Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-10 23:24:38 +00:00
Code Issues Projects Releases Packages Wiki Activity

armv8: ls1012a: define esdhc_status_fixup for RDB board

Browse source 
On LS1012ARDB board, three dual 1:4 mux/demux devices drive the SDHC2
signals to eMMC, SDIO wifi, SPI and Ardiuno shield. Only when we select
eMMC and SDIO wifi, the SDHC2 could be used. Otherwise, the command
inhibit bits of eSDHC2_PRSSTAT register will never release. This would
cause below continious error messages in linux since it uses polling
mode to detect card.
"mmc1: Controller never released inhibit bit(s)."
"mmc1: Controller never released inhibit bit(s)."
"mmc1: Controller never released inhibit bit(s)."
This patch is to define esdhc_status_fixup function for RDB to disable
SDHC2 status if no SDIO wifi or eMMC is selected.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
This commit is contained in:
Yangbo Lu 2017-01-17 10:43:56 +08:00 committed by York Sun
parent 208e1ae8d1
commit 5e4a6db8f4
1 changed files with 38 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

38
board/freescale/ls1012ardb/ls1012ardb.c
View file

@ -113,6 +113,44 @@ int board_init(void)
return 0;
}
int esdhc_status_fixup(void *blob, const char *compat)
{
char esdhc0_path[] = "/soc/esdhc@1560000";
char esdhc1_path[] = "/soc/esdhc@1580000";
u8 io = 0;
u8 mux_sdhc2;
do_fixup_by_path(blob, esdhc0_path, "status", "okay",
sizeof("okay"), 1);
i2c_set_bus_num(0);
/*
* The I2C IO-expander for mux select is used to control the muxing
* of various onboard interfaces.
*
* IO1[3:2] indicates SDHC2 interface demultiplexer select lines.
* 00 - SDIO wifi
* 01 - GPIO (to Arduino)
* 10 - eMMC Memory
* 11 - SPI
*/
if (i2c_read(I2C_MUX_IO1_ADDR, 0, 1, &io, 1) < 0) {
printf("Error reading i2c boot information!\n");
return 0; /* Don't want to hang() on this error */
}
mux_sdhc2 = (io & 0x0c) >> 2;
/* Enable SDHC2 only when use SDIO wifi and eMMC */
if (mux_sdhc2 == 2 || mux_sdhc2 == 0)
do_fixup_by_path(blob, esdhc1_path, "status", "okay",
sizeof("okay"), 1);
else
do_fixup_by_path(blob, esdhc1_path, "status", "disabled",
sizeof("disabled"), 1);
return 0;
}
int ft_board_setup(void *blob, bd_t *bd)
{
arch_fixup_fdt(blob);