mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-28 15:41:40 +00:00
board: rockchip: Add Pine64 SOQuartz on CM4-IO
The Pine64 SOQuartz compute module is mostly pin-compatible with the RPi CM4 form factor. Therefore, it can slot into the official Raspberry Pi CM4 IO carrier board. Add this configuration to U-Boot. Features tested with a SOQuartz 4GB v1.1 2022-07-11: - SD-card boot - eMMC boot - USB host Device tree is imported from linux v6.4. Co-developed-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
This commit is contained in:
Jonas Karlman
Kever Yang
parent
d0026e5908
commit
6855fa625c
6 changed files with 290 additions and 0 deletions
|
|
@ -175,6 +175,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3568) += \
|
|||
rk3566-quartz64-b.dtb \
|
||||
rk3566-radxa-cm3-io.dtb \
|
||||
rk3566-soquartz-blade.dtb \
|
||||
rk3566-soquartz-cm4.dtb \
|
||||
rk3566-soquartz-model-a.dtb \
|
||||
rk3568-evb.dtb \
|
||||
rk3568-nanopi-r5c.dtb \
|
||||
|
|
|
|||
3
arch/arm/dts/rk3566-soquartz-cm4-u-boot.dtsi
Normal file
3
arch/arm/dts/rk3566-soquartz-cm4-u-boot.dtsi
Normal file
|
|
@ -0,0 +1,3 @@
|
|||
// SPDX-License-Identifier: GPL-2.0+
|
||||
|
||||
#include "rk3566-soquartz-u-boot.dtsi"
|
||||
192
arch/arm/dts/rk3566-soquartz-cm4.dts
Normal file
192
arch/arm/dts/rk3566-soquartz-cm4.dts
Normal file
|
|
@ -0,0 +1,192 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "rk3566-soquartz.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Pine64 RK3566 SoQuartz with CM4-IO Carrier Board";
|
||||
compatible = "pine64,soquartz-cm4io", "pine64,soquartz", "rockchip,rk3566";
|
||||
|
||||
/* labeled +12v in schematic */
|
||||
vcc12v_dcin: vcc12v-dcin-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc12v_dcin";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
/* labeled +5v in schematic */
|
||||
vcc_5v: vcc-5v-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_5v";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vcc_sd_pwr: vcc-sd-pwr-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_sd_pwr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc3v3_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
/* phy for pcie */
|
||||
&combphy2 {
|
||||
phy-supply = <&vcc3v3_sys>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/*
|
||||
* i2c1 is exposed on CM1 / Module1A
|
||||
* pin 80 - SCL0 - i2c1_scl_m0, pullup to vcc3v3_pmu
|
||||
* pin 82 - SDA0 - i2c1_sda_m0, pullup to vcc3v3_pmu
|
||||
*/
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
|
||||
/*
|
||||
* the rtc interrupt is tied to PMIC_PWRON,
|
||||
* it will force reset the board if triggered.
|
||||
*/
|
||||
pcf85063: rtc@51 {
|
||||
compatible = "nxp,pcf85063";
|
||||
reg = <0x51>;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* i2c2 is exposed on CM1 / Module1A - to PI40
|
||||
* pin 56 - GPIO3 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch
|
||||
* pin 58 - GPIO2 - i2c2_sda_m1, pullup to vcc_3v3
|
||||
*/
|
||||
&i2c2 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/*
|
||||
* i2c3 is exposed on CM1 / Module1A - to PI40
|
||||
* pin 35 - ID_SC(GPIO28) - i2c3_scl_m0, pullup to vcc_3v3
|
||||
* pin 36 - ID_SD(GPIO27) - i2c3_sda_m0, pullup to vcc_3v3
|
||||
*/
|
||||
&i2c3 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/*
|
||||
* i2c4 is exposed on CM2 / Module1B - to PI40
|
||||
* pin 45 - GPIO24 - i2c4_scl_m1
|
