From 05d54b827fa84b7834fc39c9ff7bb77cce829beb Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 24 Jun 2014 17:40:58 -0300 Subject: [PATCH 01/47] mx6: Add support for the mx6solox variant mx6solox is the newest member of the mx6 family. Some of the new features on this variants are: - Cortex M4 microcontroller (besides the CortexA9) - Dual Gigabit Ethernet Add the initial support for it. Signed-off-by: Fabio Estevam --- arch/arm/cpu/armv7/mx6/clock.c | 4 +- arch/arm/cpu/armv7/mx6/soc.c | 26 ++++ arch/arm/imx-common/cpu.c | 2 + arch/arm/include/asm/arch-imx/cpu.h | 3 +- arch/arm/include/asm/arch-mx6/crm_regs.h | 170 ++++++++++++++++++++++ arch/arm/include/asm/arch-mx6/imx-regs.h | 122 +++++++++++++++- arch/arm/include/asm/arch-mx6/mx6-ddr.h | 4 + arch/arm/include/asm/arch-mx6/mx6sx-ddr.h | 45 ++++++ 8 files changed, 369 insertions(+), 7 deletions(-) create mode 100644 arch/arm/include/asm/arch-mx6/mx6sx-ddr.h diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c index 7dd83ec9e1..f8da94be1c 100644 --- a/arch/arm/cpu/armv7/mx6/clock.c +++ b/arch/arm/cpu/armv7/mx6/clock.c @@ -214,7 +214,7 @@ static u32 get_uart_clk(void) u32 reg, uart_podf; u32 freq = decode_pll(PLL_USBOTG, MXC_HCLK) / 6; /* static divider */ reg = __raw_readl(&imx_ccm->cscdr1); -#ifdef CONFIG_MX6SL +#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX)) if (reg & MXC_CCM_CSCDR1_UART_CLK_SEL) freq = MXC_HCLK; #endif @@ -282,7 +282,7 @@ static u32 get_emi_slow_clk(void) return root_freq / (emi_slow_podf + 1); } -#ifdef CONFIG_MX6SL +#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX)) static u32 get_mmdc_ch0_clk(void) { u32 cbcmr = __raw_readl(&imx_ccm->cbcmr); diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index f20bdebf3f..2012caf2e7 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -79,9 +79,15 @@ u32 __weak get_board_rev(void) void init_aips(void) { struct aipstz_regs *aips1, *aips2; +#ifdef CONFIG_MX6SX + struct aipstz_regs *aips3; +#endif aips1 = (struct aipstz_regs *)AIPS1_BASE_ADDR; aips2 = (struct aipstz_regs *)AIPS2_BASE_ADDR; +#ifdef CONFIG_MX6SX + aips3 = (struct aipstz_regs *)AIPS3_BASE_ADDR; +#endif /* * Set all MPROTx to be non-bufferable, trusted for R/W, @@ -107,6 +113,26 @@ void init_aips(void) writel(0x00000000, &aips2->opacr2); writel(0x00000000, &aips2->opacr3); writel(0x00000000, &aips2->opacr4); + +#ifdef CONFIG_MX6SX + /* + * Set all MPROTx to be non-bufferable, trusted for R/W, + * not forced to user-mode. + */ + writel(0x77777777, &aips3->mprot0); + writel(0x77777777, &aips3->mprot1); + + /* + * Set all OPACRx to be non-bufferable, not require + * supervisor privilege level for access,allow for + * write access and untrusted master access. + */ + writel(0x00000000, &aips3->opacr0); + writel(0x00000000, &aips3->opacr1); + writel(0x00000000, &aips3->opacr2); + writel(0x00000000, &aips3->opacr3); + writel(0x00000000, &aips3->opacr4); +#endif } static void clear_ldo_ramp(void) diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c index 5a09107c5a..7bb0e83a17 100644 --- a/arch/arm/imx-common/cpu.c +++ b/arch/arm/imx-common/cpu.c @@ -112,6 +112,8 @@ const char *get_imx_type(u32 imxtype) return "6SOLO"; /* Solo version of the mx6 */ case MXC_CPU_MX6SL: return "6SL"; /* Solo-Lite version of the mx6 */ + case MXC_CPU_MX6SX: + return "6SX"; /* SoloX version of the mx6 */ case MXC_CPU_MX51: return "51"; case MXC_CPU_MX53: diff --git a/arch/arm/include/asm/arch-imx/cpu.h b/arch/arm/include/asm/arch-imx/cpu.h index a35940e64f..a3cc96f39b 100644 --- a/arch/arm/include/asm/arch-imx/cpu.h +++ b/arch/arm/include/asm/arch-imx/cpu.h @@ -8,6 +8,7 @@ #define MXC_CPU_MX53 0x53 #define MXC_CPU_MX6SL 0x60 #define MXC_CPU_MX6DL 0x61 -#define MXC_CPU_MX6SOLO 0x62 +#define MXC_CPU_MX6SX 0x62 #define MXC_CPU_MX6Q 0x63 #define MXC_CPU_MX6D 0x64 +#define MXC_CPU_MX6SOLO 0x65 /* dummy ID */ diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h index 720207303b..0fcef69768 100644 --- a/arch/arm/include/asm/arch-mx6/crm_regs.h +++ b/arch/arm/include/asm/arch-mx6/crm_regs.h @@ -113,7 +113,11 @@ struct mxc_ccm_reg { #define MXC_CCM_CCR_WB_COUNT_MASK 0x7 #define MXC_CCM_CCR_WB_COUNT_OFFSET (1 << 16) #define MXC_CCM_CCR_COSC_EN (1 << 12) +#ifdef CONFIG_MX6SX +#define MXC_CCM_CCR_OSCNT_MASK 0x7F +#else #define MXC_CCM_CCR_OSCNT_MASK 0xFF +#endif #define MXC_CCM_CCR_OSCNT_OFFSET 0 /* Define the bits in register CCDR */ @@ -146,8 +150,10 @@ struct mxc_ccm_reg { #define MXC_CCM_CBCDR_PERIPH_CLK2_PODF_OFFSET 27 #define MXC_CCM_CBCDR_PERIPH2_CLK2_SEL (1 << 26) #define MXC_CCM_CBCDR_PERIPH_CLK_SEL (1 << 25) +#ifndef CONFIG_MX6SX #define MXC_CCM_CBCDR_MMDC_CH0_PODF_MASK (0x7 << 19) #define MXC_CCM_CBCDR_MMDC_CH0_PODF_OFFSET 19 +#endif #define MXC_CCM_CBCDR_AXI_PODF_MASK (0x7 << 16) #define MXC_CCM_CBCDR_AXI_PODF_OFFSET 16 #define MXC_CCM_CBCDR_AHB_PODF_MASK (0x7 << 10) @@ -173,28 +179,40 @@ struct mxc_ccm_reg { #define MXC_CCM_CBCMR_PRE_PERIPH2_CLK2_SEL (1 << 20) #define MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_MASK (0x3 << 18) #define MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_OFFSET 18 +#ifndef CONFIG_MX6SX #define MXC_CCM_CBCMR_GPU2D_CLK_SEL_MASK (0x3 << 16) #define MXC_CCM_CBCMR_GPU2D_CLK_SEL_OFFSET 16 #define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_MASK (0x3 << 14) #define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_OFFSET 14 +#endif #define MXC_CCM_CBCMR_PERIPH_CLK2_SEL_MASK (0x3 << 12) #define MXC_CCM_CBCMR_PERIPH_CLK2_SEL_OFFSET 12 +#ifndef CONFIG_MX6SX #define MXC_CCM_CBCMR_VDOAXI_CLK_SEL (1 << 11) +#endif #define MXC_CCM_CBCMR_PCIE_AXI_CLK_SEL (1 << 10) #define MXC_CCM_CBCMR_GPU3D_SHADER_CLK_SEL_MASK (0x3 << 8) #define MXC_CCM_CBCMR_GPU3D_SHADER_CLK_SEL_OFFSET 8 #define MXC_CCM_CBCMR_GPU3D_CORE_CLK_SEL_MASK (0x3 << 4) #define MXC_CCM_CBCMR_GPU3D_CORE_CLK_SEL_OFFSET 4 +#ifndef CONFIG_MX6SX #define MXC_CCM_CBCMR_GPU3D_AXI_CLK_SEL (1 << 1) #define MXC_CCM_CBCMR_GPU2D_AXI_CLK_SEL (1 << 0) +#endif /* Define the bits in register CSCMR1 */ #define MXC_CCM_CSCMR1_ACLK_EMI_SLOW_MASK (0x3 << 29) #define MXC_CCM_CSCMR1_ACLK_EMI_SLOW_OFFSET 29 +#ifdef CONFIG_MX6SX +#define MXC_CCM_CSCMR1_QSPI1_PODF_MASK (0x7 << 26) +#define MXC_CCM_CSCMR1_QSPI1_PODF_OFFSET 26 +#else #define MXC_CCM_CSCMR1_ACLK_EMI_MASK (0x3 << 27) #define MXC_CCM_CSCMR1_ACLK_EMI_OFFSET 27 +#endif #define MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_MASK (0x7 << 23) #define MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_OFFSET 23 +/* ACLK_EMI_PODF is LCFIF2_PODF on MX6SX */ #define MXC_CCM_CSCMR1_ACLK_EMI_PODF_MASK (0x7 << 20) #define MXC_CCM_CSCMR1_ACLK_EMI_PODF_OFFSET 20 #define MXC_CCM_CSCMR1_USDHC4_CLK_SEL (1 << 19) @@ -207,19 +225,38 @@ struct mxc_ccm_reg { #define MXC_CCM_CSCMR1_SSI2_CLK_SEL_OFFSET 12 #define MXC_CCM_CSCMR1_SSI1_CLK_SEL_MASK (0x3 << 10) #define MXC_CCM_CSCMR1_SSI1_CLK_SEL_OFFSET 10 +#ifdef CONFIG_MX6SX +#define MXC_CCM_CSCMR1_QSPI1_CLK_SEL_MASK (0x7 << 7) +#define MXC_CCM_CSCMR1_QSPI1_CLK_SEL_OFFSET 7 +#define MXC_CCM_CSCMR1_PER_CLK_SEL_MASK (1 << 6) +#define MXC_CCM_CSCMR1_PER_CLK_SEL_OFFSET 6 +#endif #define MXC_CCM_CSCMR1_PERCLK_PODF_MASK 0x3F /* Define the bits in register CSCMR2 */ +#ifdef CONFIG_MX6SX +#define MXC_CCM_CSCMR2_VID_CLK_SEL_MASK (0x7 << 21) +#define MXC_CCM_CSCMR2_VID_CLK_SEL_OFFSET 21 +#endif #define MXC_CCM_CSCMR2_ESAI_PRE_SEL_MASK (0x3 << 19) #define MXC_CCM_CSCMR2_ESAI_PRE_SEL_OFFSET 19 #define MXC_CCM_CSCMR2_LDB_DI1_IPU_DIV (1 << 11) #define MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV (1 << 10) +#ifdef CONFIG_MX6SX +#define MXC_CCM_CSCMR2_CAN_CLK_SEL_MASK (0x3 << 8) +#define MXC_CCM_CSCMR2_CAN_CLK_SEL_OFFSET 8 +#define MXC_CCM_CSCMR2_CAN_CLK_PODF_MASK (0x3F << 2) +#define MXC_CCM_CSCMR2_CAN_CLK_PODF_OFFSET 2 +#else #define MXC_CCM_CSCMR2_CAN_CLK_SEL_MASK (0x3F << 2) #define MXC_CCM_CSCMR2_CAN_CLK_SEL_OFFSET 2 +#endif /* Define the bits in register CSCDR1 */ +#ifndef CONFIG_MX6SX #define MXC_CCM_CSCDR1_VPU_AXI_PODF_MASK (0x7 << 25) #define MXC_CCM_CSCDR1_VPU_AXI_PODF_OFFSET 25 +#endif #define MXC_CCM_CSCDR1_USDHC4_PODF_MASK (0x7 << 22) #define MXC_CCM_CSCDR1_USDHC4_PODF_OFFSET 22 #define MXC_CCM_CSCDR1_USDHC3_PODF_MASK (0x7 << 19) @@ -228,21 +265,28 @@ struct mxc_ccm_reg { #define MXC_CCM_CSCDR1_USDHC2_PODF_OFFSET 16 #define MXC_CCM_CSCDR1_USDHC1_PODF_MASK (0x7 << 11) #define MXC_CCM_CSCDR1_USDHC1_PODF_OFFSET 11 +#ifndef CONFIG_MX6SX #define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_OFFSET 8 #define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK (0x7 << 8) #define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET 6 #define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK (0x3 << 6) +#endif #ifdef CONFIG_MX6SL #define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK 0x1F #define MXC_CCM_CSCDR1_UART_CLK_SEL (1 << 6) #else #define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK 0x3F +#ifdef CONFIG_MX6SX +#define MXC_CCM_CSCDR1_UART_CLK_SEL (1 << 6) +#endif #endif #define MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET 0 /* Define the bits in register CS1CDR */ #define MXC_CCM_CS1CDR_ESAI_CLK_PODF_MASK (0x3F << 25) #define MXC_CCM_CS1CDR_ESAI_CLK_PODF_OFFSET 25 +#define MXC_CCM_CS1CDR_SSI3_CLK_PRED_MASK (0x7 << 22) +#define MXC_CCM_CS1CDR_SSI3_CLK_PRED_OFFSET 22 #define MXC_CCM_CS1CDR_SSI3_CLK_PODF_MASK (0x3F << 16) #define MXC_CCM_CS1CDR_SSI3_CLK_PODF_OFFSET 16 #define MXC_CCM_CS1CDR_ESAI_CLK_PRED_MASK (0x3 << 9) @@ -253,6 +297,17 @@ struct mxc_ccm_reg { #define MXC_CCM_CS1CDR_SSI1_CLK_PODF_OFFSET 0 /* Define the bits in register CS2CDR */ +#ifdef CONFIG_MX6SX +#define MXC_CCM_CS2CDR_QSPI2_CLK_PODF_MASK (0x3F << 21) +#define MXC_CCM_CS2CDR_QSPI2_CLK_PODF_OFFSET 21 +#define MXC_CCM_CS2CDR_QSPI2_CLK_PODF(v) (((v) & 0x3f) << 21) +#define MXC_CCM_CS2CDR_QSPI2_CLK_PRED_MASK (0x7 << 18) +#define MXC_CCM_CS2CDR_QSPI2_CLK_PRED_OFFSET 18 +#define MXC_CCM_CS2CDR_QSPI2_CLK_PRED(v) (((v) & 0x7) << 18) +#define MXC_CCM_CS2CDR_QSPI2_CLK_SEL_MASK (0x7 << 15) +#define MXC_CCM_CS2CDR_QSPI2_CLK_SEL_OFFSET 15 +#define MXC_CCM_CS2CDR_QSPI2_CLK_SEL(v) (((v) & 0x7) << 15) +#else #define MXC_CCM_CS2CDR_ENFC_CLK_PODF_MASK (0x3F << 21) #define MXC_CCM_CS2CDR_ENFC_CLK_PODF_OFFSET 21 #define MXC_CCM_CS2CDR_ENFC_CLK_PODF(v) (((v) & 0x3f) << 21) @@ -262,6 +317,7 @@ struct mxc_ccm_reg { #define MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK (0x3 << 16) #define MXC_CCM_CS2CDR_ENFC_CLK_SEL_OFFSET 16 #define MXC_CCM_CS2CDR_ENFC_CLK_SEL(v) (((v) & 0x3) << 16) +#endif #define MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK (0x7 << 12) #define MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET 12 #define MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK (0x7 << 9) @@ -272,9 +328,11 @@ struct mxc_ccm_reg { #define MXC_CCM_CS2CDR_SSI2_CLK_PODF_OFFSET 0 /* Define the bits in register CDCDR */ +#ifndef CONFIG_MX6SX #define MXC_CCM_CDCDR_HSI_TX_PODF_MASK (0x7 << 29) #define MXC_CCM_CDCDR_HSI_TX_PODF_OFFSET 29 #define MXC_CCM_CDCDR_HSI_TX_CLK_SEL (1 << 28) +#endif #define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_MASK (0x7 << 25) #define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_OFFSET 25 #define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_MASK (0x7 << 19) @@ -289,6 +347,20 @@ struct mxc_ccm_reg { #define MXC_CCM_CDCDR_SPDIF1_CLK_SEL_OFFSET 7 /* Define the bits in register CHSCCDR */ +#ifdef CONFIG_MX6SX +#define MXC_CCM_CHSCCDR_ENET_PRE_CLK_SEL_MASK (0x7 << 15) +#define MXC_CCM_CHSCCDR_ENET_PRE_CLK_SEL_OFFSET 15 +#define MXC_CCM_CHSCCDR_ENET_PODF_MASK (0x7 << 12) +#define MXC_CCM_CHSCCDR_ENET_PODF_OFFSET 12 +#define MXC_CCM_CHSCCDR_ENET_CLK_SEL_MASK (0x7 << 9) +#define MXC_CCM_CHSCCDR_ENET_CLK_SEL_OFFSET 9 +#define MXC_CCM_CHSCCDR_M4_PRE_CLK_SEL_MASK (0x7 << 6) +#define MXC_CCM_CHSCCDR_M4_PRE_CLK_SEL_OFFSET 6 +#define MXC_CCM_CHSCCDR_M4_PODF_MASK (0x7 << 3) +#define MXC_CCM_CHSCCDR_M4_PODF_OFFSET 3 +#define MXC_CCM_CHSCCDR_M4_CLK_SEL_MASK (0x7) +#define MXC_CCM_CHSCCDR_M4_CLK_SEL_OFFSET 0 +#else #define MXC_CCM_CHSCCDR_IPU1_DI1_PRE_CLK_SEL_MASK (0x7 << 15) #define MXC_CCM_CHSCCDR_IPU1_DI1_PRE_CLK_SEL_OFFSET 15 #define MXC_CCM_CHSCCDR_IPU1_DI1_PODF_MASK (0x7 << 12) @@ -301,6 +373,7 @@ struct mxc_ccm_reg { #define MXC_CCM_CHSCCDR_IPU1_DI0_PODF_OFFSET 3 #define MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK (0x7) #define MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET 0 +#endif #define CHSCCDR_CLK_SEL_LDB_DI0 3 #define CHSCCDR_PODF_DIVIDE_BY_3 2 @@ -309,12 +382,14 @@ struct mxc_ccm_reg { /* Define the bits in register CSCDR2 */ #define MXC_CCM_CSCDR2_ECSPI_CLK_PODF_MASK (0x3F << 19) #define MXC_CCM_CSCDR2_ECSPI_CLK_PODF_OFFSET 19 +/* All IPU2_DI1 are LCDIF1 on MX6SX */ #define MXC_CCM_CHSCCDR_IPU2_DI1_PRE_CLK_SEL_MASK (0x7 << 15) #define MXC_CCM_CHSCCDR_IPU2_DI1_PRE_CLK_SEL_OFFSET 15 #define MXC_CCM_CHSCCDR_IPU2_DI1_PODF_MASK (0x7 << 12) #define MXC_CCM_CHSCCDR_IPU2_DI1_PODF_OFFSET 12 #define MXC_CCM_CHSCCDR_IPU2_DI1_CLK_SEL_MASK (0x7 << 9) #define MXC_CCM_CHSCCDR_IPU2_DI1_CLK_SEL_OFFSET 9 +/* All IPU2_DI0 are LCDIF2 on MX6SX */ #define MXC_CCM_CHSCCDR_IPU2_DI0_PRE_CLK_SEL_MASK (0x7 << 6) #define MXC_CCM_CHSCCDR_IPU2_DI0_PRE_CLK_SEL_OFFSET 6 #define MXC_CCM_CHSCCDR_IPU2_DI0_PODF_MASK (0x7 << 3) @@ -335,7 +410,9 @@ struct mxc_ccm_reg { /* Define the bits in register CDHIPR */ #define MXC_CCM_CDHIPR_ARM_PODF_BUSY (1 << 16) #define MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY (1 << 5) +#ifndef CONFIG_MX6SX #define MXC_CCM_CDHIPR_MMDC_CH0_PODF_BUSY (1 << 4) +#endif #define MXC_CCM_CDHIPR_PERIPH2_CLK_SEL_BUSY (1 << 3) #define MXC_CCM_CDHIPR_MMDC_CH1_PODF_BUSY (1 << 2) #define MXC_CCM_CDHIPR_AHB_PODF_BUSY (1 << 1) @@ -344,13 +421,17 @@ struct mxc_ccm_reg { /* Define the bits in register CLPCR */ #define MXC_CCM_CLPCR_MASK_L2CC_IDLE (1 << 27) #define MXC_CCM_CLPCR_MASK_SCU_IDLE (1 << 26) +#ifndef CONFIG_MX6SX #define MXC_CCM_CLPCR_MASK_CORE3_WFI (1 << 25) #define MXC_CCM_CLPCR_MASK_CORE2_WFI (1 << 24) #define MXC_CCM_CLPCR_MASK_CORE1_WFI (1 << 23) +#endif #define MXC_CCM_CLPCR_MASK_CORE0_WFI (1 << 22) #define MXC_CCM_CLPCR_BYP_MMDC_CH1_LPM_HS (1 << 21) +#ifndef CONFIG_MX6SX #define MXC_CCM_CLPCR_BYP_MMDC_CH0_LPM_HS (1 << 19) #define MXC_CCM_CLPCR_WB_CORE_AT_LPM (1 << 17) +#endif #define MXC_CCM_CLPCR_WB_PER_AT_LPM (1 << 17) #define MXC_CCM_CLPCR_COSC_PWRDOWN (1 << 11) #define MXC_CCM_CLPCR_STBY_COUNT_MASK (0x3 << 9) @@ -359,15 +440,19 @@ struct mxc_ccm_reg { #define MXC_CCM_CLPCR_DIS_REF_OSC (1 << 7) #define MXC_CCM_CLPCR_SBYOS (1 << 6) #define MXC_CCM_CLPCR_ARM_CLK_DIS_ON_LPM (1 << 5) +#ifndef CONFIG_MX6SX #define MXC_CCM_CLPCR_LPSR_CLK_SEL_MASK (0x3 << 3) #define MXC_CCM_CLPCR_LPSR_CLK_SEL_OFFSET 3 #define MXC_CCM_CLPCR_BYPASS_PMIC_VFUNC_READY (1 << 2) +#endif #define MXC_CCM_CLPCR_LPM_MASK 0x3 #define MXC_CCM_CLPCR_LPM_OFFSET 0 /* Define the bits in register CISR */ #define MXC_CCM_CISR_ARM_PODF_LOADED (1 << 26) +#ifndef CONFIG_MX6SX #define MXC_CCM_CISR_MMDC_CH0_PODF_LOADED (1 << 23) +#endif #define MXC_CCM_CISR_PERIPH_CLK_SEL_LOADED (1 << 22) #define MXC_CCM_CISR_MMDC_CH1_PODF_LOADED (1 << 21) #define MXC_CCM_CISR_AHB_PODF_LOADED (1 << 20) @@ -378,7 +463,9 @@ struct mxc_ccm_reg { /* Define the bits in register CIMR */ #define MXC_CCM_CIMR_MASK_ARM_PODF_LOADED (1 << 26) +#ifndef CONFIG_MX6SX #define MXC_CCM_CIMR_MASK_MMDC_CH0_PODF_LOADED (1 << 23) +#endif #define MXC_CCM_CIMR_MASK_PERIPH_CLK_SEL_LOADED (1 << 22) #define MXC_CCM_CIMR_MASK_MMDC_CH1_PODF_LOADED (1 << 21) #define MXC_CCM_CIMR_MASK_AHB_PODF_LOADED (1 << 20) @@ -393,6 +480,7 @@ struct mxc_ccm_reg { #define MXC_CCM_CCOSR_CKO2_DIV_OFFSET 21 #define MXC_CCM_CCOSR_CKO2_SEL_OFFSET 16 #define MXC_CCM_CCOSR_CKO2_SEL_MASK (0x1F << 16) +#define MXC_CCM_CCOSR_CLK_OUT_SEL (0x1 << 8) #define MXC_CCM_CCOSR_CKOL_EN (0x1 << 7) #define MXC_CCM_CCOSR_CKOL_DIV_MASK (0x7 << 4) #define MXC_CCM_CCOSR_CKOL_DIV_OFFSET 4 @@ -400,6 +488,7 @@ struct mxc_ccm_reg { #define MXC_CCM_CCOSR_CKOL_SEL_OFFSET 0 /* Define the bits in registers CGPR */ +#define MXC_CCM_CGPR_FAST_PLL_EN (1 << 16) #define MXC_CCM_CGPR_EFUSE_PROG_SUPPLY_GATE (1 << 4) #define MXC_CCM_CGPR_MMDC_EXT_CLK_DIS (1 << 2) #define MXC_CCM_CGPR_PMIC_DELAY_SCALER 1 @@ -435,8 +524,13 @@ struct mxc_ccm_reg { #define MXC_CCM_CCGR0_DCIC1_MASK (3 << MXC_CCM_CCGR0_DCIC1_OFFSET) #define MXC_CCM_CCGR0_DCIC2_OFFSET 26 #define MXC_CCM_CCGR0_DCIC2_MASK (3 << MXC_CCM_CCGR0_DCIC2_OFFSET) +#ifdef CONFIG_MX6SX +#define MXC_CCM_CCGR0_AIPS_TZ3_OFFSET 30 +#define MXC_CCM_CCGR0_AIPS_TZ3_MASK (3 << MXC_CCM_CCGR0_AIPS_TZ3_OFFSET) +#else #define MXC_CCM_CCGR0_DTCP_OFFSET 28 #define MXC_CCM_CCGR0_DTCP_MASK (3 << MXC_CCM_CCGR0_DTCP_OFFSET) +#endif #define MXC_CCM_CCGR1_ECSPI1S_OFFSET 0 #define MXC_CCM_CCGR1_ECSPI1S_MASK (3 << MXC_CCM_CCGR1_ECSPI1S_OFFSET) @@ -448,27 +542,48 @@ struct mxc_ccm_reg { #define MXC_CCM_CCGR1_ECSPI4S_MASK (3 << MXC_CCM_CCGR1_ECSPI4S_OFFSET) #define MXC_CCM_CCGR1_ECSPI5S_OFFSET 8 #define MXC_CCM_CCGR1_ECSPI5S_MASK (3 << MXC_CCM_CCGR1_ECSPI5S_OFFSET) +#ifndef CONFIG_MX6SX #define MXC_CCM_CCGR1_ENET_CLK_ENABLE_OFFSET 10 #define MXC_CCM_CCGR1_ENET_CLK_ENABLE_MASK (3 << MXC_CCM_CCGR1_ENET_CLK_ENABLE_OFFSET) +#endif #define MXC_CCM_CCGR1_EPIT1S_OFFSET 12 #define MXC_CCM_CCGR1_EPIT1S_MASK (3 << MXC_CCM_CCGR1_EPIT1S_OFFSET) #define MXC_CCM_CCGR1_EPIT2S_OFFSET 14 #define MXC_CCM_CCGR1_EPIT2S_MASK (3 << MXC_CCM_CCGR1_EPIT2S_OFFSET) #define MXC_CCM_CCGR1_ESAIS_OFFSET 16 #define MXC_CCM_CCGR1_ESAIS_MASK (3 << MXC_CCM_CCGR1_ESAIS_OFFSET) +#ifdef CONFIG_MX6SX +#define MXC_CCM_CCGR1_WAKEUP_OFFSET 18 +#define MXC_CCM_CCGR1_WAKEUP_MASK (3 << MXC_CCM_CCGR1_WAKEUP_OFFSET) +#endif #define MXC_CCM_CCGR1_GPT_BUS_OFFSET 20 #define MXC_CCM_CCGR1_GPT_BUS_MASK (3 << MXC_CCM_CCGR1_GPT_BUS_OFFSET) #define MXC_CCM_CCGR1_GPT_SERIAL_OFFSET 22 #define MXC_CCM_CCGR1_GPT_SERIAL_MASK (3 << MXC_CCM_CCGR1_GPT_SERIAL_OFFSET) +#ifndef CONFIG_MX6SX #define MXC_CCM_CCGR1_GPU2D_OFFSET 24 #define MXC_CCM_CCGR1_GPU2D_MASK (3 << MXC_CCM_CCGR1_GPU2D_OFFSET) +#endif #define MXC_CCM_CCGR1_GPU3D_OFFSET 26 #define MXC_CCM_CCGR1_GPU3D_MASK (3 << MXC_CCM_CCGR1_GPU3D_OFFSET) +#ifdef CONFIG_MX6SX +#define MXC_CCM_CCGR1_OCRAM_S_OFFSET 28 +#define MXC_CCM_CCGR1_OCRAM_S_MASK (3 << MXC_CCM_CCGR1_OCRAM_S_OFFSET) +#define MXC_CCM_CCGR1_CANFD_OFFSET 30 +#define MXC_CCM_CCGR1_CANFD_MASK (3 << MXC_CCM_CCGR1_CANFD_OFFSET) +#endif +#ifndef CONFIG_MX6SX #define MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_OFFSET 0 #define MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_MASK (3 << MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_OFFSET) +#else +#define MXC_CCM_CCGR2_CSI_OFFSET 2 +#define MXC_CCM_CCGR2_CSI_MASK (3 << MXC_CCM_CCGR2_CSI_OFFSET) +#endif +#ifndef CONFIG_MX6SX #define MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_OFFSET 4 #define MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_MASK (3 << MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_OFFSET) +#endif #define MXC_CCM_CCGR2_I2C1_SERIAL_OFFSET 6 #define MXC_CCM_CCGR2_I2C1_SERIAL_MASK (3 << MXC_CCM_CCGR2_I2C1_SERIAL_OFFSET) #define MXC_CCM_CCGR2_I2C2_SERIAL_OFFSET 8 @@ -487,17 +602,33 @@ struct mxc_ccm_reg { #define MXC_CCM_CCGR2_IPMUX3_MASK (3 << MXC_CCM_CCGR2_IPMUX3_OFFSET) #define MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC1_IPGS_OFFSET 22 #define MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC1_IPGS_MASK (3 << MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC1_IPGS_OFFSET) +#ifdef CONFIG_MX6SX +#define MXC_CCM_CCGR2_LCD_OFFSET 28 +#define MXC_CCM_CCGR2_LCD_MASK (3 << MXC_CCM_CCGR2_LCD_OFFSET) +#define MXC_CCM_CCGR2_PXP_OFFSET 30 +#define MXC_CCM_CCGR2_PXP_MASK (3 << MXC_CCM_CCGR2_PXP_OFFSET) +#else #define MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC2_IPG_OFFSET 24 #define MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC2_IPG_MASK (3 << MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC2_IPG_OFFSET) #define MXC_CCM_CCGR2_IPSYNC_VDOA_IPG_MASTER_CLK_OFFSET 26 #define MXC_CCM_CCGR2_IPSYNC_VDOA_IPG_MASTER_CLK_MASK (3 << MXC_CCM_CCGR2_IPSYNC_VDOA_IPG_MASTER_CLK_OFFSET) +#endif +#ifdef CONFIG_MX6SX +#define MXC_CCM_CCGR3_M4_OFFSET 2 +#define MXC_CCM_CCGR3_M4_MASK (3 << MXC_CCM_CCGR3_M4_OFFSET) +#define MXC_CCM_CCGR3_ENET_OFFSET 4 +#define MXC_CCM_CCGR3_ENET_MASK (3 << MXC_CCM_CCGR3_ENET_OFFSET) +#define MXC_CCM_CCGR3_QSPI_OFFSET 14 +#define MXC_CCM_CCGR3_QSPI_MASK (3 << MXC_CCM_CCGR3_QSPI_OFFSET) +#else #define MXC_CCM_CCGR3_IPU1_IPU_OFFSET 0 #define MXC_CCM_CCGR3_IPU1_IPU_MASK (3 << MXC_CCM_CCGR3_IPU1_IPU_OFFSET) #define MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET 2 #define MXC_CCM_CCGR3_IPU1_IPU_DI0_MASK (3 << MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET) #define MXC_CCM_CCGR3_IPU1_IPU_DI1_OFFSET 4 #define MXC_CCM_CCGR3_IPU1_IPU_DI1_MASK (3 << MXC_CCM_CCGR3_IPU1_IPU_DI1_OFFSET) +#endif #define MXC_CCM_CCGR3_IPU2_IPU_OFFSET 6 #define MXC_CCM_CCGR3_IPU2_IPU_MASK (3 << MXC_CCM_CCGR3_IPU2_IPU_OFFSET) #define MXC_CCM_CCGR3_IPU2_IPU_DI0_OFFSET 8 @@ -506,29 +637,43 @@ struct mxc_ccm_reg { #define MXC_CCM_CCGR3_IPU2_IPU_DI1_MASK (3 << MXC_CCM_CCGR3_IPU2_IPU_DI1_OFFSET) #define MXC_CCM_CCGR3_LDB_DI0_OFFSET 12 #define MXC_CCM_CCGR3_LDB_DI0_MASK (3 << MXC_CCM_CCGR3_LDB_DI0_OFFSET) +#ifdef CONFIG_MX6SX +#define MXC_CCM_CCGR3_QSPI1_OFFSET 14 +#define MXC_CCM_CCGR3_QSPI1_MASK (3 << MXC_CCM_CCGR3_QSPI1_OFFSET) +#else #define MXC_CCM_CCGR3_LDB_DI1_OFFSET 14 #define MXC_CCM_CCGR3_LDB_DI1_MASK (3 << MXC_CCM_CCGR3_LDB_DI1_OFFSET) #define MXC_CCM_CCGR3_MIPI_CORE_CFG_OFFSET 16 #define MXC_CCM_CCGR3_MIPI_CORE_CFG_MASK (3 << MXC_CCM_CCGR3_MIPI_CORE_CFG_OFFSET) +#endif #define MXC_CCM_CCGR3_MLB_OFFSET 18 #define MXC_CCM_CCGR3_MLB_MASK (3 << MXC_CCM_CCGR3_MLB_OFFSET) #define MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P0_OFFSET 20 #define MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P0_MASK (3 << MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P0_OFFSET) +#ifndef CONFIG_MX6SX #define MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P1_OFFSET 22 #define MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P1_MASK (3 << MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P1_OFFSET) +#endif #define MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P0_OFFSET 24 #define MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P0_MASK (3 << MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P0_OFFSET) #define MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P1_OFFSET 26 #define MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P1_MASK (3 << MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P1_OFFSET) #define MXC_CCM_CCGR3_OCRAM_OFFSET 28 #define MXC_CCM_CCGR3_OCRAM_MASK (3 << MXC_CCM_CCGR3_OCRAM_OFFSET) +#ifndef CONFIG_MX6SX #define MXC_CCM_CCGR3_OPENVGAXICLK_OFFSET 30 #define MXC_CCM_CCGR3_OPENVGAXICLK_MASK (3 << MXC_CCM_CCGR3_OPENVGAXICLK_OFFSET) +#endif #define MXC_CCM_CCGR4_PCIE_OFFSET 0 #define MXC_CCM_CCGR4_PCIE_MASK (3 << MXC_CCM_CCGR4_PCIE_OFFSET) +#ifdef CONFIG_MX6SX +#define MXC_CCM_CCGR4_QSPI2_ENFC_OFFSET 10 +#define MXC_CCM_CCGR4_QSPI2_ENFC_MASK (3 << MXC_CCM_CCGR4_QSPI2_ENFC_OFFSET) +#else #define MXC_CCM_CCGR4_PL301_MX6QFAST1_S133_OFFSET 8 #define MXC_CCM_CCGR4_PL301_MX6QFAST1_S133_MASK (3 << MXC_CCM_CCGR4_PL301_MX6QFAST1_S133_OFFSET) +#endif #define MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_OFFSET 12 #define MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK (3 << MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_OFFSET) #define MXC_CCM_CCGR4_PL301_MX6QPER2_MAINCLK_ENABLE_OFFSET 14 @@ -552,8 +697,10 @@ struct mxc_ccm_reg { #define MXC_CCM_CCGR5_ROM_OFFSET 0 #define MXC_CCM_CCGR5_ROM_MASK (3 << MXC_CCM_CCGR5_ROM_OFFSET) +#ifndef CONFIG_MX6SX #define MXC_CCM_CCGR5_SATA_OFFSET 4 #define MXC_CCM_CCGR5_SATA_MASK (3 << MXC_CCM_CCGR5_SATA_OFFSET) +#endif #define MXC_CCM_CCGR5_SDMA_OFFSET 6 #define MXC_CCM_CCGR5_SDMA_MASK (3 << MXC_CCM_CCGR5_SDMA_OFFSET) #define MXC_CCM_CCGR5_SPBA_OFFSET 12 @@ -570,6 +717,12 @@ struct mxc_ccm_reg { #define MXC_CCM_CCGR5_UART_MASK (3 << MXC_CCM_CCGR5_UART_OFFSET) #define MXC_CCM_CCGR5_UART_SERIAL_OFFSET 26 #define MXC_CCM_CCGR5_UART_SERIAL_MASK (3 << MXC_CCM_CCGR5_UART_SERIAL_OFFSET) +#ifdef CONFIG_MX6SX +#define MXC_CCM_CCGR5_SAI1_OFFSET 20 +#define MXC_CCM_CCGR5_SAI1_MASK (3 << MXC_CCM_CCGR5_SAI1_OFFSET) +#define MXC_CCM_CCGR5_SAI2_OFFSET 30 +#define MXC_CCM_CCGR5_SAI2_MASK (3 << MXC_CCM_CCGR5_SAI2_OFFSET) +#endif #define MXC_CCM_CCGR6_USBOH3_OFFSET 0 #define MXC_CCM_CCGR6_USBOH3_MASK (3 << MXC_CCM_CCGR6_USBOH3_OFFSET) @@ -583,8 +736,25 @@ struct mxc_ccm_reg { #define MXC_CCM_CCGR6_USDHC4_MASK (3 << MXC_CCM_CCGR6_USDHC4_OFFSET) #define MXC_CCM_CCGR6_EMI_SLOW_OFFSET 10 #define MXC_CCM_CCGR6_EMI_SLOW_MASK (3 << MXC_CCM_CCGR6_EMI_SLOW_OFFSET) +#ifdef CONFIG_MX6SX +#define MXC_CCM_CCGR6_PWM8_OFFSET 16 +#define MXC_CCM_CCGR6_PWM8_MASK (3 << MXC_CCM_CCGR6_PWM8_OFFSET) +#define MXC_CCM_CCGR6_VADC_OFFSET 20 +#define MXC_CCM_CCGR6_VADC_MASK (3 << MXC_CCM_CCGR6_VADC_OFFSET) +#define MXC_CCM_CCGR6_GIS_OFFSET 22 +#define MXC_CCM_CCGR6_GIS_MASK (3 << MXC_CCM_CCGR6_GIS_OFFSET) +#define MXC_CCM_CCGR6_I2C4_OFFSET 24 +#define MXC_CCM_CCGR6_I2C4_MASK (3 << MXC_CCM_CCGR6_I2C4_OFFSET) +#define MXC_CCM_CCGR6_PWM5_OFFSET 26 +#define MXC_CCM_CCGR6_PWM5_MASK (3 << MXC_CCM_CCGR6_PWM5_OFFSET) +#define MXC_CCM_CCGR6_PWM6_OFFSET 28 +#define MXC_CCM_CCGR6_PWM6_MASK (3 << MXC_CCM_CCGR6_PWM6_OFFSET) +#define MXC_CCM_CCGR6_PWM7_OFFSET 30 +#define MXC_CCM_CCGR6_PWM7_MASK (3 << MXC_CCM_CCGR6_PWM7_OFFSET) +#else #define MXC_CCM_CCGR6_VDOAXICLK_OFFSET 12 #define MXC_CCM_CCGR6_VDOAXICLK_MASK (3 << MXC_CCM_CCGR6_VDOAXICLK_OFFSET) +#endif #define BM_ANADIG_PLL_SYS_LOCK 0x80000000 #define BP_ANADIG_PLL_SYS_RSVD0 20 diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h index a69a7530c3..df87123ad3 100644 --- a/arch/arm/include/asm/arch-mx6/imx-regs.h +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h @@ -19,6 +19,19 @@ #define GPU_2D_ARB_END_ADDR 0x02203FFF #define OPENVG_ARB_BASE_ADDR 0x02204000 #define OPENVG_ARB_END_ADDR 0x02207FFF +#elif CONFIG_MX6SX +#define CAAM_ARB_BASE_ADDR 0x00100000 +#define CAAM_ARB_END_ADDR 0x00107FFF +#define GPU_ARB_BASE_ADDR 0x01800000 +#define GPU_ARB_END_ADDR 0x01803FFF +#define APBH_DMA_ARB_BASE_ADDR 0x01804000 +#define APBH_DMA_ARB_END_ADDR 0x0180BFFF +#define M4_BOOTROM_BASE_ADDR 0x007F8000 + +#define MXS_APBH_BASE APBH_DMA_ARB_BASE_ADDR +#define MXS_GPMI_BASE (APBH_DMA_ARB_BASE_ADDR + 0x02000) +#define MXS_BCH_BASE (APBH_DMA_ARB_BASE_ADDR + 0x04000) + #else #define CAAM_ARB_BASE_ADDR 0x00100000 #define CAAM_ARB_END_ADDR 0x00103FFF @@ -39,14 +52,27 @@ #define MXS_BCH_BASE (APBH_DMA_ARB_BASE_ADDR + 0x04000) /* GPV - PL301 configuration ports */ -#ifdef CONFIG_MX6SL +#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX)) #define GPV2_BASE_ADDR 0x00D00000 #else #define GPV2_BASE_ADDR 0x00200000 #endif +#ifdef CONFIG_MX6SX +#define GPV3_BASE_ADDR 0x00E00000 +#define GPV4_BASE_ADDR 0x00F00000 +#define GPV5_BASE_ADDR 0x01000000 +#define GPV6_BASE_ADDR 0x01100000 +#define PCIE_ARB_BASE_ADDR 0x08000000 +#define PCIE_ARB_END_ADDR 0x08FFFFFF + +#else #define GPV3_BASE_ADDR 0x00300000 #define GPV4_BASE_ADDR 0x00800000 +#define PCIE_ARB_BASE_ADDR 0x01000000 +#define PCIE_ARB_END_ADDR 0x01FFFFFF +#endif + #define IRAM_BASE_ADDR 0x00900000 #define SCU_BASE_ADDR 0x00A00000 #define IC_INTERFACES_BASE_ADDR 0x00A00100 @@ -56,13 +82,21 @@ #define L2_PL310_BASE 0x00A02000 #define GPV0_BASE_ADDR 0x00B00000 #define GPV1_BASE_ADDR 0x00C00000 -#define PCIE_ARB_BASE_ADDR 0x01000000 -#define PCIE_ARB_END_ADDR 0x01FFFFFF #define AIPS1_ARB_BASE_ADDR 0x02000000 #define AIPS1_ARB_END_ADDR 0x020FFFFF #define AIPS2_ARB_BASE_ADDR 0x02100000 #define AIPS2_ARB_END_ADDR 0x021FFFFF +#ifdef CONFIG_MX6SX +#define AIPS3_BASE_ADDR 0x02200000 +#define AIPS3_END_ADDR 0x022FFFFF +#define WEIM_ARB_BASE_ADDR 0x50000000 +#define WEIM_ARB_END_ADDR 0x57FFFFFF +#define QSPI1_ARB_BASE_ADDR 0x60000000 +#define QSPI1_ARB_END_ADDR 0x6FFFFFFF +#define QSPI2_ARB_BASE_ADDR 0x70000000 +#define QSPI2_ARB_END_ADDR 0x7FFFFFFF +#else #define SATA_ARB_BASE_ADDR 0x02200000 #define SATA_ARB_END_ADDR 0x02203FFF #define OPENVG_ARB_BASE_ADDR 0x02204000 @@ -75,8 +109,9 @@ #define IPU2_ARB_END_ADDR 0x02BFFFFF #define WEIM_ARB_BASE_ADDR 0x08000000 #define WEIM_ARB_END_ADDR 0x0FFFFFFF +#endif -#ifdef CONFIG_MX6SL +#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX)) #define MMDC0_ARB_BASE_ADDR 0x80000000 #define MMDC0_ARB_END_ADDR 0xFFFFFFFF #define MMDC1_ARB_BASE_ADDR 0xC0000000 @@ -88,8 +123,10 @@ #define MMDC1_ARB_END_ADDR 0xFFFFFFFF #endif +#ifndef CONFIG_MX6SX #define IPU_SOC_BASE_ADDR IPU1_ARB_BASE_ADDR #define IPU_SOC_OFFSET 0x00200000 +#endif /* Defines for Blocks connected via AIPS (SkyBlue) */ #define ATZ1_BASE_ADDR AIPS1_ARB_BASE_ADDR @@ -112,7 +149,9 @@ #define UART3_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x34000) #define UART4_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x38000) #else +#ifndef CONFIG_MX6SX #define ECSPI5_BASE_ADDR (ATZ1_BASE_ADDR + 0x18000) +#endif #define UART1_BASE (ATZ1_BASE_ADDR + 0x20000) #define ESAI1_BASE_ADDR (ATZ1_BASE_ADDR + 0x24000) #define SSI1_BASE_ADDR (ATZ1_BASE_ADDR + 0x28000) @@ -121,8 +160,10 @@ #define ASRC_BASE_ADDR (ATZ1_BASE_ADDR + 0x34000) #endif +#ifndef CONFIG_MX6SX #define SPBA_BASE_ADDR (ATZ1_BASE_ADDR + 0x3C000) #define VPU_BASE_ADDR (ATZ1_BASE_ADDR + 0x40000) +#endif #define AIPS1_ON_BASE_ADDR (ATZ1_BASE_ADDR + 0x7C000) #define AIPS1_OFF_BASE_ADDR (ATZ1_BASE_ADDR + 0x80000) @@ -157,6 +198,13 @@ #define CSI_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x64000) #define SIPIX_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x68000) #define SDMA_PORT_HOST_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x6C000) +#elif CONFIG_MX6SX +#define CANFD1_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x68000) +#define SDMA_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x6C000) +#define CANFD2_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x70000) +#define SEMAPHORE1_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x74000) +#define SEMAPHORE2_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x78000) +#define RDC_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x7C000) #else #define DCIC1_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x64000) #define DCIC2_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x68000) @@ -193,6 +241,8 @@ #define MMDC_P0_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x30000) #ifdef CONFIG_MX6SL #define RNGB_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x34000) +#elif CONFIG_MX6SX +#define ENET2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x34000) #else #define MMDC_P1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x34000) #endif @@ -202,13 +252,28 @@ #define CSU_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x40000) #define IP2APB_PERFMON1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x44000) #define IP2APB_PERFMON2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x48000) +#ifdef CONFIG_MX6SX +#define DEBUG_MONITOR_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x4C000) +#else #define IP2APB_PERFMON3_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x4C000) +#endif #define IP2APB_TZASC1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x50000) +#ifdef CONFIG_MX6SX +#define SAI1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x54000) +#else #define IP2APB_TZASC2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x54000) +#endif #define AUDMUX_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x58000) +#define AUDMUX_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x58000) +#ifdef CONFIG_MX6SX +#define SAI2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x5C000) +#define QSPI1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x60000) +#define QSPI2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x64000) +#else #define MIPI_CSI2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x5C000) #define MIPI_DSI_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x60000) #define VDOA_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x64000) +#endif #define UART2_BASE (AIPS2_OFF_BASE_ADDR + 0x68000) #define UART3_BASE (AIPS2_OFF_BASE_ADDR + 0x6C000) #define UART4_BASE (AIPS2_OFF_BASE_ADDR + 0x70000) @@ -216,10 +281,42 @@ #define IP2APB_USBPHY1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x78000) #define IP2APB_USBPHY2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x7C000) +#ifdef CONFIG_MX6SX +#define GIS_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x04000) +#define DCIC1_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x0C000) +#define DCIC2_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x10000) +#define CSI1_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x14000) +#define PXP_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x18000) +#define CSI2_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x1C000) +#define