AT91: Update otc570 board to new SoC access

* convert otc570 board to use c stucture SoC access
* change gpio access to at91_gpio syntax

Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
This commit is contained in:
Daniel Gorsulowski 2010-02-11 14:57:04 +01:00 committed by Tom Rix
parent 7cedb29872
commit 6258b04e9a
2 changed files with 105 additions and 96 deletions

View file

@ -28,13 +28,13 @@
#include <common.h>
#include <asm/arch/at91sam9263.h>
#include <asm/arch/at91sam9_matrix.h>
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_rstc.h>
#include <asm/arch/at91_matrix.h>
#include <asm/arch/at91_pio.h>
#include <asm/arch/clk.h>
#include <asm/arch/gpio.h>
#include <asm/arch/hardware.h>
#include <asm/arch/io.h>
#include <atmel_lcdc.h>
@ -58,10 +58,10 @@ int get_hw_rev(void)
if (hw_rev >= 0)
return hw_rev;
hw_rev = at91_get_gpio_value(AT91_PIN_PB19);
hw_rev |= at91_get_gpio_value(AT91_PIN_PB20) << 1;
hw_rev |= at91_get_gpio_value(AT91_PIN_PB21) << 2;
hw_rev |= at91_get_gpio_value(AT91_PIN_PB22) << 3;
hw_rev = at91_get_pio_value(AT91_PIO_PORTB, 19);
hw_rev |= at91_get_pio_value(AT91_PIO_PORTB, 20) << 1;
hw_rev |= at91_get_pio_value(AT91_PIO_PORTB, 21) << 2;
hw_rev |= at91_get_pio_value(AT91_PIO_PORTB, 22) << 3;
if (hw_rev == 15)
hw_rev = 0;
@ -73,40 +73,44 @@ int get_hw_rev(void)
static void otc570_nand_hw_init(void)
{
unsigned long csa;
at91_smc_t *smc = (at91_smc_t *) AT91_SMC0_BASE;
at91_matrix_t *matrix = (at91_matrix_t *) AT91_MATRIX_BASE;
/* Enable CS3 */
csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
at91_sys_write(AT91_MATRIX_EBI0CSA,
csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
csa = readl(&matrix->csa[0]) | AT91_MATRIX_CSA_EBI_CS3A;
writel(csa, &matrix->csa[0]);
/* Configure SMC CS3 for NAND/SmartMedia */
at91_sys_write(AT91_SMC_SETUP(3),
AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
at91_sys_write(AT91_SMC_PULSE(3),
AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
at91_sys_write(AT91_SMC_CYCLE(3),
AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
at91_sys_write(AT91_SMC_MODE(3),
AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
AT91_SMC_EXNWMODE_DISABLE |
AT91_SMC_DBW_8 |
AT91_SMC_TDF_(2));
writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
&smc->cs[3].setup);
writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) |
AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3),
&smc->cs[3].pulse);
writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
&smc->cs[3].cycle);
writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
AT91_SMC_MODE_EXNW_DISABLE |
AT91_SMC_MODE_DBW_8 |
AT91_SMC_MODE_TDF_CYCLE(2),
&smc->cs[3].mode);
/* Configure RDY/BSY */
at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
/* Enable NandFlash */
at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
}
#endif /* CONFIG_CMD_NAND */
#ifdef CONFIG_MACB
static void otc570_macb_hw_init(void)
{
at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
/* Enable clock */
at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_EMAC);
writel(1 << AT91SAM9263_ID_EMAC, &pmc->pcer);
at91_macb_hw_init();
}
#endif
@ -119,26 +123,27 @@ static void otc570_macb_hw_init(void)
*/
static void otc570_ethercat_hw_init(void)
{
at91_smc_t *smc1 = (at91_smc_t *) AT91_SMC1_BASE;
/* Configure SMC EBI1_CS0 for EtherCAT */
at91_sys_write(AT91_SMC1_SETUP(0),
AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) |
AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
at91_sys_write(AT91_SMC1_PULSE(0),
AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(9) |
AT91_SMC_NRDPULSE_(5) | AT91_SMC_NCS_RDPULSE_(9));
at91_sys_write(AT91_SMC1_CYCLE(0),
AT91_SMC_NWECYCLE_(10) | AT91_SMC_NRDCYCLE_(6));
writel(AT91_SMC_SETUP_NWE(0) | AT91_SMC_SETUP_NCS_WR(0) |
AT91_SMC_SETUP_NRD(0) | AT91_SMC_SETUP_NCS_RD(0),
&smc1->cs[0].setup);
writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(9) |
AT91_SMC_PULSE_NRD(5) | AT91_SMC_PULSE_NCS_RD(9),
&smc1->cs[0].pulse);
writel(AT91_SMC_CYCLE_NWE(10) | AT91_SMC_CYCLE_NRD(6),
&smc1->cs[0].cycle);
/*
* Configure behavior at external wait signal, byte-select mode, 16 bit
* data bus width, none data float wait states and TDF optimization
*/
at91_sys_write(AT91_SMC1_MODE(0),
AT91_SMC_READMODE | AT91_SMC_EXNWMODE_READY |
AT91_SMC_BAT_SELECT | AT91_SMC_DBW_16 | AT91_SMC_TDF_(0) |
AT91_SMC_TDFMODE);
writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_EXNW_READY |
AT91_SMC_MODE_DBW_16 | AT91_SMC_MODE_TDF_CYCLE(0) |
AT91_SMC_MODE_TDF, &smc1->cs[0].mode);
/* Configure RDY/BSY */
at91_set_B_periph(AT91_PIN_PE20, 0); /* EBI1_NWAIT */
at91_set_b_periph(AT91_PIO_PORTE, 20, 0); /* EBI1_NWAIT */
}
#ifdef CONFIG_LCD
@ -164,43 +169,44 @@ vidinfo_t panel_info = {
void lcd_enable(void)
{
at91_set_gpio_value(AT91_PIN_PA30, 0); /* power up */
at91_set_pio_value(AT91_PIO_PORTA, 30, 0); /* power up */
}
void lcd_disable(void)
{
at91_set_gpio_value(AT91_PIN_PA30, 1); /* power down */
at91_set_pio_value(AT91_PIO_PORTA, 30, 1); /* power down */
}
static void otc570_lcd_hw_init(void)
{
at91_set_A_periph(AT91_PIN_PC0, 0); /* LCDVSYNC */
at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */
at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */
at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */
