Merge branch '2021-10-01-assorted-removal-and-migration' into next

- Remove the last non-CONFIG_DM boards, and their related unused code. - Finish a few partial migrations to Kconfig, and remove some redundant serial related code.
2024-11-17 10:18:38 +00:00 · 2021-10-02 15:47:28 -04:00 · 2021-10-02 15:47:28 -04:00 · 67e6c540a0
commit 67e6c540a0
parent 570320da3b 561d1d3fba
143 changed files with 59 additions and 9150 deletions
--- a/5
+++ b/5
@ -647,11 +647,6 @@ The following options need to be configured:
 		time on others. This setting #define's the initial
 		value of the "loads_echo" environment variable.

- Kgdb Serial Baudrate: (if CONFIG_CMD_KGDB is defined)
-		CONFIG_KGDB_BAUDRATE
-		Select one of the baudrates listed in
-		CONFIG_SYS_BAUDRATE_TABLE, see below.
-
 - Removal of commands
 		If no commands are needed to boot, you can disable
 		CONFIG_CMDLINE to remove them. In this case, the command line
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@ -551,11 +551,6 @@ config ARCH_AT91
 	select SPL_BOARD_INIT if SPL && !TARGET_SMARTWEB
 	select SPL_SEPARATE_BSS if SPL

-config TARGET_ASPENITE
-	bool "Support aspenite"
-	select CPU_ARM926EJS
-	select GPIO_EXTRA_HEADER
-
 config ARCH_DAVINCI
 	bool "TI DaVinci"
 	select CPU_ARM926EJS
@ -605,11 +600,6 @@ config TARGET_STV0991
 	select SPI_FLASH
 	imply CMD_DM

-config TARGET_FLEA3
-	bool "Support flea3"
-	select CPU_ARM1136
-	select GPIO_EXTRA_HEADER
-
 config ARCH_BCM283X
 	bool "Broadcom BCM283X family"
 	select DM
@ -864,13 +854,6 @@ config ARCH_MX23
 	select PL011_SERIAL
 	select SUPPORT_SPL

-config ARCH_MX25
-	bool "NXP MX25"
-	select CPU_ARM926EJS
-	select GPIO_EXTRA_HEADER
-	select MACH_IMX
-	imply MXC_GPIO
-
 config ARCH_MX28
 	bool "NXP i.MX28 family"
 	select CPU_ARM926EJS
@ -2067,8 +2050,6 @@ source "arch/arm/mach-octeontx2/Kconfig"

 source "arch/arm/cpu/armv7/ls102xa/Kconfig"

-source "arch/arm/mach-imx/mx2/Kconfig"
-
 source "arch/arm/mach-imx/mx3/Kconfig"

 source "arch/arm/mach-imx/mx5/Kconfig"
@ -2149,8 +2130,6 @@ source "board/armltd/total_compute/Kconfig"

 source "board/bosch/shc/Kconfig"
 source "board/bosch/guardian/Kconfig"
-source "board/CarMediaLab/flea3/Kconfig"
-source "board/Marvell/aspenite/Kconfig"
 source "board/Marvell/octeontx/Kconfig"
 source "board/Marvell/octeontx2/Kconfig"
 source "board/armltd/vexpress/Kconfig"
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@ -111,7 +111,7 @@ libs-y += arch/arm/cpu/
 libs-y += arch/arm/lib/

 ifeq ($(CONFIG_SPL_BUILD),y)
-ifneq (,$(CONFIG_MX23)$(CONFIG_MX28)$(CONFIG_MX35)$(filter $(SOC), mx25 mx5 mx6 mx7 mx35 imx8m imx8 imx8ulp imxrt))
+ifneq (,$(CONFIG_MX23)$(CONFIG_MX28)$(filter $(SOC), mx25 mx5 mx6 mx7 mx35 imx8m imx8 imx8ulp imxrt))
 libs-y += arch/arm/mach-imx/
 endif
 else
--- a/arch/arm/cpu/arm1136/Makefile
+++ b/arch/arm/cpu/arm1136/Makefile
@ -7,4 +7,3 @@ extra-y	= start.o

 obj-y += ../arm11/
 obj-$(CONFIG_MX31) += mx31/
-obj-$(CONFIG_MX35) += mx35/
--- a/arch/arm/cpu/arm1136/mx35/Makefile
+++ b/arch/arm/cpu/arm1136/mx35/Makefile
@ -1,11 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
-
-obj-y	+= generic.o
-obj-y	+= timer.o
-obj-y	+= mx35_sdram.o
-obj-y	+= relocate.o
--- a/arch/arm/cpu/arm1136/mx35/generic.c
+++ b/arch/arm/cpu/arm1136/mx35/generic.c
@ -1,530 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2007
- * Sascha Hauer, Pengutronix
- *
- * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <clock_legacy.h>
-#include <command.h>
-#include <div64.h>
-#include <init.h>
-#include <net.h>
-#include <asm/global_data.h>
-#include <asm/io.h>
-#include <linux/errno.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/crm_regs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sys_proto.h>
-#ifdef CONFIG_FSL_ESDHC_IMX
-#include <fsl_esdhc_imx.h>
-#endif
-#include <netdev.h>
-#include <spl.h>
-
-#define CLK_CODE(arm, ahb, sel) (((arm) << 16) + ((ahb) << 8) + (sel))
-#define CLK_CODE_ARM(c)		(((c) >> 16) & 0xFF)
-#define CLK_CODE_AHB(c)		(((c) >>  8) & 0xFF)
-#define CLK_CODE_PATH(c)	((c) & 0xFF)
-
-#define CCM_GET_DIVIDER(x, m, o) (((x) & (m)) >> (o))
-
-#ifdef CONFIG_FSL_ESDHC_IMX
-DECLARE_GLOBAL_DATA_PTR;
-#endif
-
-static int g_clk_mux_auto[8] = {
-	CLK_CODE(1, 3, 0), CLK_CODE(1, 2, 1), CLK_CODE(2, 1, 1), -1,
-	CLK_CODE(1, 6, 0), CLK_CODE(1, 4, 1), CLK_CODE(2, 2, 1), -1,
-};
-
-static int g_clk_mux_consumer[16] = {
-	CLK_CODE(1, 4, 0), CLK_CODE(1, 3, 1), CLK_CODE(1, 3, 1), -1,
-	-1, -1, CLK_CODE(4, 1, 0), CLK_CODE(1, 5, 0),
-	CLK_CODE(1, 8, 1), CLK_CODE(1, 6, 1), CLK_CODE(2, 4, 0), -1,
-	-1, -1, CLK_CODE(4, 2, 0), -1,
-};
-
-static int hsp_div_table[3][16] = {
-	{4, 3, 2, -1, -1, -1, 1, 5, 4, 3, 2, -1, -1, -1, 1, -1},
-	{-1, -1, -1, -1, -1, -1, -1, -1, 8, 6, 4, -1, -1, -1, 2, -1},
-	{3, -1, -1, -1, -1, -1, -1, -1, 3, -1, -1, -1, -1, -1, -1, -1},
-};
-
-u32 get_cpu_rev(void)
-{
-	int reg;
-	struct iim_regs *iim =
-		(struct iim_regs *)IIM_BASE_ADDR;
-	reg = readl(&iim->iim_srev);
-	if (!reg) {
-		reg = readw(ROMPATCH_REV);
-		reg <<= 4;
-	} else {
-		reg += CHIP_REV_1_0;
-	}
-
-	return 0x35000 + (reg & 0xFF);
-}
-
-static u32 get_arm_div(u32 pdr0, u32 *fi, u32 *fd)
-{
-	int *pclk_mux;
-	if (pdr0 & MXC_CCM_PDR0_AUTO_CON) {
-		pclk_mux = g_clk_mux_consumer +
-			((pdr0 & MXC_CCM_PDR0_CON_MUX_DIV_MASK) >>
-			MXC_CCM_PDR0_CON_MUX_DIV_OFFSET);
-	} else {
-		pclk_mux = g_clk_mux_auto +
-			((pdr0 & MXC_CCM_PDR0_AUTO_MUX_DIV_MASK) >>
-			MXC_CCM_PDR0_AUTO_MUX_DIV_OFFSET);
-	}
-
-	if ((*pclk_mux) == -1)
-		return -1;
-
-	if (fi && fd) {
-		if (!CLK_CODE_PATH(*pclk_mux)) {
-			*fi = *fd = 1;
-			return CLK_CODE_ARM(*pclk_mux);
-		}
-		if (pdr0 & MXC_CCM_PDR0_AUTO_CON) {
-			*fi = 3;
-			*fd = 4;
-		} else {
-			*fi = 2;
-			*fd = 3;
-		}
-	}
-	return CLK_CODE_ARM(*pclk_mux);
-}
-
-static int get_ahb_div(u32 pdr0)
-{
-	int *pclk_mux;
-
-	pclk_mux = g_clk_mux_consumer +
-		((pdr0 & MXC_CCM_PDR0_CON_MUX_DIV_MASK) >>
-		MXC_CCM_PDR0_CON_MUX_DIV_OFFSET);
-
-	if ((*pclk_mux) == -1)
-		return -1;
-
-	return CLK_CODE_AHB(*pclk_mux);
-}
-
-static u32 decode_pll(u32 reg, u32 infreq)
-{
-	u32 mfi = (reg >> 10) & 0xf;
-	s32 mfn = reg & 0x3ff;
-	u32 mfd = (reg >> 16) & 0x3ff;
-	u32 pd = (reg >> 26) & 0xf;
-
-	mfi = mfi <= 5 ? 5 : mfi;
-	mfn = mfn >= 512 ? mfn - 1024 : mfn;
-	mfd += 1;
-	pd += 1;
-
-	return lldiv(2 * (u64)infreq * (mfi * mfd + mfn),
-		mfd * pd);
-}
-
-static u32 get_mcu_main_clk(void)
-{
-	u32 arm_div = 0, fi = 0, fd = 0;
-	struct ccm_regs *ccm =
-		(struct ccm_regs *)IMX_CCM_BASE;
-	arm_div = get_arm_div(readl(&ccm->pdr0), &fi, &fd);
-	fi *= decode_pll(readl(&ccm->mpctl), MXC_HCLK);
-	return fi / (arm_div * fd);
-}
-
-static u32 get_ipg_clk(void)
-{
-	u32 freq = get_mcu_main_clk();
-	struct ccm_regs *ccm =
-		(struct ccm_regs *)IMX_CCM_BASE;
-	u32 pdr0 = readl(&ccm->pdr0);
-
-	return freq / (get_ahb_div(pdr0) * 2);
-}
-
-static u32 get_ipg_per_clk(void)
-{
-	u32 freq = get_mcu_main_clk();
-	struct ccm_regs *ccm =
-		(struct ccm_regs *)IMX_CCM_BASE;
-	u32 pdr0 = readl(&ccm->pdr0);
-	u32 pdr4 = readl(&ccm->pdr4);
-	u32 div;
-	if (pdr0 & MXC_CCM_PDR0_PER_SEL) {
-		div = CCM_GET_DIVIDER(pdr4,
-			MXC_CCM_PDR4_PER0_PODF_MASK,
-			MXC_CCM_PDR4_PER0_PODF_OFFSET) + 1;
-	} else {
-		div = CCM_GET_DIVIDER(pdr0,
-			MXC_CCM_PDR0_PER_PODF_MASK,
-			MXC_CCM_PDR0_PER_PODF_OFFSET) + 1;
-		div *= get_ahb_div(pdr0);
-	}
-	return freq / div;
-}
-
-u32 imx_get_uartclk(void)
-{
-	u32 freq;
-	struct ccm_regs *ccm =
-		(struct ccm_regs *)IMX_CCM_BASE;
-	u32 pdr4 = readl(&ccm->pdr4);
-
-	if (readl(&ccm->pdr3) & MXC_CCM_PDR3_UART_M_U)
-		freq = get_mcu_main_clk();
-	else
-		freq = decode_pll(readl(&ccm->ppctl), MXC_HCLK);
-	freq /= CCM_GET_DIVIDER(pdr4,
-			MXC_CCM_PDR4_UART_PODF_MASK,
-			MXC_CCM_PDR4_UART_PODF_OFFSET) + 1;
-	return freq;
-}
-
-unsigned int mxc_get_main_clock(enum mxc_main_clock clk)
-{
-	u32 nfc_pdf, hsp_podf;
-	u32 pll, ret_val = 0, usb_podf;
-	struct ccm_regs *ccm =
-		(struct ccm_regs *)IMX_CCM_BASE;
-
-	u32 reg = readl(&ccm->pdr0);
-	u32 reg4 = readl(&ccm->pdr4);
-
-	reg |= 0x1;
-
-	switch (clk) {
-	case CPU_CLK:
-		ret_val = get_mcu_main_clk();
-		break;
-	case AHB_CLK:
-		ret_val = get_mcu_main_clk();
-		break;
-	case HSP_CLK:
-		if (reg & CLKMODE_CONSUMER) {
-			hsp_podf = (reg >> 20) & 0x3;
-			pll = get_mcu_main_clk();
-			hsp_podf = hsp_div_table[hsp_podf][(reg>>16)&0xF];
-			if (hsp_podf > 0) {
-				ret_val = pll / hsp_podf;
-			} else {
-				puts("mismatch HSP with ARM clock setting\n");
-				ret_val = 0;
-			}
-		} else {
-			ret_val = get_mcu_main_clk();
-		}
-		break;
-	case IPG_CLK:
-		ret_val = get_ipg_clk();
-		break;
-	case IPG_PER_CLK:
-		ret_val = get_ipg_per_clk();
-		break;
-	case NFC_CLK:
-		nfc_pdf = (reg4 >> 28) & 0xF;
-		pll = get_mcu_main_clk();
-		/* AHB/nfc_pdf */
-		ret_val = pll / (nfc_pdf + 1);
-		break;
-	case USB_CLK:
-		usb_podf = (reg4 >> 22) & 0x3F;
-		if (reg4 & 0x200)
-			pll = get_mcu_main_clk();
-		else
-			pll = decode_pll(readl(&ccm->ppctl), MXC_HCLK);
-
-		ret_val = pll / (usb_podf + 1);
-		break;
-	default:
-		printf("Unknown clock: %d\n", clk);
-		break;
-	}
-
-	return ret_val;
-}
-unsigned int mxc_get_peri_clock(enum mxc_peri_clock clk)
-{
-	u32 ret_val = 0, pdf, pre_pdf, clk_sel;
-	struct ccm_regs *ccm =
-		(struct ccm_regs *)IMX_CCM_BASE;
-	u32 mpdr2 = readl(&ccm->pdr2);
-	u32 mpdr3 = readl(&ccm->pdr3);
-	u32 mpdr4 = readl(&ccm->pdr4);
-
-	switch (clk) {
-	case UART1_BAUD:
-	case UART2_BAUD:
-	case UART3_BAUD:
-		clk_sel = mpdr3 & (1 << 14);
-		pdf = (mpdr4 >> 10) & 0x3F;
-		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
-			decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / (pdf + 1);
-		break;
-	case SSI1_BAUD:
-		pre_pdf = (mpdr2 >> 24) & 0x7;
-		pdf = mpdr2 & 0x3F;
-		clk_sel = mpdr2 & (1 << 6);
-		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
-			decode_pll(readl(&ccm->ppctl), MXC_HCLK)) /
-				((pre_pdf + 1) * (pdf + 1));
-		break;
-	case SSI2_BAUD:
-		pre_pdf = (mpdr2 >> 27) & 0x7;
-		pdf = (mpdr2 >> 8) & 0x3F;
-		clk_sel = mpdr2 & (1 << 6);
-		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
-			decode_pll(readl(&ccm->ppctl), MXC_HCLK)) /
-				((pre_pdf + 1) * (pdf + 1));
-		break;
-	case CSI_BAUD:
-		clk_sel = mpdr2 & (1 << 7);
-		pdf = (mpdr2 >> 16) & 0x3F;
-		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
-			decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / (pdf + 1);
-		break;
-	case MSHC_CLK:
-		pre_pdf = readl(&ccm->pdr1);
-		clk_sel = (pre_pdf & 0x80);
-		pdf = (pre_pdf >> 22) & 0x3F;
-		pre_pdf = (pre_pdf >> 28) & 0x7;
-		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
-			decode_pll(readl(&ccm->ppctl), MXC_HCLK)) /
-				((pre_pdf + 1) * (pdf + 1));
-		break;
-	case ESDHC1_CLK:
-		clk_sel = mpdr3 & 0x40;
-		pdf = mpdr3 & 0x3F;
-		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
-			decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / (pdf + 1);
-		break;
-	case ESDHC2_CLK:
-		clk_sel = mpdr3 & 0x40;
-		pdf = (mpdr3 >> 8) & 0x3F;
-		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
-			decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / (pdf + 1);
-		break;
-	case ESDHC3_CLK:
-		clk_sel = mpdr3 & 0x40;
-		pdf = (mpdr3 >> 16) & 0x3F;
-		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
-			decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / (pdf + 1);
-		break;
-	case SPDIF_CLK:
-		clk_sel = mpdr3 & 0x400000;
-		pre_pdf = (mpdr3 >> 29) & 0x7;
-		pdf = (mpdr3 >> 23) & 0x3F;
-		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
-			decode_pll(readl(&ccm->ppctl), MXC_HCLK)) /
-				((pre_pdf + 1) * (pdf + 1));
-		break;
-	default:
-		printf("%s(): This clock: %d not supported yet\n",
-				__func__, clk);
-		break;
-	}
-
-	return ret_val;
-}
-
-unsigned int mxc_get_clock(enum mxc_clock clk)
-{
-	switch (clk) {
-	case MXC_ARM_CLK:
-		return get_mcu_main_clk();
-	case MXC_AHB_CLK:
-		break;
-	case MXC_IPG_CLK:
-		return get_ipg_clk();
-	case MXC_IPG_PERCLK:
-	case MXC_I2C_CLK:
-		return get_ipg_per_clk();
-	case MXC_UART_CLK:
-		return imx_get_uartclk();
-	case MXC_ESDHC1_CLK:
-		return mxc_get_peri_clock(ESDHC1_CLK);
-	case MXC_ESDHC2_CLK:
-		return mxc_get_peri_clock(ESDHC2_CLK);
-	case MXC_ESDHC3_CLK:
-		return mxc_get_peri_clock(ESDHC3_CLK);
-	case MXC_USB_CLK:
-		return mxc_get_main_clock(USB_CLK);
-	case MXC_FEC_CLK:
-		return get_ipg_clk();
-	case MXC_CSPI_CLK:
-		return get_ipg_clk();
-	}
-	return -1;
-}
-
-#ifdef CONFIG_FEC_MXC
-/*
- * The MX35 has no fuse for MAC, return a NULL MAC
- */
-void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
-{
-	memset(mac, 0, 6);
-}
-
-u32 imx_get_fecclk(void)
-{
-	return mxc_get_clock(MXC_IPG_CLK);
-}
-#endif
-
-int do_mx35_showclocks(struct cmd_tbl *cmdtp, int flag, int argc,
-		       char *const argv[])
-{
-	u32 cpufreq = get_mcu_main_clk();
-	printf("mx35 cpu clock: %dMHz\n", cpufreq / 1000000);
-	printf("ipg clock     : %dHz\n", get_ipg_clk());
-	printf("ipg per clock : %dHz\n", get_ipg_per_clk());
-	printf("uart clock    : %dHz\n", mxc_get_clock(MXC_UART_CLK));
-
-	return 0;
-}
-
-U_BOOT_CMD(
-	clocks,	CONFIG_SYS_MAXARGS, 1, do_mx35_showclocks,
-	"display clocks",
-	""
-);
-
-#if defined(CONFIG_DISPLAY_CPUINFO)
-static char *get_reset_cause(void)
-{
-	/* read RCSR register from CCM module */
-	struct ccm_regs *ccm =
-		(struct ccm_regs *)IMX_CCM_BASE;
-
-	u32 cause = readl(&ccm->rcsr) & 0x0F;
-
-	switch (cause) {
-	case 0x0000:
-		return "POR";
-	case 0x0002:
-		return "JTAG";
-	case 0x0004:
-		return "RST";
-	case 0x0008:
-		return "WDOG";
-	default:
-		return "unknown reset";
-	}
-}
-
-int print_cpuinfo(void)
-{
-	u32 srev = get_cpu_rev();
-
-	printf("CPU:   Freescale i.MX35 rev %d.%d at %d MHz.\n",
-		(srev & 0xF0) >> 4, (srev & 0x0F),
-		get_mcu_main_clk() / 1000000);
-
-	printf("Reset cause: %s\n", get_reset_cause());
-
-	return 0;
-}
-#endif
-
-/*
- * Initializes on-chip ethernet controllers.
- * to override, implement board_eth_init()
- */
-int cpu_eth_init(struct bd_info *bis)
-{
-	int rc = -ENODEV;
-
-#if defined(CONFIG_FEC_MXC)
-	rc = fecmxc_initialize(bis);
-#endif
-
-	return rc;
-}
-
-#ifdef CONFIG_FSL_ESDHC_IMX
-/*
- * Initializes on-chip MMC controllers.
- * to override, implement board_mmc_init()
- */
-int cpu_mmc_init(struct bd_info *bis)
-{
-	return fsl_esdhc_mmc_init(bis);
-}
-#endif
-
-int get_clocks(void)
-{
-#ifdef CONFIG_FSL_ESDHC_IMX
-#if CONFIG_SYS_FSL_ESDHC_ADDR == MMC_SDHC2_BASE_ADDR
-	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
-#elif CONFIG_SYS_FSL_ESDHC_ADDR == MMC_SDHC3_BASE_ADDR
-	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
-#else
-	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK);
-#endif
-#endif
-	return 0;
-}
-
-#define RCSR_MEM_CTL_WEIM	0
-#define RCSR_MEM_CTL_NAND	1
-#define RCSR_MEM_CTL_ATA	2
-#define RCSR_MEM_CTL_EXPANSION	3
-#define RCSR_MEM_TYPE_NOR	0
-#define RCSR_MEM_TYPE_ONENAND	2
-#define RCSR_MEM_TYPE_SD	0
-#define RCSR_MEM_TYPE_I2C	2
-#define RCSR_MEM_TYPE_SPI	3
-
-u32 spl_boot_device(void)
-{
-	struct ccm_regs *ccm =
-		(struct ccm_regs *)IMX_CCM_BASE;
-
-	u32 rcsr = readl(&ccm->rcsr);
-	u32 mem_type, mem_ctl;
-
-	/* In external mode, no boot device is returned */
-	if ((rcsr >> 10) & 0x03)
-		return BOOT_DEVICE_NONE;
-
-	mem_ctl = (rcsr >> 25) & 0x03;
-	mem_type = (rcsr >> 23) & 0x03;
-
-	switch (mem_ctl) {
-	case RCSR_MEM_CTL_WEIM:
-		switch (mem_type) {
-		case RCSR_MEM_TYPE_NOR:
-			return BOOT_DEVICE_NOR;
-		case RCSR_MEM_TYPE_ONENAND:
-			return BOOT_DEVICE_ONENAND;
-		default:
-			return BOOT_DEVICE_NONE;
-		}
-	case RCSR_MEM_CTL_NAND:
-		return BOOT_DEVICE_NAND;
-	case RCSR_MEM_CTL_EXPANSION:
-		switch (mem_type) {
-		case RCSR_MEM_TYPE_SD:
-			return BOOT_DEVICE_MMC1;
-		case RCSR_MEM_TYPE_I2C:
-			return BOOT_DEVICE_I2C;
-		case RCSR_MEM_TYPE_SPI:
-			return BOOT_DEVICE_SPI;
-		default:
-			return BOOT_DEVICE_NONE;
-		}
-	}
-
-	return BOOT_DEVICE_NONE;
-}
--- a/arch/arm/cpu/arm1136/mx35/mx35_sdram.c
+++ b/arch/arm/cpu/arm1136/mx35/mx35_sdram.c
@ -1,120 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2012, Stefano Babic <sbabic@denx.de>
- */
-
-#include <asm/io.h>
-#include <linux/errno.h>
-#include <asm/arch/imx-regs.h>
-#include <linux/types.h>
-#include <asm/arch/sys_proto.h>
-
-#define ESDCTL_DDR2_EMR2	0x04000000
-#define ESDCTL_DDR2_EMR3	0x06000000
-#define ESDCTL_PRECHARGE	0x00000400
-#define ESDCTL_DDR2_EN_DLL	0x02000400
-#define ESDCTL_DDR2_RESET_DLL	0x00000333
-#define ESDCTL_DDR2_MR		0x00000233
-#define ESDCTL_DDR2_OCD_DEFAULT 0x02000780
-
-enum {
-	SMODE_NORMAL =	0,
-	SMODE_PRECHARGE,
-	SMODE_AUTO_REFRESH,
-	SMODE_LOAD_REG,
-	SMODE_MANUAL_REFRESH
-};
-
-#define set_mode(x, en, m)	(x | (en << 31) | (m << 28))
-
-static inline void dram_wait(unsigned int count)
-{
-	volatile unsigned int wait = count;
-
-	while (wait--)
-		;
-
-}
-
-void mx3_setup_sdram_bank(u32 start_address, u32 ddr2_config,
-	u32 row, u32 col, u32 dsize, u32 refresh)
-{
-	struct esdc_regs *esdc = (struct esdc_regs *)ESDCTL_BASE_ADDR;
-	u32 *cfg_reg, *ctl_reg;
-	u32 val;
-	u32 ctlval;
-
-	switch (start_address) {
-	case CSD0_BASE_ADDR:
-		cfg_reg = &esdc->esdcfg0;
-		ctl_reg = &esdc->esdctl0;
-		break;
-	case CSD1_BASE_ADDR:
-		cfg_reg = &esdc->esdcfg1;
-		ctl_reg = &esdc->esdctl1;
-		break;
-	default:
-		return;
-	}
-
-	/* The MX35 supports 11 up to 14 rows */
-	if (row < 11 || row > 14 || col < 8 || col > 10)
-		return;
-	ctlval = (row - 11) << 24 | (col - 8) << 20 | (dsize << 16);
-
-	/* Initialize MISC register for DDR2 */
-	val = ESDC_MISC_RST | ESDC_MISC_MDDR_EN | ESDC_MISC_MDDR_DL_RST |
-		ESDC_MISC_DDR_EN | ESDC_MISC_DDR2_EN;
-	writel(val, &esdc->esdmisc);
-	val &= ~(ESDC_MISC_RST | ESDC_MISC_MDDR_DL_RST);
-	writel(val, &esdc->esdmisc);
-
-	/*
-	 * according to DDR2 specs, wait a while before
-	 * the PRECHARGE_ALL command
-	 */
-	dram_wait(0x20000);
-
-	/* Load DDR2 config and timing */
-	writel(ddr2_config, cfg_reg);
-
-	/* Precharge ALL */
-	writel(set_mode(ctlval, 1, SMODE_PRECHARGE),
-		ctl_reg);
-	writel(0xda, start_address + ESDCTL_PRECHARGE);
-
-	/* Load mode */
-	writel(set_mode(ctlval, 1, SMODE_LOAD_REG),
-		ctl_reg);
-	writeb(0xda, start_address + ESDCTL_DDR2_EMR2); /* EMRS2 */
-	writeb(0xda, start_address + ESDCTL_DDR2_EMR3); /* EMRS3 */
-	writeb(0xda, start_address + ESDCTL_DDR2_EN_DLL); /* Enable DLL */
-	writeb(0xda, start_address + ESDCTL_DDR2_RESET_DLL); /* Reset DLL */
-
-	/* Precharge ALL */
-	writel(set_mode(ctlval, 1, SMODE_PRECHARGE),
-		ctl_reg);
-	writel(0xda, start_address + ESDCTL_PRECHARGE);
-
-	/* Set mode auto refresh : at least two refresh are required */
-	writel(set_mode(ctlval, 1, SMODE_AUTO_REFRESH),
-		ctl_reg);
-	writel(0xda, start_address);
-	writel(0xda, start_address);
-
-	writel(set_mode(ctlval, 1, SMODE_LOAD_REG),
-		ctl_reg);
-	writeb(0xda, start_address + ESDCTL_DDR2_MR);
-	writeb(0xda, start_address + ESDCTL_DDR2_OCD_DEFAULT);
-
-	/* OCD mode exit */
-	writeb(0xda, start_address + ESDCTL_DDR2_EN_DLL); /* Enable DLL */
-
-	/* Set normal mode */
-	writel(set_mode(ctlval, 1, SMODE_NORMAL) | refresh,
-		ctl_reg);
-
-	dram_wait(0x20000);
-
-	/* Do not set delay lines, only for MDDR */
-}
--- a/arch/arm/cpu/arm1136/mx35/relocate.S
+++ b/arch/arm/cpu/arm1136/mx35/relocate.S
@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- *  relocate - i.MX35-specific vector relocation
- *
- *  Copyright (c) 2013  Albert ARIBAUD <albert.u.boot@aribaud.net>
- */
-
-#include <linux/linkage.h>
-
-/*
- * The i.MX35 SoC is very specific with respect to exceptions: it
- * does not provide RAM at the high vectors address (0xFFFF0000),
- * thus only the low address (0x00000000) is useable; but that is
- * in ROM, so let's avoid relocating the vectors.
- */
-	.section	.text.relocate_vectors,"ax",%progbits
-
-ENTRY(relocate_vectors)
-
-	bx	lr
-
-ENDPROC(relocate_vectors)
--- a/arch/arm/cpu/arm1136/mx35/timer.c
+++ b/arch/arm/cpu/arm1136/mx35/timer.c
@ -1,46 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2007
- * Sascha Hauer, Pengutronix
- *
- * (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <init.h>
-#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/crm_regs.h>
-#include <asm/ptrace.h>
-
-/* General purpose timers bitfields */
-#define GPTCR_SWR       (1<<15)	/* Software reset */
-#define GPTCR_FRR       (1<<9)	/* Freerun / restart */
-#define GPTCR_CLKSOURCE_32   (4<<6)	/* Clock source */
-#define GPTCR_TEN       (1)	/* Timer enable */
-
-/*
- * nothing really to do with interrupts, just starts up a counter.
- * The 32KHz 32-bit timer overruns in 134217 seconds
- */
-int timer_init(void)
-{
-	int i;
-	struct gpt_regs *gpt = (struct gpt_regs *)GPT1_BASE_ADDR;
-	struct ccm_regs *ccm = (struct ccm_regs *)CCM_BASE_ADDR;
-
-	/* setup GP Timer 1 */
-	writel(GPTCR_SWR, &gpt->ctrl);
-
-	writel(readl(&ccm->cgr1) | 3 << MXC_CCM_CGR1_GPT_OFFSET, &ccm->cgr1);
-
-	for (i = 0; i < 100; i++)
-		writel(0, &gpt->ctrl); /* We have no udelay by now */
-	writel(0, &gpt->pre); /* prescaler = 1 */
-	/* Freerun Mode, 32KHz input */
-	writel(readl(&gpt->ctrl) | GPTCR_CLKSOURCE_32 | GPTCR_FRR,
-			&gpt->ctrl);
-	writel(readl(&gpt->ctrl) | GPTCR_TEN, &gpt->ctrl);
-
-	return 0;
-}
--- a/arch/arm/cpu/arm926ejs/Makefile
+++ b/arch/arm/cpu/arm926ejs/Makefile
@ -12,8 +12,6 @@ extra-y	:=
 endif
 endif

