Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-24 13:43:28 +00:00
Code Issues Projects Releases Packages Wiki Activity

driver: ddr: Refine the ddr init driver on imx8m

Browse source 
Refine the ddr init driver to make it more reusable for different
DDR type(LPDDR4, DDR4 & DDR3L). So we can reduce some redundant
code.

Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
This commit is contained in:
Jacky Bai 2019-08-08 09:59:08 +00:00 committed by Stefano Babic
parent 7b14cc991b
commit 825ab6b406
7 changed files with 184 additions and 311 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

6
drivers/ddr/imx/imx8m/Kconfig
View file

@ -16,6 +16,12 @@ config IMX8M_DDR4
help
Select the i.MX8M DDR4 driver support on i.MX8M SOC.
config IMX8M_DDR3L
bool "imx8m ddr3l"
select IMX8M_DRAM
help
Select the i.MX8M DDR3L driver support on i.MX8M SOC.
config SAVED_DRAM_TIMING_BASE
hex "Define the base address for saved dram timing"
help

4
drivers/ddr/imx/imx8m/Makefile
View file

@ -5,7 +5,5 @@
#
ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_IMX8M_DRAM) += helper.o ddrphy_utils.o ddrphy_train.o ddrphy_csr.o
obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_init.o
obj-$(CONFIG_IMX8M_DDR4) += ddr4_init.o
obj-$(CONFIG_IMX8M_DRAM) += helper.o ddrphy_utils.o ddrphy_train.o ddrphy_csr.o ddr_init.o
endif

112
drivers/ddr/imx/imx8m/ddr4_init.c
View file

@ -1,112 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2018 NXP
*/
#include <common.h>
#include <errno.h>
#include <asm/io.h>
#include <asm/arch/ddr.h>
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
void ddr4_cfg_umctl2(struct dram_cfg_param *ddrc_cfg, int num)
{
int i = 0;
for (i = 0; i < num; i++) {
reg32_write(ddrc_cfg->reg, ddrc_cfg->val);
ddrc_cfg++;
}
}
void ddr_init(struct dram_timing_info *dram_timing)
{
volatile unsigned int tmp_t;
/*
* assert [0]ddr1_preset_n, [1]ddr1_core_reset_n,
* [2]ddr1_phy_reset, [3]ddr1_phy_pwrokin_n,
* [4]src_system_rst_b!
*/
reg32_write(SRC_DDRC_RCR_ADDR, 0x8F00003F);
/* deassert [4]src_system_rst_b! */
reg32_write(SRC_DDRC_RCR_ADDR, 0x8F00000F);
/*
* change the clock source of dram_apb_clk_root
* to source 4 --800MHz/4
*/
clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON |
CLK_ROOT_SOURCE_SEL(4) |
CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV4));
dram_pll_init(MHZ(600));
reg32_write(0x303A00EC, 0x0000ffff); /* PGC_CPU_MAPPING */
reg32setbit(0x303A00F8, 5); /* PU_PGC_SW_PUP_REQ */
/* release [0]ddr1_preset_n, [3]ddr1_phy_pwrokin_n */
reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000006);
reg32_write(DDRC_DBG1(0), 0x00000001);
reg32_write(DDRC_PWRCTL(0), 0x00000001);
while (0 != (0x7 & reg32_read(DDRC_STAT(0))))
;
/* config the uMCTL2's registers */
ddr4_cfg_umctl2(dram_timing->ddrc_cfg, dram_timing->ddrc_cfg_num);
reg32_write(DDRC_RFSHCTL3(0), 0x00000001);
/* RESET: <ctn> DEASSERTED */
/* RESET: <a Port 0 DEASSERTED(0) */
reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000004);
reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000000);
reg32_write(DDRC_DBG1(0), 0x00000000);
reg32_write(DDRC_PWRCTL(0), 0x00000aa);
reg32_write(DDRC_SWCTL(0), 0x00000000);
reg32_write(DDRC_DFIMISC(0), 0x00000000);
/* config the DDR PHY's registers */
ddr_cfg_phy(dram_timing);
do {
tmp_t = reg32_read(IP2APB_DDRPHY_IPS_BASE_ADDR(0) +
4 * 0x00020097);
} while (tmp_t != 0);
reg32_write(DDRC_DFIMISC(0), 0x00000020);
/* wait DFISTAT.dfi_init_complete to 1 */
while (0 == (0x1 & reg32_read(DDRC_DFISTAT(0))))
;
/* clear DFIMISC.dfi_init_complete_en */
reg32_write(DDRC_DFIMISC(0), 0x00000000);
/* set DFIMISC.dfi_init_complete_en again */
reg32_write(DDRC_DFIMISC(0), 0x00000001);
reg32_write(DDRC_PWRCTL(0), 0x0000088);
/*
* set SWCTL.sw_done to enable quasi-dynamic register
* programming outside reset.
*/
reg32_write(DDRC_SWCTL(0), 0x00000001);
/* wait SWSTAT.sw_done_ack to 1 */
while (0 == (0x1 & reg32_read(DDRC_SWSTAT(0))))
;
/* wait STAT to normal state */
while (0x1 != (0x7 & reg32_read(DDRC_STAT(0))))
;
reg32_write(DDRC_PWRCTL(0), 0x0000088);
reg32_write(DDRC_PCTRL_0(0), 0x00000001);
/* dis_auto-refresh is set to 0 */
reg32_write(DDRC_RFSHCTL3(0), 0x00000000);
/* save the dram timing config into memory */
dram_config_save(dram_timing, CONFIG_SAVED_DRAM_TIMING_BASE);
}

