mirror of
https://github.com/AsahiLinux/u-boot
synced 2025-03-17 07:16:59 +00:00
ppc4xx: Add AMCC Canyonlands support (460EX) (2/3)
This patch adds support for the AMCC Canyonlands 460EX evaluation board. Signed-off-by: Stefan Roese <sr@denx.de>
This commit is contained in:
Stefan Roese
parent
8e1a3fe545
commit
6983fe21f7
1 changed files with 470 additions and 0 deletions
470
include/configs/canyonlands.h
Normal file
470
include/configs/canyonlands.h
Normal file
|
|
@ -0,0 +1,470 @@
|
|||
/*
|
||||
* (C) Copyright 2008
|
||||
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
/************************************************************************
|
||||
* canyonlands.h - configuration for Canyonlands (460EX)
|
||||
***********************************************************************/
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* High Level Configuration Options
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CONFIG_CANYONLANDS 1 /* Board is Canyonlands */
|
||||
#define CONFIG_440 1
|
||||
#define CONFIG_4xx 1 /* ... PPC4xx family */
|
||||
#define CONFIG_460EX 1 /* Specific PPC460EX support */
|
||||
|
||||
#define CONFIG_SYS_CLK_FREQ 66666667 /* external freq to pll */
|
||||
|
||||
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
|
||||
#define CONFIG_BOARD_EARLY_INIT_R 1 /* Call board_early_init_r */
|
||||
#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Base addresses -- Note these are effective addresses where the
|
||||
* actual resources get mapped (not physical addresses)
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
|
||||
|
||||
#define CFG_PCI_MEMBASE 0x80000000 /* mapped PCI memory */
|
||||
#define CFG_PCI_BASE 0xd0000000 /* internal PCI regs */
|
||||
#define CFG_PCI_TARGBASE CFG_PCI_MEMBASE
|
||||
|
||||
#define CFG_PCIE_MEMBASE 0xb0000000 /* mapped PCIe memory */
|
||||
#define CFG_PCIE_MEMSIZE 0x08000000 /* smallest incr for PCIe port */
|
||||
#define CFG_PCIE_BASE 0xc4000000 /* PCIe UTL regs */
|
||||
|
||||
#define CFG_PCIE0_CFGBASE 0xc0000000
|
||||
#define CFG_PCIE1_CFGBASE 0xc1000000
|
||||
#define CFG_PCIE0_XCFGBASE 0xc3000000
|
||||
#define CFG_PCIE1_XCFGBASE 0xc3001000
|
||||
|
||||
#define CFG_PCIE0_UTLBASE 0xc08010000ULL /* 36bit physical addr */
|
||||
|
||||
/* base address of inbound PCIe window */
|
||||
#define CFG_PCIE_INBOUND_BASE 0x000000000ULL /* 36bit physical addr */
|
||||
|
||||
/* EBC stuff */
|
||||
#define CFG_NAND_ADDR 0xE0000000
|
||||
#define CFG_BCSR_BASE 0xE1000000
|
||||
#define CFG_BOOT_BASE_ADDR 0xFF000000 /* EBC Boot Space: 0xFF000000 */
|
||||
#define CFG_FLASH_BASE 0xFC000000 /* later mapped to this addr */
|
||||
#define CFG_FLASH_BASE_PHYS_H 0x4
|
||||
#define CFG_FLASH_BASE_PHYS_L 0xCC000000
|
||||
#define CFG_FLASH_BASE_PHYS (((u64)CFG_FLASH_BASE_PHYS_H << 32) | \
|
||||
(u64)CFG_FLASH_BASE_PHYS_L)
|
||||
#define CFG_FLASH_SIZE (64 << 20)
|
||||
|
||||
#define CFG_OCM_BASE 0xE3000000 /* OCM: 16k */
|
||||
#define CFG_SRAM_BASE 0xE8000000 /* SRAM: 256k */
|
||||
#define CFG_LOCAL_CONF_REGS 0xEF000000
|
||||
|
||||
#define CFG_PERIPHERAL_BASE 0xEF600000 /* internal peripherals */
|
||||
|
||||
#define CFG_MONITOR_BASE TEXT_BASE
|
||||
#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */
|
||||
#define CFG_MALLOC_LEN (512 * 1024) /* Reserve 512 kB for malloc()*/
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Initial RAM & stack pointer (placed in OCM)
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */
|
||||
#define CFG_INIT_RAM_END (4 << 10)
|
||||
#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
|
||||
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
||||
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Serial Port
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
#define CONFIG_SERIAL_MULTI 1
|
||||
#undef CONFIG_UART1_CONSOLE /* define this if you want console on UART1 */
|
||||
|
||||
#define CFG_BAUDRATE_TABLE \
|
||||
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Environment
|
||||
*----------------------------------------------------------------------*/
|
||||
/*
|
||||
* Define here the location of the environment variables (FLASH).