-obj-$(CONFIG_ARMADA100) += armada100/
-obj-$(CONFIG_MX25) += mx25/
 obj-$(CONFIG_MX27) += mx27/
 obj-$(if $(filter mxs,$(SOC)),y) += mxs/
 obj-$(if $(filter spear,$(SOC)),y) += spear/
--- a/arch/arm/cpu/arm926ejs/armada100/Makefile
+++ b/arch/arm/cpu/arm926ejs/armada100/Makefile
@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2010
-# Marvell Semiconductor <www.marvell.com>
-# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
-
-obj-y	= cpu.o timer.o dram.o
--- a/arch/arm/cpu/arm926ejs/armada100/cpu.c
+++ b/arch/arm/cpu/arm926ejs/armada100/cpu.c
@ -1,93 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2010
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- * Contributor: Mahavir Jain <mjain@marvell.com>
- */
-
-#include <common.h>
-#include <cpu_func.h>
-#include <init.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/armada100.h>
-
-#define UARTCLK14745KHZ	(APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1))
-#define SET_MRVL_ID	(1<<8)
-#define L2C_RAM_SEL	(1<<4)
-
-int arch_cpu_init(void)
-{
-	u32 val;
-	struct armd1cpu_registers *cpuregs =
-		(struct armd1cpu_registers *) ARMD1_CPU_BASE;
-
-	struct armd1apb1_registers *apb1clkres =
-		(struct armd1apb1_registers *) ARMD1_APBC1_BASE;
-
-	struct armd1mpmu_registers *mpmu =
-		(struct armd1mpmu_registers *) ARMD1_MPMU_BASE;
-
-	/* set SEL_MRVL_ID bit in ARMADA100_CPU_CONF register */
-	val = readl(&cpuregs->cpu_conf);
-	val = val | SET_MRVL_ID;
-	writel(val, &cpuregs->cpu_conf);
-
-	/* Enable Clocks for all hardware units */
-	writel(0xFFFFFFFF, &mpmu->acgr);
-
-	/* Turn on AIB and AIB-APB Functional clock */
-	writel(APBC_APBCLK | APBC_FNCLK, &apb1clkres->aib);
-
-	/* ensure L2 cache is not mapped as SRAM */
-	val = readl(&cpuregs->cpu_conf);
-	val = val & ~(L2C_RAM_SEL);
-	writel(val, &cpuregs->cpu_conf);
-
-	/* Enable GPIO clock */
-	writel(APBC_APBCLK, &apb1clkres->gpio);
-
-#ifdef CONFIG_I2C_MV
-	/* Enable general I2C clock */
-	writel(APBC_RST | APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi0);
-	writel(APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi0);
-
-	/* Enable power I2C clock */
-	writel(APBC_RST | APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi1);
-	writel(APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi1);
-#endif
-
-	/*
-	 * Enable Functional and APB clock at 14.7456MHz
-	 * for configured UART console
-	 */
-#if (CONFIG_SYS_NS16550_COM1 == ARMD1_UART3_BASE)
-	writel(UARTCLK14745KHZ, &apb1clkres->uart3);
-#elif (CONFIG_SYS_NS16550_COM1 == ARMD1_UART2_BASE)
-	writel(UARTCLK14745KHZ, &apb1clkres->uart2);
-#else
-	writel(UARTCLK14745KHZ, &apb1clkres->uart1);
-#endif
-	icache_enable();
-
-	return 0;
-}
-
-#if defined(CONFIG_DISPLAY_CPUINFO)
-int print_cpuinfo(void)
-{
-	u32 id;
-	struct armd1cpu_registers *cpuregs =
-		(struct armd1cpu_registers *) ARMD1_CPU_BASE;
-
-	id = readl(&cpuregs->chip_id);
-	printf("SoC:   Armada 88AP%X-%X\n", (id & 0xFFF), (id >> 0x10));
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_I2C_MV
-void i2c_clk_enable(void)
-{
-}
-#endif
--- a/arch/arm/cpu/arm926ejs/armada100/dram.c
+++ b/arch/arm/cpu/arm926ejs/armada100/dram.c
@ -1,117 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2010
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>,
- * Contributor: Mahavir Jain <mjain@marvell.com>
- */
-
-#include <common.h>
-#include <init.h>
-#include <asm/global_data.h>
-#include <asm/io.h>
-#include <asm/arch/armada100.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * ARMADA100 DRAM controller supports upto 8 banks
- * for chip select 0 and 1
- */
-
-/*
- * DDR Memory Control Registers
- * Refer Datasheet Appendix A.17
- */
-struct armd1ddr_map_registers {
-	u32	cs;	/* Memory Address Map Register -CS */
-	u32	pad[3];
-};
-
-struct armd1ddr_registers {
-	u8	pad[0x100 - 0x000];
-	struct armd1ddr_map_registers mmap[2];
-};
-
-/*
- * armd1_sdram_base - reads SDRAM Base Address Register
- */
-u32 armd1_sdram_base(int chip_sel)
-{
-	struct armd1ddr_registers *ddr_regs =
-		(struct armd1ddr_registers *)ARMD1_DRAM_BASE;
-	u32 result = 0;
-	u32 CS_valid = 0x01 & readl(&ddr_regs->mmap[chip_sel].cs);
-
-	if (!CS_valid)
-		return 0;
-
-	result = readl(&ddr_regs->mmap[chip_sel].cs) & 0xFF800000;
-	return result;
-}
-
-/*
- * armd1_sdram_size - reads SDRAM size
- */
-u32 armd1_sdram_size(int chip_sel)
-{
-	struct armd1ddr_registers *ddr_regs =
-		(struct armd1ddr_registers *)ARMD1_DRAM_BASE;
-	u32 result = 0;
-	u32 CS_valid = 0x01 & readl(&ddr_regs->mmap[chip_sel].cs);
-
-	if (!CS_valid)
-		return 0;
-
-	result = readl(&ddr_regs->mmap[chip_sel].cs);
-	result = (result >> 16) & 0xF;
-	if (result < 0x7) {
-		printf("Unknown DRAM Size\n");
-		return -1;
-	} else {
-		return ((0x8 << (result - 0x7)) * 1024 * 1024);
-	}
-}
-
-int dram_init(void)
-{
-	int i;
-
-	gd->ram_size = 0;
-	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
-		gd->bd->bi_dram[i].start = armd1_sdram_base(i);
-		gd->bd->bi_dram[i].size = armd1_sdram_size(i);
-		/*
-		 * It is assumed that all memory banks are consecutive
-		 * and without gaps.
-		 * If the gap is found, ram_size will be reported for
-		 * consecutive memory only
-		 */
-		if (gd->bd->bi_dram[i].start != gd->ram_size)
-			break;
-
-		gd->ram_size += gd->bd->bi_dram[i].size;
-
-	}
-
-	for (; i < CONFIG_NR_DRAM_BANKS; i++) {
-		/* If above loop terminated prematurely, we need to set
-		 * remaining banks' start address & size as 0. Otherwise other
-		 * u-boot functions and Linux kernel gets wrong values which
-		 * could result in crash */
-		gd->bd->bi_dram[i].start = 0;
-		gd->bd->bi_dram[i].size = 0;
-	}
-	return 0;
-}
-
-/*
- * If this function is not defined here,
- * board.c alters dram bank zero configuration defined above.
- */
-int dram_init_banksize(void)
-{
-	dram_init();
-
-	return 0;
-}
--- a/arch/arm/cpu/arm926ejs/armada100/timer.c
+++ b/arch/arm/cpu/arm926ejs/armada100/timer.c
@ -1,198 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2010
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- * Contributor: Mahavir Jain <mjain@marvell.com>
- */
-
-#include <common.h>
-#include <cpu_func.h>
-#include <init.h>
-#include <time.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/armada100.h>
-#include <asm/global_data.h>
-#include <linux/delay.h>
-
-/*
- * Timer registers
- * Refer Section A.6 in Datasheet
- */
-struct armd1tmr_registers {
-	u32 clk_ctrl;	/* Timer clk control reg */
-	u32 match[9];	/* Timer match registers */
-	u32 count[3];	/* Timer count registers */
-	u32 status[3];
-	u32 ie[3];
-	u32 preload[3];	/* Timer preload value */
-	u32 preload_ctrl[3];
-	u32 wdt_match_en;
-	u32 wdt_match_r;
-	u32 wdt_val;
-	u32 wdt_sts;
-	u32 icr[3];
-	u32 wdt_icr;
-	u32 cer;	/* Timer count enable reg */
-	u32 cmr;
-	u32 ilr[3];
-	u32 wcr;
-	u32 wfar;
-	u32 wsar;
-	u32 cvwr;
-};
-
-#define TIMER			0	/* Use TIMER 0 */
-/* Each timer has 3 match registers */
-#define MATCH_CMP(x)		((3 * TIMER) + x)
-#define TIMER_LOAD_VAL		0xffffffff
-#define	COUNT_RD_REQ		0x1
-
-DECLARE_GLOBAL_DATA_PTR;
-/* Using gd->arch.tbu from timestamp and gd->arch.tbl for lastdec */
-
-/* For preventing risk of instability in reading counter value,
- * first set read request to register cvwr and then read same
- * register after it captures counter value.
- */
-ulong read_timer(void)
-{
-	struct armd1tmr_registers *armd1timers =
-		(struct armd1tmr_registers *) ARMD1_TIMER_BASE;
-	volatile int loop=100;
-
-	writel(COUNT_RD_REQ, &armd1timers->cvwr);
-	while (loop--);
-	return(readl(&armd1timers->cvwr));
-}
-
-static ulong get_timer_masked(void)
-{
-	ulong now = read_timer();
-
-	if (now >= gd->arch.tbl) {
-		/* normal mode */
-		gd->arch.tbu += now - gd->arch.tbl;
-	} else {
-		/* we have an overflow ... */
-		gd->arch.tbu += now + TIMER_LOAD_VAL - gd->arch.tbl;
-	}
-	gd->arch.tbl = now;
-
-	return gd->arch.tbu;
-}
-
-ulong get_timer(ulong base)
-{
-	return ((get_timer_masked() / (CONFIG_SYS_HZ_CLOCK / 1000)) -
-		base);
-}
-
-void __udelay(unsigned long usec)
-{
-	ulong delayticks;
-	ulong endtime;
-
-	delayticks = (usec * (CONFIG_SYS_HZ_CLOCK / 1000000));
-	endtime = get_timer_masked() + delayticks;
-
-	while (get_timer_masked() < endtime);
-}
-
-/*
- * init the Timer
- */
-int timer_init(void)
-{
-	struct armd1apb1_registers *apb1clkres =
-		(struct armd1apb1_registers *) ARMD1_APBC1_BASE;
-	struct armd1tmr_registers *armd1timers =
-		(struct armd1tmr_registers *) ARMD1_TIMER_BASE;
-
-	/* Enable Timer clock at 3.25 MHZ */
-	writel(APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3), &apb1clkres->timers);
-
-	/* load value into timer */
-	writel(0x0, &armd1timers->clk_ctrl);
-	/* Use Timer 0 Match Resiger 0 */
-	writel(TIMER_LOAD_VAL, &armd1timers->match[MATCH_CMP(0)]);
-	/* Preload value is 0 */
-	writel(0x0, &armd1timers->preload[TIMER]);
-	/* Enable match comparator 0 for Timer 0 */
-	writel(0x1, &armd1timers->preload_ctrl[TIMER]);
-
-	/* Enable timer 0 */
-	writel(0x1, &armd1timers->cer);
-	/* init the gd->arch.tbu and gd->arch.tbl value */
-	gd->arch.tbl = read_timer();
-	gd->arch.tbu = 0;
-
-	return 0;
-}
-
-#define MPMU_APRR_WDTR	(1<<4)
-#define TMR_WFAR	0xbaba	/* WDT Register First key */
-#define TMP_WSAR	0xeb10	/* WDT Register Second key */
-
-/*
- * This function uses internal Watchdog Timer
- * based reset mechanism.
- * Steps to write watchdog registers (protected access)
- * 1. Write key value to TMR_WFAR reg.
- * 2. Write key value to TMP_WSAR reg.
- * 3. Perform write operation.
- */
-void reset_cpu(void)
-{
-	struct armd1mpmu_registers *mpmu =
-		(struct armd1mpmu_registers *) ARMD1_MPMU_BASE;
-	struct armd1tmr_registers *armd1timers =
-		(struct armd1tmr_registers *) ARMD1_TIMER_BASE;
-	u32 val;
-
-	/* negate hardware reset to the WDT after system reset */
-	val = readl(&mpmu->aprr);
-	val = val | MPMU_APRR_WDTR;
-	writel(val, &mpmu->aprr);
-
-	/* reset/enable WDT clock */
-	writel(APBC_APBCLK | APBC_FNCLK | APBC_RST, &mpmu->wdtpcr);
-	readl(&mpmu->wdtpcr);
-	writel(APBC_APBCLK | APBC_FNCLK, &mpmu->wdtpcr);
-	readl(&mpmu->wdtpcr);
-
-	/* clear previous WDT status */
-	writel(TMR_WFAR, &armd1timers->wfar);
-	writel(TMP_WSAR, &armd1timers->wsar);
-	writel(0, &armd1timers->wdt_sts);
-
-	/* set match counter */
-	writel(TMR_WFAR, &armd1timers->wfar);
-	writel(TMP_WSAR, &armd1timers->wsar);
-	writel(0xf, &armd1timers->wdt_match_r);
-
-	/* enable WDT reset */
-	writel(TMR_WFAR, &armd1timers->wfar);
-	writel(TMP_WSAR, &armd1timers->wsar);
-	writel(0x3, &armd1timers->wdt_match_en);
-
-	while(1);
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
-	return get_timer(0);
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk(void)
-{
-	return (ulong)CONFIG_SYS_HZ;
-}
--- a/arch/arm/cpu/arm926ejs/mx25/Makefile
+++ b/arch/arm/cpu/arm926ejs/mx25/Makefile
@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-
-obj-y	+= generic.o timer.o reset.o relocate.o
--- a/arch/arm/cpu/arm926ejs/mx25/generic.c
+++ b/arch/arm/cpu/arm926ejs/mx25/generic.c
@ -1,274 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2009 DENX Software Engineering
- * Author: John Rigby <jrigby@gmail.com>
- *
- * Based on mx27/generic.c:
- *  Copyright (c) 2008 Eric Jarrige <eric.jarrige@armadeus.org>
- *  Copyright (c) 2009 Ilya Yanok <yanok@emcraft.com>
- */
-
-#include <common.h>
-#include <clock_legacy.h>
-#include <div64.h>
-#include <init.h>
-#include <net.h>
-#include <netdev.h>
-#include <vsprintf.h>
-#include <asm/global_data.h>
-#include <asm/io.h>
-#include <asm/arch-imx/cpu.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/clock.h>
-
-#ifdef CONFIG_FSL_ESDHC_IMX
-#include <fsl_esdhc_imx.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-#endif
-
-/*
- *  get the system pll clock in Hz
- *
- *                  mfi + mfn / (mfd +1)
- *  f = 2 * f_ref * --------------------
- *                        pd + 1
- */
-static unsigned int imx_decode_pll(unsigned int pll, unsigned int f_ref)
-{
-	unsigned int mfi = (pll >> CCM_PLL_MFI_SHIFT)
-	    & CCM_PLL_MFI_MASK;
-	int mfn = (pll >> CCM_PLL_MFN_SHIFT)
-	    & CCM_PLL_MFN_MASK;
-	unsigned int mfd = (pll >> CCM_PLL_MFD_SHIFT)
-	    & CCM_PLL_MFD_MASK;
-	unsigned int pd = (pll >> CCM_PLL_PD_SHIFT)
-	    & CCM_PLL_PD_MASK;
-
-	mfi = mfi <= 5 ? 5 : mfi;
-	mfn = mfn >= 512 ? mfn - 1024 : mfn;
-	mfd += 1;
-	pd += 1;
-
-	return lldiv(2 * (u64) f_ref * (mfi * mfd + mfn),
-		     mfd * pd);
-}
-
-static ulong imx_get_mpllclk(void)
-{
-	struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE;
-	ulong fref = MXC_HCLK;
-
-	return imx_decode_pll(readl(&ccm->mpctl), fref);
-}
-
-static ulong imx_get_upllclk(void)
-{
-	struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE;
-	ulong fref = MXC_HCLK;
-
-	return imx_decode_pll(readl(&ccm->upctl), fref);
-}
-
-static ulong imx_get_armclk(void)
-{
-	struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE;
-	ulong cctl = readl(&ccm->cctl);
-	ulong fref = imx_get_mpllclk();
-	ulong div;
-
-	if (cctl & CCM_CCTL_ARM_SRC)
-		fref = lldiv((u64) fref * 3, 4);
-
-	div = ((cctl >> CCM_CCTL_ARM_DIV_SHIFT)
-	       & CCM_CCTL_ARM_DIV_MASK) + 1;
-
-	return fref / div;
-}
-
-static ulong imx_get_ahbclk(void)
-{
-	struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE;
-	ulong cctl = readl(&ccm->cctl);
-	ulong fref = imx_get_armclk();
-	ulong div;
-
-	div = ((cctl >> CCM_CCTL_AHB_DIV_SHIFT)
-	       & CCM_CCTL_AHB_DIV_MASK) + 1;
-
-	return fref / div;
-}
-
-static ulong imx_get_ipgclk(void)
-{
-	return imx_get_ahbclk() / 2;
-}
-
-static ulong imx_get_perclk(int clk)
-{
-	struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE;
-	ulong fref = readl(&ccm->mcr) & (1 << clk) ? imx_get_upllclk() :
-						     imx_get_ahbclk();
-	ulong div;
-
-	div = readl(&ccm->pcdr[CCM_PERCLK_REG(clk)]);
-	div = ((div >> CCM_PERCLK_SHIFT(clk)) & CCM_PERCLK_MASK) + 1;
-
-	return fref / div;
-}
-
-int imx_set_perclk(enum mxc_clock clk, bool from_upll, unsigned int freq)
-{
-	struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE;
-	ulong fref = from_upll ? imx_get_upllclk() : imx_get_ahbclk();
-	ulong div = (fref + freq - 1) / freq;
-
-	if (clk > MXC_UART_CLK || !div || --div > CCM_PERCLK_MASK)
-		return -EINVAL;
-
-	clrsetbits_le32(&ccm->pcdr[CCM_PERCLK_REG(clk)],
-			CCM_PERCLK_MASK << CCM_PERCLK_SHIFT(clk),
-			div << CCM_PERCLK_SHIFT(clk));
-	if (from_upll)
-		setbits_le32(&ccm->mcr, 1 << clk);
-	else
-		clrbits_le32(&ccm->mcr, 1 << clk);
-	return 0;
-}
-
-unsigned int mxc_get_clock(enum mxc_clock clk)
-{
-	if (clk >= MXC_CLK_NUM)
-		return -1;
-	switch (clk) {
-	case MXC_ARM_CLK:
-		return imx_get_armclk();
-	case MXC_AHB_CLK:
-		return imx_get_ahbclk();
-	case MXC_IPG_CLK:
-	case MXC_CSPI_CLK:
-	case MXC_FEC_CLK:
-		return imx_get_ipgclk();
-	default:
-		return imx_get_perclk(clk);
-	}
-}
-
-u32 get_cpu_rev(void)
-{
-	u32 srev;
-	u32 system_rev = 0x25000;
-
-	/* read SREV register from IIM module */
-	struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
-	srev = readl(&iim->iim_srev);
-
-	switch (srev) {
-	case 0x00:
-		system_rev |= CHIP_REV_1_0;
-		break;
-	case 0x01:
-		system_rev |= CHIP_REV_1_1;
-		break;
-	case 0x02:
-		system_rev |= CHIP_REV_1_2;
-		break;
-	default:
-		system_rev |= 0x8000;
-		break;
-	}
-
-	return system_rev;
-}
-
-#if defined(CONFIG_DISPLAY_CPUINFO)
-static char *get_reset_cause(void)
-{
-	/* read RCSR register from CCM module */
-	struct ccm_regs *ccm =
-		(struct ccm_regs *)IMX_CCM_BASE;
-
-	u32 cause = readl(&ccm->rcsr) & 0x0f;
-
-	if (cause == 0)
-		return "POR";
-	else if (cause == 1)
-		return "RST";
-	else if ((cause & 2) == 2)
-		return "WDOG";
-	else if ((cause & 4) == 4)
-		return "SW RESET";
-	else if ((cause & 8) == 8)
-		return "JTAG";
-	else
-		return "unknown reset";
-
-}
-
-int print_cpuinfo(void)
-{
-	char buf[32];
-	u32 cpurev = get_cpu_rev();
-
-	printf("CPU:   Freescale i.MX25 rev%d.%d%s at %s MHz\n",
-		(cpurev & 0xF0) >> 4, (cpurev & 0x0F),
-		((cpurev & 0x8000) ? " unknown" : ""),
-		strmhz(buf, imx_get_armclk()));
-	printf("Reset cause: %s\n", get_reset_cause());
-	return 0;
-}
-#endif
-
-#if defined(CONFIG_FEC_MXC)
-/*
- * Initializes on-chip ethernet controllers.
- * to override, implement board_eth_init()
- */
-int cpu_eth_init(struct bd_info *bis)
-{
-	struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE;
-	ulong val;
-
-	val = readl(&ccm->cgr0);
-	val |= (1 << 23);
-	writel(val, &ccm->cgr0);
-	return fecmxc_initialize(bis);
-}
-#endif
-
-int get_clocks(void)
-{
-#ifdef CONFIG_FSL_ESDHC_IMX
-#if CONFIG_SYS_FSL_ESDHC_ADDR == IMX_MMC_SDHC2_BASE
-	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
-#else
-	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK);
-#endif
-#endif
-	return 0;
-}
-
-#ifdef CONFIG_FSL_ESDHC_IMX
-/*
- * Initializes on-chip MMC controllers.
- * to override, implement board_mmc_init()
- */
-int cpu_mmc_init(struct bd_info *bis)
-{
-	return fsl_esdhc_mmc_init(bis);
-}
-#endif
-
-#ifdef CONFIG_FEC_MXC
-void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
-{
-	int i;
-	struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
-	struct fuse_bank *bank = &iim->bank[0];
-	struct fuse_bank0_regs *fuse =
-			(struct fuse_bank0_regs *)bank->fuse_regs;
-
-	for (i = 0; i < 6; i++)
-		mac[i] = readl(&fuse->mac_addr[i]) & 0xff;
-}
-#endif /* CONFIG_FEC_MXC */
--- a/arch/arm/cpu/arm926ejs/mx25/relocate.S
+++ b/arch/arm/cpu/arm926ejs/mx25/relocate.S
@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- *  relocate - i.MX25-specific vector relocation
- *
- *  Copyright (c) 2013  Albert ARIBAUD <albert.u.boot@aribaud.net>
- */
-
-#include <linux/linkage.h>
-
-/*
- * The i.MX25 SoC is very specific with respect to exceptions: it
- * does not provide RAM at the high vectors address (0xFFFF0000),
- * thus only the low address (0x00000000) is useable; but that is
- * in ROM, so let's avoid relocating the vectors.
- */
-	.section	.text.relocate_vectors,"ax",%progbits
-
-ENTRY(relocate_vectors)
-
-	bx	lr
-
-ENDPROC(relocate_vectors)
--- a/arch/arm/cpu/arm926ejs/mx25/reset.c
+++ b/arch/arm/cpu/arm926ejs/mx25/reset.c
@ -1,40 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * (C) Copyright 2009
- * Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
- */
-
-#include <common.h>
-#include <cpu_func.h>
-#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
-
-/*
- * Reset the cpu by setting up the watchdog timer and let it time out
- */
-void reset_cpu(void)
-{
-	struct wdog_regs *regs = (struct wdog_regs *)IMX_WDT_BASE;
-	/* Disable watchdog and set Time-Out field to 0 */
-	writew(0, &regs->wcr);
-
-	/* Write Service Sequence */
-	writew(WSR_UNLOCK1, &regs->wsr);
-	writew(WSR_UNLOCK2, &regs->wsr);
-
-	/* Enable watchdog */
-	writew(WCR_WDE, &regs->wcr);
-
-	while (1) ;
-}
--- a/arch/arm/cpu/arm926ejs/mx25/timer.c
+++ b/arch/arm/cpu/arm926ejs/mx25/timer.c
@ -1,50 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * (C) Copyright 2009
- * Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
- *
- * (C) Copyright 2009 DENX Software Engineering
- * Author: John Rigby <jrigby@gmail.com>
- *	Add support for MX25
- */
-
-#include <common.h>
-#include <init.h>
-#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/ptrace.h>
-
-/* nothing really to do with interrupts, just starts up a counter. */
-/* The 32KHz 32-bit timer overruns in 134217 seconds */
-int timer_init(void)
-{
-	int i;
-	struct gpt_regs *gpt = (struct gpt_regs *)IMX_GPT1_BASE;
-	struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE;
-
-	/* setup GP Timer 1 */
-	writel(GPT_CTRL_SWR, &gpt->ctrl);
-
-	writel(readl(&ccm->cgr1) | CCM_CGR1_GPT1, &ccm->cgr1);
-
-	for (i = 0; i < 100; i++)
-		writel(0, &gpt->ctrl); /* We have no udelay by now */
-	writel(0, &gpt->pre); /* prescaler = 1 */
-	/* Freerun Mode, 32KHz input */
-	writel(readl(&gpt->ctrl) | GPT_CTRL_CLKSOURCE_32 | GPT_CTRL_FRR,
-			&gpt->ctrl);
-	writel(readl(&gpt->ctrl) | GPT_CTRL_TEN, &gpt->ctrl);
-
-	return 0;
-}
--- a/arch/arm/include/asm/arch-armada100/armada100.h
+++ b/arch/arm/include/asm/arch-armada100/armada100.h
@ -1,59 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2010
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- * Contributor: Mahavir Jain <mjain@marvell.com>
- */
-
-#ifndef _ASM_ARCH_ARMADA100_H
-#define _ASM_ARCH_ARMADA100_H
-
-#if defined (CONFIG_ARMADA100)
-
-/* Common APB clock register bit definitions */
-#define APBC_APBCLK     (1<<0)  /* APB Bus Clock Enable */
-#define APBC_FNCLK      (1<<1)  /* Functional Clock Enable */
-#define APBC_RST        (1<<2)  /* Reset Generation */
-/* Functional Clock Selection Mask */
-#define APBC_FNCLKSEL(x)        (((x) & 0xf) << 4)
-
-/* Fast Ethernet Controller Clock register definition */
-#define FE_CLK_RST		0x1
-#define FE_CLK_ENA		0x8
-
-/* SSP2 Clock Control */
-#define SSP2_APBCLK		0x01
-#define SSP2_FNCLK		0x02
-
-/* USB Clock/reset control bits */
-#define USB_SPH_AXICLK_EN	0x10
-#define USB_SPH_AXI_RST		0x02
-
-/* MPMU Clocks */
-#define APB2_26M_EN		(1 << 20)
-#define AP_26M			(1 << 4)
-
-/* Register Base Addresses */
-#define ARMD1_DRAM_BASE		0xB0000000
-#define ARMD1_FEC_BASE		0xC0800000
-#define ARMD1_TIMER_BASE	0xD4014000
-#define ARMD1_APBC1_BASE	0xD4015000
-#define ARMD1_APBC2_BASE	0xD4015800
-#define ARMD1_UART1_BASE	0xD4017000
-#define ARMD1_UART2_BASE	0xD4018000
-#define ARMD1_GPIO_BASE		0xD4019000
-#define ARMD1_SSP1_BASE		0xD401B000
-#define ARMD1_SSP2_BASE		0xD401C000
-#define ARMD1_MFPR_BASE		0xD401E000
-#define ARMD1_SSP3_BASE		0xD401F000
-#define ARMD1_SSP4_BASE		0xD4020000
-#define ARMD1_SSP5_BASE		0xD4021000
-#define ARMD1_UART3_BASE	0xD4026000
-#define ARMD1_MPMU_BASE		0xD4050000
-#define ARMD1_USB_HOST_BASE	0xD4209000
-#define ARMD1_APMU_BASE		0xD4282800
-#define ARMD1_CPU_BASE		0xD4282C00
-
-#endif /* CONFIG_ARMADA100 */
-#endif /* _ASM_ARCH_ARMADA100_H */
--- a/arch/arm/include/asm/arch-armada100/config.h
+++ b/arch/arm/include/asm/arch-armada100/config.h
@ -1,27 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2011
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Lei Wen <leiwen@marvell.com>
- */
-
-/*
- * This file should be included in board config header file.
- *
- * It supports common definitions for Armada100 platform
- */
-
-#ifndef _ARMD1_CONFIG_H
-#define _ARMD1_CONFIG_H
-
-#include <asm/arch/armada100.h>
-
-#define CONFIG_SYS_TCLK		(14745600)	/* NS16550 clk config */
-#define CONFIG_SYS_HZ_CLOCK	(3250000)	/* Timer Freq. 3.25MHZ */
-#define CONFIG_MARVELL_MFP			/* Enable mvmfp driver */
-#define MV_MFPR_BASE		ARMD1_MFPR_BASE
-#define MV_UART_CONSOLE_BASE	ARMD1_UART1_BASE
-#define CONFIG_SYS_NS16550_IER	(1 << 6)	/* Bit 6 in UART_IER register
-						represents UART Unit Enable */
-
-#endif /* _ARMD1_CONFIG_H */
--- a/arch/arm/include/asm/arch-armada100/cpu.h
+++ b/arch/arm/include/asm/arch-armada100/cpu.h
@ -1,161 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2010
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>, Contributor: Mahavir Jain <mjain@marvell.com>
- */
-
-#ifndef _ARMADA100CPU_H
-#define _ARMADA100CPU_H
-
-#include <asm/io.h>
-#include <asm/system.h>
-
-/*
- * Main Power Management (MPMU) Registers
- * Refer Datasheet Appendix A.8
- */
-struct armd1mpmu_registers {
-	u8 pad0[0x08 - 0x00];
-	u32 fccr;	/*0x0008*/
-	u32 pocr;	/*0x000c*/
-	u32 posr;	/*0x0010*/
-	u32 succr;	/*0x0014*/
-	u8 pad1[0x030 - 0x014 - 4];
-	u32 gpcr;	/*0x0030*/
-	u8 pad2[0x200 - 0x030 - 4];
-	u32 wdtpcr;	/*0x0200*/
-	u8 pad3[0x1000 - 0x200 - 4];
-	u32 apcr;	/*0x1000*/
-	u32 apsr;	/*0x1004*/
-	u8 pad4[0x1020 - 0x1004 - 4];
-	u32 aprr;	/*0x1020*/
-	u32 acgr;	/*0x1024*/
-	u32 arsr;	/*0x1028*/
-};
-
-/*
- * Application Subsystem Power Management
- * Refer Datasheet Appendix A.9
- */
-struct armd1apmu_registers {
-	u32 pcr;		/* 0x000 */
-	u32 ccr;		/* 0x004 */
-	u32 pad1;
-	u32 ccsr;		/* 0x00C */
-	u32 fc_timer;		/* 0x010 */
-	u32 pad2;
-	u32 ideal_cfg;		/* 0x018 */
-	u8 pad3[0x04C - 0x018 - 4];
-	u32 lcdcrc;		/* 0x04C */
-	u32 cciccrc;		/* 0x050 */
-	u32 sd1crc;		/* 0x054 */
-	u32 sd2crc;		/* 0x058 */
-	u32 usbcrc;		/* 0x05C */
-	u32 nfccrc;		/* 0x060 */
-	u32 dmacrc;		/* 0x064 */
-	u32 pad4;
-	u32 buscrc;		/* 0x06C */
-	u8 pad5[0x07C - 0x06C - 4];
-	u32 wake_clr;		/* 0x07C */
-	u8 pad6[0x090 - 0x07C - 4];
-	u32 core_status;	/* 0x090 */
-	u32 rfsc;		/* 0x094 */
-	u32 imr;		/* 0x098 */
-	u32 irwc;		/* 0x09C */
-	u32 isr;		/* 0x0A0 */
-	u8 pad7[0x0B0 - 0x0A0 - 4];
-	u32 mhst;		/* 0x0B0 */
-	u32 msr;		/* 0x0B4 */
-	u8 pad8[0x0C0 - 0x0B4 - 4];
-	u32 msst;		/* 0x0C0 */
-	u32 pllss;		/* 0x0C4 */
-	u32 smb;		/* 0x0C8 */
-	u32 gccrc;		/* 0x0CC */
-	u8 pad9[0x0D4 - 0x0CC - 4];
-	u32 smccrc;		/* 0x0D4 */
-	u32 pad10;
-	u32 xdcrc;		/* 0x0DC */
-	u32 sd3crc;		/* 0x0E0 */
-	u32 sd4crc;		/* 0x0E4 */
-	u8 pad11[0x0F0 - 0x0E4 - 4];
-	u32 cfcrc;		/* 0x0F0 */
-	u32 mspcrc;		/* 0x0F4 */
-	u32 cmucrc;		/* 0x0F8 */
-	u32 fecrc;		/* 0x0FC */
-	u32 pciecrc;		/* 0x100 */
-	u32 epdcrc;		/* 0x104 */
-};
-
-/*
- * APB1 Clock Reset/Control Registers
- * Refer Datasheet Appendix A.10
- */
-struct armd1apb1_registers {
-	u32 uart1;	/*0x000*/
-	u32 uart2;	/*0x004*/
-	u32 gpio;	/*0x008*/
-	u32 pwm1;	/*0x00c*/
-	u32 pwm2;	/*0x010*/
-	u32 pwm3;	/*0x014*/
-	u32 pwm4;	/*0x018*/
-	u8 pad0[0x028 - 0x018 - 4];
-	u32 rtc;	/*0x028*/
-	u32 twsi0;	/*0x02c*/
-	u32 kpc;	/*0x030*/
-	u32 timers;	/*0x034*/
-	u8 pad1[0x03c - 0x034 - 4];
-	u32 aib;	/*0x03c*/
-	u32 sw_jtag;	/*0x040*/
-	u32 timer1;	/*0x044*/
-	u32 onewire;	/*0x048*/
-	u8 pad2[0x050 - 0x048 - 4];
-	u32 asfar;	/*0x050 AIB Secure First Access Reg*/
-	u32 assar;	/*0x054 AIB Secure Second Access Reg*/
-	u8 pad3[0x06c - 0x054 - 4];
-	u32 twsi1;	/*0x06c*/
-	u32 uart3;	/*0x070*/
-	u8 pad4[0x07c - 0x070 - 4];
-	u32 timer2;	/*0x07C*/
-	u8 pad5[0x084 - 0x07c - 4];
-	u32 ac97;	/*0x084*/
-};
-
-/*
-* APB2 Clock Reset/Control Registers
-* Refer Datasheet Appendix A.11
-*/
-struct armd1apb2_registers {
-	u32 pad1[0x01C - 0x000];
-	u32 ssp1_clkrst;		/* 0x01C */
-	u32 ssp2_clkrst;		/* 0x020 */
-	u32 pad2[0x04C - 0x020 - 4];
-	u32 ssp3_clkrst;		/* 0x04C */
-	u32 pad3[0x058 - 0x04C - 4];
-	u32 ssp4_clkrst;		/* 0x058 */
-	u32 ssp5_clkrst;		/* 0x05C */
-};
-
-/*
- * CPU Interface Registers
- * Refer Datasheet Appendix A.2
- */
-struct armd1cpu_registers {
-	u32 chip_id;		/* Chip Id Reg */
-	u32 pad;
-	u32 cpu_conf;		/* CPU Conf Reg */
-	u32 pad1;
-	u32 cpu_sram_spd;	/* CPU SRAM Speed Reg */
-	u32 pad2;
-	u32 cpu_l2c_spd;	/* CPU L2cache Speed Conf */
-	u32 mcb_conf;		/* MCB Conf Reg */
-	u32 sys_boot_ctl;	/* Sytem Boot Control */
-};
-
-/*
- * Functions
- */
-u32 armd1_sdram_base(int);
-u32 armd1_sdram_size(int);
-
-#endif /* _ARMADA100CPU_H */
--- a/arch/arm/include/asm/arch-armada100/gpio.h
+++ b/arch/arm/include/asm/arch-armada100/gpio.h
@ -1,31 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2011
- * eInfochips Ltd. <www.einfochips.com>
- * Written-by: Ajay Bhargav <contact@8051projects.net>
- *
- * (C) Copyright 2010
- * Marvell Semiconductor <www.marvell.com>
- */
-
-#ifndef _ASM_ARCH_GPIO_H
-#define _ASM_ARCH_GPIO_H
-
-#include <asm/types.h>
-#include <asm/arch/armada100.h>
-
-#define GPIO_HIGH		1
-#define GPIO_LOW		0
-
-#define GPIO_TO_REG(gp)		(gp >> 5)
-#define GPIO_TO_BIT(gp)		(1 << (gp & 0x1F))
-#define GPIO_VAL(gp, val)	((val >> (gp & 0x1F)) & 0x01)
-
-static inline void *get_gpio_base(int bank)
-{
-	const unsigned int offset[4] = {0, 4, 8, 0x100};
-	/* gpio register bank offset - refer Appendix A.36 */
-	return (struct gpio_reg *)(ARMD1_GPIO_BASE + offset[bank]);
-}
-
-#endif /* _ASM_ARCH_GPIO_H */
--- a/arch/arm/include/asm/arch-armada100/mfp.h
+++ b/arch/arm/include/asm/arch-armada100/mfp.h
@ -1,79 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Based on linux/arch/arm/mach-mpp/include/mfp-pxa168.h
- * (C) Copyright 2007
- * Marvell Semiconductor <www.marvell.com>
- * 2007-08-21: eric miao <eric.miao@marvell.com>
- *
- * (C) Copyright 2010
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- * Contributor: Mahavir Jain <mjain@marvell.com>
- */
-
-#ifndef __ARMADA100_MFP_H
-#define __ARMADA100_MFP_H
-
-/*
- * Frequently used MFP Configuration macros for all ARMADA100 family of SoCs
- *
- *				    offset, pull,pF, drv,dF, edge,eF ,afn,aF
- */
-/* UART1 */
-#define MFP107_UART1_TXD	(MFP_REG(0x01ac) | MFP_AF1 | MFP_DRIVE_FAST)
-#define MFP107_UART1_RXD	(MFP_REG(0x01ac) | MFP_AF2 | MFP_DRIVE_FAST)
-#define MFP108_UART1_RXD	(MFP_REG(0x01b0) | MFP_AF1 | MFP_DRIVE_FAST)
-#define MFP108_UART1_TXD	(MFP_REG(0x01b0) | MFP_AF2 | MFP_DRIVE_FAST)
-#define MFP109_UART1_CTS	(MFP_REG(0x01b4) | MFP_AF1 | MFP_DRIVE_MEDIUM)
-#define MFP109_UART1_RTS	(MFP_REG(0x01b4) | MFP_AF2 | MFP_DRIVE_MEDIUM)
-#define MFP110_UART1_RTS	(MFP_REG(0x01b8) | MFP_AF1 | MFP_DRIVE_MEDIUM)
-#define MFP110_UART1_CTS	(MFP_REG(0x01b8) | MFP_AF2 | MFP_DRIVE_MEDIUM)
-#define MFP111_UART1_RI		(MFP_REG(0x01bc) | MFP_AF1 | MFP_DRIVE_MEDIUM)
-#define MFP111_UART1_DSR	(MFP_REG(0x01bc) | MFP_AF2 | MFP_DRIVE_MEDIUM)
-#define MFP112_UART1_DTR	(MFP_REG(0x01c0) | MFP_AF1 | MFP_DRIVE_MEDIUM)
-#define MFP112_UART1_DCD	(MFP_REG(0x01c0) | MFP_AF2 | MFP_DRIVE_MEDIUM)
-
-/* UART2 */
-#define MFP47_UART2_RXD		(MFP_REG(0x0028) | MFP_AF6 | MFP_DRIVE_MEDIUM)
-#define MFP48_UART2_TXD		(MFP_REG(0x002c) | MFP_AF6 | MFP_DRIVE_MEDIUM)
-#define MFP88_UART2_RXD		(MFP_REG(0x0160) | MFP_AF2 | MFP_DRIVE_MEDIUM)
-#define MFP89_UART2_TXD		(MFP_REG(0x0164) | MFP_AF2 | MFP_DRIVE_MEDIUM)
-
-/* UART3 */
-#define MFPO8_UART3_TXD		(MFP_REG(0x06c) | MFP_AF2 | MFP_DRIVE_MEDIUM)
-#define MFPO9_UART3_RXD		(MFP_REG(0x070) | MFP_AF2 | MFP_DRIVE_MEDIUM)
-
-/* I2c */
-#define MFP105_CI2C_SDA		(MFP_REG(0x1a4) | MFP_AF1 | MFP_DRIVE_MEDIUM)
-#define MFP106_CI2C_SCL		(MFP_REG(0x1a8) | MFP_AF1 | MFP_DRIVE_MEDIUM)
-
-/* Fast Ethernet */
-#define MFP086_ETH_TXCLK	(MFP_REG(0x158) | MFP_AF5 | MFP_DRIVE_MEDIUM)
-#define MFP087_ETH_TXEN		(MFP_REG(0x15C) | MFP_AF5 | MFP_DRIVE_MEDIUM)
-#define MFP088_ETH_TXDQ3	(MFP_REG(0x160) | MFP_AF5 | MFP_DRIVE_MEDIUM)
-#define MFP089_ETH_TXDQ2	(MFP_REG(0x164) | MFP_AF5 | MFP_DRIVE_MEDIUM)
-#define MFP090_ETH_TXDQ1	(MFP_REG(0x168) | MFP_AF5 | MFP_DRIVE_MEDIUM)
-#define MFP091_ETH_TXDQ0	(MFP_REG(0x16C) | MFP_AF5 | MFP_DRIVE_MEDIUM)
-#define MFP092_ETH_CRS		(MFP_REG(0x170) | MFP_AF5 | MFP_DRIVE_MEDIUM)
-#define MFP093_ETH_COL		(MFP_REG(0x174) | MFP_AF5 | MFP_DRIVE_MEDIUM)
-#define MFP094_ETH_RXCLK	(MFP_REG(0x178) | MFP_AF5 | MFP_DRIVE_MEDIUM)
-#define MFP095_ETH_RXER		(MFP_REG(0x17C) | MFP_AF5 | MFP_DRIVE_MEDIUM)
-#define MFP096_ETH_RXDQ3	(MFP_REG(0x180) | MFP_AF5 | MFP_DRIVE_MEDIUM)
-#define MFP097_ETH_RXDQ2	(MFP_REG(0x184) | MFP_AF5 | MFP_DRIVE_MEDIUM)
-#define MFP098_ETH_RXDQ1	(MFP_REG(0x188) | MFP_AF5 | MFP_DRIVE_MEDIUM)
-#define MFP099_ETH_RXDQ0	(MFP_REG(0x18C) | MFP_AF5 | MFP_DRIVE_MEDIUM)
-#define MFP100_ETH_MDC		(MFP_REG(0x190) | MFP_AF5 | MFP_DRIVE_MEDIUM)
-#define MFP101_ETH_MDIO		(MFP_REG(0x194) | MFP_AF5 | MFP_DRIVE_MEDIUM)
-#define MFP103_ETH_RXDV		(MFP_REG(0x19C) | MFP_AF5 | MFP_DRIVE_MEDIUM)
-
-/* SPI */
-#define MFP107_SSP2_RXD		(MFP_REG(0x1AC) | MFP_AF4 | MFP_DRIVE_MEDIUM)
-#define MFP108_SSP2_TXD		(MFP_REG(0x1B0) | MFP_AF4 | MFP_DRIVE_MEDIUM)
-#define MFP110_SSP2_CS		(MFP_REG(0x1B8) | MFP_AF0 | MFP_DRIVE_MEDIUM)
-#define MFP111_SSP2_CLK		(MFP_REG(0x1BC) | MFP_AF4 | MFP_DRIVE_MEDIUM)
-
-/* More macros can be defined here... */
-
-#define MFP_PIN_MAX	117
-
-#endif /* __ARMADA100_MFP_H */
--- a/arch/arm/include/asm/arch-armada100/spi.h
+++ b/arch/arm/include/asm/arch-armada100/spi.h
@ -1,78 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2011
- * eInfochips Ltd. <www.einfochips.com>
- * Written-by: Ajay Bhargav <contact@8051projects.net>
- *
- * (C) Copyright 2010
- * Marvell Semiconductor <www.marvell.com>
- */
-
-#ifndef __ARMADA100_SPI_H_
-#define __ARMADA100_SPI_H_
-
-#include <asm/arch/armada100.h>
-
-#define CAT_BASE_ADDR(x)	ARMD1_SSP ## x ## _BASE
-#define SSP_REG_BASE(x)		CAT_BASE_ADDR(x)
-
-/*
- * SSP Serial Port Registers
- * refer Appendix A.26
- */
-struct ssp_reg {
-	u32 sscr0;	/* SSP Control Register 0 - 0x000 */
-	u32 sscr1;	/* SSP Control Register 1 - 0x004 */
-	u32 sssr;	/* SSP Status Register - 0x008 */
-	u32 ssitr;	/* SSP Interrupt Test Register - 0x00C */
-	u32 ssdr;	/* SSP Data Register - 0x010 */
-	u32 pad1[5];
-	u32 ssto;	/* SSP Timeout Register - 0x028 */
-	u32 sspsp;	/* SSP Programmable Serial Protocol Register - 0x02C */
-	u32 sstsa;	/* SSP TX Timeslot Active Register - 0x030 */
-	u32 ssrsa;	/* SSP RX Timeslot Active Register - 0x034 */
-	u32 sstss;	/* SSP Timeslot Status Register - 0x038 */
-};
-
-#define DEFAULT_WORD_LEN	8
-#define SSP_FLUSH_NUM		0x2000
-#define RX_THRESH_DEF		8
-#define TX_THRESH_DEF		8
-#define TIMEOUT_DEF		1000
-
-#define SSCR1_RIE	(1 << 0)	/* Receive FIFO Interrupt Enable */
-#define SSCR1_TIE	(1 << 1)	/* Transmit FIFO Interrupt Enable */
-#define SSCR1_LBM	(1 << 2)	/* Loop-Back Mode */
-#define SSCR1_SPO	(1 << 3)	/* Motorola SPI SSPSCLK polarity
-					   setting */
-#define SSCR1_SPH	(1 << 4)	/* Motorola SPI SSPSCLK phase setting */
-#define SSCR1_MWDS	(1 << 5)	/* Microwire Transmit Data Size */
-#define SSCR1_TFT	0x03c0		/* Transmit FIFO Threshold (mask) */
-#define SSCR1_RFT	0x3c00		/* Receive FIFO Threshold (mask) */
-
-#define SSCR1_TXTRESH(x)	((x - 1) << 6)	/* level [1..16] */
-#define SSCR1_RXTRESH(x)	((x - 1) << 10)	/* level [1..16] */
-#define SSCR1_TINTE		(1 << 19)	/* Receiver Time-out
-						   Interrupt enable */
-
-#define SSCR0_DSS		0x0f		/* Data Size Select (mask) */
-#define SSCR0_DATASIZE(x)	(x - 1)		/* Data Size Select [4..16] */
-#define SSCR0_FRF		0x30		/* FRame Format (mask) */
-#define SSCR0_MOTO		(0x0 << 4)	/* Motorola's Serial
-						   Peripheral Interface */
-#define SSCR0_TI		(0x1 << 4)	/* TI's Synchronous
-						   Serial Protocol (SSP) */
-#define SSCR0_NATIONAL		(0x2 << 4)	/* National Microwire */
-#define SSCR0_ECS		(1 << 6)	/* External clock select */
-#define SSCR0_SSE		(1 << 7)	/* Synchronous Serial Port
-						   Enable */
-
-#define SSSR_TNF	(1 << 2)	/* Transmit FIFO Not Full */
-#define SSSR_RNE	(1 << 3)	/* Receive FIFO Not Empty */
-#define SSSR_BSY	(1 << 4)	/* SSP Busy */
-#define SSSR_TFS	(1 << 5)	/* Transmit FIFO Service Request */
-#define SSSR_RFS	(1 << 6)	/* Receive FIFO Service Request */
-#define SSSR_ROR	(1 << 7)	/* Receive FIFO Overrun */
-#define SSSR_TINT	(1 << 19)	/* Receiver Time-out Interrupt */
-
-#endif /* __ARMADA100_SPI_H_ */
--- a/arch/arm/include/asm/arch-armada100/utmi-armada100.h
+++ b/arch/arm/include/asm/arch-armada100/utmi-armada100.h
@ -1,62 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2012
- * eInfochips Ltd. <www.einfochips.com>
- * Written-by: Ajay Bhargav <contact@8051projects.net>
- *
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- */
-
-#ifndef __UTMI_ARMADA100__
-#define __UTMI_ARMADA100__
-
-#define UTMI_PHY_BASE		0xD4206000
-
-/* utmi_ctrl - bits */
-#define INPKT_DELAY_SOF		(1 << 28)
-#define PLL_PWR_UP		2
-#define PHY_PWR_UP		1
-
-/* utmi_pll - bits */
-#define PLL_FBDIV_MASK		0x00000FF0
-#define PLL_FBDIV		4
-#define PLL_REFDIV_MASK		0x0000000F
-#define PLL_REFDIV		0
-#define PLL_READY		0x800000
-#define VCOCAL_START		(1 << 21)
-
-#define N_DIVIDER		0xEE
-#define M_DIVIDER		0x0B
-
-/* utmi_tx - bits */
-#define CK60_PHSEL		17
-#define PHSEL_VAL		0x4
-#define RCAL_START		(1 << 12)
-
-/*
- * USB PHY registers
- * Refer Datasheet Appendix A.21
- */
-struct armd1usb_phy_reg {
-	u32 utmi_rev;	/* USB PHY Revision */
-	u32 utmi_ctrl;	/* USB PHY Control register */
-	u32 utmi_pll;	/* PLL register */
-	u32 utmi_tx;	/* Tx register */
-	u32 utmi_rx;	/* Rx register */
-	u32 utmi_ivref;	/* IVREF register */
-	u32 utmi_tst_g0;	/* Test group 0 register */
-	u32 utmi_tst_g1;	/* Test group 1 register */
-	u32 utmi_tst_g2;	/* Test group 2 register */
-	u32 utmi_tst_g3;	/* Test group 3 register */
-	u32 utmi_tst_g4;	/* Test group 4 register */
-	u32 utmi_tst_g5;	/* Test group 5 register */
-	u32 utmi_reserve;	/* Reserve Register */
-	u32 utmi_usb_int;	/* USB interuppt register */
-	u32 utmi_dbg_ctl;	/* Debug control register */
-	u32 utmi_otg_addon;	/* OTG addon register */
-};
-
-int utmi_init(void);
-
-#endif /* __UTMI_ARMADA100__ */
--- a/arch/arm/include/asm/arch-mx25/clock.h
+++ b/arch/arm/include/asm/arch-mx25/clock.h
@ -1,57 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- *
- * (c) 2009 Ilya Yanok, Emcraft Systems <yanok@emcraft.com>
- *
- * Modified for mx25 by John Rigby <jrigby@gmail.com>
- */
-
-#ifndef __ASM_ARCH_CLOCK_H
-#define __ASM_ARCH_CLOCK_H
-
-#ifdef CONFIG_MX25_HCLK_FREQ
-#define MXC_HCLK	CONFIG_MX25_HCLK_FREQ
-#else
-#define MXC_HCLK	24000000
-#endif
-
-#ifdef CONFIG_MX25_CLK32
-#define MXC_CLK32	CONFIG_MX25_CLK32
-#else
-#define MXC_CLK32	32768
-#endif
-
-enum mxc_clock {
-	/* PER clocks (do not change order) */
-	MXC_CSI_CLK,
-	MXC_EPIT_CLK,
-	MXC_ESAI_CLK,
-	MXC_ESDHC1_CLK,
-	MXC_ESDHC2_CLK,
-	MXC_GPT_CLK,
-	MXC_I2C_CLK,
-	MXC_LCDC_CLK,
-	MXC_NFC_CLK,
-	MXC_OWIRE_CLK,
-	MXC_PWM_CLK,
-	MXC_SIM1_CLK,
-	MXC_SIM2_CLK,
-	MXC_SSI1_CLK,
-	MXC_SSI2_CLK,
-	MXC_UART_CLK,
-	/* Other clocks */
-	MXC_ARM_CLK,
-	MXC_AHB_CLK,
-	MXC_IPG_CLK,
-	MXC_CSPI_CLK,
-	MXC_FEC_CLK,
-	MXC_CLK_NUM
-};
-
-int imx_set_perclk(enum mxc_clock clk, bool from_upll, unsigned int freq);
-unsigned int mxc_get_clock(enum mxc_clock clk);
-
-#define imx_get_uartclk()	mxc_get_clock(MXC_UART_CLK)
-#define imx_get_fecclk()	mxc_get_clock(MXC_FEC_CLK)
-
-#endif /* __ASM_ARCH_CLOCK_H */
--- a/arch/arm/include/asm/arch-mx25/gpio.h
+++ b/arch/arm/include/asm/arch-mx25/gpio.h
@ -1,13 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2011
- * Stefano Babic, DENX Software Engineering, <sbabic@denx.de>
- */
-
-
-#ifndef __ASM_ARCH_MX25_GPIO_H
-#define __ASM_ARCH_MX25_GPIO_H
-
-#include <asm/mach-imx/gpio.h>
-
-#endif
--- a/arch/arm/include/asm/arch-mx25/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx25/imx-regs.h
@ -1,504 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2009, DENX Software Engineering
- * Author: John Rigby <jcrigby@gmail.com
- *
- *   Based on arch-mx31/imx-regs.h
- *	Copyright (C) 2009 Ilya Yanok,
- *		Emcraft Systems <yanok@emcraft.com>
- *   and arch-mx27/imx-regs.h
- *	Copyright (C) 2007 Pengutronix,
- *		Sascha Hauer <s.hauer@pengutronix.de>
- *	Copyright (C) 2009 Ilya Yanok,
- *		Emcraft Systems <yanok@emcraft.com>
- */
-
-#ifndef _IMX_REGS_H
-#define _IMX_REGS_H
-
-#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
-#include <asm/types.h>
-
-/* Clock Control Module (CCM) registers */
-struct ccm_regs {
-	u32 mpctl;	/* Core PLL Control */
-	u32 upctl;	/* USB PLL Control */
-	u32 cctl;	/* Clock Control */
-	u32 cgr0;	/* Clock Gating Control 0 */
-	u32 cgr1;	/* Clock Gating Control 1 */
-	u32 cgr2;	/* Clock Gating Control 2 */
-	u32 pcdr[4];	/* PER Clock Dividers */
-	u32 rcsr;	/* CCM Status */
-	u32 crdr;	/* CCM Reset and Debug */
-	u32 dcvr0;	/* DPTC Comparator Value 0 */
-	u32 dcvr1;	/* DPTC Comparator Value 1 */
-	u32 dcvr2;	/* DPTC Comparator Value 2 */
-	u32 dcvr3;	/* DPTC Comparator Value 3 */
-	u32 ltr0;	/* Load Tracking 0 */
-	u32 ltr1;	/* Load Tracking 1 */
-	u32 ltr2;	/* Load Tracking 2 */
-	u32 ltr3;	/* Load Tracking 3 */
-	u32 ltbr0;	/* Load Tracking Buffer 0 */
-	u32 ltbr1;	/* Load Tracking Buffer 1 */
-	u32 pcmr0;	/* Power Management Control 0 */
-	u32 pcmr1;	/* Power Management Control 1 */
-	u32 pcmr2;	/* Power Management Control 2 */
-	u32 mcr;	/* Miscellaneous Control */
-	u32 lpimr0;	/* Low Power Interrupt Mask 0 */
-	u32 lpimr1;	/* Low Power Interrupt Mask 1 */
-};
-
-/* Enhanced SDRAM Controller (ESDRAMC) registers */
-struct esdramc_regs {
-	u32 ctl0;	/* control 0 */
-	u32 cfg0;	/* configuration 0 */
-	u32 ctl1;	/* control 1 */
-	u32 cfg1;	/* configuration 1 */
-	u32 misc;	/* miscellaneous */
-	u32 pad[3];
-	u32 cdly1;	/* Delay Line 1 configuration debug */
-	u32 cdly2;	/* delay line 2 configuration debug */
-	u32 cdly3;	/* delay line 3 configuration debug */
-	u32 cdly4;	/* delay line 4 configuration debug */
-	u32 cdly5;	/* delay line 5 configuration debug */
-	u32 cdlyl;	/* delay line cycle length debug */
-};
-
-/* General Purpose Timer (GPT) registers */
-struct gpt_regs {
-	u32 ctrl;	/* control */
-	u32 pre;	/* prescaler */
-	u32 stat;	/* status */
-	u32 intr;	/* interrupt */
-	u32 cmp[3];	/* output compare 1-3 */
-	u32 capt[2];	/* input capture 1-2 */
-	u32 counter;	/* counter */
-};
-
-/* Watchdog Timer (WDOG) registers */
-struct wdog_regs {
-	u16 wcr;	/* Control */
-	u16 wsr;	/* Service */
-	u16 wrsr;	/* Reset Status */
-	u16 wicr;	/* Interrupt Control */
-	u16 wmcr;	/* Misc Control */
-};
-
-/* IIM control registers */
-struct iim_regs {
-	u32 iim_stat;
-	u32 iim_statm;
-	u32 iim_err;
-	u32 iim_emask;
-	u32 iim_fctl;
-	u32 iim_ua;
-	u32 iim_la;
-	u32 iim_sdat;
-	u32 iim_prev;
-	u32 iim_srev;
-	u32 iim_prg_p;
-	u32 iim_scs0;
-	u32 iim_scs1;
-	u32 iim_scs2;
-	u32 iim_scs3;
-	u32 res1[0x1f1];
-	struct fuse_bank {
-		u32 fuse_regs[0x20];
-		u32 fuse_rsvd[0xe0];
-	} bank[3];
-};
-
-struct fuse_bank0_regs {
-	u32 fuse0_7[8];
-	u32 uid[8];
-	u32 fuse16_25[0xa];
-	u32 mac_addr[6];
-};
-
-struct fuse_bank1_regs {
-	u32 fuse0_21[0x16];
-	u32 usr5;
-	u32 fuse23_29[7];
-	u32 usr6[2];
-};
-
-/* Multi-Layer AHB Crossbar Switch (MAX) registers */
-struct max_regs {
-	u32 mpr0;
-	u32 pad00[3];
-	u32 sgpcr0;
-	u32 pad01[59];
-	u32 mpr1;
-	u32 pad02[3];
-	u32 sgpcr1;
-	u32 pad03[59];
-	u32 mpr2;
-	u32 pad04[3];
-	u32 sgpcr2;
-	u32 pad05[59];
-	u32 mpr3;
-	u32 pad06[3];
-	u32 sgpcr3;
-	u32 pad07[59];
-	u32 mpr4;
-	u32 pad08[3];
-	u32 sgpcr4;
-	u32 pad09[251];
-	u32 mgpcr0;
-	u32 pad10[63];
-	u32 mgpcr1;
-	u32 pad11[63];
-	u32 mgpcr2;
-	u32 pad12[63];
-	u32 mgpcr3;
-	u32 pad13[63];
-	u32 mgpcr4;
-};
-
-/* AHB <-> IP-Bus Interface (AIPS) */
-struct aips_regs {
-	u32 mpr_0_7;
-	u32 mpr_8_15;
-};
-/* LCD controller registers */
-struct lcdc_regs {
-	u32 lssar;	/* Screen Start Address */
-	u32 lsr;	/* Size */
-	u32 lvpwr;	/* Virtual Page Width */
-	u32 lcpr;	/* Cursor Position */
-	u32 lcwhb;	/* Cursor Width Height and Blink */
-	u32 lccmr;	/* Color Cursor Mapping */
-	u32 lpcr;	/* Panel Configuration */
-	u32 lhcr;	/* Horizontal Configuration */
-	u32 lvcr;	/* Vertical Configuration */
-	u32 lpor;	/* Panning Offset */
-	u32 lscr;	/* Sharp Configuration */
-	u32 lpccr;	/* PWM Contrast Control */
-	u32 ldcr;	/* DMA Control */
-	u32 lrmcr;	/* Refresh Mode Control */
-	u32 licr;	/* Interrupt Configuration */
-	u32 lier;	/* Interrupt Enable */
-	u32 lisr;	/* Interrupt Status */
-	u32 res0[3];
-	u32 lgwsar;	/* Graphic Window Start Address */
-	u32 lgwsr;	/* Graphic Window Size */
-	u32 lgwvpwr;	/* Graphic Window Virtual Page Width Regist */
-	u32 lgwpor;	/* Graphic Window Panning Offset */
-	u32 lgwpr;	/* Graphic Window Position */
-	u32 lgwcr;	/* Graphic Window Control */
-	u32 lgwdcr;	/* Graphic Window DMA Control */
-	u32 res1[5];
-	u32 lauscr;	/* AUS Mode Control */
-	u32 lausccr;	/* AUS mode Cursor Control */
-	u32 res2[31 + 64*7];
-	u32 bglut;	/* Background Lookup Table */
-	u32 gwlut;	/* Graphic Window Lookup Table */
-};
-
-/* Wireless External Interface Module Registers */
-struct weim_regs {
-	u32 cscr0u;	/* Chip Select 0 Upper Register */
-	u32 cscr0l;	/* Chip Select 0 Lower Register */
-	u32 cscr0a;	/* Chip Select 0 Addition Register */
-	u32 pad0;
-	u32 cscr1u;	/* Chip Select 1 Upper Register */
-	u32 cscr1l;	/* Chip Select 1 Lower Register */
-	u32 cscr1a;	/* Chip Select 1 Addition Register */
-	u32 pad1;
-	u32 cscr2u;	/* Chip Select 2 Upper Register */
-	u32 cscr2l;	/* Chip Select 2 Lower Register */
-	u32 cscr2a;	/* Chip Select 2 Addition Register */
-	u32 pad2;
-	u32 cscr3u;	/* Chip Select 3 Upper Register */
-	u32 cscr3l;	/* Chip Select 3 Lower Register */
-	u32 cscr3a;	/* Chip Select 3 Addition Register */
-	u32 pad3;
-	u32 cscr4u;	/* Chip Select 4 Upper Register */
-	u32 cscr4l;	/* Chip Select 4 Lower Register */
-	u32 cscr4a;	/* Chip Select 4 Addition Register */
-	u32 pad4;
-	u32 cscr5u;	/* Chip Select 5 Upper Register */
-	u32 cscr5l;	/* Chip Select 5 Lower Register */
-	u32 cscr5a;	/* Chip Select 5 Addition Register */
-	u32 pad5;
-	u32 wcr;	/* WEIM Configuration Register */
-};
-
-/* Multi-Master Memory Interface */
-struct m3if_regs {
-	u32 ctl;	/* Control Register */
-	u32 wcfg0;	/* Watermark Configuration Register 0 */
-	u32 wcfg1;	/* Watermark Configuration Register1 */
-	u32 wcfg2;	/* Watermark Configuration Register2 */
-	u32 wcfg3;	/* Watermark Configuration Register 3 */
-	u32 wcfg4;	/* Watermark Configuration Register 4 */
-	u32 wcfg5;	/* Watermark Configuration Register 5 */
-	u32 wcfg6;	/* Watermark Configuration Register 6 */
-	u32 wcfg7;	/* Watermark Configuration Register 7 */
-	u32 wcsr;	/* Watermark Control and Status Register */
-	u32 scfg0;	/* Snooping Configuration Register 0 */
-	u32 scfg1;	/* Snooping Configuration Register 1 */
-	u32 scfg2;	/* Snooping Configuration Register 2 */
-	u32 ssr0;	/* Snooping Status Register 0 */
-	u32 ssr1;	/* Snooping Status Register 1 */
-	u32 res0;
-	u32 mlwe0;	/* Master Lock WEIM CS0 Register */
-	u32 mlwe1;	/* Master Lock WEIM CS1 Register */
-	u32 mlwe2;	/* Master Lock WEIM CS2 Register */
-	u32 mlwe3;	/* Master Lock WEIM CS3 Register */
-	u32 mlwe4;	/* Master Lock WEIM CS4 Register */
-	u32 mlwe5;	/* Master Lock WEIM CS5 Register */
-};
-
-/* Pulse width modulation */
-struct pwm_regs {
-	u32 cr;	/* Control Register */
-	u32 sr;	/* Status Register */
-	u32 ir;	/* Interrupt Register */
-	u32 sar;	/* Sample Register */
-	u32 pr;	/* Period Register */
-	u32 cnr;	/* Counter Register */
-};
-
-/* Enhanced Periodic Interrupt Timer */
-struct epit_regs {
-	u32 cr;	/* Control register */
-	u32 sr;	/* Status register */
-	u32 lr;	/* Load register */
-	u32 cmpr;	/* Compare register */
-	u32 cnr;	/* Counter register */
-};
-
-#endif
-
-#define ARCH_MXC
-
-/* AIPS 1 */
-#define IMX_AIPS1_BASE		(0x43F00000)
-#define IMX_MAX_BASE		(0x43F04000)
-#define IMX_CLKCTL_BASE		(0x43F08000)
-#define IMX_ETB_SLOT4_BASE	(0x43F0C000)
-#define IMX_ETB_SLOT5_BASE	(0x43F10000)
-#define IMX_ECT_CTIO_BASE	(0x43F18000)
-#define I2C1_BASE_ADDR		(0x43F80000)
-#define I2C3_BASE_ADDR		(0x43F84000)
-#define IMX_CAN1_BASE		(0x43F88000)
-#define IMX_CAN2_BASE		(0x43F8C000)
-#define UART1_BASE		(0x43F90000)
-#define UART2_BASE		(0x43F94000)
-#define I2C2_BASE_ADDR		(0x43F98000)
-#define IMX_OWIRE_BASE		(0x43F9C000)
-#define IMX_CSPI1_BASE		(0x43FA4000)
-#define IMX_KPP_BASE		(0x43FA8000)
-#define IMX_IOPADMUX_BASE	(0x43FAC000)
-#define IOMUXC_BASE_ADDR	IMX_IOPADMUX_BASE
-#define IMX_IOPADCTL_BASE	(0x43FAC22C)
-#define IMX_IOPADGRPCTL_BASE	(0x43FAC418)
-#define IMX_IOPADINPUTSEL_BASE	(0x43FAC460)
-#define IMX_AUDMUX_BASE		(0x43FB0000)
-#define IMX_ECT_IP1_BASE	(0x43FB8000)
-#define IMX_ECT_IP2_BASE	(0x43FBC000)
-
-/* SPBA */
-#define IMX_SPBA_BASE		(0x50000000)
-#define IMX_CSPI3_BASE		(0x50004000)
-#define UART4_BASE		(0x50008000)
-#define UART3_BASE		(0x5000C000)
-#define IMX_CSPI2_BASE		(0x50010000)
-#define IMX_SSI2_BASE		(0x50014000)
-#define IMX_ESAI_BASE		(0x50018000)
-#define IMX_ATA_DMA_BASE	(0x50020000)
-#define IMX_SIM1_BASE		(0x50024000)
-#define IMX_SIM2_BASE		(0x50028000)
-#define UART5_BASE		(0x5002C000)
-#define IMX_TSC_BASE		(0x50030000)
-#define IMX_SSI1_BASE		(0x50034000)
-#define IMX_FEC_BASE		(0x50038000)
-#define IMX_SPBA_CTRL_BASE	(0x5003C000)
-
-/* AIPS 2 */
-#define IMX_AIPS2_BASE		(0x53F00000)
-#define IMX_CCM_BASE		(0x53F80000)
-#define IMX_GPT4_BASE		(0x53F84000)
-#define IMX_GPT3_BASE		(0x53F88000)
-#define IMX_GPT2_BASE		(0x53F8C000)
-#define IMX_GPT1_BASE		(0x53F90000)
-#define IMX_EPIT1_BASE		(0x53F94000)
-#define IMX_EPIT2_BASE		(0x53F98000)
-#define IMX_GPIO4_BASE		(0x53F9C000)
-#define IMX_PWM2_BASE		(0x53FA0000)
-#define IMX_GPIO3_BASE		(0x53FA4000)
-#define IMX_PWM3_BASE		(0x53FA8000)
-#define IMX_SCC_BASE		(0x53FAC000)
-#define IMX_SCM_BASE		(0x53FAE000)
-#define IMX_SMN_BASE		(0x53FAF000)
-#define IMX_RNGD_BASE		(0x53FB0000)
-#define IMX_MMC_SDHC1_BASE	(0x53FB4000)
-#define IMX_MMC_SDHC2_BASE	(0x53FB8000)
-#define IMX_LCDC_BASE		(0x53FBC000)
-#define IMX_SLCDC_BASE		(0x53FC0000)
-#define IMX_PWM4_BASE		(0x53FC8000)
-#define IMX_GPIO1_BASE		(0x53FCC000)
-#define IMX_GPIO2_BASE		(0x53FD0000)
-#define IMX_SDMA_BASE		(0x53FD4000)
-#define IMX_WDT_BASE		(0x53FDC000)
-#define WDOG1_BASE_ADDR	IMX_WDT_BASE
-#define IMX_PWM1_BASE		(0x53FE0000)
-#define IMX_RTIC_BASE		(0x53FEC000)
-#define IMX_IIM_BASE		(0x53FF0000)
-#define IIM_BASE_ADDR		IMX_IIM_BASE
-#define IMX_USB_BASE		(0x53FF4000)
-/*
- * This is in contradiction to the imx25 reference manual, which says that
- * port 1's registers start at 0x53FF4200. The correct base address for
- * port 1 is 0x53FF4400. The kernel uses 0x53FF4400 as well.
- */
-#define IMX_USB_PORT_OFFSET	0x400
-#define IMX_CSI_BASE		(0x53FF8000)
-#define IMX_DRYICE_BASE		(0x53FFC000)
-
-#define IMX_ARM926_ROMPATCH	(0x60000000)
-#define IMX_ARM926_ASIC		(0x68000000)
-
-/* 128K Internal Static RAM */
-#define IMX_RAM_BASE		(0x78000000)
-#define IMX_RAM_SIZE		(128 * 1024)
-
-/* SDRAM BANKS */
-#define IMX_SDRAM_BANK0_BASE	(0x80000000)
-#define IMX_SDRAM_BANK1_BASE	(0x90000000)
-
-#define IMX_WEIM_CS0		(0xA0000000)
-#define IMX_WEIM_CS1		(0xA8000000)
-#define IMX_WEIM_CS2		(0xB0000000)
-#define IMX_WEIM_CS3		(0xB2000000)
-#define IMX_WEIM_CS4		(0xB4000000)
-#define IMX_ESDRAMC_BASE	(0xB8001000)
-#define IMX_WEIM_CTRL_BASE	(0xB8002000)
-#define IMX_M3IF_CTRL_BASE	(0xB8003000)
-#define IMX_EMI_CTRL_BASE	(0xB8004000)
-
-/* NAND Flash Controller */
-#define IMX_NFC_BASE		(0xBB000000)
-#define NFC_BASE_ADDR		IMX_NFC_BASE
-
-/* CCM bitfields */
-#define CCM_PLL_MFI_SHIFT	10
-#define CCM_PLL_MFI_MASK	0xf
-#define CCM_PLL_MFN_SHIFT	0
-#define CCM_PLL_MFN_MASK	0x3ff
-#define CCM_PLL_MFD_SHIFT	16
-#define CCM_PLL_MFD_MASK	0x3ff
-#define CCM_PLL_PD_SHIFT	26
-#define CCM_PLL_PD_MASK		0xf
-#define CCM_CCTL_ARM_DIV_SHIFT	30
-#define CCM_CCTL_ARM_DIV_MASK	3
-#define CCM_CCTL_AHB_DIV_SHIFT	28
-#define CCM_CCTL_AHB_DIV_MASK	3
-#define CCM_CCTL_ARM_SRC	(1 << 14)
-#define CCM_CGR1_GPT1		(1 << 19)
-#define CCM_PERCLK_REG(clk)	(clk / 4)
-#define CCM_PERCLK_SHIFT(clk)	(8 * (clk % 4))
-#define CCM_PERCLK_MASK		0x3f
-#define CCM_RCSR_NF_16BIT_SEL	(1 << 14)
-#define CCM_RCSR_NF_PS(v)	((v >> 26) & 3)
-#define CCM_CRDR_BT_UART_SRC_SHIFT	29
-#define CCM_CRDR_BT_UART_SRC_MASK	7
-
-/* ESDRAM Controller register bitfields */
-#define ESDCTL_PRCT(x)		(((x) & 0x3f) << 0)
-#define ESDCTL_BL		(1 << 7)
-#define ESDCTL_FP		(1 << 8)
-#define ESDCTL_PWDT(x)		(((x) & 3) << 10)
-#define ESDCTL_SREFR(x)		(((x) & 7) << 13)
-#define ESDCTL_DSIZ_16_UPPER	(0 << 16)
-#define ESDCTL_DSIZ_16_LOWER	(1 << 16)
-#define ESDCTL_DSIZ_32		(2 << 16)
-#define ESDCTL_COL8		(0 << 20)
-#define ESDCTL_COL9		(1 << 20)
-#define ESDCTL_COL10		(2 << 20)
-#define ESDCTL_ROW11		(0 << 24)
-#define ESDCTL_ROW12		(1 << 24)
-#define ESDCTL_ROW13		(2 << 24)
-#define ESDCTL_ROW14		(3 << 24)
-#define ESDCTL_ROW15		(4 << 24)
-#define ESDCTL_SP		(1 << 27)
-#define ESDCTL_SMODE_NORMAL	(0 << 28)
-#define ESDCTL_SMODE_PRECHARGE	(1 << 28)
-#define ESDCTL_SMODE_AUTO_REF	(2 << 28)
-#define ESDCTL_SMODE_LOAD_MODE	(3 << 28)
-#define ESDCTL_SMODE_MAN_REF	(4 << 28)
-#define ESDCTL_SDE		(1 << 31)
-
-#define ESDCFG_TRC(x)		(((x) & 0xf) << 0)
-#define ESDCFG_TRCD(x)		(((x) & 0x7) << 4)
-#define ESDCFG_TCAS(x)		(((x) & 0x3) << 8)
-#define ESDCFG_TRRD(x)		(((x) & 0x3) << 10)
-#define ESDCFG_TRAS(x)		(((x) & 0x7) << 12)
-#define ESDCFG_TWR		(1 << 15)
-#define ESDCFG_TMRD(x)		(((x) & 0x3) << 16)
-#define ESDCFG_TRP(x)		(((x) & 0x3) << 18)
-#define ESDCFG_TWTR		(1 << 20)
-#define ESDCFG_TXP(x)		(((x) & 0x3) << 21)
-
-#define ESDMISC_RST		(1 << 1)
-#define ESDMISC_MDDREN		(1 << 2)
-#define ESDMISC_MDDR_DL_RST	(1 << 3)
-#define ESDMISC_MDDR_MDIS	(1 << 4)
-#define ESDMISC_LHD		(1 << 5)
-#define ESDMISC_MA10_SHARE	(1 << 6)
-#define ESDMISC_SDRAM_RDY	(1 << 31)
-
-/* GPT bits */
-#define GPT_CTRL_SWR		(1 << 15)	/* Software reset */
-#define GPT_CTRL_FRR		(1 << 9)	/* Freerun / restart */
-#define GPT_CTRL_CLKSOURCE_32	(4 << 6)	/* Clock source	*/
-#define GPT_CTRL_TEN		1		/* Timer enable	*/
-
-/* WDOG enable */
-#define WCR_WDE			0x04
-#define WSR_UNLOCK1		0x5555
-#define WSR_UNLOCK2		0xAAAA
-
-/* MAX bits */
-#define MAX_MGPCR_AULB(x)	(((x) & 0x7) << 0)
-
-/* M3IF bits */
-#define M3IF_CTL_MRRP(x)	(((x) & 0xff) << 0)
-
-/* WEIM bits */
-/* 13 fields of the upper CS control register */
-#define WEIM_CSCR_U(sp, wp, bcd, bcs, psz, pme, sync, dol, \
-		cnc, wsc, ew, wws, edc) \
-		((sp) << 31 | (wp) << 30 | (bcd) << 28 | (bcs) << 24 | \
-		(psz) << 22 | (pme) << 21 | (sync) << 20 | (dol) << 16 | \
-		(cnc) << 14 | (wsc) << 8 | (ew) << 7 | (wws) << 4 | (edc) << 0)
-/* 12 fields of the lower CS control register */
-#define WEIM_CSCR_L(oea, oen, ebwa, ebwn, \
-		csa, ebc, dsz, csn, psr, cre, wrap, csen) \
-		((oea) << 28 | (oen) << 24 | (ebwa) << 20 | (ebwn) << 16 |\
-		(csa) << 12 | (ebc) << 11 | (dsz) << 8 | (csn) << 4 |\
-		(psr) << 3 | (cre) << 2 | (wrap) << 1 | (csen) << 0)
-/* 14 fields of the additional CS control register */
-#define WEIM_CSCR_A(ebra, ebrn, rwa, rwn, mum, lah, lbn, lba, dww, dct, \
-		wwu, age, cnc2, fce) \
-		((ebra) << 28 | (ebrn) << 24 | (rwa) << 20 | (rwn) << 16 |\
-		(mum) << 15 | (lah) << 13 | (lbn) << 10 | (lba) << 8 |\
-		(dww) << 6 | (dct) << 4 | (wwu) << 3 |\
-		(age) << 2 | (cnc2) << 1 | (fce) << 0)
-
-/* Names used in GPIO driver */
-#define GPIO1_BASE_ADDR		IMX_GPIO1_BASE
-#define GPIO2_BASE_ADDR		IMX_GPIO2_BASE
-#define GPIO3_BASE_ADDR		IMX_GPIO3_BASE
-#define GPIO4_BASE_ADDR		IMX_GPIO4_BASE
-
-/*
- * CSPI register definitions
- */
-#define MXC_SPI_BASE_ADDRESSES \
-	IMX_CSPI1_BASE, \
-	IMX_CSPI2_BASE, \
-	IMX_CSPI3_BASE
-
-#endif				/* _IMX_REGS_H */
--- a/arch/arm/include/asm/arch-mx25/iomux-mx25.h
+++ b/arch/arm/include/asm/arch-mx25/iomux-mx25.h
@ -1,537 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2013 ADVANSEE
- * Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
- *
- * Based on mainline Linux i.MX iomux-mx25.h file:
- * Copyright (C) 2009 by Lothar Wassmann <LW@KARO-electronics.de>
- *
- * Based on Linux arch/arm/mach-mx25/mx25_pins.h:
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * and Linux arch/arm/plat-mxc/include/mach/iomux-mx35.h:
- * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
- */
-
-#ifndef __IOMUX_MX25_H__
-#define __IOMUX_MX25_H__
-
-#include <asm/mach-imx/iomux-v3.h>
-
-/* Pad control groupings */
-#define MX25_KPP_ROW_PAD_CTRL	PAD_CTL_PUS_100K_UP
-#define MX25_KPP_COL_PAD_CTRL	(PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
-
-/*
- * The naming convention for the pad modes is MX25_PAD_<padname>__<padmode>
- * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
- * See also iomux-v3.h
- */
-
-/*							    PAD    MUX    ALT INPSE PATH PADCTRL */
-enum {
-	MX25_PAD_A10__A10			= IOMUX_PAD(0x000, 0x008, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_A10__GPIO_4_0			= IOMUX_PAD(0x000, 0x008, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_A13__A13			= IOMUX_PAD(0x22C, 0x00c, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_A13__GPIO_4_1			= IOMUX_PAD(0x22C, 0x00c, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_A14__A14			= IOMUX_PAD(0x230, 0x010, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_A14__GPIO_2_0			= IOMUX_PAD(0x230, 0x010, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_A15__A15			= IOMUX_PAD(0x234, 0x014, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_A15__GPIO_2_1			= IOMUX_PAD(0x234, 0x014, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_A16__A16			= IOMUX_PAD(0x000, 0x018, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_A16__GPIO_2_2			= IOMUX_PAD(0x000, 0x018, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_A17__A17			= IOMUX_PAD(0x238, 0x01c, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_A17__GPIO_2_3			= IOMUX_PAD(0x238, 0x01c, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_A18__A18			= IOMUX_PAD(0x23c, 0x020, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_A18__GPIO_2_4			= IOMUX_PAD(0x23c, 0x020, 0x05, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_A18__FEC_COL			= IOMUX_PAD(0x23c, 0x020, 0x07, 0x504, 0, NO_PAD_CTRL),
-
-	MX25_PAD_A19__A19			= IOMUX_PAD(0x240, 0x024, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_A19__FEC_RX_ER			= IOMUX_PAD(0x240, 0x024, 0x07, 0x518, 0, NO_PAD_CTRL),
-	MX25_PAD_A19__GPIO_2_5			= IOMUX_PAD(0x240, 0x024, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_A20__A20			= IOMUX_PAD(0x244, 0x028, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_A20__GPIO_2_6			= IOMUX_PAD(0x244, 0x028, 0x05, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_A20__FEC_RDATA2		= IOMUX_PAD(0x244, 0x028, 0x07, 0x50c, 0, NO_PAD_CTRL),
-
-	MX25_PAD_A21__A21			= IOMUX_PAD(0x248, 0x02c, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_A21__GPIO_2_7			= IOMUX_PAD(0x248, 0x02c, 0x05, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_A21__FEC_RDATA3		= IOMUX_PAD(0x248, 0x02c, 0x07, 0x510, 0, NO_PAD_CTRL),
-
-	MX25_PAD_A22__A22			= IOMUX_PAD(0x000, 0x030, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_A22__GPIO_2_8			= IOMUX_PAD(0x000, 0x030, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_A23__A23			= IOMUX_PAD(0x24c, 0x034, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_A23__GPIO_2_9			= IOMUX_PAD(0x24c, 0x034, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_A24__A24			= IOMUX_PAD(0x250, 0x038, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_A24__GPIO_2_10			= IOMUX_PAD(0x250, 0x038, 0x05, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_A24__FEC_RX_CLK		= IOMUX_PAD(0x250, 0x038, 0x07, 0x514, 0, NO_PAD_CTRL),
-
-	MX25_PAD_A25__A25			= IOMUX_PAD(0x254, 0x03c, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_A25__GPIO_2_11			= IOMUX_PAD(0x254, 0x03c, 0x05, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_A25__FEC_CRS			= IOMUX_PAD(0x254, 0x03c, 0x07, 0x508, 0, NO_PAD_CTRL),
-
-	MX25_PAD_EB0__EB0			= IOMUX_PAD(0x258, 0x040, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_EB0__AUD4_TXD			= IOMUX_PAD(0x258, 0x040, 0x04, 0x464, 0, NO_PAD_CTRL),
-	MX25_PAD_EB0__GPIO_2_12			= IOMUX_PAD(0x258, 0x040, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_EB1__EB1			= IOMUX_PAD(0x25c, 0x044, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_EB1__AUD4_RXD			= IOMUX_PAD(0x25c, 0x044, 0x04, 0x460, 0, NO_PAD_CTRL),
