Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-11 07:34:31 +00:00
Code Issues Projects Releases Packages Wiki Activity

Blackfin: add driver for on-chip MMC/SD controller

Browse source 
This is a port of the Linux Blackfin on-chip SDH driver to U-Boot.

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This commit is contained in:
Cliff Cai 2008-11-29 18:22:38 -05:00 committed by Mike Frysinger
parent 6e87ea0ca9
commit 716ebf436c
5 changed files with 729 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

1
drivers/mmc/Makefile
View file

@ -26,6 +26,7 @@ include $(TOPDIR)/config.mk
LIB := $(obj)libmmc.a
COBJS-$(CONFIG_ATMEL_MCI) += atmel_mci.o
COBJS-$(CONFIG_BFIN_SDH) += bfin_sdh.o
COBJS-$(CONFIG_OMAP3_MMC) += omap3_mmc.o
COBJS := $(COBJS-y)

546
drivers/mmc/bfin_sdh.c Normal file
View file

@ -0,0 +1,546 @@
/*
* Driver for Blackfin on-chip SDH controller
*
* Copyright (c) 2008 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#include <common.h>
#include <malloc.h>
#include <part.h>
#include <mmc.h>
#include <asm/io.h>
#include <asm/errno.h>
#include <asm/byteorder.h>
#include <asm/blackfin.h>
#include <asm/mach-common/bits/sdh.h>
#include <asm/mach-common/bits/dma.h>
#include "bfin_sdh.h"
/* SD_CLK frequency must be less than 400k in identification mode */
#ifndef CONFIG_SYS_MMC_CLK_ID
#define CONFIG_SYS_MMC_CLK_ID 200000
#endif
/* SD_CLK for normal working */
#ifndef CONFIG_SYS_MMC_CLK_OP
#define CONFIG_SYS_MMC_CLK_OP 25000000
#endif
/* support 3.2-3.3V and 3.3-3.4V */
#define CONFIG_SYS_MMC_OP_COND 0x00300000
#define MMC_DEFAULT_RCA 1
#if defined(__ADSPBF51x__)
# define bfin_read_SDH_PWR_CTL bfin_read_RSI_PWR_CONTROL
# define bfin_write_SDH_PWR_CTL bfin_write_RSI_PWR_CONTROL
# define bfin_read_SDH_CLK_CTL bfin_read_RSI_CLK_CONTROL
# define bfin_write_SDH_CLK_CTL bfin_write_RSI_CLK_CONTROL
# define bfin_write_SDH_ARGUMENT bfin_write_RSI_ARGUMENT
# define bfin_write_SDH_COMMAND bfin_write_RSI_COMMAND
# define bfin_read_SDH_RESPONSE0 bfin_read_RSI_RESPONSE0
# define bfin_read_SDH_RESPONSE1 bfin_read_RSI_RESPONSE1
# define bfin_read_SDH_RESPONSE2 bfin_read_RSI_RESPONSE2
# define bfin_read_SDH_RESPONSE3 bfin_read_RSI_RESPONSE3
# define bfin_write_SDH_DATA_TIMER bfin_write_RSI_DATA_TIMER
# define bfin_write_SDH_DATA_LGTH bfin_write_RSI_DATA_LGTH
# define bfin_read_SDH_DATA_CTL bfin_read_RSI_DATA_CONTROL
# define bfin_write_SDH_DATA_CTL bfin_write_RSI_DATA_CONTROL
# define bfin_read_SDH_STATUS bfin_read_RSI_STATUS
# define bfin_write_SDH_STATUS_CLR bfin_write_RSI_STATUSCL
# define bfin_read_SDH_CFG bfin_read_RSI_CONFIG
# define bfin_write_SDH_CFG bfin_write_RSI_CONFIG
# define bfin_write_DMA_START_ADDR bfin_write_DMA4_START_ADDR
# define bfin_write_DMA_X_COUNT bfin_write_DMA4_X_COUNT
# define bfin_write_DMA_X_MODIFY bfin_write_DMA4_X_MODIFY
# define bfin_write_DMA_CONFIG bfin_write_DMA4_CONFIG
#elif defined(__ADSPBF54x__)
# define bfin_write_DMA_START_ADDR bfin_write_DMA22_START_ADDR
# define bfin_write_DMA_X_COUNT bfin_write_DMA22_X_COUNT
# define bfin_write_DMA_X_MODIFY bfin_write_DMA22_X_MODIFY
# define bfin_write_DMA_CONFIG bfin_write_DMA22_CONFIG
#else
