net: Add support for Marvell 88E1510 PHY

Support the 88E1510 PHY which is very similar to the 88E1518.
I also set the INTn output and configured the LEDs.

Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Hao Zhang <hzhang@ti.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
This commit is contained in:
Clemens Gruber 2015-06-06 14:44:58 +02:00 committed by Joe Hershberger
parent 90a94ef652
commit 8396d0ab8b

View file

@ -336,6 +336,25 @@ static int m88e1518_config(struct phy_device *phydev)
return m88e1111s_config(phydev);
}
/* Marvell 88E1510 */
static int m88e1510_config(struct phy_device *phydev)
{
/* Select page 3 */
phy_write(phydev, MDIO_DEVAD_NONE, 22, 3);
/* Enable INTn output on LED[2] */
m88e1518_phy_writebits(phydev, 18, 7, 1, 1);
/* Configure LEDs */
m88e1518_phy_writebits(phydev, 16, 0, 4, 3); /* LED[0]:0011 (ACT) */
m88e1518_phy_writebits(phydev, 16, 4, 4, 6); /* LED[1]:0110 (LINK) */
/* Reset page selection */
phy_write(phydev, MDIO_DEVAD_NONE, 22, 0);
return m88e1518_config(phydev);
}
/* Marvell 88E1118 */
static int m88e1118_config(struct phy_device *phydev)
{
@ -548,6 +567,16 @@ static struct phy_driver M88E1149S_driver = {
.shutdown = &genphy_shutdown,
};
static struct phy_driver M88E1510_driver = {
.name = "Marvell 88E1510",
.uid = 0x1410dd0,
.mask = 0xffffff0,
.features = PHY_GBIT_FEATURES,
.config = &m88e1510_config,
.startup = &m88e1011s_startup,
.shutdown = &genphy_shutdown,
};
static struct phy_driver M88E1518_driver = {
.name = "Marvell 88E1518",
.uid = 0x1410dd1,
@ -578,6 +607,7 @@ int phy_marvell_init(void)
phy_register(&M88E1118R_driver);
phy_register(&M88E1111S_driver);
phy_register(&M88E1011S_driver);
phy_register(&M88E1510_driver);
phy_register(&M88E1518_driver);
return 0;