mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-11 07:34:31 +00:00
board: gateworks: venice: add imx8mm-gw7904 support
The GW7904 is based on the i.MX 8M Mini SoC featuring: - LPDDR4 DRAM - eMMC FLASH - microSD connector with UHS support - LIS2DE12 3-axis accelerometer - Gateworks System Controller - IMX8M FEC - 2x RS232 off-board connectors - PMIC - 10x bi-color LED's - 1x miniPCIe socket with PCIe and USB2.0 - 802.3at Class 4 PoE - 10-30VDC input via barrel-jack Signed-off-by: Tim Harvey <tharvey@gateworks.com>
This commit is contained in:
Tim Harvey
Stefano Babic
parent
864ac2cf38
commit
61e7f97325
4 changed files with 933 additions and 1 deletions
|
|
@ -957,6 +957,7 @@ dtb-$(CONFIG_ARCH_IMX8M) += \
|
|||
imx8mm-venice-gw7901.dtb \
|
||||
imx8mm-venice-gw7902.dtb \
|
||||
imx8mm-venice-gw7903.dtb \
|
||||
imx8mm-venice-gw7904.dtb \
|
||||
imx8mm-verdin-wifi-dev.dtb \
|
||||
phycore-imx8mm.dtb \
|
||||
imx8mn-bsh-smm-s2.dtb \
|
||||
|
|
|
|||
46
arch/arm/dts/imx8mm-venice-gw7904-u-boot.dtsi
Normal file
46
arch/arm/dts/imx8mm-venice-gw7904-u-boot.dtsi
Normal file
|
|
@ -0,0 +1,46 @@
|
|||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* Copyright 2022 Gateworks Corporation
|
||||
*/
|
||||
|
||||
#include "imx8mm-venice-u-boot.dtsi"
|
||||
|
||||
&gpio1 {
|
||||
rs232en {
|
||||
gpio-hog;
|
||||
output-low;
|
||||
gpios = <12 GPIO_ACTIVE_HIGH>;
|
||||
line-name = "rs232_en#";
|
||||
};
|
||||
};
|
||||
|
||||
&gpio5 {
|
||||
pci_wdis {
|
||||
gpio-hog;
|
||||
output-high;
|
||||
gpios = <12 GPIO_ACTIVE_HIGH>;
|
||||
line-name = "pci_wdis#";
|
||||
};
|
||||
};
|
||||
|
||||
&fec1 {
|
||||
phy-reset-gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
|
||||
phy-reset-duration = <1>;
|
||||
phy-reset-post-delay = <300>;
|
||||
};
|
||||
|
||||
&pinctrl_fec1 {
|
||||
u-boot,dm-spl;
|
||||
};
|
||||
|
||||
&{/soc@0/bus@30800000/i2c@30a30000/pmic@4b} {
|
||||
u-boot,dm-spl;
|
||||
};
|
||||
|
||||
&{/soc@0/bus@30800000/i2c@30a30000/pmic@4b/regulators} {
|
||||
u-boot,dm-spl;
|
||||
};
|
||||
|
||||
&pinctrl_pmic {
|
||||
u-boot,dm-spl;
|
||||
};
|
||||
884
arch/arm/dts/imx8mm-venice-gw7904.dts
Normal file
884
arch/arm/dts/imx8mm-venice-gw7904.dts
Normal file
|
|
@ -0,0 +1,884 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright 2022 Gateworks Corporation
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/linux-event-codes.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/phy/phy-imx8-pcie.h>
|
||||
|
||||
#include "imx8mm.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Gateworks Venice GW7904 i.MX8MM board";
|
||||
compatible = "gateworks,imx8mm-gw7904", "fsl,imx8mm";
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart2;
|
||||
};
|
||||
|
||||
memory@40000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x40000000 0 0x80000000>;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
key-0 {
|
||||
label = "user_pb";
|
||||
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_0>;
|
||||
};
|
||||
|
||||
key-1 {
|
||||
label = "user_pb1x";
|
||||
linux,code = <BTN_1>;
|
||||
interrupt-parent = <&gsc>;
|
||||
interrupts = <0>;
|
||||
};
|
||||
|
||||
key-2 {
|
||||
label = "key_erased";
|
||||
linux,code = <BTN_2>;
|
||||
interrupt-parent = <&gsc>;
|
||||
interrupts = <1>;
|
||||
};
|
||||
|
||||
key-3 {
|
||||
label = "eeprom_wp";
|
||||
linux,code = <BTN_3>;
|
||||
interrupt-parent = <&gsc>;
|
||||
interrupts = <2>;
|
||||
};
|
||||
|
||||
key-4 {
|
||||
label = "switch_hold";
|
||||
linux,code = <BTN_5>;
|
||||
interrupt-parent = <&gsc>;
|
||||
interrupts = <7>;
|
||||
};
|
||||
};
|
||||
|
||||
led-controller {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_gpio_leds>;
|
||||
|
||||
led-0 {
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
label = "led01_grn";
|
||||
gpios = <&gpioled 0 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led-1 {
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_YELLOW>;
|
||||
label = "led01_yel";
|
||||
gpios = <&gpioled 1 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led-2 {
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
label = "led02_grn";
|
||||
gpios = <&gpioled 2 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led-3 {
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_YELLOW>;
|
||||
label = "led02_yel";
|
||||
gpios = <&gpioled 3 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led-4 {
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
label = "led03_grn";
|
||||
gpios = <&gpioled 4 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led-5 {