||||
* pin 47 - GPIO23 - i2c4_sda_m1
|
||||
*/
|
||||
&i2c4 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/*
|
||||
* i2s1_8ch is exposed on CM1 / Module1A - to PI40
|
||||
* pin 24 - GPIO26 - i2s1_sdi1_m1
|
||||
* pin 25 - GPIO21 - i2s1_sdo0_m1
|
||||
* pin 26 - GPIO19 - i2s1_lrck_tx_m1
|
||||
* pin 27 - GPIO20 - i2s1_sdi0_m1
|
||||
* pin 29 - GPIO16 - i2s1_sdi3_m1
|
||||
* pin 30 - GPIO6 - i2s1_sdi2_m1
|
||||
* pin 40 - GPIO9 - i2s1_sdo1_m1, shared with spi3
|
||||
* pin 41 - GPIO25 - i2s1_sdo2_m1
|
||||
* pin 49 - GPIO18 - i2s1_sclk_tx_m1
|
||||
* pin 50 - GPIO17 - i2s1_mclk_m1
|
||||
* pin 56 - GPIO3 - i2s1_sdo3_m1, shared with i2c2
|
||||
*/
|
||||
&i2s1_8ch {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&led_diy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&led_work {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie2x1 {
|
||||
vpcie3v3-supply = <&vcc_3v3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rgmii_phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/*
|
||||
* saradc is exposed on CM1 / Module1A - to J2
|
||||
* pin 94 - AIN1 - saradc_vin3
|
||||
* pin 96 - AIN0 - saradc_vin2
|
||||
*/
|
||||
&saradc {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&sdmmc0 {
|
||||
vmmc-supply = <&vcc_sd_pwr>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/*
|
||||
* spi3 is exposed on CM1 / Module1A - to PI40
|
||||
* pin 37 - GPIO7 - spi3_cs1_m0
|
||||
* pin 38 - GPIO11 - spi3_clk_m0
|
||||
* pin 39 - GPIO8 - spi3_cs0_m0
|
||||
* pin 40 - GPIO9 - spi3_miso_m0, shared with i2s1_8ch
|
||||
* pin 44 - GPIO10 - spi3_mosi_m0
|
||||
*/
|
||||
&spi3 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/*
|
||||
* uart2 is exposed on CM1 / Module1A - to PI40
|
||||
* pin 51 - GPIO15 - uart2_rx_m0
|
||||
* pin 55 - GPIO14 - uart2_tx_m0
|
||||
*/
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/*
|
||||
* uart7 is exposed on CM1 / Module1A - to PI40
|
||||
* pin 46 - GPIO22 - uart7_tx_m2
|
||||
* pin 47 - GPIO23 - uart7_rx_m2
|
||||
*/
|
||||
&uart7 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_otg {
|
||||
phy-supply = <&vcc_5v>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vbus {
|
||||
vin-supply = <&vcc_5v>;
|
||||
};
|
||||
|
|
@ -7,6 +7,7 @@ F: include/configs/quartz64_rk3566.h
|
|||
F: configs/quartz64-a-rk3566_defconfig
|
||||
F: configs/quartz64-b-rk3566_defconfig
|
||||
F: configs/soquartz-blade-rk3566_defconfig
|
||||
F: configs/soquartz-cm4-rk3566_defconfig
|
||||
F: configs/soquartz-model-a-rk3566_defconfig
|
||||
F: arch/arm/dts/rk3566-quartz64-a.dts
|
||||
F: arch/arm/dts/rk3566-quartz64-a-u-boot.dtsi
|
||||
|
|
@ -16,5 +17,7 @@ F: arch/arm/dts/rk3566-soquartz.dtsi
|
|||
F: arch/arm/dts/rk3566-soquartz-u-boot.dtsi
|
||||
F: arch/arm/dts/rk3566-soquartz-blade.dts
|
||||
F: arch/arm/dts/rk3566-soquartz-blade-u-boot.dtsi
|
||||
F: arch/arm/dts/rk3566-soquartz-cm4.dts
|
||||
F: arch/arm/dts/rk3566-soquartz-cm4-u-boot.dtsi
|
||||
F: arch/arm/dts/rk3566-soquartz-model-a.dts
|
||||
F: arch/arm/dts/rk3566-soquartz-model-a-u-boot.dtsi
|
||||
|
|
|
|||
90
configs/soquartz-cm4-rk3566_defconfig
Normal file
90
configs/soquartz-cm4-rk3566_defconfig
Normal file
|
|
@ -0,0 +1,90 @@
|
|||
CONFIG_ARM=y
|
||||
CONFIG_SKIP_LOWLEVEL_INIT=y
|
||||
CONFIG_COUNTER_FREQUENCY=24000000
|
||||
CONFIG_ARCH_ROCKCHIP=y
|
||||
CONFIG_TEXT_BASE=0x00a00000
|
||||
CONFIG_SPL_LIBCOMMON_SUPPORT=y
