diff --git a/board/nuvoton/arbel_evb/Kconfig b/board/nuvoton/arbel_evb/Kconfig
index efe85974a2..33c589f1fb 100644
--- a/board/nuvoton/arbel_evb/Kconfig
+++ b/board/nuvoton/arbel_evb/Kconfig
@@ -11,8 +11,8 @@ config SYS_CONFIG_NAME
 
 config SYS_MEM_TOP_HIDE
 	hex "Reserved TOP memory"
-	default 0xB000000
+	default 0x0
 	help
-	  Reserve memory for ECC/GFX/VCD/ECE.
+	  Reserve memory for ECC/GFX/OPTEE/TIP/CP.
 
 endif
diff --git a/configs/arbel_evb_defconfig b/configs/arbel_evb_defconfig
index 29c4c187b5..c27a7cdd3a 100644
--- a/configs/arbel_evb_defconfig
+++ b/configs/arbel_evb_defconfig
@@ -2,7 +2,8 @@ CONFIG_ARM=y
 CONFIG_ARCH_NPCM=y
 CONFIG_SYS_MALLOC_LEN=0x240000
 CONFIG_SYS_MALLOC_F_LEN=0x1000
-CONFIG_NR_DRAM_BANKS=1
+CONFIG_TEXT_BASE=0x06208000
+CONFIG_NR_DRAM_BANKS=2
 CONFIG_ENV_SIZE=0x40000
 CONFIG_ENV_OFFSET=0x3C0000
 CONFIG_ENV_SECT_SIZE=0x1000
@@ -22,6 +23,8 @@ CONFIG_BOOTCOMMAND="run common_bootargs; run romboot"
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_MAXARGS=32
 CONFIG_SYS_BOOTM_LEN=0x1400000
+CONFIG_SYS_LOAD_ADDR=0x06208000
+CONFIG_SYS_INIT_SP_ADDR=0x06208000
 CONFIG_CMD_FUSE=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
@@ -86,3 +89,13 @@ CONFIG_USB_STORAGE=y
 CONFIG_LIB_HW_RAND=y
 CONFIG_SHA_HW_ACCEL=y
 # CONFIG_EFI_LOADER is not set
+CONFIG_TEE=y
+CONFIG_OPTEE=y
+CONFIG_TPM=y
+CONFIG_TPM_V2=y
+CONFIG_TPM2_FTPM_TEE=y
+CONFIG_CMD_TPM=y
+CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_PART=y
diff --git a/include/configs/arbel.h b/include/configs/arbel.h
index 8e27fb52a1..891257bc93 100644
--- a/include/configs/arbel.h
+++ b/include/configs/arbel.h
@@ -7,12 +7,13 @@
 #define __CONFIG_ARBEL_H
 
 #define CFG_SYS_SDRAM_BASE		0x0
-#define CFG_SYS_BOOTMAPSZ		(20 << 20)
+#define CFG_SYS_BOOTMAPSZ		(30 << 20)
+#define CFG_SYS_BOOTM_LEN		(20 << 20)
 #define CFG_SYS_INIT_RAM_ADDR	CFG_SYS_SDRAM_BASE
 #define CFG_SYS_INIT_RAM_SIZE	0x8000
 
 /* Default environemnt variables */
-#define CFG_EXTRA_ENV_SETTINGS   "uimage_flash_addr=80200000\0"   \
+#define CFG_EXTRA_ENV_SETTINGS   "uimage_flash_addr=80400000\0"   \
 		"stdin=serial\0"   \
 		"stdout=serial\0"   \
 		"stderr=serial\0"    \