# error no support for this proc yet
#endif
static unsigned int mmc_rca;
static int mmc_card_is_sd;
static block_dev_desc_t mmc_blkdev;
struct mmc_cid cid;
static __u32 csd[4];
#define get_bits(resp, start, size) \
({ \
const int __size = size; \
const uint32_t __mask = (__size < 32 ? 1 << __size : 0) - 1; \
const int32_t __off = 3 - ((start) / 32); \
const int32_t __shft = (start) & 31; \
uint32_t __res; \
\
__res = resp[__off] >> __shft; \
if (__size + __shft > 32) \
__res |= resp[__off-1] << ((32 - __shft) % 32); \
__res & __mask; \
})
block_dev_desc_t *mmc_get_dev(int dev)
{
return &mmc_blkdev;
}
static void mci_set_clk(unsigned long clk)
{
unsigned long sys_clk;
unsigned long clk_div;
__u16 clk_ctl = 0;
/* setting SD_CLK */
sys_clk = get_sclk();
bfin_write_SDH_CLK_CTL(0);
if (sys_clk % (2 * clk) == 0)
clk_div = sys_clk / (2 * clk) - 1;
else
clk_div = sys_clk / (2 * clk);
if (clk_div > 0xff)
clk_div = 0xff;
clk_ctl |= (clk_div & 0xff);
clk_ctl |= CLK_E;
bfin_write_SDH_CLK_CTL(clk_ctl);
}
static int
mmc_cmd(unsigned long cmd, unsigned long arg, void *resp, unsigned long flags)
{
unsigned int sdh_cmd;
unsigned int status;
int ret = 0;
sdh_cmd = 0;
unsigned long *response = resp;
sdh_cmd |= cmd;
if (flags & MMC_RSP_PRESENT)
sdh_cmd |= CMD_RSP;
if (flags & MMC_RSP_136)
sdh_cmd |= CMD_L_RSP;
bfin_write_SDH_ARGUMENT(arg);
bfin_write_SDH_COMMAND(sdh_cmd | CMD_E);
/* wait for a while */
do {
udelay(1);
status = bfin_read_SDH_STATUS();
} while (!(status & (CMD_SENT | CMD_RESP_END | CMD_TIME_OUT |
CMD_CRC_FAIL)));
if (flags & MMC_RSP_PRESENT) {
response[0] = bfin_read_SDH_RESPONSE0();
if (flags & MMC_RSP_136) {
response[1] = bfin_read_SDH_RESPONSE1();
response[2] = bfin_read_SDH_RESPONSE2();
response[3] = bfin_read_SDH_RESPONSE3();
}
}
if (status & CMD_TIME_OUT) {
printf("CMD%d timeout\n", (int)cmd);
ret |= -ETIMEDOUT;
} else if (status & CMD_CRC_FAIL && flags & MMC_RSP_CRC) {
printf("CMD%d CRC failure\n", (int)cmd);
ret |= -EILSEQ;
}
bfin_write_SDH_STATUS_CLR(CMD_SENT_STAT | CMD_RESP_END_STAT |
CMD_TIMEOUT_STAT | CMD_CRC_FAIL_STAT);
return ret;
}
static int
mmc_acmd(unsigned long cmd, unsigned long arg, void *resp, unsigned long flags)
{
unsigned long aresp[4];
int ret = 0;
ret = mmc_cmd(MMC_CMD_APP_CMD, 0, aresp,
MMC_RSP_PRESENT);
if (ret)
return ret;
if ((aresp[0] & (ILLEGAL_COMMAND | APP_CMD)) != APP_CMD)
return -ENODEV;
ret = mmc_cmd(cmd, arg, resp, flags);
return ret;
}
static unsigned long
mmc_bread(int dev, unsigned long start, lbaint_t blkcnt, void *buffer)
{
int ret, i;
unsigned long resp[4];
unsigned long card_status;
__u8 *buf = buffer;
__u32 status;
__u16 data_ctl = 0;
__u16 dma_cfg = 0;
if (blkcnt == 0)
return 0;
debug("mmc_bread: dev %d, start %d, blkcnt %d\n", dev, start, blkcnt);
/* Force to use 512-byte block,because a lot of code depends on this */
data_ctl |= 9 << 4;
data_ctl |= DTX_DIR;
bfin_write_SDH_DATA_CTL(data_ctl);
dma_cfg |= WDSIZE_32 | RESTART | WNR | DMAEN;