at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */
at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */
at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */
at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */
at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */
at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */
at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */
at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */
at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */
at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */
at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD13 */
at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */
at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */
at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */
at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */
at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */
at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD21 */
at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */
at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */
at91_set_gpio_output(AT91_PIN_PA30, 1); /* PCI */
at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_LCDC);
at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDVSYNC */
at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDHSYNC */
at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDDOTCK */
at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDDEN */
at91_set_b_periph(AT91_PIO_PORTB, 9, 0); /* LCDCC */
at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD2 */
at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD3 */
at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD4 */
at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD5 */
at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD6 */
at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD7 */
at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD10 */
at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD11 */
at91_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD12 */
at91_set_b_periph(AT91_PIO_PORTC, 12, 0); /* LCDD13 */
at91_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD14 */
at91_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD15 */
at91_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD18 */
at91_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD19 */
at91_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDD20 */
at91_set_b_periph(AT91_PIO_PORTC, 17, 0); /* LCDD21 */
at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDD22 */
at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDD23 */
at91_set_pio_output(AT91_PIO_PORTA, 30, 1); /* PCI */
writel(1 << AT91SAM9263_ID_LCDC, &pmc->pcer);
gd->fb_base = CONFIG_OTC570_LCD_BASE;
}
@ -242,7 +248,7 @@ int board_eth_init(bd_t *bis)
{
int rc = 0;
#ifdef CONFIG_MACB
rc = macb_eth_initialize(0, (void *)AT91SAM9263_BASE_EMAC, 0x00);
rc = macb_eth_initialize(0, (void *)AT91_EMAC_BASE, 0x00);
#endif
return rc;
}
@ -290,32 +296,33 @@ u32 get_board_rev(void)
#ifdef CONFIG_MISC_INIT_R
int misc_init_r(void)
{
char str[64];
char str[64];
at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
at91_set_gpio_output(AT91_PIN_PA29, 1);
at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */
at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */
at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US0);
at91_set_pio_output(AT91_PIO_PORTA, 29, 1);
at91_set_a_periph(AT91_PIO_PORTA, 26, 1); /* TXD0 */
at91_set_a_periph(AT91_PIO_PORTA, 27, 0); /* RXD0 */
writel(1 << AT91SAM9263_ID_US0, &pmc->pcer);
/* Set USART_MODE = 1 (RS485) */
at91_sys_write((0xFFF8C004 - AT91_BASE_SYS), 1);
writel(1, 0xFFF8C004);
printf("USART0: ");
if (getenv_r("usart0", str, sizeof(str)) == -1) {
printf("No entry - assuming 1-wire\n");
/* CTS pin, works as mode select pin (0 = 1-wire; 1 = RS485) */
at91_set_gpio_output(AT91_PIN_PA29, 0);
at91_set_pio_output(AT91_PIO_PORTA, 29, 0);
} else {
if (strcmp(str, "1-wire") == 0) {
printf("%s\n", str);
at91_set_gpio_output(AT91_PIN_PA29, 0);
at91_set_pio_output(AT91_PIO_PORTA, 29, 0);
} else if (strcmp(str, "rs485") == 0) {
printf("%s\n", str);
at91_set_gpio_output(AT91_PIN_PA29, 1);
at91_set_pio_output(AT91_PIO_PORTA, 29, 1);
} else {
printf("Wrong entry - assuming 1-wire ");
printf("(valid values are '1-wire' or 'rs485')\n");
at91_set_gpio_output(AT91_PIN_PA29, 0);
at91_set_pio_output(AT91_PIO_PORTA, 29, 0);
}
}
printf("Display memory address: 0x%08lX\n", gd->fb_base);
@ -326,14 +333,17 @@ int misc_init_r(void)
int board_init(void)
{
at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
/* Peripheral Clock Enable Register */
at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_PIOA |
1 << AT91SAM9263_ID_PIOB |
1 << AT91SAM9263_ID_PIOCDE |
1 << AT91SAM9263_ID_TWI |
1 << AT91SAM9263_ID_SPI0 |
1 << AT91SAM9263_ID_LCDC |
1 << AT91SAM9263_ID_UHP);
writel( 1 << AT91SAM9263_ID_PIOA |
1 << AT91SAM9263_ID_PIOB |
1 << AT91SAM9263_ID_PIOCDE |
1 << AT91SAM9263_ID_TWI |
1 << AT91SAM9263_ID_SPI0 |
1 << AT91SAM9263_ID_LCDC |
1 << AT91SAM9263_ID_UHP,
&pmc->pcer);
/* arch number of OTC570-Board */
gd->bd->bi_arch_number = MACH_TYPE_OTC570;

