spi: zynq_[q]spi: Use BIT macro

Used BIT macro on zynq_spi.c and zynq_qspi.c

:%s/(1 << nr)/BIT(nr)/g
where nr = 0, 1, 2 .... 31

Cc: Michal Simek <michal.simek@xilinx.com>
Acked-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
This commit is contained in:
Jagan Teki 2015-10-22 20:40:16 +05:30
parent e5e0d68f27
commit 736b4df15d
2 changed files with 18 additions and 18 deletions

View file

@ -16,20 +16,20 @@
DECLARE_GLOBAL_DATA_PTR; DECLARE_GLOBAL_DATA_PTR;
/* zynq qspi register bit masks ZYNQ_QSPI_<REG>_<BIT>_MASK */ /* zynq qspi register bit masks ZYNQ_QSPI_<REG>_<BIT>_MASK */
#define ZYNQ_QSPI_CR_IFMODE_MASK (1 << 31) /* Flash intrface mode*/ #define ZYNQ_QSPI_CR_IFMODE_MASK BIT(31) /* Flash intrface mode*/
#define ZYNQ_QSPI_CR_MSA_MASK (1 << 15) /* Manual start enb */ #define ZYNQ_QSPI_CR_MSA_MASK BIT(15) /* Manual start enb */
#define ZYNQ_QSPI_CR_MCS_MASK (1 << 14) /* Manual chip select */ #define ZYNQ_QSPI_CR_MCS_MASK BIT(14) /* Manual chip select */
#define ZYNQ_QSPI_CR_PCS_MASK (1 << 10) /* Peri chip select */ #define ZYNQ_QSPI_CR_PCS_MASK BIT(10) /* Peri chip select */
#define ZYNQ_QSPI_CR_FW_MASK (0x3 << 6) /* FIFO width */ #define ZYNQ_QSPI_CR_FW_MASK (0x3 << 6) /* FIFO width */
#define ZYNQ_QSPI_CR_SS_MASK (0xF << 10) /* Slave Select */ #define ZYNQ_QSPI_CR_SS_MASK (0xF << 10) /* Slave Select */
#define ZYNQ_QSPI_CR_BAUD_MASK (0x7 << 3) /* Baud rate div */ #define ZYNQ_QSPI_CR_BAUD_MASK (0x7 << 3) /* Baud rate div */
#define ZYNQ_QSPI_CR_CPHA_MASK (1 << 2) /* Clock phase */ #define ZYNQ_QSPI_CR_CPHA_MASK BIT(2) /* Clock phase */
#define ZYNQ_QSPI_CR_CPOL_MASK (1 << 1) /* Clock polarity */ #define ZYNQ_QSPI_CR_CPOL_MASK BIT(1) /* Clock polarity */
#define ZYNQ_QSPI_CR_MSTREN_MASK (1 << 0) /* Mode select */ #define ZYNQ_QSPI_CR_MSTREN_MASK BIT(0) /* Mode select */
#define ZYNQ_QSPI_IXR_RXNEMPTY_MASK (1 << 4) /* RX_FIFO_not_empty */ #define ZYNQ_QSPI_IXR_RXNEMPTY_MASK BIT(4) /* RX_FIFO_not_empty */
#define ZYNQ_QSPI_IXR_TXOW_MASK (1 << 2) /* TX_FIFO_not_full */ #define ZYNQ_QSPI_IXR_TXOW_MASK BIT(2) /* TX_FIFO_not_full */
#define ZYNQ_QSPI_IXR_ALL_MASK 0x7F /* All IXR bits */ #define ZYNQ_QSPI_IXR_ALL_MASK 0x7F /* All IXR bits */
#define ZYNQ_QSPI_ENR_SPI_EN_MASK (1 << 0) /* SPI Enable */ #define ZYNQ_QSPI_ENR_SPI_EN_MASK BIT(0) /* SPI Enable */
/* zynq qspi Transmit Data Register */ /* zynq qspi Transmit Data Register */
#define ZYNQ_QSPI_TXD_00_00_OFFSET 0x1C /* Transmit 4-byte inst */ #define ZYNQ_QSPI_TXD_00_00_OFFSET 0x1C /* Transmit 4-byte inst */

View file

@ -16,17 +16,17 @@
DECLARE_GLOBAL_DATA_PTR; DECLARE_GLOBAL_DATA_PTR;
/* zynq spi register bit masks ZYNQ_SPI_<REG>_<BIT>_MASK */ /* zynq spi register bit masks ZYNQ_SPI_<REG>_<BIT>_MASK */
#define ZYNQ_SPI_CR_MSA_MASK (1 << 15) /* Manual start enb */ #define ZYNQ_SPI_CR_MSA_MASK BIT(15) /* Manual start enb */
#define ZYNQ_SPI_CR_MCS_MASK (1 << 14) /* Manual chip select */ #define ZYNQ_SPI_CR_MCS_MASK BIT(14) /* Manual chip select */
#define ZYNQ_SPI_CR_CS_MASK (0xF << 10) /* Chip select */ #define ZYNQ_SPI_CR_CS_MASK (0xF << 10) /* Chip select */
#define ZYNQ_SPI_CR_BAUD_MASK (0x7 << 3) /* Baud rate div */ #define ZYNQ_SPI_CR_BAUD_MASK (0x7 << 3) /* Baud rate div */
#define ZYNQ_SPI_CR_CPHA_MASK (1 << 2) /* Clock phase */ #define ZYNQ_SPI_CR_CPHA_MASK BIT(2) /* Clock phase */
#define ZYNQ_SPI_CR_CPOL_MASK (1 << 1) /* Clock polarity */ #define ZYNQ_SPI_CR_CPOL_MASK BIT(1) /* Clock polarity */
#define ZYNQ_SPI_CR_MSTREN_MASK (1 << 0) /* Mode select */ #define ZYNQ_SPI_CR_MSTREN_MASK BIT(0) /* Mode select */
#define ZYNQ_SPI_IXR_RXNEMPTY_MASK (1 << 4) /* RX_FIFO_not_empty */ #define ZYNQ_SPI_IXR_RXNEMPTY_MASK BIT(4) /* RX_FIFO_not_empty */
#define ZYNQ_SPI_IXR_TXOW_MASK (1 << 2) /* TX_FIFO_not_full */ #define ZYNQ_SPI_IXR_TXOW_MASK BIT(2) /* TX_FIFO_not_full */
#define ZYNQ_SPI_IXR_ALL_MASK 0x7F /* All IXR bits */ #define ZYNQ_SPI_IXR_ALL_MASK 0x7F /* All IXR bits */
#define ZYNQ_SPI_ENR_SPI_EN_MASK (1 << 0) /* SPI Enable */ #define ZYNQ_SPI_ENR_SPI_EN_MASK BIT(0) /* SPI Enable */
#define ZYNQ_SPI_CR_BAUD_MAX 8 /* Baud rate divisor max val */ #define ZYNQ_SPI_CR_BAUD_MAX 8 /* Baud rate divisor max val */
#define ZYNQ_SPI_CR_BAUD_SHIFT 3 /* Baud rate divisor shift */ #define ZYNQ_SPI_CR_BAUD_SHIFT 3 /* Baud rate divisor shift */