LCDIF1_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x20000) +#define LCDIF2_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x24000) +#define VADC_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x28000) +#define VDEC_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x2C000) +#define SPBA_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x3C000) +#define AIPS3_CONFIG_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x7C000) +#define ADC1_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x80000) +#define ADC2_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x84000) +#define WDOG3_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x88000) +#define ECSPI5_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x8C000) +#define HS_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x90000) +#define MU_MCU_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x94000) +#define CANFD_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x98000) +#define MU_DSP_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x9C000) +#define UART6_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0xA0000) +#define PWM5_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0xA4000) +#define PWM6_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0xA8000) +#define PWM7_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0xAC000) +#define PWM8_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0xB0000) +#endif + #define CHIP_REV_1_0 0x10 #define CHIP_REV_1_2 0x12 #define CHIP_REV_1_5 0x15 +#ifndef CONFIG_MX6SX #define IRAM_SIZE 0x00040000 +#else +#define IRAM_SIZE 0x00020000 +#endif #define FEC_QUIRK_ENET_MAC #if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) @@ -473,6 +570,22 @@ struct fuse_bank0_regs { u32 rsvd7[4]; }; +#ifdef CONFIG_MX6SX +struct fuse_bank4_regs { + u32 sjc_resp_low; + u32 rsvd0[3]; + u32 sjc_resp_high; + u32 rsvd1[3]; + u32 mac_addr_low; + u32 rsvd2[3]; + u32 mac_addr_high; + u32 rsvd3[3]; + u32 mac_addr2; + u32 rsvd4[7]; + u32 gp1; + u32 rsvd5[7]; +}; +#else struct fuse_bank4_regs { u32 sjc_resp_low; u32 rsvd0[3]; @@ -487,6 +600,7 @@ struct fuse_bank4_regs { u32 gp2; u32 rsvd5[3]; }; +#endif struct aipstz_regs { u32 mprot0; diff --git a/arch/arm/include/asm/arch-mx6/mx6-ddr.h b/arch/arm/include/asm/arch-mx6/mx6-ddr.h index d544d2e708..5ebabfa271 100644 --- a/arch/arm/include/asm/arch-mx6/mx6-ddr.h +++ b/arch/arm/include/asm/arch-mx6/mx6-ddr.h @@ -13,7 +13,11 @@ #if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S) #include "mx6dl-ddr.h" #else +#ifdef CONFIG_MX6SX +#include "mx6sx-ddr.h" +#else #error "Please select cpu" +#endif /* CONFIG_MX6SX */ #endif /* CONFIG_MX6DL or CONFIG_MX6S */ #endif /* CONFIG_MX6Q */ #else diff --git a/arch/arm/include/asm/arch-mx6/mx6sx-ddr.h b/arch/arm/include/asm/arch-mx6/mx6sx-ddr.h new file mode 100644 index 0000000000..2cc94aa4c7 --- /dev/null +++ b/arch/arm/include/asm/arch-mx6/mx6sx-ddr.h @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARCH_MX6SX_DDR_H__ +#define __ASM_ARCH_MX6SX_DDR_H__ + +#ifndef CONFIG_MX6SX +#error "wrong CPU" +#endif + +#define MX6_IOM_DRAM_DQM0 0x020e02ec +#define MX6_IOM_DRAM_DQM1 0x020e02f0 +#define MX6_IOM_DRAM_DQM2 0x020e02f4 +#define MX6_IOM_DRAM_DQM3 0x020e02f8 + +#define MX6_IOM_DRAM_RAS 0x020e02fc +#define MX6_IOM_DRAM_CAS 0x020e0300 +#define MX6_IOM_DRAM_SDODT0 0x020e0310 +#define MX6_IOM_DRAM_SDODT1 0x020e0314 +#define MX6_IOM_DRAM_SDBA2 0x020e0320 +#define MX6_IOM_DRAM_SDCKE0 0x020e0324 +#define MX6_IOM_DRAM_SDCKE1 0x020e0328 +#define MX6_IOM_DRAM_SDCLK_0 0x020e032c +#define MX6_IOM_DRAM_RESET 0x020e0340 + +#define MX6_IOM_DRAM_SDQS0 0x020e0330 +#define MX6_IOM_DRAM_SDQS1 0x020e0334 +#define MX6_IOM_DRAM_SDQS2 0x020e0338 +#define MX6_IOM_DRAM_SDQS3 0x020e033c + +#define MX6_IOM_GRP_ADDDS 0x020e05f4 +#define MX6_IOM_DDRMODE_CTL 0x020e05f8 +#define MX6_IOM_GRP_DDRPKE 0x020e05fc +#define MX6_IOM_GRP_DDRMODE 0x020e0608 +#define MX6_IOM_GRP_B0DS 0x020e060c +#define MX6_IOM_GRP_B1DS 0x020e0610 +#define MX6_IOM_GRP_CTLDS 0x020e0614 +#define MX6_IOM_GRP_DDR_TYPE 0x020e0618 +#define MX6_IOM_GRP_B2DS 0x020e061c +#define MX6_IOM_GRP_B3DS 0x020e0620 + +#endif /*__ASM_ARCH_MX6SX_DDR_H__ */ From f5860404514aed743b6d6ca61b3b377ab751e2c6 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 24 Jun 2014 17:40:59 -0300 Subject: [PATCH 02/47] mx6sx: Add pin definitions Add the pin definitions for mx6sx. Signed-off-by: Fabio Estevam --- arch/arm/include/asm/arch-mx6/mx6-pins.h | 2 + arch/arm/include/asm/arch-mx6/mx6sx_pins.h | 1675 ++++++++++++++++++++ 2 files changed, 1677 insertions(+) create mode 100644 arch/arm/include/asm/arch-mx6/mx6sx_pins.h diff --git a/arch/arm/include/asm/arch-mx6/mx6-pins.h b/arch/arm/include/asm/arch-mx6/mx6-pins.h index dcd7f8f327..534f780be8 100644 --- a/arch/arm/include/asm/arch-mx6/mx6-pins.h +++ b/arch/arm/include/asm/arch-mx6/mx6-pins.h @@ -35,6 +35,8 @@ enum { }; #elif defined(CONFIG_MX6SL) #include "mx6sl_pins.h" +#elif defined(CONFIG_MX6SX) +#include "mx6sx_pins.h" #else #error "Please select cpu" #endif /* CONFIG_MX6Q */ diff --git a/arch/arm/include/asm/arch-mx6/mx6sx_pins.h b/arch/arm/include/asm/arch-mx6/mx6sx_pins.h new file mode 100644 index 0000000000..7c6c1e844d --- /dev/null +++ b/arch/arm/include/asm/arch-mx6/mx6sx_pins.h @@ -0,0 +1,1675 @@ +/* + * Copyright (C) 2014 Freescale Semiconductor, Inc. All Rights Reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARCH_MX6_MX6_PINS_H__ +#define __ASM_ARCH_MX6_MX6_PINS_H__ + +#include + +enum { + MX6_PAD_GPIO1_IO00__I2C1_SCL = IOMUX_PAD(0x035C, 0x0014, IOMUX_CONFIG_SION | 0, 0x07A8, 1, 0), + MX6_PAD_GPIO1_IO00__USDHC1_VSELECT = IOMUX_PAD(0x035C, 0x0014, 1, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO00__SPDIF_LOCK = IOMUX_PAD(0x035C, 0x0014, 2, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO00__CCM_WAIT = IOMUX_PAD(0x035C, 0x0014, 3, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO00__WDOG1_WDOG_ANY = IOMUX_PAD(0x035C, 0x0014, 4, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO00__GPIO1_IO_0 = IOMUX_PAD(0x035C, 0x0014, 5, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO00__SNVS_HP_WRAPPER_VIO_5 = IOMUX_PAD(0x035C, 0x0014, 6, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO00__PHY_DTB_1 = IOMUX_PAD(0x035C, 0x0014, 7, 0x0000, 0, 0), + + MX6_PAD_GPIO1_IO01__I2C1_SDA = IOMUX_PAD(0x0360, 0x0018, IOMUX_CONFIG_SION | 0, 0x07AC, 1, 0), + MX6_PAD_GPIO1_IO01__USDHC1_RESET_B = IOMUX_PAD(0x0360, 0x0018, 1, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO01__SPDIF_SR_CLK = IOMUX_PAD(0x0360, 0x0018, 2, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO01__CCM_STOP = IOMUX_PAD(0x0360, 0x0018, 3, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO01__WDOG3_WDOG_B = IOMUX_PAD(0x0360, 0x0018, 4, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO01__GPIO1_IO_1 = IOMUX_PAD(0x0360, 0x0018, 5, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO01__SNVS_HP_WRAPPER_VIO_5_CTL = IOMUX_PAD(0x0360, 0x0018, 6, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO01__PHY_DTB_0 = IOMUX_PAD(0x0360, 0x0018, 7, 0x0000, 0, 0), + + MX6_PAD_GPIO1_IO02__I2C2_SCL = IOMUX_PAD(0x0364, 0x001C, IOMUX_CONFIG_SION | 0, 0x07B0, 1, 0), + MX6_PAD_GPIO1_IO02__USDHC1_CD_B = IOMUX_PAD(0x0364, 0x001C, 1, 0x0864, 1, 0), + MX6_PAD_GPIO1_IO02__CSI2_MCLK = IOMUX_PAD(0x0364, 0x001C, 2, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO02__CCM_DI0_EXT_CLK = IOMUX_PAD(0x0364, 0x001C, 3, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO02__WDOG1_WDOG_B = IOMUX_PAD(0x0364, 0x001C, 4, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO02__GPIO1_IO_2 = IOMUX_PAD(0x0364, 0x001C, 5, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO02__CCM_REF_EN_B = IOMUX_PAD(0x0364, 0x001C, 6, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO02__PHY_TDI = IOMUX_PAD(0x0364, 0x001C, 7, 0x0000, 0, 0), + + MX6_PAD_GPIO1_IO03__I2C2_SDA = IOMUX_PAD(0x0368, 0x0020, IOMUX_CONFIG_SION | 0, 0x07B4, 1, 0), + MX6_PAD_GPIO1_IO03__USDHC1_WP = IOMUX_PAD(0x0368, 0x0020, 1, 0x0868, 1, 0), + MX6_PAD_GPIO1_IO03__ENET1_REF_CLK_25M = IOMUX_PAD(0x0368, 0x0020, 2, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO03__CCM_DI1_EXT_CLK = IOMUX_PAD(0x0368, 0x0020, 3, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO03__WDOG2_WDOG_B = IOMUX_PAD(0x0368, 0x0020, 4, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO03__GPIO1_IO_3 = IOMUX_PAD(0x0368, 0x0020, 5, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO03__CCM_PLL3_BYP = IOMUX_PAD(0x0368, 0x0020, 6, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO03__PHY_TCK = IOMUX_PAD(0x0368, 0x0020, 7, 0x0000, 0, 0), + + MX6_PAD_GPIO1_IO04__UART1_TX = IOMUX_PAD(0x036C, 0x0024, 0, 0x0830, 0, 0), + MX6_PAD_GPIO1_IO04__USDHC2_RESET_B = IOMUX_PAD(0x036C, 0x0024, 1, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO04__ENET1_MDC = IOMUX_PAD(0x036C, 0x0024, 2, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO04__OSC32K_32K_OUT = IOMUX_PAD(0x036C, 0x0024, 3, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO04__ENET2_REF_CLK2 = IOMUX_PAD(0x036C, 0x0024, 4, 0x076C, 0, 0), + MX6_PAD_GPIO1_IO04__GPIO1_IO_4 = IOMUX_PAD(0x036C, 0x0024, 5, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO04__CCM_PLL2_BYP = IOMUX_PAD(0x036C, 0x0024, 6, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO04__PHY_TMS = IOMUX_PAD(0x036C, 0x0024, 7, 0x0000, 0, 0), + + MX6_PAD_GPIO1_IO05__UART1_RX = IOMUX_PAD(0x0370, 0x0028, 0, 0x0830, 1, 0), + MX6_PAD_GPIO1_IO05__USDHC2_VSELECT = IOMUX_PAD(0x0370, 0x0028, 1, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO05__ENET1_MDIO = IOMUX_PAD(0x0370, 0x0028, 2, 0x0764, 0, 0), + MX6_PAD_GPIO1_IO05__ASRC_ASRC_EXT_CLK = IOMUX_PAD(0x0370, 0x0028, 3, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO05__ENET1_REF_CLK1 = IOMUX_PAD(0x0370, 0x0028, 4, 0x0760, 0, 0), + MX6_PAD_GPIO1_IO05__GPIO1_IO_5 = IOMUX_PAD(0x0370, 0x0028, 5, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO05__SRC_TESTER_ACK = IOMUX_PAD(0x0370, 0x0028, 6, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO05__PHY_TDO = IOMUX_PAD(0x0370, 0x0028, 7, 0x0000, 0, 0), + + MX6_PAD_GPIO1_IO06__UART2_TX = IOMUX_PAD(0x0374, 0x002C, 0, 0x0838, 0, 0), + MX6_PAD_GPIO1_IO06__USDHC2_CD_B = IOMUX_PAD(0x0374, 0x002C, 1, 0x086C, 1, 0), + MX6_PAD_GPIO1_IO06__ENET2_MDC = IOMUX_PAD(0x0374, 0x002C, 2, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO06__CSI1_MCLK = IOMUX_PAD(0x0374, 0x002C, 3, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO06__UART1_RTS_B = IOMUX_PAD(0x0374, 0x002C, 4, 0x082C, 0, 0), + MX6_PAD_GPIO1_IO06__GPIO1_IO_6 = IOMUX_PAD(0x0374, 0x002C, 5, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO06__SRC_ANY_PU_RESET = IOMUX_PAD(0x0374, 0x002C, 6, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO06__OCOTP_CTRL_WRAPPER_FUSE_LATCHED = IOMUX_PAD(0x0374, 0x002C, 7, 0x0000, 0, 0), + + MX6_PAD_GPIO1_IO07__UART2_RX = IOMUX_PAD(0x0378, 0x0030, 0, 0x0838, 1, 0), + MX6_PAD_GPIO1_IO07__USDHC2_WP = IOMUX_PAD(0x0378, 0x0030, 1, 0x0870, 1, 0), + MX6_PAD_GPIO1_IO07__ENET2_MDIO = IOMUX_PAD(0x0378, 0x0030, 2, 0x0770, 0, 0), + MX6_PAD_GPIO1_IO07__AUDMUX_MCLK = IOMUX_PAD(0x0378, 0x0030, 3, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO07__UART1_CTS_B = IOMUX_PAD(0x0378, 0x0030, 4, 0x082C, 1, 0), + MX6_PAD_GPIO1_IO07__GPIO1_IO_7 = IOMUX_PAD(0x0378, 0x0030, 5, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO07__SRC_EARLY_RESET = IOMUX_PAD(0x0378, 0x0030, 6, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO07__DCIC2_OUT = IOMUX_PAD(0x0378, 0x0030, 7, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO07__VDEC_DEBUG_44 = IOMUX_PAD(0x0378, 0x0030, 8, 0x0000, 0, 0), + + MX6_PAD_GPIO1_IO08__USB_OTG1_OC = IOMUX_PAD(0x037C, 0x0034, 0, 0x0860, 0, 0), + MX6_PAD_GPIO1_IO08__WDOG1_WDOG_B = IOMUX_PAD(0x037C, 0x0034, 1, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO08__SDMA_EXT_EVENT_0 = IOMUX_PAD(0x037C, 0x0034, 2, 0x081C, 0, 0), + MX6_PAD_GPIO1_IO08__CCM_PMIC_RDY = IOMUX_PAD(0x037C, 0x0034, 3, 0x069C, 1, 0), + MX6_PAD_GPIO1_IO08__UART2_RTS_B = IOMUX_PAD(0x037C, 0x0034, 4, 0x0834, 0, 0), + MX6_PAD_GPIO1_IO08__GPIO1_IO_8 = IOMUX_PAD(0x037C, 0x0034, 5, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO08__SRC_SYSTEM_RESET = IOMUX_PAD(0x037C, 0x0034, 6, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO08__DCIC1_OUT = IOMUX_PAD(0x037C, 0x0034, 7, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO08__VDEC_DEBUG_43 = IOMUX_PAD(0x037C, 0x0034, 8, 0x0000, 0, 0), + + MX6_PAD_GPIO1_IO09__USB_OTG1_PWR = IOMUX_PAD(0x0380, 0x0038, 0, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO09__WDOG2_WDOG_B = IOMUX_PAD(0x0380, 0x0038, 1, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO09__SDMA_EXT_EVENT_1 = IOMUX_PAD(0x0380, 0x0038, 2, 0x0820, 0, 0), + MX6_PAD_GPIO1_IO09__CCM_OUT0 = IOMUX_PAD(0x0380, 0x0038, 3, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO09__UART2_CTS_B = IOMUX_PAD(0x0380, 0x0038, 4, 0x0834, 1, 0), + MX6_PAD_GPIO1_IO09__GPIO1_IO_9 = IOMUX_PAD(0x0380, 0x0038, 5, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO09__SRC_INT_BOOT = IOMUX_PAD(0x0380, 0x0038, 6, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO09__OBSERVE_MUX_OUT_4 = IOMUX_PAD(0x0380, 0x0038, 7, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO09__VDEC_DEBUG_42 = IOMUX_PAD(0x0380, 0x0038, 8, 0x0000, 0, 0), + + MX6_PAD_GPIO1_IO10__ANATOP_OTG1_ID = IOMUX_PAD(0x0384, 0x003C, 0, 0x0624, 0, 0), + MX6_PAD_GPIO1_IO10__SPDIF_EXT_CLK = IOMUX_PAD(0x0384, 0x003C, 1, 0x0828, 0, 0), + MX6_PAD_GPIO1_IO10__PWM1_OUT = IOMUX_PAD(0x0384, 0x003C, 2, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO10__CCM_OUT1 = IOMUX_PAD(0x0384, 0x003C, 3, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO10__CSI1_FIELD = IOMUX_PAD(0x0384, 0x003C, 4, 0x070C, 1, 0), + MX6_PAD_GPIO1_IO10__GPIO1_IO_10 = IOMUX_PAD(0x0384, 0x003C, 5, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO10__CSU_CSU_INT_DEB = IOMUX_PAD(0x0384, 0x003C, 6, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO10__OBSERVE_MUX_OUT_3 = IOMUX_PAD(0x0384, 0x003C, 7, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO10__VDEC_DEBUG_41 = IOMUX_PAD(0x0384, 0x003C, 8, 0x0000, 0, 0), + + MX6_PAD_GPIO1_IO11__USB_OTG2_OC = IOMUX_PAD(0x0388, 0x0040, 0, 0x085C, 0, 0), + MX6_PAD_GPIO1_IO11__SPDIF_IN = IOMUX_PAD(0x0388, 0x0040, 1, 0x0824, 2, 0), + MX6_PAD_GPIO1_IO11__PWM2_OUT = IOMUX_PAD(0x0388, 0x0040, 2, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO11__CCM_CLKO1 = IOMUX_PAD(0x0388, 0x0040, 3, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO11__MLB_DATA = IOMUX_PAD(0x0388, 0x0040, 4, 0x07EC, 0, 0), + MX6_PAD_GPIO1_IO11__GPIO1_IO_11 = IOMUX_PAD(0x0388, 0x0040, 5, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO11__CSU_CSU_ALARM_AUT_0 = IOMUX_PAD(0x0388, 0x0040, 6, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO11__OBSERVE_MUX_OUT_2 = IOMUX_PAD(0x0388, 0x0040, 7, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO11__VDEC_DEBUG_40 = IOMUX_PAD(0x0388, 0x0040, 8, 0x0000, 0, 0), + + MX6_PAD_GPIO1_IO12__USB_OTG2_PWR = IOMUX_PAD(0x038C, 0x0044, 0, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO12__SPDIF_OUT = IOMUX_PAD(0x038C, 0x0044, 1, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO12__PWM3_OUT = IOMUX_PAD(0x038C, 0x0044, 2, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO12__CCM_CLKO2 = IOMUX_PAD(0x038C, 0x0044, 3, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO12__MLB_CLK = IOMUX_PAD(0x038C, 0x0044, 4, 0x07E8, 0, 0), + MX6_PAD_GPIO1_IO12__GPIO1_IO_12 = IOMUX_PAD(0x038C, 0x0044, 5, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO12__CSU_CSU_ALARM_AUT_1 = IOMUX_PAD(0x038C, 0x0044, 6, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO12__OBSERVE_MUX_OUT_1 = IOMUX_PAD(0x038C, 0x0044, 7, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO12__VDEC_DEBUG_39 = IOMUX_PAD(0x038C, 0x0044, 8, 0x0000, 0, 0), + + MX6_PAD_GPIO1_IO13__WDOG1_WDOG_ANY = IOMUX_PAD(0x0390, 0x0048, 0, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO13__ANATOP_OTG2_ID = IOMUX_PAD(0x0390, 0x0048, 1, 0x0628, 0, 0), + MX6_PAD_GPIO1_IO13__PWM4_OUT = IOMUX_PAD(0x0390, 0x0048, 2, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO13__CCM_OUT2 = IOMUX_PAD(0x0390, 0x0048, 3, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO13__MLB_SIG = IOMUX_PAD(0x0390, 0x0048, 4, 0x07F0, 0, 0), + MX6_PAD_GPIO1_IO13__GPIO1_IO_13 = IOMUX_PAD(0x0390, 0x0048, 5, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO13__CSU_CSU_ALARM_AUT_2 = IOMUX_PAD(0x0390, 0x0048, 6, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO13__OBSERVE_MUX_OUT_0 = IOMUX_PAD(0x0390, 0x0048, 7, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO13__VDEC_DEBUG_38 = IOMUX_PAD(0x0390, 0x0048, 8, 0x0000, 0, 0), + + MX6_PAD_CSI_DATA00__CSI1_DATA_2 = IOMUX_PAD(0x0394, 0x004C, 0, 0x06A8, 0, 0), + MX6_PAD_CSI_DATA00__ESAI_TX_CLK = IOMUX_PAD(0x0394, 0x004C, 1, 0x078C, 1, 0), + MX6_PAD_CSI_DATA00__AUDMUX_AUD6_TXC = IOMUX_PAD(0x0394, 0x004C, 2, 0x0684, 1, 0), + MX6_PAD_CSI_DATA00__I2C1_SCL = IOMUX_PAD(0x0394, 0x004C, 3, 0x07A8, 0, 0), + MX6_PAD_CSI_DATA00__UART6_RI_B = IOMUX_PAD(0x0394, 0x004C, 4, 0x0000, 0, 0), + MX6_PAD_CSI_DATA00__GPIO1_IO_14 = IOMUX_PAD(0x0394, 0x004C, 5, 0x0000, 0, 0), + MX6_PAD_CSI_DATA00__WEIM_DATA_23 = IOMUX_PAD(0x0394, 0x004C, 6, 0x0000, 0, 0), + MX6_PAD_CSI_DATA00__SAI1_TX_BCLK = IOMUX_PAD(0x0394, 0x004C, 7, 0x0800, 0, 0), + MX6_PAD_CSI_DATA00__VADC_DATA_4 = IOMUX_PAD(0x0394, 0x004C, 8, 0x0000, 0, 0), + MX6_PAD_CSI_DATA00__MMDC_DEBUG_37 = IOMUX_PAD(0x0394, 0x004C, 9, 0x0000, 0, 0), + + MX6_PAD_CSI_DATA01__CSI1_DATA_3 = IOMUX_PAD(0x0398, 0x0050, 0, 0x06AC, 0, 0), + MX6_PAD_CSI_DATA01__ESAI_TX_FS = IOMUX_PAD(0x0398, 0x0050, 1, 0x077C, 1, 0), + MX6_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS = IOMUX_PAD(0x0398, 0x0050, 2, 0x0688, 1, 0), + MX6_PAD_CSI_DATA01__I2C1_SDA = IOMUX_PAD(0x0398, 0x0050, 3, 0x07AC, 0, 0), + MX6_PAD_CSI_DATA01__UART6_DSR_B = IOMUX_PAD(0x0398, 0x0050, 4, 0x0000, 0, 0), + MX6_PAD_CSI_DATA01__GPIO1_IO_15 = IOMUX_PAD(0x0398, 0x0050, 5, 0x0000, 0, 0), + MX6_PAD_CSI_DATA01__WEIM_DATA_22 = IOMUX_PAD(0x0398, 0x0050, 6, 0x0000, 0, 0), + MX6_PAD_CSI_DATA01__SAI1_TX_SYNC = IOMUX_PAD(0x0398, 0x0050, 7, 0x0804, 0, 0), + MX6_PAD_CSI_DATA01__VADC_DATA_5 = IOMUX_PAD(0x0398, 0x0050, 8, 0x0000, 0, 0), + MX6_PAD_CSI_DATA01__MMDC_DEBUG_38 = IOMUX_PAD(0x0398, 0x0050, 9, 0x0000, 0, 0), + + MX6_PAD_CSI_DATA02__CSI1_DATA_4 = IOMUX_PAD(0x039C, 0x0054, 0, 0x06B0, 0, 0), + MX6_PAD_CSI_DATA02__ESAI_RX_CLK = IOMUX_PAD(0x039C, 0x0054, 1, 0x0788, 1, 0), + MX6_PAD_CSI_DATA02__AUDMUX_AUD6_RXC = IOMUX_PAD(0x039C, 0x0054, 2, 0x067C, 1, 0), + MX6_PAD_CSI_DATA02__KPP_COL_5 = IOMUX_PAD(0x039C, 0x0054, 3, 0x07C8, 0, 0), + MX6_PAD_CSI_DATA02__UART6_DTR_B = IOMUX_PAD(0x039C, 0x0054, 4, 0x0000, 0, 0), + MX6_PAD_CSI_DATA02__GPIO1_IO_16 = IOMUX_PAD(0x039C, 0x0054, 5, 0x0000, 0, 0), + MX6_PAD_CSI_DATA02__WEIM_DATA_21 = IOMUX_PAD(0x039C, 0x0054, 6, 0x0000, 0, 0), + MX6_PAD_CSI_DATA02__SAI1_RX_BCLK = IOMUX_PAD(0x039C, 0x0054, 7, 0x07F4, 0, 0), + MX6_PAD_CSI_DATA02__VADC_DATA_6 = IOMUX_PAD(0x039C, 0x0054, 8, 0x0000, 0, 0), + MX6_PAD_CSI_DATA02__MMDC_DEBUG_39 = IOMUX_PAD(0x039C, 0x0054, 9, 0x0000, 0, 0), + + MX6_PAD_CSI_DATA03__CSI1_DATA_5 = IOMUX_PAD(0x03A0, 0x0058, 0, 0x06B4, 0, 0), + MX6_PAD_CSI_DATA03__ESAI_RX_FS = IOMUX_PAD(0x03A0, 0x0058, 1, 0x0778, 1, 0), + MX6_PAD_CSI_DATA03__AUDMUX_AUD6_RXFS = IOMUX_PAD(0x03A0, 0x0058, 2, 0x0680, 1, 0), + MX6_PAD_CSI_DATA03__KPP_ROW_5 = IOMUX_PAD(0x03A0, 0x0058, 3, 0x07D4, 0, 0), + MX6_PAD_CSI_DATA03__UART6_DCD_B = IOMUX_PAD(0x03A0, 0x0058, 4, 0x0000, 0, 0), + MX6_PAD_CSI_DATA03__GPIO1_IO_17 = IOMUX_PAD(0x03A0, 0x0058, 5, 0x0000, 0, 0), + MX6_PAD_CSI_DATA03__WEIM_DATA_20 = IOMUX_PAD(0x03A0, 0x0058, 6, 0x0000, 0, 0), + MX6_PAD_CSI_DATA03__SAI1_RX_SYNC = IOMUX_PAD(0x03A0, 0x0058, 7, 0x07FC, 0, 0), + MX6_PAD_CSI_DATA03__VADC_DATA_7 = IOMUX_PAD(0x03A0, 0x0058, 8, 0x0000, 0, 0), + MX6_PAD_CSI_DATA03__MMDC_DEBUG_40 = IOMUX_PAD(0x03A0, 0x0058, 9, 0x0000, 0, 0), + + MX6_PAD_CSI_DATA04__CSI1_DATA_6 = IOMUX_PAD(0x03A4, 0x005C, 0, 0x06B8, 0, 0), + MX6_PAD_CSI_DATA04__ESAI_TX1 = IOMUX_PAD(0x03A4, 0x005C, 1, 0x0794, 1, 0), + MX6_PAD_CSI_DATA04__SPDIF_OUT = IOMUX_PAD(0x03A4, 0x005C, 2, 0x0000, 0, 0), + MX6_PAD_CSI_DATA04__KPP_COL_6 = IOMUX_PAD(0x03A4, 0x005C, 3, 0x07CC, 0, 0), + MX6_PAD_CSI_DATA04__UART6_RX = IOMUX_PAD(0x03A4, 0x005C, 4, 0x0858, 0, 0), + MX6_PAD_CSI_DATA04__GPIO1_IO_18 = IOMUX_PAD(0x03A4, 0x005C, 5, 0x0000, 0, 0), + MX6_PAD_CSI_DATA04__WEIM_DATA_19 = IOMUX_PAD(0x03A4, 0x005C, 6, 0x0000, 0, 0), + MX6_PAD_CSI_DATA04__PWM5_OUT = IOMUX_PAD(0x03A4, 0x005C, 7, 0x0000, 0, 0), + MX6_PAD_CSI_DATA04__VADC_DATA_8 = IOMUX_PAD(0x03A4, 0x005C, 8, 0x0000, 0, 0), + MX6_PAD_CSI_DATA04__MMDC_DEBUG_41 = IOMUX_PAD(0x03A4, 0x005C, 9, 0x0000, 0, 0), + + MX6_PAD_CSI_DATA05__CSI1_DATA_7 = IOMUX_PAD(0x03A8, 0x0060, 0, 0x06BC, 0, 0), + MX6_PAD_CSI_DATA05__ESAI_TX4_RX1 = IOMUX_PAD(0x03A8, 0x0060, 1, 0x07A0, 1, 0), + MX6_PAD_CSI_DATA05__SPDIF_IN = IOMUX_PAD(0x03A8, 0x0060, 2, 0x0824, 1, 0), + MX6_PAD_CSI_DATA05__KPP_ROW_6 = IOMUX_PAD(0x03A8, 0x0060, 3, 0x07D8, 0, 0), + MX6_PAD_CSI_DATA05__UART6_TX = IOMUX_PAD(0x03A8, 0x0060, 4, 0x0858, 1, 0), + MX6_PAD_CSI_DATA05__GPIO1_IO_19 = IOMUX_PAD(0x03A8, 0x0060, 5, 0x0000, 0, 0), + MX6_PAD_CSI_DATA05__WEIM_DATA_18 = IOMUX_PAD(0x03A8, 0x0060, 6, 0x0000, 0, 0), + MX6_PAD_CSI_DATA05__PWM6_OUT = IOMUX_PAD(0x03A8, 0x0060, 7, 0x0000, 0, 0), + MX6_PAD_CSI_DATA05__VADC_DATA_9 = IOMUX_PAD(0x03A8, 0x0060, 8, 0x0000, 0, 0), + MX6_PAD_CSI_DATA05__MMDC_DEBUG_42 = IOMUX_PAD(0x03A8, 0x0060, 9, 0x0000, 0, 0), + + MX6_PAD_CSI_DATA06__CSI1_DATA_8 = IOMUX_PAD(0x03AC, 0x0064, 0, 0x06C0, 0, 0), + MX6_PAD_CSI_DATA06__ESAI_TX2_RX3 = IOMUX_PAD(0x03AC, 0x0064, 1, 0x0798, 1, 0), + MX6_PAD_CSI_DATA06__I2C4_SCL = IOMUX_PAD(0x03AC, 0x0064, 2, 0x07C0, 2, 0), + MX6_PAD_CSI_DATA06__KPP_COL_7 = IOMUX_PAD(0x03AC, 0x0064, 3, 0x07D0, 0, 0), + MX6_PAD_CSI_DATA06__UART6_RTS_B = IOMUX_PAD(0x03AC, 0x0064, 4, 0x0854, 0, 0), + MX6_PAD_CSI_DATA06__GPIO1_IO_20 = IOMUX_PAD(0x03AC, 0x0064, 5, 0x0000, 0, 0), + MX6_PAD_CSI_DATA06__WEIM_DATA_17 = IOMUX_PAD(0x03AC, 0x0064, 6, 0x0000, 0, 0), + MX6_PAD_CSI_DATA06__DCIC2_OUT = IOMUX_PAD(0x03AC, 0x0064, 7, 0x0000, 0, 0), + MX6_PAD_CSI_DATA06__VADC_DATA_10 = IOMUX_PAD(0x03AC, 0x0064, 8, 0x0000, 0, 0), + MX6_PAD_CSI_DATA06__MMDC_DEBUG_43 = IOMUX_PAD(0x03AC, 0x0064, 9, 0x0000, 0, 0), + + MX6_PAD_CSI_DATA07__CSI1_DATA_9 = IOMUX_PAD(0x03B0, 0x0068, 0, 0x06C4, 0, 0), + MX6_PAD_CSI_DATA07__ESAI_TX3_RX2 = IOMUX_PAD(0x03B0, 0x0068, 1, 0x079C, 1, 0), + MX6_PAD_CSI_DATA07__I2C4_SDA = IOMUX_PAD(0x03B0, 0x0068, 2, 0x07C4, 2, 0), + MX6_PAD_CSI_DATA07__KPP_ROW_7 = IOMUX_PAD(0x03B0, 0x0068, 3, 0x07DC, 0, 0), + MX6_PAD_CSI_DATA07__UART6_CTS_B = IOMUX_PAD(0x03B0, 0x0068, 4, 0x0854, 1, 0), + MX6_PAD_CSI_DATA07__GPIO1_IO_21 = IOMUX_PAD(0x03B0, 0x0068, 5, 0x0000, 0, 0), + MX6_PAD_CSI_DATA07__WEIM_DATA_16 = IOMUX_PAD(0x03B0, 0x0068, 6, 0x0000, 0, 0), + MX6_PAD_CSI_DATA07__DCIC1_OUT = IOMUX_PAD(0x03B0, 0x0068, 7, 0x0000, 0, 0), + MX6_PAD_CSI_DATA07__VADC_DATA_11 = IOMUX_PAD(0x03B0, 0x0068, 8, 0x0000, 0, 0), + MX6_PAD_CSI_DATA07__MMDC_DEBUG_44 = IOMUX_PAD(0x03B0, 0x0068, 9, 0x0000, 0, 0), + + MX6_PAD_CSI_HSYNC__CSI1_HSYNC = IOMUX_PAD(0x03B4, 0x006C, 0, 0x0700, 0, 0), + MX6_PAD_CSI_HSYNC__ESAI_TX0 = IOMUX_PAD(0x03B4, 0x006C, 1, 0x0790, 1, 0), + MX6_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD = IOMUX_PAD(0x03B4, 0x006C, 2, 0x0678, 1, 0), + MX6_PAD_CSI_HSYNC__UART4_RTS_B = IOMUX_PAD(0x03B4, 0x006C, 3, 0x0844, 2, 0), + MX6_PAD_CSI_HSYNC__MQS_LEFT = IOMUX_PAD(0x03B4, 0x006C, 4, 0x0000, 0, 0), + MX6_PAD_CSI_HSYNC__GPIO1_IO_22 = IOMUX_PAD(0x03B4, 0x006C, 5, 0x0000, 0, 0), + MX6_PAD_CSI_HSYNC__WEIM_DATA_25 = IOMUX_PAD(0x03B4, 0x006C, 6, 0x0000, 0, 0), + MX6_PAD_CSI_HSYNC__SAI1_TX_DATA_0 = IOMUX_PAD(0x03B4, 0x006C, 7, 0x0000, 0, 0), + MX6_PAD_CSI_HSYNC__VADC_DATA_2 = IOMUX_PAD(0x03B4, 0x006C, 8, 0x0000, 0, 0), + MX6_PAD_CSI_HSYNC__MMDC_DEBUG_35 = IOMUX_PAD(0x03B4, 0x006C, 9, 0x0000, 0, 0), + + MX6_PAD_CSI_MCLK__CSI1_MCLK = IOMUX_PAD(0x03B8, 0x0070, 0, 0x0000, 0, 0), + MX6_PAD_CSI_MCLK__ESAI_TX_HF_CLK = IOMUX_PAD(0x03B8, 0x0070, 1, 0x0784, 1, 0), + MX6_PAD_CSI_MCLK__OSC32K_32K_OUT = IOMUX_PAD(0x03B8, 0x0070, 2, 0x0000, 0, 0), + MX6_PAD_CSI_MCLK__UART4_RX = IOMUX_PAD(0x03B8, 0x0070, 3, 0x0848, 2, 0), + MX6_PAD_CSI_MCLK__ANATOP_32K_OUT = IOMUX_PAD(0x03B8, 0x0070, 4, 0x0000, 0, 0), + MX6_PAD_CSI_MCLK__GPIO1_IO_23 = IOMUX_PAD(0x03B8, 0x0070, 5, 0x0000, 0, 0), + MX6_PAD_CSI_MCLK__WEIM_DATA_26 = IOMUX_PAD(0x03B8, 0x0070, 6, 0x0000, 0, 0), + MX6_PAD_CSI_MCLK__CSI1_FIELD = IOMUX_PAD(0x03B8, 0x0070, 7, 0x070C, 0, 0), + MX6_PAD_CSI_MCLK__VADC_DATA_1 = IOMUX_PAD(0x03B8, 0x0070, 8, 0x0000, 0, 0), + MX6_PAD_CSI_MCLK__MMDC_DEBUG_34 = IOMUX_PAD(0x03B8, 0x0070, 9, 0x0000, 0, 0), + + MX6_PAD_CSI_PIXCLK__CSI1_PIXCLK = IOMUX_PAD(0x03BC, 0x0074, 0, 0x0704, 0, 0), + MX6_PAD_CSI_PIXCLK__ESAI_RX_HF_CLK = IOMUX_PAD(0x03BC, 0x0074, 1, 0x0780, 1, 0), + MX6_PAD_CSI_PIXCLK__AUDMUX_MCLK = IOMUX_PAD(0x03BC, 0x0074, 2, 0x0000, 0, 0), + MX6_PAD_CSI_PIXCLK__UART4_TX = IOMUX_PAD(0x03BC, 0x0074, 3, 0x0848, 3, 0), + MX6_PAD_CSI_PIXCLK__ANATOP_24M_OUT = IOMUX_PAD(0x03BC, 0x0074, 4, 0x0000, 0, 0), + MX6_PAD_CSI_PIXCLK__GPIO1_IO_24 = IOMUX_PAD(0x03BC, 0x0074, 5, 0x0000, 0, 0), + MX6_PAD_CSI_PIXCLK__WEIM_DATA_27 = IOMUX_PAD(0x03BC, 0x0074, 6, 0x0000, 0, 0), + MX6_PAD_CSI_PIXCLK__ESAI_TX_HF_CLK = IOMUX_PAD(0x03BC, 0x0074, 7, 0x0784, 2, 0), + MX6_PAD_CSI_PIXCLK__VADC_CLK = IOMUX_PAD(0x03BC, 0x0074, 8, 0x0000, 0, 0), + MX6_PAD_CSI_PIXCLK__MMDC_DEBUG_33 = IOMUX_PAD(0x03BC, 0x0074, 9, 0x0000, 0, 0), + + MX6_PAD_CSI_VSYNC__CSI1_VSYNC = IOMUX_PAD(0x03C0, 0x0078, 0, 0x0708, 0, 0), + MX6_PAD_CSI_VSYNC__ESAI_TX5_RX0 = IOMUX_PAD(0x03C0, 0x0078, 1, 0x07A4, 1, 0), + MX6_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD = IOMUX_PAD(0x03C0, 0x0078, 2, 0x0674, 1, 0), + MX6_PAD_CSI_VSYNC__UART4_CTS_B = IOMUX_PAD(0x03C0, 0x0078, 3, 0x0844, 3, 0), + MX6_PAD_CSI_VSYNC__MQS_RIGHT = IOMUX_PAD(0x03C0, 0x0078, 4, 0x0000, 0, 0), + MX6_PAD_CSI_VSYNC__GPIO1_IO_25 = IOMUX_PAD(0x03C0, 0x0078, 5, 0x0000, 0, 0), + MX6_PAD_CSI_VSYNC__WEIM_DATA_24 = IOMUX_PAD(0x03C0, 0x0078, 6, 0x0000, 0, 0), + MX6_PAD_CSI_VSYNC__SAI1_RX_DATA_0 = IOMUX_PAD(0x03C0, 0x0078, 7, 0x07F8, 0, 0), + MX6_PAD_CSI_VSYNC__VADC_DATA_3 = IOMUX_PAD(0x03C0, 0x0078, 8, 0x0000, 0, 0), + MX6_PAD_CSI_VSYNC__MMDC_DEBUG_36 = IOMUX_PAD(0x03C0, 0x0078, 9, 0x0000, 0, 0), + + MX6_PAD_ENET1_COL__ENET1_COL = IOMUX_PAD(0x03C4, 0x007C, 0, 0x0000, 0, 0), + MX6_PAD_ENET1_COL__ENET2_MDC = IOMUX_PAD(0x03C4, 0x007C, 1, 0x0000, 0, 0), + MX6_PAD_ENET1_COL__AUDMUX_AUD4_TXC = IOMUX_PAD(0x03C4, 0x007C, 2, 0x0654, 1, 0), + MX6_PAD_ENET1_COL__UART1_RI_B = IOMUX_PAD(0x03C4, 0x007C, 3, 0x0000, 0, 0), + MX6_PAD_ENET1_COL__SPDIF_EXT_CLK = IOMUX_PAD(0x03C4, 0x007C, 4, 0x0828, 1, 0), + MX6_PAD_ENET1_COL__GPIO2_IO_0 = IOMUX_PAD(0x03C4, 0x007C, 5, 0x0000, 0, 0), + MX6_PAD_ENET1_COL__CSI2_DATA_23 = IOMUX_PAD(0x03C4, 0x007C, 6, 0x0000, 0, 0), + MX6_PAD_ENET1_COL__LCDIF2_DATA_16 = IOMUX_PAD(0x03C4, 0x007C, 7, 0x0000, 0, 0), + MX6_PAD_ENET1_COL__VDEC_DEBUG_37 = IOMUX_PAD(0x03C4, 0x007C, 8, 0x0000, 0, 0), + MX6_PAD_ENET1_COL__PCIE_CTRL_DEBUG_31 = IOMUX_PAD(0x03C4, 0x007C, 9, 0x0000, 0, 0), + + MX6_PAD_ENET1_CRS__ENET1_CRS = IOMUX_PAD(0x03C8, 0x0080, 0, 0x0000, 0, 0), + MX6_PAD_ENET1_CRS__ENET2_MDIO = IOMUX_PAD(0x03C8, 0x0080, 1, 0x0770, 1, 0), + MX6_PAD_ENET1_CRS__AUDMUX_AUD4_TXD = IOMUX_PAD(0x03C8, 0x0080, 2, 0x0648, 1, 0), + MX6_PAD_ENET1_CRS__UART1_DCD_B = IOMUX_PAD(0x03C8, 0x0080, 3, 0x0000, 0, 0), + MX6_PAD_ENET1_CRS__SPDIF_LOCK = IOMUX_PAD(0x03C8, 0x0080, 4, 0x0000, 0, 0), + MX6_PAD_ENET1_CRS__GPIO2_IO_1 = IOMUX_PAD(0x03C8, 0x0080, 5, 0x0000, 0, 0), + MX6_PAD_ENET1_CRS__CSI2_DATA_22 = IOMUX_PAD(0x03C8, 0x0080, 6, 0x0000, 0, 0), + MX6_PAD_ENET1_CRS__LCDIF2_DATA_17 = IOMUX_PAD(0x03C8, 0x0080, 7, 0x0000, 0, 0), + MX6_PAD_ENET1_CRS__VDEC_DEBUG_36 = IOMUX_PAD(0x03C8, 0x0080, 8, 0x0000, 0, 0), + MX6_PAD_ENET1_CRS__PCIE_CTRL_DEBUG_30 = IOMUX_PAD(0x03C8, 0x0080, 9, 0x0000, 0, 0), + + MX6_PAD_ENET1_MDC__ENET1_MDC = IOMUX_PAD(0x03CC, 0x0084, 0, 0x0000, 0, 0), + MX6_PAD_ENET1_MDC__ENET2_MDC = IOMUX_PAD(0x03CC, 0x0084, 1, 0x0000, 0, 0), + MX6_PAD_ENET1_MDC__AUDMUX_AUD3_RXFS = IOMUX_PAD(0x03CC, 0x0084, 2, 0x0638, 1, 0), + MX6_PAD_ENET1_MDC__ANATOP_24M_OUT = IOMUX_PAD(0x03CC, 0x0084, 3, 0x0000, 0, 0), + MX6_PAD_ENET1_MDC__EPIT2_OUT = IOMUX_PAD(0x03CC, 0x0084, 4, 0x0000, 0, 0), + MX6_PAD_ENET1_MDC__GPIO2_IO_2 = IOMUX_PAD(0x03CC, 0x0084, 5, 0x0000, 0, 0), + MX6_PAD_ENET1_MDC__USB_OTG1_PWR = IOMUX_PAD(0x03CC, 0x0084, 6, 0x0000, 0, 0), + MX6_PAD_ENET1_MDC__PWM7_OUT = IOMUX_PAD(0x03CC, 0x0084, 7, 0x0000, 0, 0), + + MX6_PAD_ENET1_MDIO__ENET1_MDIO = IOMUX_PAD(0x03D0, 0x0088, 0, 0x0764, 1, 0), + MX6_PAD_ENET1_MDIO__ENET2_MDIO = IOMUX_PAD(0x03D0, 0x0088, 1, 0x0770, 2, 0), + MX6_PAD_ENET1_MDIO__AUDMUX_MCLK = IOMUX_PAD(0x03D0, 0x0088, 2, 0x0000, 0, 0), + MX6_PAD_ENET1_MDIO__OSC32K_32K_OUT = IOMUX_PAD(0x03D0, 0x0088, 3, 0x0000, 0, 0), + MX6_PAD_ENET1_MDIO__EPIT1_OUT = IOMUX_PAD(0x03D0, 0x0088, 4, 0x0000, 0, 0), + MX6_PAD_ENET1_MDIO__GPIO2_IO_3 = IOMUX_PAD(0x03D0, 0x0088, 5, 0x0000, 0, 0), + MX6_PAD_ENET1_MDIO__USB_OTG1_OC = IOMUX_PAD(0x03D0, 0x0088, 6, 0x0860, 1, 0), + MX6_PAD_ENET1_MDIO__PWM8_OUT = IOMUX_PAD(0x03D0, 0x0088, 7, 0x0000, 0, 0), + + MX6_PAD_ENET1_RX_CLK__ENET1_RX_CLK = IOMUX_PAD(0x03D4, 0x008C, 0, 0x0768, 0, 0), + MX6_PAD_ENET1_RX_CLK__ENET1_REF_CLK_25M = IOMUX_PAD(0x03D4, 0x008C, 1, 0x0000, 0, 0), + MX6_PAD_ENET1_RX_CLK__AUDMUX_AUD4_TXFS = IOMUX_PAD(0x03D4, 0x008C, 2, 0x0658, 1, 0), + MX6_PAD_ENET1_RX_CLK__UART1_DSR_B = IOMUX_PAD(0x03D4, 0x008C, 3, 0x0000, 0, 0), + MX6_PAD_ENET1_RX_CLK__SPDIF_OUT = IOMUX_PAD(0x03D4, 0x008C, 4, 0x0000, 0, 0), + MX6_PAD_ENET1_RX_CLK__GPIO2_IO_4 = IOMUX_PAD(0x03D4, 0x008C, 5, 0x0000, 0, 0), + MX6_PAD_ENET1_RX_CLK__CSI2_DATA_21 = IOMUX_PAD(0x03D4, 0x008C, 6, 0x0000, 0, 0), + MX6_PAD_ENET1_RX_CLK__LCDIF2_DATA_18 = IOMUX_PAD(0x03D4, 0x008C, 7, 0x0000, 0, 0), + MX6_PAD_ENET1_RX_CLK__VDEC_DEBUG_35 = IOMUX_PAD(0x03D4, 0x008C, 8, 0x0000, 0, 0), + MX6_PAD_ENET1_RX_CLK__PCIE_CTRL_DEBUG_29 = IOMUX_PAD(0x03D4, 0x008C, 9, 0x0000, 0, 0), + + MX6_PAD_ENET1_TX_CLK__ENET1_TX_CLK = IOMUX_PAD(0x03D8, 0x0090, 0, 0x0000, 0, 0), + MX6_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 = IOMUX_PAD(0x03D8, 0x0090, 1, 0x0760, 1, 0), + MX6_PAD_ENET1_TX_CLK__AUDMUX_AUD4_RXD = IOMUX_PAD(0x03D8, 0x0090, 2, 0x0644, 1, 0), + MX6_PAD_ENET1_TX_CLK__UART1_DTR_B = IOMUX_PAD(0x03D8, 0x0090, 3, 0x0000, 0, 0), + MX6_PAD_ENET1_TX_CLK__SPDIF_SR_CLK = IOMUX_PAD(0x03D8, 0x0090, 4, 0x0000, 0, 0), + MX6_PAD_ENET1_TX_CLK__GPIO2_IO_5 = IOMUX_PAD(0x03D8, 0x0090, 5, 0x0000, 0, 0), + MX6_PAD_ENET1_TX_CLK__CSI2_DATA_20 = IOMUX_PAD(0x03D8, 0x0090, 6, 0x0000, 0, 0), + MX6_PAD_ENET1_TX_CLK__LCDIF2_DATA_19 = IOMUX_PAD(0x03D8, 0x0090, 7, 0x0000, 0, 0), + MX6_PAD_ENET1_TX_CLK__VDEC_DEBUG_34 = IOMUX_PAD(0x03D8, 0x0090, 8, 0x0000, 0, 0), + MX6_PAD_ENET1_TX_CLK__PCIE_CTRL_DEBUG_28 = IOMUX_PAD(0x03D8, 0x0090, 9, 0x0000, 0, 0), + + MX6_PAD_ENET2_COL__ENET2_COL = IOMUX_PAD(0x03DC, 0x0094, 0, 0x0000, 0, 0), + MX6_PAD_ENET2_COL__ENET1_MDC = IOMUX_PAD(0x03DC, 0x0094, 1, 0x0000, 0, 0), + MX6_PAD_ENET2_COL__AUDMUX_AUD4_RXC = IOMUX_PAD(0x03DC, 0x0094, 2, 0x064C, 1, 0), + MX6_PAD_ENET2_COL__UART1_RX = IOMUX_PAD(0x03DC, 0x0094, 3, 0x0830, 2, 0), + MX6_PAD_ENET2_COL__SPDIF_IN = IOMUX_PAD(0x03DC, 0x0094, 4, 0x0824, 3, 0), + MX6_PAD_ENET2_COL__GPIO2_IO_6 = IOMUX_PAD(0x03DC, 0x0094, 5, 0x0000, 0, 0), + MX6_PAD_ENET2_COL__ANATOP_OTG1_ID = IOMUX_PAD(0x03DC, 0x0094, 6, 0x0624, 1, 0), + MX6_PAD_ENET2_COL__LCDIF2_DATA_20 = IOMUX_PAD(0x03DC, 0x0094, 7, 0x0000, 0, 0), + MX6_PAD_ENET2_COL__VDEC_DEBUG_33 = IOMUX_PAD(0x03DC, 0x0094, 8, 0x0000, 0, 0), + MX6_PAD_ENET2_COL__PCIE_CTRL_DEBUG_27 = IOMUX_PAD(0x03DC, 0x0094, 9, 0x0000, 0, 0), + + MX6_PAD_ENET2_CRS__ENET2_CRS = IOMUX_PAD(0x03E0, 0x0098, 0, 0x0000, 0, 0), + MX6_PAD_ENET2_CRS__ENET1_MDIO = IOMUX_PAD(0x03E0, 0x0098, 1, 0x0764, 2, 0), + MX6_PAD_ENET2_CRS__AUDMUX_AUD4_RXFS = IOMUX_PAD(0x03E0, 0x0098, 2, 0x0650, 1, 0), + MX6_PAD_ENET2_CRS__UART1_TX = IOMUX_PAD(0x03E0, 0x0098, 3, 0x0830, 3, 0), + MX6_PAD_ENET2_CRS__MLB_SIG = IOMUX_PAD(0x03E0, 0x0098, 4, 0x07F0, 1, 0), + MX6_PAD_ENET2_CRS__GPIO2_IO_7 = IOMUX_PAD(0x03E0, 0x0098, 5, 0x0000, 0, 0), + MX6_PAD_ENET2_CRS__ANATOP_OTG2_ID = IOMUX_PAD(0x03E0, 0x0098, 6, 0x0628, 1, 0), + MX6_PAD_ENET2_CRS__LCDIF2_DATA_21 = IOMUX_PAD(0x03E0, 0x0098, 7, 0x0000, 0, 0), + MX6_PAD_ENET2_CRS__VDEC_DEBUG_32 = IOMUX_PAD(0x03E0, 0x0098, 8, 0x0000, 0, 0), + MX6_PAD_ENET2_CRS__PCIE_CTRL_DEBUG_26 = IOMUX_PAD(0x03E0, 0x0098, 9, 0x0000, 0, 0), + + MX6_PAD_ENET2_RX_CLK__ENET2_RX_CLK = IOMUX_PAD(0x03E4, 0x009C, 0, 0x0774, 0, 0), + MX6_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M = IOMUX_PAD(0x03E4, 0x009C, 1, 0x0000, 0, 0), + MX6_PAD_ENET2_RX_CLK__I2C3_SCL = IOMUX_PAD(0x03E4, 0x009C, 2, 0x07B8, 1, 0), + MX6_PAD_ENET2_RX_CLK__UART1_RTS_B = IOMUX_PAD(0x03E4, 0x009C, 3, 