arm: kirkwood: suen3: fixed build warning

This patch fixes following build warning

Invalid Kwbimage command Type - valid names are: BOOT_FROM, NAND_ECC_MODE, NAND_PAGE_SIZE, SATA_PIO_MODE, DDR_INIT_DELAY, DATA, , spi, nand, sata, pex, uart

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
This commit is contained in:
Prafulla Wadaskar 2010-03-03 15:27:37 +05:30 committed by Tom Rix
parent e4d3449201
commit 637833c2d6

View file

@ -64,7 +64,6 @@ DATA 0xFFD01400 0x43000400 # SDRAM Configuration Register
# bit31-30: 01
DATA 0xFFD01404 0x36343000 # DDR Controller Control Low
0x38543000
# bit 3-0: 0 reserved
# bit 4: 0=addr/cmd in smame cycle
# bit 5: 0=clk is driven during self refresh, we don't care for APX
@ -170,7 +169,7 @@ DATA 0xFFD0149C 0x0000E90F # CPU ODT Control
# bit11-10:2, DQ_ODTSel. ODT select turned on, 75 ohm
DATA 0xFFD01480 0x00000001 # DDR Initialization Control
#bit0=1, enable DDR init upon this register write
# bit0=1, enable DDR init upon this register write
# End of Header extension
DATA 0x0 0x0