/* FIXME later */
bfin_write_SDH_DATA_TIMER(0xFFFFFFFF);
for (i = 0; i < blkcnt; ++i, ++start) {
blackfin_dcache_flush_invalidate_range(buf + i * mmc_blkdev.blksz,
buf + (i + 1) * mmc_blkdev.blksz);
bfin_write_DMA_START_ADDR(buf + i * mmc_blkdev.blksz);
bfin_write_DMA_X_COUNT(mmc_blkdev.blksz / 4);
bfin_write_DMA_X_MODIFY(4);
bfin_write_DMA_CONFIG(dma_cfg);
bfin_write_SDH_DATA_LGTH(mmc_blkdev.blksz);
/* Put the device into Transfer state */
ret = mmc_cmd(MMC_CMD_SELECT_CARD, mmc_rca << 16, resp, MMC_RSP_R1);
if (ret) {
printf("MMC_CMD_SELECT_CARD failed\n");
goto out;
}
/* Set block length */
ret = mmc_cmd(MMC_CMD_SET_BLOCKLEN, mmc_blkdev.blksz, resp, MMC_RSP_R1);
if (ret) {
printf("MMC_CMD_SET_BLOCKLEN failed\n");
goto out;
}
ret = mmc_cmd(MMC_CMD_READ_SINGLE_BLOCK,
start * mmc_blkdev.blksz, resp,
MMC_RSP_R1);
if (ret) {
printf("MMC_CMD_READ_SINGLE_BLOCK failed\n");
goto out;
}
bfin_write_SDH_DATA_CTL(bfin_read_SDH_DATA_CTL() | DTX_DMA_E | DTX_E);
do {
udelay(1);
status = bfin_read_SDH_STATUS();
} while (!(status & (DAT_BLK_END | DAT_END | DAT_TIME_OUT | DAT_CRC_FAIL | RX_OVERRUN)));
if (status & (DAT_TIME_OUT | DAT_CRC_FAIL | RX_OVERRUN)) {
bfin_write_SDH_STATUS_CLR(DAT_TIMEOUT_STAT | \
DAT_CRC_FAIL_STAT | RX_OVERRUN_STAT);
goto read_error;
} else {
bfin_write_SDH_STATUS_CLR(DAT_BLK_END_STAT | DAT_END_STAT);
mmc_cmd(MMC_CMD_SELECT_CARD, 0, resp, 0);
}
}
out:
return i;
read_error:
mmc_cmd(MMC_CMD_SEND_STATUS, mmc_rca << 16, &card_status, MMC_RSP_R1);
printf("mmc: bread failed, status = %08x, card status = %08lx\n",
status, card_status);
goto out;
}
static unsigned long
mmc_bwrite(int dev, unsigned long start, lbaint_t blkcnt, const void *buffer)
{
int ret, i = 0;
unsigned long resp[4];
unsigned long card_status;
const __u8 *buf = buffer;
__u32 status;
__u16 data_ctl = 0;
__u16 dma_cfg = 0;
if (blkcnt == 0)
return 0;
debug("mmc_bwrite: dev %d, start %lx, blkcnt %lx\n",
dev, start, blkcnt);
/* Force to use 512-byte block,because a lot of code depends on this */
data_ctl |= 9 << 4;
data_ctl &= ~DTX_DIR;
bfin_write_SDH_DATA_CTL(data_ctl);
dma_cfg |= WDSIZE_32 | RESTART | DMAEN;
/* FIXME later */
bfin_write_SDH_DATA_TIMER(0xFFFFFFFF);
for (i = 0; i < blkcnt; ++i, ++start) {
bfin_write_DMA_START_ADDR(buf + i * mmc_blkdev.blksz);
bfin_write_DMA_X_COUNT(mmc_blkdev.blksz / 4);
bfin_write_DMA_X_MODIFY(4);
bfin_write_DMA_CONFIG(dma_cfg);
bfin_write_SDH_DATA_LGTH(mmc_blkdev.blksz);
/* Put the device into Transfer state */
ret = mmc_cmd(MMC_CMD_SELECT_CARD, mmc_rca << 16, resp, MMC_RSP_R1);
if (ret) {
printf("MMC_CMD_SELECT_CARD failed\n");
goto out;
}
/* Set block length */
ret = mmc_cmd(MMC_CMD_SET_BLOCKLEN, mmc_blkdev.blksz, resp, MMC_RSP_R1);
if (ret) {
printf("MMC_CMD_SET_BLOCKLEN failed\n");
goto out;
}
ret = mmc_cmd(MMC_CMD_WRITE_BLOCK,
start * mmc_blkdev.blksz, resp,
MMC_RSP_R1);
if (ret) {
printf("MMC_CMD_WRITE_SINGLE_BLOCK failed\n");
goto out;
}
bfin_write_SDH_DATA_CTL(bfin_read_SDH_DATA_CTL() | DTX_DMA_E | DTX_E);
do {
udelay(1);
status = bfin_read_SDH_STATUS();