0x082C, 2, 0), + MX6_PAD_ENET2_RX_CLK__MLB_DATA = IOMUX_PAD(0x03E4, 0x009C, 4, 0x07EC, 1, 0), + MX6_PAD_ENET2_RX_CLK__GPIO2_IO_8 = IOMUX_PAD(0x03E4, 0x009C, 5, 0x0000, 0, 0), + MX6_PAD_ENET2_RX_CLK__USB_OTG2_OC = IOMUX_PAD(0x03E4, 0x009C, 6, 0x085C, 1, 0), + MX6_PAD_ENET2_RX_CLK__LCDIF2_DATA_22 = IOMUX_PAD(0x03E4, 0x009C, 7, 0x0000, 0, 0), + MX6_PAD_ENET2_RX_CLK__VDEC_DEBUG_31 = IOMUX_PAD(0x03E4, 0x009C, 8, 0x0000, 0, 0), + MX6_PAD_ENET2_RX_CLK__PCIE_CTRL_DEBUG_25 = IOMUX_PAD(0x03E4, 0x009C, 9, 0x0000, 0, 0), + + MX6_PAD_ENET2_TX_CLK__ENET2_TX_CLK = IOMUX_PAD(0x03E8, 0x00A0, 0, 0x0000, 0, 0), + MX6_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 = IOMUX_PAD(0x03E8, 0x00A0, 1, 0x076C, 1, 0), + MX6_PAD_ENET2_TX_CLK__I2C3_SDA = IOMUX_PAD(0x03E8, 0x00A0, 2, 0x07BC, 1, 0), + MX6_PAD_ENET2_TX_CLK__UART1_CTS_B = IOMUX_PAD(0x03E8, 0x00A0, 3, 0x082C, 3, 0), + MX6_PAD_ENET2_TX_CLK__MLB_CLK = IOMUX_PAD(0x03E8, 0x00A0, 4, 0x07E8, 1, 0), + MX6_PAD_ENET2_TX_CLK__GPIO2_IO_9 = IOMUX_PAD(0x03E8, 0x00A0, 5, 0x0000, 0, 0), + MX6_PAD_ENET2_TX_CLK__USB_OTG2_PWR = IOMUX_PAD(0x03E8, 0x00A0, 6, 0x0000, 0, 0), + MX6_PAD_ENET2_TX_CLK__LCDIF2_DATA_23 = IOMUX_PAD(0x03E8, 0x00A0, 7, 0x0000, 0, 0), + MX6_PAD_ENET2_TX_CLK__VDEC_DEBUG_30 = IOMUX_PAD(0x03E8, 0x00A0, 8, 0x0000, 0, 0), + MX6_PAD_ENET2_TX_CLK__PCIE_CTRL_DEBUG_24 = IOMUX_PAD(0x03E8, 0x00A0, 9, 0x0000, 0, 0), + + MX6_PAD_KEY_COL0__KPP_COL_0 = IOMUX_PAD(0x03EC, 0x00A4, 0, 0x0000, 0, 0), + MX6_PAD_KEY_COL0__USDHC3_CD_B = IOMUX_PAD(0x03EC, 0x00A4, 1, 0x0000, 0, 0), + MX6_PAD_KEY_COL0__UART6_RTS_B = IOMUX_PAD(0x03EC, 0x00A4, 2, 0x0854, 2, 0), + MX6_PAD_KEY_COL0__ECSPI1_SCLK = IOMUX_PAD(0x03EC, 0x00A4, 3, 0x0710, 0, 0), + MX6_PAD_KEY_COL0__AUDMUX_AUD5_TXC = IOMUX_PAD(0x03EC, 0x00A4, 4, 0x066C, 0, 0), + MX6_PAD_KEY_COL0__GPIO2_IO_10 = IOMUX_PAD(0x03EC, 0x00A4, 5, 0x0000, 0, 0), + MX6_PAD_KEY_COL0__SDMA_EXT_EVENT_1 = IOMUX_PAD(0x03EC, 0x00A4, 6, 0x0820, 1, 0), + MX6_PAD_KEY_COL0__SAI2_TX_BCLK = IOMUX_PAD(0x03EC, 0x00A4, 7, 0x0814, 0, 0), + MX6_PAD_KEY_COL0__VADC_DATA_0 = IOMUX_PAD(0x03EC, 0x00A4, 8, 0x0000, 0, 0), + + MX6_PAD_KEY_COL1__KPP_COL_1 = IOMUX_PAD(0x03F0, 0x00A8, 0, 0x0000, 0, 0), + MX6_PAD_KEY_COL1__USDHC3_RESET_B = IOMUX_PAD(0x03F0, 0x00A8, 1, 0x0000, 0, 0), + MX6_PAD_KEY_COL1__UART6_TX = IOMUX_PAD(0x03F0, 0x00A8, 2, 0x0858, 2, 0), + MX6_PAD_KEY_COL1__ECSPI1_MISO = IOMUX_PAD(0x03F0, 0x00A8, 3, 0x0714, 0, 0), + MX6_PAD_KEY_COL1__AUDMUX_AUD5_TXFS = IOMUX_PAD(0x03F0, 0x00A8, 4, 0x0670, 0, 0), + MX6_PAD_KEY_COL1__GPIO2_IO_11 = IOMUX_PAD(0x03F0, 0x00A8, 5, 0x0000, 0, 0), + MX6_PAD_KEY_COL1__USDHC3_RESET = IOMUX_PAD(0x03F0, 0x00A8, 6, 0x0000, 0, 0), + MX6_PAD_KEY_COL1__SAI2_TX_SYNC = IOMUX_PAD(0x03F0, 0x00A8, 7, 0x0818, 0, 0), + + MX6_PAD_KEY_COL2__KPP_COL_2 = IOMUX_PAD(0x03F4, 0x00AC, 0, 0x0000, 0, 0), + MX6_PAD_KEY_COL2__USDHC4_CD_B = IOMUX_PAD(0x03F4, 0x00AC, 1, 0x0874, 1, 0), + MX6_PAD_KEY_COL2__UART5_RTS_B = IOMUX_PAD(0x03F4, 0x00AC, 2, 0x084C, 2, 0), + MX6_PAD_KEY_COL2__CAN1_TX = IOMUX_PAD(0x03F4, 0x00AC, 3, 0x0000, 0, 0), + MX6_PAD_KEY_COL2__CANFD_TX1 = IOMUX_PAD(0x03F4, 0x00AC, 4, 0x0000, 0, 0), + MX6_PAD_KEY_COL2__GPIO2_IO_12 = IOMUX_PAD(0x03F4, 0x00AC, 5, 0x0000, 0, 0), + MX6_PAD_KEY_COL2__WEIM_DATA_30 = IOMUX_PAD(0x03F4, 0x00AC, 6, 0x0000, 0, 0), + MX6_PAD_KEY_COL2__ECSPI1_RDY = IOMUX_PAD(0x03F4, 0x00AC, 7, 0x0000, 0, 0), + + MX6_PAD_KEY_COL3__KPP_COL_3 = IOMUX_PAD(0x03F8, 0x00B0, 0, 0x0000, 0, 0), + MX6_PAD_KEY_COL3__USDHC4_LCTL = IOMUX_PAD(0x03F8, 0x00B0, 1, 0x0000, 0, 0), + MX6_PAD_KEY_COL3__UART5_TX = IOMUX_PAD(0x03F8, 0x00B0, 2, 0x0850, 2, 0), + MX6_PAD_KEY_COL3__CAN2_TX = IOMUX_PAD(0x03F8, 0x00B0, 3, 0x0000, 0, 0), + MX6_PAD_KEY_COL3__CANFD_TX2 = IOMUX_PAD(0x03F8, 0x00B0, 4, 0x0000, 0, 0), + MX6_PAD_KEY_COL3__GPIO2_IO_13 = IOMUX_PAD(0x03F8, 0x00B0, 5, 0x0000, 0, 0), + MX6_PAD_KEY_COL3__WEIM_DATA_28 = IOMUX_PAD(0x03F8, 0x00B0, 6, 0x0000, 0, 0), + MX6_PAD_KEY_COL3__ECSPI1_SS2 = IOMUX_PAD(0x03F8, 0x00B0, 7, 0x0000, 0, 0), + + MX6_PAD_KEY_COL4__KPP_COL_4 = IOMUX_PAD(0x03FC, 0x00B4, 0, 0x0000, 0, 0), + MX6_PAD_KEY_COL4__ENET2_MDC = IOMUX_PAD(0x03FC, 0x00B4, 1, 0x0000, 0, 0), + MX6_PAD_KEY_COL4__I2C3_SCL = IOMUX_PAD(0x03FC, 0x00B4, 2, 0x07B8, 2, 0), + MX6_PAD_KEY_COL4__USDHC2_LCTL = IOMUX_PAD(0x03FC, 0x00B4, 3, 0x0000, 0, 0), + MX6_PAD_KEY_COL4__AUDMUX_AUD5_RXC = IOMUX_PAD(0x03FC, 0x00B4, 4, 0x0664, 0, 0), + MX6_PAD_KEY_COL4__GPIO2_IO_14 = IOMUX_PAD(0x03FC, 0x00B4, 5, 0x0000, 0, 0), + MX6_PAD_KEY_COL4__WEIM_CRE = IOMUX_PAD(0x03FC, 0x00B4, 6, 0x0000, 0, 0), + MX6_PAD_KEY_COL4__SAI2_RX_BCLK = IOMUX_PAD(0x03FC, 0x00B4, 7, 0x0808, 0, 0), + + MX6_PAD_KEY_ROW0__KPP_ROW_0 = IOMUX_PAD(0x0400, 0x00B8, 0, 0x0000, 0, 0), + MX6_PAD_KEY_ROW0__USDHC3_WP = IOMUX_PAD(0x0400, 0x00B8, 1, 0x0000, 0, 0), + MX6_PAD_KEY_ROW0__UART6_CTS_B = IOMUX_PAD(0x0400, 0x00B8, 2, 0x0854, 3, 0), + MX6_PAD_KEY_ROW0__ECSPI1_MOSI = IOMUX_PAD(0x0400, 0x00B8, 3, 0x0718, 0, 0), + MX6_PAD_KEY_ROW0__AUDMUX_AUD5_TXD = IOMUX_PAD(0x0400, 0x00B8, 4, 0x0660, 0, 0), + MX6_PAD_KEY_ROW0__GPIO2_IO_15 = IOMUX_PAD(0x0400, 0x00B8, 5, 0x0000, 0, 0), + MX6_PAD_KEY_ROW0__SDMA_EXT_EVENT_0 = IOMUX_PAD(0x0400, 0x00B8, 6, 0x081C, 1, 0), + MX6_PAD_KEY_ROW0__SAI2_TX_DATA_0 = IOMUX_PAD(0x0400, 0x00B8, 7, 0x0000, 0, 0), + MX6_PAD_KEY_ROW0__GPU_IDLE = IOMUX_PAD(0x0400, 0x00B8, 8, 0x0000, 0, 0), + + MX6_PAD_KEY_ROW1__KPP_ROW_1 = IOMUX_PAD(0x0404, 0x00BC, 0, 0x0000, 0, 0), + MX6_PAD_KEY_ROW1__USDHC4_VSELECT = IOMUX_PAD(0x0404, 0x00BC, 1, 0x0000, 0, 0), + MX6_PAD_KEY_ROW1__UART6_RX = IOMUX_PAD(0x0404, 0x00BC, 2, 0x0858, 3, 0), + MX6_PAD_KEY_ROW1__ECSPI1_SS0 = IOMUX_PAD(0x0404, 0x00BC, 3, 0x071C, 0, 0), + MX6_PAD_KEY_ROW1__AUDMUX_AUD5_RXD = IOMUX_PAD(0x0404, 0x00BC, 4, 0x065C, 0, 0), + MX6_PAD_KEY_ROW1__GPIO2_IO_16 = IOMUX_PAD(0x0404, 0x00BC, 5, 0x0000, 0, 0), + MX6_PAD_KEY_ROW1__WEIM_DATA_31 = IOMUX_PAD(0x0404, 0x00BC, 6, 0x0000, 0, 0), + MX6_PAD_KEY_ROW1__SAI2_RX_DATA_0 = IOMUX_PAD(0x0404, 0x00BC, 7, 0x080C, 0, 0), + MX6_PAD_KEY_ROW1__M4_NMI = IOMUX_PAD(0x0404, 0x00BC, 8, 0x0000, 0, 0), + + MX6_PAD_KEY_ROW2__KPP_ROW_2 = IOMUX_PAD(0x0408, 0x00C0, 0, 0x0000, 0, 0), + MX6_PAD_KEY_ROW2__USDHC4_WP = IOMUX_PAD(0x0408, 0x00C0, 1, 0x0878, 1, 0), + MX6_PAD_KEY_ROW2__UART5_CTS_B = IOMUX_PAD(0x0408, 0x00C0, 2, 0x084C, 3, 0), + MX6_PAD_KEY_ROW2__CAN1_RX = IOMUX_PAD(0x0408, 0x00C0, 3, 0x068C, 1, 0), + MX6_PAD_KEY_ROW2__CANFD_RX1 = IOMUX_PAD(0x0408, 0x00C0, 4, 0x0694, 1, 0), + MX6_PAD_KEY_ROW2__GPIO2_IO_17 = IOMUX_PAD(0x0408, 0x00C0, 5, 0x0000, 0, 0), + MX6_PAD_KEY_ROW2__WEIM_DATA_29 = IOMUX_PAD(0x0408, 0x00C0, 6, 0x0000, 0, 0), + MX6_PAD_KEY_ROW2__ECSPI1_SS3 = IOMUX_PAD(0x0408, 0x00C0, 7, 0x0000, 0, 0), + + MX6_PAD_KEY_ROW3__KPP_ROW_3 = IOMUX_PAD(0x040C, 0x00C4, 0, 0x0000, 0, 0), + MX6_PAD_KEY_ROW3__USDHC3_LCTL = IOMUX_PAD(0x040C, 0x00C4, 1, 0x0000, 0, 0), + MX6_PAD_KEY_ROW3__UART5_RX = IOMUX_PAD(0x040C, 0x00C4, 2, 0x0850, 3, 0), + MX6_PAD_KEY_ROW3__CAN2_RX = IOMUX_PAD(0x040C, 0x00C4, 3, 0x0690, 1, 0), + MX6_PAD_KEY_ROW3__CANFD_RX2 = IOMUX_PAD(0x040C, 0x00C4, 4, 0x0698, 1, 0), + MX6_PAD_KEY_ROW3__GPIO2_IO_18 = IOMUX_PAD(0x040C, 0x00C4, 5, 0x0000, 0, 0), + MX6_PAD_KEY_ROW3__WEIM_DTACK_B = IOMUX_PAD(0x040C, 0x00C4, 6, 0x0000, 0, 0), + MX6_PAD_KEY_ROW3__ECSPI1_SS1 = IOMUX_PAD(0x040C, 0x00C4, 7, 0x0000, 0, 0), + + MX6_PAD_KEY_ROW4__KPP_ROW_4 = IOMUX_PAD(0x0410, 0x00C8, 0, 0x0000, 0, 0), + MX6_PAD_KEY_ROW4__ENET2_MDIO = IOMUX_PAD(0x0410, 0x00C8, 1, 0x0770, 3, 0), + MX6_PAD_KEY_ROW4__I2C3_SDA = IOMUX_PAD(0x0410, 0x00C8, 2, 0x07BC, 2, 0), + MX6_PAD_KEY_ROW4__USDHC1_LCTL = IOMUX_PAD(0x0410, 0x00C8, 3, 0x0000, 0, 0), + MX6_PAD_KEY_ROW4__AUDMUX_AUD5_RXFS = IOMUX_PAD(0x0410, 0x00C8, 4, 0x0668, 0, 0), + MX6_PAD_KEY_ROW4__GPIO2_IO_19 = IOMUX_PAD(0x0410, 0x00C8, 5, 0x0000, 0, 0), + MX6_PAD_KEY_ROW4__WEIM_ACLK_FREERUN = IOMUX_PAD(0x0410, 0x00C8, 6, 0x0000, 0, 0), + MX6_PAD_KEY_ROW4__SAI2_RX_SYNC = IOMUX_PAD(0x0410, 0x00C8, 7, 0x0810, 0, 0), + + MX6_PAD_LCD1_CLK__LCDIF1_CLK = IOMUX_PAD(0x0414, 0x00CC, 0, 0x0000, 0, 0), + MX6_PAD_LCD1_CLK__LCDIF1_WR_RWN = IOMUX_PAD(0x0414, 0x00CC, 1, 0x0000, 0, 0), + MX6_PAD_LCD1_CLK__AUDMUX_AUD3_RXC = IOMUX_PAD(0x0414, 0x00CC, 2, 0x0634, 1, 0), + MX6_PAD_LCD1_CLK__ENET1_1588_EVENT2_IN = IOMUX_PAD(0x0414, 0x00CC, 3, 0x0000, 0, 0), + MX6_PAD_LCD1_CLK__CSI1_DATA_16 = IOMUX_PAD(0x0414, 0x00CC, 4, 0x06DC, 0, 0), + MX6_PAD_LCD1_CLK__GPIO3_IO_0 = IOMUX_PAD(0x0414, 0x00CC, 5, 0x0000, 0, 0), + MX6_PAD_LCD1_CLK__USDHC1_WP = IOMUX_PAD(0x0414, 0x00CC, 6, 0x0868, 0, 0), + MX6_PAD_LCD1_CLK__SIM_M_HADDR_16 = IOMUX_PAD(0x0414, 0x00CC, 7, 0x0000, 0, 0), + MX6_PAD_LCD1_CLK__VADC_TEST_0 = IOMUX_PAD(0x0414, 0x00CC, 8, 0x0000, 0, 0), + MX6_PAD_LCD1_CLK__MMDC_DEBUG_0 = IOMUX_PAD(0x0414, 0x00CC, 9, 0x0000, 0, 0), + + MX6_PAD_LCD1_DATA00__LCDIF1_DATA_0 = IOMUX_PAD(0x0418, 0x00D0, 0, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA00__WEIM_CS1_B = IOMUX_PAD(0x0418, 0x00D0, 1, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA00__M4_TRACE_0 = IOMUX_PAD(0x0418, 0x00D0, 2, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA00__KITTEN_TRACE_0 = IOMUX_PAD(0x0418, 0x00D0, 3, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA00__CSI1_DATA_20 = IOMUX_PAD(0x0418, 0x00D0, 4, 0x06EC, 0, 0), + MX6_PAD_LCD1_DATA00__GPIO3_IO_1 = IOMUX_PAD(0x0418, 0x00D0, 5, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA00__SRC_BT_CFG_0 = IOMUX_PAD(0x0418, 0x00D0, 6, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA00__SIM_M_HADDR_21 = IOMUX_PAD(0x0418, 0x00D0, 7, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA00__VADC_TEST_5 = IOMUX_PAD(0x0418, 0x00D0, 8, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA00__MMDC_DEBUG_5 = IOMUX_PAD(0x0418, 0x00D0, 9, 0x0000, 0, 0), + + MX6_PAD_LCD1_DATA01__LCDIF1_DATA_1 = IOMUX_PAD(0x041C, 0x00D4, 0, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA01__WEIM_CS2_B = IOMUX_PAD(0x041C, 0x00D4, 1, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA01__M4_TRACE_1 = IOMUX_PAD(0x041C, 0x00D4, 2, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA01__KITTEN_TRACE_1 = IOMUX_PAD(0x041C, 0x00D4, 3, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA01__CSI1_DATA_21 = IOMUX_PAD(0x041C, 0x00D4, 4, 0x06F0, 0, 0), + MX6_PAD_LCD1_DATA01__GPIO3_IO_2 = IOMUX_PAD(0x041C, 0x00D4, 5, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA01__SRC_BT_CFG_1 = IOMUX_PAD(0x041C, 0x00D4, 6, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA01__SIM_M_HADDR_22 = IOMUX_PAD(0x041C, 0x00D4, 7, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA01__VADC_TEST_6 = IOMUX_PAD(0x041C, 0x00D4, 8, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA01__MMDC_DEBUG_6 = IOMUX_PAD(0x041C, 0x00D4, 9, 0x0000, 0, 0), + + MX6_PAD_LCD1_DATA02__LCDIF1_DATA_2 = IOMUX_PAD(0x0420, 0x00D8, 0, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA02__WEIM_CS3_B = IOMUX_PAD(0x0420, 0x00D8, 1, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA02__M4_TRACE_2 = IOMUX_PAD(0x0420, 0x00D8, 2, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA02__KITTEN_TRACE_2 = IOMUX_PAD(0x0420, 0x00D8, 3, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA02__CSI1_DATA_22 = IOMUX_PAD(0x0420, 0x00D8, 4, 0x06F4, 0, 0), + MX6_PAD_LCD1_DATA02__GPIO3_IO_3 = IOMUX_PAD(0x0420, 0x00D8, 5, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA02__SRC_BT_CFG_2 = IOMUX_PAD(0x0420, 0x00D8, 6, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA02__SIM_M_HADDR_23 = IOMUX_PAD(0x0420, 0x00D8, 7, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA02__VADC_TEST_7 = IOMUX_PAD(0x0420, 0x00D8, 8, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA02__MMDC_DEBUG_7 = IOMUX_PAD(0x0420, 0x00D8, 9, 0x0000, 0, 0), + + MX6_PAD_LCD1_DATA03__LCDIF1_DATA_3 = IOMUX_PAD(0x0424, 0x00DC, 0, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA03__WEIM_ADDR_24 = IOMUX_PAD(0x0424, 0x00DC, 1, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA03__M4_TRACE_3 = IOMUX_PAD(0x0424, 0x00DC, 2, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA03__KITTEN_TRACE_3 = IOMUX_PAD(0x0424, 0x00DC, 3, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA03__CSI1_DATA_23 = IOMUX_PAD(0x0424, 0x00DC, 4, 0x06F8, 0, 0), + MX6_PAD_LCD1_DATA03__GPIO3_IO_4 = IOMUX_PAD(0x0424, 0x00DC, 5, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA03__SRC_BT_CFG_3 = IOMUX_PAD(0x0424, 0x00DC, 6, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA03__SIM_M_HADDR_24 = IOMUX_PAD(0x0424, 0x00DC, 7, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA03__VADC_TEST_8 = IOMUX_PAD(0x0424, 0x00DC, 8, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA03__MMDC_DEBUG_8 = IOMUX_PAD(0x0424, 0x00DC, 9, 0x0000, 0, 0), + + MX6_PAD_LCD1_DATA04__LCDIF1_DATA_4 = IOMUX_PAD(0x0428, 0x00E0, 0, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA04__WEIM_ADDR_25 = IOMUX_PAD(0x0428, 0x00E0, 1, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA04__KITTEN_TRACE_4 = IOMUX_PAD(0x0428, 0x00E0, 3, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA04__CSI1_VSYNC = IOMUX_PAD(0x0428, 0x00E0, 4, 0x0708, 1, 0), + MX6_PAD_LCD1_DATA04__GPIO3_IO_5 = IOMUX_PAD(0x0428, 0x00E0, 5, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA04__SRC_BT_CFG_4 = IOMUX_PAD(0x0428, 0x00E0, 6, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA04__SIM_M_HADDR_25 = IOMUX_PAD(0x0428, 0x00E0, 7, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA04__VADC_TEST_9 = IOMUX_PAD(0x0428, 0x00E0, 8, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA04__MMDC_DEBUG_9 = IOMUX_PAD(0x0428, 0x00E0, 9, 0x0000, 0, 0), + + MX6_PAD_LCD1_DATA05__LCDIF1_DATA_5 = IOMUX_PAD(0x042C, 0x00E4, 0, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA05__WEIM_ADDR_26 = IOMUX_PAD(0x042C, 0x00E4, 1, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA05__KITTEN_TRACE_5 = IOMUX_PAD(0x042C, 0x00E4, 3, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA05__CSI1_HSYNC = IOMUX_PAD(0x042C, 0x00E4, 4, 0x0700, 1, 0), + MX6_PAD_LCD1_DATA05__GPIO3_IO_6 = IOMUX_PAD(0x042C, 0x00E4, 5, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA05__SRC_BT_CFG_5 = IOMUX_PAD(0x042C, 0x00E4, 6, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA05__SIM_M_HADDR_26 = IOMUX_PAD(0x042C, 0x00E4, 7, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA05__VADC_TEST_10 = IOMUX_PAD(0x042C, 0x00E4, 8, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA05__MMDC_DEBUG_10 = IOMUX_PAD(0x042C, 0x00E4, 9, 0x0000, 0, 0), + + MX6_PAD_LCD1_DATA06__LCDIF1_DATA_6 = IOMUX_PAD(0x0430, 0x00E8, 0, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA06__WEIM_EB_B_2 = IOMUX_PAD(0x0430, 0x00E8, 1, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA06__KITTEN_TRACE_6 = IOMUX_PAD(0x0430, 0x00E8, 3, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA06__CSI1_PIXCLK = IOMUX_PAD(0x0430, 0x00E8, 4, 0x0704, 1, 0), + MX6_PAD_LCD1_DATA06__GPIO3_IO_7 = IOMUX_PAD(0x0430, 0x00E8, 5, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA06__SRC_BT_CFG_6 = IOMUX_PAD(0x0430, 0x00E8, 6, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA06__SIM_M_HADDR_27 = IOMUX_PAD(0x0430, 0x00E8, 7, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA06__VADC_TEST_11 = IOMUX_PAD(0x0430, 0x00E8, 8, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA06__MMDC_DEBUG_11 = IOMUX_PAD(0x0430, 0x00E8, 9, 0x0000, 0, 0), + + MX6_PAD_LCD1_DATA07__LCDIF1_DATA_7 = IOMUX_PAD(0x0434, 0x00EC, 0, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA07__WEIM_EB_B_3 = IOMUX_PAD(0x0434, 0x00EC, 1, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA07__KITTEN_TRACE_7 = IOMUX_PAD(0x0434, 0x00EC, 3, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA07__CSI1_MCLK = IOMUX_PAD(0x0434, 0x00EC, 4, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA07__GPIO3_IO_8 = IOMUX_PAD(0x0434, 0x00EC, 5, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA07__SRC_BT_CFG_7 = IOMUX_PAD(0x0434, 0x00EC, 6, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA07__SIM_M_HADDR_28 = IOMUX_PAD(0x0434, 0x00EC, 7, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA07__VADC_TEST_12 = IOMUX_PAD(0x0434, 0x00EC, 8, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA07__MMDC_DEBUG_12 = IOMUX_PAD(0x0434, 0x00EC, 9, 0x0000, 0, 0), + + MX6_PAD_LCD1_DATA08__LCDIF1_DATA_8 = IOMUX_PAD(0x0438, 0x00F0, 0, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA08__WEIM_AD_8 = IOMUX_PAD(0x0438, 0x00F0, 1, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA08__KITTEN_TRACE_8 = IOMUX_PAD(0x0438, 0x00F0, 3, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA08__CSI1_DATA_9 = IOMUX_PAD(0x0438, 0x00F0, 4, 0x06C4, 1, 0), + MX6_PAD_LCD1_DATA08__GPIO3_IO_9 = IOMUX_PAD(0x0438, 0x00F0, 5, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA08__SRC_BT_CFG_8 = IOMUX_PAD(0x0438, 0x00F0, 6, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA08__SIM_M_HADDR_29 = IOMUX_PAD(0x0438, 0x00F0, 7, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA08__VADC_TEST_13 = IOMUX_PAD(0x0438, 0x00F0, 8, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA08__MMDC_DEBUG_13 = IOMUX_PAD(0x0438, 0x00F0, 9, 0x0000, 0, 0), + + MX6_PAD_LCD1_DATA09__LCDIF1_DATA_9 = IOMUX_PAD(0x043C, 0x00F4, 0, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA09__WEIM_AD_9 = IOMUX_PAD(0x043C, 0x00F4, 1, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA09__KITTEN_TRACE_9 = IOMUX_PAD(0x043C, 0x00F4, 3, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA09__CSI1_DATA_8 = IOMUX_PAD(0x043C, 0x00F4, 4, 0x06C0, 1, 0), + MX6_PAD_LCD1_DATA09__GPIO3_IO_10 = IOMUX_PAD(0x043C, 0x00F4, 5, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA09__SRC_BT_CFG_9 = IOMUX_PAD(0x043C, 0x00F4, 6, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA09__SIM_M_HADDR_30 = IOMUX_PAD(0x043C, 0x00F4, 7, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA09__VADC_TEST_14 = IOMUX_PAD(0x043C, 0x00F4, 8, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA09__MMDC_DEBUG_14 = IOMUX_PAD(0x043C, 0x00F4, 9, 0x0000, 0, 0), + + MX6_PAD_LCD1_DATA10__LCDIF1_DATA_10 = IOMUX_PAD(0x0440, 0x00F8, 0, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA10__WEIM_AD_10 = IOMUX_PAD(0x0440, 0x00F8, 1, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA10__KITTEN_TRACE_10 = IOMUX_PAD(0x0440, 0x00F8, 3, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA10__CSI1_DATA_7 = IOMUX_PAD(0x0440, 0x00F8, 4, 0x06BC, 1, 0), + MX6_PAD_LCD1_DATA10__GPIO3_IO_11 = IOMUX_PAD(0x0440, 0x00F8, 5, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA10__SRC_BT_CFG_10 = IOMUX_PAD(0x0440, 0x00F8, 6, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA10__SIM_M_HADDR_31 = IOMUX_PAD(0x0440, 0x00F8, 7, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA10__VADC_TEST_15 = IOMUX_PAD(0x0440, 0x00F8, 8, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA10__MMDC_DEBUG_15 = IOMUX_PAD(0x0440, 0x00F8, 9, 0x0000, 0, 0), + + MX6_PAD_LCD1_DATA11__LCDIF1_DATA_11 = IOMUX_PAD(0x0444, 0x00FC, 0, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA11__WEIM_AD_11 = IOMUX_PAD(0x0444, 0x00FC, 1, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA11__KITTEN_TRACE_11 = IOMUX_PAD(0x0444, 0x00FC, 3, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA11__CSI1_DATA_6 = IOMUX_PAD(0x0444, 0x00FC, 4, 0x06B8, 1, 0), + MX6_PAD_LCD1_DATA11__GPIO3_IO_12 = IOMUX_PAD(0x0444, 0x00FC, 5, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA11__SRC_BT_CFG_11 = IOMUX_PAD(0x0444, 0x00FC, 6, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA11__SIM_M_HBURST_0 = IOMUX_PAD(0x0444, 0x00FC, 7, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA11__VADC_TEST_16 = IOMUX_PAD(0x0444, 0x00FC, 8, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA11__MMDC_DEBUG_16 = IOMUX_PAD(0x0444, 0x00FC, 9, 0x0000, 0, 0), + + MX6_PAD_LCD1_DATA12__LCDIF1_DATA_12 = IOMUX_PAD(0x0448, 0x0100, 0, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA12__WEIM_AD_12 = IOMUX_PAD(0x0448, 0x0100, 1, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA12__KITTEN_TRACE_12 = IOMUX_PAD(0x0448, 0x0100, 3, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA12__CSI1_DATA_5 = IOMUX_PAD(0x0448, 0x0100, 4, 0x06B4, 1, 0), + MX6_PAD_LCD1_DATA12__GPIO3_IO_13 = IOMUX_PAD(0x0448, 0x0100, 5, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA12__SRC_BT_CFG_12 = IOMUX_PAD(0x0448, 0x0100, 6, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA12__SIM_M_HBURST_1 = IOMUX_PAD(0x0448, 0x0100, 7, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA12__VADC_TEST_17 = IOMUX_PAD(0x0448, 0x0100, 8, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA12__MMDC_DEBUG_17 = IOMUX_PAD(0x0448, 0x0100, 9, 0x0000, 0, 0), + + MX6_PAD_LCD1_DATA13__LCDIF1_DATA_13 = IOMUX_PAD(0x044C, 0x0104, 0, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA13__WEIM_AD_13 = IOMUX_PAD(0x044C, 0x0104, 1, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA13__KITTEN_TRACE_13 = IOMUX_PAD(0x044C, 0x0104, 3, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA13__CSI1_DATA_4 = IOMUX_PAD(0x044C, 0x0104, 4, 0x06B0, 1, 0), + MX6_PAD_LCD1_DATA13__GPIO3_IO_14 = IOMUX_PAD(0x044C, 0x0104, 5, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA13__SRC_BT_CFG_13 = IOMUX_PAD(0x044C, 0x0104, 6, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA13__SIM_M_HBURST_2 = IOMUX_PAD(0x044C, 0x0104, 7, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA13__VADC_TEST_18 = IOMUX_PAD(0x044C, 0x0104, 8, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA13__MMDC_DEBUG_18 = IOMUX_PAD(0x044C, 0x0104, 9, 0x0000, 0, 0), + + MX6_PAD_LCD1_DATA14__LCDIF1_DATA_14 = IOMUX_PAD(0x0450, 0x0108, 0, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA14__WEIM_AD_14 = IOMUX_PAD(0x0450, 0x0108, 1, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA14__KITTEN_TRACE_14 = IOMUX_PAD(0x0450, 0x0108, 3, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA14__CSI1_DATA_3 = IOMUX_PAD(0x0450, 0x0108, 4, 0x06AC, 1, 0), + MX6_PAD_LCD1_DATA14__GPIO3_IO_15 = IOMUX_PAD(0x0450, 0x0108, 5, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA14__SRC_BT_CFG_14 = IOMUX_PAD(0x0450, 0x0108, 6, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA14__SIM_M_HMASTLOCK = IOMUX_PAD(0x0450, 0x0108, 7, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA14__VADC_TEST_19 = IOMUX_PAD(0x0450, 0x0108, 8, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA14__MMDC_DEBUG_19 = IOMUX_PAD(0x0450, 0x0108, 9, 0x0000, 0, 0), + + MX6_PAD_LCD1_DATA15__LCDIF1_DATA_15 = IOMUX_PAD(0x0454, 0x010C, 0, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA15__WEIM_AD_15 = IOMUX_PAD(0x0454, 0x010C, 1, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA15__KITTEN_TRACE_15 = IOMUX_PAD(0x0454, 0x010C, 3, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA15__CSI1_DATA_2 = IOMUX_PAD(0x0454, 0x010C, 4, 0x06A8, 1, 0), + MX6_PAD_LCD1_DATA15__GPIO3_IO_16 = IOMUX_PAD(0x0454, 0x010C, 5, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA15__SRC_BT_CFG_15 = IOMUX_PAD(0x0454, 0x010C, 6, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA15__SIM_M_HPROT_0 = IOMUX_PAD(0x0454, 0x010C, 7, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA15__VDEC_DEBUG_0 = IOMUX_PAD(0x0454, 0x010C, 8, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA15__MMDC_DEBUG_20 = IOMUX_PAD(0x0454, 0x010C, 9, 0x0000, 0, 0), + + MX6_PAD_LCD1_DATA16__LCDIF1_DATA_16 = IOMUX_PAD(0x0458, 0x0110, 0, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA16__WEIM_ADDR_16 = IOMUX_PAD(0x0458, 0x0110, 1, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA16__M4_TRACE_CLK = IOMUX_PAD(0x0458, 0x0110, 2, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA16__KITTEN_TRACE_CLK = IOMUX_PAD(0x0458, 0x0110, 3, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA16__CSI1_DATA_1 = IOMUX_PAD(0x0458, 0x0110, 4, 0x06A4, 0, 0), + MX6_PAD_LCD1_DATA16__GPIO3_IO_17 = IOMUX_PAD(0x0458, 0x0110, 5, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA16__SRC_BT_CFG_24 = IOMUX_PAD(0x0458, 0x0110, 6, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA16__SIM_M_HPROT_1 = IOMUX_PAD(0x0458, 0x0110, 7, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA16__VDEC_DEBUG_1 = IOMUX_PAD(0x0458, 0x0110, 8, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA16__MMDC_DEBUG_21 = IOMUX_PAD(0x0458, 0x0110, 9, 0x0000, 0, 0), + + MX6_PAD_LCD1_DATA17__LCDIF1_DATA_17 = IOMUX_PAD(0x045C, 0x0114, 0, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA17__WEIM_ADDR_17 = IOMUX_PAD(0x045C, 0x0114, 1, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA17__KITTEN_TRACE_CTL = IOMUX_PAD(0x045C, 0x0114, 3, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA17__CSI1_DATA_0 = IOMUX_PAD(0x045C, 0x0114, 4, 0x06A0, 0, 0), + MX6_PAD_LCD1_DATA17__GPIO3_IO_18 = IOMUX_PAD(0x045C, 0x0114, 5, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA17__SRC_BT_CFG_25 = IOMUX_PAD(0x045C, 0x0114, 6, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA17__SIM_M_HPROT_2 = IOMUX_PAD(0x045C, 0x0114, 7, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA17__VDEC_DEBUG_2 = IOMUX_PAD(0x045C, 0x0114, 8, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA17__MMDC_DEBUG_22 = IOMUX_PAD(0x045C, 0x0114, 9, 0x0000, 0, 0), + + MX6_PAD_LCD1_DATA18__LCDIF1_DATA_18 = IOMUX_PAD(0x0460, 0x0118, 0, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA18__WEIM_ADDR_18 = IOMUX_PAD(0x0460, 0x0118, 1, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA18__M4_EVENTO = IOMUX_PAD(0x0460, 0x0118, 2, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA18__KITTEN_EVENTO = IOMUX_PAD(0x0460, 0x0118, 3, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA18__CSI1_DATA_15 = IOMUX_PAD(0x0460, 0x0118, 4, 0x06D8, 0, 0), + MX6_PAD_LCD1_DATA18__GPIO3_IO_19 = IOMUX_PAD(0x0460, 0x0118, 5, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA18__SRC_BT_CFG_26 = IOMUX_PAD(0x0460, 0x0118, 6, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA18__SIM_M_HPROT_3 = IOMUX_PAD(0x0460, 0x0118, 7, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA18__VDEC_DEBUG_3 = IOMUX_PAD(0x0460, 0x0118, 8, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA18__MMDC_DEBUG_23 = IOMUX_PAD(0x0460, 0x0118, 9, 0x0000, 0, 0), + + MX6_PAD_LCD1_DATA19__LCDIF1_DATA_19 = IOMUX_PAD(0x0464, 0x011C, 0, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA19__WEIM_ADDR_19 = IOMUX_PAD(0x0464, 0x011C, 1, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA19__M4_TRACE_SWO = IOMUX_PAD(0x0464, 0x011C, 2, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA19__CSI1_DATA_14 = IOMUX_PAD(0x0464, 0x011C, 4, 0x06D4, 0, 0), + MX6_PAD_LCD1_DATA19__GPIO3_IO_20 = IOMUX_PAD(0x0464, 0x011C, 5, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA19__SRC_BT_CFG_27 = IOMUX_PAD(0x0464, 0x011C, 6, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA19__SIM_M_HREADYOUT = IOMUX_PAD(0x0464, 0x011C, 7, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA19__VDEC_DEBUG_4 = IOMUX_PAD(0x0464, 0x011C, 8, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA19__MMDC_DEBUG_24 = IOMUX_PAD(0x0464, 0x011C, 9, 0x0000, 0, 0), + + MX6_PAD_LCD1_DATA20__LCDIF1_DATA_20 = IOMUX_PAD(0x0468, 0x0120, 0, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA20__WEIM_ADDR_20 = IOMUX_PAD(0x0468, 0x0120, 1, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA20__PWM8_OUT = IOMUX_PAD(0x0468, 0x0120, 2, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA20__ENET1_1588_EVENT2_OUT = IOMUX_PAD(0x0468, 0x0120, 3, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA20__CSI1_DATA_13 = IOMUX_PAD(0x0468, 0x0120, 4, 0x06D0, 0, 0), + MX6_PAD_LCD1_DATA20__GPIO3_IO_21 = IOMUX_PAD(0x0468, 0x0120, 5, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA20__SRC_BT_CFG_28 = IOMUX_PAD(0x0468, 0x0120, 6, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA20__SIM_M_HRESP = IOMUX_PAD(0x0468, 0x0120, 7, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA20__VDEC_DEBUG_5 = IOMUX_PAD(0x0468, 0x0120, 8, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA20__MMDC_DEBUG_25 = IOMUX_PAD(0x0468, 0x0120, 9, 0x0000, 0, 0), + + MX6_PAD_LCD1_DATA21__LCDIF1_DATA_21 = IOMUX_PAD(0x046C, 0x0124, 0, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA21__WEIM_ADDR_21 = IOMUX_PAD(0x046C, 0x0124, 1, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA21__PWM7_OUT = IOMUX_PAD(0x046C, 0x0124, 2, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA21__ENET1_1588_EVENT3_OUT = IOMUX_PAD(0x046C, 0x0124, 3, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA21__CSI1_DATA_12 = IOMUX_PAD(0x046C, 0x0124, 4, 0x06CC, 0, 0), + MX6_PAD_LCD1_DATA21__GPIO3_IO_22 = IOMUX_PAD(0x046C, 0x0124, 5, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA21__SRC_BT_CFG_29 = IOMUX_PAD(0x046C, 0x0124, 6, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA21__SIM_M_HSIZE_0 = IOMUX_PAD(0x046C, 0x0124, 7, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA21__VDEC_DEBUG_6 = IOMUX_PAD(0x046C, 0x0124, 8, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA21__MMDC_DEBUG_26 = IOMUX_PAD(0x046C, 0x0124, 9, 0x0000, 0, 0), + + MX6_PAD_LCD1_DATA22__LCDIF1_DATA_22 = IOMUX_PAD(0x0470, 0x0128, 0, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA22__WEIM_ADDR_22 = IOMUX_PAD(0x0470, 0x0128, 1, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA22__PWM6_OUT = IOMUX_PAD(0x0470, 0x0128, 2, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA22__ENET2_1588_EVENT2_OUT = IOMUX_PAD(0x0470, 0x0128, 3, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA22__CSI1_DATA_11 = IOMUX_PAD(0x0470, 0x0128, 4, 0x06C8, 0, 0), + MX6_PAD_LCD1_DATA22__GPIO3_IO_23 = IOMUX_PAD(0x0470, 0x0128, 5, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA22__SRC_BT_CFG_30 = IOMUX_PAD(0x0470, 0x0128, 6, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA22__SIM_M_HSIZE_1 = IOMUX_PAD(0x0470, 0x0128, 7, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA22__VDEC_DEBUG_7 = IOMUX_PAD(0x0470, 0x0128, 8, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA22__MMDC_DEBUG_27 = IOMUX_PAD(0x0470, 0x0128, 9, 0x0000, 0, 0), + + MX6_PAD_LCD1_DATA23__LCDIF1_DATA_23 = IOMUX_PAD(0x0474, 0x012C, 0, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA23__WEIM_ADDR_23 = IOMUX_PAD(0x0474, 0x012C, 1, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA23__PWM5_OUT = IOMUX_PAD(0x0474, 0x012C, 2, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA23__ENET2_1588_EVENT3_OUT = IOMUX_PAD(0x0474, 0x012C, 3, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA23__CSI1_DATA_10 = IOMUX_PAD(0x0474, 0x012C, 4, 0x06FC, 0, 0), + MX6_PAD_LCD1_DATA23__GPIO3_IO_24 = IOMUX_PAD(0x0474, 0x012C, 5, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA23__SRC_BT_CFG_31 = IOMUX_PAD(0x0474, 0x012C, 6, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA23__SIM_M_HSIZE_2 = IOMUX_PAD(0x0474, 0x012C, 7, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA23__VDEC_DEBUG_8 = IOMUX_PAD(0x0474, 0x012C, 8, 0x0000, 0, 0), + MX6_PAD_LCD1_DATA23__MMDC_DEBUG_28 = IOMUX_PAD(0x0474, 0x012C, 9, 0x0000, 0, 0), + + MX6_PAD_LCD1_ENABLE__LCDIF1_ENABLE = IOMUX_PAD(0x0478, 0x0130, 0, 0x0000, 0, 0), + MX6_PAD_LCD1_ENABLE__LCDIF1_RD_E = IOMUX_PAD(0x0478, 0x0130, 1, 0x0000, 0, 0), + MX6_PAD_LCD1_ENABLE__AUDMUX_AUD3_TXC = IOMUX_PAD(0x0478, 0x0130, 2, 0x063C, 1, 0), + MX6_PAD_LCD1_ENABLE__ENET1_1588_EVENT3_IN = IOMUX_PAD(0x0478, 0x0130, 3, 0x0000, 0, 0), + MX6_PAD_LCD1_ENABLE__CSI1_DATA_17 = IOMUX_PAD(0x0478, 0x0130, 4, 0x06E0, 0, 0), + MX6_PAD_LCD1_ENABLE__GPIO3_IO_25 = IOMUX_PAD(0x0478, 0x0130, 5, 0x0000, 0, 0), + MX6_PAD_LCD1_ENABLE__USDHC1_CD_B = IOMUX_PAD(0x0478, 0x0130, 6, 0x0864, 0, 0), + MX6_PAD_LCD1_ENABLE__SIM_M_HADDR_17 = IOMUX_PAD(0x0478, 0x0130, 7, 0x0000, 0, 0), + MX6_PAD_LCD1_ENABLE__VADC_TEST_1 = IOMUX_PAD(0x0478, 0x0130, 8, 0x0000, 0, 0), + MX6_PAD_LCD1_ENABLE__MMDC_DEBUG_1 = IOMUX_PAD(0x0478, 0x0130, 9, 0x0000, 0, 0), + + MX6_PAD_LCD1_HSYNC__LCDIF1_HSYNC = IOMUX_PAD(0x047C, 0x0134, 0, 0x07E0, 0, 0), + MX6_PAD_LCD1_HSYNC__LCDIF1_RS = IOMUX_PAD(0x047C, 0x0134, 1, 0x0000, 0, 0), + MX6_PAD_LCD1_HSYNC__AUDMUX_AUD3_TXD = IOMUX_PAD(0x047C, 0x0134, 2, 0x0630, 1, 0), + MX6_PAD_LCD1_HSYNC__ENET2_1588_EVENT2_IN = IOMUX_PAD(0x047C, 0x0134, 3, 0x0000, 0, 0), + MX6_PAD_LCD1_HSYNC__CSI1_DATA_18 = IOMUX_PAD(0x047C, 0x0134, 4, 0x06E4, 0, 0), + MX6_PAD_LCD1_HSYNC__GPIO3_IO_26 = IOMUX_PAD(0x047C, 0x0134, 5, 0x0000, 0, 0), + MX6_PAD_LCD1_HSYNC__USDHC2_WP = IOMUX_PAD(0x047C, 0x0134, 6, 0x0870, 0, 0), + MX6_PAD_LCD1_HSYNC__SIM_M_HADDR_18 = IOMUX_PAD(0x047C, 0x0134, 7, 0x0000, 0, 0), + MX6_PAD_LCD1_HSYNC__VADC_TEST_2 = IOMUX_PAD(0x047C, 0x0134, 8, 0x0000, 0, 0), + MX6_PAD_LCD1_HSYNC__MMDC_DEBUG_2 = IOMUX_PAD(0x047C, 0x0134, 9, 0x0000, 0, 0), + + MX6_PAD_LCD1_RESET__LCDIF1_RESET = IOMUX_PAD(0x0480, 0x0138, 0, 0x0000, 0, 0), + MX6_PAD_LCD1_RESET__LCDIF1_CS = IOMUX_PAD(0x0480, 0x0138, 1, 0x0000, 0, 0), + MX6_PAD_LCD1_RESET__AUDMUX_AUD3_RXD = IOMUX_PAD(0x0480, 0x0138, 2, 0x062C, 1, 0), + MX6_PAD_LCD1_RESET__KITTEN_EVENTI = IOMUX_PAD(0x0480, 0x0138, 3, 0x0000, 0, 0), + MX6_PAD_LCD1_RESET__M4_EVENTI = IOMUX_PAD(0x0480, 0x0138, 4, 0x0000, 0, 0), + MX6_PAD_LCD1_RESET__GPIO3_IO_27 = IOMUX_PAD(0x0480, 0x0138, 5, 0x0000, 0, 0), + MX6_PAD_LCD1_RESET__CCM_PMIC_RDY = IOMUX_PAD(0x0480, 0x0138, 6, 0x069C, 0, 0), + MX6_PAD_LCD1_RESET__SIM_M_HADDR_20 = IOMUX_PAD(0x0480, 0x0138, 7, 0x0000, 0, 0), + MX6_PAD_LCD1_RESET__VADC_TEST_4 = IOMUX_PAD(0x0480, 0x0138, 8, 0x0000, 0, 0), + MX6_PAD_LCD1_RESET__MMDC_DEBUG_4 = IOMUX_PAD(0x0480, 0x0138, 9, 0x0000, 0, 0), + + MX6_PAD_LCD1_VSYNC__LCDIF1_VSYNC = IOMUX_PAD(0x0484, 0x013C, 0, 0x0000, 0, 0), + MX6_PAD_LCD1_VSYNC__LCDIF1_BUSY = IOMUX_PAD(0x0484, 0x013C, 1, 0x07E0, 1, 0), + MX6_PAD_LCD1_VSYNC__AUDMUX_AUD3_TXFS = IOMUX_PAD(0x0484, 0x013C, 2, 0x0640, 1, 0), + MX6_PAD_LCD1_VSYNC__ENET2_1588_EVENT3_IN = IOMUX_PAD(0x0484, 0x013C, 3, 0x0000, 0, 0), + MX6_PAD_LCD1_VSYNC__CSI1_DATA_19 = IOMUX_PAD(0x0484, 0x013C, 4, 0x06E8, 0, 0), + MX6_PAD_LCD1_VSYNC__GPIO3_IO_28 = IOMUX_PAD(0x0484, 0x013C, 5, 0x0000, 0, 0), + MX6_PAD_LCD1_VSYNC__USDHC2_CD_B = IOMUX_PAD(0x0484, 0x013C, 6, 0x086C, 0, 0), + MX6_PAD_LCD1_VSYNC__SIM_M_HADDR_19 = IOMUX_PAD(0x0484, 0x013C, 7, 0x0000, 0, 0), + MX6_PAD_LCD1_VSYNC__VADC_TEST_3 = IOMUX_PAD(0x0484, 0x013C, 8, 0x0000, 0, 0), + MX6_PAD_LCD1_VSYNC__MMDC_DEBUG_3 = IOMUX_PAD(0x0484, 0x013C, 9, 0x0000, 0, 0), + + MX6_PAD_NAND_ALE__RAWNAND_ALE = IOMUX_PAD(0x0488, 0x0140, 0, 0x0000, 0, 0), + MX6_PAD_NAND_ALE__I2C3_SDA = IOMUX_PAD(0x0488, 0x0140, 1, 0x07BC, 0, 0), + MX6_PAD_NAND_ALE__QSPI2_A_SS0_B = IOMUX_PAD(0x0488, 0x0140, 2, 0x0000, 0, 0), + MX6_PAD_NAND_ALE__ECSPI2_SS0 = IOMUX_PAD(0x0488, 0x0140, 3, 0x072C, 0, 0), + MX6_PAD_NAND_ALE__ESAI_TX3_RX2 = IOMUX_PAD(0x0488, 0x0140, 4, 0x079C, 0, 0), + MX6_PAD_NAND_ALE__GPIO4_IO_0 = IOMUX_PAD(0x0488, 0x0140, 5, 0x0000, 0, 0), + MX6_PAD_NAND_ALE__WEIM_CS0_B = IOMUX_PAD(0x0488, 0x0140, 6, 0x0000, 0, 0), + MX6_PAD_NAND_ALE__TPSMP_HDATA_0 = IOMUX_PAD(0x0488, 0x0140, 7, 0x0000, 0, 0), + MX6_PAD_NAND_ALE__ANATOP_USBPHY1_TSTI_TX_EN = IOMUX_PAD(0x0488, 0x0140, 8, 0x0000, 0, 0), + MX6_PAD_NAND_ALE__SDMA_DEBUG_PC_12 = IOMUX_PAD(0x0488, 0x0140, 9, 0x0000, 0, 0), + + MX6_PAD_NAND_CE0_B__RAWNAND_CE0_B = IOMUX_PAD(0x048C, 0x0144, 0, 0x0000, 0, 0), + MX6_PAD_NAND_CE0_B__USDHC2_VSELECT = IOMUX_PAD(0x048C, 0x0144, 1, 0x0000, 0, 0), + MX6_PAD_NAND_CE0_B__QSPI2_A_DATA_2 = IOMUX_PAD(0x048C, 0x0144, 2, 0x0000, 0, 0), + MX6_PAD_NAND_CE0_B__AUDMUX_AUD4_TXC = IOMUX_PAD(0x048C, 0x0144, 3, 0x0654, 0, 0), + MX6_PAD_NAND_CE0_B__ESAI_TX_CLK = IOMUX_PAD(0x048C, 0x0144, 4, 0x078C, 0, 0), + MX6_PAD_NAND_CE0_B__GPIO4_IO_1 = IOMUX_PAD(0x048C, 0x0144, 5, 0x0000, 0, 0), + MX6_PAD_NAND_CE0_B__WEIM_LBA_B = IOMUX_PAD(0x048C, 0x0144, 6, 0x0000, 0, 0), + MX6_PAD_NAND_CE0_B__TPSMP_HDATA_3 = IOMUX_PAD(0x048C, 0x0144, 7, 0x0000, 0, 0), + MX6_PAD_NAND_CE0_B__ANATOP_USBPHY1_TSTI_TX_HIZ = IOMUX_PAD(0x048C, 0x0144, 8, 0x0000, 0, 0), + MX6_PAD_NAND_CE0_B__SDMA_DEBUG_PC_9 = IOMUX_PAD(0x048C, 0x0144, 9, 0x0000, 0, 0), + + MX6_PAD_NAND_CE1_B__RAWNAND_CE1_B = IOMUX_PAD(0x0490, 0x0148, 0, 0x0000, 0, 0), + MX6_PAD_NAND_CE1_B__USDHC3_RESET_B = IOMUX_PAD(0x0490, 0x0148, 1, 0x0000, 0, 0), + MX6_PAD_NAND_CE1_B__QSPI2_A_DATA_3 = IOMUX_PAD(0x0490, 0x0148, 2, 0x0000, 0, 0), + MX6_PAD_NAND_CE1_B__AUDMUX_AUD4_TXD = IOMUX_PAD(0x0490, 0x0148, 3, 0x0648, 0, 0), + MX6_PAD_NAND_CE1_B__ESAI_TX0 = IOMUX_PAD(0x0490, 0x0148, 4, 0x0790, 0, 0), + MX6_PAD_NAND_CE1_B__GPIO4_IO_2 = IOMUX_PAD(0x0490, 0x0148, 5, 0x0000, 0, 0), + MX6_PAD_NAND_CE1_B__WEIM_OE = IOMUX_PAD(0x0490, 0x0148, 6, 0x0000, 0, 0), + MX6_PAD_NAND_CE1_B__TPSMP_HDATA_4 = IOMUX_PAD(0x0490, 0x0148, 7, 0x0000, 0, 0), + MX6_PAD_NAND_CE1_B__ANATOP_USBPHY1_TSTI_TX_LS_MODE = IOMUX_PAD(0x0490, 0x0148, 8, 0x0000, 0, 0), + MX6_PAD_NAND_CE1_B__SDMA_DEBUG_PC_8 = IOMUX_PAD(0x0490, 0x0148, 9, 0x0000, 0, 0), + + MX6_PAD_NAND_CLE__RAWNAND_CLE = IOMUX_PAD(0x0494, 0x014C, 0, 0x0000, 0, 0), + MX6_PAD_NAND_CLE__I2C3_SCL = IOMUX_PAD(0x0494, 0x014C, 1, 0x07B8, 0, 0), + MX6_PAD_NAND_CLE__QSPI2_A_SCLK = IOMUX_PAD(0x0494, 0x014C, 2, 0x0000, 0, 0), + MX6_PAD_NAND_CLE__ECSPI2_SCLK = IOMUX_PAD(0x0494, 0x014C, 3, 0x0720, 0, 0), + MX6_PAD_NAND_CLE__ESAI_TX2_RX3 = IOMUX_PAD(0x0494, 0x014C, 4, 0x0798, 0, 0), + MX6_PAD_NAND_CLE__GPIO4_IO_3 = IOMUX_PAD(0x0494, 0x014C, 5, 0x0000, 0, 0), + MX6_PAD_NAND_CLE__WEIM_BCLK = IOMUX_PAD(0x0494, 0x014C, 6, 0x0000, 0, 0), + MX6_PAD_NAND_CLE__TPSMP_CLK = IOMUX_PAD(0x0494, 0x014C, 7, 0x0000, 0, 0), + MX6_PAD_NAND_CLE__ANATOP_USBPHY1_TSTI_TX_DP = IOMUX_PAD(0x0494, 0x014C, 8, 0x0000, 0, 0), + MX6_PAD_NAND_CLE__SDMA_DEBUG_PC_13 = IOMUX_PAD(0x0494, 0x014C, 9, 0x0000, 0, 0), + + MX6_PAD_NAND_DATA00__RAWNAND_DATA00 = IOMUX_PAD(0x0498, 0x0150, 0, 0x0000, 0, 0), + MX6_PAD_NAND_DATA00__USDHC1_DATA4 = IOMUX_PAD(0x0498, 0x0150, 1, 0x0000, 0, 0), + MX6_PAD_NAND_DATA00__QSPI2_B_DATA_1 = IOMUX_PAD(0x0498, 0x0150, 2, 0x0000, 0, 0), + MX6_PAD_NAND_DATA00__ECSPI5_MISO = IOMUX_PAD(0x0498, 0x0150, 3, 0x0754, 0, 0), + MX6_PAD_NAND_DATA00__ESAI_RX_CLK = IOMUX_PAD(0x0498, 0x0150, 4, 0x0788, 0, 0), + MX6_PAD_NAND_DATA00__GPIO4_IO_4 = IOMUX_PAD(0x0498, 0x0150, 5, 0x0000, 0, 0), + MX6_PAD_NAND_DATA00__WEIM_AD_0 = IOMUX_PAD(0x0498, 0x0150, 6, 0x0000, 0, 0), + MX6_PAD_NAND_DATA00__TPSMP_HDATA_7 = IOMUX_PAD(0x0498, 0x0150, 7, 0x0000, 0, 0), + MX6_PAD_NAND_DATA00__ANATOP_USBPHY1_TSTO_RX_DISCON_DET = IOMUX_PAD(0x0498, 0x0150, 8, 0x0000, 0, 0), + MX6_PAD_NAND_DATA00__SDMA_DEBUG_EVT_CHN_LINES_5 = IOMUX_PAD(0x0498, 0x0150, 9, 0x0000, 0, 0), + + MX6_PAD_NAND_DATA01__RAWNAND_DATA01 = IOMUX_PAD(0x049C, 0x0154, 0, 0x0000, 0, 0), + MX6_PAD_NAND_DATA01__USDHC1_DATA5 = IOMUX_PAD(0x049C, 0x0154, 1, 0x0000, 0, 0), + MX6_PAD_NAND_DATA01__QSPI2_B_DATA_0 = IOMUX_PAD(0x049C, 0x0154, 2, 0x0000, 0, 0), + MX6_PAD_NAND_DATA01__ECSPI5_MOSI = IOMUX_PAD(0x049C, 0x0154, 3, 0x0758, 0, 0), + MX6_PAD_NAND_DATA01__ESAI_RX_FS = IOMUX_PAD(0x049C, 0x0154, 4, 0x0778, 0, 0), + MX6_PAD_NAND_DATA01__GPIO4_IO_5 = IOMUX_PAD(0x049C, 0x0154, 5, 0x0000, 0, 0), + MX6_PAD_NAND_DATA01__WEIM_AD_1 = IOMUX_PAD(0x049C, 0x0154, 6, 0x0000, 0, 0), + MX6_PAD_NAND_DATA01__TPSMP_HDATA_8 = IOMUX_PAD(0x049C, 0x0154, 7, 0x0000, 0, 0), + MX6_PAD_NAND_DATA01__ANATOP_USBPHY1_TSTO_RX_HS_RXD = IOMUX_PAD(0x049C, 0x0154, 8, 0x0000, 0, 0), + MX6_PAD_NAND_DATA01__SDMA_DEBUG_EVT_CHN_LINES_4 = IOMUX_PAD(0x049C, 0x0154, 9, 0x0000, 0, 0), + + MX6_PAD_NAND_DATA02__RAWNAND_DATA02 = IOMUX_PAD(0x04A0, 0x0158, 0, 0x0000, 0, 0), + MX6_PAD_NAND_DATA02__USDHC1_DATA6 = IOMUX_PAD(0x04A0, 0x0158, 1, 0x0000, 0, 0), + MX6_PAD_NAND_DATA02__QSPI2_B_SCLK = IOMUX_PAD(0x04A0, 0x0158, 2, 0x0000, 0, 0), + MX6_PAD_NAND_DATA02__ECSPI5_SCLK = IOMUX_PAD(0x04A0, 0x0158, 3, 0x0750, 0, 0), + MX6_PAD_NAND_DATA02__ESAI_TX_HF_CLK = IOMUX_PAD(0x04A0, 0x0158, 4, 0x0784, 0, 0), + MX6_PAD_NAND_DATA02__GPIO4_IO_6 = IOMUX_PAD(0x04A0, 0x0158, 5, 0x0000, 0, 0), + MX6_PAD_NAND_DATA02__WEIM_AD_2 = IOMUX_PAD(0x04A0, 0x0158, 6, 0x0000, 0, 0), + MX6_PAD_NAND_DATA02__TPSMP_HDATA_9 = IOMUX_PAD(0x04A0, 0x0158, 7, 0x0000, 0, 0), + MX6_PAD_NAND_DATA02__ANATOP_USBPHY2_TSTO_PLL_CLK20DIV = IOMUX_PAD(0x04A0, 0x0158, 8, 0x0000, 0, 0), + MX6_PAD_NAND_DATA02__SDMA_DEBUG_EVT_CHN_LINES_3 = IOMUX_PAD(0x04A0, 0x0158, 9, 0x0000, 0, 0), + + MX6_PAD_NAND_DATA03__RAWNAND_DATA03 = IOMUX_PAD(0x04A4, 0x015C, 0, 0x0000, 0, 0), + MX6_PAD_NAND_DATA03__USDHC1_DATA7 = IOMUX_PAD(0x04A4, 0x015C, 1, 0x0000, 0, 0), + MX6_PAD_NAND_DATA03__QSPI2_B_SS0_B = IOMUX_PAD(0x04A4, 0x015C, 2, 0x0000, 0, 0), + MX6_PAD_NAND_DATA03__ECSPI5_SS0 = IOMUX_PAD(0x04A4, 0x015C, 3, 0x075C, 0, 0), + MX6_PAD_NAND_DATA03__ESAI_RX_HF_CLK = IOMUX_PAD(0x04A4, 0x015C, 4, 0x0780, 0, 0), + MX6_PAD_NAND_DATA03__GPIO4_IO_7 = IOMUX_PAD(0x04A4, 0x015C, 5, 0x0000, 0, 0), + MX6_PAD_NAND_DATA03__WEIM_AD_3 = IOMUX_PAD(0x04A4, 0x015C, 6, 0x0000, 0, 0), + MX6_PAD_NAND_DATA03__TPSMP_HDATA_10 = IOMUX_PAD(0x04A4, 0x015C, 7, 0x0000, 0, 0), + MX6_PAD_NAND_DATA03__ANATOP_USBPHY1_TSTO_RX_SQUELCH = IOMUX_PAD(0x04A4, 0x015C, 8, 0x0000, 0, 0), + MX6_PAD_NAND_DATA03__SDMA_DEBUG_EVT_CHN_LINES_6 = IOMUX_PAD(0x04A4, 0x015C, 9, 0x0000, 0, 0), + + MX6_PAD_NAND_DATA04__RAWNAND_DATA04 = IOMUX_PAD(0x04A8, 0x0160, 0, 0x0000, 0, 0), + MX6_PAD_NAND_DATA04__USDHC2_DATA4 = IOMUX_PAD(0x04A8, 0x0160, 1, 0x0000, 0, 0), + MX6_PAD_NAND_DATA04__QSPI2_B_SS1_B = IOMUX_PAD(0x04A8, 0x0160, 2, 0x0000, 0, 0), + MX6_PAD_NAND_DATA04__UART3_RTS_B = IOMUX_PAD(0x04A8, 0x0160, 3, 0x083C, 0, 0), + MX6_PAD_NAND_DATA04__AUDMUX_AUD4_RXFS = IOMUX_PAD(0x04A8, 0x0160, 4, 0x0650, 0, 0), + MX6_PAD_NAND_DATA04__GPIO4_IO_8 = IOMUX_PAD(0x04A8, 0x0160, 5, 0x0000, 0, 0), + MX6_PAD_NAND_DATA04__WEIM_AD_4 = IOMUX_PAD(0x04A8, 0x0160, 6, 0x0000, 0, 0), + MX6_PAD_NAND_DATA04__TPSMP_HDATA_11 = IOMUX_PAD(0x04A8, 0x0160, 7, 0x0000, 0, 0), + MX6_PAD_NAND_DATA04__ANATOP_USBPHY2_TSTO_RX_SQUELCH = IOMUX_PAD(0x04A8, 0x0160, 8, 0x0000, 0, 0), + MX6_PAD_NAND_DATA04__SDMA_DEBUG_CORE_STATE_0 = IOMUX_PAD(0x04A8, 0x0160, 9, 0x0000, 0, 0), + + MX6_PAD_NAND_DATA05__RAWNAND_DATA05 = IOMUX_PAD(0x04AC, 0x0164, 0, 0x0000, 0, 0), + MX6_PAD_NAND_DATA05__USDHC2_DATA5 = IOMUX_PAD(0x04AC, 0x0164, 1, 0x0000, 0, 0), + MX6_PAD_NAND_DATA05__QSPI2_B_DQS = IOMUX_PAD(0x04AC, 0x0164, 2, 0x0000, 0, 0), + MX6_PAD_NAND_DATA05__UART3_CTS_B = IOMUX_PAD(0x04AC, 0x0164, 3, 0x083C, 1, 0), + MX6_PAD_NAND_DATA05__AUDMUX_AUD4_RXC = IOMUX_PAD(0x04AC, 0x0164, 4, 0x064C, 0, 0), + MX6_PAD_NAND_DATA05__GPIO4_IO_9 = IOMUX_PAD(0x04AC, 0x0164, 5, 0x0000, 0, 0), + MX6_PAD_NAND_DATA05__WEIM_AD_5 = IOMUX_PAD(0x04AC, 0x0164, 6, 0x0000, 0, 0), + MX6_PAD_NAND_DATA05__TPSMP_HDATA_12 = IOMUX_PAD(0x04AC, 0x0164, 7, 0x0000, 0, 0), + MX6_PAD_NAND_DATA05__ANATOP_USBPHY2_TSTO_RX_DISCON_DET = IOMUX_PAD(0x04AC, 0x0164, 8, 0x0000, 0, 0), + MX6_PAD_NAND_DATA05__SDMA_DEBUG_CORE_STATE_1 = IOMUX_PAD(0x04AC, 0x0164, 9, 0x0000, 0, 0), + + MX6_PAD_NAND_DATA06__RAWNAND_DATA06 = IOMUX_PAD(0x04B0, 0x0168, 0, 0x0000, 0, 0), + MX6_PAD_NAND_DATA06__USDHC2_DATA6 = IOMUX_PAD(0x04B0, 0x0168, 1, 0x0000, 0, 0), + MX6_PAD_NAND_DATA06__QSPI2_A_SS1_B = IOMUX_PAD(0x04B0, 0x0168, 2, 0x0000, 0, 0), + MX6_PAD_NAND_DATA06__UART3_RX = IOMUX_PAD(0x04B0, 0x0168, 3, 0x0840, 0, 0), + MX6_PAD_NAND_DATA06__PWM3_OUT = IOMUX_PAD(0x04B0, 0x0168, 4, 0x0000, 0, 0), + MX6_PAD_NAND_DATA06__GPIO4_IO_10 = IOMUX_PAD(0x04B0, 0x0168, 5, 0x0000, 0, 0), + MX6_PAD_NAND_DATA06__WEIM_AD_6 = IOMUX_PAD(0x04B0, 0x0168, 6, 0x0000, 0, 0), + MX6_PAD_NAND_DATA06__TPSMP_HDATA_13 = IOMUX_PAD(0x04B0, 0x0168, 7, 0x0000, 0, 0), + MX6_PAD_NAND_DATA06__ANATOP_USBPHY2_TSTO_RX_FS_RXD = IOMUX_PAD(0x04B0, 0x0168, 8, 0x0000, 0, 0), + MX6_PAD_NAND_DATA06__SDMA_DEBUG_CORE_STATE_2 = IOMUX_PAD(0x04B0, 0x0168, 9, 0x0000, 0, 0), + + MX6_PAD_NAND_DATA07__RAWNAND_DATA07 = IOMUX_PAD(0x04B4, 0x016C, 0, 0x0000, 0, 0), + MX6_PAD_NAND_DATA07__USDHC2_DATA7 = IOMUX_PAD(0x04B4, 0x016C, 1, 0x0000, 0, 0), + MX6_PAD_NAND_DATA07__QSPI2_A_DQS = IOMUX_PAD(0x04B4, 0x016C, 2, 0x0000, 0, 0), + MX6_PAD_NAND_DATA07__UART3_TX = IOMUX_PAD(0x04B4, 0x016C, 3, 0x0840, 1, 0), + MX6_PAD_NAND_DATA07__PWM4_OUT = IOMUX_PAD(0x04B4, 0x016C, 4, 0x0000, 0, 0), + MX6_PAD_NAND_DATA07__GPIO4_IO_11 = IOMUX_PAD(0x04B4, 0x016C, 5, 0x0000, 0, 0), + MX6_PAD_NAND_DATA07__WEIM_AD_7 = IOMUX_PAD(0x04B4, 0x016C, 6, 0x0000, 0, 0), + MX6_PAD_NAND_DATA07__TPSMP_HDATA_14 = IOMUX_PAD(0x04B4, 0x016C, 7, 0x0000, 0, 0), + MX6_PAD_NAND_DATA07__ANATOP_USBPHY1_TSTO_RX_FS_RXD = IOMUX_PAD(0x04B4, 0x016C, 8, 0x0000, 0, 0), + MX6_PAD_NAND_DATA07__SDMA_DEBUG_CORE_STATE_3 = IOMUX_PAD(0x04B4, 0x016C, 9, 0x0000, 0, 0), + + MX6_PAD_NAND_RE_B__RAWNAND_RE_B = IOMUX_PAD(0x04B8, 0x0170, 0, 0x0000, 0, 0), + MX6_PAD_NAND_RE_B__USDHC2_RESET_B = IOMUX_PAD(0x04B8, 0x0170, 1, 0x0000, 0, 0), + MX6_PAD_NAND_RE_B__QSPI2_B_DATA_3 = IOMUX_PAD(0x04B8, 0x0170, 2, 0x0000, 0, 0), + MX6_PAD_NAND_RE_B__AUDMUX_AUD4_TXFS = IOMUX_PAD(0x04B8, 0x0170, 3, 0x0658, 0, 0), + MX6_PAD_NAND_RE_B__ESAI_TX_FS = IOMUX_PAD(0x04B8, 0x0170, 4, 0x077C, 0, 0), + MX6_PAD_NAND_RE_B__GPIO4_IO_12 = IOMUX_PAD(0x04B8, 0x0170, 5, 0x0000, 0, 0), + MX6_PAD_NAND_RE_B__WEIM_RW = IOMUX_PAD(0x04B8, 0x0170, 6, 0x0000, 0, 0), + MX6_PAD_NAND_RE_B__TPSMP_HDATA_5 = IOMUX_PAD(0x04B8, 0x0170, 7, 0x0000, 0, 0), + MX6_PAD_NAND_RE_B__ANATOP_USBPHY2_TSTO_RX_HS_RXD = IOMUX_PAD(0x04B8, 0x0170, 8, 0x0000, 0, 0), + MX6_PAD_NAND_RE_B__SDMA_DEBUG_PC_7 = IOMUX_PAD(0x04B8, 0x0170, 9, 0x0000, 0, 0), + + MX6_PAD_NAND_READY_B__RAWNAND_READY_B = IOMUX_PAD(0x04BC, 0x0174, 0, 0x0000, 0, 0), + MX6_PAD_NAND_READY_B__USDHC1_VSELECT = IOMUX_PAD(0x04BC, 0x0174, 1, 0x0000, 0, 0), + MX6_PAD_NAND_READY_B__QSPI2_A_DATA_1 = IOMUX_PAD(0x04BC, 0x0174, 2, 0x0000, 0, 0), + MX6_PAD_NAND_READY_B__ECSPI2_MISO = IOMUX_PAD(0x04BC, 0x0174, 3, 0x0724, 0, 0), + MX6_PAD_NAND_READY_B__ESAI_TX1 = IOMUX_PAD(0x04BC, 0x0174, 4, 0x0794, 0, 0), + MX6_PAD_NAND_READY_B__GPIO4_IO_13 = IOMUX_PAD(0x04BC, 0x0174, 5, 0x0000, 0, 0), + MX6_PAD_NAND_READY_B__WEIM_EB_B_1 = IOMUX_PAD(0x04BC, 0x0174, 6, 0x0000, 0, 0), + MX6_PAD_NAND_READY_B__TPSMP_HDATA_2 = IOMUX_PAD(0x04BC, 0x0174, 7, 0x0000, 0, 0), + MX6_PAD_NAND_READY_B__ANATOP_USBPHY1_TSTI_TX_DN = IOMUX_PAD(0x04BC, 0x0174, 8, 0x0000, 0, 0), + MX6_PAD_NAND_READY_B__SDMA_DEBUG_PC_10 = IOMUX_PAD(0x04BC, 0x0174, 9, 0x0000, 0, 0), + + MX6_PAD_NAND_WE_B__RAWNAND_WE_B = IOMUX_PAD(0x04C0, 0x0178, 0, 0x0000, 0, 0), + MX6_PAD_NAND_WE_B__USDHC4_VSELECT = IOMUX_PAD(0x04C0, 0x0178, 1, 0x0000, 0, 0), + MX6_PAD_NAND_WE_B__QSPI2_B_DATA_2 = IOMUX_PAD(0x04C0, 0x0178, 2, 0x0000, 0, 0), + MX6_PAD_NAND_WE_B__AUDMUX_AUD4_RXD = IOMUX_PAD(0x04C0, 0x0178, 3, 0x0644, 0, 0), + MX6_PAD_NAND_WE_B__ESAI_TX5_RX0 = IOMUX_PAD(0x04C0, 0x0178, 4, 0x07A4, 0, 0), + MX6_PAD_NAND_WE_B__GPIO4_IO_14 = IOMUX_PAD(0x04C0, 0x0178, 5, 0x0000, 0, 0), + MX6_PAD_NAND_WE_B__WEIM_WAIT = IOMUX_PAD(0x04C0, 0x0178, 6, 0x0000, 0, 0), + MX6_PAD_NAND_WE_B__TPSMP_HDATA_6 = IOMUX_PAD(0x04C0, 0x0178, 7, 0x0000, 0, 0), + MX6_PAD_NAND_WE_B__ANATOP_USBPHY1_TSTO_PLL_CLK20DIV = IOMUX_PAD(0x04C0, 0x0178, 8, 0x0000, 0, 0), + MX6_PAD_NAND_WE_B__SDMA_DEBUG_PC_6 = IOMUX_PAD(0x04C0, 0x0178, 9, 0x0000, 0, 0), + + MX6_PAD_NAND_WP_B__RAWNAND_WP_B = IOMUX_PAD(0x04C4, 0x017C, 0, 0x0000, 0, 0), + MX6_PAD_NAND_WP_B__USDHC1_RESET_B = IOMUX_PAD(0x04C4, 0x017C, 1, 0x0000, 0, 0), + MX6_PAD_NAND_WP_B__QSPI2_A_DATA_0 = IOMUX_PAD(0x04C4, 0x017C, 2, 0x0000, 0, 0), + MX6_PAD_NAND_WP_B__ECSPI2_MOSI = IOMUX_PAD(0x04C4, 0x017C, 3, 0x0728, 0, 0), + MX6_PAD_NAND_WP_B__ESAI_TX4_RX1 = IOMUX_PAD(0x04C4, 0x017C, 4, 0x07A0, 0, 0), + MX6_PAD_NAND_WP_B__GPIO4_IO_15 = IOMUX_PAD(0x04C4, 0x017C, 5, 0x0000, 0, 0), + MX6_PAD_NAND_WP_B__WEIM_EB_B_0 = IOMUX_PAD(0x04C4, 0x017C, 6, 0x0000, 0, 0), + MX6_PAD_NAND_WP_B__TPSMP_HDATA_1 = IOMUX_PAD(0x04C4, 0x017C, 7, 0x0000, 0, 0), + MX6_PAD_NAND_WP_B__ANATOP_USBPHY1_TSTI_TX_HS_MODE = IOMUX_PAD(0x04C4, 0x017C, 8, 0x0000, 0, 0), + MX6_PAD_NAND_WP_B__SDMA_DEBUG_PC_11 = IOMUX_PAD(0x04C4, 0x017C, 9, 0x0000, 0, 0), + + MX6_PAD_QSPI1A_DATA0__QSPI1_A_DATA_0 = IOMUX_PAD(0x04C8, 0x0180, 0, 0x0000, 0, 0), + MX6_PAD_QSPI1A_DATA0__USB_OTG2_OC = IOMUX_PAD(0x04C8, 0x0180, 1, 0x085C, 2, 0), + MX6_PAD_QSPI1A_DATA0__ECSPI1_MOSI = IOMUX_PAD(0x04C8, 0x0180, 2, 0x0718, 1, 0), + MX6_PAD_QSPI1A_DATA0__ESAI_TX4_RX1 = IOMUX_PAD(0x04C8, 0x0180, 3, 0x07A0, 2, 0), + MX6_PAD_QSPI1A_DATA0__CSI1_DATA_14 = IOMUX_PAD(0x04C8, 0x0180, 4, 0x06D4, 1, 0), + MX6_PAD_QSPI1A_DATA0__GPIO4_IO_16 = IOMUX_PAD(0x04C8, 0x0180, 5, 0x0000, 0, 0), + MX6_PAD_QSPI1A_DATA0__WEIM_DATA_6 = IOMUX_PAD(0x04C8, 0x0180, 6, 0x0000, 0, 0), + MX6_PAD_QSPI1A_DATA0__SIM_M_HADDR_3 = IOMUX_PAD(0x04C8, 0x0180, 7, 0x0000, 0, 0), + MX6_PAD_QSPI1A_DATA0__SDMA_DEBUG_BUS_DEVICE_3 = IOMUX_PAD(0x04C8, 0x0180, 9, 0x0000, 0, 0), + + MX6_PAD_QSPI1A_DATA1__QSPI1_A_DATA_1 = IOMUX_PAD(0x04CC, 0x0184, 0, 0x0000, 0, 0), + MX6_PAD_QSPI1A_DATA1__ANATOP_OTG1_ID = IOMUX_PAD(0x04CC, 0x0184, 1, 0x0624, 2, 0), + MX6_PAD_QSPI1A_DATA1__ECSPI1_MISO = IOMUX_PAD(0x04CC, 0x0184, 2, 0x0714, 1, 0), + MX6_PAD_QSPI1A_DATA1__ESAI_TX1 = IOMUX_PAD(0x04CC, 0x0184, 3, 0x0794, 2, 0), + MX6_PAD_QSPI1A_DATA1__CSI1_DATA_13 = IOMUX_PAD(0x04CC, 0x0184, 4, 0x06D0, 1, 0), + MX6_PAD_QSPI1A_DATA1__GPIO4_IO_17 = IOMUX_PAD(0x04CC, 0x0184, 5, 0x0000, 0, 0), + MX6_PAD_QSPI1A_DATA1__WEIM_DATA_5 = IOMUX_PAD(0x04CC, 0x0184, 6, 0x0000, 0, 0), + MX6_PAD_QSPI1A_DATA1__SIM_M_HADDR_4 = IOMUX_PAD(0x04CC, 0x0184, 7, 0x0000, 0, 0), + MX6_PAD_QSPI1A_DATA1__SDMA_DEBUG_PC_0 = IOMUX_PAD(0x04CC, 0x0184, 9, 0x0000, 0, 0), + + MX6_PAD_QSPI1A_DATA2__QSPI1_A_DATA_2 = IOMUX_PAD(0x04D0, 0x0188, 0, 0x0000, 0, 0), + MX6_PAD_QSPI1A_DATA2__USB_OTG1_PWR = IOMUX_PAD(0x04D0, 0x0188, 1, 0x0000, 0, 0), + MX6_PAD_QSPI1A_DATA2__ECSPI5_SS1 = IOMUX_PAD(0x04D0, 0x0188, 2, 0x0000, 0, 0), + MX6_PAD_QSPI1A_DATA2__ESAI_TX_CLK = IOMUX_PAD(0x04D0, 0x0188, 3, 0x078C, 2, 0), + MX6_PAD_QSPI1A_DATA2__CSI1_DATA_12 = IOMUX_PAD(0x04D0, 0x0188, 4, 0x06CC, 1, 0), + MX6_PAD_QSPI1A_DATA2__GPIO4_IO_18 = IOMUX_PAD(0x04D0, 0x0188, 5, 0x0000, 0, 0), + MX6_PAD_QSPI1A_DATA2__WEIM_DATA_4 = IOMUX_PAD(0x04D0, 0x0188, 6, 0x0000, 0, 0), + MX6_PAD_QSPI1A_DATA2__SIM_M_HADDR_6 = IOMUX_PAD(0x04D0, 0x0188, 7, 0x0000, 0, 0), + MX6_PAD_QSPI1A_DATA2__SDMA_DEBUG_PC_1 = IOMUX_PAD(0x04D0, 0x0188, 9, 0x0000, 0, 0), + + MX6_PAD_QSPI1A_DATA3__QSPI1_A_DATA_3 = IOMUX_PAD(0x04D4, 0x018C, 0, 0x0000, 0, 0), + MX6_PAD_QSPI1A_DATA3__USB_OTG1_OC = IOMUX_PAD(0x04D4, 0x018C, 1, 0x0860, 2, 0), + MX6_PAD_QSPI1A_DATA3__ECSPI5_SS2 = IOMUX_PAD(0x04D4, 0x018C, 2, 0x0000, 0, 0), + MX6_PAD_QSPI1A_DATA3__ESAI_TX0 = IOMUX_PAD(0x04D4, 0x018C, 3, 0x0790, 2, 0), + MX6_PAD_QSPI1A_DATA3__CSI1_DATA_11 = IOMUX_PAD(0x04D4, 0x018C, 4, 0x06C8, 1, 0), + MX6_PAD_QSPI1A_DATA3__GPIO4_IO_19 = IOMUX_PAD(0x04D4, 0x018C, 5, 0x0000, 0, 0), + MX6_PAD_QSPI1A_DATA3__WEIM_DATA_3 = IOMUX_PAD(0x04D4, 0x018C, 6, 0x0000, 0, 0), + MX6_PAD_QSPI1A_DATA3__SIM_M_HADDR_7 = IOMUX_PAD(0x04D4, 0x018C, 7, 0x0000, 0, 0), + MX6_PAD_QSPI1A_DATA3__SDMA_DEBUG_PC_2 = IOMUX_PAD(0x04D4, 0x018C, 9, 0x0000, 0, 0), + + MX6_PAD_QSPI1A_DQS__QSPI1_A_DQS = IOMUX_PAD(0x04D8, 0x0190, 0, 0x0000, 0, 0), + MX6_PAD_QSPI1A_DQS__CAN2_TX = IOMUX_PAD(0x04D8, 0x0190, 1, 0x0000, 0, 0), + MX6_PAD_QSPI1A_DQS__CANFD_TX2 = IOMUX_PAD(0x04D8, 0x0190, 2, 0x0000, 0, 0), + MX6_PAD_QSPI1A_DQS__ECSPI5_MOSI = IOMUX_PAD(0x04D8, 0x0190, 3, 0x0758, 1, 0), + MX6_PAD_QSPI1A_DQS__CSI1_DATA_15 = IOMUX_PAD(0x04D8, 0x0190, 4, 0x06D8, 1, 0), + MX6_PAD_QSPI1A_DQS__GPIO4_IO_20 = IOMUX_PAD(0x04D8, 0x0190, 5, 0x0000, 0, 0), + MX6_PAD_QSPI1A_DQS__WEIM_DATA_7 = IOMUX_PAD(0x04D8, 0x0190, 6, 0x0000, 0, 0), + MX6_PAD_QSPI1A_DQS__SIM_M_HADDR_13 = IOMUX_PAD(0x04D8, 0x0190, 7, 0x0000, 0, 0), + MX6_PAD_QSPI1A_DQS__SDMA_DEBUG_BUS_DEVICE_4 = IOMUX_PAD(0x04D8, 0x0190, 9, 0x0000, 0, 0), + + MX6_PAD_QSPI1A_SCLK__QSPI1_A_SCLK = IOMUX_PAD(0x04DC, 0x0194, 0, 0x0000, 0, 0), + MX6_PAD_QSPI1A_SCLK__ANATOP_OTG2_ID = IOMUX_PAD(0x04DC, 0x0194, 1, 0x0628, 2, 0), + MX6_PAD_QSPI1A_SCLK__ECSPI1_SCLK = IOMUX_PAD(0x04DC, 0x0194, 2, 0x0710, 1, 0), + MX6_PAD_QSPI1A_SCLK__ESAI_TX2_RX3 = IOMUX_PAD(0x04DC, 0x0194, 3, 0x0798, 2, 0), + MX6_PAD_QSPI1A_SCLK__CSI1_DATA_1 = IOMUX_PAD(0x04DC, 0x0194, 4, 0x06A4, 1, 0), + MX6_PAD_QSPI1A_SCLK__GPIO4_IO_21 = IOMUX_PAD(0x04DC, 0x0194, 5, 0x0000, 0, 0), + MX6_PAD_QSPI1A_SCLK__WEIM_DATA_0 = IOMUX_PAD(0x04DC, 0x0194, 6, 0x0000, 0, 0), + MX6_PAD_QSPI1A_SCLK__SIM_M_HADDR_0 = IOMUX_PAD(0x04DC, 0x0194, 7, 0x0000, 0, 0), + MX6_PAD_QSPI1A_SCLK__SDMA_DEBUG_PC_5 = IOMUX_PAD(0x04DC, 0x0194, 9, 0x0000, 0, 0), + + MX6_PAD_QSPI1A_SS0_B__QSPI1_A_SS0_B = IOMUX_PAD(0x04E0, 0x0198, 0, 0x0000, 0, 0), + MX6_PAD_QSPI1A_SS0_B__USB_OTG2_PWR = IOMUX_PAD(0x04E0, 0x0198, 1, 0x0000, 0, 0), + MX6_PAD_QSPI1A_SS0_B__ECSPI1_SS0 = IOMUX_PAD(0x04E0, 0x0198, 2, 0x071C, 1, 0), + MX6_PAD_QSPI1A_SS0_B__ESAI_TX3_RX2 = IOMUX_PAD(0x04E0, 0x0198, 3, 0x079C, 2, 0), + MX6_PAD_QSPI1A_SS0_B__CSI1_DATA_0 = IOMUX_PAD(0x04E0, 0x0198, 4, 0x06A0, 1, 0), + MX6_PAD_QSPI1A_SS0_B__GPIO4_IO_22 = IOMUX_PAD(0x04E0, 0x0198, 5, 0x0000, 0, 0), + MX6_PAD_QSPI1A_SS0_B__WEIM_DATA_1 = IOMUX_PAD(0x04E0, 0x0198, 6, 0x0000, 0, 0), + MX6_PAD_QSPI1A_SS0_B__SIM_M_HADDR_1 = IOMUX_PAD(0x04E0, 0x0198, 7, 0x0000, 0, 0), + MX6_PAD_QSPI1A_SS0_B__SDMA_DEBUG_PC_4 = IOMUX_PAD(0x04E0, 0x0198, 9, 0x0000, 0, 0), + + MX6_PAD_QSPI1A_SS1_B__QSPI1_A_SS1_B = IOMUX_PAD(0x04E4, 0x019C, 0, 0x0000, 0, 0), + MX6_PAD_QSPI1A_SS1_B__CAN1_RX = IOMUX_PAD(0x04E4, 0x019C, 1, 0x068C, 2, 0), + MX6_PAD_QSPI1A_SS1_B__CANFD_RX1 = IOMUX_PAD(0x04E4, 0x019C, 2, 0x0694, 2, 0), + MX6_PAD_QSPI1A_SS1_B__ECSPI5_MISO = IOMUX_PAD(0x04E4, 0x019C, 3, 0x0754, 1, 0), + MX6_PAD_QSPI1A_SS1_B__CSI1_DATA_10 = IOMUX_PAD(0x04E4, 0x019C, 4, 0x06FC, 1, 0), + MX6_PAD_QSPI1A_SS1_B__GPIO4_IO_23 = IOMUX_PAD(0x04E4, 0x019C, 5, 0x0000, 0, 0), + MX6_PAD_QSPI1A_SS1_B__WEIM_DATA_2 = IOMUX_PAD(0x04E4, 0x019C, 6, 0x0000, 0, 0), + MX6_PAD_QSPI1A_SS1_B__SIM_M_HADDR_12 = IOMUX_PAD(0x04E4, 0x019C, 7, 0x0000, 0, 0), + MX6_PAD_QSPI1A_SS1_B__SDMA_DEBUG_PC_3 = IOMUX_PAD(0x04E4, 0x019C, 9, 0x0000, 0, 0), + + MX6_PAD_QSPI1B_DATA0__QSPI1_B_DATA_0 = IOMUX_PAD(0x04E8, 0x01A0, 0, 0x0000, 0, 0), + MX6_PAD_QSPI1B_DATA0__UART3_CTS_B = IOMUX_PAD(0x04E8, 0x01A0, 1, 0x083C, 4, 0), + MX6_PAD_QSPI1B_DATA0__ECSPI3_MOSI = IOMUX_PAD(0x04E8, 0x01A0, 2, 0x0738, 1, 0), + MX6_PAD_QSPI1B_DATA0__ESAI_RX_FS = IOMUX_PAD(0x04E8, 0x01A0, 3, 0x0778, 2, 0), + MX6_PAD_QSPI1B_DATA0__CSI1_DATA_22 = IOMUX_PAD(0x04E8, 0x01A0, 4, 0x06F4, 1, 0), + MX6_PAD_QSPI1B_DATA0__GPIO4_IO_24 = IOMUX_PAD(0x04E8, 0x01A0, 5, 0x0000, 0, 0), + MX6_PAD_QSPI1B_DATA0__WEIM_DATA_14 = IOMUX_PAD(0x04E8, 0x01A0, 6, 0x0000, 0, 0), + MX6_PAD_QSPI1B_DATA0__SIM_M_HADDR_9 = IOMUX_PAD(0x04E8, 0x01A0, 7, 0x0000, 0, 0), + + MX6_PAD_QSPI1B_DATA1__QSPI1_B_DATA_1 = IOMUX_PAD(0x04EC, 0x01A4, 0, 0x0000, 0, 0), + MX6_PAD_QSPI1B_DATA1__UART3_RTS_B = IOMUX_PAD(0x04EC, 0x01A4, 1, 0x083C, 5, 0), + MX6_PAD_QSPI1B_DATA1__ECSPI3_MISO = IOMUX_PAD(0x04EC, 0x01A4, 2, 0x0734, 1, 0), + MX6_PAD_QSPI1B_DATA1__ESAI_RX_CLK = IOMUX_PAD(0x04EC, 0x01A4, 3, 0x0788, 2, 0), + MX6_PAD_QSPI1B_DATA1__CSI1_DATA_21 = IOMUX_PAD(0x04EC, 0x01A4, 4, 0x06F0, 1, 0), + MX6_PAD_QSPI1B_DATA1__GPIO4_IO_25 = IOMUX_PAD(0x04EC, 0x01A4, 5, 0x0000, 0, 0), + MX6_PAD_QSPI1B_DATA1__WEIM_DATA_13 = IOMUX_PAD(0x04EC, 0x01A4, 6, 0x0000, 0, 0), + MX6_PAD_QSPI1B_DATA1__SIM_M_HADDR_8 = IOMUX_PAD(0x04EC, 0x01A4, 7, 0x0000, 0, 0), + + MX6_PAD_QSPI1B_DATA2__QSPI1_B_DATA_2 = IOMUX_PAD(0x04F0, 0x01A8, 0, 0x0000, 0, 0), + MX6_PAD_QSPI1B_DATA2__I2C2_SDA = IOMUX_PAD(0x04F0, 0x01A8, 1, 0x07B4, 2, 0), + MX6_PAD_QSPI1B_DATA2__ECSPI5_RDY = IOMUX_PAD(0x04F0, 0x01A8, 2, 0x0000, 0, 0), + MX6_PAD_QSPI1B_DATA2__ESAI_TX5_RX0 = IOMUX_PAD(0x04F0, 0x01A8, 3, 0x07A4, 2, 0), + MX6_PAD_QSPI1B_DATA2__CSI1_DATA_20 = IOMUX_PAD(0x04F0, 0x01A8, 4, 0x06EC, 1, 0), + MX6_PAD_QSPI1B_DATA2__GPIO4_IO_26 = IOMUX_PAD(0x04F0, 0x01A8, 5, 0x0000, 0, 0), + MX6_PAD_QSPI1B_DATA2__WEIM_DATA_12 = IOMUX_PAD(0x04F0, 0x01A8, 6, 0x0000, 0, 0), + MX6_PAD_QSPI1B_DATA2__SIM_M_HADDR_5 = IOMUX_PAD(0x04F0, 0x01A8, 7, 0x0000, 0, 0), + + MX6_PAD_QSPI1B_DATA3__QSPI1_B_DATA_3 = IOMUX_PAD(0x04F4, 0x01AC, 0, 0x0000, 0, 0), + MX6_PAD_QSPI1B_DATA3__I2C2_SCL = IOMUX_PAD(0x04F4, 0x01AC, 1, 0x07B0, 2, 0), + MX6_PAD_QSPI1B_DATA3__ECSPI5_SS3 = IOMUX_PAD(0x04F4, 0x01AC, 2, 0x0000, 0, 0), + MX6_PAD_QSPI1B_DATA3__ESAI_TX_FS = IOMUX_PAD(0x04F4, 0x01AC, 3, 0x077C, 2, 0), + MX6_PAD_QSPI1B_DATA3__CSI1_DATA_19 = IOMUX_PAD(0x04F4, 0x01AC, 4, 0x06E8, 1, 0), + MX6_PAD_QSPI1B_DATA3__GPIO4_IO_27 = IOMUX_PAD(0x04F4, 0x01AC, 5, 0x0000, 0, 0), + MX6_PAD_QSPI1B_DATA3__WEIM_DATA_11 = IOMUX_PAD(0x04F4, 0x01AC, 6, 0x0000, 0, 0), + MX6_PAD_QSPI1B_DATA3__SIM_M_HADDR_2 = IOMUX_PAD(0x04F4, 0x01AC, 7, 0x0000, 0, 0), + + MX6_PAD_QSPI1B_DQS__QSPI1_B_DQS = IOMUX_PAD(0x04F8, 0x01B0, 0, 0x0000, 0, 0), + MX6_PAD_QSPI1B_DQS__CAN1_TX = IOMUX_PAD(0x04F8, 0x01B0, 1, 0x0000, 0, 0), + MX6_PAD_QSPI1B_DQS__CANFD_TX1 = IOMUX_PAD(0x04F8, 0x01B0, 2, 0x0000, 0, 0), + MX6_PAD_QSPI1B_DQS__ECSPI5_SS0 = IOMUX_PAD(0x04F8, 0x01B0, 3, 0x075C, 1, 0), + MX6_PAD_QSPI1B_DQS__CSI1_DATA_23 = IOMUX_PAD(0x04F8, 0x01B0, 4, 0x06F8, 1, 0), + MX6_PAD_QSPI1B_DQS__GPIO4_IO_28 = IOMUX_PAD(0x04F8, 0x01B0, 5, 0x0000, 0, 0), + MX6_PAD_QSPI1B_DQS__WEIM_DATA_15 = IOMUX_PAD(0x04F8, 0x01B0, 6, 0x0000, 0, 0), + MX6_PAD_QSPI1B_DQS__SIM_M_HADDR_15 = IOMUX_PAD(0x04F8, 0x01B0, 7, 0x0000, 0, 0), + + MX6_PAD_QSPI1B_SCLK__QSPI1_B_SCLK = IOMUX_PAD(0x04FC, 0x01B4, 0, 0x0000, 0, 0), + MX6_PAD_QSPI1B_SCLK__UART3_RX = IOMUX_PAD(0x04FC, 0x01B4, 1, 0x0840, 4, 0), + MX6_PAD_QSPI1B_SCLK__ECSPI3_SCLK = IOMUX_PAD(0x04FC, 0x01B4, 2, 0x0730, 1, 0), + MX6_PAD_QSPI1B_SCLK__ESAI_RX_HF_CLK = IOMUX_PAD(0x04FC, 0x01B4, 3, 0x0780, 2, 0), + MX6_PAD_QSPI1B_SCLK__CSI1_DATA_16 = IOMUX_PAD(0x04FC, 0x01B4, 4, 0x06DC, 1, 0), + MX6_PAD_QSPI1B_SCLK__GPIO4_IO_29 = IOMUX_PAD(0x04FC, 0x01B4, 5, 0x0000, 0, 0), + MX6_PAD_QSPI1B_SCLK__WEIM_DATA_8 = IOMUX_PAD(0x04FC, 0x01B4, 6, 0x0000, 0, 0), + MX6_PAD_QSPI1B_SCLK__SIM_M_HADDR_11 = IOMUX_PAD(0x04FC, 0x01B4, 7, 0x0000, 0, 0), + + MX6_PAD_QSPI1B_SS0_B__QSPI1_B_SS0_B = IOMUX_PAD(0x0500, 0x01B8, 0, 0x0000, 0, 0), + MX6_PAD_QSPI1B_SS0_B__UART3_TX = IOMUX_PAD(0x0500, 0x01B8, 1, 0x0840, 5, 0), + MX6_PAD_QSPI1B_SS0_B__ECSPI3_SS0 = IOMUX_PAD(0x0500, 0x01B8, 2, 0x073C, 1, 0), + MX6_PAD_QSPI1B_SS0_B__ESAI_TX_HF_CLK = IOMUX_PAD(0x0500, 0x01B8, 3, 0x0784, 3, 0), + MX6_PAD_QSPI1B_SS0_B__CSI1_DATA_17 = IOMUX_PAD(0x0500, 0x01B8, 4, 0x06E0, 1, 0), + MX6_PAD_QSPI1B_SS0_B__GPIO4_IO_30 = IOMUX_PAD(0x0500, 0x01B8, 5, 0x0000, 0, 0), + MX6_PAD_QSPI1B_SS0_B__WEIM_DATA_9 = IOMUX_PAD(0x0500, 0x01B8, 6, 0x0000, 0, 0), + MX6_PAD_QSPI1B_SS0_B__SIM_M_HADDR_10 = IOMUX_PAD(0x0500, 0x01B8, 7, 0x0000, 0, 0), + + MX6_PAD_QSPI1B_SS1_B__QSPI1_B_SS1_B = IOMUX_PAD(0x0504, 0x01BC, 0, 0x0000, 0, 0), + MX6_PAD_QSPI1B_SS1_B__CAN2_RX = IOMUX_PAD(0x0504, 0x01BC, 1, 0x0690, 2, 0), + MX6_PAD_QSPI1B_SS1_B__CANFD_RX2 = IOMUX_PAD(0x0504, 0x01BC, 2, 0x0698, 2, 0), + MX6_PAD_QSPI1B_SS1_B__ECSPI5_SCLK = IOMUX_PAD(0x0504, 0x01BC, 3, 0x0750, 1, 0), + MX6_PAD_QSPI1B_SS1_B__CSI1_DATA_18 = IOMUX_PAD(0x0504, 0x01BC, 4, 0x06E4, 1, 0), + MX6_PAD_QSPI1B_SS1_B__GPIO4_IO_31 = IOMUX_PAD(0x0504, 0x01BC, 5, 0x0000, 0, 0), + MX6_PAD_QSPI1B_SS1_B__WEIM_DATA_10 = IOMUX_PAD(0x0504, 0x01BC, 6, 0x0000, 0, 0), + MX6_PAD_QSPI1B_SS1_B__SIM_M_HADDR_14 = IOMUX_PAD(0x0504, 0x01BC, 7, 0x0000, 0, 0), + + MX6_PAD_RGMII1_RD0__ENET1_RX_DATA_0 = IOMUX_PAD(0x0508, 0x01C0, 0, 0x0000, 0, 0), + MX6_PAD_RGMII1_RD0__GPIO5_IO_0 = IOMUX_PAD(0x0508, 0x01C0, 5, 0x0000, 0, 0), + MX6_PAD_RGMII1_RD0__CSI2_DATA_10 = IOMUX_PAD(0x0508, 0x01C0, 6, 0x0000, 0, 0), + MX6_PAD_RGMII1_RD0__ANATOP_TESTI_0 = IOMUX_PAD(0x0508, 0x01C0, 7, 0x0000, 0, 0), + MX6_PAD_RGMII1_RD0__RAWNAND_TESTER_TRIGGER = IOMUX_PAD(0x0508, 0x01C0, 8, 0x0000, 0, 0), + MX6_PAD_RGMII1_RD0__PCIE_CTRL_DEBUG_0 = IOMUX_PAD(0x0508, 0x01C0, 9, 0x0000, 0, 0), + + MX6_PAD_RGMII1_RD1__ENET1_RX_DATA_1 = IOMUX_PAD(0x050C, 0x01C4, 0, 0x0000, 0, 0), + MX6_PAD_RGMII1_RD1__GPIO5_IO_1 = IOMUX_PAD(0x050C, 0x01C4, 5, 0x0000, 0, 0), + MX6_PAD_RGMII1_RD1__CSI2_DATA_11 = IOMUX_PAD(0x050C, 0x01C4, 6, 0x0000, 0, 0), + MX6_PAD_RGMII1_RD1__ANATOP_TESTI_1 = IOMUX_PAD(0x050C, 0x01C4, 7, 0x0000, 0, 0), + MX6_PAD_RGMII1_RD1__USDHC1_TESTER_TRIGGER = IOMUX_PAD(0x050C, 0x01C4, 8, 0x0000, 0, 0), + MX6_PAD_RGMII1_RD1__PCIE_CTRL_DEBUG_1 = IOMUX_PAD(0x050C, 0x01C4, 9, 0x0000, 0, 0), + + MX6_PAD_RGMII1_RD2__ENET1_RX_DATA_2 = IOMUX_PAD(0x0510, 0x01C8, 0, 0x0000, 0, 0), + MX6_PAD_RGMII1_RD2__GPIO5_IO_2 = IOMUX_PAD(0x0510, 0x01C8, 5, 0x0000, 0, 0), + MX6_PAD_RGMII1_RD2__CSI2_DATA_12 = IOMUX_PAD(0x0510, 0x01C8, 6, 0x0000, 0, 0), + MX6_PAD_RGMII1_RD2__ANATOP_TESTI_2 = IOMUX_PAD(0x0510, 0x01C8, 7, 0x0000, 0, 0), + MX6_PAD_RGMII1_RD2__USDHC2_TESTER_TRIGGER = IOMUX_PAD(0x0510, 0x01C8, 8, 0x0000, 0, 0), + MX6_PAD_RGMII1_RD2__PCIE_CTRL_DEBUG_2 = IOMUX_PAD(0x0510, 0x01C8, 9, 0x0000, 0, 0), + + MX6_PAD_RGMII1_RD3__ENET1_RX_DATA_3 = IOMUX_PAD(0x0514, 0x01CC, 0, 0x0000, 0, 0), + MX6_PAD_RGMII1_RD3__GPIO5_IO_3 = IOMUX_PAD(0x0514, 0x01CC, 5, 0x0000, 0, 0), + MX6_PAD_RGMII1_RD3__CSI2_DATA_13 = IOMUX_PAD(0x0514, 0x01CC, 6, 0x0000, 0, 0), + MX6_PAD_RGMII1_RD3__ANATOP_TESTI_3 = IOMUX_PAD(0x0514, 0x01CC, 7, 0x0000, 0, 0), + MX6_PAD_RGMII1_RD3__USDHC3_TESTER_TRIGGER = IOMUX_PAD(0x0514, 0x01CC, 8, 0x0000, 0, 0), + MX6_PAD_RGMII1_RD3__PCIE_CTRL_DEBUG_3 = IOMUX_PAD(0x0514, 0x01CC, 9, 0x0000, 0, 0), + + MX6_PAD_RGMII1_RX_CTL__ENET1_RX_EN = IOMUX_PAD(0x0518, 0x01D0, 0, 0x0000, 0, 0), + MX6_PAD_RGMII1_RX_CTL__GPIO5_IO_4 = IOMUX_PAD(0x0518, 0x01D0, 5, 0x0000, 0, 0), + MX6_PAD_RGMII1_RX_CTL__CSI2_DATA_14 = IOMUX_PAD(0x0518, 0x01D0, 6, 0x0000, 0, 0), + MX6_PAD_RGMII1_RX_CTL__ANATOP_TESTO_0 = IOMUX_PAD(0x0518, 0x01D0, 7, 0x0000, 0, 0), + MX6_PAD_RGMII1_RX_CTL__USDHC4_TESTER_TRIGGER = IOMUX_PAD(0x0518, 0x01D0, 8, 0x0000, 0, 0), + MX6_PAD_RGMII1_RX_CTL__PCIE_CTRL_DEBUG_4 = IOMUX_PAD(0x0518, 0x01D0, 9, 0x0000, 0, 0), + + MX6_PAD_RGMII1_RXC__ENET1_RX_CLK = IOMUX_PAD(0x051C, 0x01D4, 0, 0x0768, 1, 0), + MX6_PAD_RGMII1_RXC__ENET1_RX_ER = IOMUX_PAD(0x051C, 0x01D4, 1, 0x0000, 0, 0), + MX6_PAD_RGMII1_RXC__GPIO5_IO_5 = IOMUX_PAD(0x051C, 0x01D4, 5, 0x0000, 0, 0), + MX6_PAD_RGMII1_RXC__CSI2_DATA_15 = IOMUX_PAD(0x051C, 0x01D4, 6, 0x0000, 0, 0), + MX6_PAD_RGMII1_RXC__ANATOP_TESTO_1 = IOMUX_PAD(0x051C, 0x01D4, 7, 0x0000, 0, 0), + MX6_PAD_RGMII1_RXC__ECSPI1_TESTER_TRIGGER = IOMUX_PAD(0x051C, 0x01D4, 8, 0x0000, 0, 0), + MX6_PAD_RGMII1_RXC__PCIE_CTRL_DEBUG_5 = IOMUX_PAD(0x051C, 0x01D4, 9, 0x0000, 0, 0), + + MX6_PAD_RGMII1_TD0__ENET1_TX_DATA_0 = IOMUX_PAD(0x0520, 0x01D8, 0, 0x0000, 0, 0), + MX6_PAD_RGMII1_TD0__SAI2_RX_SYNC = IOMUX_PAD(0x0520, 0x01D8, 2, 0x0810, 1, 0), + MX6_PAD_RGMII1_TD0__GPIO5_IO_6 = IOMUX_PAD(0x0520, 0x01D8, 5, 0x0000, 0, 0), + MX6_PAD_RGMII1_TD0__CSI2_DATA_16 = IOMUX_PAD(0x0520, 0x01D8, 6, 0x0000, 0, 0), + MX6_PAD_RGMII1_TD0__ANATOP_TESTO_2 = IOMUX_PAD(0x0520, 0x01D8, 7, 0x0000, 0, 0), + MX6_PAD_RGMII1_TD0__ECSPI2_TESTER_TRIGGER = IOMUX_PAD(0x0520, 0x01D8, 8, 0x0000, 0, 0), + MX6_PAD_RGMII1_TD0__PCIE_CTRL_DEBUG_6 = IOMUX_PAD(0x0520, 0x01D8, 9, 0x0000, 0, 0), + + MX6_PAD_RGMII1_TD1__ENET1_TX_DATA_1 = IOMUX_PAD(0x0524, 0x01DC, 0, 0x0000, 0, 0), + MX6_PAD_RGMII1_TD1__SAI2_RX_BCLK = IOMUX_PAD(0x0524, 0x01DC, 2, 0x0808, 1, 0), + MX6_PAD_RGMII1_TD1__GPIO5_IO_7 = IOMUX_PAD(0x0524, 0x01DC, 5, 0x0000, 0, 0), + MX6_PAD_RGMII1_TD1__CSI2_DATA_17 = IOMUX_PAD(0x0524, 0x01DC, 6, 0x0000, 0, 0), + MX6_PAD_RGMII1_TD1__ANATOP_TESTO_3 = IOMUX_PAD(0x0524, 0x01DC, 7, 0x0000, 0, 0), + MX6_PAD_RGMII1_TD1__ECSPI3_TESTER_TRIGGER = IOMUX_PAD(0x0524, 0x01DC, 8, 0x0000, 0, 0), + MX6_PAD_RGMII1_TD1__PCIE_CTRL_DEBUG_7 = IOMUX_PAD(0x0524, 0x01DC, 9, 0x0000, 0, 0), + + MX6_PAD_RGMII1_TD2__ENET1_TX_DATA_2 = IOMUX_PAD(0x0528, 0x01E0, 0, 0x0000, 0, 0), + MX6_PAD_RGMII1_TD2__SAI2_TX_SYNC = IOMUX_PAD(0x0528, 0x01E0, 2, 0x0818, 1, 0), + MX6_PAD_RGMII1_TD2__GPIO5_IO_8 = IOMUX_PAD(0x0528, 0x01E0, 5, 0x0000, 0, 0), + MX6_PAD_RGMII1_TD2__CSI2_DATA_18 = IOMUX_PAD(0x0528, 0x01E0, 6, 0x0000, 0, 0), + MX6_PAD_RGMII1_TD2__ANATOP_TESTO_4 = IOMUX_PAD(0x0528, 0x01E0, 7, 0x0000, 0, 0), + MX6_PAD_RGMII1_TD2__ECSPI4_TESTER_TRIGGER = IOMUX_PAD(0x0528, 0x01E0, 8, 0x0000, 0, 0), + MX6_PAD_RGMII1_TD2__PCIE_CTRL_DEBUG_8 = IOMUX_PAD(0x0528, 0x01E0, 9, 0x0000, 0, 0), + + MX6_PAD_RGMII1_TD3__ENET1_TX_DATA_3 = IOMUX_PAD(0x052C, 0x01E4, 0, 0x0000, 0, 0), + MX6_PAD_RGMII1_TD3__SAI2_TX_BCLK = IOMUX_PAD(0x052C, 0x01E4, 2, 0x0814, 1, 0), + MX6_PAD_RGMII1_TD3__GPIO5_IO_9 = IOMUX_PAD(0x052C, 0x01E4, 5, 0x0000, 0, 0), + MX6_PAD_RGMII1_TD3__CSI2_DATA_19 = IOMUX_PAD(0x052C, 0x01E4, 6, 0x0000, 0, 0), + MX6_PAD_RGMII1_TD3__ANATOP_TESTO_5 = IOMUX_PAD(0x052C, 0x01E4, 7, 0x0000, 0, 0), + MX6_PAD_RGMII1_TD3__ECSPI5_TESTER_TRIGGER = IOMUX_PAD(0x052C, 0x01E4, 8, 0x0000, 0, 0), + MX6_PAD_RGMII1_TD3__PCIE_CTRL_DEBUG_9 = IOMUX_PAD(0x052C, 0x01E4, 9, 0x0000, 0, 0), + + MX6_PAD_RGMII1_TX_CTL__ENET1_TX_EN = IOMUX_PAD(0x0530, 0x01E8, 0, 0x0000, 0, 0), + MX6_PAD_RGMII1_TX_CTL__SAI2_RX_DATA_0 = IOMUX_PAD(0x0530, 0x01E8, 2, 0x080C, 1, 0), + MX6_PAD_RGMII1_TX_CTL__GPIO5_IO_10 = IOMUX_PAD(0x0530, 0x01E8, 5, 0x0000, 0, 0), + MX6_PAD_RGMII1_TX_CTL__CSI2_DATA_0 = IOMUX_PAD(0x0530, 0x01E8, 6, 0x0000, 0, 0), + MX6_PAD_RGMII1_TX_CTL__ANATOP_TESTO_6 = IOMUX_PAD(0x0530, 0x01E8, 7, 0x0000, 0, 0), + MX6_PAD_RGMII1_TX_CTL__QSPI1_TESTER_TRIGGER = IOMUX_PAD(0x0530, 0x01E8, 8, 0x0000, 0, 0), + MX6_PAD_RGMII1_TX_CTL__PCIE_CTRL_DEBUG_10 = IOMUX_PAD(0x0530, 0x01E8, 9, 0x0000, 0, 0), + + MX6_PAD_RGMII1_TXC__ENET1_RGMII_TXC = IOMUX_PAD(0x0534, 0x01EC, 0, 0x0000, 0, 0), + MX6_PAD_RGMII1_TXC__ENET1_TX_ER = IOMUX_PAD(0x0534, 0x01EC, 1, 0x0000, 0, 0), + MX6_PAD_RGMII1_TXC__SAI2_TX_DATA_0 = IOMUX_PAD(0x0534, 0x01EC, 2, 0x0000, 0, 0), + MX6_PAD_RGMII1_TXC__GPIO5_IO_11 = IOMUX_PAD(0x0534, 0x01EC, 5, 0x0000, 0, 0), + MX6_PAD_RGMII1_TXC__CSI2_DATA_1 = IOMUX_PAD(0x0534, 0x01EC, 6, 0x0000, 0, 0), + MX6_PAD_RGMII1_TXC__ANATOP_TESTO_7 = IOMUX_PAD(0x0534, 0x01EC, 7, 0x0000, 0, 0), + MX6_PAD_RGMII1_TXC__QSPI2_TESTER_TRIGGER = IOMUX_PAD(0x0534, 0x01EC, 8, 0x0000, 0, 0), + MX6_PAD_RGMII1_TXC__PCIE_CTRL_DEBUG_11 = IOMUX_PAD(0x0534, 0x01EC, 9, 0x0000, 0, 0), + + MX6_PAD_RGMII2_RD0__ENET2_RX_DATA_0 = IOMUX_PAD(0x0538, 0x01F0, 0, 0x0000, 0, 0), + MX6_PAD_RGMII2_RD0__PWM4_OUT = IOMUX_PAD(0x0538, 0x01F0, 2, 0x0000, 0, 0), + MX6_PAD_RGMII2_RD0__GPIO5_IO_12 = IOMUX_PAD(0x0538, 0x01F0, 5, 0x0000, 0, 0), + MX6_PAD_RGMII2_RD0__CSI2_DATA_2 = IOMUX_PAD(0x0538, 0x01F0, 6, 0x0000, 0, 0), + MX6_PAD_RGMII2_RD0__ANATOP_TESTO_8 = IOMUX_PAD(0x0538, 0x01F0, 