168
drivers/ddr/imx/imx8m/ddr_init.c Normal file
View file

@ -0,0 +1,168 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2018-2019 NXP
*/
#include <common.h>
#include <errno.h>
#include <asm/io.h>
#include <asm/arch/ddr.h>
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
void ddr_cfg_umctl2(struct dram_cfg_param *ddrc_cfg, int num)
{
int i = 0;
for (i = 0; i < num; i++) {
reg32_write(ddrc_cfg->reg, ddrc_cfg->val);
ddrc_cfg++;
}
}
void ddr_init(struct dram_timing_info *dram_timing)
{
unsigned int tmp, initial_drate, target_freq;
printf("DDRINFO: start DRAM init\n");
/* Step1: Follow the power up procedure */
if (is_imx8mq()) {
reg32_write(SRC_DDRC_RCR_ADDR + 0x04, 0x8F00000F);
reg32_write(SRC_DDRC_RCR_ADDR, 0x8F00000F);
reg32_write(SRC_DDRC_RCR_ADDR + 0x04, 0x8F000000);
} else {
reg32_write(SRC_DDRC_RCR_ADDR, 0x8F00001F);
reg32_write(SRC_DDRC_RCR_ADDR, 0x8F00000F);
}
debug("DDRINFO: cfg clk\n");
/* change the clock source of dram_apb_clk_root: source 4 800MHz /4 = 200MHz */
clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON | CLK_ROOT_SOURCE_SEL(4) |
CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV4));
initial_drate = dram_timing->fsp_msg[0].drate;
/* default to the frequency point 0 clock */
ddrphy_init_set_dfi_clk(initial_drate);
/* disable iso */
reg32_write(0x303A00EC, 0x0000ffff); /* PGC_CPU_MAPPING */
reg32setbit(0x303A00F8, 5); /* PU_PGC_SW_PUP_REQ */
/* D-aasert the presetn */
reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000006);
/* Step2: Program the dwc_ddr_umctl2 registers */
debug("DDRINFO: ddrc config start\n");
ddr_cfg_umctl2(dram_timing->ddrc_cfg, dram_timing->ddrc_cfg_num);
debug("DDRINFO: ddrc config done\n");
/* Step3: De-assert reset signal(core_ddrc_rstn & aresetn_n) */
reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000004);
reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000000);
/*
* Step4: Disable auto-refreshes, self-refresh, powerdown, and
* assertion of dfi_dram_clk_disable by setting RFSHCTL3.dis_auto_refresh = 1,
* PWRCTL.powerdown_en = 0, and PWRCTL.selfref_en = 0, PWRCTL.en_dfi_dram_clk_disable = 0
*/
reg32_write(DDRC_DBG1(0), 0x00000000);
reg32_write(DDRC_RFSHCTL3(0), 0x0000001);
reg32_write(DDRC_PWRCTL(0), 0xa0);
/* if ddr type is LPDDR4, do it */
tmp = reg32_read(DDRC_MSTR(0));
if (tmp & (0x1 << 5))
reg32_write(DDRC_DDR_SS_GPR0, 0x01); /* LPDDR4 mode */
/* determine the initial boot frequency */
target_freq = reg32_read(DDRC_MSTR2(0)) & 0x3;
target_freq = (tmp & (0x1 << 29)) ? target_freq : 0x0;
/* Step5: Set SWCT.sw_done to 0 */
reg32_write(DDRC_SWCTL(0), 0x00000000);
/* Set the default boot frequency point */
