From 7e2ec1de1d2d723b59d7dd2fb85ff71b952d63af Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 19 Feb 2009 18:20:39 +0300 Subject: [PATCH] mpc83xx: MPC837XEMDS: Initialize SerDes before negating PCIE reset signal The SerDes initialization should be finished before negating the reset signal according to the reference manual. This isn't an issue on real hardware, but we'd better stick to the specifications anyway. Suggested-by: Liu Dave Signed-off-by: Anton Vorontsov Signed-off-by: Kim Phillips --- board/freescale/mpc837xemds/pci.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/board/freescale/mpc837xemds/pci.c b/board/freescale/mpc837xemds/pci.c index 31116b31ce..29de2e77f0 100644 --- a/board/freescale/mpc837xemds/pci.c +++ b/board/freescale/mpc837xemds/pci.c @@ -115,6 +115,13 @@ skip_pci: if (PARTID_NO_E(spridr) == SPR_8379) return; + if (pex2) + fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX_X2, + FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); + else + fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX, + FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); + /* Configure the clock for PCIE controller */ clrsetbits_be32(&clk->sccr, SCCR_PCIEXP1CM | SCCR_PCIEXP2CM, SCCR_PCIEXP1CM_1 | SCCR_PCIEXP2CM_1); @@ -132,13 +139,6 @@ skip_pci: out_be32(&pcie_law[1].bar, CONFIG_SYS_PCIE2_BASE & LAWBAR_BAR); out_be32(&pcie_law[1].ar, LBLAWAR_EN | LBLAWAR_512MB); - if (pex2) - fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX_X2, - FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); - else - fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX, - FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); - mpc83xx_pcie_init(pex2 ? 1 : 2, pcie_reg, 0); }