Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-10 23:24:38 +00:00
Code Issues Projects Releases Packages Wiki Activity

qspi:fsl implement AHB read

Browse source 
The QSPI controller in i.MX 6SoloX and Vybrid supports reading data using
IP register and AHB bus.

The original driver only supports reading data from IP interface. The IC
team suggests to use AHB read which is faster then IP read. Using AHB read,
we can directly memcpy, a "missed" access to the buffer will cause the
controller to clear the buffer and use the SEQID stored in bfgencr register
to initiate a read from flash device.

Since AHB bus is 64 bit width, we can not set MCR register using 32bit. In
order to minimize code change, redefine QSPI_MCR_END_CFD_LE to 64bit Little
endian but not 32bit Little endia.

Introduce a new configuration option CONFIG_SYS_FSL_QSPI_AHB. If want to
use AHB read, just define CONFIG_SYS_FSL_QSPI_AHB. If not, just ignore it.
Actually if Vybrid is migrated to use AHB read, this option can be removed and
IP read function can be discared. The reason to introduce this option
is that only i.MX SOC is tested in my side, no Vybrid platform for me.

In spi_setup_slave, the original piece code to set AHB is deleted, since
Vybrid platform does not use this to intiate AHB read. Instead, add
qspi_init_ahb_read function if defined CONFIG_SYS_FSL_QSPI_AHB.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
This commit is contained in:
Peng Fan 2015-01-08 10:40:20 +08:00 committed by Jagannadha Sutradharudu Teki
parent 78c80114b5
commit 5f7f70c171
2 changed files with 142 additions and 10 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