|
||||
CONFIG_SPL_LIBGENERIC_SUPPORT=y
|
||||
CONFIG_NR_DRAM_BANKS=2
|
||||
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
|
||||
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
|
||||
CONFIG_DEFAULT_DEVICE_TREE="rk3566-soquartz-cm4"
|
||||
CONFIG_ROCKCHIP_RK3568=y
|
||||
CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
|
||||
CONFIG_SPL_SERIAL=y
|
||||
CONFIG_SPL_STACK_R_ADDR=0x600000
|
||||
CONFIG_TARGET_QUARTZ64_RK3566=y
|
||||
CONFIG_SPL_STACK=0x400000
|
||||
CONFIG_DEBUG_UART_BASE=0xFE660000
|
||||
CONFIG_DEBUG_UART_CLOCK=24000000
|
||||
CONFIG_SYS_LOAD_ADDR=0xc00800
|
||||
CONFIG_PCI=y
|
||||
CONFIG_DEBUG_UART=y
|
||||
CONFIG_AHCI=y
|
||||
CONFIG_FIT=y
|
||||
CONFIG_FIT_VERBOSE=y
|
||||
CONFIG_SPL_FIT_SIGNATURE=y
|
||||
CONFIG_SPL_LOAD_FIT=y
|
||||
CONFIG_LEGACY_IMAGE_FORMAT=y
|
||||
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-soquartz-cm4.dtb"
|
||||
# CONFIG_DISPLAY_CPUINFO is not set
|
||||
CONFIG_DISPLAY_BOARDINFO_LATE=y
|
||||
CONFIG_SPL_MAX_SIZE=0x40000
|
||||
CONFIG_SPL_PAD_TO=0x7f8000
|
||||
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
|
||||
CONFIG_SPL_BSS_START_ADDR=0x4000000
|
||||
CONFIG_SPL_BSS_MAX_SIZE=0x4000
|
||||
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
|
||||
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
|
||||
CONFIG_SPL_STACK_R=y
|
||||
CONFIG_SPL_ATF=y
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_CMD_GPT=y
|
||||
CONFIG_CMD_I2C=y
|
||||
CONFIG_CMD_MMC=y
|
||||
CONFIG_CMD_PCI=y
|
||||
CONFIG_CMD_USB=y
|
||||
# CONFIG_CMD_SETEXPR is not set
|
||||
CONFIG_CMD_PMIC=y
|
||||
CONFIG_CMD_REGULATOR=y
|
||||
# CONFIG_SPL_DOS_PARTITION is not set
|
||||
CONFIG_SPL_OF_CONTROL=y
|
||||
CONFIG_OF_LIVE=y
|
||||
CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
|
||||
CONFIG_SPL_DM_SEQ_ALIAS=y
|
||||
CONFIG_SPL_REGMAP=y
|
||||
CONFIG_SPL_SYSCON=y
|
||||
CONFIG_SCSI_AHCI=y
|
||||
CONFIG_AHCI_PCI=y
|
||||
CONFIG_SPL_CLK=y
|
||||
CONFIG_GPIO_HOG=y
|
||||
CONFIG_ROCKCHIP_GPIO=y
|
||||
CONFIG_SYS_I2C_ROCKCHIP=y
|
||||
CONFIG_MISC=y
|
||||
CONFIG_SUPPORT_EMMC_RPMB=y
|
||||
CONFIG_MMC_DW=y
|
||||
CONFIG_MMC_DW_ROCKCHIP=y
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_SDMA=y
|
||||
CONFIG_MMC_SDHCI_ROCKCHIP=y
|
||||
CONFIG_NVME_PCI=y
|
||||
CONFIG_PCIE_DW_ROCKCHIP=y
|
||||
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
|
||||
CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
|
||||
CONFIG_SPL_PINCTRL=y
|
||||
CONFIG_DM_PMIC=y
|
||||
CONFIG_PMIC_RK8XX=y
|
||||
CONFIG_REGULATOR_RK8XX=y
|
||||
CONFIG_PWM_ROCKCHIP=y
|
||||
CONFIG_SPL_RAM=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_DM_SCSI=y
|
||||
CONFIG_BAUDRATE=1500000
|
||||
CONFIG_DEBUG_UART_SHIFT=2
|
||||
CONFIG_SYS_NS16550_MEM32=y
|
||||
CONFIG_SYSRESET=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_XHCI_HCD=y
|
||||
CONFIG_USB_DWC3=y
|
||||
CONFIG_USB_DWC3_GENERIC=y
|
||||
CONFIG_ERRNO_STR=y
|
||||
|
|
@ -99,6 +99,7 @@ List of mainline supported Rockchip boards:
|
|||
- Pine64 Quartz64-A Board (quartz64-a-rk3566_defconfig)
|
||||
- Pine64 Quartz64-B Board (quartz64-b-rk3566_defconfig)
|
||||
- Pine64 SOQuartz on Blade (soquartz-blade-rk3566_defconfig)
|
||||
- Pine64 SOQuartz on CM4-IO (soquartz-cm4-rk3566_defconfig)
|
||||
- Pine64 SOQuartz on Model A (soquartz-model-a-rk3566_defconfig)
|
||||
|
||||
* rk3588
|
||||
|
|
|
|||
Loading…
Reference in a new issue