIZE) }
#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * 1000)
#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * 1000)
#define CONFIG_SYS_FLASH_LOCK_TOUT (3 * 1000)
#define CONFIG_SYS_FLASH_UNLOCK_TOUT (3 * 1000)
#undef CONFIG_SYS_DIRECT_FLASH_TFTP
/* R8A66597 */
#define CONFIG_USB_R8A66597_HCD
#define CONFIG_R8A66597_BASE_ADDR SH7785LCR_USB_BASE
#define CONFIG_R8A66597_XTAL 0x0000 /* 12MHz */
#define CONFIG_R8A66597_LDRV 0x8000 /* 3.3V */
#define CONFIG_R8A66597_ENDIAN 0x0000 /* little */
/* PCI Controller */
#define CONFIG_SH4_PCI
#define CONFIG_SH7780_PCI
#if defined(CONFIG_SH_32BIT)
#define CONFIG_SH7780_PCI_LSR 0x1ff00001
#define CONFIG_SH7780_PCI_LAR 0x5f000000
#define CONFIG_SH7780_PCI_BAR 0x5f000000
#else
#define CONFIG_SH7780_PCI_LSR 0x07f00001
#define CONFIG_SH7780_PCI_LAR CONFIG_SYS_SDRAM_SIZE
#define CONFIG_SH7780_PCI_BAR CONFIG_SYS_SDRAM_SIZE
#endif
#define CONFIG_PCI_SCAN_SHOW 1
#define CONFIG_PCI_MEM_BUS 0xFD000000 /* Memory space base addr */
#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
#define CONFIG_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */
#define CONFIG_PCI_IO_BUS 0xFE200000 /* IO space base address */
#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
#define CONFIG_PCI_IO_SIZE 0x00200000 /* Size of IO window */
#if defined(CONFIG_SH_32BIT)
#define CONFIG_PCI_SYS_PHYS SH7785LCR_SDRAM_PHYS_BASE
#else
#define CONFIG_PCI_SYS_PHYS CONFIG_SYS_SDRAM_BASE
#endif
#define CONFIG_PCI_SYS_BUS CONFIG_SYS_SDRAM_BASE
#define CONFIG_PCI_SYS_SIZE CONFIG_SYS_SDRAM_SIZE
/* ENV setting */
#define CONFIG_ENV_OVERWRITE 1
#define CONFIG_ENV_SECT_SIZE (256 * 1024)
#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE)
/* Board Clock */
/* The SCIF used external clock. system clock only used timer. */
#define CONFIG_SYS_CLK_FREQ 50000000
#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
#endif /* __SH7785LCR_H */