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_YELLOW>;
|
||||
label = "led03_yel";
|
||||
gpios = <&gpioled 5 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led-6 {
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
label = "led04_grn";
|
||||
gpios = <&gpioled 6 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led-7 {
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_YELLOW>;
|
||||
label = "led04_yel";
|
||||
gpios = <&gpioled 7 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led-8 {
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
label = "led05_grn";
|
||||
gpios = <&gpioled 8 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led-9 {
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_YELLOW>;
|
||||
label = "led05_yel";
|
||||
gpios = <&gpioled 9 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led-10 {
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
label = "led06_grn";
|
||||
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led-11 {
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
label = "led06_red";
|
||||
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led-12 {
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
label = "led07_grn";
|
||||
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led-13 {
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
label = "led07_red";
|
||||
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led-14 {
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
label = "led08_grn";
|
||||
gpios = <&gpioled 10 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led-15 {
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_YELLOW>;
|
||||
label = "led08_yel";
|
||||
gpios = <&gpioled 11 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led-16 {
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
label = "led09_grn";
|
||||
gpios = <&gpioled 12 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led-17 {
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_YELLOW>;
|
||||
label = "led09_yel";
|
||||
gpios = <&gpioled 13 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led-18 {
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
label = "led10_grn";
|
||||
gpios = <&gpioled 14 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led-19 {
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_YELLOW>;
|
||||
label = "led10_yel";
|
||||
gpios = <&gpioled 15 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
pcie0_refclk: pcie0-refclk {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <100000000>;
|
||||
};
|
||||
|
||||
reg_3p3v: regulator-3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "3P3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
&A53_0 {
|
||||
cpu-supply = <&buck2>;
|
||||
};
|
||||
|
||||
&A53_1 {
|
||||
cpu-supply = <&buck2>;
|
||||
};
|
||||
|
||||
&A53_2 {
|
||||
cpu-supply = <&buck2>;
|
||||
};
|
||||
|
||||
&A53_3 {
|
||||
cpu-supply = <&buck2>;
|
||||
};
|
||||
|
||||
&ddrc {
|
||||
operating-points-v2 = <&ddrc_opp_table>;
|
||||
|
||||
ddrc_opp_table: opp-table {
|
||||
compatible = "operating-points-v2";
|
||||
|
||||
opp-25M {
|
||||
opp-hz = /bits/ 64 <25000000>;
|
||||
};
|
||||
|
||||
opp-100M {
|
||||
opp-hz = /bits/ 64 <100000000>;
|
||||
};
|
||||
|
||||
opp-750M {
|
||||
opp-hz = /bits/ 64 <750000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&fec1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_fec1>;
|
||||
phy-mode = "rgmii-id";
|
||||
phy-handle = <ðphy0>;
|
||||
local-mac-address = [00 00 00 00 00 00];
|
||||
status = "okay";
|
||||
|
||||
mdio {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
ethphy0: ethernet-phy@0 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpio1 {
|
||||
gpio-line-names = "", "", "", "", "", "", "", "",
|
||||
"", "", "", "", "rs232_en#", "", "", "",
|
||||
"", "", "", "", "", "", "", "",
|
||||
"", "", "", "", "", "", "", "";
|
||||
};
|
||||
|
||||
&gpio5 {
|
||||
gpio-line-names = "", "", "", "", "", "", "", "",
|
||||
"", "", "", "", "pci_wdis#", "", "", "",
|
||||
"", "", "", "", "", "", "", "",
|
||||
"", "", "", "", "", "", "", "";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
clock-frequency = <100000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c1>;
|
||||
status = "okay";
|
||||
|
||||
gsc: gsc@20 {
|
||||
compatible = "gw,gsc";
|
||||
reg = <0x20>;
|
||||
pinctrl-0 = <&pinctrl_gsc>;
|
||||
interrupt-parent = <&gpio4>;
|
||||
interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
|
||||
adc {
|
||||