} while (!(status & (DAT_BLK_END | DAT_END | DAT_TIME_OUT | DAT_CRC_FAIL | TX_UNDERRUN)));
if (status & (DAT_TIME_OUT | DAT_CRC_FAIL | TX_UNDERRUN)) {
bfin_write_SDH_STATUS_CLR(DAT_TIMEOUT_STAT |
DAT_CRC_FAIL_STAT | TX_UNDERRUN_STAT);
goto write_error;
} else {
bfin_write_SDH_STATUS_CLR(DAT_BLK_END_STAT | DAT_END_STAT);
mmc_cmd(MMC_CMD_SELECT_CARD, 0, resp, 0);
}
}
out:
return i;
write_error:
mmc_cmd(MMC_CMD_SEND_STATUS, mmc_rca << 16, &card_status, MMC_RSP_R1);
printf("mmc: bwrite failed, status = %08x, card status = %08lx\n",
status, card_status);
goto out;
}
static void mmc_parse_cid(struct mmc_cid *cid, unsigned long *resp)
{
cid->mid = resp[0] >> 24;
cid->oid = (resp[0] >> 8) & 0xffff;
cid->pnm[0] = resp[0];
cid->pnm[1] = resp[1] >> 24;
cid->pnm[2] = resp[1] >> 16;
cid->pnm[3] = resp[1] >> 8;
cid->pnm[4] = resp[1];
cid->pnm[5] = resp[2] >> 24;
cid->pnm[6] = 0;
cid->prv = resp[2] >> 16;
cid->psn = (resp[2] << 16) | (resp[3] >> 16);
cid->mdt = resp[3] >> 8;
}
static void sd_parse_cid(struct mmc_cid *cid, unsigned long *resp)
{
cid->mid = resp[0] >> 24;
cid->oid = (resp[0] >> 8) & 0xffff;
cid->pnm[0] = resp[0];
cid->pnm[1] = resp[1] >> 24;
cid->pnm[2] = resp[1] >> 16;
cid->pnm[3] = resp[1] >> 8;
cid->pnm[4] = resp[1];
cid->pnm[5] = 0;
cid->pnm[6] = 0;
cid->prv = resp[2] >> 24;
cid->psn = (resp[2] << 8) | (resp[3] >> 24);
cid->mdt = (resp[3] >> 8) & 0x0fff;
}
static void mmc_dump_cid(const struct mmc_cid *cid)
{
printf("CID information:\n");
printf("Manufacturer ID: %02X\n", cid->mid);
printf("OEM/Application ID: %04X\n", cid->oid);
printf("Product name: %s\n", cid->pnm);
printf("Product Revision: %u.%u\n",
cid->prv >> 4, cid->prv & 0x0f);
printf("Product Serial Number: %lu\n", cid->psn);
printf("Manufacturing Date: %02u/%02u\n",
cid->mdt >> 4, cid->mdt & 0x0f);
}
static void mmc_dump_csd(__u32 *csd)
{
printf("CSD information:\n");
printf("CSD structure version: 1.%u\n", get_bits(csd, 126, 2));
printf("Card command classes: %03x\n", get_bits(csd, 84, 12));
printf("Max trans speed: %s\n", (get_bits(csd, 96, 8) == 0x32) ? "25MHz" : "50MHz");
printf("Read block length: %d\n", 1 << get_bits(csd, 80, 4));
printf("Write block length: %u\n", 1 << get_bits(csd, 22, 4));
printf("Card capacity: %u bytes\n",
(get_bits(csd, 62, 12) + 1) * (1 << (get_bits(csd, 47, 3) + 2)) *
(1 << get_bits(csd, 80, 4)));
putc('\n');
}
static int mmc_idle_cards(void)
{
int ret = 0;
/* Reset all cards */
ret = mmc_cmd(MMC_CMD_GO_IDLE_STATE, 0, NULL, 0);
if (ret)
return ret;
udelay(500);
return mmc_cmd(MMC_CMD_GO_IDLE_STATE, 0, NULL, 0);
}
static int sd_init_card(struct mmc_cid *cid, int verbose)
{
unsigned long resp[4];
int i, ret = 0;
mmc_idle_cards();
for (i = 0; i < 1000; ++i) {
ret = mmc_acmd(SD_CMD_APP_SEND_OP_COND, CONFIG_SYS_MMC_OP_COND,
resp, MMC_RSP_R3);
if (ret || (resp[0] & 0x80000000))
break;
ret = -ETIMEDOUT;
}
if (ret)
return ret;
ret = mmc_cmd(MMC_CMD_ALL_SEND_CID, 0, resp, MMC_RSP_R2);
if (ret)
return ret;
sd_parse_cid(cid, resp);
if (verbose)
mmc_dump_cid(cid);