7, 0x0000, 0, 0), + MX6_PAD_RGMII2_RD0__VDEC_DEBUG_18 = IOMUX_PAD(0x0538, 0x01F0, 8, 0x0000, 0, 0), + MX6_PAD_RGMII2_RD0__PCIE_CTRL_DEBUG_12 = IOMUX_PAD(0x0538, 0x01F0, 9, 0x0000, 0, 0), + + MX6_PAD_RGMII2_RD1__ENET2_RX_DATA_1 = IOMUX_PAD(0x053C, 0x01F4, 0, 0x0000, 0, 0), + MX6_PAD_RGMII2_RD1__PWM3_OUT = IOMUX_PAD(0x053C, 0x01F4, 2, 0x0000, 0, 0), + MX6_PAD_RGMII2_RD1__GPIO5_IO_13 = IOMUX_PAD(0x053C, 0x01F4, 5, 0x0000, 0, 0), + MX6_PAD_RGMII2_RD1__CSI2_DATA_3 = IOMUX_PAD(0x053C, 0x01F4, 6, 0x0000, 0, 0), + MX6_PAD_RGMII2_RD1__ANATOP_TESTO_9 = IOMUX_PAD(0x053C, 0x01F4, 7, 0x0000, 0, 0), + MX6_PAD_RGMII2_RD1__VDEC_DEBUG_19 = IOMUX_PAD(0x053C, 0x01F4, 8, 0x0000, 0, 0), + MX6_PAD_RGMII2_RD1__PCIE_CTRL_DEBUG_13 = IOMUX_PAD(0x053C, 0x01F4, 9, 0x0000, 0, 0), + + MX6_PAD_RGMII2_RD2__ENET2_RX_DATA_2 = IOMUX_PAD(0x0540, 0x01F8, 0, 0x0000, 0, 0), + MX6_PAD_RGMII2_RD2__PWM2_OUT = IOMUX_PAD(0x0540, 0x01F8, 2, 0x0000, 0, 0), + MX6_PAD_RGMII2_RD2__GPIO5_IO_14 = IOMUX_PAD(0x0540, 0x01F8, 5, 0x0000, 0, 0), + MX6_PAD_RGMII2_RD2__CSI2_DATA_4 = IOMUX_PAD(0x0540, 0x01F8, 6, 0x0000, 0, 0), + MX6_PAD_RGMII2_RD2__ANATOP_TESTO_10 = IOMUX_PAD(0x0540, 0x01F8, 7, 0x0000, 0, 0), + MX6_PAD_RGMII2_RD2__VDEC_DEBUG_20 = IOMUX_PAD(0x0540, 0x01F8, 8, 0x0000, 0, 0), + MX6_PAD_RGMII2_RD2__PCIE_CTRL_DEBUG_14 = IOMUX_PAD(0x0540, 0x01F8, 9, 0x0000, 0, 0), + + MX6_PAD_RGMII2_RD3__ENET2_RX_DATA_3 = IOMUX_PAD(0x0544, 0x01FC, 0, 0x0000, 0, 0), + MX6_PAD_RGMII2_RD3__PWM1_OUT = IOMUX_PAD(0x0544, 0x01FC, 2, 0x0000, 0, 0), + MX6_PAD_RGMII2_RD3__GPIO5_IO_15 = IOMUX_PAD(0x0544, 0x01FC, 5, 0x0000, 0, 0), + MX6_PAD_RGMII2_RD3__CSI2_DATA_5 = IOMUX_PAD(0x0544, 0x01FC, 6, 0x0000, 0, 0), + MX6_PAD_RGMII2_RD3__ANATOP_TESTO_11 = IOMUX_PAD(0x0544, 0x01FC, 7, 0x0000, 0, 0), + MX6_PAD_RGMII2_RD3__VDEC_DEBUG_21 = IOMUX_PAD(0x0544, 0x01FC, 8, 0x0000, 0, 0), + MX6_PAD_RGMII2_RD3__PCIE_CTRL_DEBUG_15 = IOMUX_PAD(0x0544, 0x01FC, 9, 0x0000, 0, 0), + + MX6_PAD_RGMII2_RX_CTL__ENET2_RX_EN = IOMUX_PAD(0x0548, 0x0200, 0, 0x0000, 0, 0), + MX6_PAD_RGMII2_RX_CTL__GPIO5_IO_16 = IOMUX_PAD(0x0548, 0x0200, 5, 0x0000, 0, 0), + MX6_PAD_RGMII2_RX_CTL__CSI2_DATA_6 = IOMUX_PAD(0x0548, 0x0200, 6, 0x0000, 0, 0), + MX6_PAD_RGMII2_RX_CTL__ANATOP_TESTO_12 = IOMUX_PAD(0x0548, 0x0200, 7, 0x0000, 0, 0), + MX6_PAD_RGMII2_RX_CTL__VDEC_DEBUG_22 = IOMUX_PAD(0x0548, 0x0200, 8, 0x0000, 0, 0), + MX6_PAD_RGMII2_RX_CTL__PCIE_CTRL_DEBUG_16 = IOMUX_PAD(0x0548, 0x0200, 9, 0x0000, 0, 0), + + MX6_PAD_RGMII2_RXC__ENET2_RX_CLK = IOMUX_PAD(0x054C, 0x0204, 0, 0x0774, 1, 0), + MX6_PAD_RGMII2_RXC__ENET2_RX_ER = IOMUX_PAD(0x054C, 0x0204, 1, 0x0000, 0, 0), + MX6_PAD_RGMII2_RXC__GPIO5_IO_17 = IOMUX_PAD(0x054C, 0x0204, 5, 0x0000, 0, 0), + MX6_PAD_RGMII2_RXC__CSI2_DATA_7 = IOMUX_PAD(0x054C, 0x0204, 6, 0x0000, 0, 0), + MX6_PAD_RGMII2_RXC__ANATOP_TESTO_13 = IOMUX_PAD(0x054C, 0x0204, 7, 0x0000, 0, 0), + MX6_PAD_RGMII2_RXC__VDEC_DEBUG_23 = IOMUX_PAD(0x054C, 0x0204, 8, 0x0000, 0, 0), + MX6_PAD_RGMII2_RXC__PCIE_CTRL_DEBUG_17 = IOMUX_PAD(0x054C, 0x0204, 9, 0x0000, 0, 0), + + MX6_PAD_RGMII2_TD0__ENET2_TX_DATA_0 = IOMUX_PAD(0x0550, 0x0208, 0, 0x0000, 0, 0), + MX6_PAD_RGMII2_TD0__SAI1_RX_SYNC = IOMUX_PAD(0x0550, 0x0208, 2, 0x07FC, 1, 0), + MX6_PAD_RGMII2_TD0__PWM8_OUT = IOMUX_PAD(0x0550, 0x0208, 3, 0x0000, 0, 0), + MX6_PAD_RGMII2_TD0__GPIO5_IO_18 = IOMUX_PAD(0x0550, 0x0208, 5, 0x0000, 0, 0), + MX6_PAD_RGMII2_TD0__CSI2_DATA_8 = IOMUX_PAD(0x0550, 0x0208, 6, 0x0000, 0, 0), + MX6_PAD_RGMII2_TD0__ANATOP_TESTO_14 = IOMUX_PAD(0x0550, 0x0208, 7, 0x0000, 0, 0), + MX6_PAD_RGMII2_TD0__VDEC_DEBUG_24 = IOMUX_PAD(0x0550, 0x0208, 8, 0x0000, 0, 0), + MX6_PAD_RGMII2_TD0__PCIE_CTRL_DEBUG_18 = IOMUX_PAD(0x0550, 0x0208, 9, 0x0000, 0, 0), + + MX6_PAD_RGMII2_TD1__ENET2_TX_DATA_1 = IOMUX_PAD(0x0554, 0x020C, 0, 0x0000, 0, 0), + MX6_PAD_RGMII2_TD1__SAI1_RX_BCLK = IOMUX_PAD(0x0554, 0x020C, 2, 0x07F4, 1, 0), + MX6_PAD_RGMII2_TD1__PWM7_OUT = IOMUX_PAD(0x0554, 0x020C, 3, 0x0000, 0, 0), + MX6_PAD_RGMII2_TD1__GPIO5_IO_19 = IOMUX_PAD(0x0554, 0x020C, 5, 0x0000, 0, 0), + MX6_PAD_RGMII2_TD1__CSI2_DATA_9 = IOMUX_PAD(0x0554, 0x020C, 6, 0x0000, 0, 0), + MX6_PAD_RGMII2_TD1__ANATOP_TESTO_15 = IOMUX_PAD(0x0554, 0x020C, 7, 0x0000, 0, 0), + MX6_PAD_RGMII2_TD1__VDEC_DEBUG_25 = IOMUX_PAD(0x0554, 0x020C, 8, 0x0000, 0, 0), + MX6_PAD_RGMII2_TD1__PCIE_CTRL_DEBUG_19 = IOMUX_PAD(0x0554, 0x020C, 9, 0x0000, 0, 0), + + MX6_PAD_RGMII2_TD2__ENET2_TX_DATA_2 = IOMUX_PAD(0x0558, 0x0210, 0, 0x0000, 0, 0), + MX6_PAD_RGMII2_TD2__SAI1_TX_SYNC = IOMUX_PAD(0x0558, 0x0210, 2, 0x0804, 1, 0), + MX6_PAD_RGMII2_TD2__PWM6_OUT = IOMUX_PAD(0x0558, 0x0210, 3, 0x0000, 0, 0), + MX6_PAD_RGMII2_TD2__GPIO5_IO_20 = IOMUX_PAD(0x0558, 0x0210, 5, 0x0000, 0, 0), + MX6_PAD_RGMII2_TD2__CSI2_VSYNC = IOMUX_PAD(0x0558, 0x0210, 6, 0x0000, 0, 0), + MX6_PAD_RGMII2_TD2__SJC_FAIL = IOMUX_PAD(0x0558, 0x0210, 7, 0x0000, 0, 0), + MX6_PAD_RGMII2_TD2__VDEC_DEBUG_26 = IOMUX_PAD(0x0558, 0x0210, 8, 0x0000, 0, 0), + MX6_PAD_RGMII2_TD2__PCIE_CTRL_DEBUG_20 = IOMUX_PAD(0x0558, 0x0210, 9, 0x0000, 0, 0), + + MX6_PAD_RGMII2_TD3__ENET2_TX_DATA_3 = IOMUX_PAD(0x055C, 0x0214, 0, 0x0000, 0, 0), + MX6_PAD_RGMII2_TD3__SAI1_TX_BCLK = IOMUX_PAD(0x055C, 0x0214, 2, 0x0800, 1, 0), + MX6_PAD_RGMII2_TD3__PWM5_OUT = IOMUX_PAD(0x055C, 0x0214, 3, 0x0000, 0, 0), + MX6_PAD_RGMII2_TD3__GPIO5_IO_21 = IOMUX_PAD(0x055C, 0x0214, 5, 0x0000, 0, 0), + MX6_PAD_RGMII2_TD3__CSI2_HSYNC = IOMUX_PAD(0x055C, 0x0214, 6, 0x0000, 0, 0), + MX6_PAD_RGMII2_TD3__SJC_JTAG_ACT = IOMUX_PAD(0x055C, 0x0214, 7, 0x0000, 0, 0), + MX6_PAD_RGMII2_TD3__VDEC_DEBUG_27 = IOMUX_PAD(0x055C, 0x0214, 8, 0x0000, 0, 0), + MX6_PAD_RGMII2_TD3__PCIE_CTRL_DEBUG_21 = IOMUX_PAD(0x055C, 0x0214, 9, 0x0000, 0, 0), + + MX6_PAD_RGMII2_TX_CTL__ENET2_TX_EN = IOMUX_PAD(0x0560, 0x0218, 0, 0x0000, 0, 0), + MX6_PAD_RGMII2_TX_CTL__SAI1_RX_DATA_0 = IOMUX_PAD(0x0560, 0x0218, 2, 0x07F8, 1, 0), + MX6_PAD_RGMII2_TX_CTL__GPIO5_IO_22 = IOMUX_PAD(0x0560, 0x0218, 5, 0x0000, 0, 0), + MX6_PAD_RGMII2_TX_CTL__CSI2_FIELD = IOMUX_PAD(0x0560, 0x0218, 6, 0x0000, 0, 0), + MX6_PAD_RGMII2_TX_CTL__SJC_DE_B = IOMUX_PAD(0x0560, 0x0218, 7, 0x0000, 0, 0), + MX6_PAD_RGMII2_TX_CTL__VDEC_DEBUG_28 = IOMUX_PAD(0x0560, 0x0218, 8, 0x0000, 0, 0), + MX6_PAD_RGMII2_TX_CTL__PCIE_CTRL_DEBUG_22 = IOMUX_PAD(0x0560, 0x0218, 9, 0x0000, 0, 0), + + MX6_PAD_RGMII2_TXC__ENET2_RGMII_TXC = IOMUX_PAD(0x0564, 0x021C, 0, 0x0000, 0, 0), + MX6_PAD_RGMII2_TXC__ENET2_TX_ER = IOMUX_PAD(0x0564, 0x021C, 1, 0x0000, 0, 0), + MX6_PAD_RGMII2_TXC__SAI1_TX_DATA_0 = IOMUX_PAD(0x0564, 0x021C, 2, 0x0000, 0, 0), + MX6_PAD_RGMII2_TXC__GPIO5_IO_23 = IOMUX_PAD(0x0564, 0x021C, 5, 0x0000, 0, 0), + MX6_PAD_RGMII2_TXC__CSI2_PIXCLK = IOMUX_PAD(0x0564, 0x021C, 6, 0x0000, 0, 0), + MX6_PAD_RGMII2_TXC__SJC_DONE = IOMUX_PAD(0x0564, 0x021C, 7, 0x0000, 0, 0), + MX6_PAD_RGMII2_TXC__VDEC_DEBUG_29 = IOMUX_PAD(0x0564, 0x021C, 8, 0x0000, 0, 0), + MX6_PAD_RGMII2_TXC__PCIE_CTRL_DEBUG_23 = IOMUX_PAD(0x0564, 0x021C, 9, 0x0000, 0, 0), + + MX6_PAD_SD1_CLK__USDHC1_CLK = IOMUX_PAD(0x0568, 0x0220, 0, 0x0000, 0, 0), + MX6_PAD_SD1_CLK__AUDMUX_AUD5_RXFS = IOMUX_PAD(0x0568, 0x0220, 1, 0x0668, 1, 0), + MX6_PAD_SD1_CLK__WDOG2_WDOG_B = IOMUX_PAD(0x0568, 0x0220, 2, 0x0000, 0, 0), + MX6_PAD_SD1_CLK__GPT_CLK = IOMUX_PAD(0x0568, 0x0220, 3, 0x0000, 0, 0), + MX6_PAD_SD1_CLK__WDOG2_WDOG_RST_B_DEB = IOMUX_PAD(0x0568, 0x0220, 4, 0x0000, 0, 0), + MX6_PAD_SD1_CLK__GPIO6_IO_0 = IOMUX_PAD(0x0568, 0x0220, 5, 0x0000, 0, 0), + MX6_PAD_SD1_CLK__ENET2_1588_EVENT1_OUT = IOMUX_PAD(0x0568, 0x0220, 6, 0x0000, 0, 0), + MX6_PAD_SD1_CLK__CCM_OUT1 = IOMUX_PAD(0x0568, 0x0220, 7, 0x0000, 0, 0), + MX6_PAD_SD1_CLK__VADC_ADC_PROC_CLK = IOMUX_PAD(0x0568, 0x0220, 8, 0x0000, 0, 0), + MX6_PAD_SD1_CLK__MMDC_DEBUG_45 = IOMUX_PAD(0x0568, 0x0220, 9, 0x0000, 0, 0), + + MX6_PAD_SD1_CMD__USDHC1_CMD = IOMUX_PAD(0x056C, 0x0224, 0, 0x0000, 0, 0), + MX6_PAD_SD1_CMD__AUDMUX_AUD5_RXC = IOMUX_PAD(0x056C, 0x0224, 1, 0x0664, 1, 0), + MX6_PAD_SD1_CMD__WDOG1_WDOG_B = IOMUX_PAD(0x056C, 0x0224, 2, 0x0000, 0, 0), + MX6_PAD_SD1_CMD__GPT_COMPARE1 = IOMUX_PAD(0x056C, 0x0224, 3, 0x0000, 0, 0), + MX6_PAD_SD1_CMD__WDOG1_WDOG_RST_B_DEB = IOMUX_PAD(0x056C, 0x0224, 4, 0x0000, 0, 0), + MX6_PAD_SD1_CMD__GPIO6_IO_1 = IOMUX_PAD(0x056C, 0x0224, 5, 0x0000, 0, 0), + MX6_PAD_SD1_CMD__ENET2_1588_EVENT1_IN = IOMUX_PAD(0x056C, 0x0224, 6, 0x0000, 0, 0), + MX6_PAD_SD1_CMD__CCM_CLKO1 = IOMUX_PAD(0x056C, 0x0224, 7, 0x0000, 0, 0), + MX6_PAD_SD1_CMD__VADC_EXT_SYSCLK = IOMUX_PAD(0x056C, 0x0224, 8, 0x0000, 0, 0), + MX6_PAD_SD1_CMD__MMDC_DEBUG_46 = IOMUX_PAD(0x056C, 0x0224, 9, 0x0000, 0, 0), + + MX6_PAD_SD1_DATA0__USDHC1_DATA0 = IOMUX_PAD(0x0570, 0x0228, 0, 0x0000, 0, 0), + MX6_PAD_SD1_DATA0__AUDMUX_AUD5_RXD = IOMUX_PAD(0x0570, 0x0228, 1, 0x065C, 1, 0), + MX6_PAD_SD1_DATA0__CAAM_WRAPPER_RNG_OSC_OBS = IOMUX_PAD(0x0570, 0x0228, 2, 0x0000, 0, 0), + MX6_PAD_SD1_DATA0__GPT_CAPTURE1 = IOMUX_PAD(0x0570, 0x0228, 3, 0x0000, 0, 0), + MX6_PAD_SD1_DATA0__UART2_RX = IOMUX_PAD(0x0570, 0x0228, 4, 0x0838, 2, 0), + MX6_PAD_SD1_DATA0__GPIO6_IO_2 = IOMUX_PAD(0x0570, 0x0228, 5, 0x0000, 0, 0), + MX6_PAD_SD1_DATA0__ENET1_1588_EVENT1_IN = IOMUX_PAD(0x0570, 0x0228, 6, 0x0000, 0, 0), + MX6_PAD_SD1_DATA0__CCM_OUT2 = IOMUX_PAD(0x0570, 0x0228, 7, 0x0000, 0, 0), + MX6_PAD_SD1_DATA0__VADC_CLAMP_UP = IOMUX_PAD(0x0570, 0x0228, 8, 0x0000, 0, 0), + MX6_PAD_SD1_DATA0__MMDC_DEBUG_48 = IOMUX_PAD(0x0570, 0x0228, 9, 0x0000, 0, 0), + + MX6_PAD_SD1_DATA1__USDHC1_DATA1 = IOMUX_PAD(0x0574, 0x022C, 0, 0x0000, 0, 0), + MX6_PAD_SD1_DATA1__AUDMUX_AUD5_TXC = IOMUX_PAD(0x0574, 0x022C, 1, 0x066C, 1, 0), + MX6_PAD_SD1_DATA1__PWM4_OUT = IOMUX_PAD(0x0574, 0x022C, 2, 0x0000, 0, 0), + MX6_PAD_SD1_DATA1__GPT_CAPTURE2 = IOMUX_PAD(0x0574, 0x022C, 3, 0x0000, 0, 0), + MX6_PAD_SD1_DATA1__UART2_TX = IOMUX_PAD(0x0574, 0x022C, 4, 0x0838, 3, 0), + MX6_PAD_SD1_DATA1__GPIO6_IO_3 = IOMUX_PAD(0x0574, 0x022C, 5, 0x0000, 0, 0), + MX6_PAD_SD1_DATA1__ENET1_1588_EVENT1_OUT = IOMUX_PAD(0x0574, 0x022C, 6, 0x0000, 0, 0), + MX6_PAD_SD1_DATA1__CCM_CLKO2 = IOMUX_PAD(0x0574, 0x022C, 7, 0x0000, 0, 0), + MX6_PAD_SD1_DATA1__VADC_CLAMP_DOWN = IOMUX_PAD(0x0574, 0x022C, 8, 0x0000, 0, 0), + MX6_PAD_SD1_DATA1__MMDC_DEBUG_47 = IOMUX_PAD(0x0574, 0x022C, 9, 0x0000, 0, 0), + + MX6_PAD_SD1_DATA2__USDHC1_DATA2 = IOMUX_PAD(0x0578, 0x0230, 0, 0x0000, 0, 0), + MX6_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS = IOMUX_PAD(0x0578, 0x0230, 1, 0x0670, 1, 0), + MX6_PAD_SD1_DATA2__PWM3_OUT = IOMUX_PAD(0x0578, 0x0230, 2, 0x0000, 0, 0), + MX6_PAD_SD1_DATA2__GPT_COMPARE2 = IOMUX_PAD(0x0578, 0x0230, 3, 0x0000, 0, 0), + MX6_PAD_SD1_DATA2__UART2_CTS_B = IOMUX_PAD(0x0578, 0x0230, 4, 0x0834, 2, 0), + MX6_PAD_SD1_DATA2__GPIO6_IO_4 = IOMUX_PAD(0x0578, 0x0230, 5, 0x0000, 0, 0), + MX6_PAD_SD1_DATA2__ECSPI4_RDY = IOMUX_PAD(0x0578, 0x0230, 6, 0x0000, 0, 0), + MX6_PAD_SD1_DATA2__CCM_OUT0 = IOMUX_PAD(0x0578, 0x0230, 7, 0x0000, 0, 0), + MX6_PAD_SD1_DATA2__VADC_EXT_PD_N = IOMUX_PAD(0x0578, 0x0230, 8, 0x0000, 0, 0), + + MX6_PAD_SD1_DATA3__USDHC1_DATA3 = IOMUX_PAD(0x057C, 0x0234, 0, 0x0000, 0, 0), + MX6_PAD_SD1_DATA3__AUDMUX_AUD5_TXD = IOMUX_PAD(0x057C, 0x0234, 1, 0x0660, 1, 0), + MX6_PAD_SD1_DATA3__AUDMUX_AUD5_RXD = IOMUX_PAD(0x057C, 0x0234, 2, 0x065C, 2, 0), + MX6_PAD_SD1_DATA3__GPT_COMPARE3 = IOMUX_PAD(0x057C, 0x0234, 3, 0x0000, 0, 0), + MX6_PAD_SD1_DATA3__UART2_RTS_B = IOMUX_PAD(0x057C, 0x0234, 4, 0x0834, 3, 0), + MX6_PAD_SD1_DATA3__GPIO6_IO_5 = IOMUX_PAD(0x057C, 0x0234, 5, 0x0000, 0, 0), + MX6_PAD_SD1_DATA3__ECSPI4_SS1 = IOMUX_PAD(0x057C, 0x0234, 6, 0x0000, 0, 0), + MX6_PAD_SD1_DATA3__CCM_PMIC_RDY = IOMUX_PAD(0x057C, 0x0234, 7, 0x069C, 2, 0), + MX6_PAD_SD1_DATA3__VADC_RST_N = IOMUX_PAD(0x057C, 0x0234, 8, 0x0000, 0, 0), + + MX6_PAD_SD2_CLK__USDHC2_CLK = IOMUX_PAD(0x0580, 0x0238, 0, 0x0000, 0, 0), + MX6_PAD_SD2_CLK__AUDMUX_AUD6_RXFS = IOMUX_PAD(0x0580, 0x0238, 1, 0x0680, 2, 0), + MX6_PAD_SD2_CLK__KPP_COL_5 = IOMUX_PAD(0x0580, 0x0238, 2, 0x07C8, 1, 0), + MX6_PAD_SD2_CLK__ECSPI4_SCLK = IOMUX_PAD(0x0580, 0x0238, 3, 0x0740, 1, 0), + MX6_PAD_SD2_CLK__MLB_SIG = IOMUX_PAD(0x0580, 0x0238, 4, 0x07F0, 2, 0), + MX6_PAD_SD2_CLK__GPIO6_IO_6 = IOMUX_PAD(0x0580, 0x0238, 5, 0x0000, 0, 0), + MX6_PAD_SD2_CLK__MQS_RIGHT = IOMUX_PAD(0x0580, 0x0238, 6, 0x0000, 0, 0), + MX6_PAD_SD2_CLK__WDOG1_WDOG_ANY = IOMUX_PAD(0x0580, 0x0238, 7, 0x0000, 0, 0), + MX6_PAD_SD2_CLK__VADC_CLAMP_CURRENT_5 = IOMUX_PAD(0x0580, 0x0238, 8, 0x0000, 0, 0), + MX6_PAD_SD2_CLK__MMDC_DEBUG_29 = IOMUX_PAD(0x0580, 0x0238, 9, 0x0000, 0, 0), + + MX6_PAD_SD2_CMD__USDHC2_CMD = IOMUX_PAD(0x0584, 0x023C, 0, 0x0000, 0, 0), + MX6_PAD_SD2_CMD__AUDMUX_AUD6_RXC = IOMUX_PAD(0x0584, 0x023C, 1, 0x067C, 2, 0), + MX6_PAD_SD2_CMD__KPP_ROW_5 = IOMUX_PAD(0x0584, 0x023C, 2, 0x07D4, 1, 0), + MX6_PAD_SD2_CMD__ECSPI4_MOSI = IOMUX_PAD(0x0584, 0x023C, 3, 0x0748, 1, 0), + MX6_PAD_SD2_CMD__MLB_CLK = IOMUX_PAD(0x0584, 0x023C, 4, 0x07E8, 2, 0), + MX6_PAD_SD2_CMD__GPIO6_IO_7 = IOMUX_PAD(0x0584, 0x023C, 5, 0x0000, 0, 0), + MX6_PAD_SD2_CMD__MQS_LEFT = IOMUX_PAD(0x0584, 0x023C, 6, 0x0000, 0, 0), + MX6_PAD_SD2_CMD__WDOG3_WDOG_B = IOMUX_PAD(0x0584, 0x023C, 7, 0x0000, 0, 0), + MX6_PAD_SD2_CMD__VADC_CLAMP_CURRENT_4 = IOMUX_PAD(0x0584, 0x023C, 8, 0x0000, 0, 0), + MX6_PAD_SD2_CMD__MMDC_DEBUG_30 = IOMUX_PAD(0x0584, 0x023C, 9, 0x0000, 0, 0), + + MX6_PAD_SD2_DATA0__USDHC2_DATA0 = IOMUX_PAD(0x0588, 0x0240, 0, 0x0000, 0, 0), + MX6_PAD_SD2_DATA0__AUDMUX_AUD6_RXD = IOMUX_PAD(0x0588, 0x0240, 1, 0x0674, 2, 0), + MX6_PAD_SD2_DATA0__KPP_ROW_7 = IOMUX_PAD(0x0588, 0x0240, 2, 0x07DC, 1, 0), + MX6_PAD_SD2_DATA0__PWM1_OUT = IOMUX_PAD(0x0588, 0x0240, 3, 0x0000, 0, 0), + MX6_PAD_SD2_DATA0__I2C4_SDA = IOMUX_PAD(0x0588, 0x0240, 4, 0x07C4, 3, 0), + MX6_PAD_SD2_DATA0__GPIO6_IO_8 = IOMUX_PAD(0x0588, 0x0240, 5, 0x0000, 0, 0), + MX6_PAD_SD2_DATA0__ECSPI4_SS3 = IOMUX_PAD(0x0588, 0x0240, 6, 0x0000, 0, 0), + MX6_PAD_SD2_DATA0__UART4_RX = IOMUX_PAD(0x0588, 0x0240, 7, 0x0848, 4, 0), + MX6_PAD_SD2_DATA0__VADC_CLAMP_CURRENT_0 = IOMUX_PAD(0x0588, 0x0240, 8, 0x0000, 0, 0), + MX6_PAD_SD2_DATA0__MMDC_DEBUG_50 = IOMUX_PAD(0x0588, 0x0240, 9, 0x0000, 0, 0), + + MX6_PAD_SD2_DATA1__USDHC2_DATA1 = IOMUX_PAD(0x058C, 0x0244, 0, 0x0000, 0, 0), + MX6_PAD_SD2_DATA1__AUDMUX_AUD6_TXC = IOMUX_PAD(0x058C, 0x0244, 1, 0x0684, 2, 0), + MX6_PAD_SD2_DATA1__KPP_COL_7 = IOMUX_PAD(0x058C, 0x0244, 2, 0x07D0, 1, 0), + MX6_PAD_SD2_DATA1__PWM2_OUT = IOMUX_PAD(0x058C, 0x0244, 3, 0x0000, 0, 0), + MX6_PAD_SD2_DATA1__I2C4_SCL = IOMUX_PAD(0x058C, 0x0244, 4, 0x07C0, 3, 0), + MX6_PAD_SD2_DATA1__GPIO6_IO_9 = IOMUX_PAD(0x058C, 0x0244, 5, 0x0000, 0, 0), + MX6_PAD_SD2_DATA1__ECSPI4_SS2 = IOMUX_PAD(0x058C, 0x0244, 6, 0x0000, 0, 0), + MX6_PAD_SD2_DATA1__UART4_TX = IOMUX_PAD(0x058C, 0x0244, 7, 0x0848, 5, 0), + MX6_PAD_SD2_DATA1__VADC_CLAMP_CURRENT_1 = IOMUX_PAD(0x058C, 0x0244, 8, 0x0000, 0, 0), + MX6_PAD_SD2_DATA1__MMDC_DEBUG_49 = IOMUX_PAD(0x058C, 0x0244, 9, 0x0000, 0, 0), + + MX6_PAD_SD2_DATA2__USDHC2_DATA2 = IOMUX_PAD(0x0590, 0x0248, 0, 0x0000, 0, 0), + MX6_PAD_SD2_DATA2__AUDMUX_AUD6_TXFS = IOMUX_PAD(0x0590, 0x0248, 1, 0x0688, 2, 0), + MX6_PAD_SD2_DATA2__KPP_ROW_6 = IOMUX_PAD(0x0590, 0x0248, 2, 0x07D8, 1, 0), + MX6_PAD_SD2_DATA2__ECSPI4_SS0 = IOMUX_PAD(0x0590, 0x0248, 3, 0x074C, 1, 0), + MX6_PAD_SD2_DATA2__SDMA_EXT_EVENT_0 = IOMUX_PAD(0x0590, 0x0248, 4, 0x081C, 2, 0), + MX6_PAD_SD2_DATA2__GPIO6_IO_10 = IOMUX_PAD(0x0590, 0x0248, 5, 0x0000, 0, 0), + MX6_PAD_SD2_DATA2__SPDIF_OUT = IOMUX_PAD(0x0590, 0x0248, 6, 0x0000, 0, 0), + MX6_PAD_SD2_DATA2__UART6_RX = IOMUX_PAD(0x0590, 0x0248, 7, 0x0858, 4, 0), + MX6_PAD_SD2_DATA2__VADC_CLAMP_CURRENT_2 = IOMUX_PAD(0x0590, 0x0248, 8, 0x0000, 0, 0), + MX6_PAD_SD2_DATA2__MMDC_DEBUG_32 = IOMUX_PAD(0x0590, 0x0248, 9, 0x0000, 0, 0), + + MX6_PAD_SD2_DATA3__USDHC2_DATA3 = IOMUX_PAD(0x0594, 0x024C, 0, 0x0000, 0, 0), + MX6_PAD_SD2_DATA3__AUDMUX_AUD6_TXD = IOMUX_PAD(0x0594, 0x024C, 1, 0x0678, 2, 0), + MX6_PAD_SD2_DATA3__KPP_COL_6 = IOMUX_PAD(0x0594, 0x024C, 2, 0x07CC, 1, 0), + MX6_PAD_SD2_DATA3__ECSPI4_MISO = IOMUX_PAD(0x0594, 0x024C, 3, 0x0744, 1, 0), + MX6_PAD_SD2_DATA3__MLB_DATA = IOMUX_PAD(0x0594, 0x024C, 4, 0x07EC, 2, 0), + MX6_PAD_SD2_DATA3__GPIO6_IO_11 = IOMUX_PAD(0x0594, 0x024C, 5, 0x0000, 0, 0), + MX6_PAD_SD2_DATA3__SPDIF_IN = IOMUX_PAD(0x0594, 0x024C, 6, 0x0824, 4, 0), + MX6_PAD_SD2_DATA3__UART6_TX = IOMUX_PAD(0x0594, 0x024C, 7, 0x0858, 5, 0), + MX6_PAD_SD2_DATA3__VADC_CLAMP_CURRENT_3 = IOMUX_PAD(0x0594, 0x024C, 8, 0x0000, 0, 0), + MX6_PAD_SD2_DATA3__MMDC_DEBUG_31 = IOMUX_PAD(0x0594, 0x024C, 9, 0x0000, 0, 0), + + MX6_PAD_SD3_CLK__USDHC3_CLK = IOMUX_PAD(0x0598, 0x0250, 0, 0x0000, 0, 0), + MX6_PAD_SD3_CLK__UART4_CTS_B = IOMUX_PAD(0x0598, 0x0250, 1, 0x0844, 0, 0), + MX6_PAD_SD3_CLK__ECSPI4_SCLK = IOMUX_PAD(0x0598, 0x0250, 2, 0x0740, 0, 0), + MX6_PAD_SD3_CLK__AUDMUX_AUD6_RXFS = IOMUX_PAD(0x0598, 0x0250, 3, 0x0680, 0, 0), + MX6_PAD_SD3_CLK__LCDIF2_VSYNC = IOMUX_PAD(0x0598, 0x0250, 4, 0x0000, 0, 0), + MX6_PAD_SD3_CLK__GPIO7_IO_0 = IOMUX_PAD(0x0598, 0x0250, 5, 0x0000, 0, 0), + MX6_PAD_SD3_CLK__LCDIF2_BUSY = IOMUX_PAD(0x0598, 0x0250, 6, 0x07E4, 0, 0), + MX6_PAD_SD3_CLK__TPSMP_HDATA_29 = IOMUX_PAD(0x0598, 0x0250, 7, 0x0000, 0, 0), + MX6_PAD_SD3_CLK__SDMA_DEBUG_EVENT_CHANNEL_5 = IOMUX_PAD(0x0598, 0x0250, 9, 0x0000, 0, 0), + + MX6_PAD_SD3_CMD__USDHC3_CMD = IOMUX_PAD(0x059C, 0x0254, 0, 0x0000, 0, 0), + MX6_PAD_SD3_CMD__UART4_TX = IOMUX_PAD(0x059C, 0x0254, 1, 0x0848, 0, 0), + MX6_PAD_SD3_CMD__ECSPI4_MOSI = IOMUX_PAD(0x059C, 0x0254, 2, 0x0748, 0, 0), + MX6_PAD_SD3_CMD__AUDMUX_AUD6_RXC = IOMUX_PAD(0x059C, 0x0254, 3, 0x067C, 0, 0), + MX6_PAD_SD3_CMD__LCDIF2_HSYNC = IOMUX_PAD(0x059C, 0x0254, 4, 0x07E4, 1, 0), + MX6_PAD_SD3_CMD__GPIO7_IO_1 = IOMUX_PAD(0x059C, 0x0254, 5, 0x0000, 0, 0), + MX6_PAD_SD3_CMD__LCDIF2_RS = IOMUX_PAD(0x059C, 0x0254, 6, 0x0000, 0, 0), + MX6_PAD_SD3_CMD__TPSMP_HDATA_28 = IOMUX_PAD(0x059C, 0x0254, 7, 0x0000, 0, 0), + MX6_PAD_SD3_CMD__SDMA_DEBUG_EVENT_CHANNEL_4 = IOMUX_PAD(0x059C, 0x0254, 9, 0x0000, 0, 0), + + MX6_PAD_SD3_DATA0__USDHC3_DATA0 = IOMUX_PAD(0x05A0, 0x0258, 0, 0x0000, 0, 0), + MX6_PAD_SD3_DATA0__I2C4_SCL = IOMUX_PAD(0x05A0, 0x0258, 1, 0x07C0, 0, 0), + MX6_PAD_SD3_DATA0__ECSPI2_SS1 = IOMUX_PAD(0x05A0, 0x0258, 2, 0x0000, 0, 0), + MX6_PAD_SD3_DATA0__AUDMUX_AUD6_RXD = IOMUX_PAD(0x05A0, 0x0258, 3, 0x0674, 0, 0), + MX6_PAD_SD3_DATA0__LCDIF2_DATA_1 = IOMUX_PAD(0x05A0, 0x0258, 4, 0x0000, 0, 0), + MX6_PAD_SD3_DATA0__GPIO7_IO_2 = IOMUX_PAD(0x05A0, 0x0258, 5, 0x0000, 0, 0), + MX6_PAD_SD3_DATA0__DCIC1_OUT = IOMUX_PAD(0x05A0, 0x0258, 6, 0x0000, 0, 0), + MX6_PAD_SD3_DATA0__TPSMP_HDATA_30 = IOMUX_PAD(0x05A0, 0x0258, 7, 0x0000, 0, 0), + MX6_PAD_SD3_DATA0__GPU_DEBUG_0 = IOMUX_PAD(0x05A0, 0x0258, 8, 0x0000, 0, 0), + MX6_PAD_SD3_DATA0__SDMA_DEBUG_EVT_CHN_LINES_0 = IOMUX_PAD(0x05A0, 0x0258, 9, 0x0000, 0, 0), + + MX6_PAD_SD3_DATA1__USDHC3_DATA1 = IOMUX_PAD(0x05A4, 0x025C, 0, 0x0000, 0, 0), + MX6_PAD_SD3_DATA1__I2C4_SDA = IOMUX_PAD(0x05A4, 0x025C, 1, 0x07C4, 0, 0), + MX6_PAD_SD3_DATA1__ECSPI2_SS2 = IOMUX_PAD(0x05A4, 0x025C, 2, 0x0000, 0, 0), + MX6_PAD_SD3_DATA1__AUDMUX_AUD6_TXC = IOMUX_PAD(0x05A4, 0x025C, 3, 0x0684, 0, 0), + MX6_PAD_SD3_DATA1__LCDIF2_DATA_0 = IOMUX_PAD(0x05A4, 0x025C, 4, 0x0000, 0, 0), + MX6_PAD_SD3_DATA1__GPIO7_IO_3 = IOMUX_PAD(0x05A4, 0x025C, 5, 0x0000, 0, 0), + MX6_PAD_SD3_DATA1__DCIC2_OUT = IOMUX_PAD(0x05A4, 0x025C, 6, 0x0000, 0, 0), + MX6_PAD_SD3_DATA1__TPSMP_HDATA_31 = IOMUX_PAD(0x05A4, 0x025C, 7, 0x0000, 0, 0), + MX6_PAD_SD3_DATA1__GPU_DEBUG_1 = IOMUX_PAD(0x05A4, 0x025C, 8, 0x0000, 0, 0), + MX6_PAD_SD3_DATA1__SDMA_DEBUG_EVT_CHN_LINES_1 = IOMUX_PAD(0x05A4, 0x025C, 9, 0x0000, 0, 0), + + MX6_PAD_SD3_DATA2__USDHC3_DATA2 = IOMUX_PAD(0x05A8, 0x0260, 0, 0x0000, 0, 0), + MX6_PAD_SD3_DATA2__UART4_RTS_B = IOMUX_PAD(0x05A8, 0x0260, 1, 0x0844, 1, 0), + MX6_PAD_SD3_DATA2__ECSPI4_SS0 = IOMUX_PAD(0x05A8, 0x0260, 2, 0x074C, 0, 0), + MX6_PAD_SD3_DATA2__AUDMUX_AUD6_TXFS = IOMUX_PAD(0x05A8, 0x0260, 3, 0x0688, 0, 0), + MX6_PAD_SD3_DATA2__LCDIF2_CLK = IOMUX_PAD(0x05A8, 0x0260, 4, 0x0000, 0, 0), + MX6_PAD_SD3_DATA2__GPIO7_IO_4 = IOMUX_PAD(0x05A8, 0x0260, 5, 0x0000, 0, 0), + MX6_PAD_SD3_DATA2__LCDIF2_WR_RWN = IOMUX_PAD(0x05A8, 0x0260, 6, 0x0000, 0, 0), + MX6_PAD_SD3_DATA2__TPSMP_HDATA_26 = IOMUX_PAD(0x05A8, 0x0260, 7, 0x0000, 0, 0), + MX6_PAD_SD3_DATA2__GPU_DEBUG_2 = IOMUX_PAD(0x05A8, 0x0260, 8, 0x0000, 0, 0), + MX6_PAD_SD3_DATA2__SDMA_DEBUG_EVENT_CHANNEL_2 = IOMUX_PAD(0x05A8, 0x0260, 9, 0x0000, 0, 0), + + MX6_PAD_SD3_DATA3__USDHC3_DATA3 = IOMUX_PAD(0x05AC, 0x0264, 0, 0x0000, 0, 0), + MX6_PAD_SD3_DATA3__UART4_RX = IOMUX_PAD(0x05AC, 0x0264, 1, 0x0848, 1, 0), + MX6_PAD_SD3_DATA3__ECSPI4_MISO = IOMUX_PAD(0x05AC, 0x0264, 2, 0x0744, 0, 0), + MX6_PAD_SD3_DATA3__AUDMUX_AUD6_TXD = IOMUX_PAD(0x05AC, 0x0264, 3, 0x0678, 0, 0), + MX6_PAD_SD3_DATA3__LCDIF2_ENABLE = IOMUX_PAD(0x05AC, 0x0264, 4, 0x0000, 0, 0), + MX6_PAD_SD3_DATA3__GPIO7_IO_5 = IOMUX_PAD(0x05AC, 0x0264, 5, 0x0000, 0, 0), + MX6_PAD_SD3_DATA3__LCDIF2_RD_E = IOMUX_PAD(0x05AC, 0x0264, 6, 0x0000, 0, 0), + MX6_PAD_SD3_DATA3__TPSMP_HDATA_27 = IOMUX_PAD(0x05AC, 0x0264, 7, 0x0000, 0, 0), + MX6_PAD_SD3_DATA3__GPU_DEBUG_3 = IOMUX_PAD(0x05AC, 0x0264, 8, 0x0000, 0, 0), + MX6_PAD_SD3_DATA3__SDMA_DEBUG_EVENT_CHANNEL_3 = IOMUX_PAD(0x05AC, 0x0264, 9, 0x0000, 0, 0), + + MX6_PAD_SD3_DATA4__USDHC3_DATA4 = IOMUX_PAD(0x05B0, 0x0268, 0, 0x0000, 0, 0), + MX6_PAD_SD3_DATA4__CAN2_RX = IOMUX_PAD(0x05B0, 0x0268, 1, 0x0690, 0, 0), + MX6_PAD_SD3_DATA4__CANFD_RX2 = IOMUX_PAD(0x05B0, 0x0268, 2, 0x0698, 0, 0), + MX6_PAD_SD3_DATA4__UART3_RX = IOMUX_PAD(0x05B0, 0x0268, 3, 0x0840, 2, 0), + MX6_PAD_SD3_DATA4__LCDIF2_DATA_3 = IOMUX_PAD(0x05B0, 0x0268, 4, 0x0000, 0, 0), + MX6_PAD_SD3_DATA4__GPIO7_IO_6 = IOMUX_PAD(0x05B0, 0x0268, 5, 0x0000, 0, 0), + MX6_PAD_SD3_DATA4__ENET2_1588_EVENT0_IN = IOMUX_PAD(0x05B0, 0x0268, 6, 0x0000, 0, 0), + MX6_PAD_SD3_DATA4__TPSMP_HTRANS_1 = IOMUX_PAD(0x05B0, 0x0268, 7, 0x0000, 0, 0), + MX6_PAD_SD3_DATA4__GPU_DEBUG_4 = IOMUX_PAD(0x05B0, 0x0268, 8, 0x0000, 0, 0), + MX6_PAD_SD3_DATA4__SDMA_DEBUG_BUS_DEVICE_0 = IOMUX_PAD(0x05B0, 0x0268, 9, 0x0000, 0, 0), + + MX6_PAD_SD3_DATA5__USDHC3_DATA5 = IOMUX_PAD(0x05B4, 0x026C, 0, 0x0000, 0, 0), + MX6_PAD_SD3_DATA5__CAN1_TX = IOMUX_PAD(0x05B4, 0x026C, 1, 0x0000, 0, 0), + MX6_PAD_SD3_DATA5__CANFD_TX1 = IOMUX_PAD(0x05B4, 0x026C, 2, 0x0000, 0, 0), + MX6_PAD_SD3_DATA5__UART3_TX = IOMUX_PAD(0x05B4, 0x026C, 3, 0x0840, 3, 0), + MX6_PAD_SD3_DATA5__LCDIF2_DATA_2 = IOMUX_PAD(0x05B4, 0x026C, 4, 0x0000, 0, 0), + MX6_PAD_SD3_DATA5__GPIO7_IO_7 = IOMUX_PAD(0x05B4, 0x026C, 5, 0x0000, 0, 0), + MX6_PAD_SD3_DATA5__ENET2_1588_EVENT0_OUT = IOMUX_PAD(0x05B4, 0x026C, 6, 0x0000, 0, 0), + MX6_PAD_SD3_DATA5__SIM_M_HWRITE = IOMUX_PAD(0x05B4, 0x026C, 7, 0x0000, 0, 0), + MX6_PAD_SD3_DATA5__GPU_DEBUG_5 = IOMUX_PAD(0x05B4, 0x026C, 8, 0x0000, 0, 0), + MX6_PAD_SD3_DATA5__SDMA_DEBUG_BUS_DEVICE_1 = IOMUX_PAD(0x05B4, 0x026C, 9, 0x0000, 0, 0), + + MX6_PAD_SD3_DATA6__USDHC3_DATA6 = IOMUX_PAD(0x05B8, 0x0270, 0, 0x0000, 0, 0), + MX6_PAD_SD3_DATA6__CAN2_TX = IOMUX_PAD(0x05B8, 0x0270, 1, 0x0000, 0, 0), + MX6_PAD_SD3_DATA6__CANFD_TX2 = IOMUX_PAD(0x05B8, 0x0270, 2, 0x0000, 0, 0), + MX6_PAD_SD3_DATA6__UART3_RTS_B = IOMUX_PAD(0x05B8, 0x0270, 3, 0x083C, 2, 0), + MX6_PAD_SD3_DATA6__LCDIF2_DATA_4 = IOMUX_PAD(0x05B8, 0x0270, 4, 0x0000, 0, 0), + MX6_PAD_SD3_DATA6__GPIO7_IO_8 = IOMUX_PAD(0x05B8, 0x0270, 5, 0x0000, 0, 0), + MX6_PAD_SD3_DATA6__ENET1_1588_EVENT0_OUT = IOMUX_PAD(0x05B8, 0x0270, 6, 0x0000, 0, 0), + MX6_PAD_SD3_DATA6__TPSMP_HTRANS_0 = IOMUX_PAD(0x05B8, 0x0270, 7, 0x0000, 0, 0), + MX6_PAD_SD3_DATA6__GPU_DEBUG_7 = IOMUX_PAD(0x05B8, 0x0270, 8, 0x0000, 0, 0), + MX6_PAD_SD3_DATA6__SDMA_DEBUG_EVT_CHN_LINES_7 = IOMUX_PAD(0x05B8, 0x0270, 9, 0x0000, 0, 0), + + MX6_PAD_SD3_DATA7__USDHC3_DATA7 = IOMUX_PAD(0x05BC, 0x0274, 0, 0x0000, 0, 0), + MX6_PAD_SD3_DATA7__CAN1_RX = IOMUX_PAD(0x05BC, 0x0274, 1, 0x068C, 0, 0), + MX6_PAD_SD3_DATA7__CANFD_RX1 = IOMUX_PAD(0x05BC, 0x0274, 2, 0x0694, 0, 0), + MX6_PAD_SD3_DATA7__UART3_CTS_B = IOMUX_PAD(0x05BC, 0x0274, 3, 0x083C, 3, 0), + MX6_PAD_SD3_DATA7__LCDIF2_DATA_5 = IOMUX_PAD(0x05BC, 0x0274, 4, 0x0000, 0, 0), + MX6_PAD_SD3_DATA7__GPIO7_IO_9 = IOMUX_PAD(0x05BC, 0x0274, 5, 0x0000, 0, 0), + MX6_PAD_SD3_DATA7__ENET1_1588_EVENT0_IN = IOMUX_PAD(0x05BC, 0x0274, 6, 0x0000, 0, 0), + MX6_PAD_SD3_DATA7__TPSMP_HDATA_DIR = IOMUX_PAD(0x05BC, 0x0274, 7, 0x0000, 0, 0), + MX6_PAD_SD3_DATA7__GPU_DEBUG_6 = IOMUX_PAD(0x05BC, 0x0274, 8, 0x0000, 0, 0), + MX6_PAD_SD3_DATA7__SDMA_DEBUG_EVT_CHN_LINES_2 = IOMUX_PAD(0x05BC, 0x0274, 9, 0x0000, 0, 0), + + MX6_PAD_SD4_CLK__USDHC4_CLK = IOMUX_PAD(0x05C0, 0x0278, 0, 0x0000, 0, 0), + MX6_PAD_SD4_CLK__RAWNAND_DATA15 = IOMUX_PAD(0x05C0, 0x0278, 1, 0x0000, 0, 0), + MX6_PAD_SD4_CLK__ECSPI2_MISO = IOMUX_PAD(0x05C0, 0x0278, 2, 0x0724, 1, 0), + MX6_PAD_SD4_CLK__AUDMUX_AUD3_RXFS = IOMUX_PAD(0x05C0, 0x0278, 3, 0x0638, 0, 0), + MX6_PAD_SD4_CLK__LCDIF2_DATA_13 = IOMUX_PAD(0x05C0, 0x0278, 4, 0x0000, 0, 0), + MX6_PAD_SD4_CLK__GPIO6_IO_12 = IOMUX_PAD(0x05C0, 0x0278, 5, 0x0000, 0, 0), + MX6_PAD_SD4_CLK__ECSPI3_SS2 = IOMUX_PAD(0x05C0, 0x0278, 6, 0x0000, 0, 0), + MX6_PAD_SD4_CLK__TPSMP_HDATA_20 = IOMUX_PAD(0x05C0, 0x0278, 7, 0x0000, 0, 0), + MX6_PAD_SD4_CLK__VDEC_DEBUG_12 = IOMUX_PAD(0x05C0, 0x0278, 8, 0x0000, 0, 0), + MX6_PAD_SD4_CLK__SDMA_DEBUG_EVENT_CHANNEL_SEL = IOMUX_PAD(0x05C0, 0x0278, 9, 0x0000, 0, 0), + + MX6_PAD_SD4_CMD__USDHC4_CMD = IOMUX_PAD(0x05C4, 0x027C, 0, 0x0000, 0, 0), + MX6_PAD_SD4_CMD__RAWNAND_DATA14 = IOMUX_PAD(0x05C4, 0x027C, 1, 0x0000, 0, 0), + MX6_PAD_SD4_CMD__ECSPI2_MOSI = IOMUX_PAD(0x05C4, 0x027C, 2, 0x0728, 1, 0), + MX6_PAD_SD4_CMD__AUDMUX_AUD3_RXC = IOMUX_PAD(0x05C4, 0x027C, 3, 0x0634, 0, 0), + MX6_PAD_SD4_CMD__LCDIF2_DATA_14 = IOMUX_PAD(0x05C4, 0x027C, 4, 0x0000, 0, 0), + MX6_PAD_SD4_CMD__GPIO6_IO_13 = IOMUX_PAD(0x05C4, 0x027C, 5, 0x0000, 0, 0), + MX6_PAD_SD4_CMD__ECSPI3_SS1 = IOMUX_PAD(0x05C4, 0x027C, 6, 0x0000, 0, 0), + MX6_PAD_SD4_CMD__TPSMP_HDATA_19 = IOMUX_PAD(0x05C4, 0x027C, 7, 0x0000, 0, 0), + MX6_PAD_SD4_CMD__VDEC_DEBUG_11 = IOMUX_PAD(0x05C4, 0x027C, 8, 0x0000, 0, 0), + MX6_PAD_SD4_CMD__SDMA_DEBUG_CORE_RUN = IOMUX_PAD(0x05C4, 0x027C, 9, 0x0000, 0, 0), + + MX6_PAD_SD4_DATA0__USDHC4_DATA0 = IOMUX_PAD(0x05C8, 0x0280, 0, 0x0000, 0, 0), + MX6_PAD_SD4_DATA0__RAWNAND_DATA10 = IOMUX_PAD(0x05C8, 0x0280, 1, 0x0000, 0, 0), + MX6_PAD_SD4_DATA0__ECSPI2_SS0 = IOMUX_PAD(0x05C8, 0x0280, 2, 0x072C, 1, 0), + MX6_PAD_SD4_DATA0__AUDMUX_AUD3_RXD = IOMUX_PAD(0x05C8, 0x0280, 3, 0x062C, 0, 0), + MX6_PAD_SD4_DATA0__LCDIF2_DATA_12 = IOMUX_PAD(0x05C8, 0x0280, 4, 0x0000, 0, 0), + MX6_PAD_SD4_DATA0__GPIO6_IO_14 = IOMUX_PAD(0x05C8, 0x0280, 5, 0x0000, 0, 0), + MX6_PAD_SD4_DATA0__ECSPI3_SS3 = IOMUX_PAD(0x05C8, 0x0280, 6, 0x0000, 0, 0), + MX6_PAD_SD4_DATA0__TPSMP_HDATA_21 = IOMUX_PAD(0x05C8, 0x0280, 7, 0x0000, 0, 0), + MX6_PAD_SD4_DATA0__VDEC_DEBUG_13 = IOMUX_PAD(0x05C8, 0x0280, 8, 0x0000, 0, 0), + MX6_PAD_SD4_DATA0__SDMA_DEBUG_MODE = IOMUX_PAD(0x05C8, 0x0280, 9, 0x0000, 0, 0), + + MX6_PAD_SD4_DATA1__USDHC4_DATA1 = IOMUX_PAD(0x05CC, 0x0284, 0, 0x0000, 0, 0), + MX6_PAD_SD4_DATA1__RAWNAND_DATA11 = IOMUX_PAD(0x05CC, 0x0284, 1, 0x0000, 0, 0), + MX6_PAD_SD4_DATA1__ECSPI2_SCLK = IOMUX_PAD(0x05CC, 0x0284, 2, 0x0720, 1, 0), + MX6_PAD_SD4_DATA1__AUDMUX_AUD3_TXC = IOMUX_PAD(0x05CC, 0x0284, 3, 0x063C, 0, 0), + MX6_PAD_SD4_DATA1__LCDIF2_DATA_11 = IOMUX_PAD(0x05CC, 0x0284, 4, 0x0000, 0, 0), + MX6_PAD_SD4_DATA1__GPIO6_IO_15 = IOMUX_PAD(0x05CC, 0x0284, 5, 0x0000, 0, 0), + MX6_PAD_SD4_DATA1__ECSPI3_RDY = IOMUX_PAD(0x05CC, 0x0284, 6, 0x0000, 0, 0), + MX6_PAD_SD4_DATA1__TPSMP_HDATA_22 = IOMUX_PAD(0x05CC, 0x0284, 7, 0x0000, 0, 0), + MX6_PAD_SD4_DATA1__VDEC_DEBUG_14 = IOMUX_PAD(0x05CC, 0x0284, 8, 0x0000, 0, 0), + MX6_PAD_SD4_DATA1__SDMA_DEBUG_BUS_ERROR = IOMUX_PAD(0x05CC, 0x0284, 9, 0x0000, 0, 0), + + MX6_PAD_SD4_DATA2__USDHC4_DATA2 = IOMUX_PAD(0x05D0, 0x0288, 0, 0x0000, 0, 0), + MX6_PAD_SD4_DATA2__RAWNAND_DATA12 = IOMUX_PAD(0x05D0, 0x0288, 1, 0x0000, 0, 0), + MX6_PAD_SD4_DATA2__I2C2_SDA = IOMUX_PAD(0x05D0, 0x0288, 2, 0x07B4, 0, 0), + MX6_PAD_SD4_DATA2__AUDMUX_AUD3_TXFS = IOMUX_PAD(0x05D0, 0x0288, 3, 0x0640, 0, 0), + MX6_PAD_SD4_DATA2__LCDIF2_DATA_10 = IOMUX_PAD(0x05D0, 0x0288, 4, 0x0000, 0, 0), + MX6_PAD_SD4_DATA2__GPIO6_IO_16 = IOMUX_PAD(0x05D0, 0x0288, 5, 0x0000, 0, 0), + MX6_PAD_SD4_DATA2__ECSPI2_SS3 = IOMUX_PAD(0x05D0, 0x0288, 6, 0x0000, 0, 0), + MX6_PAD_SD4_DATA2__TPSMP_HDATA_23 = IOMUX_PAD(0x05D0, 0x0288, 7, 0x0000, 0, 0), + MX6_PAD_SD4_DATA2__VDEC_DEBUG_15 = IOMUX_PAD(0x05D0, 0x0288, 8, 0x0000, 0, 0), + MX6_PAD_SD4_DATA2__SDMA_DEBUG_BUS_RWB = IOMUX_PAD(0x05D0, 0x0288, 9, 0x0000, 0, 0), + + MX6_PAD_SD4_DATA3__USDHC4_DATA3 = IOMUX_PAD(0x05D4, 0x028C, 0, 0x0000, 0, 0), + MX6_PAD_SD4_DATA3__RAWNAND_DATA13 = IOMUX_PAD(0x05D4, 0x028C, 1, 0x0000, 0, 0), + MX6_PAD_SD4_DATA3__I2C2_SCL = IOMUX_PAD(0x05D4, 0x028C, 2, 0x07B0, 0, 0), + MX6_PAD_SD4_DATA3__AUDMUX_AUD3_TXD = IOMUX_PAD(0x05D4, 0x028C, 3, 0x0630, 0, 0), + MX6_PAD_SD4_DATA3__LCDIF2_DATA_9 = IOMUX_PAD(0x05D4, 0x028C, 4, 0x0000, 0, 0), + MX6_PAD_SD4_DATA3__GPIO6_IO_17 = IOMUX_PAD(0x05D4, 0x028C, 5, 0x0000, 0, 0), + MX6_PAD_SD4_DATA3__ECSPI2_RDY = IOMUX_PAD(0x05D4, 0x028C, 6, 0x0000, 0, 0), + MX6_PAD_SD4_DATA3__TPSMP_HDATA_24 = IOMUX_PAD(0x05D4, 0x028C, 7, 0x0000, 0, 0), + MX6_PAD_SD4_DATA3__VDEC_DEBUG_16 = IOMUX_PAD(0x05D4, 0x028C, 8, 0x0000, 0, 0), + MX6_PAD_SD4_DATA3__SDMA_DEBUG_MATCHED_DMBUS = IOMUX_PAD(0x05D4, 0x028C, 9, 0x0000, 0, 0), + + MX6_PAD_SD4_DATA4__USDHC4_DATA4 = IOMUX_PAD(0x05D8, 0x0290, 0, 0x0000, 0, 0), + MX6_PAD_SD4_DATA4__RAWNAND_DATA09 = IOMUX_PAD(0x05D8, 0x0290, 1, 0x0000, 0, 0), + MX6_PAD_SD4_DATA4__UART5_RX = IOMUX_PAD(0x05D8, 0x0290, 2, 0x0850, 0, 0), + MX6_PAD_SD4_DATA4__ECSPI3_SCLK = IOMUX_PAD(0x05D8, 0x0290, 3, 0x0730, 0, 0), + MX6_PAD_SD4_DATA4__LCDIF2_DATA_8 = IOMUX_PAD(0x05D8, 0x0290, 4, 0x0000, 0, 0), + MX6_PAD_SD4_DATA4__GPIO6_IO_18 = IOMUX_PAD(0x05D8, 0x0290, 5, 0x0000, 0, 0), + MX6_PAD_SD4_DATA4__SPDIF_OUT = IOMUX_PAD(0x05D8, 0x0290, 6, 0x0000, 0, 0), + MX6_PAD_SD4_DATA4__TPSMP_HDATA_16 = IOMUX_PAD(0x05D8, 0x0290, 7, 0x0000, 0, 0), + MX6_PAD_SD4_DATA4__USB_OTG_HOST_MODE = IOMUX_PAD(0x05D8, 0x0290, 8, 0x0000, 0, 0), + MX6_PAD_SD4_DATA4__SDMA_DEBUG_RTBUFFER_WRITE = IOMUX_PAD(0x05D8, 0x0290, 9, 0x0000, 0, 0), + + MX6_PAD_SD4_DATA5__USDHC4_DATA5 = IOMUX_PAD(0x05DC, 0x0294, 0, 0x0000, 0, 0), + MX6_PAD_SD4_DATA5__RAWNAND_CE2_B = IOMUX_PAD(0x05DC, 0x0294, 1, 0x0000, 0, 0), + MX6_PAD_SD4_DATA5__UART5_TX = IOMUX_PAD(0x05DC, 0x0294, 2, 0x0850, 1, 0), + MX6_PAD_SD4_DATA5__ECSPI3_MOSI = IOMUX_PAD(0x05DC, 0x0294, 3, 0x0738, 0, 0), + MX6_PAD_SD4_DATA5__LCDIF2_DATA_7 = IOMUX_PAD(0x05DC, 0x0294, 4, 0x0000, 0, 0), + MX6_PAD_SD4_DATA5__GPIO6_IO_19 = IOMUX_PAD(0x05DC, 0x0294, 5, 0x0000, 0, 0), + MX6_PAD_SD4_DATA5__SPDIF_IN = IOMUX_PAD(0x05DC, 0x0294, 6, 0x0824, 0, 0), + MX6_PAD_SD4_DATA5__TPSMP_HDATA_17 = IOMUX_PAD(0x05DC, 0x0294, 7, 0x0000, 0, 0), + MX6_PAD_SD4_DATA5__VDEC_DEBUG_9 = IOMUX_PAD(0x05DC, 0x0294, 8, 0x0000, 0, 0), + MX6_PAD_SD4_DATA5__SDMA_DEBUG_EVENT_CHANNEL_0 = IOMUX_PAD(0x05DC, 0x0294, 9, 0x0000, 0, 0), + + MX6_PAD_SD4_DATA6__USDHC4_DATA6 = IOMUX_PAD(0x05E0, 0x0298, 0, 0x0000, 0, 0), + MX6_PAD_SD4_DATA6__RAWNAND_CE3_B = IOMUX_PAD(0x05E0, 0x0298, 1, 0x0000, 0, 0), + MX6_PAD_SD4_DATA6__UART5_RTS_B = IOMUX_PAD(0x05E0, 0x0298, 2, 0x084C, 0, 0), + MX6_PAD_SD4_DATA6__ECSPI3_MISO = IOMUX_PAD(0x05E0, 0x0298, 3, 0x0734, 0, 0), + MX6_PAD_SD4_DATA6__LCDIF2_DATA_6 = IOMUX_PAD(0x05E0, 0x0298, 4, 0x0000, 0, 0), + MX6_PAD_SD4_DATA6__GPIO6_IO_20 = IOMUX_PAD(0x05E0, 0x0298, 5, 0x0000, 0, 0), + MX6_PAD_SD4_DATA6__USDHC4_WP = IOMUX_PAD(0x05E0, 0x0298, 6, 0x0878, 0, 0), + MX6_PAD_SD4_DATA6__TPSMP_HDATA_18 = IOMUX_PAD(0x05E0, 0x0298, 7, 0x0000, 0, 0), + MX6_PAD_SD4_DATA6__VDEC_DEBUG_10 = IOMUX_PAD(0x05E0, 0x0298, 8, 0x0000, 0, 0), + MX6_PAD_SD4_DATA6__SDMA_DEBUG_EVENT_CHANNEL_1 = IOMUX_PAD(0x05E0, 0x0298, 9, 0x0000, 0, 0), + + MX6_PAD_SD4_DATA7__USDHC4_DATA7 = IOMUX_PAD(0x05E4, 0x029C, 0, 0x0000, 0, 0), + MX6_PAD_SD4_DATA7__RAWNAND_DATA08 = IOMUX_PAD(0x05E4, 0x029C, 1, 0x0000, 0, 0), + MX6_PAD_SD4_DATA7__UART5_CTS_B = IOMUX_PAD(0x05E4, 0x029C, 2, 0x084C, 1, 0), + MX6_PAD_SD4_DATA7__ECSPI3_SS0 = IOMUX_PAD(0x05E4, 0x029C, 3, 0x073C, 0, 0), + MX6_PAD_SD4_DATA7__LCDIF2_DATA_15 = IOMUX_PAD(0x05E4, 0x029C, 4, 0x0000, 0, 0), + MX6_PAD_SD4_DATA7__GPIO6_IO_21 = IOMUX_PAD(0x05E4, 0x029C, 5, 0x0000, 0, 0), + MX6_PAD_SD4_DATA7__USDHC4_CD_B = IOMUX_PAD(0x05E4, 0x029C, 6, 0x0874, 0, 0), + MX6_PAD_SD4_DATA7__TPSMP_HDATA_15 = IOMUX_PAD(0x05E4, 0x029C, 7, 0x0000, 0, 0), + MX6_PAD_SD4_DATA7__USB_OTG_PWR_WAKE = IOMUX_PAD(0x05E4, 0x029C, 8, 0x0000, 0, 0), + MX6_PAD_SD4_DATA7__SDMA_DEBUG_YIELD = IOMUX_PAD(0x05E4, 0x029C, 9, 0x0000, 0, 0), + + MX6_PAD_SD4_RESET_B__USDHC4_RESET_B = IOMUX_PAD(0x05E8, 0x02A0, 0, 0x0000, 0, 0), + MX6_PAD_SD4_RESET_B__RAWNAND_DQS = IOMUX_PAD(0x05E8, 0x02A0, 1, 0x0000, 0, 0), + MX6_PAD_SD4_RESET_B__USDHC4_RESET = IOMUX_PAD(0x05E8, 0x02A0, 2, 0x0000, 0, 0), + MX6_PAD_SD4_RESET_B__AUDMUX_MCLK = IOMUX_PAD(0x05E8, 0x02A0, 3, 0x0000, 0, 0), + MX6_PAD_SD4_RESET_B__LCDIF2_RESET = IOMUX_PAD(0x05E8, 0x02A0, 4, 0x0000, 0, 0), + MX6_PAD_SD4_RESET_B__GPIO6_IO_22 = IOMUX_PAD(0x05E8, 0x02A0, 5, 0x0000, 0, 0), + MX6_PAD_SD4_RESET_B__LCDIF2_CS = IOMUX_PAD(0x05E8, 0x02A0, 6, 0x0000, 0, 0), + MX6_PAD_SD4_RESET_B__TPSMP_HDATA_25 = IOMUX_PAD(0x05E8, 0x02A0, 7, 0x0000, 0, 0), + MX6_PAD_SD4_RESET_B__VDEC_DEBUG_17 = IOMUX_PAD(0x05E8, 0x02A0, 8, 0x0000, 0, 0), + MX6_PAD_SD4_RESET_B__SDMA_DEBUG_BUS_DEVICE_2 = IOMUX_PAD(0x05E8, 0x02A0, 9, 0x0000, 0, 0), + + MX6_PAD_USB_H_DATA__USB_H_DATA = IOMUX_PAD(0x05EC, 0x02A4, 0, 0x0000, 0, 0), + MX6_PAD_USB_H_DATA__PWM2_OUT = IOMUX_PAD(0x05EC, 0x02A4, 1, 0x0000, 0, 0), + MX6_PAD_USB_H_DATA__ANATOP_24M_OUT = IOMUX_PAD(0x05EC, 0x02A4, 2, 0x0000, 0, 0), + MX6_PAD_USB_H_DATA__I2C4_SDA = IOMUX_PAD(0x05EC, 0x02A4, 3, 0x07C4, 1, 0), + MX6_PAD_USB_H_DATA__WDOG3_WDOG_B = IOMUX_PAD(0x05EC, 0x02A4, 4, 0x0000, 0, 0), + MX6_PAD_USB_H_DATA__GPIO7_IO_10 = IOMUX_PAD(0x05EC, 0x02A4, 5, 0x0000, 0, 0), + + MX6_PAD_USB_H_STROBE__USB_H_STROBE = IOMUX_PAD(0x05F0, 0x02A8, 0, 0x0000, 0, 0), + MX6_PAD_USB_H_STROBE__PWM1_OUT = IOMUX_PAD(0x05F0, 0x02A8, 1, 0x0000, 0, 0), + MX6_PAD_USB_H_STROBE__ANATOP_32K_OUT = IOMUX_PAD(0x05F0, 0x02A8, 2, 0x0000, 0, 0), + MX6_PAD_USB_H_STROBE__I2C4_SCL = IOMUX_PAD(0x05F0, 0x02A8, 3, 0x07C0, 1, 0), + MX6_PAD_USB_H_STROBE__WDOG3_WDOG_RST_B_DEB = IOMUX_PAD(0x05F0, 0x02A8, 4, 0x0000, 0, 0), + MX6_PAD_USB_H_STROBE__GPIO7_IO_11 = IOMUX_PAD(0x05F0, 0x02A8, 5, 0x0000, 0, 0), +}; +#endif /* __ASM_ARCH_MX6_ MX6_PINS_H__ */ From d95b6ab87c609065e937810f04a84a16992b6f75 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 24 Jun 2014 17:41:00 -0300 Subject: [PATCH 03/47] mx6: clock: Do not enable sata and ipu clocks mx6sx does not have sata nor ipu blocks, so do not handle such clocks. Signed-off-by: Fabio Estevam --- arch/arm/cpu/armv7/mx6/clock.