|
||||
*/
|
||||
#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
|
||||
#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
|
||||
#define CFG_NAND_CS 3 /* NAND chip connected to CSx */
|
||||
#else
|
||||
#define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
|
||||
#define CFG_NAND_CS 0 /* NAND chip connected to CSx */
|
||||
#endif
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* FLASH related
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CFG_FLASH_CFI /* The flash is CFI compatible */
|
||||
#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
|
||||
#define CFG_FLASH_CFI_AMD_RESET 1 /* Use AMD (Spansion) reset cmd */
|
||||
|
||||
#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE}
|
||||
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
|
||||
#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
|
||||
|
||||
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
|
||||
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
|
||||
|
||||
#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
|
||||
#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
|
||||
|
||||
#ifdef CFG_ENV_IS_IN_FLASH
|
||||
#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
|
||||
#define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SECT_SIZE)
|
||||
#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
|
||||
|
||||
/* Address and size of Redundant Environment Sector */
|
||||
#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR - CFG_ENV_SECT_SIZE)
|
||||
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
|
||||
#endif /* CFG_ENV_IS_IN_FLASH */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* NAND-FLASH related
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CFG_MAX_NAND_DEVICE 1
|
||||
#define NAND_MAX_CHIPS 1
|
||||
#define CFG_NAND_BASE (CFG_NAND_ADDR + CFG_NAND_CS)
|
||||
#define CFG_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */
|
||||
|
||||
/*------------------------------------------------------------------------------
|
||||
* DDR SDRAM
|
||||
*----------------------------------------------------------------------------*/
|
||||
#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */
|
||||
#define SPD_EEPROM_ADDRESS {0x50, 0x51} /* SPD i2c spd addresses*/
|
||||
#define CONFIG_DDR_ECC 1 /* with ECC support */
|
||||
#define CONFIG_DDR_RQDC_FIXED 0x80000038 /* fixed value for RQDC */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* I2C
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
|
||||
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
|
||||
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
|
||||
#define CFG_I2C_SLAVE 0x7F
|
||||
|
||||
#define CFG_I2C_MULTI_EEPROMS
|
||||
#define CFG_I2C_EEPROM_ADDR (0xa8>>1)
|
||||
#define CFG_I2C_EEPROM_ADDR_LEN 1
|
||||
#define CFG_EEPROM_PAGE_WRITE_ENABLE
|
||||
#define CFG_EEPROM_PAGE_WRITE_BITS 3
|
||||
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
|
||||
|
||||
/* I2C SYSMON (LM75, AD7414 is almost compatible) */
|
||||
#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */
|
||||
#define CONFIG_DTT_AD7414 1 /* use AD7414 */
|
||||
#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */
|
||||
#define CFG_DTT_MAX_TEMP 70
|
||||
#define CFG_DTT_LOW_TEMP -30
|
||||
#define CFG_DTT_HYSTERESIS 3
|
||||
|
||||
/* RTC configuration */
|
||||
#define CONFIG_RTC_M41T62 1
|
||||
#define CFG_I2C_RTC_ADDR 0x68
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Ethernet
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CONFIG_IBM_EMAC4_V4 1
|
||||
#define CONFIG_MII 1 /* MII PHY management */
|
||||
#define CONFIG_PHY_ADDR 0 /* PHY address, See schematics */
|
||||
#define CONFIG_PHY1_ADDR 1
|
||||
#define CONFIG_HAS_ETH0 1
|
||||
#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
|
||||
#define CONFIG_NET_MULTI 1
|
||||
|
||||
#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
|
||||
#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
|
||||
#define CONFIG_PHY_DYNAMIC_ANEG 1
|
||||
|
||||
#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
|
||||
|
||||
#define CONFIG_PREBOOT "echo;" \
|
||||
"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
|
||||
"echo"
|
||||
|
||||
#undef CONFIG_BOOTARGS
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"netdev=eth0\0" \
|
||||
"hostname=canyonlands\0" \
|
||||
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
||||
"nfsroot=${serverip}:${rootpath}\0" \
|
||||
"ramargs=setenv bootargs root=/dev/ram rw\0" \
|
||||
"addip=setenv bootargs ${bootargs} " \
|
||||
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
|
||||
":${hostname}:${netdev}:off panic=1\0" \
|
||||
"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
|
||||
"net_nfs=tftp 200000 ${bootfile};" \