compatible = "gw,gsc-adc";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
channel@6 {
|
||||
gw,mode = <0>;
|
||||
reg = <0x06>;
|
||||
label = "temp";
|
||||
};
|
||||
|
||||
channel@82 {
|
||||
gw,mode = <2>;
|
||||
reg = <0x82>;
|
||||
label = "vin";
|
||||
gw,voltage-divider-ohms = <22100 1000>;
|
||||
gw,voltage-offset-microvolt = <700000>;
|
||||
};
|
||||
|
||||
channel@84 {
|
||||
gw,mode = <2>;
|
||||
reg = <0x84>;
|
||||
label = "vdd_5p0";
|
||||
gw,voltage-divider-ohms = <10000 10000>;
|
||||
};
|
||||
|
||||
channel@86 {
|
||||
gw,mode = <2>;
|
||||
reg = <0x86>;
|
||||
label = "vdd_3p3";
|
||||
gw,voltage-divider-ohms = <10000 10000>;
|
||||
};
|
||||
|
||||
channel@88 {
|
||||
gw,mode = <2>;
|
||||
reg = <0x88>;
|
||||
label = "vdd_0p9";
|
||||
};
|
||||
|
||||
channel@8c {
|
||||
gw,mode = <2>;
|
||||
reg = <0x8c>;
|
||||
label = "vdd_soc";
|
||||
};
|
||||
|
||||
channel@8e {
|
||||
gw,mode = <2>;
|
||||
reg = <0x8e>;
|
||||
label = "vdd_arm";
|
||||
};
|
||||
|
||||
channel@90 {
|
||||
gw,mode = <2>;
|
||||
reg = <0x90>;
|
||||
label = "vdd_1p8";
|
||||
};
|
||||
|
||||
channel@92 {
|
||||
gw,mode = <2>;
|
||||
reg = <0x92>;
|
||||
label = "vdd_dram";
|
||||
};
|
||||
|
||||
channel@a2 {
|
||||
gw,mode = <2>;
|
||||
reg = <0xa2>;
|
||||
label = "vdd_gsc";
|
||||
gw,voltage-divider-ohms = <10000 10000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gpio: gpio@23 {
|
||||
compatible = "nxp,pca9555";
|
||||
reg = <0x23>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-parent = <&gsc>;
|
||||
interrupts = <4>;
|
||||
};
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "atmel,24c02";
|
||||
reg = <0x50>;
|
||||
pagesize = <16>;
|
||||
};
|
||||
|
||||
eeprom@51 {
|
||||
compatible = "atmel,24c02";
|
||||
reg = <0x51>;
|
||||
pagesize = <16>;
|
||||
};
|
||||
|
||||
eeprom@52 {
|
||||
compatible = "atmel,24c02";
|
||||
reg = <0x52>;
|
||||
pagesize = <16>;
|
||||
};
|
||||
|
||||
eeprom@53 {
|
||||
compatible = "atmel,24c02";
|
||||
reg = <0x53>;
|
||||
pagesize = <16>;
|
||||
};
|
||||
|
||||
rtc@68 {
|
||||
compatible = "dallas,ds1672";
|
||||
reg = <0x68>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
clock-frequency = <400000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c2>;
|
||||
status = "okay";
|
||||
|
||||
pmic@4b {
|
||||
compatible = "rohm,bd71847";
|
||||
reg = <0x4b>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pmic>;
|
||||
interrupt-parent = <&gpio3>;
|
||||
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
|
||||
rohm,reset-snvs-powered;
|
||||
#clock-cells = <0>;
|
||||
clocks = <&osc_32k 0>;
|
||||
clock-output-names = "clk-32k-out";
|
||||
|
||||
regulators {
|
||||
/* vdd_soc: 0.805-0.900V (typ=0.8V) */
|
||||
BUCK1 {
|
||||
regulator-name = "buck1";
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-ramp-delay = <1250>;
|
||||
};
|
||||
|
||||
/* vdd_arm: 0.805-1.0V (typ=0.9V) */
|
||||
buck2: BUCK2 {
|
||||
regulator-name = "buck2";
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-ramp-delay = <1250>;
|
||||
rohm,dvs-run-voltage = <1000000>;
|
||||
rohm,dvs-idle-voltage = <900000>;
|
||||
};
|
||||
|
||||
/* vdd_0p9: 0.805-1.0V (typ=0.9V) */
|
||||
BUCK3 {
|
||||
regulator-name = "buck3";
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* vdd_3p3 */
|
||||
BUCK4 {
|
||||
regulator-name = "buck4";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* vdd_1p8 */
|
||||
BUCK5 {
|
||||
regulator-name = "buck5";
|
||||
regulator-min-microvolt = <1605000>;
|
||||
regulator-max-microvolt = <1995000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* vdd_dram */
|
||||
BUCK6 {
|
||||
regulator-name = "buck6";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* nvcc_snvs_1p8 */
|
||||
LDO1 {
|
||||
regulator-name = "ldo1";
|
||||
regulator-min-microvolt = <1600000>;
|
||||
regulator-max-microvolt = <1900000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* vdd_snvs_0p8 */
|
||||
LDO2 {
|
||||
regulator-name = "ldo2";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* vdda_1p8 */
|
||||
LDO3 {
|
||||
regulator-name = "ldo3";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
LDO4 {
|
||||
regulator-name = "ldo4";
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
LDO6 {
|
||||
regulator-name = "ldo6";
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
clock-frequency = <400000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c3>;
|
||||
status = "okay";
|
||||
|
||||
accelerometer@19 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_accel>;
|
||||
compatible = "st,lis2de12";
|
||||
