spi: mtk_spim: get spi clk rate only once

We don't really need to switch clk rate during operating SPIM controller.
Get clk rate only once at driver probing.

Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
This commit is contained in:
Weijie Gao 2023-07-19 17:15:54 +08:00 committed by Tom Rini
parent fd9385abe2
commit 793e623011

View file

@ -137,6 +137,8 @@ struct mtk_spim_capability {
* @state: Controller state
* @sel_clk: Pad clock
* @spi_clk: Core clock
* @pll_clk_rate: Controller's PLL source clock rate, which is different
* from SPI bus clock rate
* @xfer_len: Current length of data for transfer
* @hw_cap: Controller capabilities
* @tick_dly: Used to postpone SPI sampling time
@ -149,6 +151,7 @@ struct mtk_spim_priv {
void __iomem *base;
u32 state;
struct clk sel_clk, spi_clk;
u32 pll_clk_rate;
u32 xfer_len;
struct mtk_spim_capability hw_cap;
u32 tick_dly;
@ -253,11 +256,10 @@ static int mtk_spim_hw_init(struct spi_slave *slave)
static void mtk_spim_prepare_transfer(struct mtk_spim_priv *priv,
u32 speed_hz)
{
u32 spi_clk_hz, div, sck_time, cs_time, reg_val;
u32 div, sck_time, cs_time, reg_val;
spi_clk_hz = clk_get_rate(&priv->spi_clk);
if (speed_hz <= spi_clk_hz / 4)
div = DIV_ROUND_UP(spi_clk_hz, speed_hz);
if (speed_hz <= priv->pll_clk_rate / 4)
div = DIV_ROUND_UP(priv->pll_clk_rate, speed_hz);
else
div = 4;
@ -404,7 +406,7 @@ static int mtk_spim_transfer_wait(struct spi_slave *slave,
{
struct udevice *bus = dev_get_parent(slave->dev);
struct mtk_spim_priv *priv = dev_get_priv(bus);
u32 sck_l, sck_h, spi_bus_clk, clk_count, reg;
u32 sck_l, sck_h, clk_count, reg;
ulong us = 1;
int ret = 0;
@ -413,12 +415,11 @@ static int mtk_spim_transfer_wait(struct spi_slave *slave,
else
clk_count = op->data.nbytes;
spi_bus_clk = clk_get_rate(&priv->spi_clk);
sck_l = readl(priv->base + SPI_CFG2_REG) >> SPI_CFG2_SCK_LOW_OFFSET;
sck_h = readl(priv->base + SPI_CFG2_REG) & SPI_CFG2_SCK_HIGH_MASK;
do_div(spi_bus_clk, sck_l + sck_h + 2);
do_div(priv->pll_clk_rate, sck_l + sck_h + 2);
us = CLK_TO_US(spi_bus_clk, clk_count * 8);
us = CLK_TO_US(priv->pll_clk_rate, clk_count * 8);
us += 1000 * 1000; /* 1s tolerance */
if (us > UINT_MAX)
@ -662,6 +663,10 @@ static int mtk_spim_probe(struct udevice *dev)
clk_enable(&priv->sel_clk);
clk_enable(&priv->spi_clk);
priv->pll_clk_rate = clk_get_rate(&priv->spi_clk);
if (priv->pll_clk_rate == 0)
return -EINVAL;
return 0;
}