/* Get RCA of the card that responded */
ret = mmc_cmd(SD_CMD_SEND_RELATIVE_ADDR, 0, resp, MMC_RSP_R6);
if (ret)
return ret;
mmc_rca = (resp[0] >> 16) & 0xffff;
if (verbose)
printf("SD Card detected (RCA %u)\n", mmc_rca);
mmc_card_is_sd = 1;
return 0;
}
static int mmc_init_card(struct mmc_cid *cid, int verbose)
{
unsigned long resp[4];
int i, ret = 0;
mmc_idle_cards();
for (i = 0; i < 1000; ++i) {
ret = mmc_cmd(MMC_CMD_SEND_OP_COND, CONFIG_SYS_MMC_OP_COND, resp,
MMC_RSP_R3);
if (ret || (resp[0] & 0x80000000))
break;
ret = -ETIMEDOUT;
}
if (ret)
return ret;
/* Get CID of all cards. FIXME: Support more than one card */
ret = mmc_cmd(MMC_CMD_ALL_SEND_CID, 0, resp, MMC_RSP_R2);
if (ret)
return ret;
mmc_parse_cid(cid, resp);
if (verbose)
mmc_dump_cid(cid);
/* Set Relative Address of the card that responded */
ret = mmc_cmd(MMC_CMD_SET_RELATIVE_ADDR, mmc_rca << 16, resp,
MMC_RSP_R1);
return ret;
}
int mmc_init(int verbose)
{
__u16 pwr_ctl = 0;
int ret;
unsigned int max_blksz;
/* Initialize sdh controller */
#if defined(__ADSPBF54x__)
bfin_write_DMAC1_PERIMUX(bfin_read_DMAC1_PERIMUX() | 0x1);
bfin_write_PORTC_FER(bfin_read_PORTC_FER() | 0x3F00);
bfin_write_PORTC_MUX(bfin_read_PORTC_MUX() & ~0xFFF0000);
#elif defined(__ADSPBF51x__)
bfin_write_PORTG_FER(bfin_read_PORTG_FER() | 0x01F8);
bfin_write_PORTG_MUX((bfin_read_PORTG_MUX() & ~0x3FC) | 0x154);
#else
# error no portmux for this proc yet
#endif
bfin_write_SDH_CFG(bfin_read_SDH_CFG() | CLKS_EN);
/* Disable card detect pin */
bfin_write_SDH_CFG((bfin_read_SDH_CFG() & 0x1F) | 0x60);
mci_set_clk(CONFIG_SYS_MMC_CLK_ID);
/* setting power control */
pwr_ctl |= ROD_CTL;
pwr_ctl |= PWR_ON;
bfin_write_SDH_PWR_CTL(pwr_ctl);
mmc_card_is_sd = 0;
ret = sd_init_card(&cid, verbose);
if (ret) {
mmc_rca = MMC_DEFAULT_RCA;
ret = mmc_init_card(&cid, verbose);
}
if (ret)
return ret;
/* Get CSD from the card */
ret = mmc_cmd(MMC_CMD_SEND_CSD, mmc_rca << 16, csd, MMC_RSP_R2);
if (ret)
return ret;
if (verbose)
mmc_dump_csd(csd);
/* Initialize the blockdev structure */
mmc_blkdev.if_type = IF_TYPE_MMC;
mmc_blkdev.part_type = PART_TYPE_DOS;
mmc_blkdev.block_read = mmc_bread;
mmc_blkdev.block_write = mmc_bwrite;
sprintf(mmc_blkdev.vendor,
"Man %02x%04x Snr %08lx",
cid.mid, cid.oid, cid.psn);
strncpy(mmc_blkdev.product, cid.pnm,
sizeof(mmc_blkdev.product));
sprintf(mmc_blkdev.revision, "%x %x",
cid.prv >> 4, cid.prv & 0x0f);
max_blksz = 1 << get_bits(csd, 80, 4);
/*
* If we can't use 512 byte blocks, refuse to deal with the
* card. Tons of code elsewhere seems to depend on this.
*/
if (max_blksz < 512 || (max_blksz > 512 && !get_bits(csd, 79, 1))) {
printf("Card does not support 512 byte reads, aborting.\n");
return -ENODEV;
}
mmc_blkdev.blksz = 512;
mmc_blkdev.lba = (get_bits(csd, 62, 12) + 1) * (1 << (get_bits(csd, 47, 3) + 2));
mci_set_clk(CONFIG_SYS_MMC_CLK_OP);
init_part(&mmc_blkdev);
return 0;
}
int mmc_read(ulong src, uchar *dst, int size)
{
return -ENOSYS;
}
int mmc_write(uchar *src, ulong dst, int size)
{
return -ENOSYS;
}
int mmc2info(ulong addr)
{
return 0;
}