clrsetbits_le32(DDRC_DFIMISC(0), (0x1f << 8), target_freq << 8);
/* Step6: Set DFIMISC.dfi_init_complete_en to 0 */
clrbits_le32(DDRC_DFIMISC(0), 0x1);
/* Step7: Set SWCTL.sw_done to 1; need to polling SWSTAT.sw_done_ack */
reg32_write(DDRC_SWCTL(0), 0x00000001);
do {
tmp = reg32_read(DDRC_SWSTAT(0));
} while ((tmp & 0x1) == 0x0);
/*
* Step8 ~ Step13: Start PHY initialization and training by
* accessing relevant PUB registers
*/
debug("DDRINFO:ddrphy config start\n");
ddr_cfg_phy(dram_timing);
debug("DDRINFO: ddrphy config done\n");
/*
* step14 CalBusy.0 =1, indicates the calibrator is actively
* calibrating. Wait Calibrating done.
*/
do {
tmp = reg32_read(DDRPHY_CalBusy(0));
} while ((tmp & 0x1));
printf("DDRINFO:ddrphy calibration done\n");
/* Step15: Set SWCTL.sw_done to 0 */
reg32_write(DDRC_SWCTL(0), 0x00000000);
/* Step16: Set DFIMISC.dfi_init_start to 1 */
setbits_le32(DDRC_DFIMISC(0), (0x1 << 5));
/* Step17: Set SWCTL.sw_done to 1; need to polling SWSTAT.sw_done_ack */
reg32_write(DDRC_SWCTL(0), 0x00000001);
do {
tmp = reg32_read(DDRC_SWSTAT(0));
} while ((tmp & 0x1) == 0x0);
/* Step18: Polling DFISTAT.dfi_init_complete = 1 */
do {
tmp = reg32_read(DDRC_DFISTAT(0));
} while ((tmp & 0x1) == 0x0);
/* Step19: Set SWCTL.sw_done to 0 */
reg32_write(DDRC_SWCTL(0), 0x00000000);
/* Step20: Set DFIMISC.dfi_init_start to 0 */
clrbits_le32(DDRC_DFIMISC(0), (0x1 << 5));
/* Step21: optional */
/* Step22: Set DFIMISC.dfi_init_complete_en to 1 */
setbits_le32(DDRC_DFIMISC(0), 0x1);
/* Step23: Set PWRCTL.selfref_sw to 0 */
clrbits_le32(DDRC_PWRCTL(0), (0x1 << 5));
/* Step24: Set SWCTL.sw_done to 1; need polling SWSTAT.sw_done_ack */
reg32_write(DDRC_SWCTL(0), 0x00000001);
do {
tmp = reg32_read(DDRC_SWSTAT(0));
} while ((tmp & 0x1) == 0x0);
/* Step25: Wait for dwc_ddr_umctl2 to move to normal operating mode by monitoring
* STAT.operating_mode signal */
do {
tmp = reg32_read(DDRC_STAT(0));
} while ((tmp & 0x3) != 0x1);
/* Step26: Set back register in Step4 to the original values if desired */
reg32_write(DDRC_RFSHCTL3(0), 0x0000000);
/* enable selfref_en by default */
setbits_le32(DDRC_PWRCTL(0), 0x1 << 3);
/* enable port 0 */
reg32_write(DDRC_PCTRL_0(0), 0x00000001);
printf("DDRINFO: ddrmix config done\n");
/* save the dram timing config into memory */
dram_config_save(dram_timing, CONFIG_SAVED_DRAM_TIMING_BASE);
}

4
drivers/ddr/imx/imx8m/ddrphy_utils.c
View file

@ -122,6 +122,10 @@ void ddrphy_init_set_dfi_clk(unsigned int drate)
dram_pll_init(MHZ(400));
dram_disable_bypass();
break;
case 1066:
dram_pll_init(MHZ(266));
dram_disable_bypass();
break;
case 667:
dram_pll_init(MHZ(167));
dram_disable_bypass();