|
||||
"run nfsargs addip addtty;" \
|
||||
"bootm 200000\0" \
|
||||
"net_nfs_fdt=tftp 200000 ${bootfile};" \
|
||||
"tftp ${fdt_addr} ${fdt_file};" \
|
||||
"run nfsargs addip addtty;" \
|
||||
"bootm 200000 - ${fdt_addr}\0" \
|
||||
"flash_nfs=run nfsargs addip addtty;" \
|
||||
"bootm ${kernel_addr}\0" \
|
||||
"flash_self=run ramargs addip addtty;" \
|
||||
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
|
||||
"rootpath=/opt/eldk/ppc_4xxFP\0" \
|
||||
"bootfile=canyonlands/uImage\0" \
|
||||
"fdt_file=canyonlands/canyonlands.dtb\0" \
|
||||
"fdt_addr=400000\0" \
|
||||
"kernel_addr=fc000000\0" \
|
||||
"ramdisk_addr=fc200000\0" \
|
||||
"initrd_high=30000000\0" \
|
||||
"load=tftp 200000 canyonlands/u-boot.bin\0" \
|
||||
"update=protect off fffa0000 ffffffff;era fffa0000 ffffffff;" \
|
||||
"cp.b ${fileaddr} fffa0000 ${filesize};" \
|
||||
"setenv filesize;saveenv\0" \
|
||||
"upd=run load update\0" \
|
||||
"nload=tftp 200000 canyonlands/u-boot-nand.bin\0" \
|
||||
"nupdate=nand erase 0 60000;nand write 200000 0 60000;" \
|
||||
"setenv filesize;saveenv\0" \
|
||||
"nupd=run nload nupdate\0" \
|
||||
"pciconfighost=1\0" \
|
||||
"pcie_mode=RP:RP\0" \
|
||||
""
|
||||
#define CONFIG_BOOTCOMMAND "run flash_self"
|
||||
|
||||
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
|
||||
|
||||
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
||||
#define CFG_LOADS_BAUD_CHANGE /* allow baudrate change */
|
||||
|
||||
/*
|
||||
* BOOTP options
|
||||
*/
|
||||
#define CONFIG_BOOTP_BOOTFILESIZE
|
||||
#define CONFIG_BOOTP_BOOTPATH
|
||||
#define CONFIG_BOOTP_GATEWAY
|
||||
#define CONFIG_BOOTP_HOSTNAME
|
||||
#define CONFIG_BOOTP_SUBNETMASK
|
||||
|
||||
/*
|
||||
* Command line configuration.
|
||||
*/
|
||||
#include <config_cmd_default.h>
|
||||
|
||||
#define CONFIG_CMD_ASKENV
|
||||
#define CONFIG_CMD_DATE
|
||||
#define CONFIG_CMD_DHCP
|
||||
#define CONFIG_CMD_DTT
|
||||
#define CONFIG_CMD_DIAG
|
||||
#define CONFIG_CMD_EEPROM
|
||||
#define CONFIG_CMD_ELF
|
||||
#define CONFIG_CMD_FAT
|
||||
#define CONFIG_CMD_I2C
|
||||
#define CONFIG_CMD_IRQ
|
||||
#define CONFIG_CMD_MII
|
||||
#define CONFIG_CMD_NAND
|
||||
#define CONFIG_CMD_NET
|
||||
#define CONFIG_CMD_NFS
|
||||
#define CONFIG_CMD_PCI
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_REGINFO
|
||||
#define CONFIG_CMD_SDRAM
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Miscellaneous configurable options
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CFG_LONGHELP /* undef to save memory */
|
||||
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
|
||||
#if defined(CONFIG_CMD_KGDB)
|
||||
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||
#else
|
||||
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
#endif
|
||||
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
||||
#define CFG_MAXARGS 16 /* max number of command args */
|
||||
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
||||
|
||||
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
|
||||
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
|
||||
|
||||
#define CFG_LOAD_ADDR 0x100000 /* default load address */
|
||||
#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
|
||||
|
||||
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
|
||||
|
||||
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
|
||||
#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
|
||||
#define CONFIG_LOOPW 1 /* enable loopw command */
|
||||
#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
|
||||
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
|
||||
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
|
||||
#define CFG_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/
|
||||
|
||||
#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */
|
||||
#ifdef CFG_HUSH_PARSER
|
||||
#define CFG_PROMPT_HUSH_PS2 "> "
|
||||
#endif
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* PCI stuff
|
||||
*----------------------------------------------------------------------*/
|
||||
/* General PCI */
|
||||
#define CONFIG_PCI /* include pci support */
|
||||
#define CONFIG_PCI_PNP /* do pci plug-and-play */
|
||||
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
|
||||
#define CONFIG_PCI_CONFIG_HOST_BRIDGE
|
||||
|
||||
/* Board-specific PCI */
|
||||
#define CFG_PCI_TARGET_INIT /* let board init pci target */
|
||||
#undef CFG_PCI_MASTER_INIT
|
||||
|
||||
#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
|
||||
#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
|
||||
|
||||
/*
|
||||
* For booting Linux, the board info and command line data
|
||||
* have to be in the first 8 MB of memory, since this is
|
||||
* the maximum mapped by the Linux kernel during initialization.