59
drivers/mmc/bfin_sdh.h Normal file
View file

@ -0,0 +1,59 @@
/*
* Copyright (C) 2008 Analog Device Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __BLACKFIN_SDH_H__
#define __BLACKFIN_SDH_H__
#define MMC_RSP_PRESENT (1 << 0)
#define MMC_RSP_136 (1 << 1) /* 136 bit response */
#define MMC_RSP_CRC (1 << 2) /* expect valid crc */
#define MMC_RSP_BUSY (1 << 3) /* card may send busy */
#define MMC_RSP_OPCODE (1 << 4) /* response contains opcode */
#define MMC_CMD_MASK (3 << 5) /* non-SPI command type */
#define MMC_CMD_AC (0 << 5)
#define MMC_CMD_ADTC (1 << 5)
#define MMC_CMD_BC (2 << 5)
#define MMC_CMD_BCR (3 << 5)
#define MMC_RSP_SPI_S1 (1 << 7) /* one status byte */
#define MMC_RSP_SPI_S2 (1 << 8) /* second byte */
#define MMC_RSP_SPI_B4 (1 << 9) /* four data bytes */
#define MMC_RSP_SPI_BUSY (1 << 10) /* card may send busy */
/*
* These are the native response types, and correspond to valid bit
* patterns of the above flags. One additional valid pattern
* is all zeros, which means we don't expect a response.
*/
#define MMC_RSP_NONE (0)
#define MMC_RSP_R1 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
#define MMC_RSP_R1B (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE|MMC_RSP_BUSY)
#define MMC_RSP_R2 (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC)
#define MMC_RSP_R3 (MMC_RSP_PRESENT)
#define MMC_RSP_R4 (MMC_RSP_PRESENT)
#define MMC_RSP_R5 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
#define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
#define MMC_RSP_R7 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
#define ILLEGAL_COMMAND (1 << 22)
#define APP_CMD (1 << 5)
#endif