-	MX25_PAD_EB1__GPIO_2_13			= IOMUX_PAD(0x25c, 0x044, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_OE__OE				= IOMUX_PAD(0x260, 0x048, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_OE__AUD4_TXC			= IOMUX_PAD(0x260, 0x048, 0x04, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_OE__GPIO_2_14			= IOMUX_PAD(0x260, 0x048, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_CS0__CS0			= IOMUX_PAD(0x000, 0x04c, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CS0__GPIO_4_2			= IOMUX_PAD(0x000, 0x04c, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_CS1__CS1			= IOMUX_PAD(0x000, 0x050, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CS1__NF_CE3			= IOMUX_PAD(0x000, 0x050, 0x01, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CS1__GPIO_4_3			= IOMUX_PAD(0x000, 0x050, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_CS4__CS4			= IOMUX_PAD(0x264, 0x054, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CS4__NF_CE1			= IOMUX_PAD(0x264, 0x054, 0x01, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CS4__UART5_CTS			= IOMUX_PAD(0x264, 0x054, 0x03, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CS4__GPIO_3_20			= IOMUX_PAD(0x264, 0x054, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_CS5__CS5			= IOMUX_PAD(0x268, 0x058, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CS5__NF_CE2			= IOMUX_PAD(0x268, 0x058, 0x01, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CS5__UART5_RTS			= IOMUX_PAD(0x268, 0x058, 0x03, 0x574, 0, NO_PAD_CTRL),
-	MX25_PAD_CS5__GPIO_3_21			= IOMUX_PAD(0x268, 0x058, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_NF_CE0__NF_CE0			= IOMUX_PAD(0x26c, 0x05c, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_NF_CE0__GPIO_3_22		= IOMUX_PAD(0x26c, 0x05c, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_ECB__ECB			= IOMUX_PAD(0x270, 0x060, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_ECB__UART5_TXD_MUX		= IOMUX_PAD(0x270, 0x060, 0x03, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_ECB__GPIO_3_23			= IOMUX_PAD(0x270, 0x060, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_LBA__LBA			= IOMUX_PAD(0x274, 0x064, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_LBA__UART5_RXD_MUX		= IOMUX_PAD(0x274, 0x064, 0x03, 0x578, 0, NO_PAD_CTRL),
-	MX25_PAD_LBA__GPIO_3_24			= IOMUX_PAD(0x274, 0x064, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_BCLK__BCLK			= IOMUX_PAD(0x000, 0x068, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_BCLK__GPIO_4_4			= IOMUX_PAD(0x000, 0x068, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_RW__RW				= IOMUX_PAD(0x278, 0x06c, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_RW__AUD4_TXFS			= IOMUX_PAD(0x278, 0x06c, 0x04, 0x474, 0, NO_PAD_CTRL),
-	MX25_PAD_RW__GPIO_3_25			= IOMUX_PAD(0x278, 0x06c, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_NFWE_B__NFWE_B			= IOMUX_PAD(0x000, 0x070, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_NFWE_B__GPIO_3_26		= IOMUX_PAD(0x000, 0x070, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_NFRE_B__NFRE_B			= IOMUX_PAD(0x000, 0x074, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_NFRE_B__GPIO_3_27		= IOMUX_PAD(0x000, 0x074, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_NFALE__NFALE			= IOMUX_PAD(0x000, 0x078, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_NFALE__GPIO_3_28		= IOMUX_PAD(0x000, 0x078, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_NFCLE__NFCLE			= IOMUX_PAD(0x000, 0x07c, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_NFCLE__GPIO_3_29		= IOMUX_PAD(0x000, 0x07c, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_NFWP_B__NFWP_B			= IOMUX_PAD(0x000, 0x080, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_NFWP_B__GPIO_3_30		= IOMUX_PAD(0x000, 0x080, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_NFRB__NFRB			= IOMUX_PAD(0x27c, 0x084, 0x00, 0, 0, PAD_CTL_PKE),
-	MX25_PAD_NFRB__GPIO_3_31		= IOMUX_PAD(0x27c, 0x084, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_D15__D15			= IOMUX_PAD(0x280, 0x088, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_D15__LD16			= IOMUX_PAD(0x280, 0x088, 0x01, 0, 0, PAD_CTL_SRE_FAST),
-	MX25_PAD_D15__GPIO_4_5			= IOMUX_PAD(0x280, 0x088, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_D14__D14			= IOMUX_PAD(0x284, 0x08c, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_D14__LD17			= IOMUX_PAD(0x284, 0x08c, 0x01, 0, 0, PAD_CTL_SRE_FAST),
-	MX25_PAD_D14__GPIO_4_6			= IOMUX_PAD(0x284, 0x08c, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_D13__D13			= IOMUX_PAD(0x288, 0x090, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_D13__LD18			= IOMUX_PAD(0x288, 0x090, 0x01, 0, 0, PAD_CTL_SRE_FAST),
-	MX25_PAD_D13__GPIO_4_7			= IOMUX_PAD(0x288, 0x090, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_D12__D12			= IOMUX_PAD(0x28c, 0x094, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_D12__GPIO_4_8			= IOMUX_PAD(0x28c, 0x094, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_D11__D11			= IOMUX_PAD(0x290, 0x098, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_D11__GPIO_4_9			= IOMUX_PAD(0x290, 0x098, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_D10__D10			= IOMUX_PAD(0x294, 0x09c, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_D10__GPIO_4_10			= IOMUX_PAD(0x294, 0x09c, 0x05, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_D10__USBOTG_OC			= IOMUX_PAD(0x294, 0x09c, 0x06, 0x57c, 0, PAD_CTL_PUS_100K_UP),
-
-	MX25_PAD_D9__D9				= IOMUX_PAD(0x298, 0x0a0, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_D9__GPIO_4_11			= IOMUX_PAD(0x298, 0x0a0, 0x05, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_D9__USBH2_PWR			= IOMUX_PAD(0x298, 0x0a0, 0x06, 0, 0, PAD_CTL_PKE),
-
-	MX25_PAD_D8__D8				= IOMUX_PAD(0x29c, 0x0a4, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_D8__GPIO_4_12			= IOMUX_PAD(0x29c, 0x0a4, 0x05, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_D8__USBH2_OC			= IOMUX_PAD(0x29c, 0x0a4, 0x06, 0x580, 0, PAD_CTL_PUS_100K_UP),
-
-	MX25_PAD_D7__D7				= IOMUX_PAD(0x2a0, 0x0a8, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_D7__GPIO_4_13			= IOMUX_PAD(0x2a0, 0x0a8, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_D6__D6				= IOMUX_PAD(0x2a4, 0x0ac, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_D6__GPIO_4_14			= IOMUX_PAD(0x2a4, 0x0ac, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_D5__D5				= IOMUX_PAD(0x2a8, 0x0b0, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_D5__GPIO_4_15			= IOMUX_PAD(0x2a8, 0x0b0, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_D4__D4				= IOMUX_PAD(0x2ac, 0x0b4, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_D4__GPIO_4_16			= IOMUX_PAD(0x2ac, 0x0b4, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_D3__D3				= IOMUX_PAD(0x2b0, 0x0b8, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_D3__GPIO_4_17			= IOMUX_PAD(0x2b0, 0x0b8, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_D2__D2				= IOMUX_PAD(0x2b4, 0x0bc, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_D2__GPIO_4_18			= IOMUX_PAD(0x2b4, 0x0bc, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_D1__D1				= IOMUX_PAD(0x2b8, 0x0c0, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_D1__GPIO_4_19			= IOMUX_PAD(0x2b8, 0x0c0, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_D0__D0				= IOMUX_PAD(0x2bc, 0x0c4, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_D0__GPIO_4_20			= IOMUX_PAD(0x2bc, 0x0c4, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_LD0__LD0			= IOMUX_PAD(0x2c0, 0x0c8, 0x00, 0, 0, PAD_CTL_SRE_FAST),
-	MX25_PAD_LD0__CSI_D0			= IOMUX_PAD(0x2c0, 0x0c8, 0x02, 0x488, 0, NO_PAD_CTRL),
-	MX25_PAD_LD0__GPIO_2_15			= IOMUX_PAD(0x2c0, 0x0c8, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_LD1__LD1			= IOMUX_PAD(0x2c4, 0x0cc, 0x00, 0, 0, PAD_CTL_SRE_FAST),
-	MX25_PAD_LD1__CSI_D1			= IOMUX_PAD(0x2c4, 0x0cc, 0x02, 0x48c, 0, NO_PAD_CTRL),
-	MX25_PAD_LD1__GPIO_2_16			= IOMUX_PAD(0x2c4, 0x0cc, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_LD2__LD2			= IOMUX_PAD(0x2c8, 0x0d0, 0x00, 0, 0, PAD_CTL_SRE_FAST),
-	MX25_PAD_LD2__GPIO_2_17			= IOMUX_PAD(0x2c8, 0x0d0, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_LD3__LD3			= IOMUX_PAD(0x2cc, 0x0d4, 0x00, 0, 0, PAD_CTL_SRE_FAST),
-	MX25_PAD_LD3__GPIO_2_18			= IOMUX_PAD(0x2cc, 0x0d4, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_LD4__LD4			= IOMUX_PAD(0x2d0, 0x0d8, 0x00, 0, 0, PAD_CTL_SRE_FAST),
-	MX25_PAD_LD4__GPIO_2_19			= IOMUX_PAD(0x2d0, 0x0d8, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_LD5__LD5			= IOMUX_PAD(0x2d4, 0x0dc, 0x00, 0, 0, PAD_CTL_SRE_FAST),
-	MX25_PAD_LD5__GPIO_1_19			= IOMUX_PAD(0x2d4, 0x0dc, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_LD6__LD6			= IOMUX_PAD(0x2d8, 0x0e0, 0x00, 0, 0, PAD_CTL_SRE_FAST),
-	MX25_PAD_LD6__GPIO_1_20			= IOMUX_PAD(0x2d8, 0x0e0, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_LD7__LD7			= IOMUX_PAD(0x2dc, 0x0e4, 0x00, 0, 0, PAD_CTL_SRE_FAST),
-	MX25_PAD_LD7__GPIO_1_21			= IOMUX_PAD(0x2dc, 0x0e4, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_LD8__LD8			= IOMUX_PAD(0x2e0, 0x0e8, 0x00, 0, 0, PAD_CTL_SRE_FAST),
-	MX25_PAD_LD8__FEC_TX_ERR		= IOMUX_PAD(0x2e0, 0x0e8, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_LD9__LD9			= IOMUX_PAD(0x2e4, 0x0ec, 0x00, 0, 0, PAD_CTL_SRE_FAST),
-	MX25_PAD_LD9__FEC_COL			= IOMUX_PAD(0x2e4, 0x0ec, 0x05, 0x504, 1, NO_PAD_CTRL),
-
-	MX25_PAD_LD10__LD10			= IOMUX_PAD(0x2e8, 0x0f0, 0x00, 0, 0, PAD_CTL_SRE_FAST),
-	MX25_PAD_LD10__FEC_RX_ER		= IOMUX_PAD(0x2e8, 0x0f0, 0x05, 0x518, 1, NO_PAD_CTRL),
-
-	MX25_PAD_LD11__LD11			= IOMUX_PAD(0x2ec, 0x0f4, 0x00, 0, 0, PAD_CTL_SRE_FAST),
-	MX25_PAD_LD11__FEC_RDATA2		= IOMUX_PAD(0x2ec, 0x0f4, 0x05, 0x50c, 1, NO_PAD_CTRL),
-
-	MX25_PAD_LD12__LD12			= IOMUX_PAD(0x2f0, 0x0f8, 0x00, 0, 0, PAD_CTL_SRE_FAST),
-	MX25_PAD_LD12__FEC_RDATA3		= IOMUX_PAD(0x2f0, 0x0f8, 0x05, 0x510, 1, NO_PAD_CTRL),
-
-	MX25_PAD_LD13__LD13			= IOMUX_PAD(0x2f4, 0x0fc, 0x00, 0, 0, PAD_CTL_SRE_FAST),
-	MX25_PAD_LD13__FEC_TDATA2		= IOMUX_PAD(0x2f4, 0x0fc, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_LD14__LD14			= IOMUX_PAD(0x2f8, 0x100, 0x00, 0, 0, PAD_CTL_SRE_FAST),
-	MX25_PAD_LD14__FEC_TDATA3		= IOMUX_PAD(0x2f8, 0x100, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_LD15__LD15			= IOMUX_PAD(0x2fc, 0x104, 0x00, 0, 0, PAD_CTL_SRE_FAST),
-	MX25_PAD_LD15__FEC_RX_CLK		= IOMUX_PAD(0x2fc, 0x104, 0x05, 0x514, 1, NO_PAD_CTRL),
-
-	MX25_PAD_HSYNC__HSYNC			= IOMUX_PAD(0x300, 0x108, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_HSYNC__GPIO_1_22		= IOMUX_PAD(0x300, 0x108, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_VSYNC__VSYNC			= IOMUX_PAD(0x304, 0x10c, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_VSYNC__GPIO_1_23		= IOMUX_PAD(0x304, 0x10c, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_LSCLK__LSCLK			= IOMUX_PAD(0x308, 0x110, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_LSCLK__GPIO_1_24		= IOMUX_PAD(0x308, 0x110, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_OE_ACD__OE_ACD			= IOMUX_PAD(0x30c, 0x114, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_OE_ACD__GPIO_1_25		= IOMUX_PAD(0x30c, 0x114, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_CONTRAST__CONTRAST		= IOMUX_PAD(0x310, 0x118, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CONTRAST__PWM4_PWMO		= IOMUX_PAD(0x310, 0x118, 0x04, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CONTRAST__FEC_CRS		= IOMUX_PAD(0x310, 0x118, 0x05, 0x508, 1, NO_PAD_CTRL),
-
-	MX25_PAD_PWM__PWM			= IOMUX_PAD(0x314, 0x11c, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_PWM__GPIO_1_26			= IOMUX_PAD(0x314, 0x11c, 0x05, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_PWM__USBH2_OC			= IOMUX_PAD(0x314, 0x11c, 0x06, 0x580, 1, PAD_CTL_PUS_100K_UP),
-
-	MX25_PAD_CSI_D2__CSI_D2			= IOMUX_PAD(0x318, 0x120, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CSI_D2__UART5_RXD_MUX		= IOMUX_PAD(0x318, 0x120, 0x01, 0x578, 1, NO_PAD_CTRL),
-	MX25_PAD_CSI_D2__GPIO_1_27		= IOMUX_PAD(0x318, 0x120, 0x05, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CSI_D2__CSPI3_MOSI		= IOMUX_PAD(0x318, 0x120, 0x07, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_CSI_D3__CSI_D3			= IOMUX_PAD(0x31c, 0x124, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CSI_D3__GPIO_1_28		= IOMUX_PAD(0x31c, 0x124, 0x05, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CSI_D3__CSPI3_MISO		= IOMUX_PAD(0x31c, 0x124, 0x07, 0x4b4, 1, NO_PAD_CTRL),
-
-	MX25_PAD_CSI_D4__CSI_D4			= IOMUX_PAD(0x320, 0x128, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CSI_D4__UART5_RTS		= IOMUX_PAD(0x320, 0x128, 0x01, 0x574, 1, NO_PAD_CTRL),
-	MX25_PAD_CSI_D4__GPIO_1_29		= IOMUX_PAD(0x320, 0x128, 0x05, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CSI_D4__CSPI3_SCLK		= IOMUX_PAD(0x320, 0x128, 0x07, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_CSI_D5__CSI_D5			= IOMUX_PAD(0x324, 0x12c, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CSI_D5__GPIO_1_30		= IOMUX_PAD(0x324, 0x12c, 0x05, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CSI_D5__CSPI3_RDY		= IOMUX_PAD(0x324, 0x12c, 0x07, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_CSI_D6__CSI_D6			= IOMUX_PAD(0x328, 0x130, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CSI_D6__GPIO_1_31		= IOMUX_PAD(0x328, 0x130, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_CSI_D7__CSI_D7			= IOMUX_PAD(0x32c, 0x134, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CSI_D7__GPIO_1_6		= IOMUX_PAD(0x32c, 0x134, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_CSI_D8__CSI_D8			= IOMUX_PAD(0x330, 0x138, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CSI_D8__GPIO_1_7		= IOMUX_PAD(0x330, 0x138, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_CSI_D9__CSI_D9			= IOMUX_PAD(0x334, 0x13c, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CSI_D9__GPIO_4_21		= IOMUX_PAD(0x334, 0x13c, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_CSI_MCLK__CSI_MCLK		= IOMUX_PAD(0x338, 0x140, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CSI_MCLK__GPIO_1_8		= IOMUX_PAD(0x338, 0x140, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_CSI_VSYNC__CSI_VSYNC		= IOMUX_PAD(0x33c, 0x144, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CSI_VSYNC__GPIO_1_9		= IOMUX_PAD(0x33c, 0x144, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_CSI_HSYNC__CSI_HSYNC		= IOMUX_PAD(0x340, 0x148, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CSI_HSYNC__GPIO_1_10		= IOMUX_PAD(0x340, 0x148, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_CSI_PIXCLK__CSI_PIXCLK		= IOMUX_PAD(0x344, 0x14c, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CSI_PIXCLK__GPIO_1_11		= IOMUX_PAD(0x344, 0x14c, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_I2C1_CLK__I2C1_CLK		= IOMUX_PAD(0x348, 0x150, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_I2C1_CLK__GPIO_1_12		= IOMUX_PAD(0x348, 0x150, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_I2C1_DAT__I2C1_DAT		= IOMUX_PAD(0x34c, 0x154, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_I2C1_DAT__GPIO_1_13		= IOMUX_PAD(0x34c, 0x154, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_CSPI1_MOSI__CSPI1_MOSI		= IOMUX_PAD(0x350, 0x158, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CSPI1_MOSI__GPIO_1_14		= IOMUX_PAD(0x350, 0x158, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_CSPI1_MISO__CSPI1_MISO		= IOMUX_PAD(0x354, 0x15c, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CSPI1_MISO__GPIO_1_15		= IOMUX_PAD(0x354, 0x15c, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_CSPI1_SS0__CSPI1_SS0		= IOMUX_PAD(0x358, 0x160, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CSPI1_SS0__GPIO_1_16		= IOMUX_PAD(0x358, 0x160, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_CSPI1_SS1__CSPI1_SS1		= IOMUX_PAD(0x35c, 0x164, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CSPI1_SS1__I2C3_DAT		= IOMUX_PAD(0x35c, 0x164, 0x01, 0x528, 1, NO_PAD_CTRL),
-	MX25_PAD_CSPI1_SS1__GPIO_1_17		= IOMUX_PAD(0x35c, 0x164, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_CSPI1_SCLK__CSPI1_SCLK		= IOMUX_PAD(0x360, 0x168, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CSPI1_SCLK__GPIO_1_18		= IOMUX_PAD(0x360, 0x168, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_CSPI1_RDY__CSPI1_RDY		= IOMUX_PAD(0x364, 0x16c, 0x00, 0, 0, PAD_CTL_PKE),
-	MX25_PAD_CSPI1_RDY__GPIO_2_22		= IOMUX_PAD(0x364, 0x16c, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_UART1_RXD__UART1_RXD		= IOMUX_PAD(0x368, 0x170, 0x00, 0, 0, PAD_CTL_PUS_100K_DOWN),
-	MX25_PAD_UART1_RXD__GPIO_4_22		= IOMUX_PAD(0x368, 0x170, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_UART1_TXD__UART1_TXD		= IOMUX_PAD(0x36c, 0x174, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_UART1_TXD__GPIO_4_23		= IOMUX_PAD(0x36c, 0x174, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_UART1_RTS__UART1_RTS		= IOMUX_PAD(0x370, 0x178, 0x00, 0, 0, PAD_CTL_PUS_100K_UP),
-	MX25_PAD_UART1_RTS__CSI_D0		= IOMUX_PAD(0x370, 0x178, 0x01, 0x488, 1, NO_PAD_CTRL),
-	MX25_PAD_UART1_RTS__GPIO_4_24		= IOMUX_PAD(0x370, 0x178, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_UART1_CTS__UART1_CTS		= IOMUX_PAD(0x374, 0x17c, 0x00, 0, 0, PAD_CTL_PUS_100K_UP),
-	MX25_PAD_UART1_CTS__CSI_D1		= IOMUX_PAD(0x374, 0x17c, 0x01, 0x48c, 1, NO_PAD_CTRL),
-	MX25_PAD_UART1_CTS__GPIO_4_25		= IOMUX_PAD(0x374, 0x17c, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_UART2_RXD__UART2_RXD		= IOMUX_PAD(0x378, 0x180, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_UART2_RXD__GPIO_4_26		= IOMUX_PAD(0x378, 0x180, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_UART2_TXD__UART2_TXD		= IOMUX_PAD(0x37c, 0x184, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_UART2_TXD__GPIO_4_27		= IOMUX_PAD(0x37c, 0x184, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_UART2_RTS__UART2_RTS		= IOMUX_PAD(0x380, 0x188, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_UART2_RTS__FEC_COL		= IOMUX_PAD(0x380, 0x188, 0x02, 0x504, 2, NO_PAD_CTRL),
-	MX25_PAD_UART2_RTS__GPIO_4_28		= IOMUX_PAD(0x380, 0x188, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_UART2_CTS__FEC_RX_ER		= IOMUX_PAD(0x384, 0x18c, 0x02, 0x518, 2, NO_PAD_CTRL),
-	MX25_PAD_UART2_CTS__UART2_CTS		= IOMUX_PAD(0x384, 0x18c, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_UART2_CTS__GPIO_4_29		= IOMUX_PAD(0x384, 0x18c, 0x05, 0, 0, NO_PAD_CTRL),
-
-	/*
-	 * Removing the SION bit from MX25_PAD_SD1_CMD__SD1_CMD breaks detecting an SD
-	 * card. According to the i.MX25 reference manual (e.g. Figure 23-2 in IMX25RM
-	 * Rev. 2 from 01/2011) this pin is bidirectional. So it seems to be a silicon
-	 * bug that configuring the SD1_CMD function doesn't enable the input path for
-	 * this pin.
-	 * This might have side effects for other hardware units that are connected to
-	 * that pin and use the respective function as input.
-	 */
-	MX25_PAD_SD1_CMD__SD1_CMD		= IOMUX_PAD(0x388, 0x190, 0x10, 0, 0, PAD_CTL_PUS_47K_UP),
-	MX25_PAD_SD1_CMD__FEC_RDATA2		= IOMUX_PAD(0x388, 0x190, 0x02, 0x50c, 2, NO_PAD_CTRL),
-	MX25_PAD_SD1_CMD__GPIO_2_23		= IOMUX_PAD(0x388, 0x190, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_SD1_CLK__SD1_CLK		= IOMUX_PAD(0x38c, 0x194, 0x00, 0, 0, PAD_CTL_PUS_47K_UP),
-	MX25_PAD_SD1_CLK__FEC_RDATA3		= IOMUX_PAD(0x38c, 0x194, 0x02, 0x510, 2, NO_PAD_CTRL),
-	MX25_PAD_SD1_CLK__GPIO_2_24		= IOMUX_PAD(0x38c, 0x194, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_SD1_DATA0__SD1_DATA0		= IOMUX_PAD(0x390, 0x198, 0x00, 0, 0, PAD_CTL_PUS_47K_UP),
-	MX25_PAD_SD1_DATA0__GPIO_2_25		= IOMUX_PAD(0x390, 0x198, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_SD1_DATA1__SD1_DATA1		= IOMUX_PAD(0x394, 0x19c, 0x00, 0, 0, PAD_CTL_PUS_47K_UP),
-	MX25_PAD_SD1_DATA1__AUD7_RXD		= IOMUX_PAD(0x394, 0x19c, 0x03, 0x478, 0, NO_PAD_CTRL),
-	MX25_PAD_SD1_DATA1__GPIO_2_26		= IOMUX_PAD(0x394, 0x19c, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_SD1_DATA2__SD1_DATA2		= IOMUX_PAD(0x398, 0x1a0, 0x00, 0, 0, PAD_CTL_PUS_47K_UP),
-	MX25_PAD_SD1_DATA2__FEC_RX_CLK		= IOMUX_PAD(0x398, 0x1a0, 0x05, 0x514, 2, NO_PAD_CTRL),
-	MX25_PAD_SD1_DATA2__GPIO_2_27		= IOMUX_PAD(0x398, 0x1a0, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_SD1_DATA3__SD1_DATA3		= IOMUX_PAD(0x39c, 0x1a4, 0x00, 0, 0, PAD_CTL_PUS_47K_UP),
-	MX25_PAD_SD1_DATA3__FEC_CRS		= IOMUX_PAD(0x39c, 0x1a4, 0x00, 0x508, 2, NO_PAD_CTRL),
-	MX25_PAD_SD1_DATA3__GPIO_2_28		= IOMUX_PAD(0x39c, 0x1a4, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_KPP_ROW0__KPP_ROW0		= IOMUX_PAD(0x3a0, 0x1a8, 0x00, 0, 0, MX25_KPP_ROW_PAD_CTRL),
-	MX25_PAD_KPP_ROW0__GPIO_2_29		= IOMUX_PAD(0x3a0, 0x1a8, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_KPP_ROW1__KPP_ROW1		= IOMUX_PAD(0x3a4, 0x1ac, 0x00, 0, 0, MX25_KPP_ROW_PAD_CTRL),
-	MX25_PAD_KPP_ROW1__GPIO_2_30		= IOMUX_PAD(0x3a4, 0x1ac, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_KPP_ROW2__KPP_ROW2		= IOMUX_PAD(0x3a8, 0x1b0, 0x00, 0, 0, MX25_KPP_ROW_PAD_CTRL),
-	MX25_PAD_KPP_ROW2__CSI_D0		= IOMUX_PAD(0x3a8, 0x1b0, 0x03, 0x488, 2, NO_PAD_CTRL),
-	MX25_PAD_KPP_ROW2__GPIO_2_31		= IOMUX_PAD(0x3a8, 0x1b0, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_KPP_ROW3__KPP_ROW3		= IOMUX_PAD(0x3ac, 0x1b4, 0x00, 0, 0, MX25_KPP_ROW_PAD_CTRL),
-	MX25_PAD_KPP_ROW3__CSI_LD1		= IOMUX_PAD(0x3ac, 0x1b4, 0x03, 0x48c, 2, NO_PAD_CTRL),
-	MX25_PAD_KPP_ROW3__GPIO_3_0		= IOMUX_PAD(0x3ac, 0x1b4, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_KPP_COL0__KPP_COL0		= IOMUX_PAD(0x3b0, 0x1b8, 0x00, 0, 0, MX25_KPP_COL_PAD_CTRL),
-	MX25_PAD_KPP_COL0__UART4_RXD_MUX	= IOMUX_PAD(0x3b0, 0x1b8, 0x01, 0x570, 1, NO_PAD_CTRL),
-	MX25_PAD_KPP_COL0__AUD5_TXD		= IOMUX_PAD(0x3b0, 0x1b8, 0x02, 0, 0, PAD_CTL_PUS_100K_UP),
-	MX25_PAD_KPP_COL0__GPIO_3_1		= IOMUX_PAD(0x3b0, 0x1b8, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_KPP_COL1__KPP_COL1		= IOMUX_PAD(0x3b4, 0x1bc, 0x00, 0, 0, MX25_KPP_COL_PAD_CTRL),
-	MX25_PAD_KPP_COL1__UART4_TXD_MUX	= IOMUX_PAD(0x3b4, 0x1bc, 0x01, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_KPP_COL1__AUD5_RXD		= IOMUX_PAD(0x3b4, 0x1bc, 0x02, 0, 0, PAD_CTL_PUS_100K_UP),
-	MX25_PAD_KPP_COL1__GPIO_3_2		= IOMUX_PAD(0x3b4, 0x1bc, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_KPP_COL2__KPP_COL2		= IOMUX_PAD(0x3b8, 0x1c0, 0x00, 0, 0, MX25_KPP_COL_PAD_CTRL),
-	MX25_PAD_KPP_COL2__UART4_RTS		= IOMUX_PAD(0x3b8, 0x1c0, 0x01, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_KPP_COL2__AUD5_TXC		= IOMUX_PAD(0x3b8, 0x1c0, 0x02, 0, 0, PAD_CTL_PUS_100K_UP),
-	MX25_PAD_KPP_COL2__GPIO_3_3		= IOMUX_PAD(0x3b8, 0x1c0, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_KPP_COL3__KPP_COL3		= IOMUX_PAD(0x3bc, 0x1c4, 0x00, 0, 0, MX25_KPP_COL_PAD_CTRL),
-	MX25_PAD_KPP_COL3__UART4_CTS		= IOMUX_PAD(0x3bc, 0x1c4, 0x01, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_KPP_COL3__AUD5_TXFS		= IOMUX_PAD(0x3bc, 0x1c4, 0x02, 0, 0, PAD_CTL_PUS_100K_UP),
-	MX25_PAD_KPP_COL3__GPIO_3_4		= IOMUX_PAD(0x3bc, 0x1c4, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_FEC_MDC__FEC_MDC		= IOMUX_PAD(0x3c0, 0x1c8, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_FEC_MDC__AUD4_TXD		= IOMUX_PAD(0x3c0, 0x1c8, 0x02, 0x464, 1, NO_PAD_CTRL),
-	MX25_PAD_FEC_MDC__GPIO_3_5		= IOMUX_PAD(0x3c0, 0x1c8, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_FEC_MDIO__FEC_MDIO		= IOMUX_PAD(0x3c4, 0x1cc, 0x00, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_22K_UP),
-	MX25_PAD_FEC_MDIO__AUD4_RXD		= IOMUX_PAD(0x3c4, 0x1cc, 0x02, 0x460, 1, NO_PAD_CTRL),
-	MX25_PAD_FEC_MDIO__GPIO_3_6		= IOMUX_PAD(0x3c4, 0x1cc, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_FEC_TDATA0__FEC_TDATA0		= IOMUX_PAD(0x3c8, 0x1d0, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_FEC_TDATA0__GPIO_3_7		= IOMUX_PAD(0x3c8, 0x1d0, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_FEC_TDATA1__FEC_TDATA1		= IOMUX_PAD(0x3cc, 0x1d4, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_FEC_TDATA1__AUD4_TXFS		= IOMUX_PAD(0x3cc, 0x1d4, 0x02, 0x474, 1, NO_PAD_CTRL),
-	MX25_PAD_FEC_TDATA1__GPIO_3_8		= IOMUX_PAD(0x3cc, 0x1d4, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_FEC_TX_EN__FEC_TX_EN		= IOMUX_PAD(0x3d0, 0x1d8, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_FEC_TX_EN__GPIO_3_9		= IOMUX_PAD(0x3d0, 0x1d8, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_FEC_RDATA0__FEC_RDATA0		= IOMUX_PAD(0x3d4, 0x1dc, 0x00, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
-	MX25_PAD_FEC_RDATA0__GPIO_3_10		= IOMUX_PAD(0x3d4, 0x1dc, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_FEC_RDATA1__FEC_RDATA1		= IOMUX_PAD(0x3d8, 0x1e0, 0x00, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
-	MX25_PAD_FEC_RDATA1__GPIO_3_11		= IOMUX_PAD(0x3d8, 0x1e0, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_FEC_RX_DV__FEC_RX_DV		= IOMUX_PAD(0x3dc, 0x1e4, 0x00, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
-	MX25_PAD_FEC_RX_DV__CAN2_RX		= IOMUX_PAD(0x3dc, 0x1e4, 0x04, 0x484, 0, PAD_CTL_PUS_22K_UP),
-	MX25_PAD_FEC_RX_DV__GPIO_3_12		= IOMUX_PAD(0x3dc, 0x1e4, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_FEC_TX_CLK__FEC_TX_CLK		= IOMUX_PAD(0x3e0, 0x1e8, 0x00, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
-	MX25_PAD_FEC_TX_CLK__GPIO_3_13		= IOMUX_PAD(0x3e0, 0x1e8, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_RTCK__RTCK			= IOMUX_PAD(0x3e4, 0x1ec, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_RTCK__OWIRE			= IOMUX_PAD(0x3e4, 0x1ec, 0x01, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_RTCK__GPIO_3_14		= IOMUX_PAD(0x3e4, 0x1ec, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_DE_B__DE_B			= IOMUX_PAD(0x3ec, 0x1f0, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_DE_B__GPIO_2_20		= IOMUX_PAD(0x3ec, 0x1f0, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_TDO__TDO			= IOMUX_PAD(0x3e8, 0x000, 0x00, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_GPIO_A__GPIO_A			= IOMUX_PAD(0x3f0, 0x1f4, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_GPIO_A__CAN1_TX		= IOMUX_PAD(0x3f0, 0x1f4, 0x06, 0, 0, PAD_CTL_PUS_22K_UP),
-	MX25_PAD_GPIO_A__USBOTG_PWR		= IOMUX_PAD(0x3f0, 0x1f4, 0x02, 0, 0, PAD_CTL_PKE),
-
-	MX25_PAD_GPIO_B__GPIO_B			= IOMUX_PAD(0x3f4, 0x1f8, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_GPIO_B__CAN1_RX		= IOMUX_PAD(0x3f4, 0x1f8, 0x06, 0x480, 1, PAD_CTL_PUS_22K_UP),
-	MX25_PAD_GPIO_B__USBOTG_OC		= IOMUX_PAD(0x3f4, 0x1f8, 0x02, 0x57c, 1, PAD_CTL_PUS_100K_UP),
-
-	MX25_PAD_GPIO_C__GPIO_C			= IOMUX_PAD(0x3f8, 0x1fc, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_GPIO_C__CAN2_TX		= IOMUX_PAD(0x3f8, 0x1fc, 0x06, 0, 0, PAD_CTL_PUS_22K_UP),
-
-	MX25_PAD_GPIO_D__GPIO_D			= IOMUX_PAD(0x3fc, 0x200, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_GPIO_E__LD16			= IOMUX_PAD(0x400, 0x204, 0x02, 0, 0, PAD_CTL_SRE_FAST),
-	MX25_PAD_GPIO_D__CAN2_RX		= IOMUX_PAD(0x3fc, 0x200, 0x06, 0x484, 1, PAD_CTL_PUS_22K_UP),
-
-	MX25_PAD_GPIO_E__GPIO_E			= IOMUX_PAD(0x400, 0x204, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_GPIO_F__LD17			= IOMUX_PAD(0x404, 0x208, 0x02, 0, 0, PAD_CTL_SRE_FAST),
-	MX25_PAD_GPIO_E__I2C3_CLK		= IOMUX_PAD(0x400, 0x204, 0x01, 0x524, 2, NO_PAD_CTRL),
-	MX25_PAD_GPIO_E__AUD7_TXD		= IOMUX_PAD(0x400, 0x204, 0x04, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_GPIO_F__GPIO_F			= IOMUX_PAD(0x404, 0x208, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_GPIO_F__AUD7_TXC		= IOMUX_PAD(0x404, 0x208, 0x04, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_EXT_ARMCLK__EXT_ARMCLK		= IOMUX_PAD(0x000, 0x20c, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_EXT_ARMCLK__GPIO_3_15		= IOMUX_PAD(0x000, 0x20c, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK	= IOMUX_PAD(0x000, 0x210, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_UPLL_BYPCLK__GPIO_3_16		= IOMUX_PAD(0x000, 0x210, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_VSTBY_REQ__VSTBY_REQ		= IOMUX_PAD(0x408, 0x214, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_VSTBY_REQ__AUD7_TXFS		= IOMUX_PAD(0x408, 0x214, 0x04, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_VSTBY_REQ__GPIO_3_17		= IOMUX_PAD(0x408, 0x214, 0x05, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_VSTBY_ACK__VSTBY_ACK		= IOMUX_PAD(0x40c, 0x218, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_VSTBY_ACK__GPIO_3_18		= IOMUX_PAD(0x40c, 0x218, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_POWER_FAIL__POWER_FAIL		= IOMUX_PAD(0x410, 0x21c, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_POWER_FAIL__AUD7_RXD		= IOMUX_PAD(0x410, 0x21c, 0x04, 0x478, 1, NO_PAD_CTRL),
-	MX25_PAD_POWER_FAIL__GPIO_3_19		= IOMUX_PAD(0x410, 0x21c, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_CLKO__CLKO			= IOMUX_PAD(0x414, 0x220, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CLKO__GPIO_2_21		= IOMUX_PAD(0x414, 0x220, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_BOOT_MODE0__BOOT_MODE0		= IOMUX_PAD(0x000, 0x224, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_BOOT_MODE0__GPIO_4_30		= IOMUX_PAD(0x000, 0x224, 0x05, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_BOOT_MODE1__BOOT_MODE1		= IOMUX_PAD(0x000, 0x228, 0x00, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_BOOT_MODE1__GPIO_4_31		= IOMUX_PAD(0x000, 0x228, 0x05, 0, 0, NO_PAD_CTRL),
-
-	MX25_PAD_CTL_GRP_DVS_MISC		= IOMUX_PAD(0x418, 0x000, 0, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CTL_GRP_DSE_FEC		= IOMUX_PAD(0x41c, 0x000, 0, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CTL_GRP_DVS_JTAG		= IOMUX_PAD(0x420, 0x000, 0, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CTL_GRP_DSE_NFC		= IOMUX_PAD(0x424, 0x000, 0, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CTL_GRP_DSE_CSI		= IOMUX_PAD(0x428, 0x000, 0, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CTL_GRP_DSE_WEIM		= IOMUX_PAD(0x42c, 0x000, 0, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CTL_GRP_DSE_DDR		= IOMUX_PAD(0x430, 0x000, 0, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CTL_GRP_DVS_CRM		= IOMUX_PAD(0x434, 0x000, 0, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CTL_GRP_DSE_KPP		= IOMUX_PAD(0x438, 0x000, 0, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CTL_GRP_DSE_SDHC1		= IOMUX_PAD(0x43c, 0x000, 0, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CTL_GRP_DSE_LCD		= IOMUX_PAD(0x440, 0x000, 0, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CTL_GRP_DSE_UART		= IOMUX_PAD(0x444, 0x000, 0, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CTL_GRP_DVS_NFC		= IOMUX_PAD(0x448, 0x000, 0, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CTL_GRP_DVS_CSI		= IOMUX_PAD(0x44c, 0x000, 0, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CTL_GRP_DSE_CSPI1		= IOMUX_PAD(0x450, 0x000, 0, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CTL_GRP_DDRTYPE		= IOMUX_PAD(0x454, 0x000, 0, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CTL_GRP_DVS_SDHC1		= IOMUX_PAD(0x458, 0x000, 0, 0, 0, NO_PAD_CTRL),
-	MX25_PAD_CTL_GRP_DVS_LCD		= IOMUX_PAD(0x45c, 0x000, 0, 0, 0, NO_PAD_CTRL),
-};
-
-#endif /* __IOMUX_MX25_H__ */
--- a/arch/arm/include/asm/arch-mx25/macro.h
+++ b/arch/arm/include/asm/arch-mx25/macro.h
@ -1,90 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2011
- * Matthias Weisser <weisserm@arcor.de>
- *
- * (C) Copyright 2009 DENX Software Engineering
- * Author: John Rigby <jrigby@gmail.com>
- *
- * Common asm macros for imx25
- */
-
-#ifndef __ASM_ARM_ARCH_MACRO_H__
-#define __ASM_ARM_ARCH_MACRO_H__
-#ifdef __ASSEMBLY__
-
-#include <asm/arch/imx-regs.h>
-#include <generated/asm-offsets.h>
-#include <asm/macro.h>
-
-/*
- * AIPS setup - Only setup MPROTx registers.
- * The PACR default values are good.
- *
- * Default argument values:
- *  - MPR: Set all MPROTx to be non-bufferable, trusted for R/W, not forced to
- *    user-mode.
- */
-.macro init_aips mpr=0x77777777
-	ldr	r0, =IMX_AIPS1_BASE
-	ldr	r1, =\mpr
-	str	r1, [r0, #AIPS_MPR_0_7]
-	str	r1, [r0, #AIPS_MPR_8_15]
-	ldr	r2, =IMX_AIPS2_BASE
-	str	r1, [r2, #AIPS_MPR_0_7]
-	str	r1, [r2, #AIPS_MPR_8_15]
-.endm
-
-/*
- * MAX (Multi-Layer AHB Crossbar Switch) setup
- *
- * Default argument values:
- *  - MPR: priority is IAHB > DAHB > USBOTG > RTIC > eSDHC2/SDMA
- *  - SGPCR: always park on last master
- *  - MGPCR: restore default values
- */
-.macro init_max mpr=0x00043210, sgpcr=0x00000010, mgpcr=0x00000000
-	ldr	r0, =IMX_MAX_BASE
-	ldr	r1, =\mpr
-	str	r1, [r0, #MAX_MPR0]	/* for S0 */
-	str	r1, [r0, #MAX_MPR1]	/* for S1 */
-	str	r1, [r0, #MAX_MPR2]	/* for S2 */
-	str	r1, [r0, #MAX_MPR3]	/* for S3 */
-	str	r1, [r0, #MAX_MPR4]	/* for S4 */
-	ldr	r1, =\sgpcr
-	str	r1, [r0, #MAX_SGPCR0]	/* for S0 */
-	str	r1, [r0, #MAX_SGPCR1]	/* for S1 */
-	str	r1, [r0, #MAX_SGPCR2]	/* for S2 */
-	str	r1, [r0, #MAX_SGPCR3]	/* for S3 */
-	str	r1, [r0, #MAX_SGPCR4]	/* for S4 */
-	ldr	r1, =\mgpcr
-	str	r1, [r0, #MAX_MGPCR0]	/* for M0 */
-	str	r1, [r0, #MAX_MGPCR1]	/* for M1 */
-	str	r1, [r0, #MAX_MGPCR2]	/* for M2 */
-	str	r1, [r0, #MAX_MGPCR3]	/* for M3 */
-	str	r1, [r0, #MAX_MGPCR4]	/* for M4 */
-.endm
-
-/*
- * M3IF setup
- *
- * Default argument values:
- *  - CTL:
- * MRRP[0] = LCDC on priority list (1 << 0)			= 0x00000001
- * MRRP[1] = MAX1 not on priority list (0 << 1)			= 0x00000000
- * MRRP[2] = MAX0 not on priority list (0 << 2)			= 0x00000000
- * MRRP[3] = USBH not on priority list (0 << 3)			= 0x00000000
- * MRRP[4] = SDMA not on priority list (0 << 4)			= 0x00000000
- * MRRP[5] = eSDHC1/ATA/FEC not on priority list (0 << 5)	= 0x00000000
- * MRRP[6] = LCDC/SLCDC/MAX2 not on priority list (0 << 6)	= 0x00000000
- * MRRP[7] = CSI not on priority list (0 << 7)			= 0x00000000
- *								------------
- *								  0x00000001
- */
-.macro init_m3if ctl=0x00000001
-	/* M3IF Control Register (M3IFCTL) */
-	write32	IMX_M3IF_CTRL_BASE, \ctl
-.endm
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_ARM_ARCH_MACRO_H__ */
--- a/arch/arm/include/asm/arch-mx35/clock.h
+++ b/arch/arm/include/asm/arch-mx35/clock.h
@ -1,67 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2011
- * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
- */
-
-#ifndef __ASM_ARCH_CLOCK_H
-#define __ASM_ARCH_CLOCK_H
-
-#ifdef CONFIG_MX35_HCLK_FREQ
-#define MXC_HCLK	CONFIG_MX35_HCLK_FREQ
-#else
-#define MXC_HCLK	24000000
-#endif
-
-#ifdef CONFIG_MX35_CLK32
-#define MXC_CLK32	CONFIG_MX35_CLK32
-#else
-#define MXC_CLK32	32768
-#endif
-
-enum mxc_clock {
-	MXC_ARM_CLK,
-	MXC_AHB_CLK,
-	MXC_IPG_CLK,
-	MXC_IPG_PERCLK,
-	MXC_UART_CLK,
-	MXC_ESDHC1_CLK,
-	MXC_ESDHC2_CLK,
-	MXC_ESDHC3_CLK,
-	MXC_USB_CLK,
-	MXC_CSPI_CLK,
-	MXC_FEC_CLK,
-	MXC_I2C_CLK,
-};
-
-enum mxc_main_clock {
-	CPU_CLK,
-	AHB_CLK,
-	IPG_CLK,
-	IPG_PER_CLK,
-	NFC_CLK,
-	USB_CLK,
-	HSP_CLK,
-};
-
-enum mxc_peri_clock {
-	UART1_BAUD,
-	UART2_BAUD,
-	UART3_BAUD,
-	SSI1_BAUD,
-	SSI2_BAUD,
-	CSI_BAUD,
-	MSHC_CLK,
-	ESDHC1_CLK,
-	ESDHC2_CLK,
-	ESDHC3_CLK,
-	SPDIF_CLK,
-	SPI1_CLK,
-	SPI2_CLK,
-};
-
-u32 imx_get_uartclk(void);
-u32 imx_get_fecclk(void);
-unsigned int mxc_get_clock(enum mxc_clock clk);
-
-#endif /* __ASM_ARCH_CLOCK_H */
--- a/arch/arm/include/asm/arch-mx35/crm_regs.h
+++ b/arch/arm/include/asm/arch-mx35/crm_regs.h
@ -1,243 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2004-2009 Freescale Semiconductor, Inc.
- */
-
-#ifndef __CPU_ARM1136_MX35_CRM_REGS_H__
-#define __CPU_ARM1136_MX35_CRM_REGS_H__
-
-/* Register bit definitions */
-#define MXC_CCM_CCMR_WFI                        (1 << 30)
-#define MXC_CCM_CCMR_STBY_EXIT_SRC              (1 << 29)
-#define MXC_CCM_CCMR_VSTBY                      (1 << 28)
-#define MXC_CCM_CCMR_WBEN                       (1 << 27)
-#define MXC_CCM_CCMR_VOL_RDY_CNT_OFFSET        20
-#define MXC_CCM_CCMR_VOL_RDY_CNT_MASK          (0xF << 20)
-#define MXC_CCM_CCMR_ROMW_OFFSET               18
-#define MXC_CCM_CCMR_ROMW_MASK                 (0x3 << 18)
-#define MXC_CCM_CCMR_RAMW_OFFSET               16
-#define MXC_CCM_CCMR_RAMW_MASK                 (0x3 << 16)
-#define MXC_CCM_CCMR_LPM_OFFSET                 14
-#define MXC_CCM_CCMR_LPM_MASK                   (0x3 << 14)
-#define MXC_CCM_CCMR_UPE                        (1 << 9)
-#define MXC_CCM_CCMR_MPE                        (1 << 3)
-
-#define MXC_CCM_PDR0_PER_SEL			(1 << 26)
-#define MXC_CCM_PDR0_IPU_HND_BYP                (1 << 23)
-#define MXC_CCM_PDR0_HSP_PODF_OFFSET            20
-#define MXC_CCM_PDR0_HSP_PODF_MASK              (0x3 << 20)
-#define MXC_CCM_PDR0_CON_MUX_DIV_OFFSET		16
-#define MXC_CCM_PDR0_CON_MUX_DIV_MASK           (0xF << 16)
-#define MXC_CCM_PDR0_CKIL_SEL			(1 << 15)
-#define MXC_CCM_PDR0_PER_PODF_OFFSET            12
-#define MXC_CCM_PDR0_PER_PODF_MASK              (0x7 << 12)
-#define MXC_CCM_PDR0_AUTO_MUX_DIV_OFFSET        9
-#define MXC_CCM_PDR0_AUTO_MUX_DIV_MASK          (0x7 << 9)
-#define MXC_CCM_PDR0_AUTO_CON	                0x1
-
-#define MXC_CCM_PDR1_MSHC_PRDF_OFFSET           28
-#define MXC_CCM_PDR1_MSHC_PRDF_MASK             (0x7 << 28)
-#define MXC_CCM_PDR1_MSHC_PODF_OFFSET           22
-#define MXC_CCM_PDR1_MSHC_PODF_MASK             (0x3F << 22)
-#define MXC_CCM_PDR1_MSHC_M_U			(1 << 7)
-
-#define MXC_CCM_PDR2_SSI2_PRDF_OFFSET           27
-#define MXC_CCM_PDR2_SSI2_PRDF_MASK             (0x7 << 27)
-#define MXC_CCM_PDR2_SSI1_PRDF_OFFSET           24
-#define MXC_CCM_PDR2_SSI1_PRDF_MASK             (0x7 << 24)
-#define MXC_CCM_PDR2_CSI_PODF_OFFSET            16
-#define MXC_CCM_PDR2_CSI_PODF_MASK              (0x3F << 16)
-#define MXC_CCM_PDR2_SSI2_PODF_OFFSET           8
-#define MXC_CCM_PDR2_SSI2_PODF_MASK             (0x3F << 8)
-#define MXC_CCM_PDR2_CSI_M_U			(1 << 7)
-#define MXC_CCM_PDR2_SSI_M_U			(1 << 6)
-#define MXC_CCM_PDR2_SSI1_PODF_OFFSET           0
-#define MXC_CCM_PDR2_SSI1_PODF_MASK             (0x3F)
-
-#define MXC_CCM_PDR3_SPDIF_PRDF_OFFSET          29
-#define MXC_CCM_PDR3_SPDIF_PRDF_MASK            (0x7 << 29)
-#define MXC_CCM_PDR3_SPDIF_PODF_OFFSET          23
-#define MXC_CCM_PDR3_SPDIF_PODF_MASK            (0x3F << 23)
-#define MXC_CCM_PDR3_SPDIF_M_U			(1 << 22)
-#define MXC_CCM_PDR3_ESDHC3_PODF_OFFSET         16
-#define MXC_CCM_PDR3_ESDHC3_PODF_MASK           (0x3F << 16)
-#define MXC_CCM_PDR3_UART_M_U			(1 << 14)
-#define MXC_CCM_PDR3_ESDHC2_PODF_OFFSET         8
-#define MXC_CCM_PDR3_ESDHC2_PODF_MASK           (0x3F << 8)
-#define MXC_CCM_PDR3_ESDHC_M_U			(1 << 6)
-#define MXC_CCM_PDR3_ESDHC1_PODF_OFFSET         0
-#define MXC_CCM_PDR3_ESDHC1_PODF_MASK           (0x3F)
-
-#define MXC_CCM_PDR4_NFC_PODF_OFFSET		28
-#define MXC_CCM_PDR4_NFC_PODF_MASK		(0xF << 28)
-#define MXC_CCM_PDR4_USB_PODF_OFFSET		22
-#define MXC_CCM_PDR4_USB_PODF_MASK		(0x3F << 22)
-#define MXC_CCM_PDR4_PER0_PODF_OFFSET		16
-#define MXC_CCM_PDR4_PER0_PODF_MASK		(0x3F << 16)
-#define MXC_CCM_PDR4_UART_PODF_OFFSET		10
-#define MXC_CCM_PDR4_UART_PODF_MASK		(0x3F << 10)
-#define MXC_CCM_PDR4_USB_M_U			(1 << 9)
-
-/* Bit definitions for RCSR */
-#define MXC_CCM_RCSR_BUS_WIDTH			(1 << 29)
-#define MXC_CCM_RCSR_BUS_16BIT			(1 << 29)
-#define MXC_CCM_RCSR_PAGE_SIZE			(3 << 27)
-#define MXC_CCM_RCSR_PAGE_512			(0 << 27)
-#define MXC_CCM_RCSR_PAGE_2K			(1 << 27)
-#define MXC_CCM_RCSR_PAGE_4K1			(2 << 27)
-#define MXC_CCM_RCSR_PAGE_4K2			(3 << 27)
-#define MXC_CCM_RCSR_SOFT_RESET			(1 << 15)
-#define MXC_CCM_RCSR_NF16B			(1 << 14)
-#define MXC_CCM_RCSR_NFC_4K			(1 << 9)
-#define MXC_CCM_RCSR_NFC_FMS			(1 << 8)
-
-/* Bit definitions for both MCU, PERIPHERAL PLL control registers */
-#define MXC_CCM_PCTL_BRM                        0x80000000
-#define MXC_CCM_PCTL_PD_OFFSET                  26
-#define MXC_CCM_PCTL_PD_MASK                    (0xF << 26)
-#define MXC_CCM_PCTL_MFD_OFFSET                 16
-#define MXC_CCM_PCTL_MFD_MASK                   (0x3FF << 16)
-#define MXC_CCM_PCTL_MFI_OFFSET                 10
-#define MXC_CCM_PCTL_MFI_MASK                   (0xF << 10)
-#define MXC_CCM_PCTL_MFN_OFFSET                 0
-#define MXC_CCM_PCTL_MFN_MASK                   0x3FF
-
-/* Bit definitions for Audio clock mux register*/
-#define MXC_CCM_ACMR_ESAI_CLK_SEL_OFFSET	12
-#define MXC_CCM_ACMR_ESAI_CLK_SEL_MASK		(0xF << 12)
-#define MXC_CCM_ACMR_SPDIF_CLK_SEL_OFFSET	8
-#define MXC_CCM_ACMR_SPDIF_CLK_SEL_MASK		(0xF << 8)
-#define MXC_CCM_ACMR_SSI1_CLK_SEL_OFFSET	4
-#define MXC_CCM_ACMR_SSI1_CLK_SEL_MASK		(0xF << 4)
-#define MXC_CCM_ACMR_SSI2_CLK_SEL_OFFSET	0
-#define MXC_CCM_ACMR_SSI2_CLK_SEL_MASK		(0xF << 0)
-
-/* Bit definitions for Clock gating Register*/
-#define MXC_CCM_CGR_CG_MASK			0x3
-#define MXC_CCM_CGR_CG_OFF			0x0
-#define MXC_CCM_CGR_CG_RUN_ON			0x1
-#define MXC_CCM_CGR_CG_RUN_WAIT_ON		0x2
-#define MXC_CCM_CGR_CG_ON			0x3
-
-#define MXC_CCM_CGR0_ASRC_OFFSET		0
-#define MXC_CCM_CGR0_ASRC_MASK			(0x3 << 0)
-#define MXC_CCM_CGR0_ATA_OFFSET			2
-#define MXC_CCM_CGR0_ATA_MASK			(0x3 << 2)
-#define MXC_CCM_CGR0_CAN1_OFFSET		6
-#define MXC_CCM_CGR0_CAN1_MASK			(0x3 << 6)
-#define MXC_CCM_CGR0_CAN2_OFFSET		8
-#define MXC_CCM_CGR0_CAN2_MASK			(0x3 << 8)
-#define MXC_CCM_CGR0_CSPI1_OFFSET		10
-#define MXC_CCM_CGR0_CSPI1_MASK			(0x3 << 10)
-#define MXC_CCM_CGR0_CSPI2_OFFSET		12
-#define MXC_CCM_CGR0_CSPI2_MASK			(0x3 << 12)
-#define MXC_CCM_CGR0_ECT_OFFSET			14
-#define MXC_CCM_CGR0_ECT_MASK			(0x3 << 14)
-#define MXC_CCM_CGR0_EDIO_OFFSET		16
-#define MXC_CCM_CGR0_EDIO_MASK			(0x3 << 16)
-#define MXC_CCM_CGR0_EMI_OFFSET			18
-#define MXC_CCM_CGR0_EMI_MASK			(0x3 << 18)
-#define MXC_CCM_CGR0_EPIT1_OFFSET		20
-#define MXC_CCM_CGR0_EPIT1_MASK			(0x3 << 20)
-#define MXC_CCM_CGR0_EPIT2_OFFSET		22
-#define MXC_CCM_CGR0_EPIT2_MASK			(0x3 << 22)
-#define MXC_CCM_CGR0_ESAI_OFFSET		24
-#define MXC_CCM_CGR0_ESAI_MASK			(0x3 << 24)
-#define MXC_CCM_CGR0_ESDHC1_OFFSET		26
-#define MXC_CCM_CGR0_ESDHC1_MASK		(0x3 << 26)
-#define MXC_CCM_CGR0_ESDHC2_OFFSET		28
-#define MXC_CCM_CGR0_ESDHC2_MASK		(0x3 << 28)
-#define MXC_CCM_CGR0_ESDHC3_OFFSET		30
-#define MXC_CCM_CGR0_ESDHC3_MASK		(0x3 << 30)
-
-#define MXC_CCM_CGR1_FEC_OFFSET			0
-#define MXC_CCM_CGR1_FEC_MASK			(0x3 << 0)
-#define MXC_CCM_CGR1_GPIO1_OFFSET		2
-#define MXC_CCM_CGR1_GPIO1_MASK			(0x3 << 2)
-#define MXC_CCM_CGR1_GPIO2_OFFSET		4
-#define MXC_CCM_CGR1_GPIO2_MASK			(0x3 << 4)
-#define MXC_CCM_CGR1_GPIO3_OFFSET		6
-#define MXC_CCM_CGR1_GPIO3_MASK			(0x3 << 6)
-#define MXC_CCM_CGR1_GPT_OFFSET			8
-#define MXC_CCM_CGR1_GPT_MASK			(0x3 << 8)
-#define MXC_CCM_CGR1_I2C1_OFFSET		10
-#define MXC_CCM_CGR1_I2C1_MASK			(0x3 << 10)
-#define MXC_CCM_CGR1_I2C2_OFFSET		12
-#define MXC_CCM_CGR1_I2C2_MASK			(0x3 << 12)
-#define MXC_CCM_CGR1_I2C3_OFFSET		14
-#define MXC_CCM_CGR1_I2C3_MASK			(0x3 << 14)
-#define MXC_CCM_CGR1_IOMUXC_OFFSET		16
-#define MXC_CCM_CGR1_IOMUXC_MASK		(0x3 << 16)
-#define MXC_CCM_CGR1_IPU_OFFSET			18
-#define MXC_CCM_CGR1_IPU_MASK			(0x3 << 18)
-#define MXC_CCM_CGR1_KPP_OFFSET			20
-#define MXC_CCM_CGR1_KPP_MASK			(0x3 << 20)
-#define MXC_CCM_CGR1_MLB_OFFSET			22
-#define MXC_CCM_CGR1_MLB_MASK			(0x3 << 22)
-#define MXC_CCM_CGR1_MSHC_OFFSET		24
-#define MXC_CCM_CGR1_MSHC_MASK			(0x3 << 24)
-#define MXC_CCM_CGR1_OWIRE_OFFSET		26
-#define MXC_CCM_CGR1_OWIRE_MASK			(0x3 << 26)
-#define MXC_CCM_CGR1_PWM_OFFSET			28
-#define MXC_CCM_CGR1_PWM_MASK			(0x3 << 28)
-#define MXC_CCM_CGR1_RNGC_OFFSET		30
-#define MXC_CCM_CGR1_RNGC_MASK			(0x3 << 30)
-
-#define MXC_CCM_CGR2_RTC_OFFSET			0
-#define MXC_CCM_CGR2_RTC_MASK			(0x3 << 0)
-#define MXC_CCM_CGR2_RTIC_OFFSET		2
-#define MXC_CCM_CGR2_RTIC_MASK			(0x3 << 2)
-#define MXC_CCM_CGR2_SCC_OFFSET			4
-#define MXC_CCM_CGR2_SCC_MASK			(0x3 << 4)
-#define MXC_CCM_CGR2_SDMA_OFFSET		6
-#define MXC_CCM_CGR2_SDMA_MASK			(0x3 << 6)
-#define MXC_CCM_CGR2_SPBA_OFFSET		8
-#define MXC_CCM_CGR2_SPBA_MASK			(0x3 << 8)
-#define MXC_CCM_CGR2_SPDIF_OFFSET		10
-#define MXC_CCM_CGR2_SPDIF_MASK			(0x3 << 10)
-#define MXC_CCM_CGR2_SSI1_OFFSET		12
-#define MXC_CCM_CGR2_SSI1_MASK			(0x3 << 12)
-#define MXC_CCM_CGR2_SSI2_OFFSET		14
-#define MXC_CCM_CGR2_SSI2_MASK			(0x3 << 14)
-#define MXC_CCM_CGR2_UART1_OFFSET		16
-#define MXC_CCM_CGR2_UART1_MASK			(0x3 << 16)
-#define MXC_CCM_CGR2_UART2_OFFSET		18
-#define MXC_CCM_CGR2_UART2_MASK			(0x3 << 18)
-#define MXC_CCM_CGR2_UART3_OFFSET		20
-#define MXC_CCM_CGR2_UART3_MASK			(0x3 << 20)
-#define MXC_CCM_CGR2_USBOTG_OFFSET		22
-#define MXC_CCM_CGR2_USBOTG_MASK		(0x3 << 22)
-#define MXC_CCM_CGR2_WDOG_OFFSET		24
-#define MXC_CCM_CGR2_WDOG_MASK			(0x3 << 24)
-#define MXC_CCM_CGR2_MAX_OFFSET			26
-#define MXC_CCM_CGR2_MAX_MASK			(0x3 << 26)
-#define MXC_CCM_CGR2_MAX_ENABLE			(0x2 << 26)
-#define MXC_CCM_CGR2_AUDMUX_OFFSET		30
-#define MXC_CCM_CGR2_AUDMUX_MASK		(0x3 << 30)
-
-#define MXC_CCM_CGR3_CSI_OFFSET			0
-#define MXC_CCM_CGR3_CSI_MASK			(0x3 << 0)
-#define MXC_CCM_CGR3_IIM_OFFSET			2
-#define MXC_CCM_CGR3_IIM_MASK			(0x3 << 2)
-#define MXC_CCM_CGR3_GPU2D_OFFSET		4
-#define MXC_CCM_CGR3_GPU2D_MASK			(0x3 << 4)
-
-#define MXC_CCM_COSR_CLKOSEL_MASK		0x1F
-#define MXC_CCM_COSR_CLKOSEL_OFFSET		0
-#define MXC_CCM_COSR_CLKOEN			(1 << 5)
-#define MXC_CCM_COSR_CLKOUTDIV_1		(1 << 6)
-#define MXC_CCM_COSR_CLKOUT_DIV_MASK		(0x3F << 10)
-#define MXC_CCM_COSR_CLKOUT_DIV_OFFSET		10
-#define MXC_CCM_COSR_SSI1_RX_SRC_SEL_MASK	(0x3 << 16)
-#define MXC_CCM_COSR_SSI1_RX_SRC_SEL_OFFSET	16
-#define MXC_CCM_COSR_SSI1_TX_SRC_SEL_MASK	(0x3 << 18)
-#define MXC_CCM_COSR_SSI1_TX_SRC_SEL_OFFSET	18
-#define MXC_CCM_COSR_SSI2_RX_SRC_SEL_MASK	(0x3 << 20)
-#define MXC_CCM_COSR_SSI2_RX_SRC_SEL_OFFSET	20
-#define MXC_CCM_COSR_SSI2_TX_SRC_SEL_MASK	(0x3 << 22)
-#define MXC_CCM_COSR_SSI2_TX_SRC_SEL_OFFSET	22
-#define MXC_CCM_COSR_ASRC_AUDIO_EN		(1 << 24)
-#define MXC_CCM_COSR_ASRC_AUDIO_PODF_MASK	(0x3F << 26)
-#define MXC_CCM_COSR_ASRC_AUDIO_PODF_OFFSET	26
-
-#endif
--- a/arch/arm/include/asm/arch-mx35/gpio.h
+++ b/arch/arm/include/asm/arch-mx35/gpio.h
@ -1,13 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2011
- * Stefano Babic, DENX Software Engineering, <sbabic@denx.de>
- */
-
-
-#ifndef __ASM_ARCH_MX35_GPIO_H
-#define __ASM_ARCH_MX35_GPIO_H
-
-#include <asm/mach-imx/gpio.h>
-
-#endif
--- a/arch/arm/include/asm/arch-mx35/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx35/imx-regs.h
@ -1,356 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
- *
- * (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
- */
-
-#ifndef __ASM_ARCH_MX35_H
-#define __ASM_ARCH_MX35_H
-
-#define ARCH_MXC
-
-/*
- * IRAM
- */
-#define IRAM_BASE_ADDR		0x10000000	/* internal ram */
-#define IRAM_SIZE		0x00020000	/* 128 KB */
-
-#define LOW_LEVEL_SRAM_STACK	0x1001E000
-
-/*
- * AIPS 1
- */
-#define AIPS1_BASE_ADDR         0x43F00000
-#define AIPS1_CTRL_BASE_ADDR    AIPS1_BASE_ADDR
-#define MAX_BASE_ADDR           0x43F04000
-#define EVTMON_BASE_ADDR        0x43F08000
-#define CLKCTL_BASE_ADDR        0x43F0C000
-#define I2C1_BASE_ADDR		0x43F80000
-#define I2C3_BASE_ADDR          0x43F84000
-#define ATA_BASE_ADDR           0x43F8C000
-#define UART1_BASE		0x43F90000
-#define UART2_BASE		0x43F94000
-#define I2C2_BASE_ADDR          0x43F98000
-#define CSPI1_BASE_ADDR         0x43FA4000
-#define IOMUXC_BASE_ADDR        0x43FAC000
-
-/*
- * SPBA
- */
-#define SPBA_BASE_ADDR          0x50000000
-#define UART3_BASE		0x5000C000
-#define CSPI2_BASE_ADDR         0x50010000
-#define ATA_DMA_BASE_ADDR       0x50020000
-#define FEC_BASE_ADDR           0x50038000
-#define SPBA_CTRL_BASE_ADDR     0x5003C000
-
-/*
- * AIPS 2
- */
-#define AIPS2_BASE_ADDR         0x53F00000
-#define AIPS2_CTRL_BASE_ADDR    AIPS2_BASE_ADDR
-#define CCM_BASE_ADDR           0x53F80000
-#define GPT1_BASE_ADDR          0x53F90000
-#define EPIT1_BASE_ADDR         0x53F94000
-#define EPIT2_BASE_ADDR         0x53F98000
-#define GPIO3_BASE_ADDR         0x53FA4000
-#define MMC_SDHC1_BASE_ADDR	0x53FB4000
-#define MMC_SDHC2_BASE_ADDR	0x53FB8000
-#define MMC_SDHC3_BASE_ADDR	0x53FBC000
-#define IPU_CTRL_BASE_ADDR	0x53FC0000
-#define GPIO1_BASE_ADDR		0x53FCC000
-#define GPIO2_BASE_ADDR		0x53FD0000
-#define SDMA_BASE_ADDR		0x53FD4000
-#define RTC_BASE_ADDR		0x53FD8000
-#define WDOG1_BASE_ADDR		0x53FDC000
-#define PWM_BASE_ADDR		0x53FE0000
-#define RTIC_BASE_ADDR		0x53FEC000
-#define IIM_BASE_ADDR		0x53FF0000
-#define IMX_USB_BASE		0x53FF4000
-#define IMX_USB_PORT_OFFSET	0x400
-
-#define IMX_CCM_BASE		CCM_BASE_ADDR
-
-/*
- * ROMPATCH and AVIC
- */
-#define ROMPATCH_BASE_ADDR	0x60000000
-#define AVIC_BASE_ADDR		0x68000000
-
-/*
- * NAND, SDRAM, WEIM, M3IF, EMI controllers
- */
-#define EXT_MEM_CTRL_BASE	0xB8000000
-#define ESDCTL_BASE_ADDR	0xB8001000
-#define WEIM_BASE_ADDR		0xB8002000
-#define WEIM_CTRL_CS0		WEIM_BASE_ADDR
-#define WEIM_CTRL_CS1		(WEIM_BASE_ADDR + 0x10)
-#define WEIM_CTRL_CS2		(WEIM_BASE_ADDR + 0x20)
-#define WEIM_CTRL_CS3		(WEIM_BASE_ADDR + 0x30)
-#define WEIM_CTRL_CS4		(WEIM_BASE_ADDR + 0x40)
-#define WEIM_CTRL_CS5		(WEIM_BASE_ADDR + 0x50)
-#define M3IF_BASE_ADDR		0xB8003000
-#define EMI_BASE_ADDR		0xB8004000
-
-#define NFC_BASE_ADDR		0xBB000000
-
-/*
- * Memory regions and CS
- */
-#define IPU_MEM_BASE_ADDR	0x70000000
-#define CSD0_BASE_ADDR		0x80000000
-#define CSD1_BASE_ADDR		0x90000000
-#define CS0_BASE_ADDR		0xA0000000
-#define CS1_BASE_ADDR		0xA8000000
-#define CS2_BASE_ADDR		0xB0000000
-#define CS3_BASE_ADDR		0xB2000000
-#define CS4_BASE_ADDR		0xB4000000
-#define CS5_BASE_ADDR		0xB6000000
-
-/*
- * IRQ Controller Register Definitions.
- */
-#define AVIC_NIMASK		0x04
-#define AVIC_INTTYPEH		0x18
-#define AVIC_INTTYPEL		0x1C
-
-/* L210 */
-#define L2CC_BASE_ADDR		0x30000000
-#define L2_CACHE_LINE_SIZE		32
-#define L2_CACHE_CTL_REG		0x100
-#define L2_CACHE_AUX_CTL_REG		0x104
-#define L2_CACHE_SYNC_REG		0x730
-#define L2_CACHE_INV_LINE_REG		0x770
-#define L2_CACHE_INV_WAY_REG		0x77C
-#define L2_CACHE_CLEAN_LINE_REG		0x7B0
-#define L2_CACHE_CLEAN_INV_LINE_REG	0x7F0
-#define L2_CACHE_DBG_CTL_REG		0xF40
-
-#define CLKMODE_AUTO		0
-#define CLKMODE_CONSUMER	1
-
-#define PLL_PD(x)		(((x) & 0xf) << 26)
-#define PLL_MFD(x)		(((x) & 0x3ff) << 16)
-#define PLL_MFI(x)		(((x) & 0xf) << 10)
-#define PLL_MFN(x)		(((x) & 0x3ff) << 0)
-
-#define _PLL_BRM(x)	((x) << 31)
-#define _PLL_PD(x)	(((x) - 1) << 26)
-#define _PLL_MFD(x)	(((x) - 1) << 16)
-#define _PLL_MFI(x)	((x) << 10)
-#define _PLL_MFN(x)	(x)
-#define _PLL_SETTING(brm, pd, mfd, mfi, mfn) \
-	(_PLL_BRM(brm) | _PLL_PD(pd) | _PLL_MFD(mfd) | _PLL_MFI(mfi) |\
-	 _PLL_MFN(mfn))
-
-#define CCM_MPLL_532_HZ	_PLL_SETTING(1, 1, 12, 11, 1)
-#define CCM_MPLL_399_HZ _PLL_SETTING(0, 1, 16, 8, 5)
-#define CCM_PPLL_300_HZ _PLL_SETTING(0, 1, 4, 6, 1)
-
-#define CSCR_U(x)	(WEIM_CTRL_CS#x + 0)
-#define CSCR_L(x)	(WEIM_CTRL_CS#x + 4)
-#define CSCR_A(x)	(WEIM_CTRL_CS#x + 8)
-
-#define IIM_SREV	0x24
-#define ROMPATCH_REV	0x40
-
-#define IPU_CONF	IPU_CTRL_BASE_ADDR
-
-#define IPU_CONF_PXL_ENDIAN	(1<<8)
-#define IPU_CONF_DU_EN		(1<<7)
-#define IPU_CONF_DI_EN		(1<<6)
-#define IPU_CONF_ADC_EN		(1<<5)
-#define IPU_CONF_SDC_EN		(1<<4)
-#define IPU_CONF_PF_EN		(1<<3)
-#define IPU_CONF_ROT_EN		(1<<2)
-#define IPU_CONF_IC_EN		(1<<1)
-#define IPU_CONF_CSI_EN		(1<<0)
-
-/*
- * CSPI register definitions
- */
-#define MXC_SPI_BASE_ADDRESSES \
-	0x43fa4000, \
-	0x50010000,
-
-#define GPIO_PORT_NUM		3
-#define GPIO_NUM_PIN		32
-
-#define CHIP_REV_1_0		0x10
-#define CHIP_REV_2_0		0x20
-
-#define BOARD_REV_1_0		0x0
-#define BOARD_REV_2_0		0x1
-
-#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
-#include <asm/types.h>
-
-/* Clock Control Module (CCM) registers */
-struct ccm_regs {
-	u32 ccmr;	/* Control */
-	u32 pdr0;	/* Post divider 0 */
-	u32 pdr1;	/* Post divider 1 */
-	u32 pdr2;	/* Post divider 2 */
-	u32 pdr3;	/* Post divider 3 */
-	u32 pdr4;	/* Post divider 4 */
-	u32 rcsr;	/* CCM Status */
-	u32 mpctl;	/* Core PLL Control */
-	u32 ppctl;	/* Peripheral PLL Control */
-	u32 acmr;	/* Audio clock mux */
-	u32 cosr;	/* Clock out source */
-	u32 cgr0;	/* Clock Gating Control 0 */
-	u32 cgr1;	/* Clock Gating Control 1 */
-	u32 cgr2;	/* Clock Gating Control 2 */
-	u32 cgr3;	/* Clock Gating Control 3 */
-	u32 reserved;
-	u32 dcvr0;	/* DPTC Comparator 0 */
-	u32 dcvr1;	/* DPTC Comparator 0 */
-	u32 dcvr2;	/* DPTC Comparator 0 */
-	u32 dcvr3;	/* DPTC Comparator 0 */
-	u32 ltr0;	/* Load Tracking 0 */
-	u32 ltr1;	/* Load Tracking 1 */
-	u32 ltr2;	/* Load Tracking 2 */
-	u32 ltr3;	/* Load Tracking 3 */
-	u32 ltbr0;	/* Load Tracking Buffer 0 */
-};
-
-/* IIM control registers */
-struct iim_regs {
-	u32 iim_stat;
-	u32 iim_statm;
-	u32 iim_err;
-	u32 iim_emask;
-	u32 iim_fctl;
-	u32 iim_ua;
-	u32 iim_la;
-	u32 iim_sdat;
-	u32 iim_prev;
-	u32 iim_srev;
-	u32 iim_prg_p;
-	u32 iim_scs0;
-	u32 iim_scs1;
-	u32 iim_scs2;
-	u32 iim_scs3;
-	u32 res1[0x1f1];
-	struct fuse_bank {
-		u32 fuse_regs[0x20];
-		u32 fuse_rsvd[0xe0];
-	} bank[3];
-};
-
-struct fuse_bank0_regs {
-	u32 fuse0_7[8];
-	u32 uid[8];
-	u32 fuse16_31[0x10];
-};
-
-struct fuse_bank1_regs {
-	u32 fuse0_21[0x16];
-	u32 usr;
-	u32 fuse23_31[9];
-};
-
-/* General Purpose Timer (GPT) registers */
-struct gpt_regs {
-	u32 ctrl;	/* control */
-	u32 pre;	/* prescaler */
-	u32 stat;	/* status */
-	u32 intr;	/* interrupt */
-	u32 cmp[3];	/* output compare 1-3 */
-	u32 capt[2];	/* input capture 1-2 */
-	u32 counter;	/* counter */
-};
-
-struct esdc_regs {
-	u32	esdctl0;
-	u32	esdcfg0;
-	u32	esdctl1;
-	u32	esdcfg1;
-	u32	esdmisc;
-	u32	reserved[4];
-	u32	esdcdly[5];
-	u32	esdcdlyl;
-};
-
-#define ESDC_MISC_RST		(1 << 1)
-#define ESDC_MISC_MDDR_EN	(1 << 2)
-#define ESDC_MISC_MDDR_DL_RST	(1 << 3)
-#define ESDC_MISC_DDR_EN	(1 << 8)
-#define ESDC_MISC_DDR2_EN	(1 << 9)
-
-/* Multi-Layer AHB Crossbar Switch (MAX) registers */
-struct max_regs {
-	u32 mpr0;
-	u32 pad00[3];
-	u32 sgpcr0;
-	u32 pad01[59];
-	u32 mpr1;
-	u32 pad02[3];
-	u32 sgpcr1;
-	u32 pad03[59];
-	u32 mpr2;
-	u32 pad04[3];
-	u32 sgpcr2;
-	u32 pad05[59];
-	u32 mpr3;
-	u32 pad06[3];
-	u32 sgpcr3;
-	u32 pad07[59];
-	u32 mpr4;
-	u32 pad08[3];
-	u32 sgpcr4;
-	u32 pad09[251];
-	u32 mgpcr0;
-	u32 pad10[63];
-	u32 mgpcr1;
-	u32 pad11[63];
-	u32 mgpcr2;
-	u32 pad12[63];
-	u32 mgpcr3;
-	u32 pad13[63];
-	u32 mgpcr4;
-	u32 pad14[63];
-	u32 mgpcr5;
-};
-
-/* AHB <-> IP-Bus Interface (AIPS) */
-struct aips_regs {
-	u32 mpr_0_7;
-	u32 mpr_8_15;
-	u32 pad0[6];
-	u32 pacr_0_7;
-	u32 pacr_8_15;
-	u32 pacr_16_23;
-	u32 pacr_24_31;
-	u32 pad1[4];
-	u32 opacr_0_7;
-	u32 opacr_8_15;
-	u32 opacr_16_23;
-	u32 opacr_24_31;
-	u32 opacr_32_39;
-};
-
-/*
- * NFMS bit in RCSR register for pagesize of nandflash
- */
-#define NFMS_BIT		8
-#define NFMS_NF_DWIDTH		14
-#define NFMS_NF_PG_SZ		8
-
-#define CCM_RCSR_NF_16BIT_SEL	(1 << 14)
-
-#endif
-
-/*
- * Generic timer support
- */
-#ifdef CONFIG_MX35_CLK32
-#define	CONFIG_SYS_TIMER_RATE	CONFIG_MX35_CLK32
-#else
-#define	CONFIG_SYS_TIMER_RATE	32768
-#endif
-
-#define CONFIG_SYS_TIMER_COUNTER	(GPT1_BASE_ADDR+36)
-
-#endif /* __ASM_ARCH_MX35_H */
--- a/arch/arm/include/asm/arch-mx35/iomux-mx35.h
+++ b/arch/arm/include/asm/arch-mx35/iomux-mx35.h
--- a/arch/arm/include/asm/arch-mx35/lowlevel_macro.S
+++ b/arch/arm/include/asm/arch-mx35/lowlevel_macro.S
@ -1,125 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
- *
- * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
- */
-
-#include <asm/arch/imx-regs.h>
-#include <generated/asm-offsets.h>
-#include <asm/macro.h>
-
-/*
- * AIPS setup - Only setup MPROTx registers.
- * The PACR default values are good.
- *
- * Default argument values:
- *  - MPR: Set all MPROTx to be non-bufferable, trusted for R/W, not forced to
- *    user-mode.
- *  - OPACR: Clear the on and off peripheral modules Supervisor Protect bit for
- *    SDMA to access them.
- */
-.macro init_aips mpr=0x77777777, opacr=0x00000000
-	ldr	r0, =AIPS1_BASE_ADDR
-	ldr	r1, =\mpr
-	str	r1, [r0, #AIPS_MPR_0_7]
-	str	r1, [r0, #AIPS_MPR_8_15]
-	ldr	r2, =AIPS2_BASE_ADDR
-	str	r1, [r2, #AIPS_MPR_0_7]
-	str	r1, [r2, #AIPS_MPR_8_15]
-
-	/* Did not change the AIPS control registers access type. */
-	ldr	r1, =\opacr
-	str	r1, [r0, #AIPS_OPACR_0_7]
-	str	r1, [r0, #AIPS_OPACR_8_15]
-	str	r1, [r0, #AIPS_OPACR_16_23]
-	str	r1, [r0, #AIPS_OPACR_24_31]
-	str	r1, [r0, #AIPS_OPACR_32_39]
-	str	r1, [r2, #AIPS_OPACR_0_7]
-	str	r1, [r2, #AIPS_OPACR_8_15]
-	str	r1, [r2, #AIPS_OPACR_16_23]
-	str	r1, [r2, #AIPS_OPACR_24_31]
-	str	r1, [r2, #AIPS_OPACR_32_39]
-.endm
-
-/*
- * MAX (Multi-Layer AHB Crossbar Switch) setup
- *
- * Default argument values:
- *  - MPR: priority is M4 > M2 > M3 > M5 > M0 > M1
- *  - SGPCR: always park on last master
- *  - MGPCR: restore default values
- */
-.macro init_max mpr=0x00302154, sgpcr=0x00000010, mgpcr=0x00000000
-	ldr	r0, =MAX_BASE_ADDR
-	ldr	r1, =\mpr
-	str	r1, [r0, #MAX_MPR0]	/* for S0 */
-	str	r1, [r0, #MAX_MPR1]	/* for S1 */
-	str	r1, [r0, #MAX_MPR2]	/* for S2 */
-	str	r1, [r0, #MAX_MPR3]	/* for S3 */
-	str	r1, [r0, #MAX_MPR4]	/* for S4 */
-	ldr	r1, =\sgpcr
-	str	r1, [r0, #MAX_SGPCR0]	/* for S0 */
-	str	r1, [r0, #MAX_SGPCR1]	/* for S1 */
-	str	r1, [r0, #MAX_SGPCR2]	/* for S2 */
-	str	r1, [r0, #MAX_SGPCR3]	/* for S3 */
-	str	r1, [r0, #MAX_SGPCR4]	/* for S4 */
-	ldr	r1, =\mgpcr
-	str	r1, [r0, #MAX_MGPCR0]	/* for M0 */
-	str	r1, [r0, #MAX_MGPCR1]	/* for M1 */
-	str	r1, [r0, #MAX_MGPCR2]	/* for M2 */
-	str	r1, [r0, #MAX_MGPCR3]	/* for M3 */
-	str	r1, [r0, #MAX_MGPCR4]	/* for M4 */
-	str	r1, [r0, #MAX_MGPCR5]	/* for M5 */
-.endm
-
-/*
- * M3IF setup
- *
- * Default argument values:
- *  - CTL:
- * MRRP[0] = L2CC0 not on priority list (0 << 0)	= 0x00000000
- * MRRP[1] = L2CC1 not on priority list (0 << 1)	= 0x00000000
- * MRRP[2] = MBX not on priority list (0 << 2)		= 0x00000000
- * MRRP[3] = MAX1 not on priority list (0 << 3)		= 0x00000000
- * MRRP[4] = SDMA not on priority list (0 << 4)		= 0x00000000
- * MRRP[5] = MPEG4 not on priority list (0 << 5)	= 0x00000000
- * MRRP[6] = IPU1 on priority list (1 << 6)		= 0x00000040
- * MRRP[7] = IPU2 not on priority list (0 << 7)		= 0x00000000
- *							------------
- *							  0x00000040
- */
-.macro init_m3if ctl=0x00000040
-	/* M3IF Control Register (M3IFCTL) */
-	write32	M3IF_BASE_ADDR, \ctl
-.endm
-
-.macro core_init
-	mrc	p15, 0, r1, c1, c0, 0
-
-	/* Set branch prediction enable */
-	mrc	p15, 0, r0, c1, c0, 1
-	orr	r0, r0, #7
-	mcr	p15, 0, r0, c1, c0, 1
-	orr	r1, r1, #1 << 11
-
-	/* Set unaligned access enable */
-	orr	r1, r1, #1 << 22
-
-	/* Set low int latency enable */
-	orr	r1, r1, #1 << 21
-
-	mcr	p15, 0, r1, c1, c0, 0
-
-	mov	r0, #0
-
-	mcr	p15, 0, r0, c15, c2, 4
-
-	mcr	p15, 0, r0, c7, c7, 0	/* Invalidate I cache and D cache */
-	mcr	p15, 0, r0, c8, c7, 0	/* Invalidate TLBs */
-	mcr	p15, 0, r0, c7, c10, 4	/* Drain the write buffer */
-
-	/* Setup the Peripheral Port Memory Remap Register */
-	ldr	r0, =0x40000015		/* Start from AIPS 2-GB region */
-	mcr	p15, 0, r0, c15, c2, 4
-.endm
--- a/arch/arm/include/asm/arch-mx35/mmc_host_def.h
+++ b/arch/arm/include/asm/arch-mx35/mmc_host_def.h
@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * (C) Copyright 2008
- * Texas Instruments, <www.ti.com>
- * Syed Mohammed Khasim <khasim@ti.com>
- */
-
-#ifndef MMC_HOST_DEF_H
-#define MMC_HOST_DEF_H
-
-/* Driver definitions */
-#define MMCSD_SECTOR_SIZE		512
-
-#endif /* MMC_HOST_DEF_H */
--- a/arch/arm/include/asm/arch-mx35/sys_proto.h
+++ b/arch/arm/include/asm/arch-mx35/sys_proto.h
@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2011
- * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
- */
-
-#ifndef _MX35_SYS_PROTO_H_
-#define _MX35_SYS_PROTO_H_
-
-#include <asm/mach-imx/sys_proto.h>
-
-void mx3_setup_sdram_bank(u32 start_address, u32 ddr2_config, u32 row,
-			  u32 col, u32 dsize, u32 refresh);
-
-#endif
--- a/arch/arm/lib/asm-offsets.c
+++ b/arch/arm/lib/asm-offsets.c
@ -15,7 +15,7 @@
 #include <linux/kbuild.h>
 #include <linux/arm-smccc.h>