reg = <0x19>;
|
||||
st,drdy-int-pin = <1>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
|
||||
interrupt-names = "INT1";
|
||||
};
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
clock-frequency = <400000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c4>;
|
||||
status = "okay";
|
||||
|
||||
gpioled: gpio@27 {
|
||||
compatible = "nxp,pca9555";
|
||||
reg = <0x27>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie_phy {
|
||||
fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
|
||||
fsl,clkreq-unsupported;
|
||||
clocks = <&pcie0_refclk>;
|
||||
clock-names = "ref";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pcie0>;
|
||||
reset-gpio = <&gpio5 11 GPIO_ACTIVE_LOW>;
|
||||
clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
|
||||
<&pcie0_refclk>;
|
||||
clock-names = "pcie", "pcie_aux", "pcie_bus";
|
||||
assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
|
||||
<&clk IMX8MM_CLK_PCIE1_CTRL>;
|
||||
assigned-clock-rates = <10000000>, <250000000>;
|
||||
assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
|
||||
<&clk IMX8MM_SYS_PLL2_250M>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* off-board RS232 */
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* console */
|
||||
&uart2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* off-board RS232 */
|
||||
&uart3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbotg1 {
|
||||
dr_mode = "host";
|
||||
disable-over-current;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* microSD */
|
||||
&usdhc2 {
|
||||
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
||||
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
|
||||
pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
|
||||
pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
|
||||
cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
|
||||
bus-width = <4>;
|
||||
vmmc-supply = <®_3p3v>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* eMMC */
|
||||
&usdhc3 {
|
||||
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
||||
pinctrl-0 = <&pinctrl_usdhc3>;
|
||||
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
|
||||
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
|
||||
bus-width = <8>;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wdog1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_wdog>;
|
||||
fsl,ext-reset-output;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&iomuxc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_hog>;
|
||||
|
||||
pinctrl_hog: hoggrp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x40000041 /* RS232# */
|
||||
MX8MM_IOMUXC_ECSPI2_MISO_GPIO5_IO12 0x40000041 /* PCI_WDIS# */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_accel: accelgrp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x159
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_fec1: fec1grp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3
|
||||
MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
|
||||
MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
|
||||
MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
|
||||
MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
|
||||
MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
|
||||
MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
|
||||
MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
|
||||
MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
|
||||
MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
|
||||
MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
|
||||
MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
|
||||
MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
|
||||
MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
|
||||
MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24 0x19 /* IRQ# */
|
||||
MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25 0x19 /* RST# */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_gpio_leds: gpioledsgrp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x40000019
|
||||
MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x40000019
|
||||
MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x40000019
|
||||
MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x40000019
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_gsc: gscgrp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26 0x159
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c1: i2c1grp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
|
||||
MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c2: i2c2grp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3
|
||||
MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c3: i2c3grp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
|
||||
MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c4: i2c4grp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3
|
||||
MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pcie0: pciegrp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_ECSPI2_MOSI_GPIO5_IO11 0x41
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pmic: pmicgrp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8 0x41
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart1: uart1grp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
|
||||
MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart2: uart2grp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
|
||||
MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart3: uart3grp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140
|
||||
MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc2: usdhc2grp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
|
||||
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
|
||||
MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
|
||||
MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
|
||||
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
|
||||
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
|
||||
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
|
||||
MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
|
||||
MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
|
||||
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
|
||||
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
|
||||
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
|
||||
MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
|
||||
MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
|
||||
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
|
||||
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4
|
||||
MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc3: usdhc3grp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190
|
||||
MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
|
||||
MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
|
||||
MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
|
||||
MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
|
||||
MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
|
||||
MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0
|
||||
MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0
|
||||
MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0
|
||||
MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0
|
||||
MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194
|
||||
MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
|
||||
MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
|
||||
MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
|
||||
MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
|
||||
MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
|
||||
MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4
|
||||
MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4
|
||||
MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4
|
||||
MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4
|
||||
MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196
|
||||
MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
|
||||
MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
|
||||
MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
|
||||
MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
|
||||
MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
|
||||
MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6
|
||||
MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6
|
||||
MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6
|
||||
MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6
|
||||
MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_wdog: wdoggrp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
|
@ -172,7 +172,8 @@ static int power_init_board(void)
|
|||
|
||||
else if ((!strncmp(model, "GW7901", 6)) ||
|
||||
(!strncmp(model, "GW7902", 6)) ||
|
||||
(!strncmp(model, "GW7903", 6))) {
|
||||
(!strncmp(model, "GW7903", 6)) ||
|
||||
(!strncmp(model, "GW7904", 6))) {
|
||||
if (!strncmp(model, "GW7902", 6))
|
||||
ret = uclass_get_device_by_seq(UCLASS_I2C, 0, &bus);
|
||||
else
|
||||
|
|
|
|||
Loading…
Reference in a new issue