|
||||
*/
|
||||
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
||||
|
||||
/*
|
||||
* Internal Definitions
|
||||
*/
|
||||
#if defined(CONFIG_CMD_KGDB)
|
||||
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
|
||||
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
|
||||
#endif
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* External Bus Controller (EBC) Setup
|
||||
*----------------------------------------------------------------------*/
|
||||
|
||||
/*
|
||||
* Canyonlands has 64MBytes of NOR FLASH (Spansion 29GL512), but the
|
||||
* boot EBC mapping only supports a maximum of 16MBytes
|
||||
* (4.ff00.0000 - 4.ffff.ffff).
|
||||
* To solve this problem, the FLASH has to get remapped to another
|
||||
* EBC address which accepts bigger regions:
|
||||
*
|
||||
* 0xfc00.0000 -> 4.cc00.0000
|
||||
*
|
||||
* For this we have to remap the CS0 and re-relocate the envrironment,
|
||||
* since the original FLASH location which was needed upon startup is
|
||||
* now not correct anymore.
|
||||
*/
|
||||
|
||||
/* Memory Bank 0 (NOR-FLASH) initialization */
|
||||
#define CFG_EBC_PB0AP 0x10055e00
|
||||
#define CFG_EBC_PB0CR (CFG_BOOT_BASE_ADDR | 0x9a000)
|
||||
|
||||
/* Memory Bank 2 (CPLD) initialization */
|
||||
#define CFG_EBC_PB2AP 0x00804240
|
||||
#define CFG_EBC_PB2CR (CFG_BCSR_BASE | 0x18000) /* BAS=CPLD,BS=1M,BU=RW,BW=32bit */
|
||||
|
||||
/* Memory Bank 3 (NAND-FLASH) initialization */
|
||||
#define CFG_EBC_PB3AP 0x018003c0
|
||||
#define CFG_EBC_PB3CR (CFG_NAND_ADDR | 0x1E000) /* BAS=NAND,BS=1MB,BU=R/W,BW=32bit*/
|
||||
|
||||
#define CFG_EBC_CFG 0xB8400000 /* EBC0_CFG */
|
||||
|
||||
/*
|
||||
* PPC4xx GPIO Configuration
|
||||
*/
|
||||
#define CFG_4xx_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \
|
||||
{ \
|
||||
/* GPIO Core 0 */ \
|
||||
{GPIO0_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO0 GMC1TxD(0) USB2HostD(0) */ \
|
||||
{GPIO0_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO1 GMC1TxD(1) USB2HostD(1) */ \
|
||||
{GPIO0_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO2 GMC1TxD(2) USB2HostD(2) */ \
|
||||
{GPIO0_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO3 GMC1TxD(3) USB2HostD(3) */ \
|
||||
{GPIO0_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO4 GMC1TxD(4) USB2HostD(4) */ \
|
||||
{GPIO0_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO5 GMC1TxD(5) USB2HostD(5) */ \
|
||||
{GPIO0_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO6 GMC1TxD(6) USB2HostD(6) */ \
|
||||
{GPIO0_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO7 GMC1TxD(7) USB2HostD(7) */ \
|
||||
{GPIO0_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO8 GMC1RxD(0) USB2OTGD(0) */ \
|
||||
{GPIO0_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO9 GMC1RxD(1) USB2OTGD(1) */ \
|
||||
{GPIO0_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO10 GMC1RxD(2) USB2OTGD(2) */ \
|
||||
{GPIO0_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO11 GMC1RxD(3) USB2OTGD(3) */ \
|
||||
{GPIO0_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO12 GMC1RxD(4) USB2OTGD(4) */ \
|
||||
{GPIO0_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO13 GMC1RxD(5) USB2OTGD(5) */ \
|
||||
{GPIO0_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO14 GMC1RxD(6) USB2OTGD(6) */ \
|
||||
{GPIO0_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO15 GMC1RxD(7) USB2OTGD(7) */ \
|
||||
{GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_0}, /* GPIO16 GMC1TxER USB2HostStop */ \
|
||||
{GPIO0_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO17 GMC1CD USB2HostNext */ \
|
||||
{GPIO0_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO18 GMC1RxER USB2HostDir */ \
|
||||
{GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_0}, /* GPIO19 GMC1TxEN USB2OTGStop */ \
|
||||
{GPIO0_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO20 GMC1CRS USB2OTGNext */ \
|
||||
{GPIO0_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO21 GMC1RxDV USB2OTGDir */ \
|
||||
