mx7dsabresd: enable DFU support

On the target board:

  => dfu 0 mmc 0

On the host PC:

  $ dfu-util -l

    Found DFU: [0525:a4a5] devnum=0, cfg=1, intf=0, alt=0, name="image"
    Found DFU: [0525:a4a5] devnum=0, cfg=1, intf=0, alt=1, name="u-boot"
    Found DFU: [0525:a4a5] devnum=0, cfg=1, intf=0, alt=2, name="bootimg"
    Found DFU: [0525:a4a5] devnum=0, cfg=1, intf=0, alt=3, name="rootfs"

  Update with a full SD image

  $ dfu-util -a image -D core-image-minimal-imx7dsabresd.sdcard

  Update u-boot only

  $ dfu-util -a u-boot -D u-boot.imx

Signed-off-by: Tzu-Jung Lee <roylee17@currantlabs.com>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
This commit is contained in:
Tzu-Jung Lee 2015-10-27 23:00:50 +00:00 committed by Stefano Babic
parent 5f5620ab26
commit 73f1b80c77

View file

@ -69,8 +69,15 @@
"initrd_high=0xffffffff\0" \
"bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
#define CONFIG_DFU_ENV_SETTINGS \
"dfu_alt_info=image raw 0 0x800000;"\
"u-boot raw 0 0x4000;"\
"bootimg part 0 1;"\
"rootfs part 0 2\0" \
#define CONFIG_EXTRA_ENV_SETTINGS \
CONFIG_MFG_ENV_SETTINGS \
CONFIG_DFU_ENV_SETTINGS \
"script=boot.scr\0" \
"image=zImage\0" \
"console=ttymxc0\0" \
@ -192,4 +199,24 @@
#define CONFIG_IMX_THERMAL
#define CONFIG_CI_UDC
#define CONFIG_USBD_HS
#define CONFIG_USB_GADGET_DUALSPEED
#define CONFIG_USB_GADGET
#define CONFIG_CMD_USB_MASS_STORAGE
#define CONFIG_USB_FUNCTION_MASS_STORAGE
#define CONFIG_USB_GADGET_DOWNLOAD
#define CONFIG_USB_GADGET_VBUS_DRAW 2
#define CONFIG_G_DNL_VENDOR_NUM 0x0525
#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
#define CONFIG_G_DNL_MANUFACTURER "FSL"
/* USB Device Firmware Update support */
#define CONFIG_CMD_DFU
#define CONFIG_USB_FUNCTION_DFU
#define CONFIG_DFU_MMC
#define CONFIG_DFU_RAM
#endif /* __CONFIG_H */