-#if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX35) \
+#if defined(CONFIG_MX27) \
 	|| defined(CONFIG_MX51) || defined(CONFIG_MX53)
 #include <asm/arch/imx-regs.h>
 #endif
@ -35,42 +35,6 @@ int main(void)
 	 * code. Is it better to define the macros directly in headers?
 	 */

-#if defined(CONFIG_MX25)
-	/* Clock Control Module */
-	DEFINE(CCM_CCTL, offsetof(struct ccm_regs, cctl));
-	DEFINE(CCM_CGCR0, offsetof(struct ccm_regs, cgr0));
-	DEFINE(CCM_CGCR1, offsetof(struct ccm_regs, cgr1));
-	DEFINE(CCM_CGCR2, offsetof(struct ccm_regs, cgr2));
-	DEFINE(CCM_PCDR2, offsetof(struct ccm_regs, pcdr[2]));
-	DEFINE(CCM_MCR, offsetof(struct ccm_regs, mcr));
-
-	/* Enhanced SDRAM Controller */
-	DEFINE(ESDRAMC_ESDCTL0, offsetof(struct esdramc_regs, ctl0));
-	DEFINE(ESDRAMC_ESDCFG0, offsetof(struct esdramc_regs, cfg0));
-	DEFINE(ESDRAMC_ESDMISC, offsetof(struct esdramc_regs, misc));
-
-	/* Multi-Layer AHB Crossbar Switch */
-	DEFINE(MAX_MPR0, offsetof(struct max_regs, mpr0));
-	DEFINE(MAX_SGPCR0, offsetof(struct max_regs, sgpcr0));
-	DEFINE(MAX_MPR1, offsetof(struct max_regs, mpr1));
-	DEFINE(MAX_SGPCR1, offsetof(struct max_regs, sgpcr1));
-	DEFINE(MAX_MPR2, offsetof(struct max_regs, mpr2));
-	DEFINE(MAX_SGPCR2, offsetof(struct max_regs, sgpcr2));
-	DEFINE(MAX_MPR3, offsetof(struct max_regs, mpr3));
-	DEFINE(MAX_SGPCR3, offsetof(struct max_regs, sgpcr3));
-	DEFINE(MAX_MPR4, offsetof(struct max_regs, mpr4));
-	DEFINE(MAX_SGPCR4, offsetof(struct max_regs, sgpcr4));
-	DEFINE(MAX_MGPCR0, offsetof(struct max_regs, mgpcr0));
-	DEFINE(MAX_MGPCR1, offsetof(struct max_regs, mgpcr1));
-	DEFINE(MAX_MGPCR2, offsetof(struct max_regs, mgpcr2));
-	DEFINE(MAX_MGPCR3, offsetof(struct max_regs, mgpcr3));
-	DEFINE(MAX_MGPCR4, offsetof(struct max_regs, mgpcr4));
-
-	/* AHB <-> IP-Bus Interface */
-	DEFINE(AIPS_MPR_0_7, offsetof(struct aips_regs, mpr_0_7));
-	DEFINE(AIPS_MPR_8_15, offsetof(struct aips_regs, mpr_8_15));
-#endif
-
 #if defined(CONFIG_MX27)
 	DEFINE(AIPI1_PSR0, IMX_AIPI1_BASE + offsetof(struct aipi_regs, psr0));
 	DEFINE(AIPI1_PSR1, IMX_AIPI1_BASE + offsetof(struct aipi_regs, psr1));
@ -97,56 +61,6 @@ int main(void)
 		offsetof(struct system_control_regs, fmcr));
 #endif