{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO22 NFRDY */ \
|
||||
{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO23 NFREN */ \
|
||||
{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO24 NFWEN */ \
|
||||
{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO25 NFCLE */ \
|
||||
{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO26 NFALE */ \
|
||||
{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO27 IRQ(0) */ \
|
||||
{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO28 IRQ(1) */ \
|
||||
{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO29 IRQ(2) */ \
|
||||
{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO30 PerPar0 DMAReq2 IRQ(7)*/ \
|
||||
{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO31 PerPar1 DMAAck2 IRQ(8)*/ \
|
||||
}, \
|
||||
{ \
|
||||
/* GPIO Core 1 */ \
|
||||
{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO32 PerPar2 EOT2/TC2 IRQ(9)*/ \
|
||||
{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO33 PerPar3 DMAReq3 IRQ(4)*/ \
|
||||
{GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_1}, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \
|
||||
{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \
|
||||
{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N DMAAck3 UART3_SIN*/ \
|
||||
{GPIO1_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO37 UART0_RTS_N EOT3/TC3 UART3_SOUT*/ \
|
||||
{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO38 UART0_DTR_N UART1_SOUT */ \
|
||||
{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N UART1_SIN */ \
|
||||
{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 IRQ(3) */ \
|
||||
{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 CS(1) */ \
|
||||
{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 CS(2) */ \
|
||||
{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 CS(3) DMAReq1 IRQ(10)*/ \
|
||||
{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO44 CS(4) DMAAck1 IRQ(11)*/ \
|
||||
{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO45 CS(5) EOT/TC1 IRQ(12)*/ \
|
||||
{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO46 PerAddr(5) DMAReq0 IRQ(13)*/ \
|
||||
{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO47 PerAddr(6) DMAAck0 IRQ(14)*/ \
|
||||
{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO48 PerAddr(7) EOT/TC0 IRQ(15)*/ \
|
||||
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO49 Unselect via TraceSelect Bit */ \
|
||||
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO50 Unselect via TraceSelect Bit */ \
|
||||
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51 Unselect via TraceSelect Bit */ \
|
||||
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52 Unselect via TraceSelect Bit */ \
|
||||
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO53 Unselect via TraceSelect Bit */ \
|
||||
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO54 Unselect via TraceSelect Bit */ \
|
||||
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO55 Unselect via TraceSelect Bit */ \
|
||||
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO56 Unselect via TraceSelect Bit */ \
|
||||
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO57 Unselect via TraceSelect Bit */ \
|
||||
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO58 Unselect via TraceSelect Bit */ \
|
||||
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO59 Unselect via TraceSelect Bit */ \
|
||||
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO60 Unselect via TraceSelect Bit */ \
|
||||
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61 Unselect via TraceSelect Bit */ \
|
||||
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO62 Unselect via TraceSelect Bit */ \
|
||||
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO63 Unselect via TraceSelect Bit */ \
|
||||
} \
|
||||
}
|
||||
|
||||
/* pass open firmware flat tree */
|
||||
#define CONFIG_OF_LIBFDT 1
|
||||
#define CONFIG_OF_BOARD_SETUP 1
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
Loading…
Add table
Reference in a new issue