137
drivers/spi/fsl_qspi.c
View file

@ -263,6 +263,110 @@ static void qspi_set_lut(struct fsl_qspi *qspi)
qspi_write32(&regs->lckcr, QSPI_LCKCR_LOCK);
}
#if defined(CONFIG_SYS_FSL_QSPI_AHB)
/*
* If we have changed the content of the flash by writing or erasing,
* we need to invalidate the AHB buffer. If we do not do so, we may read out
* the wrong data. The spec tells us reset the AHB domain and Serial Flash
* domain at the same time.
*/
static inline void qspi_ahb_invalid(struct fsl_qspi *q)
{
struct fsl_qspi_regs *regs = (struct fsl_qspi_regs *)q->reg_base;
u32 reg;
reg = qspi_read32(&regs->mcr);
reg |= QSPI_MCR_SWRSTHD_MASK | QSPI_MCR_SWRSTSD_MASK;
qspi_write32(&regs->mcr, reg);
/*
* The minimum delay : 1 AHB + 2 SFCK clocks.
* Delay 1 us is enough.
*/
udelay(1);
reg &= ~(QSPI_MCR_SWRSTHD_MASK | QSPI_MCR_SWRSTSD_MASK);
qspi_write32(&regs->mcr, reg);
}
/* Read out the data from the AHB buffer. */
static inline void qspi_ahb_read(struct fsl_qspi *q, u8 *rxbuf, int len)
{
struct fsl_qspi_regs *regs = (struct fsl_qspi_regs *)q->reg_base;
u32 mcr_reg;
mcr_reg = qspi_read32(&regs->mcr);
qspi_write32(&regs->mcr, QSPI_MCR_CLR_RXF_MASK | QSPI_MCR_CLR_TXF_MASK |
QSPI_MCR_RESERVED_MASK | QSPI_MCR_END_CFD_LE);
/* Read out the data directly from the AHB buffer. */
memcpy(rxbuf, (u8 *)(q->amba_base + q->sf_addr), len);
qspi_write32(&regs->mcr, mcr_reg);
}
static void qspi_enable_ddr_mode(struct fsl_qspi_regs *regs)
{
u32 reg, reg2;
reg = qspi_read32(&regs->mcr);
/* Disable the module */
qspi_write32(&regs->mcr, reg | QSPI_MCR_MDIS_MASK);
/* Set the Sampling Register for DDR */
reg2 = qspi_read32(&regs->smpr);
reg2 &= ~QSPI_SMPR_DDRSMP_MASK;
reg2 |= (2 << QSPI_SMPR_DDRSMP_SHIFT);
qspi_write32(&regs->smpr, reg2);
/* Enable the module again (enable the DDR too) */
reg |= QSPI_MCR_DDR_EN_MASK;
/* Enable bit 29 for imx6sx */
reg |= (1 << 29);
qspi_write32(&regs->mcr, reg);
}
/*
* There are two different ways to read out the data from the flash:
* the "IP Command Read" and the "AHB Command Read".
*
* The IC guy suggests we use the "AHB Command Read" which is faster
* then the "IP Command Read". (What's more is that there is a bug in
* the "IP Command Read" in the Vybrid.)
*
* After we set up the registers for the "AHB Command Read", we can use
* the memcpy to read the data directly. A "missed" access to the buffer
* causes the controller to clear the buffer, and use the sequence pointed
* by the QUADSPI_BFGENCR[SEQID] to initiate a read from the flash.
*/
static void qspi_init_ahb_read(struct fsl_qspi_regs *regs)
{
/* AHB configuration for access buffer 0/1/2 .*/
qspi_write32(&regs->buf0cr, QSPI_BUFXCR_INVALID_MSTRID);
qspi_write32(&regs->buf1cr, QSPI_BUFXCR_INVALID_MSTRID);
qspi_write32(&regs->buf2cr, QSPI_BUFXCR_INVALID_MSTRID);
qspi_write32(&regs->buf3cr, QSPI_BUF3CR_ALLMST_MASK |
(0x80 << QSPI_BUF3CR_ADATSZ_SHIFT));
/* We only use the buffer3 */
qspi_write32(&regs->buf0ind, 0);
qspi_write32(&regs->buf1ind, 0);
qspi_write32(&regs->buf2ind, 0);
/*
* Set the default lut sequence for AHB Read.
* Parallel mode is disabled.
*/
qspi_write32(&regs->bfgencr,
SEQID_FAST_READ << QSPI_BFGENCR_SEQID_SHIFT);
/*Enable DDR Mode*/
qspi_enable_ddr_mode(regs);
}
#endif
void spi_init()
{
/* do nothing */
@ -273,8 +377,8 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
{
struct fsl_qspi *qspi;
struct fsl_qspi_regs *regs;
u32 reg_val, smpr_val;
u32 total_size, seq_id;
u32 smpr_val;
u32 total_size;
if (bus >= ARRAY_SIZE(spi_bases))
return NULL;
@ -329,13 +433,9 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
qspi_write32(&regs->smpr, smpr_val);
qspi_write32(&regs->mcr, QSPI_MCR_RESERVED_MASK);
seq_id = 0;
reg_val = qspi_read32(&regs->bfgencr);
reg_val &= ~QSPI_BFGENCR_SEQID_MASK;
reg_val |= (seq_id << QSPI_BFGENCR_SEQID_SHIFT);
reg_val &= ~QSPI_BFGENCR_PAR_EN_MASK;
qspi_write32(&regs->bfgencr, reg_val);
#ifdef CONFIG_SYS_FSL_QSPI_AHB
qspi_init_ahb_read(regs);
#endif
return &qspi->slave;
}
@ -426,6 +526,8 @@ static void qspi_op_rdid(struct fsl_qspi *qspi, u32 *rxbuf, u32 len)
qspi_write32(&regs->mcr, mcr_reg);
}
#ifndef CONFIG_SYS_FSL_QSPI_AHB
/* If not use AHB read, read data from ip interface */
static void qspi_op_read(struct fsl_qspi *qspi, u32 *rxbuf, u32 len)
{
struct fsl_qspi_regs *regs = (struct fsl_qspi_regs *)qspi->reg_base;
@ -469,6 +571,7 @@ static void qspi_op_read(struct fsl_qspi *qspi, u32 *rxbuf, u32 len)
qspi_write32(&regs->mcr, mcr_reg);
}
#endif
static void qspi_op_write(struct fsl_qspi *qspi, u8 *txbuf, u32 len)
{
@ -643,8 +746,13 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
}
if (din) {
if (qspi->cur_seqid == QSPI_CMD_FAST_READ)
if (qspi->cur_seqid == QSPI_CMD_FAST_READ) {
#ifdef CONFIG_SYS_FSL_QSPI_AHB
qspi_ahb_read(qspi, din, bytes);
#else
qspi_op_read(qspi, din, bytes);
#endif
}
else if (qspi->cur_seqid == QSPI_CMD_RDID)
qspi_op_rdid(qspi, din, bytes);
else if (qspi->cur_seqid == QSPI_CMD_RDSR)
@ -658,6 +766,15 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
#endif
}
#ifdef CONFIG_SYS_FSL_QSPI_AHB
if ((qspi->cur_seqid == QSPI_CMD_SE) ||
(qspi->cur_seqid == QSPI_CMD_PP) ||
(qspi->cur_seqid == QSPI_CMD_BE_4K) ||
(qspi->cur_seqid == QSPI_CMD_WREAR) ||
(qspi->cur_seqid == QSPI_CMD_BRWR))
qspi_ahb_invalid(qspi);
#endif
return 0;
}