-#if defined(CONFIG_MX35)
-	/* Round up to make sure size gives nice stack alignment */
-	DEFINE(CLKCTL_CCMR, offsetof(struct ccm_regs, ccmr));
-	DEFINE(CLKCTL_PDR0, offsetof(struct ccm_regs, pdr0));
-	DEFINE(CLKCTL_PDR1, offsetof(struct ccm_regs, pdr1));
-	DEFINE(CLKCTL_PDR2, offsetof(struct ccm_regs, pdr2));
-	DEFINE(CLKCTL_PDR3, offsetof(struct ccm_regs, pdr3));
-	DEFINE(CLKCTL_PDR4, offsetof(struct ccm_regs, pdr4));
-	DEFINE(CLKCTL_RCSR, offsetof(struct ccm_regs, rcsr));
-	DEFINE(CLKCTL_MPCTL, offsetof(struct ccm_regs, mpctl));
-	DEFINE(CLKCTL_PPCTL, offsetof(struct ccm_regs, ppctl));
-	DEFINE(CLKCTL_ACMR, offsetof(struct ccm_regs, acmr));
-	DEFINE(CLKCTL_COSR, offsetof(struct ccm_regs, cosr));
-	DEFINE(CLKCTL_CGR0, offsetof(struct ccm_regs, cgr0));
-	DEFINE(CLKCTL_CGR1, offsetof(struct ccm_regs, cgr1));
-	DEFINE(CLKCTL_CGR2, offsetof(struct ccm_regs, cgr2));
-	DEFINE(CLKCTL_CGR3, offsetof(struct ccm_regs, cgr3));
-
-	/* Multi-Layer AHB Crossbar Switch */
-	DEFINE(MAX_MPR0, offsetof(struct max_regs, mpr0));
-	DEFINE(MAX_SGPCR0, offsetof(struct max_regs, sgpcr0));
-	DEFINE(MAX_MPR1, offsetof(struct max_regs, mpr1));
-	DEFINE(MAX_SGPCR1, offsetof(struct max_regs, sgpcr1));
-	DEFINE(MAX_MPR2, offsetof(struct max_regs, mpr2));
-	DEFINE(MAX_SGPCR2, offsetof(struct max_regs, sgpcr2));
-	DEFINE(MAX_MPR3, offsetof(struct max_regs, mpr3));
-	DEFINE(MAX_SGPCR3, offsetof(struct max_regs, sgpcr3));
-	DEFINE(MAX_MPR4, offsetof(struct max_regs, mpr4));
-	DEFINE(MAX_SGPCR4, offsetof(struct max_regs, sgpcr4));
-	DEFINE(MAX_MGPCR0, offsetof(struct max_regs, mgpcr0));
-	DEFINE(MAX_MGPCR1, offsetof(struct max_regs, mgpcr1));
-	DEFINE(MAX_MGPCR2, offsetof(struct max_regs, mgpcr2));
-	DEFINE(MAX_MGPCR3, offsetof(struct max_regs, mgpcr3));
-	DEFINE(MAX_MGPCR4, offsetof(struct max_regs, mgpcr4));
-	DEFINE(MAX_MGPCR5, offsetof(struct max_regs, mgpcr5));
-
-	/* AHB <-> IP-Bus Interface */
-	DEFINE(AIPS_MPR_0_7, offsetof(struct aips_regs, mpr_0_7));
-	DEFINE(AIPS_MPR_8_15, offsetof(struct aips_regs, mpr_8_15));
-	DEFINE(AIPS_PACR_0_7, offsetof(struct aips_regs, pacr_0_7));
-	DEFINE(AIPS_PACR_8_15, offsetof(struct aips_regs, pacr_8_15));
-	DEFINE(AIPS_PACR_16_23, offsetof(struct aips_regs, pacr_16_23));
-	DEFINE(AIPS_PACR_24_31, offsetof(struct aips_regs, pacr_24_31));
-	DEFINE(AIPS_OPACR_0_7, offsetof(struct aips_regs, opacr_0_7));
-	DEFINE(AIPS_OPACR_8_15, offsetof(struct aips_regs, opacr_8_15));
-	DEFINE(AIPS_OPACR_16_23, offsetof(struct aips_regs, opacr_16_23));
-	DEFINE(AIPS_OPACR_24_31, offsetof(struct aips_regs, opacr_24_31));
-	DEFINE(AIPS_OPACR_32_39, offsetof(struct aips_regs, opacr_32_39));
-#endif
-
 #if defined(CONFIG_MX51) || defined(CONFIG_MX53)
 	/* Round up to make sure size gives nice stack alignment */
 	DEFINE(CLKCTL_CCMR, offsetof(struct clkctl, ccr));
--- a/arch/arm/mach-imx/mx2/Kconfig
+++ b/arch/arm/mach-imx/mx2/Kconfig
@ -1,23 +0,0 @@
-if ARCH_MX25
-
-config MX25
-	bool
-	default y
-	select SYS_FSL_ERRATUM_ESDHC_A001
-choice
-	prompt "MX25 board select"
-	optional
-
-config TARGET_ZMX25
-	bool "Support zmx25"
-	select BOARD_LATE_INIT
-	select CPU_ARM926EJS
-
-endchoice
-
-config SYS_SOC
-	default "mx25"
-
-source "board/syteco/zmx25/Kconfig"
-
-endif
--- a/arch/arm/mach-imx/mxs/Kconfig
+++ b/arch/arm/mach-imx/mxs/Kconfig
@ -39,9 +39,6 @@ choice
 	prompt "MX28 board select"
 	optional