10
drivers/ddr/imx/imx8m/helper.c
View file

@ -67,7 +67,7 @@ void ddr_load_train_firmware(enum fw_type type)
i += 4;
}
debug("check ddr4_pmu_train_imem code\n");
debug("check ddr_pmu_train_imem code\n");
pr_from32 = imem_start;
pr_to32 = DDR_TRAIN_CODE_BASE_ADDR + 4 * IMEM_OFFSET_ADDR;
for (i = 0x0; i < IMEM_LEN; ) {
@ -84,9 +84,9 @@ void ddr_load_train_firmware(enum fw_type type)
i += 4;
}
if (error)
printf("check ddr4_pmu_train_imem code fail=%d\n", error);
printf("check ddr_pmu_train_imem code fail=%d\n", error);
else
debug("check ddr4_pmu_train_imem code pass\n");
debug("check ddr_pmu_train_imem code pass\n");
debug("check ddr4_pmu_train_dmem code\n");
pr_from32 = dmem_start;
@ -105,9 +105,9 @@ void ddr_load_train_firmware(enum fw_type type)
}
if (error)
printf("check ddr4_pmu_train_dmem code fail=%d", error);
printf("check ddr_pmu_train_dmem code fail=%d", error);
else
debug("check ddr4_pmu_train_dmem code pass\n");
debug("check ddr_pmu_train_dmem code pass\n");
}
void ddrphy_trained_csr_save(struct dram_cfg_param *ddrphy_csr,