View file

@ -55,6 +55,7 @@
/*
* Hardware drivers
*/
#define CONFIG_AT91_GPIO 1
/* Console output */
#define CONFIG_ATMEL_USART 1
@ -96,24 +97,22 @@
#ifdef CONFIG_SOFT_I2C
#define CONFIG_I2C_CMD_TREE 1
#define CONFIG_I2C_MULTI_BUS 1
/* Enable peripheral clock and configure data and clock pins for pio */
/* Configure data and clock pins for pio */
#define I2C_INIT { \
at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_PIOB | \
1 << AT91SAM9263_ID_PIOCDE); \
at91_set_gpio_output(AT91_PIN_PB4, 0); \
at91_set_gpio_output(AT91_PIN_PB5, 0); \
at91_set_pio_output(AT91_PIO_PORTB, 4, 0); \
at91_set_pio_output(AT91_PIO_PORTB, 5, 0); \
}
/* Configure data pin as output */
#define I2C_ACTIVE at91_set_gpio_output(AT91_PIN_PB4, 0)
#define I2C_ACTIVE at91_set_pio_output(AT91_PIO_PORTB, 4, 0)
/* Configure data pin as input */
#define I2C_TRISTATE at91_set_gpio_input(AT91_PIN_PB4, 0)
#define I2C_TRISTATE at91_set_pio_input(AT91_PIO_PORTB, 4, 0)
/* Read data pin */
#define I2C_READ at91_get_gpio_value(AT91_PIN_PB4)
#define I2C_READ at91_get_pio_value(AT91_PIO_PORTB, 4)
/* Set data pin */
#define I2C_SDA(bit) at91_set_gpio_value(AT91_PIN_PB4, bit)
#define I2C_SDA(bit) at91_set_pio_value(AT91_PIO_PORTB, 4, bit)
/* Set clock pin */
#define I2C_SCL(bit) at91_set_gpio_value(AT91_PIN_PB5, bit)
#define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */
#define I2C_SCL(bit) at91_set_pio_value(AT91_PIO_PORTB, 5, bit)
#define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */
#endif /* CONFIG_SOFT_I2C */
#define CONFIG_BOOTDELAY 3
@ -173,8 +172,8 @@
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
/* our CLE is AD22 */
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA22
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 15
#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTA, 22
#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#endif