-config TARGET_BG0900
-	bool "Support bg0900"
-
 config TARGET_MX28EVK
 	bool "Support mx28evk"
 	select BOARD_EARLY_INIT_F
@ -56,6 +53,5 @@ config SYS_SOC

 source "board/freescale/mx28evk/Kconfig"
 source "board/liebherr/xea/Kconfig"
-source "board/ppcag/bg0900/Kconfig"

 endif
--- a/arch/powerpc/cpu/mpc83xx/Kconfig
+++ b/arch/powerpc/cpu/mpc83xx/Kconfig
@ -8,22 +8,6 @@ choice
 	prompt "Target select"
 	optional

-config TARGET_MPC8349EMDS
-	bool "Support MPC8349EMDS"
-	select ARCH_MPC8349
-	select BOARD_EARLY_INIT_F
-	select SYS_FSL_DDR
-	select SYS_FSL_DDR_BE
-	select SYS_FSL_HAS_DDR2
-
-config TARGET_MPC8349EMDS_SDRAM
-	bool "Support MPC8349EMDS_SDRAM"
-	select ARCH_MPC8349
-	select BOARD_EARLY_INIT_F
-	select SYS_FSL_DDR
-	select SYS_FSL_DDR_BE
-	select SYS_FSL_HAS_DDR2
-
 config TARGET_MPC837XERDB
 	bool "Support MPC837XERDB"
 	select ARCH_MPC837X
@ -173,15 +157,6 @@ config ARCH_MPC834X
 	bool
 	select SYS_CACHE_SHIFT_5

-config ARCH_MPC8349
-	bool
-	select ARCH_MPC834X
-	select MPC83XX_PCI_SUPPORT
-	select MPC83XX_TSEC1_SUPPORT
-	select MPC83XX_TSEC2_SUPPORT
-	select MPC83XX_LDP_PIN
-	select MPC83XX_SECOND_I2C
-
 config ARCH_MPC8360
 	bool
 	select MPC83XX_QUICC_ENGINE
@ -220,36 +195,9 @@ source "arch/powerpc/cpu/mpc83xx/sysio/Kconfig"
 source "arch/powerpc/cpu/mpc83xx/arbiter/Kconfig"
 source "arch/powerpc/cpu/mpc83xx/initreg/Kconfig"

-menu "Legacy options"
-
-if ARCH_MPC8349
-
-#TODO(mario.six@gdsys.cc): Remove when mpc83xx PCI has been converted to DM/DT
-choice
-	prompt "PMC slot configuration"
-
-config PCI_ALL_PCI1
-	bool "All PMC slots on PCI1"
-
-config PCI_ONE_PCI1
-	bool "First PMC1 on PCI1"
-
-config PCI_TWO_PCI1
-	bool "First two PMC1 on PCI1"
-
-endchoice
-
-config PCI_64BIT
-	bool "PMC2 is 64bit"
-
-endif
-
-endmenu
-
 config FSL_ELBC
 	bool

-source "board/freescale/mpc8349emds/Kconfig"
 source "board/freescale/mpc837xerdb/Kconfig"
 source "board/ids/ids8313/Kconfig"
 source "board/keymile/Kconfig"
--- a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc0
+++ b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc0
@ -22,7 +22,7 @@ config BR0_PORTSIZE_16BIT

 config BR0_PORTSIZE_32BIT
 	depends on !BR0_MACHINE_FCM
-	depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379
+	depends on ARCH_MPC8360 || ARCH_MPC8379
 	bool "32-bit"

 endchoice
@ -58,11 +58,11 @@ config BR0_MACHINE_GPCM
 	bool "GPCM"

 config BR0_MACHINE_FCM
-	depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360
+	depends on !ARCH_MPC832X && !ARCH_MPC8360
 	bool "FCM"

 config BR0_MACHINE_SDRAM
-	depends on ARCH_MPC8349 || ARCH_MPC8360
+	depends on ARCH_MPC8360
 	bool "SDRAM"

 config BR0_MACHINE_UPMA
--- a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc1
+++ b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc1
@ -22,7 +22,7 @@ config BR1_PORTSIZE_16BIT

 config BR1_PORTSIZE_32BIT
 	depends on !BR1_MACHINE_FCM
-	depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379
+	depends on ARCH_MPC8360 || ARCH_MPC8379
 	bool "32-bit"

 endchoice
@ -58,11 +58,11 @@ config BR1_MACHINE_GPCM
 	bool "GPCM"

 config BR1_MACHINE_FCM
-	depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360
+	depends on !ARCH_MPC832X && !ARCH_MPC8360
 	bool "FCM"

 config BR1_MACHINE_SDRAM
-	depends on ARCH_MPC8349 || ARCH_MPC8360
+	depends on ARCH_MPC8360
 	bool "SDRAM"

 config BR1_MACHINE_UPMA
--- a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc2
+++ b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc2
@ -22,7 +22,7 @@ config BR2_PORTSIZE_16BIT

 config BR2_PORTSIZE_32BIT
 	depends on !BR2_MACHINE_FCM
-	depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379
+	depends on ARCH_MPC8360 || ARCH_MPC8379
 	bool "32-bit"

 endchoice
@ -58,11 +58,11 @@ config BR2_MACHINE_GPCM
 	bool "GPCM"

 config BR2_MACHINE_FCM
-	depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360
+	depends on !ARCH_MPC832X && !ARCH_MPC8360
 	bool "FCM"

 config BR2_MACHINE_SDRAM
-	depends on ARCH_MPC8349 || ARCH_MPC8360
+	depends on ARCH_MPC8360
 	bool "SDRAM"

 config BR2_MACHINE_UPMA
--- a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc3
+++ b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc3
@ -22,7 +22,7 @@ config BR3_PORTSIZE_16BIT

 config BR3_PORTSIZE_32BIT
 	depends on !BR3_MACHINE_FCM
-	depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379
+	depends on ARCH_MPC8360 || ARCH_MPC8379
 	bool "32-bit"

 endchoice
@ -58,11 +58,11 @@ config BR3_MACHINE_GPCM
 	bool "GPCM"

 config BR3_MACHINE_FCM
-	depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360
+	depends on !ARCH_MPC832X && !ARCH_MPC8360
 	bool "FCM"

 config BR3_MACHINE_SDRAM
-	depends on ARCH_MPC8349 || ARCH_MPC8360
+	depends on ARCH_MPC8360
 	bool "SDRAM"

 config BR3_MACHINE_UPMA
--- a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc4
+++ b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc4
@ -22,7 +22,7 @@ config BR4_PORTSIZE_16BIT

 config BR4_PORTSIZE_32BIT
 	depends on !BR4_MACHINE_FCM
-	depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379
+	depends on ARCH_MPC8360 || ARCH_MPC8379
 	bool "32-bit"

 endchoice
@ -58,11 +58,11 @@ config BR4_MACHINE_GPCM
 	bool "GPCM"

 config BR4_MACHINE_FCM
-	depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360
+	depends on !ARCH_MPC832X && !ARCH_MPC8360
 	bool "FCM"

 config BR4_MACHINE_SDRAM
-	depends on ARCH_MPC8349 || ARCH_MPC8360
+	depends on ARCH_MPC8360
 	bool "SDRAM"

 config BR4_MACHINE_UPMA
--- a/arch/powerpc/cpu/mpc83xx/hid/Kconfig
+++ b/arch/powerpc/cpu/mpc83xx/hid/Kconfig
@ -434,7 +434,7 @@ config HID2_IWLCK_1
 config HID2_IWLCK_2
 	bool "Way 0 through 2 locked"

-if ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379
+if ARCH_MPC8360 || ARCH_MPC8379

 config HID2_IWLCK_3
 	bool "Way 0 through 3 locked"
@ -470,7 +470,7 @@ config HID2_DWLCK_1
 config HID2_DWLCK_2
 	bool "Way 0 through 2 locked"

-if ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379
+if ARCH_MPC8360 || ARCH_MPC8379

 config HID2_DWLCK_3
 	bool "Way 0 through 3 locked"
--- a/arch/powerpc/cpu/mpc83xx/hrcw/Kconfig
+++ b/arch/powerpc/cpu/mpc83xx/hrcw/Kconfig
@ -7,7 +7,7 @@ config LBMC_CLOCK_MODE_1_1
 	bool "1 : 1"

 config LBMC_CLOCK_MODE_1_2
-	depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC837X
+	depends on ARCH_MPC8360 || ARCH_MPC837X
 	bool "1 : 2"

 endchoice
@ -19,12 +19,12 @@ config DDR_MC_CLOCK_MODE_1_2
 	bool "1 : 2"

 config DDR_MC_CLOCK_MODE_1_1
-	depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC837X
+	depends on ARCH_MPC8360 || ARCH_MPC837X
 	bool "1 : 1"

 endchoice

-if !ARCH_MPC8313 && !ARCH_MPC832X && !ARCH_MPC8349
+if !ARCH_MPC8313 && !ARCH_MPC832X

 choice
 	prompt "System PLL VCO division"
@ -67,43 +67,43 @@ config SYSTEM_PLL_FACTOR_6_1
 	bool "6 : 1"

 config SYSTEM_PLL_FACTOR_7_1
-	depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
+	depends on ARCH_MPV8360 || ARCH_MPC837X
 	bool "7 : 1"

 config SYSTEM_PLL_FACTOR_8_1
-	depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
+	depends on ARCH_MPV8360 || ARCH_MPC837X
 	bool "8 : 1"

 config SYSTEM_PLL_FACTOR_9_1
-	depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
+	depends on ARCH_MPV8360 || ARCH_MPC837X
 	bool "9 : 1"

 config SYSTEM_PLL_FACTOR_10_1
-	depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
+	depends on ARCH_MPV8360 || ARCH_MPC837X
 	bool "10 : 1"

 config SYSTEM_PLL_FACTOR_11_1
-	depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
+	depends on ARCH_MPV8360 || ARCH_MPC837X
 	bool "11 : 1"

 config SYSTEM_PLL_FACTOR_12_1
-	depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
+	depends on ARCH_MPV8360 || ARCH_MPC837X
 	bool "12 : 1"

 config SYSTEM_PLL_FACTOR_13_1
-	depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
+	depends on ARCH_MPV8360 || ARCH_MPC837X
 	bool "13 : 1"

 config SYSTEM_PLL_FACTOR_14_1
-	depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
+	depends on ARCH_MPV8360 || ARCH_MPC837X
 	bool "14 : 1"

 config SYSTEM_PLL_FACTOR_15_1
-	depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
+	depends on ARCH_MPV8360 || ARCH_MPC837X
 	bool "15 : 1"

 config SYSTEM_PLL_FACTOR_16_1
-	depends on ARCH_MPC8349 || ARCH_MPV8360
+	depends on ARCH_MPV8360
 	bool "16 : 1"

 endchoice
@ -310,21 +310,6 @@ config PCI_HOST_MODE_ENABLE

 endchoice

-if ARCH_MPC8349
-
-choice
-	prompt "PCI 64-bit mode"
-
-config PCI_64BIT_MODE_DISABLE
-	bool "Disabled"
-
-config PCI_64BIT_MODE_ENABLE
-	bool "Enabled"
-
-endchoice
-
-endif
-
 choice
 	prompt "PCI internal arbiter 1 mode"

@ -336,21 +321,6 @@ config PCI_INT_ARBITER1_ENABLE

 endchoice

-if ARCH_MPC8349
-
-choice
-	prompt "PCI internal arbiter 2 mode"
-
-config PCI_INT_ARBITER2_DISABLE
-	bool "Disabled"
-
-config PCI_INT_ARBITER2_ENABLE
-	bool "Enabled"
-
-endchoice
-
-endif
-
 if ARCH_MPC8360

 choice
@ -425,10 +395,6 @@ config BOOT_ROM_INTERFACE_PCI1
 	depends on MPC83XX_PCI_SUPPORT
 	bool "PCI1"

-config BOOT_ROM_INTERFACE_PCI2
-	depends on MPC83XX_PCI_SUPPORT && ARCH_MPC8349
-	bool "PCI2"
-
 config BOOT_ROM_INTERFACE_ON_CHIP_BOOT_ROM
 	depends on ARCH_MPC837X
 	bool "PCI2"
@ -448,15 +414,15 @@ config BOOT_ROM_INTERFACE_GPCM_16BIT
 	bool "Local bus GPCM - 16-bit ROM"

 config BOOT_ROM_INTERFACE_GPCM_32BIT
-	depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC837X
+	depends on ARCH_MPC8360 || ARCH_MPC837X
 	bool "Local bus GPCM - 32-bit ROM"

 config BOOT_ROM_INTERFACE_NAND_FLASH_8BIT_SMALL
-	depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360
+	depends on !ARCH_MPC832X && !ARCH_MPC8360
 	bool "Local bus NAND Flash- 8-bit small page ROM"

 config BOOT_ROM_INTERFACE_NAND_FLASH_8BIT_LARGE
-	depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360
+	depends on !ARCH_MPC832X && !ARCH_MPC8360
 	bool "Local bus NAND Flash- 8-bit large page ROM"

 endchoice
@ -467,11 +433,10 @@ choice
 	prompt "TSEC1 mode"

 config TSEC1_MODE_MII
-	depends on !ARCH_MPC8349
 	bool "MII"

 config TSEC1_MODE_RMII
-	depends on ARCH_MPC831X && !ARCH_MPC8349
+	depends on ARCH_MPC831X
 	bool "RMII"

 config TSEC1_MODE_RGMII
@ -481,14 +446,6 @@ config TSEC1_MODE_RTBI
 	depends on ARCH_MPC831X || ARCH_MPC837X
 	bool "RTBI"

-config TSEC1_MODE_GMII
-	depends on ARCH_MPC8349
-	bool "GMII"
-
-config TSEC1_MODE_TBI
-	depends on ARCH_MPC8349
-	bool "TBI"
-
 config TSEC1_MODE_SGMII
 	depends on ARCH_MPC831X || ARCH_MPC837X
 	bool "SGMII"
@ -503,11 +460,10 @@ choice
 	prompt "TSEC2 mode"

 config TSEC2_MODE_MII
-	depends on !ARCH_MPC8349
 	bool "MII"

 config TSEC2_MODE_RMII
-	depends on ARCH_MPC831X && !ARCH_MPC8349
+	depends on ARCH_MPC831X
 	bool "RMII"

 config TSEC2_MODE_RGMII
@ -517,14 +473,6 @@ config TSEC2_MODE_RTBI
 	depends on ARCH_MPC831X || ARCH_MPC837X
 	bool "RTBI"

-config TSEC2_MODE_GMII
-	depends on ARCH_MPC8349
-	bool "GMII"
-
-config TSEC2_MODE_TBI
-	depends on ARCH_MPC8349
-	bool "TBI"
-
 config TSEC2_MODE_SGMII
 	depends on ARCH_MPC831X || ARCH_MPC837X
 	bool "SGMII"
@ -559,7 +507,7 @@ endchoice

 endif

-if ARCH_MPC831X || ARCH_MPC832X || ARCH_MPC8349 || ARCH_MPC8360
+if ARCH_MPC831X || ARCH_MPC832X || ARCH_MPC8360

 choice
 	prompt "LALE timing"
@ -603,7 +551,7 @@ config DDR_MC_CLOCK_MODE

 config SYSTEM_PLL_VCO_DIV
 	int
-	default 0 if ARCH_MPC8349 || ARCH_MPC832X
+	default 0 if ARCH_MPC832X
 	default 2 if ARCH_MPC8313
 	default 0 if SYSTEM_PLL_VCO_DIV_2 && !ARCH_MPC8360 && !ARCH_MPC837X
 	default 1 if SYSTEM_PLL_VCO_DIV_4 && !ARCH_MPC8360 && !ARCH_MPC837X
@ -675,7 +623,6 @@ config BOOT_ROM_INTERFACE
 	hex
 	default 0x0 if BOOT_ROM_INTERFACE_DDR_SDRAM
 	default 0x4 if BOOT_ROM_INTERFACE_PCI1
-	default 0x8 if BOOT_ROM_INTERFACE_PCI2
 	default 0x8 if BOOT_ROM_INTERFACE_ESDHC
 	default 0xc if BOOT_ROM_INTERFACE_SPI
 	default 0xc if BOOT_ROM_INTERFACE_ON_CHIP_BOOT_ROM
@ -690,26 +637,18 @@ config TSEC1_MODE
 	default 0x0 if !MPC83XX_TSEC1_SUPPORT
 	default 0x0 if TSEC1_MODE_MII
 	default 0x1 if TSEC1_MODE_RMII
-	default 0x3 if TSEC1_MODE_RGMII && !ARCH_MPC8349
-	default 0x5 if TSEC1_MODE_RTBI && !ARCH_MPC8349
+	default 0x3 if TSEC1_MODE_RGMII
+	default 0x5 if TSEC1_MODE_RTBI
 	default 0x6 if TSEC1_MODE_SGMII
-	default 0x0 if TSEC1_MODE_RGMII && ARCH_MPC8349
-	default 0x1 if TSEC1_MODE_RTBI && ARCH_MPC8349
-	default 0x2 if TSEC1_MODE_GMII
-	default 0x3 if TSEC1_MODE_TBI

 config TSEC2_MODE
 	hex
 	default 0x0 if !MPC83XX_TSEC2_SUPPORT
 	default 0x0 if TSEC2_MODE_MII
 	default 0x1 if TSEC2_MODE_RMII
-	default 0x3 if TSEC2_MODE_RGMII && !ARCH_MPC8349
-	default 0x5 if TSEC2_MODE_RTBI && !ARCH_MPC8349
+	default 0x3 if TSEC2_MODE_RGMII
+	default 0x5 if TSEC2_MODE_RTBI
 	default 0x6 if TSEC2_MODE_SGMII
-	default 0x0 if TSEC2_MODE_RGMII && ARCH_MPC8349
-	default 0x1 if TSEC2_MODE_RTBI && ARCH_MPC8349
-	default 0x2 if TSEC2_MODE_GMII
-	default 0x3 if TSEC2_MODE_TBI

 config SECONDARY_DDR_IO
 	int
@ -792,9 +731,7 @@ config PCI_HOST_MODE

 config PCI_64BIT_MODE
 	int
-	default 0 if !ARCH_MPC8349
-	default 0 if PCI_64BIT_MODE_DISABLE
-	default 1 if PCI_64BIT_MODE_ENABLE
+	default 0

 config PCI_INT_ARBITER1
 	int
@ -804,9 +741,7 @@ config PCI_INT_ARBITER1

 config PCI_INT_ARBITER2
 	int
-	default 0 if !ARCH_MPC8349
-	default 0 if PCI_INT_ARBITER2_DISABLE
-	default 1 if PCI_INT_ARBITER2_ENABLE
+	default 0

 config PCI_CLOCK_OUTPUT_DRIVE
 	int
--- a/arch/powerpc/cpu/mpc83xx/hrcw/hrcw.h
+++ b/arch/powerpc/cpu/mpc83xx/hrcw/hrcw.h
@ -1,11 +1,3 @@
-#ifdef CONFIG_ARCH_MPC8349
-#define TSEC1_MODE_SHIFT 17
-#define TSEC2_MODE_SHIFT 19
-#else
-#define TSEC1_MODE_SHIFT 18
-#define TSEC2_MODE_SHIFT 21
-#endif
-
 #define CONFIG_SYS_HRCW_LOW (\
 	(CONFIG_LBMC_CLOCK_MODE << (31 - 0)) |\
 	(CONFIG_DDR_MC_CLOCK_MODE << (31 - 1)) |\
@ -28,8 +20,8 @@
 	(CONFIG_BOOT_SEQUENCER << (31 - 7)) |\
 	(CONFIG_SOFTWARE_WATCHDOG << (31 - 8)) |\
 	(CONFIG_BOOT_ROM_INTERFACE << (31 - 13)) |\
-	(CONFIG_TSEC1_MODE << (31 - TSEC1_MODE_SHIFT)) |\
-	(CONFIG_TSEC2_MODE << (31 - TSEC2_MODE_SHIFT)) |\
+	(CONFIG_TSEC1_MODE << (31 - 18)) |\
+	(CONFIG_TSEC2_MODE << (31 - 21)) |\
 	(CONFIG_SECONDARY_DDR_IO << (31 - 27)) |\
 	(CONFIG_TRUE_LITTLE_ENDIAN << (31 - 28)) |\
 	(CONFIG_LALE_TIMING << (31 - 29)) |\
--- a/arch/powerpc/cpu/mpc83xx/initreg/Kconfig.spcr
+++ b/arch/powerpc/cpu/mpc83xx/initreg/Kconfig.spcr
@ -38,50 +38,6 @@ endchoice