191
drivers/ddr/imx/imx8m/lpddr4_init.c
View file

@ -1,191 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2018 NXP
*
*/
#include <common.h>
#include <errno.h>
#include <asm/io.h>
#include <asm/arch/ddr.h>
#include <asm/arch/clock.h>
#include <asm/arch/ddr.h>
#include <asm/arch/lpddr4_define.h>
#include <asm/arch/sys_proto.h>
void lpddr4_cfg_umctl2(struct dram_cfg_param *ddrc_cfg, int num)
{
int i = 0;
for (i = 0; i < num; i++) {
reg32_write(ddrc_cfg->reg, ddrc_cfg->val);
ddrc_cfg++;
}
}
void ddr_init(struct dram_timing_info *dram_timing)
{
unsigned int tmp;
debug("DDRINFO: start lpddr4 ddr init\n");
/* step 1: reset */
if (is_imx8mq()) {
reg32_write(SRC_DDRC_RCR_ADDR + 0x04, 0x8F00000F);
reg32_write(SRC_DDRC_RCR_ADDR, 0x8F00000F);
reg32_write(SRC_DDRC_RCR_ADDR + 0x04, 0x8F000000);
} else {
reg32_write(SRC_DDRC_RCR_ADDR, 0x8F00001F);
reg32_write(SRC_DDRC_RCR_ADDR, 0x8F00000F);
}
mdelay(100);
debug("DDRINFO: reset done\n");
/*
* change the clock source of dram_apb_clk_root:
* source 4 800MHz /4 = 200MHz
*/
clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON |
CLK_ROOT_SOURCE_SEL(4) |
CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV4));
/* disable iso */
reg32_write(0x303A00EC, 0x0000ffff); /* PGC_CPU_MAPPING */
reg32setbit(0x303A00F8, 5); /* PU_PGC_SW_PUP_REQ */
debug("DDRINFO: cfg clk\n");
if (is_imx8mq())
dram_pll_init(MHZ(800));
else
dram_pll_init(MHZ(750));
/*
* release [0]ddr1_preset_n, [1]ddr1_core_reset_n,
* [2]ddr1_phy_reset, [3]ddr1_phy_pwrokin_n
*/
reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000006);
/*step2 Configure uMCTL2's registers */
debug("DDRINFO: ddrc config start\n");
lpddr4_cfg_umctl2(dram_timing->ddrc_cfg, dram_timing->ddrc_cfg_num);
debug("DDRINFO: ddrc config done\n");
/*
* step3 de-assert all reset
* RESET: <core_ddrc_rstn> DEASSERTED
* RESET: <aresetn> for Port 0 DEASSERT(0)ED
*/
reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000004);
reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000000);
reg32_write(DDRC_DBG1(0), 0x00000000);
/* step4 */
/* [0]dis_auto_refresh=1 */
reg32_write(DDRC_RFSHCTL3(0), 0x00000011);
/* [8]--1: lpddr4_sr allowed; [5]--1: software entry to SR */
reg32_write(DDRC_PWRCTL(0), 0x000000a8);
do {
tmp = reg32_read(DDRC_STAT(0));
} while ((tmp & 0x33f) != 0x223);
reg32_write(DDRC_DDR_SS_GPR0, 0x01); /* LPDDR4 mode */
/* step5 */
reg32_write(DDRC_SWCTL(0), 0x00000000);
/* step6 */
tmp = reg32_read(DDRC_MSTR2(0));
if (tmp == 0x2)
reg32_write(DDRC_DFIMISC(0), 0x00000210);
else if (tmp == 0x1)
reg32_write(DDRC_DFIMISC(0), 0x00000110);
else
reg32_write(DDRC_DFIMISC(0), 0x00000010);
/* step7 [0]--1: disable quasi-dynamic programming */
reg32_write(DDRC_SWCTL(0), 0x00000001);
/* step8 Configure LPDDR4 PHY's registers */
debug("DDRINFO:ddrphy config start\n");
ddr_cfg_phy(dram_timing);
debug("DDRINFO: ddrphy config done\n");
/*
* step14 CalBusy.0 =1, indicates the calibrator is actively
* calibrating. Wait Calibrating done.
*/
do {
tmp = reg32_read(DDRPHY_CalBusy(0));
} while ((tmp & 0x1));
debug("DDRINFO:ddrphy calibration done\n");
/* step15 [0]--0: to enable quasi-dynamic programming */
reg32_write(DDRC_SWCTL(0), 0x00000000);
/* step16 */
tmp = reg32_read(DDRC_MSTR2(0));
if (tmp == 0x2)
reg32_write(DDRC_DFIMISC(0), 0x00000230);
else if (tmp == 0x1)
reg32_write(DDRC_DFIMISC(0), 0x00000130);
else
reg32_write(DDRC_DFIMISC(0), 0x00000030);
/* step17 [0]--1: disable quasi-dynamic programming */
reg32_write(DDRC_SWCTL(0), 0x00000001);
/* step18 wait DFISTAT.dfi_init_complete to 1 */
do {
tmp = reg32_read(DDRC_DFISTAT(0));
} while ((tmp & 0x1) == 0x0);
/* step19 */
reg32_write(DDRC_SWCTL(0), 0x00000000);
/* step20~22 */
tmp = reg32_read(DDRC_MSTR2(0));
if (tmp == 0x2) {
reg32_write(DDRC_DFIMISC(0), 0x00000210);
/* set DFIMISC.dfi_init_complete_en again */
reg32_write(DDRC_DFIMISC(0), 0x00000211);
} else if (tmp == 0x1) {
reg32_write(DDRC_DFIMISC(0), 0x00000110);
/* set DFIMISC.dfi_init_complete_en again */
reg32_write(DDRC_DFIMISC(0), 0x00000111);
} else {
/* clear DFIMISC.dfi_init_complete_en */
reg32_write(DDRC_DFIMISC(0), 0x00000010);
/* set DFIMISC.dfi_init_complete_en again */
reg32_write(DDRC_DFIMISC(0), 0x00000011);
}
/* step23 [5]selfref_sw=0; */
reg32_write(DDRC_PWRCTL(0), 0x00000008);
/* step24 sw_done=1 */
reg32_write(DDRC_SWCTL(0), 0x00000001);
/* step25 wait SWSTAT.sw_done_ack to 1 */
do {
tmp = reg32_read(DDRC_SWSTAT(0));
} while ((tmp & 0x1) == 0x0);
#ifdef DFI_BUG_WR
reg32_write(DDRC_DFIPHYMSTR(0), 0x00000001);
#endif
/* wait STAT.operating_mode([1:0] for ddr3) to normal state */
do {
tmp = reg32_read(DDRC_STAT(0));
} while ((tmp & 0x3) != 0x1);
/* step26 */
reg32_write(DDRC_RFSHCTL3(0), 0x00000010);
/* enable port 0 */
reg32_write(DDRC_PCTRL_0(0), 0x00000001);
debug("DDRINFO: ddrmix config done\n");
/* save the dram timing config into memory */
dram_config_save(dram_timing, CONFIG_SAVED_DRAM_TIMING_BASE);
}