122
include/asm-blackfin/mach-common/bits/sdh.h Normal file
View file

@ -0,0 +1,122 @@
/*
* SDH Masks
*/
#ifndef __BFIN_PERIPHERAL_SDH__
#define __BFIN_PERIPHERAL_SDH__
/* Bit masks for SDH_COMMAND */
#define CMD_IDX 0x3f /* Command Index */
#define CMD_RSP 0x40 /* Response */
#define CMD_L_RSP 0x80 /* Long Response */
#define CMD_INT_E 0x100 /* Command Interrupt */
#define CMD_PEND_E 0x200 /* Command Pending */
#define CMD_E 0x400 /* Command Enable */
/* Bit masks for SDH_PWR_CTL */
#define PWR_ON 0x3 /* Power On */
#define SD_CMD_OD 0x40 /* Open Drain Output */
#define ROD_CTL 0x80 /* Rod Control */
/* Bit masks for SDH_CLK_CTL */
#define CLKDIV 0xff /* MC_CLK Divisor */
#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */
#define PWR_SV_E 0x200 /* Power Save Enable */
#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */
#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */
/* Bit masks for SDH_RESP_CMD */
#define RESP_CMD 0x3f /* Response Command */
/* Bit masks for SDH_DATA_CTL */
#define DTX_E 0x1 /* Data Transfer Enable */
#define DTX_DIR 0x2 /* Data Transfer Direction */
#define DTX_MODE 0x4 /* Data Transfer Mode */
#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */
#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */
/* Bit masks for SDH_STATUS */
#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */
#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */
#define CMD_TIME_OUT 0x4 /* CMD Time Out */
#define DAT_TIME_OUT 0x8 /* Data Time Out */
#define TX_UNDERRUN 0x10 /* Transmit Underrun */
#define RX_OVERRUN 0x20 /* Receive Overrun */
#define CMD_RESP_END 0x40 /* CMD Response End */
#define CMD_SENT 0x80 /* CMD Sent */
#define DAT_END 0x100 /* Data End */
#define START_BIT_ERR 0x200 /* Start Bit Error */
#define DAT_BLK_END 0x400 /* Data Block End */
#define CMD_ACT 0x800 /* CMD Active */
#define TX_ACT 0x1000 /* Transmit Active */
#define RX_ACT 0x2000 /* Receive Active */
#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */
#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */
#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */
#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */
#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */
#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */
#define TX_DAT_RDY 0x100000 /* Transmit Data Available */
#define RX_FIFO_RDY 0x200000 /* Receive Data Available */
/* Bit masks for SDH_STATUS_CLR */
#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */
#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */
#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */
#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */
#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */
#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */
#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */
#define CMD_SENT_STAT 0x80 /* CMD Sent Status */
#define DAT_END_STAT 0x100 /* Data End Status */
#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */
#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */
/* Bit masks for SDH_MASK0 */
#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */
#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */
#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */
#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */
#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */
#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */
#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */
#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */
#define DAT_END_MASK 0x100 /* Data End Mask */
#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */
#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */
#define CMD_ACT_MASK 0x800 /* CMD Active Mask */
#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */
#define RX_ACT_MASK 0x2000 /* Receive Active Mask */
#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */
#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */
#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */
#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */
#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */
#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */
#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */
#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */
/* Bit masks for SDH_FIFO_CNT */
#define FIFO_COUNT 0x7fff /* FIFO Count */
/* Bit masks for SDH_E_STATUS */
#define SDIO_INT_DET 0x2 /* SDIO Int Detected */
#define SD_CARD_DET 0x10 /* SD Card Detect */
/* Bit masks for SDH_E_MASK */
#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */
#define SCD_MSK 0x40 /* Mask Card Detect */
/* Bit masks for SDH_CFG */
#define CLKS_EN 0x1 /* Clocks Enable */
#define SD4E 0x4 /* SDIO 4-Bit Enable */
#define MWE 0x8 /* Moving Window Enable */
#define SD_RST 0x10 /* SDMMC Reset */
#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */
#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */
#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */
/* Bit masks for SDH_RD_WAIT_EN */
#define RWR 0x1 /* Read Wait Request */
#endif

1
include/asm-blackfin/mmc.h Normal file
View file

@ -0,0 +1 @@
#include <asm-avr32/arch-at32ap700x/mmc.h>