 endif

-if ARCH_MPC8349
-
-choice
-	prompt "TSEC1 emergency priority"
-
-config SPCR_TSEC1EP_UNSET
-	bool "Don't set value"
-
-config SPCR_TSEC1EP_0
-	bool "Level 0 (lowest priority)"
-
-config SPCR_TSEC1EP_1
-	bool "Level 1"
-
-config SPCR_TSEC1EP_2
-	bool "Level 2"
-
-config SPCR_TSEC1EP_3
-	bool "Level 3 (highest priority)"
-
-endchoice
-
-choice
-	prompt "TSEC2 emergency priority"
-
-config SPCR_TSEC2EP_UNSET
-	bool "Don't set value"
-
-config SPCR_TSEC2EP_0
-	bool "Level 0 (lowest priority)"
-
-config SPCR_TSEC2EP_1
-	bool "Level 1"
-
-config SPCR_TSEC2EP_2
-	bool "Level 2"
-
-config SPCR_TSEC2EP_3
-	bool "Level 3 (highest priority)"
-
-endchoice
-
-endif
-
 config SPCR_OPT
 	hex
 	default 0x0 if SPCR_OPT_UNSET
--- a/board/CarMediaLab/flea3/Kconfig
+++ b/board/CarMediaLab/flea3/Kconfig
@ -1,15 +0,0 @@
-if TARGET_FLEA3
-
-config SYS_BOARD
-	default "flea3"
-
-config SYS_VENDOR
-	default "CarMediaLab"
-
-config SYS_SOC
-	default "mx35"
-
-config SYS_CONFIG_NAME
-	default "flea3"
-
-endif
--- a/board/CarMediaLab/flea3/MAINTAINERS
+++ b/board/CarMediaLab/flea3/MAINTAINERS
@ -1,6 +0,0 @@
-FLEA3 BOARD
-M:	Stefano Babic <sbabic@denx.de>
-S:	Maintained
-F:	board/CarMediaLab/flea3/
-F:	include/configs/flea3.h
-F:	configs/flea3_defconfig
--- a/board/CarMediaLab/flea3/Makefile
+++ b/board/CarMediaLab/flea3/Makefile
@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
-#
-# (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
-
-obj-y	:= flea3.o
-obj-y	+= lowlevel_init.o
--- a/board/CarMediaLab/flea3/flea3.c
+++ b/board/CarMediaLab/flea3/flea3.c
@ -1,227 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
- *
- * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
- *
- * Copyright (C) 2011, Stefano Babic <sbabic@denx.de>
- */
-
-#include <common.h>
-#include <init.h>
-#include <asm/global_data.h>
-#include <asm/io.h>
-#include <env.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/crm_regs.h>
-#include <asm/arch/iomux-mx35.h>
-#include <i2c.h>
-#include <linux/types.h>
-#include <asm/gpio.h>
-#include <asm/arch/sys_proto.h>
-#include <netdev.h>
-#include <fdt_support.h>
-#include <mtd_node.h>
-#include <jffs2/load_kernel.h>
-
-#ifndef CONFIG_BOARD_EARLY_INIT_F
-#error "CONFIG_BOARD_EARLY_INIT_F must be set for this board"
-#endif
-
-#define CCM_CCMR_CONFIG		0x003F4208
-
-#define ESDCTL_DDR2_CONFIG	0x007FFC3F
-
-static inline void dram_wait(unsigned int count)
-{
-	volatile unsigned int wait = count;
-
-	while (wait--)
-		;
-}
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int dram_init(void)
-{
-	gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1,
-		PHYS_SDRAM_1_SIZE);
-
-	return 0;
-}
-
-static void board_setup_sdram(void)
-{
-	struct esdc_regs *esdc = (struct esdc_regs *)ESDCTL_BASE_ADDR;
-
-	/* Initialize with default values both CSD0/1 */
-	writel(0x2000, &esdc->esdctl0);
-	writel(0x2000, &esdc->esdctl1);
-
-
-	mx3_setup_sdram_bank(CSD0_BASE_ADDR, ESDCTL_DDR2_CONFIG,
-			     13, 10, 2, 0x8080);
-}
-
-static void setup_iomux_uart3(void)
-{
-	static const iomux_v3_cfg_t uart3_pads[] = {
-		MX35_PAD_RTS2__UART3_RXD_MUX,
-		MX35_PAD_CTS2__UART3_TXD_MUX,
-	};
-
-	imx_iomux_v3_setup_multiple_pads(uart3_pads, ARRAY_SIZE(uart3_pads));
-}
-
-#define I2C_PAD_CTRL	(PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | PAD_CTL_ODE)
-
-static void setup_iomux_i2c(void)
-{
-	static const iomux_v3_cfg_t i2c_pads[] = {
-		NEW_PAD_CTRL(MX35_PAD_I2C1_CLK__I2C1_SCL, I2C_PAD_CTRL),
-		NEW_PAD_CTRL(MX35_PAD_I2C1_DAT__I2C1_SDA, I2C_PAD_CTRL),
-
-		NEW_PAD_CTRL(MX35_PAD_TX3_RX2__I2C3_SCL, I2C_PAD_CTRL),
-		NEW_PAD_CTRL(MX35_PAD_TX2_RX3__I2C3_SDA, I2C_PAD_CTRL),
-	};
-
-	imx_iomux_v3_setup_multiple_pads(i2c_pads, ARRAY_SIZE(i2c_pads));
-}
-
-
-static void setup_iomux_spi(void)
-{
-	static const iomux_v3_cfg_t spi_pads[] = {
-		MX35_PAD_CSPI1_MOSI__CSPI1_MOSI,
-		MX35_PAD_CSPI1_MISO__CSPI1_MISO,
-		MX35_PAD_CSPI1_SS0__CSPI1_SS0,
-		MX35_PAD_CSPI1_SS1__CSPI1_SS1,
-		MX35_PAD_CSPI1_SCLK__CSPI1_SCLK,
-	};
-
-	imx_iomux_v3_setup_multiple_pads(spi_pads, ARRAY_SIZE(spi_pads));
-}
-
-static void setup_iomux_fec(void)
-{
-	static const iomux_v3_cfg_t fec_pads[] = {
-		MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
-		MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
-		MX35_PAD_FEC_RX_DV__FEC_RX_DV,
-		MX35_PAD_FEC_COL__FEC_COL,
-		MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
-		MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
-		MX35_PAD_FEC_TX_EN__FEC_TX_EN,
-		MX35_PAD_FEC_MDC__FEC_MDC,
-		MX35_PAD_FEC_MDIO__FEC_MDIO,
-		MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
-		MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
-		MX35_PAD_FEC_CRS__FEC_CRS,
-		MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
-		MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
-		MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
-		MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
-		MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
-		MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
-		/* GPIO used to power off ethernet */
-		MX35_PAD_STXFS4__GPIO2_31,
-	};
-
-	/* setup pins for FEC */
-	imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
-}
-
-int board_early_init_f(void)
-{
-	struct ccm_regs *ccm =
-		(struct ccm_regs *)IMX_CCM_BASE;
-
-	/* setup GPIO3_1 to set HighVCore signal */
-	imx_iomux_v3_setup_pad(MX35_PAD_ATA_DA1__GPIO3_1);
-	gpio_direction_output(65, 1);
-
-	/* initialize PLL and clock configuration */
-	writel(CCM_CCMR_CONFIG, &ccm->ccmr);
-
-	writel(CCM_MPLL_532_HZ, &ccm->mpctl);
-	writel(CCM_PPLL_300_HZ, &ccm->ppctl);
-
-	/* Set the core to run at 532 Mhz */
-	writel(0x00001000, &ccm->pdr0);
-
-	/* Set-up RAM */
-	board_setup_sdram();
-
-	/* enable clocks */
-	writel(readl(&ccm->cgr0) |
-		MXC_CCM_CGR0_EMI_MASK |
-		MXC_CCM_CGR0_EDIO_MASK |
-		MXC_CCM_CGR0_EPIT1_MASK,
-		&ccm->cgr0);
-
-	writel(readl(&ccm->cgr1) |
-		MXC_CCM_CGR1_FEC_MASK |
-		MXC_CCM_CGR1_GPIO1_MASK |
-		MXC_CCM_CGR1_GPIO2_MASK |
-		MXC_CCM_CGR1_GPIO3_MASK |
-		MXC_CCM_CGR1_I2C1_MASK |
-		MXC_CCM_CGR1_I2C2_MASK |
-		MXC_CCM_CGR1_I2C3_MASK,
-		&ccm->cgr1);
-
-	/* Set-up NAND */
-	__raw_writel(readl(&ccm->rcsr) | MXC_CCM_RCSR_NFC_FMS, &ccm->rcsr);
-
-	/* Set pinmux for the required peripherals */
-	setup_iomux_uart3();
-	setup_iomux_i2c();
-	setup_iomux_fec();
-	setup_iomux_spi();
-
-	return 0;
-}
-
-int board_init(void)
-{
-	/* address of boot parameters */
-	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
-	/* Enable power for ethernet */
-	gpio_direction_output(63, 0);
-
-	udelay(2000);
-
-	return 0;
-}
-
-#ifdef CONFIG_REVISION_TAG
-u32 get_board_rev(void)
-{
-	int rev = 0;
-
-	return (get_cpu_rev() & ~(0xF << 8)) | (rev & 0xF) << 8;
-}
-#endif
-
-/*
- * called prior to booting kernel or by 'fdt boardsetup' command
- *
- */
-int ft_board_setup(void *blob, struct bd_info *bd)
-{
-	static const struct node_info nodes[] = {
-		{ "physmap-flash.0", MTD_DEV_TYPE_NOR, },  /* NOR flash */
-		{ "mxc_nand", MTD_DEV_TYPE_NAND, }, /* NAND flash */
-	};
-
-	if (env_get("fdt_noauto")) {
-		puts("   Skiping ft_board_setup (fdt_noauto defined)\n");
-		return 0;
-	}
-
-	fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
-
-	return 0;
-}
--- a/board/CarMediaLab/flea3/lowlevel_init.S
+++ b/board/CarMediaLab/flea3/lowlevel_init.S
@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
- *
- * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
- *
- * Copyright (C) 2011, Stefano Babic <sbabic@denx.de>
- */
-
-#include <config.h>
-#include <asm/arch/lowlevel_macro.S>
-
-.globl lowlevel_init
-lowlevel_init:
-
-	core_init
-
-	init_aips
-
-	init_max
-
-	init_m3if
-
-	mov pc, lr
--- a/board/Marvell/aspenite/Kconfig
+++ b/board/Marvell/aspenite/Kconfig
@ -1,15 +0,0 @@
-if TARGET_ASPENITE
-
-config SYS_BOARD
-	default "aspenite"
-
-config SYS_VENDOR
-	default "Marvell"
-
-config SYS_SOC
-	default "armada100"
-
-config SYS_CONFIG_NAME
-	default "aspenite"
-
-endif
--- a/board/Marvell/aspenite/MAINTAINERS
+++ b/board/Marvell/aspenite/MAINTAINERS
@ -1,6 +0,0 @@
-ASPENITE BOARD
-M:	Prafulla Wadaskar <prafulla@marvell.com>
-S:	Maintained
-F:	board/Marvell/aspenite/
-F:	include/configs/aspenite.h
-F:	configs/aspenite_defconfig
--- a/board/Marvell/aspenite/Makefile
+++ b/board/Marvell/aspenite/Makefile
@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2010
-# Marvell Semiconductor <www.marvell.com>
-# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
-# Contributor: Mahavir Jain <mjain@marvell.com>
-
-obj-y	:= aspenite.o
--- a/board/Marvell/aspenite/aspenite.c
+++ b/board/Marvell/aspenite/aspenite.c
@ -1,45 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2010
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- * Contributor: Mahavir Jain <mjain@marvell.com>
- */
-
-#include <common.h>
-#include <init.h>
-#include <mvmfp.h>
-#include <asm/global_data.h>
-#include <asm/mach-types.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/mfp.h>
-#include <asm/arch/armada100.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_early_init_f(void)
-{
-	u32 mfp_cfg[] = {
-		/* I2C */
-		MFP105_CI2C_SDA,
-		MFP106_CI2C_SCL,
-
-		/* Enable Console on UART1 */
-		MFP107_UART1_RXD,
-		MFP108_UART1_TXD,
-
-		MFP_EOC		/*End of configureation*/
-	};
-	/* configure MFP's */
-	mfp_config(mfp_cfg);
-	return 0;
-}
-
-int board_init(void)
-{
-	/* arch number of Board */
-	gd->bd->bi_arch_number = MACH_TYPE_ASPENITE;
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = armd1_sdram_base(0) + 0x100;
-	return 0;
-}
--- a/board/freescale/mpc8349emds/Kconfig
+++ b/board/freescale/mpc8349emds/Kconfig
@ -1,25 +0,0 @@
-if TARGET_MPC8349EMDS
-
-config SYS_BOARD
-	default "mpc8349emds"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_CONFIG_NAME
-	default "MPC8349EMDS"
-
-endif
-
-if TARGET_MPC8349EMDS_SDRAM
-
-config SYS_BOARD
-	default "mpc8349emds"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_CONFIG_NAME
-	default "MPC8349EMDS_SDRAM"
-
-endif
--- a/board/freescale/mpc8349emds/MAINTAINERS
+++ b/board/freescale/mpc8349emds/MAINTAINERS
@ -1,9 +0,0 @@
-MPC8349EMDS BOARD
-#M:	Kim Phillips <kim.phillips@freescale.com>
-S:	Orphan (since 2018-05)
-F:	board/freescale/mpc8349emds/
-F:	include/configs/MPC8349EMDS.h
-F:	configs/MPC8349EMDS_defconfig
-F:	configs/MPC8349EMDS_SDRAM_defconfig
-F:	configs/MPC8349EMDS_PCI64_defconfig
-F:	configs/MPC8349EMDS_SLAVE_defconfig
--- a/board/freescale/mpc8349emds/Makefile
+++ b/board/freescale/mpc8349emds/Makefile
@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-
-obj-y += mpc8349emds.o
-obj-$(CONFIG_PCI) += pci.o
-obj-$(CONFIG_SYS_FSL_DDR2) += ddr.o
--- a/board/freescale/mpc8349emds/ddr.c
+++ b/board/freescale/mpc8349emds/ddr.c
@ -1,100 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-
-#include <fsl_ddr_sdram.h>
-#include <fsl_ddr_dimm_params.h>
-
-struct board_specific_parameters {
-	u32 n_ranks;
-	u32 datarate_mhz_high;
-	u32 clk_adjust;
-	u32 cpo;
-	u32 write_data_delay;
-	u32 force_2t;
-};
-
-/*
- * This table contains all valid speeds we want to override with board
- * specific parameters. datarate_mhz_high values need to be in ascending order
- * for each n_ranks group.
- */
-static const struct board_specific_parameters udimm0[] = {
-	/*
-	 * memory controller 0
-	 *   num|  hi|  clk| cpo|wrdata|2T
-	 * ranks| mhz|adjst|    | delay|
-	 */
-	{2,  300,    4,   4,    2,  0},
-	{2,  365,    4,   6,    2,  0},
-	{2,  450,    4,   7,    2,  0},
-	{2,  850,    4,  31,    2,  0},
-	{1,  300,    4,   4,    2,  0},
-	{1,  365,    4,   6,    2,  0},
-	{1,  450,    4,   7,    2,  0},
-	{1,  850,    4,  31,    2,  0},
-	{}
-};
-
-void fsl_ddr_board_options(memctl_options_t *popts,
-				dimm_params_t *pdimm,
-				unsigned int ctrl_num)
-{
-	const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
-	unsigned int i;
-	ulong ddr_freq;
-
-	if (ctrl_num != 0)	/* we have only one controller */
-		return;
-	for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
-		if (pdimm[i].n_ranks)
-			break;
-	}
-	if (i >= CONFIG_DIMM_SLOTS_PER_CTLR)	/* no DIMM */
-		return;
-
-	pbsp = udimm0;
-
-	/* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
-	 * freqency and n_banks specified in board_specific_parameters table.
-	 */
-	ddr_freq = get_ddr_freq(0) / 1000000;
-	while (pbsp->datarate_mhz_high) {
-		if (pbsp->n_ranks ==  pdimm[i].n_ranks) {
-			if (ddr_freq <= pbsp->datarate_mhz_high) {
-				popts->clk_adjust = pbsp->clk_adjust;
-				popts->cpo_override = pbsp->cpo;
-				popts->write_data_delay =
-					pbsp->write_data_delay;
-				popts->twot_en = pbsp->force_2t;
-				goto found;
-			}
-			pbsp_highest = pbsp;
-		}
-		pbsp++;
-	}
-
-	if (pbsp_highest) {
-		printf("Error: board specific timing not found "
-			"for data rate %lu MT/s!\n"
-			"Trying to use the highest speed (%u) parameters\n",
-			ddr_freq, pbsp_highest->datarate_mhz_high);
-		popts->clk_adjust = pbsp_highest->clk_adjust;
-		popts->cpo_override = pbsp_highest->cpo;
-		popts->write_data_delay = pbsp_highest->write_data_delay;
-		popts->twot_en = pbsp_highest->force_2t;
-	} else {
-		panic("DIMM is not supported by this board");
-	}
-
-found:
-	/*
-	 * Factors to consider for half-strength driver enable:
-	 *	- number of DIMMs installed
-	 */
-	popts->half_strength_driver_enable = 0;
-	popts->dqs_config = 0;	/* only true DQS signal is used on board */
-}
--- a/board/freescale/mpc8349emds/mpc8349emds.c
+++ b/board/freescale/mpc8349emds/mpc8349emds.c
@ -1,277 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- */
-
-#include <common.h>
-#include <fdt_support.h>
-#include <init.h>
-#include <ioports.h>
-#include <mpc83xx.h>
-#include <asm/bitops.h>
-#include <asm/global_data.h>
-#include <asm/mpc8349_pci.h>
-#include <i2c.h>
-#include <spi.h>
-#include <miiphy.h>
-#ifdef CONFIG_SYS_FSL_DDR2
-#include <fsl_ddr_sdram.h>
-#else
-#include <spd_sdram.h>
-#endif
-#include <linux/delay.h>
-
-#if defined(CONFIG_OF_LIBFDT)
-#include <linux/libfdt.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int fixed_sdram(void);
-void sdram_init(void);
-
-#if defined(CONFIG_DDR_ECC) && defined(CONFIG_MPC83xx)
-void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
-int board_early_init_f (void)
-{
-	volatile u8* bcsr = (volatile u8*)CONFIG_SYS_BCSR;
-
-	/* Enable flash write */
-	bcsr[1] &= ~0x01;
-
-#ifdef CONFIG_SYS_USE_MPC834XSYS_USB_PHY
-	/* Use USB PHY on SYS board */
-	bcsr[5] |= 0x02;
-#endif
-
-	return 0;
-}
-
-int dram_init(void)
-{
-	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	phys_size_t msize = 0;
-
-	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
-		return -ENXIO;
-
-	/* DDR SDRAM - Main SODIMM */
-	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_SDRAM_BASE & LAWBAR_BAR;
-#if defined(CONFIG_SPD_EEPROM)
-#ifndef CONFIG_SYS_FSL_DDR2
-	msize = spd_sdram() * 1024 * 1024;
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	ddr_enable_ecc(msize);
-#endif
-#else
-	msize = fsl_ddr_sdram();
-#endif
-#else
-	msize = fixed_sdram() * 1024 * 1024;
-#endif
-	/*
-	 * Initialize SDRAM if it is on local bus.
-	 */
-	sdram_init();
-
-	/* set total bus SDRAM size(bytes)  -- DDR */
-	gd->ram_size = msize;
-
-	return 0;
-}
-
-#if !defined(CONFIG_SPD_EEPROM)
-/*************************************************************************
- *  fixed sdram init -- doesn't use serial presence detect.
- ************************************************************************/
-int fixed_sdram(void)
-{
-	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	u32 msize = CONFIG_SYS_DDR_SIZE;
-	u32 ddr_size = msize << 20;	/* DDR size in bytes */
-	u32 ddr_size_log2 = __ilog2(ddr_size);
-
-	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_SDRAM_BASE & 0xfffff000;
-	im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
-
-#if (CONFIG_SYS_DDR_SIZE != 256)
-#warning Currenly any ddr size other than 256 is not supported
-#endif
-#if ((CONFIG_SYS_SDRAM_BASE & 0x00FFFFFF) != 0)
-#warning Chip select bounds is only configurable in 16MB increments
-#endif
-	im->ddr.csbnds[2].csbnds =
-		((CONFIG_SYS_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) |
-		(((CONFIG_SYS_SDRAM_BASE + ddr_size - 1) >>
-				CSBNDS_EA_SHIFT) & CSBNDS_EA);
-	im->ddr.cs_config[2] = CONFIG_SYS_DDR_CS2_CONFIG;
-
-	/* currently we use only one CS, so disable the other banks */
-	im->ddr.cs_config[0] = 0;
-	im->ddr.cs_config[1] = 0;
-	im->ddr.cs_config[3] = 0;
-
-	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
-	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
-
-	im->ddr.sdram_cfg =
-		SDRAM_CFG_SREN
-		| 2 << SDRAM_CFG_SDRAM_TYPE_SHIFT;
-	im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
-
-	im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
-	udelay(200);
-
-	/* enable DDR controller */
-	im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
-	return msize;
-}
-#endif/*!CONFIG_SYS_SPD_EEPROM*/
-
-
-int checkboard (void)
-{
-	/*
-	 * Warning: do not read the BCSR registers here
-	 *
-	 * There is a timing bug in the 8349E and 8349EA BCSR code
-	 * version 1.2 (read from BCSR 11) that will cause the CFI
-	 * flash initialization code to overwrite BCSR 0, disabling
-	 * the serial ports and gigabit ethernet
-	 */
-
-	puts("Board: Freescale MPC8349EMDS\n");
-	return 0;
-}
-
-/*
- * if MPC8349EMDS is soldered with SDRAM
- */
-#if defined(CONFIG_SYS_BR2_PRELIM)  \
-	&& defined(CONFIG_SYS_OR2_PRELIM) \
-	&& defined(CONFIG_SYS_LBLAWBAR2_PRELIM) \
-	&& defined(CONFIG_SYS_LBLAWAR2_PRELIM)
-/*
- * Initialize SDRAM memory on the Local Bus.
- */
-
-void sdram_init(void)
-{
-	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
-	volatile fsl_lbc_t *lbc = &immap->im_lbc;
-	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
-	const u32 lsdmr_common = LSDMR_RFEN | LSDMR_BSMA1516 | LSDMR_RFCR8 |
-				 LSDMR_PRETOACT6 | LSDMR_ACTTORW3 | LSDMR_BL8 |
-				 LSDMR_WRC3 | LSDMR_CL3;
-	/*
-	 * Setup SDRAM Base and Option Registers, already done in cpu_init.c
-	 */
-
-	/* setup mtrpt, lsrt and lbcr for LB bus */
-	lbc->lbcr = 0x00000000;
-	/* LB refresh timer prescal, 266MHz/32 */
-	lbc->mrtpr = 0x20000000;
-	/* LB sdram refresh timer, about 6us */
-	lbc->lsrt = 0x32000000;
-	asm("sync");
-
-	/*
-	 * Configure the SDRAM controller Machine Mode Register.
-	 */
-
-	/* 0x40636733; normal operation */
-	lbc->lsdmr = lsdmr_common | LSDMR_OP_NORMAL;
-
-	/* 0x68636733; precharge all the banks */
-	lbc->lsdmr = lsdmr_common | LSDMR_OP_PCHALL;
-	asm("sync");
-	*sdram_addr = 0xff;
-	udelay(100);
-
-	/* 0x48636733; auto refresh */
-	lbc->lsdmr = lsdmr_common | LSDMR_OP_ARFRSH;
-	asm("sync");
-	/*1 times*/
-	*sdram_addr = 0xff;
-	udelay(100);
-	/*2 times*/
-	*sdram_addr = 0xff;
-	udelay(100);
-	/*3 times*/
-	*sdram_addr = 0xff;
-	udelay(100);
-	/*4 times*/
-	*sdram_addr = 0xff;
-	udelay(100);
-	/*5 times*/
-	*sdram_addr = 0xff;
-	udelay(100);
-	/*6 times*/
-	*sdram_addr = 0xff;
-	udelay(100);
-	/*7 times*/
-	*sdram_addr = 0xff;
-	udelay(100);
-	/*8 times*/
-	*sdram_addr = 0xff;
-	udelay(100);
-
-	/* 0x58636733; mode register write operation */
-	lbc->lsdmr = lsdmr_common | LSDMR_OP_MRW;
-	asm("sync");
-	*sdram_addr = 0xff;
-	udelay(100);
-
-	/* 0x40636733; normal operation */
-	lbc->lsdmr = lsdmr_common | LSDMR_OP_NORMAL;
-	asm("sync");
-	*sdram_addr = 0xff;
-	udelay(100);
-}
-#else
-void sdram_init(void)
-{
-}
-#endif
-
-/*
- * The following are used to control the SPI chip selects for the SPI command.
- */
-#ifdef CONFIG_MPC8XXX_SPI
-
-#define SPI_CS_MASK	0x80000000
-
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
-	return bus == 0 && cs == 0;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
-	volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
-
-	iopd->dat &= ~SPI_CS_MASK;
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
-	volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
-
-	iopd->dat |=  SPI_CS_MASK;
-}
-#endif
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-int ft_board_setup(void *blob, struct bd_info *bd)
-{
-	ft_cpu_setup(blob, bd);
-#ifdef CONFIG_PCI
-	ft_pci_setup(blob, bd);
-#endif
-
-	return 0;
-}
-#endif
--- a/board/freescale/mpc8349emds/pci.c
+++ b/board/freescale/mpc8349emds/pci.c
@ -1,118 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2006-2009 Freescale Semiconductor, Inc.
- */
-
-#include <init.h>
-#include <asm/mmu.h>
-#include <asm/io.h>
-#include <common.h>
-#include <mpc83xx.h>
-#include <pci.h>
-#include <i2c.h>
-#include <asm/fsl_i2c.h>
-#include <linux/delay.h>
-
-static struct pci_region pci1_regions[] = {
-	{
-		bus_start: CONFIG_SYS_PCI1_MEM_BASE,
-		phys_start: CONFIG_SYS_PCI1_MEM_PHYS,
-		size: CONFIG_SYS_PCI1_MEM_SIZE,
-		flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
-	},
-	{
-		bus_start: CONFIG_SYS_PCI1_IO_BASE,
-		phys_start: CONFIG_SYS_PCI1_IO_PHYS,
-		size: CONFIG_SYS_PCI1_IO_SIZE,
-		flags: PCI_REGION_IO
-	},
-	{
-		bus_start: CONFIG_SYS_PCI1_MMIO_BASE,
-		phys_start: CONFIG_SYS_PCI1_MMIO_PHYS,
-		size: CONFIG_SYS_PCI1_MMIO_SIZE,
-		flags: PCI_REGION_MEM
-	},
-};
-
-#ifdef CONFIG_MPC83XX_PCI2
-static struct pci_region pci2_regions[] = {
-	{
-		bus_start: CONFIG_SYS_PCI2_MEM_BASE,
-		phys_start: CONFIG_SYS_PCI2_MEM_PHYS,
-		size: CONFIG_SYS_PCI2_MEM_SIZE,
-		flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
-	},
-	{
-		bus_start: CONFIG_SYS_PCI2_IO_BASE,
-		phys_start: CONFIG_SYS_PCI2_IO_PHYS,
-		size: CONFIG_SYS_PCI2_IO_SIZE,
-		flags: PCI_REGION_IO
-	},
-	{
-		bus_start: CONFIG_SYS_PCI2_MMIO_BASE,
-		phys_start: CONFIG_SYS_PCI2_MMIO_PHYS,
-		size: CONFIG_SYS_PCI2_MMIO_SIZE,
-		flags: PCI_REGION_MEM
-	},
-};
-#endif
-
-#ifndef CONFIG_PCISLAVE
-void pib_init(void)
-{
-	u8 val8, orig_i2c_bus;
-	/*
-	 * Assign PIB PMC slot to desired PCI bus
-	 */
-	/* Switch temporarily to I2C bus #2 */
-	orig_i2c_bus = i2c_get_bus_num();
-	i2c_set_bus_num(1);
-
-	val8 = 0;
-	i2c_write(0x23, 0x6, 1, &val8, 1);
-	i2c_write(0x23, 0x7, 1, &val8, 1);
-	val8 = 0xff;
-	i2c_write(0x23, 0x2, 1, &val8, 1);
-	i2c_write(0x23, 0x3, 1, &val8, 1);
-
-	val8 = 0;
-	i2c_write(0x26, 0x6, 1, &val8, 1);
-	val8 = 0x34;
-	i2c_write(0x26, 0x7, 1, &val8, 1);
-#if defined(CONFIG_PCI_64BIT)
-	val8 = 0xf4;	/* PMC2:PCI1/64-bit */
-#elif defined(CONFIG_PCI_ALL_PCI1)
-	val8 = 0xf3;	/* PMC1:PCI1 PMC2:PCI1 PMC3:PCI1 */
-#elif defined(CONFIG_PCI_ONE_PCI1)
-	val8 = 0xf9;	/* PMC1:PCI1 PMC2:PCI2 PMC3:PCI2 */
-#else
-	val8 = 0xf5;	/* PMC1:PCI1 PMC2:PCI1 PMC3:PCI2 */
-#endif
-	i2c_write(0x26, 0x2, 1, &val8, 1);
-	val8 = 0xff;
-	i2c_write(0x26, 0x3, 1, &val8, 1);
-	val8 = 0;
-	i2c_write(0x27, 0x6, 1, &val8, 1);
-	i2c_write(0x27, 0x7, 1, &val8, 1);
-	val8 = 0xff;
-	i2c_write(0x27, 0x2, 1, &val8, 1);
-	val8 = 0xef;
-	i2c_write(0x27, 0x3, 1, &val8, 1);
-	asm("eieio");
-
-#if defined(CONFIG_PCI_64BIT)
-	printf("PCI1: 64-bit on PMC2\n");
-#elif defined(CONFIG_PCI_ALL_PCI1)
-	printf("PCI1: 32-bit on PMC1, PMC2, PMC3\n");
-#elif defined(CONFIG_PCI_ONE_PCI1)
-	printf("PCI1: 32-bit on PMC1\n");
-	printf("PCI2: 32-bit on PMC2, PMC3\n");
-#else
-	printf("PCI1: 32-bit on PMC1, PMC2\n");
-	printf("PCI2: 32-bit on PMC3\n");
-#endif
-	/* Reset to original I2C bus */
-	i2c_set_bus_num(orig_i2c_bus);
-}
-
-#endif /* CONFIG_PCISLAVE */
--- a/board/ppcag/bg0900/Kconfig
+++ b/board/ppcag/bg0900/Kconfig
@ -1,15 +0,0 @@
-if TARGET_BG0900
-
-config SYS_BOARD
-	default "bg0900"
-
-config SYS_VENDOR
-	default "ppcag"
-
-config SYS_SOC
-	default "mxs"
-
-config SYS_CONFIG_NAME
-	default "bg0900"
-
-endif
--- a/board/ppcag/bg0900/MAINTAINERS
+++ b/board/ppcag/bg0900/MAINTAINERS
@ -1,6 +0,0 @@
-BG0900 BOARD
-M:	Marek Vasut <marex@denx.de>
-S:	Maintained
-F:	board/ppcag/bg0900/
-F:	include/configs/bg0900.h
-F:	configs/bg0900_defconfig
--- a/board/ppcag/bg0900/Makefile
+++ b/board/ppcag/bg0900/Makefile
@ -1,10 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-
-ifndef	CONFIG_SPL_BUILD
-obj-y	:= bg0900.o
-else
-obj-y	:= spl_boot.o
-endif
--- a/board/ppcag/bg0900/bg0900.c
+++ b/board/ppcag/bg0900/bg0900.c
@ -1,89 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * PPC-AG BG0900 board
- *
- * Copyright (C) 2013 Marek Vasut <marex@denx.de>
- */
-
-#include <common.h>
-#include <init.h>
-#include <net.h>
-#include <asm/global_data.h>
-#include <asm/gpio.h>
-#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/iomux-mx28.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sys_proto.h>
-#include <linux/delay.h>
-#include <linux/mii.h>
-#include <miiphy.h>
-#include <netdev.h>
-#include <errno.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Functions
- */
-int board_early_init_f(void)
-{
-	/* IO0 clock at 480MHz */
-	mxs_set_ioclk(MXC_IOCLK0, 480000);
-	/* IO1 clock at 480MHz */
-	mxs_set_ioclk(MXC_IOCLK1, 480000);
-
-	/* SSP2 clock at 160MHz */
-	mxs_set_sspclk(MXC_SSPCLK2, 160000, 0);
-
-	return 0;
-}
-
-int dram_init(void)
-{
-	return mxs_dram_init();
-}
-
-int board_init(void)
-{
-	/* Adress of boot parameters */
-	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
-	return 0;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(struct bd_info *bis)
-{
-	struct mxs_clkctrl_regs *clkctrl_regs =
-		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
-	struct eth_device *dev;
-	int ret;
-
-	ret = cpu_eth_init(bis);
-
-	/* BG0900 uses ENET_CLK PAD to drive FEC clock */
-	writel(CLKCTRL_ENET_TIME_SEL_RMII_CLK | CLKCTRL_ENET_CLK_OUT_EN,
-	       &clkctrl_regs->hw_clkctrl_enet);
-
-	/* Reset FEC PHYs */
-	gpio_direction_output(MX28_PAD_ENET0_RX_CLK__GPIO_4_13, 0);
-	udelay(200);
-	gpio_set_value(MX28_PAD_ENET0_RX_CLK__GPIO_4_13, 1);
-
-	ret = fecmxc_initialize_multi(bis, 0, 0, MXS_ENET0_BASE);
-	if (ret) {
-		puts("FEC MXS: Unable to init FEC0\n");
-		return ret;
-	}
-
-	dev = eth_get_dev_by_name("FEC0");
-	if (!dev) {
-		puts("FEC MXS: Unable to get FEC0 device entry\n");
-		return -EINVAL;
-	}
-
-	return ret;
-}
-
-#endif
--- a/board/ppcag/bg0900/spl_boot.c
+++ b/board/ppcag/bg0900/spl_boot.c
@ -1,152 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * PPC-AG BG0900 Boot setup
- *
- * Copyright (C) 2013 Marek Vasut <marex@denx.de>
- */
-
-#include <common.h>
-#include <config.h>
-#include <asm/io.h>
-#include <asm/arch/iomux-mx28.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/sys_proto.h>
-
-#define	MUX_CONFIG_GPMI	(MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
-#define	MUX_CONFIG_ENET	(MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
-#define	MUX_CONFIG_EMI	(MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL)
-#define	MUX_CONFIG_SSP2	(MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
-
-const iomux_cfg_t iomux_setup[] = {
-	/* DUART */
-	MX28_PAD_PWM0__DUART_RX,
-	MX28_PAD_PWM1__DUART_TX,
-
-	/* GPMI NAND */
-	MX28_PAD_GPMI_D00__GPMI_D0 | MUX_CONFIG_GPMI,
-	MX28_PAD_GPMI_D01__GPMI_D1 | MUX_CONFIG_GPMI,
-	MX28_PAD_GPMI_D02__GPMI_D2 | MUX_CONFIG_GPMI,
-	MX28_PAD_GPMI_D03__GPMI_D3 | MUX_CONFIG_GPMI,
-	MX28_PAD_GPMI_D04__GPMI_D4 | MUX_CONFIG_GPMI,
-	MX28_PAD_GPMI_D05__GPMI_D5 | MUX_CONFIG_GPMI,
-	MX28_PAD_GPMI_D06__GPMI_D6 | MUX_CONFIG_GPMI,
-	MX28_PAD_GPMI_D07__GPMI_D7 | MUX_CONFIG_GPMI,
-	MX28_PAD_GPMI_CE0N__GPMI_CE0N | MUX_CONFIG_GPMI,
-	MX28_PAD_GPMI_RDY0__GPMI_READY0 | MUX_CONFIG_GPMI,
-	MX28_PAD_GPMI_RDN__GPMI_RDN |
-		(MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_WRN__GPMI_WRN | MUX_CONFIG_GPMI,
-	MX28_PAD_GPMI_ALE__GPMI_ALE | MUX_CONFIG_GPMI,
-	MX28_PAD_GPMI_CLE__GPMI_CLE | MUX_CONFIG_GPMI,
-	MX28_PAD_GPMI_RESETN__GPMI_RESETN | MUX_CONFIG_GPMI,
-
-	/* FEC0 */
-	MX28_PAD_ENET0_MDC__ENET0_MDC | MUX_CONFIG_ENET,
-	MX28_PAD_ENET0_MDIO__ENET0_MDIO | MUX_CONFIG_ENET,
-	MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MUX_CONFIG_ENET,
-	MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MUX_CONFIG_ENET,
-	MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MUX_CONFIG_ENET,
-	MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MUX_CONFIG_ENET,
-	MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MUX_CONFIG_ENET,
-	MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MUX_CONFIG_ENET,
-	MX28_PAD_ENET_CLK__CLKCTRL_ENET | MUX_CONFIG_ENET,
-
-	/* FEC0 Reset */
-	MX28_PAD_ENET0_RX_CLK__GPIO_4_13 |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-
-	/* EMI */
-	MX28_PAD_EMI_D00__EMI_DATA0 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D01__EMI_DATA1 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D02__EMI_DATA2 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D03__EMI_DATA3 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D04__EMI_DATA4 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D05__EMI_DATA5 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D06__EMI_DATA6 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D07__EMI_DATA7 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D08__EMI_DATA8 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D09__EMI_DATA9 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D10__EMI_DATA10 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D11__EMI_DATA11 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D12__EMI_DATA12 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D13__EMI_DATA13 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D14__EMI_DATA14 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D15__EMI_DATA15 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_ODT0__EMI_ODT0 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_DQM0__EMI_DQM0 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_ODT1__EMI_ODT1 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_DQM1__EMI_DQM1 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_CLK__EMI_CLK | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_DQS0__EMI_DQS0 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_DQS1__EMI_DQS1 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN | MUX_CONFIG_EMI,
-
-	MX28_PAD_EMI_A00__EMI_ADDR0 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A01__EMI_ADDR1 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A02__EMI_ADDR2 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A03__EMI_ADDR3 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A04__EMI_ADDR4 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A05__EMI_ADDR5 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A06__EMI_ADDR6 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A07__EMI_ADDR7 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A08__EMI_ADDR8 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A09__EMI_ADDR9 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A10__EMI_ADDR10 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A11__EMI_ADDR11 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A12__EMI_ADDR12 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A13__EMI_ADDR13 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A14__EMI_ADDR14 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_BA0__EMI_BA0 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_BA1__EMI_BA1 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_BA2__EMI_BA2 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_CASN__EMI_CASN | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_CE1N__EMI_CE1N | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI,
-
-	/* SPI2 (for SPI flash) */
-	MX28_PAD_SSP2_SCK__SSP2_SCK | MUX_CONFIG_SSP2,
-	MX28_PAD_SSP2_MOSI__SSP2_CMD | MUX_CONFIG_SSP2,
-	MX28_PAD_SSP2_MISO__SSP2_D0 | MUX_CONFIG_SSP2,
-	MX28_PAD_SSP2_SS0__SSP2_D3 |
-		(MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP),
-};
-
-void mxs_adjust_memory_params(uint32_t *dram_vals)
-{
-	/*
-	 * DDR Controller Registers
-	 * Manufacturer:	Winbond
-	 * Device Part Number:	W972GG6JB-25I
-	 * Clock Freq.:		200MHz
-	 * Density:		2Gb
-	 * Chip Selects:	1
-	 * Number of Banks:	8
-	 * Row address:		14
-	 * Column address:	10
-	 */
-
-	dram_vals[0x74 / 4] = 0x0102010A;
-	dram_vals[0x98 / 4] = 0x04005003;
-	dram_vals[0x9c / 4] = 0x090000c8;
-
-	dram_vals[0xa8 / 4] = 0x0036b009;
-	dram_vals[0xac / 4] = 0x03270612;
-
-	dram_vals[0xb0 / 4] = 0x02020202;
-	dram_vals[0xb4 / 4] = 0x00c80029;
-
-	dram_vals[0xc0 / 4] = 0x00011900;
-
-	dram_vals[0x12c / 4] = 0x07400300;
-	dram_vals[0x130 / 4] = 0x07400300;
-	dram_vals[0x2c4 / 4] = 0x02030303;
-}
-
-void board_init_ll(const uint32_t arg, const uint32_t *resptr)
-{
-	mxs_common_spl_init(arg, resptr, iomux_setup, ARRAY_SIZE(iomux_setup));
-}
--- a/board/syteco/zmx25/Kconfig
+++ b/board/syteco/zmx25/Kconfig
@ -1,15 +0,0 @@
-if TARGET_ZMX25
-
-config SYS_BOARD
-	default "zmx25"
-
-config SYS_VENDOR
-	default "syteco"
-
-config SYS_SOC
-	default "mx25"
-
-config SYS_CONFIG_NAME
-	default "zmx25"
-
-endif
--- a/board/syteco/zmx25/MAINTAINERS
+++ b/board/syteco/zmx25/MAINTAINERS
@ -1,6 +0,0 @@
-ZMX25 BOARD
-M:	Matthias Weisser <weisserm@arcor.de>
-S:	Maintained
-F:	board/syteco/zmx25/
-F:	include/configs/zmx25.h
-F:	configs/zmx25_defconfig
--- a/board/syteco/zmx25/Makefile
+++ b/board/syteco/zmx25/Makefile
@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (c) 2010 Graf-Syteco, Matthias Weisser
-# <weisserm@arcor.de>
-
-obj-y	+= zmx25.o
-obj-y	+= lowlevel_init.o
--- a/board/syteco/zmx25/lowlevel_init.S
+++ b/board/syteco/zmx25/lowlevel_init.S
@ -1,96 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2011
- * Matthias Weisser <weisserm@arcor.de>
- *
- * (C) Copyright 2009 DENX Software Engineering
- * Author: John Rigby <jrigby@gmail.com>
- *
- * Based on U-Boot and RedBoot sources for several different i.mx
- * platforms.
- */
-
-#include <asm/macro.h>
-#include <asm/arch/macro.h>
-#include <asm/arch/imx-regs.h>
-#include <generated/asm-offsets.h>
-
-/*
- * clocks
- */
-.macro init_clocks
-
-	/* disable clock output */
-	write32	IMX_CCM_BASE + CCM_MCR, 0x00000000
-	write32	IMX_CCM_BASE + CCM_CCTL, 0x50030000
-
-	/*
-	 * enable all implemented clocks in all three
-	 * clock control registers
-	 */
-	write32	IMX_CCM_BASE + CCM_CGCR0, 0x1fffffff
-	write32	IMX_CCM_BASE + CCM_CGCR1, 0xffffffff
-	write32	IMX_CCM_BASE + CCM_CGCR2, 0xfffff
-
-	/* Devide NAND clock by 32 */
-	write32	IMX_CCM_BASE + CCM_PCDR2, 0x0101011F
-.endm
-
-/*
- * sdram controller init
- */
-.macro init_lpddr
-	ldr	r0, =IMX_ESDRAMC_BASE
-	ldr	r2, =IMX_SDRAM_BANK0_BASE
-
-	/*
-	 * reset SDRAM controller
-	 * then wait for initialization to complete
-	 */
-	ldr	r1, =(1 << 1) | (1 << 2)
-	str	r1, [r0, #ESDRAMC_ESDMISC]
-1:	ldr	r3, [r0, #ESDRAMC_ESDMISC]
-	tst	r3, #(1 << 31)
-	beq	1b
-	ldr	r1, =(1 << 2)
-	str	r1, [r0, #ESDRAMC_ESDMISC]
-
-	ldr	r1, =0x002a7420
-	str	r1, [r0, #ESDRAMC_ESDCFG0]
-
-	/* control | precharge */
-	ldr	r1, =0x92216008
-	str	r1, [r0, #ESDRAMC_ESDCTL0]
-	/* dram command encoded in address */
-	str	r1, [r2, #0x400]
-
-	/* auto refresh */
-	ldr	r1, =0xa2216008
-	str	r1, [r0, #ESDRAMC_ESDCTL0]
-	/* read dram twice to auto refresh */
-	ldr	    r3, [r2]
-	ldr     r3, [r2]
-
-	/* control | load mode */
-	ldr	r1, =0xb2216008
-	str	r1, [r0, #ESDRAMC_ESDCTL0]
-
-	/* mode register of lpddram */
-	strb	r1, [r2, #0x33]
-
-	/* extended mode register of lpddrram */
-	ldr		r2, =0x81000000
-	strb	r1, [r2]
-
-	/* control | normal */
-	ldr	r1, =0x82216008
-	str	r1, [r0, #ESDRAMC_ESDCTL0]
-.endm
-
-.globl lowlevel_init
-lowlevel_init:
-	init_aips
-	init_max
-	init_clocks
-	init_lpddr
-	mov	pc, lr
--- a/board/syteco/zmx25/zmx25.c
+++ b/board/syteco/zmx25/zmx25.c
@ -1,178 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (c) 2011 Graf-Syteco, Matthias Weisser
- * <weisserm@arcor.de>
- *
- * Based on tx25.c:
- * (C) Copyright 2009 DENX Software Engineering
- * Author: John Rigby <jrigby@gmail.com>
- *
- * Based on imx27lite.c:
- *   Copyright (C) 2008,2009 Eric Jarrige <jorasse@users.sourceforge.net>
- *   Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com>
- * And:
- *   RedBoot tx25_misc.c Copyright (C) 2009 Red Hat
- */
-#include <common.h>
-#include <cpu_func.h>
-#include <env.h>
-#include <init.h>
-#include <asm/global_data.h>
-#include <asm/gpio.h>
-#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/iomux-mx25.h>
-#include <linux/delay.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_init()
-{
-	static const iomux_v3_cfg_t sdhc1_pads[] = {
-		NEW_PAD_CTRL(MX25_PAD_SD1_CMD__SD1_CMD, NO_PAD_CTRL),
-		NEW_PAD_CTRL(MX25_PAD_SD1_CLK__SD1_CLK, NO_PAD_CTRL),
-		NEW_PAD_CTRL(MX25_PAD_SD1_DATA0__SD1_DATA0, NO_PAD_CTRL),
-		NEW_PAD_CTRL(MX25_PAD_SD1_DATA1__SD1_DATA1, NO_PAD_CTRL),
-		NEW_PAD_CTRL(MX25_PAD_SD1_DATA2__SD1_DATA2, NO_PAD_CTRL),
-		NEW_PAD_CTRL(MX25_PAD_SD1_DATA3__SD1_DATA3, NO_PAD_CTRL),
-	};
-
-	static const iomux_v3_cfg_t dig_out_pads[] = {
-		MX25_PAD_CSI_D8__GPIO_1_7, /* Ouput 1 Ctrl */
-		MX25_PAD_CSI_D7__GPIO_1_6, /* Ouput 2 Ctrl */
-		NEW_PAD_CTRL(MX25_PAD_CSI_D6__GPIO_1_31, 0), /* Ouput 1 Stat */
-		NEW_PAD_CTRL(MX25_PAD_CSI_D5__GPIO_1_30, 0), /* Ouput 2 Stat */
-	};
-
-	static const iomux_v3_cfg_t led_pads[] = {
-		MX25_PAD_CSI_D9__GPIO_4_21,
-		MX25_PAD_CSI_D4__GPIO_1_29,
-	};
-
-	static const iomux_v3_cfg_t can_pads[] = {
-		NEW_PAD_CTRL(MX25_PAD_GPIO_A__CAN1_TX, NO_PAD_CTRL),
-		NEW_PAD_CTRL(MX25_PAD_GPIO_B__CAN1_RX, NO_PAD_CTRL),
-		NEW_PAD_CTRL(MX25_PAD_GPIO_C__CAN2_TX, NO_PAD_CTRL),
-		NEW_PAD_CTRL(MX25_PAD_GPIO_D__CAN2_RX, NO_PAD_CTRL),
-	};
-
-	static const iomux_v3_cfg_t i2c3_pads[] = {
-		MX25_PAD_CSPI1_SS1__I2C3_DAT,
-		MX25_PAD_GPIO_E__I2C3_CLK,
-	};
-
-	icache_enable();
-
-	/* Setup of core voltage selection pin to run at 1.4V */
-	imx_iomux_v3_setup_pad(MX25_PAD_EXT_ARMCLK__GPIO_3_15); /* VCORE */
-	gpio_direction_output(IMX_GPIO_NR(3, 15), 1);
-
-	/* Setup of SD card pins*/
-	imx_iomux_v3_setup_multiple_pads(sdhc1_pads, ARRAY_SIZE(sdhc1_pads));
-
-	/* Setup of digital output for USB power and OC */
-	imx_iomux_v3_setup_pad(MX25_PAD_CSI_D3__GPIO_1_28); /* USB Power */
-	gpio_direction_output(IMX_GPIO_NR(1, 28), 1);
-
-	imx_iomux_v3_setup_pad(MX25_PAD_CSI_D2__GPIO_1_27); /* USB OC */
-	gpio_direction_input(IMX_GPIO_NR(1, 18));
-
-	/* Setup of digital output control pins */
-	imx_iomux_v3_setup_multiple_pads(dig_out_pads,
-						ARRAY_SIZE(dig_out_pads));
-
-	/* Switch both output drivers off */
-	gpio_direction_output(IMX_GPIO_NR(1, 7), 0);
-	gpio_direction_output(IMX_GPIO_NR(1, 6), 0);
-
-	/* Setup of key input pin */
-	imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX25_PAD_KPP_ROW0__GPIO_2_29, 0));
-	gpio_direction_input(IMX_GPIO_NR(2, 29));
-
-	/* Setup of status LED outputs */
-	imx_iomux_v3_setup_multiple_pads(led_pads, ARRAY_SIZE(led_pads));
-
-	/* Switch both LEDs off */
-	gpio_direction_output(IMX_GPIO_NR(4, 21), 0);
-	gpio_direction_output(IMX_GPIO_NR(1, 29), 0);
-
-	/* Setup of CAN1 and CAN2 signals */
-	imx_iomux_v3_setup_multiple_pads(can_pads, ARRAY_SIZE(can_pads));
-
-	/* Setup of I2C3 signals */
-	imx_iomux_v3_setup_multiple_pads(i2c3_pads, ARRAY_SIZE(i2c3_pads));
-
-	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
-	return 0;
-}
-
-int board_late_init(void)
-{
-	const char *e;
-
-#ifdef CONFIG_FEC_MXC
-/*
- * FIXME: need to revisit this
- * The original code enabled PUE and 100-k pull-down without PKE, so the right
- * value here is likely:
- *	0 for no pull
- * or:
- *	PAD_CTL_PUS_100K_DOWN for 100-k pull-down
- */
-#define FEC_OUT_PAD_CTRL	0
-
-	static const iomux_v3_cfg_t fec_pads[] = {
-		MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
-		MX25_PAD_FEC_RX_DV__FEC_RX_DV,
-		MX25_PAD_FEC_RDATA0__FEC_RDATA0,
-		NEW_PAD_CTRL(MX25_PAD_FEC_TDATA0__FEC_TDATA0, FEC_OUT_PAD_CTRL),
-		NEW_PAD_CTRL(MX25_PAD_FEC_TX_EN__FEC_TX_EN, FEC_OUT_PAD_CTRL),
-		NEW_PAD_CTRL(MX25_PAD_FEC_MDC__FEC_MDC, FEC_OUT_PAD_CTRL),
-		MX25_PAD_FEC_MDIO__FEC_MDIO,
-		MX25_PAD_FEC_RDATA1__FEC_RDATA1,
-		NEW_PAD_CTRL(MX25_PAD_FEC_TDATA1__FEC_TDATA1, FEC_OUT_PAD_CTRL),
-
-		MX25_PAD_UPLL_BYPCLK__GPIO_3_16, /* LAN-RESET */
-		MX25_PAD_UART2_CTS__FEC_RX_ER, /* FEC_RX_ERR */
-	};
-
-	imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
-
-	/* assert PHY reset (low) */
-	gpio_direction_output(IMX_GPIO_NR(3, 16), 0);
-
-	udelay(5000);
-
-	/* deassert PHY reset */
-	gpio_set_value(IMX_GPIO_NR(3, 16), 1);
-
-	udelay(5000);
-#endif
-
-	e = env_get("gs_base_board");
-	if (e != NULL) {
-		if (strcmp(e, "G283") == 0) {
-			int key = gpio_get_value(IMX_GPIO_NR(2, 29));
-
-			if (key) {
-				/* Switch on both LEDs to inidcate boot mode */
-				gpio_set_value(IMX_GPIO_NR(1, 29), 0);
-				gpio_set_value(IMX_GPIO_NR(4, 21), 0);
-
-				env_set("preboot", "run gs_slow_boot");
-			} else
-				env_set("preboot", "run gs_fast_boot");
-		}
-	}
-
-	return 0;
-}
-
-int dram_init(void)
-{
-	/* dram_init must store complete ramsize in gd->ram_size */
-	gd->ram_size = get_ram_size((void *)PHYS_SDRAM,
-				PHYS_SDRAM_SIZE);
-	return 0;
-}
--- a/configs/MPC8349EMDS_PCI64_defconfig
+++ b/configs/MPC8349EMDS_PCI64_defconfig
@ -1,127 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xFE000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_SYS_MALLOC_LEN=0x40000
-CONFIG_SYS_CLK_FREQ=66000000
-CONFIG_MPC83xx=y
-CONFIG_HIGH_BATS=y
-CONFIG_TARGET_MPC8349EMDS=y
-CONFIG_DDR_MC_CLOCK_MODE_1_1=y
-CONFIG_SYSTEM_PLL_FACTOR_4_1=y
-CONFIG_CORE_PLL_RATIO_2_1=y
-CONFIG_PCI_HOST_MODE_ENABLE=y
-CONFIG_PCI_64BIT_MODE_ENABLE=y
-CONFIG_PCI_INT_ARBITER1_ENABLE=y
-CONFIG_BOOT_MEMORY_SPACE_LOW=y
-CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y
-CONFIG_TSEC1_MODE_GMII=y
-CONFIG_TSEC2_MODE_GMII=y
-CONFIG_BAT0=y
-CONFIG_BAT0_NAME="SDRAM"
-CONFIG_BAT0_BASE=0x00000000
-CONFIG_BAT0_LENGTH_256_MBYTES=y
-CONFIG_BAT0_ACCESS_RW=y
-CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_USER_MODE_VALID=y
-CONFIG_BAT0_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT5=y
-CONFIG_BAT5_NAME="IMMR"
-CONFIG_BAT5_BASE=0xE0000000
-CONFIG_BAT5_LENGTH_256_MBYTES=y
-CONFIG_BAT5_ACCESS_RW=y
-CONFIG_BAT5_ICACHE_INHIBITED=y
-CONFIG_BAT5_ICACHE_GUARDED=y
-CONFIG_BAT5_DCACHE_INHIBITED=y
-CONFIG_BAT5_DCACHE_GUARDED=y
-CONFIG_BAT5_USER_MODE_VALID=y
-CONFIG_BAT5_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT6=y
-CONFIG_BAT6_NAME="STACK_IN_DCACHE"
-CONFIG_BAT6_BASE=0xF0000000
-CONFIG_BAT6_LENGTH_256_MBYTES=y
-CONFIG_BAT6_ACCESS_RW=y
-CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT6_ICACHE_GUARDED=y
-CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT6_DCACHE_GUARDED=y
-CONFIG_BAT6_USER_MODE_VALID=y
-CONFIG_BAT6_SUPERVISOR_MODE_VALID=y
-CONFIG_LBLAW0=y
-CONFIG_LBLAW0_BASE=0xFE000000
-CONFIG_LBLAW0_NAME="FLASH"
-CONFIG_LBLAW0_LENGTH_32_MBYTES=y
-CONFIG_LBLAW1=y
-CONFIG_LBLAW1_BASE=0xE2400000
-CONFIG_LBLAW1_NAME="BCSR"
-CONFIG_LBLAW1_LENGTH_32_KBYTES=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_32_MBYTES=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="BCSR"
-CONFIG_BR1_OR1_BASE=0xE2400000
-CONFIG_OR1_XAM_SET=y
-CONFIG_OR1_SCY_15=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_HID0_FINAL_EMCP=y
-CONFIG_HID0_FINAL_ICE=y
-CONFIG_HID2_HBE=y
-CONFIG_ACR_PIPE_DEP_4=y
-CONFIG_ACR_RPTCNT_4=y
-CONFIG_SPCR_TSEC1EP_3=y
-CONFIG_SPCR_TSEC2EP_3=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_4=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=6
-CONFIG_USE_PREBOOT=y
-CONFIG_PREBOOT="echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_ENV_ADDR=0xFE080000
-CONFIG_ENV_ADDR_REDUND=0xFE0A0000
-CONFIG_DDR_ECC=y
-CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
-CONFIG_SYS_I2C_LEGACY=y
-CONFIG_SYS_I2C_FSL=y
-CONFIG_SYS_FSL_I2C_OFFSET=0x3000
-CONFIG_SYS_FSL_HAS_I2C2_OFFSET=y
-CONFIG_SYS_FSL_I2C2_OFFSET=0x3100
-CONFIG_SYS_I2C_SLAVE=0x7F
-CONFIG_SYS_I2C_SPEED=400000
-# CONFIG_MMC is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_OF_LIBFDT=y
--- a/configs/MPC8349EMDS_SDRAM_defconfig
+++ b/configs/MPC8349EMDS_SDRAM_defconfig
@ -1,138 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xFE000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_SYS_MALLOC_LEN=0x40000
-CONFIG_SYS_CLK_FREQ=66000000
-CONFIG_MPC83xx=y
-CONFIG_HIGH_BATS=y
-CONFIG_TARGET_MPC8349EMDS_SDRAM=y
-CONFIG_DDR_MC_CLOCK_MODE_1_1=y
-CONFIG_SYSTEM_PLL_FACTOR_4_1=y
-CONFIG_CORE_PLL_RATIO_2_1=y
-CONFIG_PCI_HOST_MODE_ENABLE=y
-CONFIG_PCI_INT_ARBITER1_ENABLE=y
-CONFIG_PCI_INT_ARBITER2_ENABLE=y
-CONFIG_BOOT_MEMORY_SPACE_LOW=y
-CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y
-CONFIG_TSEC1_MODE_GMII=y
-CONFIG_TSEC2_MODE_GMII=y
-CONFIG_BAT0=y
-CONFIG_BAT0_NAME="SDRAM"
-CONFIG_BAT0_BASE=0x00000000
-CONFIG_BAT0_LENGTH_256_MBYTES=y
-CONFIG_BAT0_ACCESS_RW=y
-CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_USER_MODE_VALID=y
-CONFIG_BAT0_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT5=y
-CONFIG_BAT5_NAME="IMMR"
-CONFIG_BAT5_BASE=0xE0000000
-CONFIG_BAT5_LENGTH_256_MBYTES=y
-CONFIG_BAT5_ACCESS_RW=y
-CONFIG_BAT5_ICACHE_INHIBITED=y
-CONFIG_BAT5_ICACHE_GUARDED=y
-CONFIG_BAT5_DCACHE_INHIBITED=y
-CONFIG_BAT5_DCACHE_GUARDED=y
-CONFIG_BAT5_USER_MODE_VALID=y
-CONFIG_BAT5_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT6=y
-CONFIG_BAT6_NAME="STACK_IN_DCACHE"
-CONFIG_BAT6_BASE=0xF0000000
-CONFIG_BAT6_LENGTH_256_MBYTES=y
-CONFIG_BAT6_ACCESS_RW=y
-CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT6_ICACHE_GUARDED=y
-CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT6_DCACHE_GUARDED=y
-CONFIG_BAT6_USER_MODE_VALID=y
-CONFIG_BAT6_SUPERVISOR_MODE_VALID=y
-CONFIG_LBLAW0=y
-CONFIG_LBLAW0_BASE=0xFE000000
-CONFIG_LBLAW0_NAME="FLASH"
-CONFIG_LBLAW0_LENGTH_32_MBYTES=y
-CONFIG_LBLAW1=y
-CONFIG_LBLAW1_BASE=0xE2400000
-CONFIG_LBLAW1_NAME="BCSR"
-CONFIG_LBLAW1_LENGTH_32_KBYTES=y
-CONFIG_LBLAW2=y
-CONFIG_LBLAW2_BASE=0xF0000000
-CONFIG_LBLAW2_NAME="SDRAM"
-CONFIG_LBLAW2_LENGTH_64_MBYTES=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_32_MBYTES=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="BCSR"
-CONFIG_BR1_OR1_BASE=0xE2400000
-CONFIG_OR1_XAM_SET=y
-CONFIG_OR1_SCY_15=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_ELBC_BR2_OR2=y
-CONFIG_BR2_OR2_NAME="SDRAM"
-CONFIG_BR2_OR2_BASE=0xF0000000
-CONFIG_BR2_PORTSIZE_32BIT=y
-CONFIG_BR2_MACHINE_SDRAM=y
-CONFIG_OR2_COLS_9=y
-CONFIG_OR2_ROWS_13=y
-CONFIG_OR2_EAD_EXTRA=y
-CONFIG_HID0_FINAL_EMCP=y
-CONFIG_HID0_FINAL_ICE=y
-CONFIG_HID2_HBE=y
-CONFIG_ACR_PIPE_DEP_4=y
-CONFIG_ACR_RPTCNT_4=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_4=y
-CONFIG_PCI_ONE_PCI1=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=6
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_ENV_ADDR=0xFE080000
-CONFIG_ENV_ADDR_REDUND=0xFE0A0000
-CONFIG_DDR_ECC=y
-CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
-CONFIG_SYS_I2C_LEGACY=y
-CONFIG_SYS_I2C_FSL=y
-CONFIG_SYS_FSL_I2C_OFFSET=0x3000
-CONFIG_SYS_FSL_HAS_I2C2_OFFSET=y
-CONFIG_SYS_FSL_I2C2_OFFSET=0x3100
-CONFIG_SYS_I2C_SLAVE=0x7F
-CONFIG_SYS_I2C_SPEED=400000
-# CONFIG_MMC is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_OF_LIBFDT=y
--- a/configs/MPC8349EMDS_SLAVE_defconfig
+++ b/configs/MPC8349EMDS_SLAVE_defconfig
@ -1,127 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xFE000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_SYS_MALLOC_LEN=0x40000
-CONFIG_SYS_CLK_FREQ=66666666
-CONFIG_MPC83xx=y
-CONFIG_HIGH_BATS=y
-CONFIG_TARGET_MPC8349EMDS=y
-CONFIG_DDR_MC_CLOCK_MODE_1_1=y
-CONFIG_SYSTEM_PLL_FACTOR_4_1=y
-CONFIG_CORE_PLL_RATIO_2_1=y
-CONFIG_PCI_64BIT_MODE_ENABLE=y
-CONFIG_BOOT_MEMORY_SPACE_LOW=y
-CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y
-CONFIG_TSEC1_MODE_GMII=y
-CONFIG_TSEC2_MODE_GMII=y
-CONFIG_BAT0=y
-CONFIG_BAT0_NAME="SDRAM"
-CONFIG_BAT0_BASE=0x00000000
-CONFIG_BAT0_LENGTH_256_MBYTES=y
-CONFIG_BAT0_ACCESS_RW=y
-CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_USER_MODE_VALID=y
-CONFIG_BAT0_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT5=y
-CONFIG_BAT5_NAME="IMMR"
-CONFIG_BAT5_BASE=0xE0000000
-CONFIG_BAT5_LENGTH_256_MBYTES=y
-CONFIG_BAT5_ACCESS_RW=y
-CONFIG_BAT5_ICACHE_INHIBITED=y
-CONFIG_BAT5_ICACHE_GUARDED=y
-CONFIG_BAT5_DCACHE_INHIBITED=y
-CONFIG_BAT5_DCACHE_GUARDED=y
-CONFIG_BAT5_USER_MODE_VALID=y
-CONFIG_BAT5_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT6=y
-CONFIG_BAT6_NAME="STACK_IN_DCACHE"
-CONFIG_BAT6_BASE=0xF0000000
-CONFIG_BAT6_LENGTH_256_MBYTES=y
-CONFIG_BAT6_ACCESS_RW=y
-CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT6_ICACHE_GUARDED=y
-CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT6_DCACHE_GUARDED=y
-CONFIG_BAT6_USER_MODE_VALID=y
-CONFIG_BAT6_SUPERVISOR_MODE_VALID=y
-CONFIG_LBLAW0=y
-CONFIG_LBLAW0_BASE=0xFE000000
-CONFIG_LBLAW0_NAME="FLASH"
-CONFIG_LBLAW0_LENGTH_32_MBYTES=y
-CONFIG_LBLAW1=y
-CONFIG_LBLAW1_BASE=0xE2400000
-CONFIG_LBLAW1_NAME="BCSR"
-CONFIG_LBLAW1_LENGTH_32_KBYTES=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_32_MBYTES=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="BCSR"
-CONFIG_BR1_OR1_BASE=0xE2400000
-CONFIG_OR1_XAM_SET=y
-CONFIG_OR1_SCY_15=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_HID0_FINAL_EMCP=y
-CONFIG_HID0_FINAL_ICE=y
-CONFIG_HID2_HBE=y
-CONFIG_ACR_PIPE_DEP_4=y
-CONFIG_ACR_RPTCNT_4=y
-CONFIG_SPCR_TSEC1EP_3=y
-CONFIG_SPCR_TSEC2EP_3=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_4=y
-CONFIG_PCI_ONE_PCI1=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="PCISLAVE"
-CONFIG_BOOTDELAY=6
-CONFIG_USE_PREBOOT=y
-CONFIG_PREBOOT="echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_ENV_ADDR=0xFE080000
-CONFIG_ENV_ADDR_REDUND=0xFE0A0000
-CONFIG_DDR_ECC=y
-CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
-CONFIG_SYS_I2C_LEGACY=y
-CONFIG_SYS_I2C_FSL=y
-CONFIG_SYS_FSL_I2C_OFFSET=0x3000
-CONFIG_SYS_FSL_HAS_I2C2_OFFSET=y
-CONFIG_SYS_FSL_I2C2_OFFSET=0x3100
-CONFIG_SYS_I2C_SLAVE=0x7F
-CONFIG_SYS_I2C_SPEED=400000
-# CONFIG_MMC is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_OF_LIBFDT=y
--- a/configs/MPC8349EMDS_defconfig
+++ b/configs/MPC8349EMDS_defconfig
@ -1,130 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xFE000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_SYS_MALLOC_LEN=0x40000
-CONFIG_SYS_CLK_FREQ=66000000
-CONFIG_MPC83xx=y
-CONFIG_HIGH_BATS=y
-CONFIG_TARGET_MPC8349EMDS=y
-CONFIG_DDR_MC_CLOCK_MODE_1_1=y
-CONFIG_SYSTEM_PLL_FACTOR_4_1=y
-CONFIG_CORE_PLL_RATIO_2_1=y
-CONFIG_PCI_HOST_MODE_ENABLE=y
-CONFIG_PCI_INT_ARBITER1_ENABLE=y
-CONFIG_PCI_INT_ARBITER2_ENABLE=y
-CONFIG_BOOT_MEMORY_SPACE_LOW=y
-CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y
-CONFIG_TSEC1_MODE_GMII=y
-CONFIG_TSEC2_MODE_GMII=y
-CONFIG_BAT0=y
-CONFIG_BAT0_NAME="SDRAM"
-CONFIG_BAT0_BASE=0x00000000
-CONFIG_BAT0_LENGTH_256_MBYTES=y
-CONFIG_BAT0_ACCESS_RW=y
-CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_USER_MODE_VALID=y
-CONFIG_BAT0_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT5=y
-CONFIG_BAT5_NAME="IMMR"
-CONFIG_BAT5_BASE=0xE0000000
-CONFIG_BAT5_LENGTH_256_MBYTES=y
-CONFIG_BAT5_ACCESS_RW=y
-CONFIG_BAT5_ICACHE_INHIBITED=y
-CONFIG_BAT5_ICACHE_GUARDED=y
-CONFIG_BAT5_DCACHE_INHIBITED=y
-CONFIG_BAT5_DCACHE_GUARDED=y
-CONFIG_BAT5_USER_MODE_VALID=y
-CONFIG_BAT5_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT6=y
-CONFIG_BAT6_NAME="STACK_IN_DCACHE"
-CONFIG_BAT6_BASE=0xF0000000
-CONFIG_BAT6_LENGTH_256_MBYTES=y
-CONFIG_BAT6_ACCESS_RW=y
-CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT6_ICACHE_GUARDED=y
-CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT6_DCACHE_GUARDED=y
-CONFIG_BAT6_USER_MODE_VALID=y
-CONFIG_BAT6_SUPERVISOR_MODE_VALID=y
-CONFIG_LBLAW0=y
-CONFIG_LBLAW0_BASE=0xFE000000
-CONFIG_LBLAW0_NAME="FLASH"
-CONFIG_LBLAW0_LENGTH_32_MBYTES=y
-CONFIG_LBLAW1=y
-CONFIG_LBLAW1_BASE=0xE2400000
-CONFIG_LBLAW1_NAME="BCSR"
-CONFIG_LBLAW1_LENGTH_32_KBYTES=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_32_MBYTES=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="BCSR"
-CONFIG_BR1_OR1_BASE=0xE2400000
-CONFIG_OR1_XAM_SET=y
-CONFIG_OR1_SCY_15=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_HID0_FINAL_EMCP=y
-CONFIG_HID0_FINAL_ICE=y
-CONFIG_HID2_HBE=y
-CONFIG_ACR_PIPE_DEP_4=y
-CONFIG_ACR_RPTCNT_4=y
-CONFIG_SPCR_TSEC1EP_3=y
-CONFIG_SPCR_TSEC2EP_3=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_4=y
-CONFIG_PCI_ONE_PCI1=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=6
-CONFIG_USE_PREBOOT=y
-CONFIG_PREBOOT="echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_ENV_ADDR=0xFE080000
-CONFIG_ENV_ADDR_REDUND=0xFE0A0000
-CONFIG_DDR_ECC=y
-CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
-CONFIG_SYS_I2C_LEGACY=y
-CONFIG_SYS_I2C_FSL=y
-CONFIG_SYS_FSL_I2C_OFFSET=0x3000
-CONFIG_SYS_FSL_HAS_I2C2_OFFSET=y
-CONFIG_SYS_FSL_I2C2_OFFSET=0x3100
-CONFIG_SYS_I2C_SLAVE=0x7F
-CONFIG_SYS_I2C_SPEED=400000
-# CONFIG_MMC is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_OF_LIBFDT=y
--- a/configs/aspenite_defconfig
+++ b/configs/aspenite_defconfig
@ -1,19 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SKIP_LOWLEVEL_INIT=y
-CONFIG_ARCH_CPU_INIT=y
-CONFIG_TARGET_ASPENITE=y
-CONFIG_SYS_TEXT_BASE=0x600000
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_ENV_SIZE=0x20000
-CONFIG_IDENT_STRING="\nMarvell-Aspenite DB"
-CONFIG_SYS_LOAD_ADDR=0x800000
-CONFIG_BOOTDELAY=3
-CONFIG_USE_PREBOOT=y
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_BOARD_EARLY_INIT_F=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-# CONFIG_NET is not set
-# CONFIG_MMC is not set
-CONFIG_SYS_NS16550=y
-CONFIG_OF_LIBFDT=y
--- a/configs/bg0900_defconfig
+++ b/configs/bg0900_defconfig
@ -1,43 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX28=y
-CONFIG_SYS_TEXT_BASE=0x40002000
-CONFIG_SPL_GPIO=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SIZE=0x4000
-CONFIG_IMX_CONFIG=""
-CONFIG_SPL_TEXT_BASE=0x00001000
-CONFIG_TARGET_BG0900=y
-CONFIG_SPL_SERIAL=y
-CONFIG_SPL=y
-CONFIG_SYS_LOAD_ADDR=0x42000000
-CONFIG_BOOTDELAY=3
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyAMA0,115200"
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_ARCH_MISC_INIT=y
-CONFIG_BOARD_EARLY_INIT_F=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_NAND_TRIMFFS=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_DOS_PARTITION=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_VERSION_VARIABLE=y
-CONFIG_MXS_GPIO=y
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_NAND_MXS=y
-CONFIG_MII=y
-CONFIG_CONS_INDEX=0
-CONFIG_SPI=y
-CONFIG_OF_LIBFDT=y
--- a/configs/flea3_defconfig
+++ b/configs/flea3_defconfig
@ -1,58 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SYS_DCACHE_OFF=y
-CONFIG_TARGET_FLEA3=y
-CONFIG_SYS_TEXT_BASE=0xA0000000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SIZE=0x10000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_SYS_I2C_MXC_I2C1=y
-CONFIG_SYS_I2C_MXC_I2C2=y
-CONFIG_SYS_I2C_MXC_I2C3=y
-CONFIG_SYS_MALLOC_LEN=0x110000
-CONFIG_SYS_LOAD_ADDR=0x80800000
-CONFIG_FIT=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_BOOTDELAY=3
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="flea3 U-Boot > "
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_SPI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=mxc_nand,nor0=physmap-flash.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=mxc_nand:50m(root1),32m(rootfb),64m(pcache),64m(app1),10m(app2),-(spool);physmap-flash.0:512k(u-boot),64k(env1),64k(env2),3776k(kernel1),3776k(kernel2)"
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_ENV_ADDR=0xA0080000
-CONFIG_ENV_ADDR_REDUND=0xA0090000
-CONFIG_MXC_GPIO=y
-CONFIG_SYS_I2C_LEGACY=y
-CONFIG_SYS_I2C_MXC=y
-CONFIG_SYS_MXC_I2C3_SLAVE=0xfe
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_NAND_MXC=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_MICREL=y
-CONFIG_PHY_MICREL_KSZ8XXX=y
-CONFIG_MII=y
-CONFIG_MXC_UART=y
-CONFIG_SPI=y
-CONFIG_MXC_SPI=y
-CONFIG_OF_LIBFDT=y
-CONFIG_FDT_FIXUP_PARTITIONS=y
--- a/configs/zmx25_defconfig
+++ b/configs/zmx25_defconfig
@ -1,38 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX25=y
-CONFIG_SYS_TEXT_BASE=0xA0000000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SIZE=0x20000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_TARGET_ZMX25=y
-CONFIG_IMX_CONFIG=""
-CONFIG_SYS_MALLOC_LEN=0x3f8000
-CONFIG_SYS_LOAD_ADDR=0x80000000
-CONFIG_BOOTDELAY=5
-CONFIG_AUTOBOOT_KEYED=y
-CONFIG_AUTOBOOT_PROMPT="boot in %d s\n"
-CONFIG_AUTOBOOT_DELAY_STR="delaygs"
-CONFIG_AUTOBOOT_STOP_STR="stopgs"
-CONFIG_USE_PREBOOT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_HUSH_PARSER=y
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PROMPT="zmx25> "
-CONFIG_CMD_IMLS=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_FAT=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xA0040000
-# CONFIG_MMC is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MII=y
-CONFIG_MXC_UART=y
-CONFIG_USB=y
-CONFIG_LZO=y
--- a/doc/imx/common/imx25.txt
+++ b/doc/imx/common/imx25.txt
@ -1,10 +0,0 @@
-U-Boot for Freescale i.MX25
-
-This file contains information for the port of U-Boot to the Freescale i.MX25
-SoC.
-
-1. CONVENTIONS FOR FUSE ASSIGNMENTS
-----------------------------------
-
-1.1 MAC Address: It is stored in the words 26 to 31 of fuse bank 0, using the
-    natural MAC byte order (i.e. MSB first).
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@ -23,7 +23,6 @@ obj-$(CONFIG_IPROC_GPIO)	+= iproc_gpio.o
 obj-$(CONFIG_KIRKWOOD_GPIO)	+= kw_gpio.o
 obj-$(CONFIG_KONA_GPIO)	+= kona_gpio.o
 obj-$(CONFIG_MARVELL_GPIO)	+= mvgpio.o
-obj-$(CONFIG_MARVELL_MFP)	+= mvmfp.o
 obj-$(CONFIG_MCP230XX_GPIO)	+= mcp230xx_gpio.o
 obj-$(CONFIG_MXC_GPIO)	+= mxc_gpio.o
 obj-$(CONFIG_MXS_GPIO)	+= mxs_gpio.o
--- a/drivers/gpio/mvmfp.c
+++ b/drivers/gpio/mvmfp.c
@ -1,55 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2010
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>,
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <mvmfp.h>
-#include <asm/arch/mfp.h>
-
-/*
- * mfp_config
- *
- * On most of Marvell SoCs (ex. ARMADA100) there is Multi-Funtion-Pin
- * configuration registers to configure each GPIO/Function pin on the
- * SoC.
- *
- * This function reads the array of values for
- * MFPR_X registers and programms them into respective
- * Multi-Function Pin registers.
- * It supports - Alternate Function Selection programming.
- *
- * Whereas,
- * The Configureation value is constructed using MFP()
- * array consists of 32bit values as defined in MFP(xx,xx..) macro
- */
-void mfp_config(u32 *mfp_cfgs)
-{
-	u32 *p_mfpr = NULL;
-	u32 cfg_val, val;
-
-	do {
-		cfg_val = *mfp_cfgs++;
-		/* exit if End of configuration table detected */
-		if (cfg_val == MFP_EOC)
-			break;
-
-		p_mfpr = (u32 *)(MV_MFPR_BASE
-				+ MFP_REG_GET_OFFSET(cfg_val));
-
-		/* Write a mfg register as per configuration */
-		val = 0;
-		if (cfg_val & MFP_VALUE_MASK)
-			val |= cfg_val & MFP_VALUE_MASK;
-
-		writel(val, p_mfpr);
-	} while (1);
-	/*
-	 * perform a read-back of any MFPR register to make sure the
-	 * previous writings are finished
-	 */
-	readl(p_mfpr);
-}
--- a/drivers/gpio/mxc_gpio.c
+++ b/drivers/gpio/mxc_gpio.c
@ -44,7 +44,7 @@ static unsigned long gpio_ports[] = {
 	[0] = GPIO1_BASE_ADDR,
 	[1] = GPIO2_BASE_ADDR,
 	[2] = GPIO3_BASE_ADDR,
-#if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \
+#if defined(CONFIG_MX27) || defined(CONFIG_MX51) || \
 		defined(CONFIG_MX53) || defined(CONFIG_MX6) || \
 		defined(CONFIG_MX7) || defined(CONFIG_IMX8M) || \
 		defined(CONFIG_ARCH_IMX8) || defined(CONFIG_IMXRT1050)
@ -352,7 +352,7 @@ static const struct mxc_gpio_plat mxc_plat[] = {
 	{ 0, (struct gpio_regs *)GPIO1_BASE_ADDR },
 	{ 1, (struct gpio_regs *)GPIO2_BASE_ADDR },
 	{ 2, (struct gpio_regs *)GPIO3_BASE_ADDR },
-#if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \
+#if defined(CONFIG_MX27) || defined(CONFIG_MX51) || \
 		defined(CONFIG_MX53) || defined(CONFIG_MX6) || \
 		defined(CONFIG_IMX8M) || defined(CONFIG_ARCH_IMX8)
 	{ 3, (struct gpio_regs *)GPIO4_BASE_ADDR },
@ -376,7 +376,7 @@ U_BOOT_DRVINFOS(mxc_gpios) = {
 	{ "gpio_mxc", &mxc_plat[0] },
 	{ "gpio_mxc", &mxc_plat[1] },
 	{ "gpio_mxc", &mxc_plat[2] },
-#if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \
+#if defined(CONFIG_MX27) || defined(CONFIG_MX51) || \
 		defined(CONFIG_MX53) || defined(CONFIG_MX6) || \
 		defined(CONFIG_IMX8M) || defined(CONFIG_ARCH_IMX8)
 	{ "gpio_mxc", &mxc_plat[3] },
--- a/drivers/mmc/mv_sdhci.c
+++ b/drivers/mmc/mv_sdhci.c
@ -44,29 +44,6 @@ static void sdhci_mvebu_mbus_config(void __iomem *base)

