Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-10 15:14:43 +00:00
Code Issues Projects Releases Packages Wiki Activity

i2c: soft_i2c: add simple GPIO implementation

Browse source 
Since the vast majority of GPIO I2C implementations behave the same way,
support the common GPIO framework with default settings.

This adds two new defines CONFIG_SOFT_I2C_GPIO_{SCL,SDA} so that boards
which want GPIO I2C support need only define these.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Tested-by: Thomas Chou <thomas@wytron.com.tw>
This commit is contained in:
Mike Frysinger 2010-07-21 13:38:02 -04:00 committed by Heiko Schocher
parent 1f82ff4777
commit 793b5726f7
2 changed files with 62 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

10
README
View file

@ -1495,6 +1495,16 @@ The following options need to be configured:
#define I2C_DELAY udelay(2)
CONFIG_SOFT_I2C_GPIO_SCL / CONFIG_SOFT_I2C_GPIO_SDA
If your arch supports the generic GPIO framework (asm/gpio.h),
then you may alternatively define the two GPIOs that are to be
used as SCL / SDA. Any of the previous I2C_xxx macros will
have GPIO-based defaults assigned to them as appropriate.
You should define these to the GPIO value as given directly to
the generic GPIO functions.
CONFIG_SYS_I2C_INIT_BOARD
When a board is reset during an i2c bus transfer

52
drivers/i2c/soft_i2c.c
View file

@ -51,6 +51,58 @@
#endif
#include <i2c.h>
#if defined(CONFIG_SOFT_I2C_GPIO_SCL)
# include <asm/gpio.h>
# ifndef I2C_GPIO_SYNC
# define I2C_GPIO_SYNC
# endif
# ifndef I2C_INIT
# define I2C_INIT \
do { \
gpio_request(CONFIG_SOFT_I2C_GPIO_SCL, "soft_i2c"); \
gpio_request(CONFIG_SOFT_I2C_GPIO_SDA, "soft_i2c"); \
} while (0)
# endif
# ifndef I2C_ACTIVE
# define I2C_ACTIVE do { } while (0)
# endif
# ifndef I2C_TRISTATE
# define I2C_TRISTATE do { } while (0)
# endif
# ifndef I2C_READ
# define I2C_READ gpio_get_value(CONFIG_SOFT_I2C_GPIO_SDA)
# endif
# ifndef I2C_SDA
# define I2C_SDA(bit) \
do { \
if (bit) \
gpio_direction_input(CONFIG_SOFT_I2C_GPIO_SDA); \
else \
gpio_direction_output(CONFIG_SOFT_I2C_GPIO_SDA, 0); \
I2C_GPIO_SYNC; \
} while (0)
# endif
# ifndef I2C_SCL
# define I2C_SCL(bit) \
do { \
gpio_direction_output(CONFIG_SOFT_I2C_GPIO_SCL, bit); \
I2C_GPIO_SYNC; \
} while (0)
# endif
# ifndef I2C_DELAY
# define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
# endif
#endif
/* #define DEBUG_I2C */
#ifdef DEBUG_I2C