15
drivers/spi/fsl_qspi.h
View file

@ -58,7 +58,12 @@ struct fsl_qspi_regs {
#define QSPI_MCR_END_CFD_SHIFT 2
#define QSPI_MCR_END_CFD_MASK (3 << QSPI_MCR_END_CFD_SHIFT)
#ifdef CONFIG_SYS_FSL_QSPI_AHB
/* AHB needs 64bit operation */
#define QSPI_MCR_END_CFD_LE (3 << QSPI_MCR_END_CFD_SHIFT)
#else
#define QSPI_MCR_END_CFD_LE (1 << QSPI_MCR_END_CFD_SHIFT)
#endif
#define QSPI_MCR_DDR_EN_SHIFT 7
#define QSPI_MCR_DDR_EN_MASK (1 << QSPI_MCR_DDR_EN_SHIFT)
#define QSPI_MCR_CLR_RXF_SHIFT 10
@ -69,6 +74,10 @@ struct fsl_qspi_regs {
#define QSPI_MCR_MDIS_MASK (1 << QSPI_MCR_MDIS_SHIFT)
#define QSPI_MCR_RESERVED_SHIFT 16
#define QSPI_MCR_RESERVED_MASK (0xf << QSPI_MCR_RESERVED_SHIFT)
#define QSPI_MCR_SWRSTHD_SHIFT 1
#define QSPI_MCR_SWRSTHD_MASK (1 << QSPI_MCR_SWRSTHD_SHIFT)
#define QSPI_MCR_SWRSTSD_SHIFT 0
#define QSPI_MCR_SWRSTSD_MASK (1 << QSPI_MCR_SWRSTSD_SHIFT)
#define QSPI_SMPR_HSENA_SHIFT 0
#define QSPI_SMPR_HSENA_MASK (1 << QSPI_SMPR_HSENA_SHIFT)
@ -79,6 +88,12 @@ struct fsl_qspi_regs {
#define QSPI_SMPR_DDRSMP_SHIFT 16
#define QSPI_SMPR_DDRSMP_MASK (7 << QSPI_SMPR_DDRSMP_SHIFT)
#define QSPI_BUFXCR_INVALID_MSTRID 0xe
#define QSPI_BUF3CR_ALLMST_SHIFT 31
#define QSPI_BUF3CR_ALLMST_MASK (1 << QSPI_BUF3CR_ALLMST_SHIFT)
#define QSPI_BUF3CR_ADATSZ_SHIFT 8
#define QSPI_BUF3CR_ADATSZ_MASK (0xFF << QSPI_BUF3CR_ADATSZ_SHIFT)
#define QSPI_BFGENCR_SEQID_SHIFT 12
#define QSPI_BFGENCR_SEQID_MASK (0xf << QSPI_BFGENCR_SEQID_SHIFT)
#define QSPI_BFGENCR_PAR_EN_SHIFT 16