Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-10 15:14:43 +00:00
Code Issues Projects Releases Packages Wiki Activity

net: vsc9953: Remove this driver

Browse source 
No platforms enable this driver as there's no T1040D4RDB nor T1040RDB
support at this time.  Remove.

Signed-off-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Tom Rini 2022-12-02 16:42:48 -05:00
parent 4fd9373bbb
commit 8747decc9b
4 changed files with 0 additions and 2804 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

46
board/freescale/t104xrdb/eth.c
View file

@ -22,10 +22,6 @@ int board_eth_init(struct bd_info *bis)
struct memac_mdio_info memac_mdio_info;
unsigned int i;
int phy_addr = 0;
#ifdef CONFIG_VSC9953
phy_interface_t phy_int;
struct mii_dev *bus;
#endif
printf("Initializing Fman\n");
@ -107,48 +103,6 @@ int board_eth_init(struct bd_info *bis)
DEFAULT_FM_MDIO_NAME));
}
#ifdef CONFIG_VSC9953
/* SerDes configured for QSGMII */
if (serdes_get_first_lane(FSL_SRDS_1, QSGMII_SW1_A) >= 0) {
for (i = 0; i < 4; i++) {
bus = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME);
phy_addr = CFG_SYS_FM1_QSGMII11_PHY_ADDR + i;
phy_int = PHY_INTERFACE_MODE_QSGMII;
vsc9953_port_info_set_mdio(i, bus);
vsc9953_port_info_set_phy_address(i, phy_addr);
vsc9953_port_info_set_phy_int(i, phy_int);
vsc9953_port_enable(i);
}
}
if (serdes_get_first_lane(FSL_SRDS_1, QSGMII_SW1_B) >= 0) {
for (i = 4; i < 8; i++) {
bus = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME);
phy_addr = CFG_SYS_FM1_QSGMII21_PHY_ADDR + i - 4;
phy_int = PHY_INTERFACE_MODE_QSGMII;
vsc9953_port_info_set_mdio(i, bus);
vsc9953_port_info_set_phy_address(i, phy_addr);
vsc9953_port_info_set_phy_int(i, phy_int);
vsc9953_port_enable(i);
}
}
/* Connect DTSEC1 to L2 switch if it doesn't have a PHY */
if (serdes_get_first_lane(FSL_SRDS_1, SGMII_FM1_DTSEC1) < 0)
vsc9953_port_enable(8);
/* Connect DTSEC2 to L2 switch if it doesn't have a PHY */
if (serdes_get_first_lane(FSL_SRDS_1, SGMII_FM1_DTSEC2) < 0) {
/* Enable L2 On MAC2 using SCFG */
struct ccsr_scfg *scfg = (struct ccsr_scfg *)
CFG_SYS_MPC85xx_SCFG;
out_be32(&scfg->esgmiiselcr, in_be32(&scfg->esgmiiselcr) |
(0x80000000));
vsc9953_port_enable(9);
}
#endif
cpu_eth_init(bis);
#endif

3
drivers/net/Kconfig
View file

@ -709,9 +709,6 @@ config XILINX_AXIMRMAC
config VSC7385_ENET
bool "Vitesse 7385 Switch Firmware Upload driver"
config VSC9953
bool "Vitesse VSC9953 L2 Switch driver"
config XILINX_EMACLITE
select PHYLIB
select MII

1
drivers/net/Makefile
View file

@ -87,7 +87,6 @@ obj-$(CONFIG_SUN8I_EMAC) += sun8i_emac.o
obj-$(CONFIG_TSEC_ENET) += tsec.o fsl_mdio.o
obj-$(CONFIG_TULIP) += dc2114x.o
obj-$(CONFIG_VSC7385_ENET) += vsc7385.o
obj-$(CONFIG_VSC9953) += vsc9953.o
obj-$(CONFIG_XILINX_AXIEMAC) += xilinx_axi_emac.o
obj-$(CONFIG_XILINX_AXIMRMAC) += xilinx_axi_mrmac.o
obj-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o

2754
drivers/net/vsc9953.c
View file

File diff suppressed because it is too large Load diff