View file

@ -0,0 +1,112 @@
/* SPDX-License-Identifier: GPL-2.0
*
* Copyright (C) 2014 Renesas Solutions Corp.
* Copyright (C) 2014 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com>
*/
#ifndef __DT_BINDINGS_CLOCK_R7S72100_H__
#define __DT_BINDINGS_CLOCK_R7S72100_H__
#define R7S72100_CLK_PLL 0
#define R7S72100_CLK_I 1
#define R7S72100_CLK_G 2
/* MSTP2 */
#define R7S72100_CLK_CORESIGHT 0
/* MSTP3 */
#define R7S72100_CLK_IEBUS 7
#define R7S72100_CLK_IRDA 6
#define R7S72100_CLK_LIN0 5
#define R7S72100_CLK_LIN1 4
#define R7S72100_CLK_MTU2 3
#define R7S72100_CLK_CAN 2
#define R7S72100_CLK_ADCPWR 1
#define R7S72100_CLK_PWM 0
/* MSTP4 */
#define R7S72100_CLK_SCIF0 7
#define R7S72100_CLK_SCIF1 6
#define R7S72100_CLK_SCIF2 5
#define R7S72100_CLK_SCIF3 4
#define R7S72100_CLK_SCIF4 3
#define R7S72100_CLK_SCIF5 2
#define R7S72100_CLK_SCIF6 1
#define R7S72100_CLK_SCIF7 0
/* MSTP5 */
#define R7S72100_CLK_SCI0 7
#define R7S72100_CLK_SCI1 6
#define R7S72100_CLK_SG0 5
#define R7S72100_CLK_SG1 4
#define R7S72100_CLK_SG2 3
#define R7S72100_CLK_SG3 2
#define R7S72100_CLK_OSTM0 1
#define R7S72100_CLK_OSTM1 0
/* MSTP6 */
#define R7S72100_CLK_ADC 7
#define R7S72100_CLK_CEU 6
#define R7S72100_CLK_DOC0 5
#define R7S72100_CLK_DOC1 4
#define R7S72100_CLK_DRC0 3
#define R7S72100_CLK_DRC1 2
#define R7S72100_CLK_JCU 1
#define R7S72100_CLK_RTC 0
/* MSTP7 */
#define R7S72100_CLK_VDEC0 7
#define R7S72100_CLK_VDEC1 6
#define R7S72100_CLK_ETHER 4
#define R7S72100_CLK_NAND 3
#define R7S72100_CLK_USB0 1
#define R7S72100_CLK_USB1 0
/* MSTP8 */
#define R7S72100_CLK_IMR0 7
#define R7S72100_CLK_IMR1 6
#define R7S72100_CLK_IMRDISP 5
#define R7S72100_CLK_MMCIF 4
#define R7S72100_CLK_MLB 3
#define R7S72100_CLK_ETHAVB 2
#define R7S72100_CLK_SCUX 1
/* MSTP9 */
#define R7S72100_CLK_I2C0 7
#define R7S72100_CLK_I2C1 6
#define R7S72100_CLK_I2C2 5
#define R7S72100_CLK_I2C3 4
#define R7S72100_CLK_SPIBSC0 3
#define R7S72100_CLK_SPIBSC1 2
#define R7S72100_CLK_VDC50 1 /* and LVDS */
#define R7S72100_CLK_VDC51 0
/* MSTP10 */
#define R7S72100_CLK_SPI0 7
#define R7S72100_CLK_SPI1 6
#define R7S72100_CLK_SPI2 5
#define R7S72100_CLK_SPI3 4
#define R7S72100_CLK_SPI4 3
#define R7S72100_CLK_CDROM 2
#define R7S72100_CLK_SPDIF 1
#define R7S72100_CLK_RGPVG2 0
/* MSTP11 */
#define R7S72100_CLK_SSI0 5
#define R7S72100_CLK_SSI1 4
#define R7S72100_CLK_SSI2 3
#define R7S72100_CLK_SSI3 2
#define R7S72100_CLK_SSI4 1
#define R7S72100_CLK_SSI5 0
/* MSTP12 */
#define R7S72100_CLK_SDHI00 3
#define R7S72100_CLK_SDHI01 2
#define R7S72100_CLK_SDHI10 1
#define R7S72100_CLK_SDHI11 0
/* MSTP13 */
#define R7S72100_CLK_PIX1 2
#define R7S72100_CLK_PIX0 1
#endif /* __DT_BINDINGS_CLOCK_R7S72100_H__ */

View file

@ -0,0 +1,18 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Defines macros and constants for Renesas RZ/A1 pin controller pin
* muxing functions.
*/
#ifndef __DT_BINDINGS_PINCTRL_RENESAS_RZA1_H
#define __DT_BINDINGS_PINCTRL_RENESAS_RZA1_H
#define RZA1_PINS_PER_PORT 16
/*
* Create the pin index from its bank and position numbers and store in
* the upper 16 bits the alternate function identifier
*/
#define RZA1_PINMUX(b, p, f) \
((b) * RZA1_PINS_PER_PORT + (p) | ((f) << 16))
#endif /* __DT_BINDINGS_PINCTRL_RENESAS_RZA1_H */

View file

@ -277,7 +277,6 @@ CONFIG_CPU_SH7706
CONFIG_CPU_SH7720
CONFIG_CPU_SH7722
CONFIG_CPU_SH7723
CONFIG_CPU_SH7724
CONFIG_CPU_SH7734
CONFIG_CPU_SH7750
CONFIG_CPU_SH7751
@ -286,7 +285,6 @@ CONFIG_CPU_SH7753
CONFIG_CPU_SH7757
CONFIG_CPU_SH7763
CONFIG_CPU_SH7780
CONFIG_CPU_SH7785
CONFIG_CPU_TYPE_R
CONFIG_CPU_VR41XX
CONFIG_CQSPI_REF_CLK
@ -434,7 +432,6 @@ CONFIG_ECC_MODE_SHIFT
CONFIG_ECC_SRAM_ADDR_MASK
CONFIG_ECC_SRAM_ADDR_SHIFT
CONFIG_ECC_SRAM_REQ_BIT
CONFIG_ECOVEC_ROMIMAGE_ADDR
CONFIG_EDB9301
CONFIG_EDB9302
CONFIG_EDB9302A