 #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
 static struct sdhci_ops mv_ops;
-
-#if defined(CONFIG_SHEEVA_88SV331xV5)
-#define SD_CE_ATA_2	0xEA
-#define  MMC_CARD	0x1000
-#define  MMC_WIDTH	0x0100
-static inline void mv_sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
-{
-	struct mmc *mmc = host->mmc;
-	u32 ata = (unsigned long)host->ioaddr + SD_CE_ATA_2;
-
-	if (!IS_SD(mmc) && reg == SDHCI_HOST_CONTROL) {
-		if (mmc->bus_width == 8)
-			writew(readw(ata) | (MMC_CARD | MMC_WIDTH), ata);
-		else
-			writew(readw(ata) & ~(MMC_CARD | MMC_WIDTH), ata);
-	}
-
-	writeb(val, host->ioaddr + reg);
-}
-
-#else
-#define mv_sdhci_writeb	NULL
-#endif /* CONFIG_SHEEVA_88SV331xV5 */
 #endif /* CONFIG_MMC_SDHCI_IO_ACCESSORS */

 int mv_sdh_init(unsigned long regbase, u32 max_clk, u32 min_clk, u32 quirks)
@ -84,7 +61,6 @@ int mv_sdh_init(unsigned long regbase, u32 max_clk, u32 min_clk, u32 quirks)
 	host->max_clk = max_clk;
 #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
 	memset(&mv_ops, 0, sizeof(struct sdhci_ops));
-	mv_ops.write_b = mv_sdhci_writeb;
 	host->ops = &mv_ops;
 #endif

--- a/drivers/mtd/nand/raw/mxc_nand.c
+++ b/drivers/mtd/nand/raw/mxc_nand.c
@ -11,7 +11,7 @@
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <asm/io.h>
-#if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX35) || \
+#if defined(CONFIG_MX27) || \
 	defined(CONFIG_MX51) || defined(CONFIG_MX53)
 #include <asm/arch/imx-regs.h>
 #endif
--- a/drivers/mtd/nand/raw/mxc_nand.h
+++ b/drivers/mtd/nand/raw/mxc_nand.h
@ -29,11 +29,6 @@
 #define is_mxc_nfc_1()		1
 #define is_mxc_nfc_21()		0
 #define is_mxc_nfc_32()		0
-#elif defined(CONFIG_MX25) || defined(CONFIG_MX35)
-#define MXC_NFC_V2_1
-#define is_mxc_nfc_1()		0
-#define is_mxc_nfc_21()		1
-#define is_mxc_nfc_32()		0
 #elif defined(CONFIG_MX51) || defined(CONFIG_MX53)
 #define MXC_NFC_V3
 #define MXC_NFC_V3_2
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@ -521,7 +521,7 @@ static int fec_open(struct eth_device *edev)
 	       &fec->eth->ecntrl);
 #endif

-#if defined(CONFIG_MX25) || defined(CONFIG_MX53) || defined(CONFIG_MX6SL)
+#if defined(CONFIG_MX53) || defined(CONFIG_MX6SL)
 	udelay(100);

 	/* setup the MII gasket for RMII mode */
--- a/drivers/net/fec_mxc.h
+++ b/drivers/net/fec_mxc.h
@ -128,7 +128,7 @@ struct ethernet_regs {

 	uint32_t res14[7];		/* MBAR_ETH + 0x2E4-2FC */

-#if defined(CONFIG_MX25) || defined(CONFIG_MX53) || defined(CONFIG_MX6SL)
+#if defined(CONFIG_MX53) || defined(CONFIG_MX6SL)
 	uint16_t miigsk_cfgr;		/* MBAR_ETH + 0x300 */
 	uint16_t res15[3];		/* MBAR_ETH + 0x302-306 */
 	uint16_t miigsk_enr;		/* MBAR_ETH + 0x308 */
@ -196,7 +196,7 @@ struct ethernet_regs {
 #define FEC_X_DES_ACTIVE_TDAR		0x01000000
 #define FEC_R_DES_ACTIVE_RDAR		0x01000000

-#if defined(CONFIG_MX25) || defined(CONFIG_MX53) || defined(CONFIG_MX6SL)
+#if defined(CONFIG_MX53) || defined(CONFIG_MX6SL)
 /* defines for MIIGSK */
 /* RMII frequency control: 0=50MHz, 1=5MHz */
 #define MIIGSK_CFGR_FRCONT		(1 << 6)
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@ -645,8 +645,7 @@ config MCFUART

 config MXC_UART
 	bool "IMX serial port support"
-	depends on ARCH_MX25 || ARCH_MX31 || TARGET_FLEA3 \
-		|| MX5 || MX6 || MX7 || IMX8M
+	depends on ARCH_MX31 || MX5 || MX6 || MX7 || IMX8M
 	help
 	  If you have a machine based on a Motorola IMX CPU you
 	  can enable its onboard serial port by enabling this option.
--- a/drivers/serial/serial-uclass.c
+++ b/drivers/serial/serial-uclass.c
@ -27,10 +27,6 @@ DECLARE_GLOBAL_DATA_PTR;
 */
 static const unsigned long baudrate_table[] = CONFIG_SYS_BAUDRATE_TABLE;

-#if !CONFIG_VAL(SYS_MALLOC_F_LEN)
-#error "Serial is required before relocation - define CONFIG_$(SPL_)SYS_MALLOC_F_LEN to make this work"
-#endif
-
 #if CONFIG_IS_ENABLED(SERIAL_PRESENT)
 static int serial_check_stdout(const void *blob, struct udevice **devp)
 {
--- a/drivers/spi/mxc_spi.c
+++ b/drivers/spi/mxc_spi.c
@ -23,7 +23,7 @@
 DECLARE_GLOBAL_DATA_PTR;

 /* MX35 and older is CSPI */
-#if defined(CONFIG_MX25) || defined(CONFIG_MX31) || defined(CONFIG_MX35)
+#if defined(CONFIG_MX31)
 #define MXC_CSPI
 struct cspi_regs {
 	u32 rxdata;
@ -48,17 +48,10 @@ struct cspi_regs {
 #define MXC_CSPICTRL_RXOVF		BIT(6)
 #define MXC_CSPIPERIOD_32KHZ		BIT(15)
 #define MAX_SPI_BYTES			4
-#if defined(CONFIG_MX25) || defined(CONFIG_MX35)
-#define MXC_CSPICTRL_CHIPSELECT(x)	(((x) & 0x3) << 12)
-#define MXC_CSPICTRL_BITCOUNT(x)	(((x) & 0xfff) << 20)
-#define MXC_CSPICTRL_TC			BIT(7)
-#define MXC_CSPICTRL_MAXBITS		0xfff
-#else	/* MX31 */
 #define MXC_CSPICTRL_CHIPSELECT(x)	(((x) & 0x3) << 24)
 #define MXC_CSPICTRL_BITCOUNT(x)	(((x) & 0x1f) << 8)
 #define MXC_CSPICTRL_TC			BIT(8)
 #define MXC_CSPICTRL_MAXBITS		0x1f
-#endif

 #else	/* MX51 and newer is ECSPI */
 #define MXC_ECSPI
@ -211,9 +204,6 @@ static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs)
 		MXC_CSPICTRL_BITCOUNT(MXC_CSPICTRL_MAXBITS) |
 		MXC_CSPICTRL_DATARATE(div) |
 		MXC_CSPICTRL_EN |
-#ifdef CONFIG_MX35
-		MXC_CSPICTRL_SSCTL |
-#endif
 		MXC_CSPICTRL_MODE;

 	if (mode & SPI_CPHA)
--- a/drivers/usb/host/ehci-mxc.c
+++ b/drivers/usb/host/ehci-mxc.c
@ -67,56 +67,7 @@ static int mxc_set_usbcontrol(int port, unsigned int flags)
 	unsigned int v;

 	v = readl(IMX_USB_BASE + USBCTRL_OTGBASE_OFFSET);
-#if defined(CONFIG_MX25)
-	switch (port) {
-	case 0:	/* OTG port */
-		v &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PM_BIT | MX25_OTG_PP_BIT |
-				MX25_OTG_OCPOL_BIT);
-		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT;
-
-		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-			v |= MX25_OTG_PM_BIT;
-
-		if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
-			v |= MX25_OTG_PP_BIT;
-
-		if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
-			v |= MX25_OTG_OCPOL_BIT;
-
-		break;
-	case 1: /* H1 port */
-		v &= ~(MX25_H1_SIC_MASK | MX25_H1_PM_BIT | MX25_H1_PP_BIT |
-				MX25_H1_OCPOL_BIT | MX25_H1_TLL_BIT |
-				MX25_H1_USBTE_BIT | MX25_H1_IPPUE_DOWN_BIT |
-				MX25_H1_IPPUE_UP_BIT);
-		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT;
-
-		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-			v |= MX25_H1_PM_BIT;
-
-		if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
-			v |= MX25_H1_PP_BIT;
-
-		if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
-			v |= MX25_H1_OCPOL_BIT;
-
-		if (!(flags & MXC_EHCI_TTL_ENABLED))
-			v |= MX25_H1_TLL_BIT;
-
-		if (flags & MXC_EHCI_INTERNAL_PHY)
-			v |= MX25_H1_USBTE_BIT;
-
-		if (flags & MXC_EHCI_IPPUE_DOWN)
-			v |= MX25_H1_IPPUE_DOWN_BIT;
-
-		if (flags & MXC_EHCI_IPPUE_UP)
-			v |= MX25_H1_IPPUE_UP_BIT;
-
-		break;
-	default:
-		return -EINVAL;
-	}
-#elif defined(CONFIG_MX31)
+#if defined(CONFIG_MX31)
 	switch (port) {
 	case 0:	/* OTG port */
 		v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
@ -147,55 +98,6 @@ static int mxc_set_usbcontrol(int port, unsigned int flags)
 		if (!(flags & MXC_EHCI_TTL_ENABLED))
 			v |= MX31_H2_DT_BIT;

-		break;
-	default:
-		return -EINVAL;
-	}
-#elif defined(CONFIG_MX35)
-	switch (port) {
-	case 0:	/* OTG port */
-		v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT | MX35_OTG_PP_BIT |
-				MX35_OTG_OCPOL_BIT);
-		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_OTG_SIC_SHIFT;
-
-		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-			v |= MX35_OTG_PM_BIT;
-
-		if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
-			v |= MX35_OTG_PP_BIT;
-
-		if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
-			v |= MX35_OTG_OCPOL_BIT;
-
-		break;
-	case 1: /* H1 port */
-		v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_PP_BIT |
-				MX35_H1_OCPOL_BIT | MX35_H1_TLL_BIT |
-				MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT |
-				MX35_H1_IPPUE_UP_BIT);
-		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_H1_SIC_SHIFT;
-
-		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-			v |= MX35_H1_PM_BIT;
-
-		if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
-			v |= MX35_H1_PP_BIT;
-
-		if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
-			v |= MX35_H1_OCPOL_BIT;
-
-		if (!(flags & MXC_EHCI_TTL_ENABLED))
-			v |= MX35_H1_TLL_BIT;
-
-		if (flags & MXC_EHCI_INTERNAL_PHY)
-			v |= MX35_H1_USBTE_BIT;
-
-		if (flags & MXC_EHCI_IPPUE_DOWN)
-			v |= MX35_H1_IPPUE_DOWN_BIT;
-
-		if (flags & MXC_EHCI_IPPUE_UP)
-			v |= MX35_H1_IPPUE_UP_BIT;
-
 		break;
 	default:
 		return -EINVAL;
@ -230,10 +132,6 @@ int ehci_hcd_init(int index, enum usb_init_type init,
 	setbits_le32(&ehci->usbmode, CM_HOST);
 	__raw_writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc);
 	mxc_set_usbcontrol(CONFIG_MXC_USB_PORT, CONFIG_MXC_USB_FLAGS);
-#ifdef CONFIG_MX35
-	/* Workaround for ENGcm11601 */
-	__raw_writel(0, &ehci->sbuscfg);
-#endif

 	udelay(10000);

--- a/drivers/w1/Kconfig
+++ b/drivers/w1/Kconfig
@ -20,7 +20,7 @@ config W1_GPIO

 config W1_MXC
 	bool "Enable 1-wire controller on i.MX processors"
-	depends on ARCH_MX25 || ARCH_MX31 || ARCH_MX5
+	depends on ARCH_MX31 || ARCH_MX5
 	help
 	  Support the one wire controller found in some members of the NXP
 	  i.MX SoC family.
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@ -24,7 +24,7 @@ config WATCHDOG_AUTOSTART

 config WATCHDOG_TIMEOUT_MSECS
 	int "Watchdog timeout in msec"
-	default 128000 if ARCH_MX25 || ARCH_MX31 || ARCH_MX5 || ARCH_MX6
+	default 128000 if ARCH_MX31 || ARCH_MX5 || ARCH_MX6
 	default 128000 if ARCH_MX7 || ARCH_VF610
 	default 30000 if ARCH_SOCFPGA
 	default 60000
--- a/Show more
+++ b/Show more