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c index f8da94be1c..e1fb5abdea 100644 --- a/arch/arm/cpu/armv7/mx6/clock.c +++ b/arch/arm/cpu/armv7/mx6/clock.c @@ -437,6 +437,7 @@ static int enable_enet_pll(uint32_t en) return 0; } +#ifndef CONFIG_MX6SX static void ungate_sata_clock(void) { struct mxc_ccm_reg *const imx_ccm = @@ -445,6 +446,7 @@ static void ungate_sata_clock(void) /* Enable SATA clock. */ setbits_le32(&imx_ccm->CCGR5, MXC_CCM_CCGR5_SATA_MASK); } +#endif static void ungate_pcie_clock(void) { @@ -455,11 +457,13 @@ static void ungate_pcie_clock(void) setbits_le32(&imx_ccm->CCGR4, MXC_CCM_CCGR4_PCIE_MASK); } +#ifndef CONFIG_MX6SX int enable_sata_clock(void) { ungate_sata_clock(); return enable_enet_pll(BM_ANADIG_PLL_ENET_ENABLE_SATA); } +#endif int enable_pcie_clock(void) { @@ -491,7 +495,9 @@ int enable_pcie_clock(void) clrbits_le32(&ccm_regs->cbcmr, MXC_CCM_CBCMR_PCIE_AXI_CLK_SEL); /* Party time! Ungate the clock to the PCIe. */ +#ifndef CONFIG_MX6SX ungate_sata_clock(); +#endif ungate_pcie_clock(); return enable_enet_pll(BM_ANADIG_PLL_ENET_ENABLE_SATA | @@ -573,6 +579,7 @@ int do_mx6_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; } +#ifndef CONFIG_MX6SX void enable_ipu_clock(void) { struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; @@ -581,6 +588,7 @@ void enable_ipu_clock(void) reg |= MXC_CCM_CCGR3_IPU1_IPU_MASK; writel(reg, &mxc_ccm->CCGR3); } +#endif /***************************************************/ U_BOOT_CMD( From 14a1613140519a8d0a88e6054c302a8cb3e067a5 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 24 Jun 2014 17:41:01 -0300 Subject: [PATCH 04/47] mx6sx: Add initial support for mx6sxsabresd board Signed-off-by: Fabio Estevam --- board/freescale/mx6sxsabresd/Makefile | 6 + board/freescale/mx6sxsabresd/imximage.cfg | 105 +++++++++++ board/freescale/mx6sxsabresd/mx6sxsabresd.c | 95 ++++++++++ boards.cfg | 1 + include/configs/mx6sxsabresd.h | 186 ++++++++++++++++++++ 5 files changed, 393 insertions(+) create mode 100644 board/freescale/mx6sxsabresd/Makefile create mode 100644 board/freescale/mx6sxsabresd/imximage.cfg create mode 100644 board/freescale/mx6sxsabresd/mx6sxsabresd.c create mode 100644 include/configs/mx6sxsabresd.h diff --git a/board/freescale/mx6sxsabresd/Makefile b/board/freescale/mx6sxsabresd/Makefile new file mode 100644 index 0000000000..97dbfda517 --- /dev/null +++ b/board/freescale/mx6sxsabresd/Makefile @@ -0,0 +1,6 @@ +# (C) Copyright 2014 Freescale Semiconductor, Inc. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := mx6sxsabresd.o diff --git a/board/freescale/mx6sxsabresd/imximage.cfg b/board/freescale/mx6sxsabresd/imximage.cfg new file mode 100644 index 0000000000..406dece0ba --- /dev/null +++ b/board/freescale/mx6sxsabresd/imximage.cfg @@ -0,0 +1,105 @@ +/* + * Copyright (C) 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#define __ASSEMBLY__ +#include + +/* image version */ + +IMAGE_VERSION 2 + +/* + * Boot Device : one of + * spi/sd/nand/onenand, qspi/nor + */ + +BOOT_FROM sd + +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ + +DATA 4 0x020c4068 0xffffffff +DATA 4 0x020c406c 0xffffffff +DATA 4 0x020c4070 0xffffffff +DATA 4 0x020c4074 0xffffffff +DATA 4 0x020c4078 0xffffffff +DATA 4 0x020c407c 0xffffffff +DATA 4 0x020c4080 0xffffffff +DATA 4 0x020c4084 0xffffffff + +DATA 4 0x020e0618 0x000c0000 +DATA 4 0x020e05fc 0x00000000 +DATA 4 0x020e032c 0x00000030 + +DATA 4 0x020e0300 0x00000030 +DATA 4 0x020e02fc 0x00000030 +DATA 4 0x020e05f4 0x00000030 +DATA 4 0x020e0340 0x00000030 + +DATA 4 0x020e0320 0x00000000 +DATA 4 0x020e0310 0x00000030 +DATA 4 0x020e0314 0x00000030 +DATA 4 0x020e0614 0x00000030 + +DATA 4 0x020e05f8 0x00020000 +DATA 4 0x020e0330 0x00000030 +DATA 4 0x020e0334 0x00000030 +DATA 4 0x020e0338 0x00000030 +DATA 4 0x020e033c 0x00000030 +DATA 4 0x020e0608 0x00020000 +DATA 4 0x020e060c 0x00000030 +DATA 4 0x020e0610 0x00000030 +DATA 4 0x020e061c 0x00000030 +DATA 4 0x020e0620 0x00000030 +DATA 4 0x020e02ec 0x00000030 +DATA 4 0x020e02f0 0x00000030 +DATA 4 0x020e02f4 0x00000030 +DATA 4 0x020e02f8 0x00000030 +DATA 4 0x021b0800 0xa1390003 +DATA 4 0x021b080c 0x00270025 +DATA 4 0x021b0810 0x001B001E +DATA 4 0x021b083c 0x4144013C +DATA 4 0x021b0840 0x01300128 +DATA 4 0x021b0848 0x4044464A +DATA 4 0x021b0850 0x3A383C34 +DATA 4 0x021b081c 0x33333333 +DATA 4 0x021b0820 0x33333333 +DATA 4 0x021b0824 0x33333333 +DATA 4 0x021b0828 0x33333333 +DATA 4 0x021b08b8 0x00000800 +DATA 4 0x021b0004 0x0002002d +DATA 4 0x021b0008 0x00333030 +DATA 4 0x021b000c 0x676b52f3 +DATA 4 0x021b0010 0xb66d8b63 +DATA 4 0x021b0014 0x01ff00db +DATA 4 0x021b0018 0x00011740 +DATA 4 0x021b001c 0x00008000 +DATA 4 0x021b002c 0x000026d2 +DATA 4 0x021b0030 0x006b1023 +DATA 4 0x021b0040 0x0000005f +DATA 4 0x021b0000 0x84190000 +DATA 4 0x021b001c 0x04008032 +DATA 4 0x021b001c 0x00008033 +DATA 4 0x021b001c 0x00068031 +DATA 4 0x021b001c 0x05208030 +DATA 4 0x021b001c 0x04008040 +DATA 4 0x021b0020 0x00000800 +DATA 4 0x021b0818 0x00011117 +DATA 4 0x021b001c 0x00000000 + +DATA 4 0x021b083c 0x41400138 +DATA 4 0x021b0840 0x012C011C +DATA 4 0x021b0848 0x3C3C4044 +DATA 4 0x021b0850 0x34343638 diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c new file mode 100644 index 0000000000..ff4c88ffa4 --- /dev/null +++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c @@ -0,0 +1,95 @@ +/* + * Copyright (C) 2014 Freescale Semiconductor, Inc. + * + * Author: Fabio Estevam + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \ + PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +int dram_init(void) +{ + gd->ram_size = PHYS_SDRAM_SIZE; + + return 0; +} + +static iomux_v3_cfg_t const uart1_pads[] = { + MX6_PAD_GPIO1_IO04__UART1_TX | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_GPIO1_IO05__UART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +static iomux_v3_cfg_t const usdhc4_pads[] = { + MX6_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DATA0__USDHC4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DATA1__USDHC4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DATA2__USDHC4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DATA3__USDHC4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DATA7__GPIO6_IO_21 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +static void setup_iomux_uart(void) +{ + imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); +} + +int board_early_init_f(void) +{ + setup_iomux_uart(); + return 0; +} + +static struct fsl_esdhc_cfg usdhc_cfg[1] = { + {USDHC4_BASE_ADDR}, +}; + +int board_mmc_getcd(struct mmc *mmc) +{ + return 1; /* Assume boot SD always present */ +} + +int board_mmc_init(bd_t *bis) +{ + imx_iomux_v3_setup_multiple_pads(usdhc4_pads, ARRAY_SIZE(usdhc4_pads)); + + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK); + return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); +} + +int board_init(void) +{ + /* Address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + return 0; +} + +int checkboard(void) +{ + puts("Board: MX6SX SABRE SDB\n"); + + return 0; +} diff --git a/boards.cfg b/boards.cfg index dbee7f6b9a..89dfcb1106 100644 --- a/boards.cfg +++ b/boards.cfg @@ -329,6 +329,7 @@ Active arm armv7 mx6 freescale mx6qsabreauto Active arm armv7 mx6 freescale mx6sabresd mx6dlsabresd mx6sabresd:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL Fabio Estevam Active arm armv7 mx6 freescale mx6sabresd mx6qsabresd mx6sabresd:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg,MX6Q Fabio Estevam Active arm armv7 mx6 freescale mx6slevk mx6slevk mx6slevk:IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL Fabio Estevam +Active arm armv7 mx6 freescale mx6sxsabresd mx6sxsabresd mx6sxsabresd:IMX_CONFIG=board/freescale/mx6sxsabresd/imximage.cfg,MX6SX Fabio Estevam Active arm armv7 mx6 gateworks gw_ventana gwventana gw_ventana:IMX_CONFIG=board/gateworks/gw_ventana/gw_ventana.cfg,MX6QDL,SPL Tim Harvey Active arm armv7 mx6 solidrun hummingboard hummingboard_solo hummingboard:IMX_CONFIG=board/solidrun/hummingboard/solo.cfg,MX6S,DDR_MB=512 Jon Nettleton Active arm armv7 omap3 - overo omap3_overo - Steve Sakoman diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h new file mode 100644 index 0000000000..390286b645 --- /dev/null +++ b/include/configs/mx6sxsabresd.h @@ -0,0 +1,186 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * Configuration settings for the Freescale i.MX6SX Sabresd board. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include +#include +#include "mx6_common.h" + +#define CONFIG_MX6 +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG +#define CONFIG_SYS_GENERIC_BOARD + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (3 * SZ_1M) + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_MXC_GPIO + +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART1_BASE + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 + +/* Command definition */ +#include + +#undef CONFIG_CMD_IMLS + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_LOADADDR 0x80800000 +#define CONFIG_SYS_TEXT_BASE 0x87800000 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "script=boot.scr\0" \ + "image=zImage\0" \ + "console=ttymxc0\0" \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" \ + "fdt_file=imx6sx-sdb.dtb\0" \ + "fdt_addr=0x88000000\0" \ + "boot_fdt=try\0" \ + "ip_dyn=yes\0" \ + "mmcdev=0\0" \ + "mmcpart=1\0" \ + "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ + "mmcargs=setenv bootargs console=${console},${baudrate} " \ + "root=${mmcroot}\0" \ + "loadbootscript=" \ + "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source\0" \ + "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if run loadfdt; then " \ + "bootz ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootz; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootz; " \ + "fi;\0" \ + "netargs=setenv bootargs console=${console},${baudrate} " \ + "root=/dev/nfs " \ + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ + "netboot=echo Booting from net ...; " \ + "run netargs; " \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "${get_cmd} ${image}; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ + "bootz ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootz; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootz; " \ + "fi;\0" + +#define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev};" \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loadimage; then " \ + "run mmcboot; " \ + "else run netboot; " \ + "fi; " \ + "fi; " \ + "else run netboot; fi" + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 1024 + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 256 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000) + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define CONFIG_CMDLINE_EDITING +#define CONFIG_STACKSIZE SZ_128K + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR +#define PHYS_SDRAM_SIZE SZ_1G + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* MMC Configuration */ +#define CONFIG_FSL_ESDHC +#define CONFIG_FSL_USDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 + +#define CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_BOUNCE_BUFFER +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION + +/* FLASH and environment organization */ +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_ENV_OFFSET (6 * SZ_64K) +#define CONFIG_ENV_SIZE SZ_8K +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 + +#define CONFIG_OF_LIBFDT +#define CONFIG_CMD_BOOTZ + +#ifndef CONFIG_SYS_DCACHE_OFF +#define CONFIG_CMD_CACHE +#endif + +#endif /* __CONFIG_H */ From 6ed9c7bbba03c7bd66ec9846b1fcce13fd90a4d2 Mon Sep 17 00:00:00 2001 From: Iain Paton Date: Mon, 9 Jun 2014 23:09:00 +0100 Subject: [PATCH 05/47] embestmx6boards: convert to generic board Enable CONFIG_SYS_GENERIC_BOARD to remove warning on boot. Signed-off-by: Iain Paton --- include/configs/embestmx6boards.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h index f1000f37fa..a7fd43bc7b 100644 --- a/include/configs/embestmx6boards.h +++ b/include/configs/embestmx6boards.h @@ -19,6 +19,8 @@ #include "mx6_common.h" #include +#define CONFIG_SYS_GENERIC_BOARD + #define CONFIG_MXC_UART_BASE UART2_BASE #define CONFIG_CONSOLE_DEV "ttymxc1" #define CONFIG_MMCROOT "/dev/mmcblk1p2" From a3df99b50f759794df9ee13f3a371954eb6b761b Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 9 Jul 2014 16:13:29 -0300 Subject: [PATCH 06/47] mx6: soc: Do not apply the PFD erratum for mx6solox The PFD issue is not present on mx6solox, so skip it in this case. Signed-off-by: Fabio Estevam --- arch/arm/cpu/armv7/mx6/soc.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index 2012caf2e7..f2dee76941 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -337,6 +337,10 @@ void s_init(void) u32 mask480; u32 mask528; + + if (is_cpu_type(MXC_CPU_MX6SX)) + return; + /* Due to hardware limitation, on MX6Q we need to gate/ungate all PFDs * to make sure PFD is working right, otherwise, PFDs may * not output clock after reset, MX6DL and MX6SL have added 396M pfd From fa8cf3176cc3360d308db1aad8bd70458553c78a Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 9 Jul 2014 16:13:30 -0300 Subject: [PATCH 07/47] mx6sxsabresd: Add PFUZE100 PMIC support Signed-off-by: Fabio Estevam --- board/freescale/mx6sxsabresd/mx6sxsabresd.c | 84 +++++++++++++++++++++ include/configs/mx6sxsabresd.h | 13 ++++ 2 files changed, 97 insertions(+) diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c index ff4c88ffa4..24d6a5196e 100644 --- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c +++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c @@ -14,10 +14,14 @@ #include #include #include +#include #include #include #include #include +#include +#include +#include DECLARE_GLOBAL_DATA_PTR; @@ -29,6 +33,11 @@ DECLARE_GLOBAL_DATA_PTR; PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \ PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) +#define I2C_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ + PAD_CTL_ODE) + int dram_init(void) { gd->ram_size = PHYS_SDRAM_SIZE; @@ -56,9 +65,77 @@ static void setup_iomux_uart(void) imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); } +#define PC MUX_PAD_CTRL(I2C_PAD_CTRL) +/* I2C1 for PMIC */ +struct i2c_pads_info i2c_pad_info1 = { + .scl = { + .i2c_mode = MX6_PAD_GPIO1_IO00__I2C1_SCL | PC, + .gpio_mode = MX6_PAD_GPIO1_IO00__GPIO1_IO_0 | PC, + .gp = IMX_GPIO_NR(1, 0), + }, + .sda = { + .i2c_mode = MX6_PAD_GPIO1_IO01__I2C1_SDA | PC, + .gpio_mode = MX6_PAD_GPIO1_IO01__GPIO1_IO_1 | PC, + .gp = IMX_GPIO_NR(1, 1), + }, +}; + +static int pfuze_init(void) +{ + struct pmic *p; + int ret; + unsigned int reg; + + ret = power_pfuze100_init(I2C_PMIC); + if (ret) + return ret; + + p = pmic_get("PFUZE100_PMIC"); + ret = pmic_probe(p); + if (ret) + return ret; + + pmic_reg_read(p, PFUZE100_DEVICEID, ®); + printf("PMIC: PFUZE100 ID=0x%02x\n", reg); + + /* Set SW1AB standby voltage to 0.975V */ + pmic_reg_read(p, PFUZE100_SW1ABSTBY, ®); + reg &= ~0x3f; + reg |= 0x1b; + pmic_reg_write(p, PFUZE100_SW1ABSTBY, reg); + + /* Set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */ + pmic_reg_read(p, PUZE_100_SW1ABCONF, ®); + reg &= ~0xc0; + reg |= 0x40; + pmic_reg_write(p, PUZE_100_SW1ABCONF, reg); + + /* Set SW1C standby voltage to 0.975V */ + pmic_reg_read(p, PFUZE100_SW1CSTBY, ®); + reg &= ~0x3f; + reg |= 0x1b; + pmic_reg_write(p, PFUZE100_SW1CSTBY, reg); + + /* Set SW1C/VDDSOC step ramp up time from 16us to 4us/25mV */ + pmic_reg_read(p, PFUZE100_SW1CCONF, ®); + reg &= ~0xc0; + reg |= 0x40; + pmic_reg_write(p, PFUZE100_SW1CCONF, reg); + + /* Enable power of VGEN5 3V3, needed for SD3 */ + pmic_reg_read(p, PFUZE100_VGEN5VOL, ®); + reg &= ~0x1F; + reg |= 0x1F; + pmic_reg_write(p, PFUZE100_VGEN5VOL, reg); + + return 0; +} + int board_early_init_f(void) { setup_iomux_uart(); + setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); + return 0; } @@ -87,6 +164,13 @@ int board_init(void) return 0; } +int board_late_init(void) +{ + pfuze_init(); + + return 0; +} + int checkboard(void) { puts("Board: MX6SX SABRE SDB\n"); diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h index 390286b645..7967b5d4c9 100644 --- a/include/configs/mx6sxsabresd.h +++ b/include/configs/mx6sxsabresd.h @@ -28,6 +28,7 @@ #define CONFIG_SYS_MALLOC_LEN (3 * SZ_1M) #define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_LATE_INIT #define CONFIG_MXC_GPIO #define CONFIG_MXC_UART @@ -168,6 +169,18 @@ #define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION +/* I2C Configs */ +#define CONFIG_CMD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_SPEED 100000 + +/* PMIC */ +#define CONFIG_POWER +#define CONFIG_POWER_I2C +#define CONFIG_POWER_PFUZE100 +#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 + /* FLASH and environment organization */ #define CONFIG_SYS_NO_FLASH From 0a11d6f29ce48c649e4358a24b5781d3171c5406 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 9 Jul 2014 17:59:54 -0300 Subject: [PATCH 08/47] mx6: Remove duplication of iomuxc structure There is no need to keep iomuxc_base_regs structure as it serves the exact same purpose of the iomuxc structure, which is to provide access to the GPR registers. The additional fields of iomuxc_base_regs are not used. Other advantage of 'iomuxc' is that it has a shorter name and the variable declarations can fit into a single line. So remove iomuxc_base_regs structure and use iomuxc instead. Signed-off-by: Fabio Estevam Acked-by: Stefano Babic --- arch/arm/imx-common/sata.c | 3 +-- arch/arm/include/asm/arch-mx6/imx-regs.h | 9 --------- board/boundary/nitrogen6x/nitrogen6x.c | 3 +-- board/freescale/mx6slevk/mx6slevk.c | 3 +-- board/gateworks/gw_ventana/gw_ventana.c | 3 +-- board/solidrun/hummingboard/hummingboard.c | 3 +-- 6 files changed, 5 insertions(+), 19 deletions(-) diff --git a/arch/arm/imx-common/sata.c b/arch/arm/imx-common/sata.c index c10dd28f61..d174a463f8 100644 --- a/arch/arm/imx-common/sata.c +++ b/arch/arm/imx-common/sata.c @@ -12,8 +12,7 @@ int setup_sata(void) { - struct iomuxc_base_regs *const iomuxc_regs - = (struct iomuxc_base_regs *)IOMUXC_BASE_ADDR; + struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; int ret; if (!is_cpu_type(MXC_CPU_MX6Q) && !is_cpu_type(MXC_CPU_MX6D)) diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h index df87123ad3..782d9c41fc 100644 --- a/arch/arm/include/asm/arch-mx6/imx-regs.h +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h @@ -764,15 +764,6 @@ struct anatop_regs { #define ANATOP_PFD_CLKGATE_SHIFT(n) (7+((n)*8)) #define ANATOP_PFD_CLKGATE_MASK(n) (1<gpr[1], IOMUXC_GPR1_OTG_ID_MASK, diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c index d2b64cc357..a990b4cea8 100644 --- a/board/freescale/mx6slevk/mx6slevk.c +++ b/board/freescale/mx6slevk/mx6slevk.c @@ -130,8 +130,7 @@ int board_eth_init(bd_t *bis) static int setup_fec(void) { - struct iomuxc_base_regs *iomuxc_regs = - (struct iomuxc_base_regs *)IOMUXC_BASE_ADDR; + struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; int ret; /* clear gpr1[14], gpr1[18:17] to select anatop clock */ diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index 9d2651f0cb..9967f80d5e 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -1122,8 +1122,7 @@ int dram_init(void) int board_init(void) { - struct iomuxc_base_regs *const iomuxc_regs - = (struct iomuxc_base_regs *)IOMUXC_BASE_ADDR; + struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_OTG_ID_MASK, diff --git a/board/solidrun/hummingboard/hummingboard.c b/board/solidrun/hummingboard/hummingboard.c index 2e2fb2a5b7..6d204b343e 100644 --- a/board/solidrun/hummingboard/hummingboard.c +++ b/board/solidrun/hummingboard/hummingboard.c @@ -144,8 +144,7 @@ int board_phy_config(struct phy_device *phydev) int board_eth_init(bd_t *bis) { - struct iomuxc_base_regs *const iomuxc_regs = - (struct iomuxc_base_regs *)IOMUXC_BASE_ADDR; + struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; int ret = enable_fec_anatop_clock(ENET_25MHz); if (ret) From aeadf0655c5adaec718f37a05b05ea59f7492614 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 9 Jul 2014 17:59:55 -0300 Subject: [PATCH 09/47] mx6: Adjust the GPR offset for mx6solox On mx6solox there is an additional 0x4000 offset for the GPR registers. Signed-off-by: Fabio Estevam Acked-by: Stefano Babic --- arch/arm/include/asm/arch-mx6/imx-regs.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h index 782d9c41fc..cc746b8396 100644 --- a/arch/arm/include/asm/arch-mx6/imx-regs.h +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h @@ -398,6 +398,9 @@ struct src { struct iomuxc { +#ifdef CONFIG_MX6SX + u8 reserved[0x4000]; +#endif u32 gpr[14]; u32 omux[5]; /* mux and pad registers */ From d726d5f92636e66ca753ede1185afae52172d806 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 12 Jul 2014 15:39:14 +0200 Subject: [PATCH 10/47] arm: mxs: Scrub useless ifdef As a result of 0defddc851edfc34bcf3c3379fe74b11dc01a493 , which did a consolidation of the prompt string, this ifdef became empty. Remove it. Signed-off-by: Marek Vasut Cc: Tom Rini Cc: Stefano Babic --- include/configs/mxs.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/include/configs/mxs.h b/include/configs/mxs.h index 8bce28fe20..df9eb93432 100644 --- a/include/configs/mxs.h +++ b/include/configs/mxs.h @@ -94,8 +94,6 @@ /* U-Boot general configuration */ #define CONFIG_SYS_LONGHELP -#ifndef CONFIG_SYS_PROMPT -#endif #define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */ #define CONFIG_SYS_PBSIZE \ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) From 4a4d3a7db71a632c1ad65ef6d5f3661edd8a68d9 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Fri, 18 Jul 2014 06:07:17 +0200 Subject: [PATCH 11/47] imx6: add gpr2 usb_otg_id iomux select control define add IOMUXC_GPR1_USB_OTG_ID_OFFSET and IOMUXC_GPR1_USB_OTG_ID_SEL_MASK define for the USB_OTG_ID_SEL bit. Signed-off-by: Heiko Schocher Acked-by: Stefano Babic --- arch/arm/include/asm/arch-mx6/imx-regs.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h index cc746b8396..59b17dbc2c 100644 --- a/arch/arm/include/asm/arch-mx6/imx-regs.h +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h @@ -348,6 +348,8 @@ struct src { /* GPR1 bitfields */ #define IOMUXC_GPR1_ENET_CLK_SEL_OFFSET 21 #define IOMUXC_GPR1_ENET_CLK_SEL_MASK (1 << IOMUXC_GPR1_ENET_CLK_SEL_OFFSET) +#define IOMUXC_GPR1_USB_OTG_ID_OFFSET 13 +#define IOMUXC_GPR1_USB_OTG_ID_SEL_MASK (1 << IOMUXC_GPR1_USB_OTG_ID_OFFSET) /* GPR3 bitfields */ #define IOMUXC_GPR3_GPU_DBG_OFFSET 29 From aafe4020c1d0c0f989b68f839d66ffc66df6ab9e Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Fri, 18 Jul 2014 06:07:18 +0200 Subject: [PATCH 12/47] i.MX6: define struct pwm_regs and PWMCR_* defines add defines for pwm modul found on imx6. Signed-off-by: Heiko Schocher Cc: Stefano Babic --- arch/arm/include/asm/arch-mx6/imx-regs.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h index 59b17dbc2c..6c0a0d98dd 100644 --- a/arch/arm/include/asm/arch-mx6/imx-regs.h +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h @@ -777,5 +777,21 @@ struct wdog_regs { u16 wmcr; /* Miscellaneous Control */ }; +#define PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4) +#define PWMCR_DOZEEN (1 << 24) +#define PWMCR_WAITEN (1 << 23) +#define PWMCR_DBGEN (1 << 22) +#define PWMCR_CLKSRC_IPG_HIGH (2 << 16) +#define PWMCR_CLKSRC_IPG (1 << 16) +#define PWMCR_EN (1 << 0) + +struct pwm_regs { + u32 cr; + u32 sr; + u32 ir; + u32 sar; + u32 pr; + u32 cnr; +}; #endif /* __ASSEMBLER__*/ #endif /* __ASM_ARCH_MX6_IMX_REGS_H__ */ From b2f97cf279c54c51741539455116ec3393a871ea Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Fri, 18 Jul 2014 06:07:19 +0200 Subject: [PATCH 13/47] pwm, imx6: add support for pwm modul on imx6 add basic support for the pwm modul found on imx6. Pieces of this code are based on linux code from drivers/pwm/pwm-imx.c Commit "cd3de83f1476 Linux 3.16-rc4" Signed-off-by: Heiko Schocher Acked-by: Stefano Babic Cc: Wolfgang Denk --- README | 4 +++ drivers/Makefile | 1 + drivers/pwm/Makefile | 13 +++++++ drivers/pwm/pwm-imx-util.c | 73 ++++++++++++++++++++++++++++++++++++++ drivers/pwm/pwm-imx-util.h | 16 +++++++++ drivers/pwm/pwm-imx.c | 59 ++++++++++++++++++++++++++++++ 6 files changed, 166 insertions(+) create mode 100644 drivers/pwm/Makefile create mode 100644 drivers/pwm/pwm-imx-util.c create mode 100644 drivers/pwm/pwm-imx-util.h create mode 100644 drivers/pwm/pwm-imx.c diff --git a/README b/README index 4ac7399698..a35b92c889 100644 --- a/README +++ b/README @@ -1377,6 +1377,10 @@ The following options need to be configured: CONFIG_SH_ETHER_CACHE_WRITEBACK If this option is set, the driver enables cache flush. +- PWM Support: + CONFIG_PWM_IMX + Support for PWM modul on the imx6. + - TPM Support: CONFIG_TPM Support TPM devices. diff --git a/drivers/Makefile b/drivers/Makefile index b23076f614..b22b109404 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -15,3 +15,4 @@ obj-y += video/ obj-y += watchdog/ obj-$(CONFIG_QE) += qe/ obj-y += memory/ +obj-y += pwm/ diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile new file mode 100644 index 0000000000..c0c4883317 --- /dev/null +++ b/drivers/pwm/Makefile @@ -0,0 +1,13 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2001 +# Erik Theisen, Wave 7 Optics, etheisen@mindspring.com. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +#ccflags-y += -DDEBUG + +obj-$(CONFIG_PWM_IMX) += pwm-imx.o pwm-imx-util.o diff --git a/drivers/pwm/pwm-imx-util.c b/drivers/pwm/pwm-imx-util.c new file mode 100644 index 0000000000..f1d0b35d27 --- /dev/null +++ b/drivers/pwm/pwm-imx-util.c @@ -0,0 +1,73 @@ +/* + * (C) Copyright 2014 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Basic support for the pwm modul on imx6. + * + * Based on linux:drivers/pwm/pwm-imx.c + * from + * Sascha Hauer + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include +#include +#include + +/* pwm_id from 0..3 */ +struct pwm_regs *pwm_id_to_reg(int pwm_id) +{ + switch (pwm_id) { + case 0: + return (struct pwm_regs *)PWM1_BASE_ADDR; + break; + case 1: + return (struct pwm_regs *)PWM2_BASE_ADDR; + break; + case 2: + return (struct pwm_regs *)PWM3_BASE_ADDR; + break; + case 3: + return (struct pwm_regs *)PWM4_BASE_ADDR; + break; + default: + printf("unknown pwm_id: %d\n", pwm_id); + break; + } + return NULL; +} + +int pwm_imx_get_parms(int period_ns, int duty_ns, unsigned long *period_c, + unsigned long *duty_c, unsigned long *prescale) +{ + unsigned long long c; + + /* + * we have not yet a clock framework for imx6, so add the clock + * value here as a define. Replace it when we have the clock + * framework. + */ + c = CONFIG_IMX6_PWM_PER_CLK; + c = c * period_ns; + do_div(c, 1000000000); + *period_c = c; + + *prescale = *period_c / 0x10000 + 1; + + *period_c /= *prescale; + c = (unsigned long long)(*period_c * duty_ns); + do_div(c, period_ns); + *duty_c = c; + + /* + * according to imx pwm RM, the real period value should be + * PERIOD value in PWMPR plus 2. + */ + if (*period_c > 2) + *period_c -= 2; + else + *period_c = 0; + + return 0; +} diff --git a/drivers/pwm/pwm-imx-util.h b/drivers/pwm/pwm-imx-util.h new file mode 100644 index 0000000000..45465c4fde --- /dev/null +++ b/drivers/pwm/pwm-imx-util.h @@ -0,0 +1,16 @@ +/* + * (C) Copyright 2014 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Basic support for the pwm modul on imx6. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _pwm_imx_util_h_ +#define _pwm_imx_util_h_ + +struct pwm_regs *pwm_id_to_reg(int pwm_id); +int pwm_imx_get_parms(int period_ns, int duty_ns, unsigned long *period_c, + unsigned long *duty_c, unsigned long *prescale); +#endif diff --git a/drivers/pwm/pwm-imx.c b/drivers/pwm/pwm-imx.c new file mode 100644 index 0000000000..40bf027543 --- /dev/null +++ b/drivers/pwm/pwm-imx.c @@ -0,0 +1,59 @@ +/* + * (C) Copyright 2014 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Basic support for the pwm modul on imx6. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include "pwm-imx-util.h" + +int pwm_init(int pwm_id, int div, int invert) +{ + struct pwm_regs *pwm = (struct pwm_regs *)pwm_id_to_reg(pwm_id); + + writel(0, &pwm->ir); + return 0; +} + +int pwm_config(int pwm_id, int duty_ns, int period_ns) +{ + struct pwm_regs *pwm = (struct pwm_regs *)pwm_id_to_reg(pwm_id); + unsigned long period_cycles, duty_cycles, prescale; + u32 cr; + + pwm_imx_get_parms(period_ns, duty_ns, &period_cycles, &duty_cycles, + &prescale); + + cr = PWMCR_PRESCALER(prescale) | + PWMCR_DOZEEN | PWMCR_WAITEN | + PWMCR_DBGEN | PWMCR_CLKSRC_IPG_HIGH; + + writel(cr, &pwm->cr); + /* set duty cycles */ + writel(duty_cycles, &pwm->sar); + /* set period cycles */ + writel(period_cycles, &pwm->pr); + return 0; +} + +int pwm_enable(int pwm_id) +{ + struct pwm_regs *pwm = (struct pwm_regs *)pwm_id_to_reg(pwm_id); + + setbits_le32(&pwm->cr, PWMCR_EN); + return 0; +} + +void pwm_disable(int pwm_id) +{ + struct pwm_regs *pwm = (struct pwm_regs *)pwm_id_to_reg(pwm_id); + + clrbits_le32(&pwm->cr, PWMCR_EN); +} From a0ae0091d783b1140f8d321d8c6d221aeb0d39d0 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Fri, 18 Jul 2014 06:07:20 +0200 Subject: [PATCH 14/47] i.MX6: add enable_spi_clk() add enable_spi_clk(), so board code can enable spi clocks. Signed-off-by: Heiko Schocher Reviewed-by: Jagannadha Sutradharudu Teki Cc: Eric Nelson Cc: Stefano Babic --- arch/arm/cpu/armv7/mx6/clock.c | 18 ++++++++++++++++++ arch/arm/include/asm/arch-mx6/clock.h | 1 + arch/arm/include/asm/arch-mx6/imx-regs.h | 1 + 3 files changed, 20 insertions(+) diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c index e1fb5abdea..abd9d619dc 100644 --- a/arch/arm/cpu/armv7/mx6/clock.c +++ b/arch/arm/cpu/armv7/mx6/clock.c @@ -71,6 +71,24 @@ int enable_i2c_clk(unsigned char enable, unsigned i2c_num) } #endif +/* spi_num can be from 0 - SPI_MAX_NUM */ +int enable_spi_clk(unsigned char enable, unsigned spi_num) +{ + u32 reg; + u32 mask; + + if (spi_num > SPI_MAX_NUM) + return -EINVAL; + + mask = MXC_CCM_CCGR_CG_MASK << (spi_num << 1); + reg = __raw_readl(&imx_ccm->CCGR1); + if (enable) + reg |= mask; + else + reg &= ~mask; + __raw_writel(reg, &imx_ccm->CCGR1); + return 0; +} static u32 decode_pll(enum pll_clocks pll, u32 infreq) { u32 div; diff --git a/arch/arm/include/asm/arch-mx6/clock.h b/arch/arm/include/asm/arch-mx6/clock.h index 1b4ded7feb..339c789110 100644 --- a/arch/arm/include/asm/arch-mx6/clock.h +++ b/arch/arm/include/asm/arch-mx6/clock.h @@ -57,6 +57,7 @@ void enable_usboh3_clk(unsigned char enable); int enable_sata_clock(void); int enable_pcie_clock(void); int enable_i2c_clk(unsigned char enable, unsigned i2c_num); +int enable_spi_clk(unsigned char enable, unsigned spi_num); void enable_ipu_clock(void); int enable_fec_anatop_clock(enum enet_freq freq); #endif /* __ASM_ARCH_CLOCK_H */ diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h index 6c0a0d98dd..437b434b1a 100644 --- a/arch/arm/include/asm/arch-mx6/imx-regs.h +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h @@ -505,6 +505,7 @@ struct cspi_regs { #define MXC_CSPICTRL_RXOVF (1 << 6) #define MXC_CSPIPERIOD_32KHZ (1 << 15) #define MAX_SPI_BYTES 32 +#define SPI_MAX_NUM 4 /* Bit position inside CTRL register to be associated with SS */ #define MXC_CSPICTRL_CHAN 18 From 562f8df18da62ae02c4ace1e530451fe82c3312d Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Fri, 18 Jul 2014 06:07:21 +0200 Subject: [PATCH 15/47] spi: add config option to enable the WP pin function on st micron flashes enable the W#/Vpp signal to disable writing to the status register on ST MICRON flashes like the N25Q128 thorugh the new config option CONFIG_SYS_SPI_ST_ENABLE_WP_PIN Signed-off-by: Heiko Schocher Cc: Jagannadha Sutradharudu Teki --- README | 11 +++++++++++ drivers/mtd/spi/sf_internal.h | 4 ++++ drivers/mtd/spi/sf_probe.c | 30 ++++++++++++++++++++++++++++++ 3 files changed, 45 insertions(+) diff --git a/README b/README index a35b92c889..37e4d1b09d 100644 --- a/README +++ b/README @@ -2930,6 +2930,17 @@ CBFS (Coreboot Filesystem) support memories can be connected with a given cs line. currently Xilinx Zynq qspi support these type of connections. + CONFIG_SYS_SPI_ST_ENABLE_WP_PIN + enable the W#/Vpp signal to disable writing to the status + register on ST MICRON flashes like the N25Q128. + The status register write enable/disable bit, combined with + the W#/VPP signal provides hardware data protection for the + device as follows: When the enable/disable bit is set to 1, + and the W#/VPP signal is driven LOW, the status register + nonvolatile bits become read-only and the WRITE STATUS REGISTER + operation will not execute. The only way to exit this + hardware-protected mode is to drive W#/VPP HIGH. + - SystemACE Support: CONFIG_SYSTEMACE diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h index 6bcd522040..19d49146eb 100644 --- a/drivers/mtd/spi/sf_internal.h +++ b/drivers/mtd/spi/sf_internal.h @@ -60,6 +60,10 @@ #define STATUS_QEB_MXIC (1 << 6) #define STATUS_PEC (1 << 7) +#ifdef CONFIG_SYS_SPI_ST_ENABLE_WP_PIN +#define STATUS_SRWD (1 << 7) /* SR write protect */ +#endif + /* Flash timeout values */ #define SPI_FLASH_PROG_TIMEOUT (2 * CONFIG_SYS_HZ) #define SPI_FLASH_PAGE_ERASE_TIMEOUT (5 * CONFIG_SYS_HZ) diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c index 36ae5e0a77..4d148d1ace 100644 --- a/drivers/mtd/spi/sf_probe.c +++ b/drivers/mtd/spi/sf_probe.c @@ -281,6 +281,34 @@ int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash) } #endif /* CONFIG_OF_CONTROL */ +#ifdef CONFIG_SYS_SPI_ST_ENABLE_WP_PIN +/* enable the W#/Vpp signal to disable writing to the status register */ +static int spi_enable_wp_pin(struct spi_flash *flash) +{ + u8 status; + int ret; + + ret = spi_flash_cmd_read_status(flash, &status); + if (ret < 0) + return ret; + + ret = spi_flash_cmd_write_status(flash, STATUS_SRWD); + if (ret < 0) + return ret; + + ret = spi_flash_cmd_write_disable(flash); + if (ret < 0) + return ret; + + return 0; +} +#else +static int spi_enable_wp_pin(struct spi_flash *flash) +{ + return 0; +} +#endif + static struct spi_flash *spi_flash_probe_slave(struct spi_slave *spi) { struct spi_flash *flash = NULL; @@ -351,6 +379,8 @@ static struct spi_flash *spi_flash_probe_slave(struct spi_slave *spi) puts(" Full access #define CONFIG_SPI_FLASH_BAR\n"); } #endif + if (spi_enable_wp_pin(flash)) + puts("Enable WP pin failed\n"); /* Release spi bus */ spi_release_bus(spi); From e379c03902e55aed2533f569727e006d3ec4b9c3 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Fri, 18 Jul 2014 06:07:22 +0200 Subject: [PATCH 16/47] arm, imx6: add aristainetos board CPU: Freescale i.MX6DL rev1.1 at 792 MHz Board: aristaitenos I2C: ready DRAM: 1 GiB NAND: 512 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 SF: Detected N25Q128 with page size 256 Bytes, erase size 64 KiB, total 16 MiB Display: lb07wv8 (800x480) - UART5 is console - MMC 0 and 1 - USB 0 and 1 - boot from mmc0 and spi nor flash - Splash screen support Signed-off-by: Heiko Schocher Cc: Stefano Babic --- board/aristainetos/Makefile | 9 + board/aristainetos/aristainetos.c | 519 ++++++++++++++++++++++++++++ board/aristainetos/aristainetos.cfg | 33 ++ board/aristainetos/clocks.cfg | 24 ++ board/aristainetos/ddr-setup.cfg | 61 ++++ board/aristainetos/mt41j128M.cfg | 70 ++++ boards.cfg | 1 + include/configs/aristainetos.h | 325 +++++++++++++++++ 8 files changed, 1042 insertions(+) create mode 100644 board/aristainetos/Makefile create mode 100644 board/aristainetos/aristainetos.c create mode 100644 board/aristainetos/aristainetos.cfg create mode 100644 board/aristainetos/clocks.cfg create mode 100644 board/aristainetos/ddr-setup.cfg create mode 100644 board/aristainetos/mt41j128M.cfg create mode 100644 include/configs/aristainetos.h diff --git a/board/aristainetos/Makefile b/board/aristainetos/Makefile new file mode 100644 index 0000000000..5de48bc439 --- /dev/null +++ b/board/aristainetos/Makefile @@ -0,0 +1,9 @@ +# +# Copyright (C) 2007, Guennadi Liakhovetski +# +# (C) Copyright 2011 Freescale Semiconductor, Inc. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := aristainetos.o diff --git a/board/aristainetos/aristainetos.c b/board/aristainetos/aristainetos.c new file mode 100644 index 0000000000..3bfcf5b0da --- /dev/null +++ b/board/aristainetos/aristainetos.c @@ -0,0 +1,519 @@ +/* + * (C) Copyright 2014 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * Copyright (C) 2012 Freescale Semiconductor, Inc. + * + * Author: Fabio Estevam + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ + PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ + PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \ + PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \ + PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ + PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS) + +#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST) + +#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ + PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ + PAD_CTL_ODE | PAD_CTL_SRE_FAST) + +#define PC MUX_PAD_CTRL(I2C_PAD_CTRL) + +#define DISP_PAD_CTRL (0x10) + +#define ECSPI4_CS1 IMX_GPIO_NR(5, 2) + +struct i2c_pads_info i2c_pad_info1 = { + .scl = { + .i2c_mode = MX6_PAD_CSI0_DAT9__I2C1_SCL | PC, + .gpio_mode = MX6_PAD_CSI0_DAT9__GPIO5_IO27 | PC, + .gp = IMX_GPIO_NR(5, 27) + }, + .sda = { + .i2c_mode = MX6_PAD_CSI0_DAT8__I2C1_SDA | PC, + .gpio_mode = MX6_PAD_CSI0_DAT8__GPIO5_IO26 | PC, + .gp = IMX_GPIO_NR(5, 26) + } +}; + +struct i2c_pads_info i2c_pad_info2 = { + .scl = { + .i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | PC, + .gpio_mode = MX6_PAD_KEY_COL3__GPIO4_IO12 | PC, + .gp = IMX_GPIO_NR(4, 12) + }, + .sda = { + .i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | PC, + .gpio_mode = MX6_PAD_KEY_ROW3__GPIO4_IO13 | PC, + .gp = IMX_GPIO_NR(4, 13) + } +}; + +struct i2c_pads_info i2c_pad_info3 = { + .scl = { + .i2c_mode = MX6_PAD_EIM_D17__I2C3_SCL | PC, + .gpio_mode = MX6_PAD_EIM_D17__GPIO3_IO17 | PC, + .gp = IMX_GPIO_NR(3, 17) + }, + .sda = { + .i2c_mode = MX6_PAD_EIM_D18__I2C3_SDA | PC, + .gpio_mode = MX6_PAD_EIM_D18__GPIO3_IO18 | PC, + .gp = IMX_GPIO_NR(3, 18) + } +}; + +int dram_init(void) +{ + gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); + + return 0; +} + +iomux_v3_cfg_t const uart1_pads[] = { + MX6_PAD_CSI0_DAT10__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_CSI0_DAT11__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +iomux_v3_cfg_t const uart5_pads[] = { + MX6_PAD_CSI0_DAT14__UART5_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_CSI0_DAT15__UART5_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +iomux_v3_cfg_t const gpio_pads[] = { + /* LED enable */ + MX6_PAD_SD4_DAT5__GPIO2_IO13 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* spi flash WP protect */ + MX6_PAD_SD4_DAT7__GPIO2_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* backlight enable */ + MX6_PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* LED yellow */ + MX6_PAD_GPIO_3__GPIO1_IO03 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* LED red */ + MX6_PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* LED green */ + MX6_PAD_GPIO_5__GPIO1_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* LED blue */ + MX6_PAD_GPIO_6__GPIO1_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* i2c4 scl */ + MX6_PAD_GPIO_7__GPIO1_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* i2c4 sda */ + MX6_PAD_GPIO_8__GPIO1_IO08 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* spi CS 1 */ + MX6_PAD_EIM_A25__GPIO5_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +static iomux_v3_cfg_t const misc_pads[] = { + MX6_PAD_GPIO_1__USB_OTG_ID | MUX_PAD_CTRL(NO_PAD_CTRL), + /* OTG Power enable */ + MX6_PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +iomux_v3_cfg_t const enet_pads[] = { + MX6_PAD_GPIO_16__ENET_REF_CLK | MUX_PAD_CTRL(0x4001b0a8), + MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_TXD0__ENET_TX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_TXD1__ENET_TX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_TX_EN__ENET_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_RX_ER__ENET_RX_ER | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_RXD0__ENET_RX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_RXD1__ENET_RX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_CRS_DV__ENET_RX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL), +}; + +static void setup_iomux_enet(void) +{ + struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; + + imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads)); + + /* set GPIO_16 as ENET_REF_CLK_OUT */ + setbits_le32(&iomux->gpr[1], IOMUXC_GPR1_ENET_CLK_SEL_MASK); +} + +iomux_v3_cfg_t const usdhc1_pads[] = { + MX6_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD1_DAT0__SD1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD1_DAT1__SD1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD1_DAT2__SD1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD1_DAT3__SD1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), +}; + +iomux_v3_cfg_t const usdhc2_pads[] = { + MX6_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), +}; + +iomux_v3_cfg_t const ecspi4_pads[] = { + MX6_PAD_EIM_D21__ECSPI4_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_EIM_D22__ECSPI4_MISO | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_EIM_D28__ECSPI4_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_EIM_D20__GPIO3_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +static iomux_v3_cfg_t const display_pads[] = { + MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK | MUX_PAD_CTRL(DISP_PAD_CTRL), + MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15, + MX6_PAD_DI0_PIN2__IPU1_DI0_PIN02, + MX6_PAD_DI0_PIN3__IPU1_DI0_PIN03, + MX6_PAD_DI0_PIN4__GPIO4_IO20, + MX6_PAD_DISP0_DAT0__IPU1_DISP0_DATA00, + MX6_PAD_DISP0_DAT1__IPU1_DISP0_DATA01, + MX6_PAD_DISP0_DAT2__IPU1_DISP0_DATA02, + MX6_PAD_DISP0_DAT3__IPU1_DISP0_DATA03, + MX6_PAD_DISP0_DAT4__IPU1_DISP0_DATA04, + MX6_PAD_DISP0_DAT5__IPU1_DISP0_DATA05, + MX6_PAD_DISP0_DAT6__IPU1_DISP0_DATA06, + MX6_PAD_DISP0_DAT7__IPU1_DISP0_DATA07, + MX6_PAD_DISP0_DAT8__IPU1_DISP0_DATA08, + MX6_PAD_DISP0_DAT9__IPU1_DISP0_DATA09, + MX6_PAD_DISP0_DAT10__IPU1_DISP0_DATA10, + MX6_PAD_DISP0_DAT11__IPU1_DISP0_DATA11, + MX6_PAD_DISP0_DAT12__IPU1_DISP0_DATA12, + MX6_PAD_DISP0_DAT13__IPU1_DISP0_DATA13, + MX6_PAD_DISP0_DAT14__IPU1_DISP0_DATA14, + MX6_PAD_DISP0_DAT15__IPU1_DISP0_DATA15, + MX6_PAD_DISP0_DAT16__IPU1_DISP0_DATA16, + MX6_PAD_DISP0_DAT17__IPU1_DISP0_DATA17, + MX6_PAD_DISP0_DAT18__IPU1_DISP0_DATA18, + MX6_PAD_DISP0_DAT19__IPU1_DISP0_DATA19, + MX6_PAD_DISP0_DAT20__IPU1_DISP0_DATA20, + MX6_PAD_DISP0_DAT21__IPU1_DISP0_DATA21, + MX6_PAD_DISP0_DAT22__IPU1_DISP0_DATA22, + MX6_PAD_DISP0_DAT23__IPU1_DISP0_DATA23, +}; + +static iomux_v3_cfg_t const backlight_pads[] = { + MX6_PAD_GPIO_9__PWM1_OUT | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_SD4_DAT1__PWM3_OUT | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +static void setup_spi(void) +{ + int i; + + imx_iomux_v3_setup_multiple_pads(ecspi4_pads, ARRAY_SIZE(ecspi4_pads)); + for (i = 0; i < 3; i++) + enable_spi_clk(true, i); + + /* set cs1 to high */ + gpio_direction_output(ECSPI4_CS1, 1); +} + +static void setup_iomux_gpio(void) +{ + imx_iomux_v3_setup_multiple_pads(gpio_pads, ARRAY_SIZE(gpio_pads)); +} + +static void setup_iomux_uart(void) +{ + imx_iomux_v3_setup_multiple_pads(uart5_pads, ARRAY_SIZE(uart5_pads)); +} + +#ifdef CONFIG_FSL_ESDHC +struct fsl_esdhc_cfg usdhc_cfg[2] = { + {USDHC1_BASE_ADDR}, + {USDHC2_BASE_ADDR}, +}; + +int board_mmc_getcd(struct mmc *mmc) +{ + return 1; +} + +int board_mmc_init(bd_t *bis) +{ + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); + usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); + + imx_iomux_v3_setup_multiple_pads(usdhc1_pads, ARRAY_SIZE(usdhc1_pads)); + imx_iomux_v3_setup_multiple_pads(usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); + + return fsl_esdhc_initialize(bis, &usdhc_cfg[0]) | + fsl_esdhc_initialize(bis, &usdhc_cfg[1]); +} +#endif + +/* + * Do not overwrite the console + * Use always serial for U-Boot console + */ +int overwrite_console(void) +{ + return 1; +} + +int board_eth_init(bd_t *bis) +{ + struct iomuxc *iomuxc_regs = + (struct iomuxc *)IOMUXC_BASE_ADDR; + int ret; + + setup_iomux_enet(); + /* clear gpr1[14], gpr1[18:17] to select anatop clock */ + clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC_MASK, 0); + + ret = enable_fec_anatop_clock(ENET_50MHz); + if (ret) + return ret; + + return cpu_eth_init(bis); +} +#if defined(CONFIG_VIDEO_IPUV3) + +static void enable_lvds(struct display_info_t const *dev) +{ + imx_iomux_v3_setup_multiple_pads( + display_pads, + ARRAY_SIZE(display_pads)); + imx_iomux_v3_setup_multiple_pads( + backlight_pads, + ARRAY_SIZE(backlight_pads)); + + /* enable backlight PWM 3 */ + if (pwm_init(2, 0, 0)) + goto error; + /* duty cycle 200ns, period: 3000ns */ + if (pwm_config(2, 200, 3000)) + goto error; + if (pwm_enable(2)) + goto error; + return; + +error: + puts("error init pwm for backlight\n"); + return; +} + +struct display_info_t const displays[] = { + { + .bus = -1, + .addr = 0, + .pixfmt = IPU_PIX_FMT_RGB24, + .detect = NULL, + .enable = enable_lvds, + .mode = { + .name = "lb07wv8", + .refresh = 60, + .xres = 800, + .yres = 480, + .pixclock = 33246, + .left_margin = 88, + .right_margin = 88, + .upper_margin = 10, + .lower_margin = 10, + .hsync_len = 25, + .vsync_len = 1, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED + } + } +}; +size_t display_count = ARRAY_SIZE(displays); + +static void setup_display(void) +{ + struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; + int reg; + + enable_ipu_clock(); + + reg = readl(&mxc_ccm->cs2cdr); + /* select pll 5 clock */ + reg &= MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK; + reg &= MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK; + writel(reg, &mxc_ccm->cs2cdr); + + imx_iomux_v3_setup_multiple_pads(backlight_pads, + ARRAY_SIZE(backlight_pads)); +} + +/* no console on this board */ +int board_cfb_skip(void) +{ + return 1; +} +#endif + +int board_early_init_f(void) +{ + setup_iomux_uart(); + setup_iomux_gpio(); + +#if defined(CONFIG_VIDEO_IPUV3) + setup_display(); +#endif + return 0; +} + +iomux_v3_cfg_t nfc_pads[] = { + MX6_PAD_NANDF_CLE__NAND_CLE | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_NANDF_ALE__NAND_ALE | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_NANDF_WP_B__NAND_WP_B | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_NANDF_RB0__NAND_READY_B | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_NANDF_CS0__NAND_CE0_B | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_NANDF_CS1__NAND_CE1_B | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_NANDF_CS2__NAND_CE2_B | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_NANDF_CS3__NAND_CE3_B | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_SD4_CMD__NAND_RE_B | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_SD4_CLK__NAND_WE_B | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_NANDF_D0__NAND_DATA00 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_NANDF_D1__NAND_DATA01 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_NANDF_D2__NAND_DATA02 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_NANDF_D3__NAND_DATA03 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_NANDF_D4__NAND_DATA04 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_NANDF_D5__NAND_DATA05 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_NANDF_D6__NAND_DATA06 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_NANDF_D7__NAND_DATA07 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_SD4_DAT0__NAND_DQS | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +static void setup_gpmi_nand(void) +{ + struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; + + /* config gpmi nand iomux */ + imx_iomux_v3_setup_multiple_pads(nfc_pads, + ARRAY_SIZE(nfc_pads)); + + /* config gpmi and bch clock to 100 MHz */ + clrsetbits_le32(&mxc_ccm->cs2cdr, + MXC_CCM_CS2CDR_ENFC_CLK_PODF_MASK | + MXC_CCM_CS2CDR_ENFC_CLK_PRED_MASK | + MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK, + MXC_CCM_CS2CDR_ENFC_CLK_PODF(0) | + MXC_CCM_CS2CDR_ENFC_CLK_PRED(3) | + MXC_CCM_CS2CDR_ENFC_CLK_SEL(3)); + + /* enable gpmi and bch clock gating */ + setbits_le32(&mxc_ccm->CCGR4, + MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK | + MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK | + MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK | + MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK | + MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_OFFSET); + + /* enable apbh clock gating */ + setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK); +} + +int board_init(void) +{ + struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; + + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + setup_spi(); + + setup_i2c(0, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE, + &i2c_pad_info1); + setup_i2c(1, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE, + &i2c_pad_info2); + setup_i2c(2, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE, + &i2c_pad_info3); + + /* i2c4 not used, set it to gpio input */ + gpio_request(IMX_GPIO_NR(1, 7), "i2c4_scl"); + gpio_direction_input(IMX_GPIO_NR(1, 7)); + gpio_request(IMX_GPIO_NR(1, 8), "i2c4_sda"); + gpio_direction_input(IMX_GPIO_NR(1, 8)); + + /* SPI NOR Flash read only */ + gpio_request(CONFIG_GPIO_ENABLE_SPI_FLASH, "ena_spi_nor"); + gpio_direction_output(CONFIG_GPIO_ENABLE_SPI_FLASH, 0); + gpio_free(CONFIG_GPIO_ENABLE_SPI_FLASH); + + /* enable LED */ + gpio_request(IMX_GPIO_NR(2, 13), "LED ena"); + gpio_direction_output(IMX_GPIO_NR(2, 13), 0); + + gpio_request(IMX_GPIO_NR(1, 3), "LED yellow"); + gpio_direction_output(IMX_GPIO_NR(1, 3), 1); + gpio_request(IMX_GPIO_NR(1, 4), "LED red"); + gpio_direction_output(IMX_GPIO_NR(1, 4), 1); + gpio_request(IMX_GPIO_NR(1, 5), "LED green"); + gpio_direction_output(IMX_GPIO_NR(1, 5), 1); + gpio_request(IMX_GPIO_NR(1, 6), "LED blue"); + gpio_direction_output(IMX_GPIO_NR(1, 6), 1); + + setup_gpmi_nand(); + + /* GPIO_1 for USB_OTG_ID */ + setbits_le32(&iomux->gpr[1], IOMUXC_GPR1_USB_OTG_ID_SEL_MASK); + imx_iomux_v3_setup_multiple_pads(misc_pads, ARRAY_SIZE(misc_pads)); + + return 0; +} + +int checkboard(void) +{ + puts("Board: aristaitenos\n"); + return 0; +} + +#ifdef CONFIG_USB_EHCI_MX6 +int board_ehci_hcd_init(int port) +{ + int ret; + + ret = gpio_request(ARISTAINETOS_USB_H1_PWR, "usb-h1-pwr"); + if (!ret) + gpio_direction_output(ARISTAINETOS_USB_H1_PWR, 1); + ret = gpio_request(ARISTAINETOS_USB_OTG_PWR, "usb-OTG-pwr"); + if (!ret) + gpio_direction_output(ARISTAINETOS_USB_OTG_PWR, 1); + return 0; +} + +int board_ehci_power(int port, int on) +{ + if (port) + gpio_set_value(ARISTAINETOS_USB_OTG_PWR, on); + else + gpio_set_value(ARISTAINETOS_USB_H1_PWR, on); + return 0; +} +#endif diff --git a/board/aristainetos/aristainetos.cfg b/board/aristainetos/aristainetos.cfg new file mode 100644 index 0000000000..2290180b45 --- /dev/null +++ b/board/aristainetos/aristainetos.cfg @@ -0,0 +1,33 @@ +/* + * (C) Copyright 2014 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * Copyright (C) 2013 Boundary Devices + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Refer doc/README.imximage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +/* image version */ +IMAGE_VERSION 2 + +/* + * Boot Device : one of + * spi, sd + */ +BOOT_FROM spi + +#define __ASSEMBLY__ +#include +#include "asm/arch/mx6-ddr.h" +#include "asm/arch/iomux.h" +#include "asm/arch/crm_regs.h" + +#include "ddr-setup.cfg" +#include "mt41j128M.cfg" +#include "clocks.cfg" diff --git a/board/aristainetos/clocks.cfg b/board/aristainetos/clocks.cfg new file mode 100644 index 0000000000..651449e567 --- /dev/null +++ b/board/aristainetos/clocks.cfg @@ -0,0 +1,24 @@ +/* + * Copyright (C) 2013 Boundary Devices + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ + +/* set the default clock gate to save power */ +DATA 4, CCM_CCGR0, 0x00c03f3f +DATA 4, CCM_CCGR1, 0x0030fcff +DATA 4, CCM_CCGR2, 0x0fffcfc0 +DATA 4, CCM_CCGR3, 0x3ff0300f +DATA 4, CCM_CCGR4, 0xfffff30c /* enable NAND/GPMI/BCH clocks */ +DATA 4, CCM_CCGR5, 0x0f0000c3 +DATA 4, CCM_CCGR6, 0x000003ff diff --git a/board/aristainetos/ddr-setup.cfg b/board/aristainetos/ddr-setup.cfg new file mode 100644 index 0000000000..c72a3ef821 --- /dev/null +++ b/board/aristainetos/ddr-setup.cfg @@ -0,0 +1,61 @@ +/* + * Copyright (C) 2013 Boundary Devices + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ + +/* DDR IO TYPE */ +DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000C0000 +DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000 +/* Clock */ +DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00000030 +/* Address */ +DATA 4, MX6_IOM_DRAM_CAS, 0x00000030 +DATA 4, MX6_IOM_DRAM_RAS, 0x00000030 +DATA 4, MX6_IOM_GRP_ADDDS, 0x00000030 +/* Control */ +DATA 4, MX6_IOM_DRAM_RESET, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDCKE0, 0x00003000 +DATA 4, MX6_IOM_DRAM_SDCKE1, 0x00003000 +DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000 +DATA 4, MX6_IOM_DRAM_SDODT0, 0x00003030 +DATA 4, MX6_IOM_DRAM_SDODT1, 0x00003030 +DATA 4, MX6_IOM_GRP_CTLDS, 0x00000030 +/* Data Strobe */ +DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000 +DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000030 +DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000 +DATA 4, MX6_IOM_GRP_B0DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B1DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B2DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B3DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B4DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B5DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B6DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B7DS, 0x00000030 +DATA 4, MX6_IOM_DRAM_DQM0, 0x00000030 +DATA 4, MX6_IOM_DRAM_DQM1, 0x00000030 +DATA 4, MX6_IOM_DRAM_DQM2, 0x00000030 +DATA 4, MX6_IOM_DRAM_DQM3, 0x00000030 +DATA 4, MX6_IOM_DRAM_DQM4, 0x00000030 +DATA 4, MX6_IOM_DRAM_DQM5, 0x00000030 +DATA 4, MX6_IOM_DRAM_DQM6, 0x00000030 +DATA 4, MX6_IOM_DRAM_DQM7, 0x00000030 diff --git a/board/aristainetos/mt41j128M.cfg b/board/aristainetos/mt41j128M.cfg new file mode 100644 index 0000000000..3561655727 --- /dev/null +++ b/board/aristainetos/mt41j128M.cfg @@ -0,0 +1,70 @@ +/* + * Copyright (C) 2013 Boundary Devices + * + * SPDX-License-Identifier: GPL-2.0+ + */ +/* ZQ Calibration */ +DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xa1390003 +DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xa1390003 +DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x001F001F +DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x001F001F +DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x001F001F +DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x001F001F +/* + * DQS gating, read delay, write delay calibration values + * based on calibration compare of 0x00ffff00 + */ +DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x420E020E +DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x02000200 +DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x42020202 +DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x01720172 +DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x494C4F4C +DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x4A4C4C49 +DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x3F3F3133 +DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x39373F2E +/* read data bit delay */ +DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333 +DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333 +DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333 +DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333 +DATA 4, MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333 +DATA 4, MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333 +DATA 4, MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333 +DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333 +/* Complete calibration by forced measurment */ +DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800 +DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800 +/* in DDR3, 64-bit mode, only MMDC0 is initiated */ +DATA 4, MX6_MMDC_P0_MDPDC, 0x0002002d +DATA 4, MX6_MMDC_P0_MDOTC, 0x00333030 +DATA 4, MX6_MMDC_P0_MDCFG0, 0x40445323 +DATA 4, MX6_MMDC_P0_MDCFG1, 0xb66e8c63 +DATA 4, MX6_MMDC_P0_MDCFG2, 0x01ff00db +DATA 4, MX6_MMDC_P0_MDMISC, 0x00081740 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000 +DATA 4, MX6_MMDC_P0_MDRWD, 0x000026d2 +DATA 4, MX6_MMDC_P0_MDOR, 0x00440e21 +DATA 4, MX6_MMDC_P0_MDASP, 0x00000027 +DATA 4, MX6_MMDC_P0_MDCTL, 0x84190000 +/* MR2 */ +DATA 4, MX6_MMDC_P0_MDSCR, 0x04008032 +DATA 4, MX6_MMDC_P0_MDSCR, 0x0400803a +/* MR3 */ +DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033 +DATA 4, MX6_MMDC_P0_MDSCR, 0x0000803b +/* MR1 */ +DATA 4, MX6_MMDC_P0_MDSCR, 0x00428031 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00428039 +/* MR0 */ +DATA 4, MX6_MMDC_P0_MDSCR, 0x07208030 +DATA 4, MX6_MMDC_P0_MDSCR, 0x07208038 +/* ZQ calibration */ +DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040 +DATA 4, MX6_MMDC_P0_MDSCR, 0x04008048 +/* final ddr setup */ +DATA 4, MX6_MMDC_P0_MDREF, 0x00005800 +DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00000007 +DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00000007 +DATA 4, MX6_MMDC_P0_MDPDC, 0x0002556d +DATA 4, MX6_MMDC_P1_MAPSR, 0x00011006 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 diff --git a/boards.cfg b/boards.cfg index 65bbec5abd..e3ecea3b67 100644 --- a/boards.cfg +++ b/boards.cfg @@ -311,6 +311,7 @@ Active arm armv7 mx5 freescale mx53smd Active arm armv7 mx5 genesi mx51_efikamx mx51_efikamx mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_mx.cfg - Active arm armv7 mx5 genesi mx51_efikamx mx51_efikasb mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKASB,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_sb.cfg - Active arm armv7 mx5 ttcontrol vision2 vision2 vision2:IMX_CONFIG=board/ttcontrol/vision2/imximage_hynix.cfg Stefano Babic +Active arm armv7 mx6 - aristainetos aristainetos aristainetos:IMX_CONFIG=board/aristainetos/aristainetos.cfg,MX6DL Heiko Schocher Active arm armv7 mx6 - udoo udoo_quad udoo:IMX_CONFIG=board/udoo/udoo.cfg,MX6Q,DDR_MB=1024 Fabio Estevam Active arm armv7 mx6 - wandboard wandboard_dl wandboard:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL,DDR_MB=1024 Fabio Estevam Active arm armv7 mx6 - wandboard wandboard_quad wandboard:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q2g.cfg,MX6Q,DDR_MB=2048 Fabio Estevam diff --git a/include/configs/aristainetos.h b/include/configs/aristainetos.h new file mode 100644 index 0000000000..20aea8572d --- /dev/null +++ b/include/configs/aristainetos.h @@ -0,0 +1,325 @@ +/* + * (C) Copyright 2014 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * Copyright (C) 2012 Freescale Semiconductor, Inc. + * + * Configuration settings for the Freescale i.MX6Q SabreSD board. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef __ARISTAINETOS_CONFIG_H +#define __ARISTAINETOS_CONFIG_H + +#define CONFIG_MX6 + +#include "mx6_common.h" +#include + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#include +#include + +#define CONFIG_MACH_TYPE 4501 +#define CONFIG_MMCROOT "/dev/mmcblk0p2" +#define CONFIG_DEFAULT_FDT_FILE "aristainetos.dtb" +#define CONFIG_HOSTNAME aristainetos +#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) + +#define CONFIG_SYS_GENERIC_BOARD + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (64 * SZ_1M) + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_MXC_GPIO + +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART5_BASE +#define CONFIG_CONSOLE_DEV "ttymxc4" + +#define CONFIG_CMD_FUSE +#define CONFIG_MXC_OCOTP + +/* MMC Configs */ +#define CONFIG_FSL_ESDHC +#define CONFIG_FSL_USDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 + +#define CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_BOUNCE_BUFFER +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION + +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_FEC_MXC +#define CONFIG_MII +#define IMX_FEC_BASE ENET_BASE_ADDR +#define CONFIG_FEC_XCV_TYPE RMII +#define CONFIG_ETHPRIME "FEC" +#define CONFIG_FEC_MXC_PHYADDR 0 + +#define CONFIG_PHYLIB +#define CONFIG_PHY_MICREL + +#define CONFIG_CMD_SF +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_MTD +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_MXC_SPI +#define CONFIG_SF_DEFAULT_BUS 3 +#define CONFIG_SF_DEFAULT_CS (0|(IMX_GPIO_NR(3, 20)<<8)) +#define CONFIG_SF_DEFAULT_SPEED 20000000 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 +#define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 + +/* Command definition */ +#include + +#define CONFIG_CMD_BMODE +#define CONFIG_CMD_BOOTZ +#define CONFIG_CMD_SETEXPR +#undef CONFIG_CMD_IMLS + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_LOADADDR 0x12000000 +#define CONFIG_SYS_TEXT_BASE 0x17800000 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "uimage=uImage\0" \ + "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ + "fdt_addr_r=0x11000000\0" \ + "kernel_addr_r=0x12000000\0" \ + "kernel_file=uImage\0" \ + "boot_fdt=try\0" \ + "ip_dyn=yes\0" \ + "console=" CONFIG_CONSOLE_DEV "\0" \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" \ + "mmcpart=1\0" \ + "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ + "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ + "mmcargs=setenv bootargs console=${console},${baudrate} " \ + "root=${mmcroot}\0" \ + "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${kernel_addr_r} " \ + "${uimage}\0" \ + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} " \ + "${fdt_file}\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs;run loadimage loadfdt fdt_setup;" \ + "bootm ${kernel_addr_r} - ${fdt_addr_r};\0" \ + "rootpath=/opt/eldk-5.5/armv7a-hf/rootfs-sato-sdk\0" \ + "nfsopts=nfsvers=3 nolock rw\0" \ + "netdev=eth0\0" \ + "fdt_setup=fdt addr ${fdt_addr_r};fdt resize;fdt chosen;fdt board\0"\ + "load_fdt=tftp ${fdt_addr_r} ${fdt_file}\0" \ + "load_kernel=tftp ${kernel_addr_r} ${kernel_file}\0" \ + "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "get_env=mw ${loadaddr} 0x00000000 0x20000;" \ + "tftp ${loadaddr} /tftpboot/aristainetos/env.txt;" \ + "env import -t ${loadaddr}\0" \ + "addmisc=setenv bootargs ${bootargs} maxcpus=1 loglevel=8\0" \ + "bootargs_defaults=setenv bootargs ${console} ${mtdoops} " \ + "${optargs}\0" \ + "net_args=run bootargs_defaults;setenv bootargs ${bootargs} " \ + "root=/dev/nfs nfsroot=${serverip}:${rootpath},${nfsopts} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \ + "${hostname}:${netdev}:off\0" \ + "net_nfs=run load_kernel load_fdt;run net_args addmtd addmisc;" \ + "run fdt_setup;bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ + "uboot=/tftpboot/aristainetos/u-boot.imx\0" \ + "load_uboot=tftp ${loadaddr} ${uboot}\0" \ + "uboot_sz=c0000\0" \ + "upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \ + "mw.b 10200000 0x00 ${uboot_sz};" \ + "run load_uboot;sf probe;sf erase 0 ${uboot_sz};" \ + "sf write ${loadaddr} 400 ${filesize};" \ + "sf read 10200000 400 ${uboot_sz};" \ + "cmp.b ${loadaddr} 10200000 bc000\0" \ + "ubi_prep=ubi part ubi 2048;ubifsmount ubi:kernel\0" \ + "load_kernel_ubi=ubifsload ${kernel_addr_r} uImage\0" \ + "load_fdt_ubi=ubifsload ${fdt_addr_r} aristainetos.dtb\0" \ + "ubi_nfs=run ubiprep load_kernel_ubi load_fdt_ubi;" \ + "run net_args addmtd addmisc;run fdt_setup;" \ + "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ + "rootfsname=rootfs\0" \ + "ubi_args=run bootargs_defaults;setenv bootargs ${bootargs} " \ + "ubi.mtd=0,2048 root=ubi0:${rootfsname} rootfstype=ubifs " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \ + "${hostname}:${netdev}:off\0" \ + "ubi_ubi=run ubi_prep load_kernel_ubi load_fdt_ubi;" \ + "run bootargs_defaults ubi_args addmtd addmisc;" \ + "run fdt_setup;bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ + "ubirootfs_file=/tftpboot/aristainetos/rootfs-minimal.ubifs\0" \ + "upd_ubirootfs=run ubi_prep;tftp ${loadaddr} ${ubirootfs_file};" \ + "ubi write ${loadaddr} rootfs ${filesize}\0" \ + "ksz=800000\0" \ + "rootsz=2000000\0" \ + "usersz=8000000\0" \ + "ubi_make=run ubi_prep;ubi create kernel ${ksz};" \ + "ubi create rootfs ${rootsz};ubi create userfs ${usersz}\0" + +#define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev};" \ + "if mmc rescan; then " \ + "run mmcboot;" \ + "else run ubi_ubi; fi" + +#define CONFIG_ARP_TIMEOUT 200UL + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 256 + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000) +#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define CONFIG_CMDLINE_EDITING +#define CONFIG_STACKSIZE (128 * 1024) + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* FLASH and environment organization */ +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_ENV_SIZE (12 * 1024) +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_SYS_REDUNDAND_ENVIRONMENT +#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS +#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS +#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED +#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE +#define CONFIG_ENV_SECT_SIZE (0x010000) +#define CONFIG_ENV_OFFSET (0x0c0000) +#define CONFIG_ENV_OFFSET_REDUND (0x0d0000) + +#define CONFIG_OF_LIBFDT + +#define CONFIG_CMD_CACHE + +#define CONFIG_SYS_FSL_USDHC_NUM 2 + +#define CONFIG_CMD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 0x7f +#define CONFIG_SYS_I2C_NOPROBES { {0, 0x00} } + +#define CONFIG_CMD_GPIO +#define CONFIG_GPIO_ENABLE_SPI_FLASH IMX_GPIO_NR(2, 15) + +/* NAND stuff */ +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NAND_TRIMFFS +#define CONFIG_NAND_MXS +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_ONFI_DETECTION + +/* DMA stuff, needed for GPMI/MXS NAND support */ +#define CONFIG_APBH_DMA +#define CONFIG_APBH_DMA_BURST +#define CONFIG_APBH_DMA_BURST8 + +/* RTC */ +#define CONFIG_SYS_I2C_RTC_ADDR 0x68 +#define CONFIG_SYS_RTC_BUS_NUM 2 +#define CONFIG_RTC_M41T11 +#define CONFIG_CMD_DATE + +/* USB Configs */ +#define CONFIG_CMD_USB +#define CONFIG_CMD_FAT +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MX6 +#define CONFIG_USB_STORAGE +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 + +#define ARISTAINETOS_USB_OTG_PWR IMX_GPIO_NR(4, 15) +#define ARISTAINETOS_USB_H1_PWR IMX_GPIO_NR(3, 31) + +/* UBI support */ +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_PARTITIONS +#define CONFIG_MTD_DEVICE +#define CONFIG_RBTREE +#define CONFIG_LZO +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS + +#define MTDIDS_DEFAULT "nand0=gpmi-nand" +#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:-(ubi)" + +#define CONFIG_MTD_UBI_FASTMAP +#define CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT 1 + +#define CONFIG_HW_WATCHDOG +#define CONFIG_IMX_WATCHDOG + +#define CONFIG_FIT + +/* Framebuffer */ +#define CONFIG_VIDEO +#define CONFIG_VIDEO_IPUV3 +/* check this console not needed, after test remove it */ +#define CONFIG_CFB_CONSOLE +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE +#define CONFIG_VIDEO_BMP_RLE8 +#define CONFIG_SPLASH_SCREEN +#define CONFIG_SPLASH_SCREEN_ALIGN +#define CONFIG_BMP_16BPP +#define CONFIG_VIDEO_LOGO +#define CONFIG_VIDEO_BMP_LOGO +#define CONFIG_IPUV3_CLK 198000000 +#define CONFIG_IMX_VIDEO_SKIP + +#define CONFIG_CMD_BMP + +#define CONFIG_PWM_IMX +#define CONFIG_IMX6_PWM_PER_CLK 66000000 + +#endif /* __ARISTAINETOS_CONFIG_H */ From cb07d74e2e0c0a41533b6bcd551af9bf2ebcf2bc Mon Sep 17 00:00:00 2001 From: Markus Niebel Date: Fri, 18 Jul 2014 16:52:44 +0200 Subject: [PATCH 17/47] Add TQ Systems TQMa6 board support This patch adds the changes to boards.cfg and the board directory under board/tqc. TQMa6 is a family of modules based on Freescale i.MX6. It consists of TQMa6Q (i.MX6 Quad), TQMa6D (i.MX6 Dual) featuring eMMC, and 1 GiB DDR3 TQMa6S (i.MX6 Solo) featuring eMMC and 512 MiB DDR3 The modules need a baseboard. Initially the MBa6x starterkit mainboard is supported. To easy support for other mainboards the functionality is splitted in one file for the module (tqma6.c) and one file for the baseboard (tqma6_ mba6). The modules can be boot from eMMC (on USDHC3) and SPI flash. The following features are supported: - MMC: eMMC on module (on USDHC3) and SD-card (on MBa6x mainboard) - Ethernet: RGMII using micrel KSZ9031 phy on MBa6x mainboard for TQMa6 module. The phy needs special configurations for the pad skew registers to adjust for the signal routing. Also support for standard ethernet commands and uppdate via tftp. - SPI: ECSPI1 with bootable serial flash on module and two additional chip selects on MBa6x - I2C: This patch adds support for the I2C busses on the TQMa6 modules (I2C3) and MBa6x baseboards (I2C1). The LM75 temperature sensors on TQMa6 and MBa6x are also configured. - USB: high speed host 1 on MBa6x and support for USB storage - PMIC: support for pfuze 100 on TQMa6 Signed-off-by: Markus Niebel --- board/tqc/tqma6/Makefile | 9 + board/tqc/tqma6/README | 35 +++ board/tqc/tqma6/clocks.cfg | 24 ++ board/tqc/tqma6/tqma6.c | 262 +++++++++++++++++++ board/tqc/tqma6/tqma6_bb.h | 30 +++ board/tqc/tqma6/tqma6_mba6.c | 361 ++++++++++++++++++++++++++ board/tqc/tqma6/tqma6q.cfg | 125 +++++++++ board/tqc/tqma6/tqma6s.cfg | 125 +++++++++ boards.cfg | 4 + include/configs/tqma6.h | 483 +++++++++++++++++++++++++++++++++++ 10 files changed, 1458 insertions(+) create mode 100644 board/tqc/tqma6/Makefile create mode 100644 board/tqc/tqma6/README create mode 100644 board/tqc/tqma6/clocks.cfg create mode 100644 board/tqc/tqma6/tqma6.c create mode 100644 board/tqc/tqma6/tqma6_bb.h create mode 100644 board/tqc/tqma6/tqma6_mba6.c create mode 100644 board/tqc/tqma6/tqma6q.cfg create mode 100644 board/tqc/tqma6/tqma6s.cfg create mode 100644 include/configs/tqma6.h diff --git a/board/tqc/tqma6/Makefile b/board/tqc/tqma6/Makefile new file mode 100644 index 0000000000..9ee6920abe --- /dev/null +++ b/board/tqc/tqma6/Makefile @@ -0,0 +1,9 @@ +# +# Copyright (C) 2014, Markus Niebel +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := tqma6.o + +obj-$(CONFIG_MBA6) += tqma6_mba6.o diff --git a/board/tqc/tqma6/README b/board/tqc/tqma6/README new file mode 100644 index 0000000000..2c012e7b75 --- /dev/null +++ b/board/tqc/tqma6/README @@ -0,0 +1,35 @@ +U-Boot for the TQ Systems TQMa6 modules + +This file contains information for the port of +U-Boot to the TQ Systems TQMa6 modules. + +1. Boot source +-------------- + +The following boot source is supported: + +- SD/eMMC +- SPI NOR + +2. Building +------------ + +To build U-Boot for the TQ Systems TQMa6 modules: + + make tqma6___config + make + +x is a placeholder for the CPU variant +q - means i.MX6Q/D: TQMa6Q (i.MX6Q) and TQMa6D (i.MX6D) +s - means i.MX6S: TQMa6S (i.MX6S) + +baseboard is a placeholder for the boot device +mmc - means eMMC +spi - mean SPI NOR + +This gives the following configurations: + +tqma6q_mba6_mmc_config +tqma6q_mba6_spi_config +tqma6s_mba6_mmc_config +tqma6s_mba6_spi_config diff --git a/board/tqc/tqma6/clocks.cfg b/board/tqc/tqma6/clocks.cfg new file mode 100644 index 0000000000..d9dd273a2b --- /dev/null +++ b/board/tqc/tqma6/clocks.cfg @@ -0,0 +1,24 @@ +/* + * Copyright (C) 2013 Boundary Devices + * Copyright (C) 2013, 2014 Markus Niebel + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Refer doc/README.imximage for more details about how-to configure + * and create imximage boot image + */ + +/* set the default clock gate to save power */ +DATA 4, CCM_CCGR0, 0x00C03F3F +DATA 4, CCM_CCGR1, 0x0030FC03 +DATA 4, CCM_CCGR2, 0x0FFFC000 +DATA 4, CCM_CCGR3, 0x3FF00000 +DATA 4, CCM_CCGR4, 0x00FFF300 +DATA 4, CCM_CCGR5, 0x0F0000C3 +DATA 4, CCM_CCGR6, 0x000003FF + +/* enable AXI cache for VDOA/VPU/IPU */ +DATA 4, MX6_IOMUXC_GPR4, 0xF00000CF +/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ +DATA 4, MX6_IOMUXC_GPR6, 0x007F007F +DATA 4, MX6_IOMUXC_GPR7, 0x007F007F diff --git a/board/tqc/tqma6/tqma6.c b/board/tqc/tqma6/tqma6.c new file mode 100644 index 0000000000..69c4551eca --- /dev/null +++ b/board/tqc/tqma6/tqma6.c @@ -0,0 +1,262 @@ +/* + * Copyright (C) 2012 Freescale Semiconductor, Inc. + * Author: Fabio Estevam + * + * Copyright (C) 2013, 2014 TQ Systems (ported SabreSD to TQMa6x) + * Author: Markus Niebel + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "tqma6_bb.h" + +DECLARE_GLOBAL_DATA_PTR; + +#define USDHC_CLK_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \ + PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \ + PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +#define GPIO_OUT_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_LOW | \ + PAD_CTL_DSE_40ohm | PAD_CTL_HYS) + +#define GPIO_IN_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_LOW | \ + PAD_CTL_DSE_40ohm | PAD_CTL_HYS) + +#define SPI_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ + PAD_CTL_ODE | PAD_CTL_SRE_FAST) + +int dram_init(void) +{ + gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); + + return 0; +} + +static const uint16_t tqma6_emmc_dsr = 0x0100; + +/* eMMC on USDHCI3 always present */ +static iomux_v3_cfg_t const tqma6_usdhc3_pads[] = { + NEW_PAD_CTRL(MX6_PAD_SD3_CLK__SD3_CLK, USDHC_PAD_CTRL), + NEW_PAD_CTRL(MX6_PAD_SD3_CMD__SD3_CMD, USDHC_PAD_CTRL), + NEW_PAD_CTRL(MX6_PAD_SD3_DAT0__SD3_DATA0, USDHC_PAD_CTRL), + NEW_PAD_CTRL(MX6_PAD_SD3_DAT1__SD3_DATA1, USDHC_PAD_CTRL), + NEW_PAD_CTRL(MX6_PAD_SD3_DAT2__SD3_DATA2, USDHC_PAD_CTRL), + NEW_PAD_CTRL(MX6_PAD_SD3_DAT3__SD3_DATA3, USDHC_PAD_CTRL), + NEW_PAD_CTRL(MX6_PAD_SD3_DAT4__SD3_DATA4, USDHC_PAD_CTRL), + NEW_PAD_CTRL(MX6_PAD_SD3_DAT5__SD3_DATA5, USDHC_PAD_CTRL), + NEW_PAD_CTRL(MX6_PAD_SD3_DAT6__SD3_DATA6, USDHC_PAD_CTRL), + NEW_PAD_CTRL(MX6_PAD_SD3_DAT7__SD3_DATA7, USDHC_PAD_CTRL), + /* eMMC reset */ + NEW_PAD_CTRL(MX6_PAD_SD3_RST__SD3_RESET, GPIO_OUT_PAD_CTRL), +}; + +/* + * According to board_mmc_init() the following map is done: + * (U-boot device node) (Physical Port) + * mmc0 eMMC (SD3) on TQMa6 + * mmc1 .. n optional slots used on baseboard + */ +struct fsl_esdhc_cfg tqma6_usdhc_cfg = { + .esdhc_base = USDHC3_BASE_ADDR, + .max_bus_width = 8, +}; + +int board_mmc_getcd(struct mmc *mmc) +{ + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; + int ret = 0; + + if (cfg->esdhc_base == USDHC3_BASE_ADDR) + /* eMMC/uSDHC3 is always present */ + ret = 1; + else + ret = tqma6_bb_board_mmc_getcd(mmc); + + return ret; +} + +int board_mmc_getwp(struct mmc *mmc) +{ + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; + int ret = 0; + + if (cfg->esdhc_base == USDHC3_BASE_ADDR) + /* eMMC/uSDHC3 is always present */ + ret = 0; + else + ret = tqma6_bb_board_mmc_getwp(mmc); + + return ret; +} + +int board_mmc_init(bd_t *bis) +{ + imx_iomux_v3_setup_multiple_pads(tqma6_usdhc3_pads, + ARRAY_SIZE(tqma6_usdhc3_pads)); + tqma6_usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + if (fsl_esdhc_initialize(bis, &tqma6_usdhc_cfg)) { + puts("Warning: failed to initialize eMMC dev\n"); + } else { + struct mmc *mmc = find_mmc_device(0); + if (mmc) + mmc_set_dsr(mmc, tqma6_emmc_dsr); + } + + tqma6_bb_board_mmc_init(bis); + + return 0; +} + +static iomux_v3_cfg_t const tqma6_ecspi1_pads[] = { + /* SS1 */ + NEW_PAD_CTRL(MX6_PAD_EIM_D19__GPIO3_IO19, SPI_PAD_CTRL), + NEW_PAD_CTRL(MX6_PAD_EIM_D16__ECSPI1_SCLK, SPI_PAD_CTRL), + NEW_PAD_CTRL(MX6_PAD_EIM_D17__ECSPI1_MISO, SPI_PAD_CTRL), + NEW_PAD_CTRL(MX6_PAD_EIM_D18__ECSPI1_MOSI, SPI_PAD_CTRL), +}; + +static unsigned const tqma6_ecspi1_cs[] = { + IMX_GPIO_NR(3, 19), +}; + +static void tqma6_iomuxc_spi(void) +{ + unsigned i; + + for (i = 0; i < ARRAY_SIZE(tqma6_ecspi1_cs); ++i) + gpio_direction_output(tqma6_ecspi1_cs[i], 1); + imx_iomux_v3_setup_multiple_pads(tqma6_ecspi1_pads, + ARRAY_SIZE(tqma6_ecspi1_pads)); +} + +static struct i2c_pads_info tqma6_i2c3_pads = { + /* I2C3: on board LM75, M24C64, */ + .scl = { + .i2c_mode = NEW_PAD_CTRL(MX6_PAD_GPIO_5__I2C3_SCL, + I2C_PAD_CTRL), + .gpio_mode = NEW_PAD_CTRL(MX6_PAD_GPIO_5__GPIO1_IO05, + I2C_PAD_CTRL), + .gp = IMX_GPIO_NR(1, 5) + }, + .sda = { + .i2c_mode = NEW_PAD_CTRL(MX6_PAD_GPIO_6__I2C3_SDA, + I2C_PAD_CTRL), + .gpio_mode = NEW_PAD_CTRL(MX6_PAD_GPIO_6__GPIO1_IO06, + I2C_PAD_CTRL), + .gp = IMX_GPIO_NR(1, 6) + } +}; + +static void tqma6_setup_i2c(void) +{ + /* use logical index for bus, e.g. I2C1 -> 0 */ + setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &tqma6_i2c3_pads); +} + +int board_early_init_f(void) +{ + return tqma6_bb_board_early_init_f(); +} + +int board_init(void) +{ + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + tqma6_iomuxc_spi(); + tqma6_setup_i2c(); + + tqma6_bb_board_init(); + + return 0; +} + +static const char *tqma6_get_boardname(void) +{ + u32 cpurev = get_cpu_rev(); + + switch ((cpurev & 0xFF000) >> 12) { + case MXC_CPU_MX6SOLO: + return "TQMa6S"; + break; + case MXC_CPU_MX6DL: + return "TQMa6DL"; + break; + case MXC_CPU_MX6D: + return "TQMa6D"; + break; + case MXC_CPU_MX6Q: + return "TQMa6Q"; + break; + default: + return "??"; + }; +} + +int board_late_init(void) +{ + struct pmic *p; + u32 reg; + + setenv("board_name", tqma6_get_boardname()); + + /* + * configure PFUZE100 PMIC: + * TODO: should go to power_init_board if bus switching is + * fixed in generic power code + */ + power_pfuze100_init(TQMA6_PFUZE100_I2C_BUS); + p = pmic_get("PFUZE100_PMIC"); + if (p && !pmic_probe(p)) { + pmic_reg_read(p, PFUZE100_DEVICEID, ®); + printf("PMIC: PFUZE100_PMIC ID=0x%02x\n", reg); + } + + tqma6_bb_board_late_init(); + + return 0; +} + +int checkboard(void) +{ + printf("Board: %s on a %s\n", tqma6_get_boardname(), + tqma6_bb_get_boardname()); + return 0; +} + +/* + * Device Tree Support + */ +#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) +void ft_board_setup(void *blob, bd_t *bd) +{ + /* bring in eMMC dsr settings */ + do_fixup_by_path_u32(blob, + "/soc/aips-bus@02100000/usdhc@02198000", + "dsr", tqma6_emmc_dsr, 2); + tqma6_bb_ft_board_setup(blob, bd); +} +#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */ diff --git a/board/tqc/tqma6/tqma6_bb.h b/board/tqc/tqma6/tqma6_bb.h new file mode 100644 index 0000000000..9d072d28ad --- /dev/null +++ b/board/tqc/tqma6/tqma6_bb.h @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2013, 2014 TQ Systems + * Author: Markus Niebel + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __TQMA6_BB__ +#define __TQMA6_BB + +#include + +int tqma6_bb_board_mmc_getwp(struct mmc *mmc); +int tqma6_bb_board_mmc_getcd(struct mmc *mmc); +int tqma6_bb_board_mmc_init(bd_t *bis); + +int tqma6_bb_board_early_init_f(void); +int tqma6_bb_board_init(void); +int tqma6_bb_board_late_init(void); +int tqma6_bb_checkboard(void); + +const char *tqma6_bb_get_boardname(void); +/* + * Device Tree Support + */ +#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) +void tqma6_bb_ft_board_setup(void *blob, bd_t *bd); +#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */ + +#endif diff --git a/board/tqc/tqma6/tqma6_mba6.c b/board/tqc/tqma6/tqma6_mba6.c new file mode 100644 index 0000000000..fd592875d8 --- /dev/null +++ b/board/tqc/tqma6/tqma6_mba6.c @@ -0,0 +1,361 @@ +/* + * Copyright (C) 2012 Freescale Semiconductor, Inc. + * Author: Fabio Estevam + * + * Copyright (C) 2013, 2014 TQ Systems (ported SabreSD to TQMa6x) + * Author: Markus Niebel + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "tqma6_bb.h" + +DECLARE_GLOBAL_DATA_PTR; + +#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +#define USDHC_CLK_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \ + PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \ + PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +#define GPIO_OUT_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_LOW | \ + PAD_CTL_DSE_40ohm | PAD_CTL_HYS) + +#define GPIO_IN_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_LOW | \ + PAD_CTL_DSE_40ohm | PAD_CTL_HYS) + +#define SPI_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ + PAD_CTL_ODE | PAD_CTL_SRE_FAST) + +#if defined(CONFIG_MX6Q) + +#define IOMUX_SW_PAD_CTRL_GRP_DDR_TYPE_RGMII 0x02e0790 +#define IOMUX_SW_PAD_CTRL_GRP_RGMII_TERM 0x02e07ac + +#elif defined(CONFIG_MX6S) + +#define IOMUX_SW_PAD_CTRL_GRP_DDR_TYPE_RGMII 0x02e0768 +#define IOMUX_SW_PAD_CTRL_GRP_RGMII_TERM 0x02e0788 + +#else + +#error "need to define target CPU" + +#endif + +#define ENET_RX_PAD_CTRL (PAD_CTL_DSE_34ohm) +#define ENET_TX_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_DSE_34ohm) +#define ENET_CLK_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_HIGH | \ + PAD_CTL_DSE_34ohm) +#define ENET_MDIO_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_60ohm) + +/* disable on die termination for RGMII */ +#define IOMUX_SW_PAD_CTRL_GRP_RGMII_TERM_DISABLE 0x00000000 +/* optimised drive strength for 1.0 .. 1.3 V signal on RGMII */ +#define IOMUX_SW_PAD_CTRL_GRP_DDR_TYPE_RGMII_1P2V 0x00080000 +/* optimised drive strength for 1.3 .. 2.5 V signal on RGMII */ +#define IOMUX_SW_PAD_CTRL_GRP_DDR_TYPE_RGMII_1P5V 0x000C0000 + +#define ENET_PHY_RESET_GPIO IMX_GPIO_NR(1, 25) + +static iomux_v3_cfg_t const mba6_enet_pads[] = { + NEW_PAD_CTRL(MX6_PAD_ENET_MDIO__ENET_MDIO, ENET_MDIO_PAD_CTRL), + NEW_PAD_CTRL(MX6_PAD_ENET_MDC__ENET_MDC, ENET_MDIO_PAD_CTRL), + + NEW_PAD_CTRL(MX6_PAD_RGMII_TXC__RGMII_TXC, ENET_TX_PAD_CTRL), + NEW_PAD_CTRL(MX6_PAD_RGMII_TD0__RGMII_TD0, ENET_TX_PAD_CTRL), + NEW_PAD_CTRL(MX6_PAD_RGMII_TD1__RGMII_TD1, ENET_TX_PAD_CTRL), + NEW_PAD_CTRL(MX6_PAD_RGMII_TD2__RGMII_TD2, ENET_TX_PAD_CTRL), + NEW_PAD_CTRL(MX6_PAD_RGMII_TD3__RGMII_TD3, ENET_TX_PAD_CTRL), + NEW_PAD_CTRL(MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL, + ENET_TX_PAD_CTRL), + NEW_PAD_CTRL(MX6_PAD_ENET_REF_CLK__ENET_TX_CLK, ENET_CLK_PAD_CTRL), + /* + * these pins are also used for config strapping by phy + */ + NEW_PAD_CTRL(MX6_PAD_RGMII_RD0__RGMII_RD0, ENET_RX_PAD_CTRL), + NEW_PAD_CTRL(MX6_PAD_RGMII_RD1__RGMII_RD1, ENET_RX_PAD_CTRL), + NEW_PAD_CTRL(MX6_PAD_RGMII_RD2__RGMII_RD2, ENET_RX_PAD_CTRL), + NEW_PAD_CTRL(MX6_PAD_RGMII_RD3__RGMII_RD3, ENET_RX_PAD_CTRL), + NEW_PAD_CTRL(MX6_PAD_RGMII_RXC__RGMII_RXC, ENET_RX_PAD_CTRL), + NEW_PAD_CTRL(MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL, + ENET_RX_PAD_CTRL), + /* KSZ9031 PHY Reset */ + NEW_PAD_CTRL(MX6_PAD_ENET_CRS_DV__GPIO1_IO25, GPIO_OUT_PAD_CTRL), +}; + +static void mba6_setup_iomuxc_enet(void) +{ + __raw_writel(IOMUX_SW_PAD_CTRL_GRP_RGMII_TERM_DISABLE, + (void *)IOMUX_SW_PAD_CTRL_GRP_RGMII_TERM); + __raw_writel(IOMUX_SW_PAD_CTRL_GRP_DDR_TYPE_RGMII_1P5V, + (void *)IOMUX_SW_PAD_CTRL_GRP_DDR_TYPE_RGMII); + + imx_iomux_v3_setup_multiple_pads(mba6_enet_pads, + ARRAY_SIZE(mba6_enet_pads)); + + /* Reset PHY */ + gpio_direction_output(ENET_PHY_RESET_GPIO , 0); + /* Need delay 10ms after power on according to KSZ9031 spec */ + udelay(1000 * 10); + gpio_set_value(ENET_PHY_RESET_GPIO, 1); + /* + * KSZ9031 manual: 100 usec wait time after reset before communication + * over MDIO + * BUGBUG: hardware has an RC const that needs > 10 msec from 0->1 on + * reset before the phy sees a high level + */ + udelay(200); +} + +static iomux_v3_cfg_t const mba6_uart2_pads[] = { + NEW_PAD_CTRL(MX6_PAD_SD4_DAT4__UART2_RX_DATA, UART_PAD_CTRL), + NEW_PAD_CTRL(MX6_PAD_SD4_DAT7__UART2_TX_DATA, UART_PAD_CTRL), +}; + +static void mba6_setup_iomuxc_uart(void) +{ + imx_iomux_v3_setup_multiple_pads(mba6_uart2_pads, + ARRAY_SIZE(mba6_uart2_pads)); +} + +#define USDHC2_CD_GPIO IMX_GPIO_NR(1, 4) +#define USDHC2_WP_GPIO IMX_GPIO_NR(1, 2) + +int tqma6_bb_board_mmc_getcd(struct mmc *mmc) +{ + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; + int ret = 0; + + if (cfg->esdhc_base == USDHC2_BASE_ADDR) + ret = !gpio_get_value(USDHC2_CD_GPIO); + + return ret; +} + +int tqma6_bb_board_mmc_getwp(struct mmc *mmc) +{ + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; + int ret = 0; + + if (cfg->esdhc_base == USDHC2_BASE_ADDR) + ret = gpio_get_value(USDHC2_WP_GPIO); + + return ret; +} + +static struct fsl_esdhc_cfg mba6_usdhc_cfg = { + .esdhc_base = USDHC2_BASE_ADDR, + .max_bus_width = 4, +}; + +static iomux_v3_cfg_t const mba6_usdhc2_pads[] = { + NEW_PAD_CTRL(MX6_PAD_SD2_CLK__SD2_CLK, USDHC_CLK_PAD_CTRL), + NEW_PAD_CTRL(MX6_PAD_SD2_CMD__SD2_CMD, USDHC_PAD_CTRL), + NEW_PAD_CTRL(MX6_PAD_SD2_DAT0__SD2_DATA0, USDHC_PAD_CTRL), + NEW_PAD_CTRL(MX6_PAD_SD2_DAT1__SD2_DATA1, USDHC_PAD_CTRL), + NEW_PAD_CTRL(MX6_PAD_SD2_DAT2__SD2_DATA2, USDHC_PAD_CTRL), + NEW_PAD_CTRL(MX6_PAD_SD2_DAT3__SD2_DATA3, USDHC_PAD_CTRL), + /* CD */ + NEW_PAD_CTRL(MX6_PAD_GPIO_4__GPIO1_IO04, GPIO_IN_PAD_CTRL), + /* WP */ + NEW_PAD_CTRL(MX6_PAD_GPIO_2__GPIO1_IO02, GPIO_IN_PAD_CTRL), +}; + +int tqma6_bb_board_mmc_init(bd_t *bis) +{ + imx_iomux_v3_setup_multiple_pads(mba6_usdhc2_pads, + ARRAY_SIZE(mba6_usdhc2_pads)); + gpio_direction_input(USDHC2_CD_GPIO); + gpio_direction_input(USDHC2_WP_GPIO); + + mba6_usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); + if (fsl_esdhc_initialize(bis, &mba6_usdhc_cfg)) + puts("Warning: failed to initialize SD\n"); + + return 0; +} + +static struct i2c_pads_info mba6_i2c1_pads = { +/* I2C1: MBa6x */ + .scl = { + .i2c_mode = NEW_PAD_CTRL(MX6_PAD_CSI0_DAT9__I2C1_SCL, + I2C_PAD_CTRL), + .gpio_mode = NEW_PAD_CTRL(MX6_PAD_CSI0_DAT9__GPIO5_IO27, + I2C_PAD_CTRL), + .gp = IMX_GPIO_NR(5, 27) + }, + .sda = { + .i2c_mode = NEW_PAD_CTRL(MX6_PAD_CSI0_DAT8__I2C1_SDA, + I2C_PAD_CTRL), + .gpio_mode = NEW_PAD_CTRL(MX6_PAD_CSI0_DAT8__GPIO5_IO26, + I2C_PAD_CTRL), + .gp = IMX_GPIO_NR(5, 26) + } +}; + +static void mba6_setup_i2c(void) +{ + /* use logical index for bus, e.g. I2C1 -> 0 */ + setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &mba6_i2c1_pads); +} + + +static iomux_v3_cfg_t const mba6_ecspi1_pads[] = { + NEW_PAD_CTRL(MX6_PAD_EIM_D24__GPIO3_IO24, SPI_PAD_CTRL), + NEW_PAD_CTRL(MX6_PAD_EIM_D25__GPIO3_IO25, SPI_PAD_CTRL), +}; + +static unsigned const mba6_ecspi1_cs[] = { + IMX_GPIO_NR(3, 24), + IMX_GPIO_NR(3, 25), +}; + +static void mba6_setup_iomuxc_spi(void) +{ + unsigned i; + + for (i = 0; i < ARRAY_SIZE(mba6_ecspi1_cs); ++i) + gpio_direction_output(mba6_ecspi1_cs[i], 1); + imx_iomux_v3_setup_multiple_pads(mba6_ecspi1_pads, + ARRAY_SIZE(mba6_ecspi1_pads)); +} + +int board_phy_config(struct phy_device *phydev) +{ +/* + * optimized pad skew values depends on CPU variant on the TQMa6x module: + * i.MX6Q/D or i.MX6DL/S + */ +#if defined(CONFIG_MX6Q) || defined(CONFIG_MX6Q) +#define MBA6X_KSZ9031_CTRL_SKEW 0x0032 +#define MBA6X_KSZ9031_CLK_SKEW 0x03ff +#define MBA6X_KSZ9031_RX_SKEW 0x3333 +#define MBA6X_KSZ9031_TX_SKEW 0x2036 +#elif defined(CONFIG_MX6DL) || defined(CONFIG_MX6S) +#define MBA6X_KSZ9031_CTRL_SKEW 0x0030 +#define MBA6X_KSZ9031_CLK_SKEW 0x03ff +#define MBA6X_KSZ9031_RX_SKEW 0x3333 +#define MBA6X_KSZ9031_TX_SKEW 0x2052 +#else +#error +#endif + /* min rx/tx ctrl delay */ + ksz9031_phy_extended_write(phydev, 2, + MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW, + MII_KSZ9031_MOD_DATA_NO_POST_INC, + MBA6X_KSZ9031_CTRL_SKEW); + /* min rx delay */ + ksz9031_phy_extended_write(phydev, 2, + MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW, + MII_KSZ9031_MOD_DATA_NO_POST_INC, + MBA6X_KSZ9031_RX_SKEW); + /* max tx delay */ + ksz9031_phy_extended_write(phydev, 2, + MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW, + MII_KSZ9031_MOD_DATA_NO_POST_INC, + MBA6X_KSZ9031_TX_SKEW); + /* rx/tx clk skew */ + ksz9031_phy_extended_write(phydev, 2, + MII_KSZ9031_EXT_RGMII_CLOCK_SKEW, + MII_KSZ9031_MOD_DATA_NO_POST_INC, + MBA6X_KSZ9031_CLK_SKEW); + + phydev->drv->config(phydev); + + return 0; +} + +int board_eth_init(bd_t *bis) +{ + uint32_t base = IMX_FEC_BASE; + struct mii_dev *bus = NULL; + struct phy_device *phydev = NULL; + int ret; + + bus = fec_get_miibus(base, -1); + if (!bus) + return 0; + /* scan phy */ + phydev = phy_find_by_mask(bus, (0xf << CONFIG_FEC_MXC_PHYADDR), + PHY_INTERFACE_MODE_RGMII); + + if (!phydev) { + free(bus); + puts("No phy found\n"); + return 0; + } + ret = fec_probe(bis, -1, base, bus, phydev); + if (ret) { + puts("FEC MXC: probe failed\n"); + free(phydev); + free(bus); + } + + return 0; +} + +int tqma6_bb_board_early_init_f(void) +{ + mba6_setup_iomuxc_uart(); + + return 0; +} + +int tqma6_bb_board_init(void) +{ + mba6_setup_i2c(); + mba6_setup_iomuxc_spi(); + /* do it here - to have reset completed */ + mba6_setup_iomuxc_enet(); + + return 0; +} + +int tqma6_bb_board_late_init(void) +{ + return 0; +} + +const char *tqma6_bb_get_boardname(void) +{ + return "MBa6x"; +} + +/* + * Device Tree Support + */ +#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) +void tqma6_bb_ft_board_setup(void *blob, bd_t *bd) +{ + /* TBD */ +} +#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */ diff --git a/board/tqc/tqma6/tqma6q.cfg b/board/tqc/tqma6/tqma6q.cfg new file mode 100644 index 0000000000..f54dff7bf2 --- /dev/null +++ b/board/tqc/tqma6/tqma6q.cfg @@ -0,0 +1,125 @@ +/* + * Copyright (C) 2013, 2014 Markus Niebel + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Refer doc/README.imximage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +/* image version */ +IMAGE_VERSION 2 + +#define __ASSEMBLY__ +#include + +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ +#if defined(CONFIG_TQMA6X_MMC_BOOT) +BOOT_FROM sd +#elif defined(CONFIG_TQMA6X_SPI_BOOT) +BOOT_FROM spi +#endif + +#include "asm/arch/mx6-ddr.h" +#include "asm/arch/iomux.h" +#include "asm/arch/crm_regs.h" + +/* TQMa6Q/D DDR config Rev. 0100B */ +/* IOMUX configuration */ +DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000C0000 +DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000 +DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00008030 +DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00008030 +DATA 4, MX6_IOM_DRAM_CAS, 0x00008030 +DATA 4, MX6_IOM_DRAM_RAS, 0x00008030 +DATA 4, MX6_IOM_GRP_ADDDS, 0x00000030 +DATA 4, MX6_IOM_DRAM_RESET, 0x000C3030 +DATA 4, MX6_IOM_DRAM_SDCKE0, 0x00003000 +DATA 4, MX6_IOM_DRAM_SDCKE1, 0x00000000 +DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000 +DATA 4, MX6_IOM_DRAM_SDODT0, 0x00003030 +DATA 4, MX6_IOM_DRAM_SDODT1, 0x00003030 +DATA 4, MX6_IOM_GRP_CTLDS, 0x00000030 +DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000 +DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000030 +DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000 +DATA 4, MX6_IOM_GRP_B0DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B1DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B2DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B3DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B4DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B5DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B6DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B7DS, 0x00000030 +DATA 4, MX6_IOM_DRAM_DQM0, 0x00000030 +DATA 4, MX6_IOM_DRAM_DQM1, 0x00000030 +DATA 4, MX6_IOM_DRAM_DQM2, 0x00000030 +DATA 4, MX6_IOM_DRAM_DQM3, 0x00000030 +DATA 4, MX6_IOM_DRAM_DQM4, 0x00000030 +DATA 4, MX6_IOM_DRAM_DQM5, 0x00000030 +DATA 4, MX6_IOM_DRAM_DQM6, 0x00000030 +DATA 4, MX6_IOM_DRAM_DQM7, 0x00000030 + +/* memory interface calibration values */ +DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003 +DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003 +DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x001B0013 +DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x0018001B +DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x001B0016 +DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x0012001C +DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x43400350 +DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x023E032C +DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x43400348 +DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x03300304 +DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x3C323436 +DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x38383242 +DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x3E3C4440 +DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x4236483E +DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333 +DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333 +DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333 +DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333 +DATA 4, MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333 +DATA 4, MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333 +DATA 4, MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333 +DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333 +DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800 +DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800 + +/* configure memory interface */ +DATA 4, MX6_MMDC_P0_MDPDC, 0x00020036 +DATA 4, MX6_MMDC_P0_MDOTC, 0x09444040 +DATA 4, MX6_MMDC_P0_MDCFG0, 0x545A79B4 +DATA 4, MX6_MMDC_P0_MDCFG1, 0xDB538F64 +DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB +DATA 4, MX6_MMDC_P0_MDMISC, 0x00001740 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000 +DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2 +DATA 4, MX6_MMDC_P0_MDOR, 0x005A1023 +DATA 4, MX6_MMDC_P0_MDASP, 0x00000027 +DATA 4, MX6_MMDC_P0_MDCTL, 0x831A0000 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00088032 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031 +DATA 4, MX6_MMDC_P0_MDSCR, 0x09308030 +DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040 +DATA 4, MX6_MMDC_P0_MDREF, 0x00005800 +DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022222 +DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022222 +DATA 4, MX6_MMDC_P0_MDPDC, 0x00025536 +DATA 4, MX6_MMDC_P0_MAPSR, 0x00001006 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 + +#include "clocks.cfg" diff --git a/board/tqc/tqma6/tqma6s.cfg b/board/tqc/tqma6/tqma6s.cfg new file mode 100644 index 0000000000..24d4e2f562 --- /dev/null +++ b/board/tqc/tqma6/tqma6s.cfg @@ -0,0 +1,125 @@ +/* + * Copyright (C) 2013, 2014 Markus Niebel + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Refer doc/README.imximage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +/* image version */ +IMAGE_VERSION 2 + +#define __ASSEMBLY__ +#include + +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ +#if defined(CONFIG_TQMA6X_MMC_BOOT) +BOOT_FROM sd +#elif defined(CONFIG_TQMA6X_SPI_BOOT) +BOOT_FROM spi +#endif + +#include "asm/arch/mx6-ddr.h" +#include "asm/arch/iomux.h" +#include "asm/arch/crm_regs.h" + +/* TQMa6S DDR config Rev. 0100B */ +/* IOMUX configuration */ +DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000C0000 +DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000 +DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00008000 +DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00008030 +DATA 4, MX6_IOM_DRAM_CAS, 0x00008030 +DATA 4, MX6_IOM_DRAM_RAS, 0x00008030 +DATA 4, MX6_IOM_GRP_ADDDS, 0x00000030 +DATA 4, MX6_IOM_DRAM_RESET, 0x000C3030 +DATA 4, MX6_IOM_DRAM_SDCKE0, 0x00003000 +DATA 4, MX6_IOM_DRAM_SDCKE1, 0x00000000 +DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000 +DATA 4, MX6_IOM_DRAM_SDODT0, 0x00003030 +DATA 4, MX6_IOM_DRAM_SDODT1, 0x00003030 +DATA 4, MX6_IOM_GRP_CTLDS, 0x00000030 +DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000 +DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000000 +DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000000 +DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000000 +DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000000 +DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000 +DATA 4, MX6_IOM_GRP_B0DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B1DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B2DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B3DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B4DS, 0x00000000 +DATA 4, MX6_IOM_GRP_B5DS, 0x00000000 +DATA 4, MX6_IOM_GRP_B6DS, 0x00000000 +DATA 4, MX6_IOM_GRP_B7DS, 0x00000000 +DATA 4, MX6_IOM_DRAM_DQM0, 0x00000030 +DATA 4, MX6_IOM_DRAM_DQM1, 0x00000030 +DATA 4, MX6_IOM_DRAM_DQM2, 0x00000030 +DATA 4, MX6_IOM_DRAM_DQM3, 0x00000030 +DATA 4, MX6_IOM_DRAM_DQM4, 0x00000000 +DATA 4, MX6_IOM_DRAM_DQM5, 0x00000000 +DATA 4, MX6_IOM_DRAM_DQM6, 0x00000000 +DATA 4, MX6_IOM_DRAM_DQM7, 0x00000000 + +/* memory interface calibration values */ +DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003 +DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1380000 +DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x0014000E +DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x00120014 +DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x00000000 +DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x00000000 +DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x0240023C +DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x0228022C +DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x00000000 +DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x00000000 +DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x4A4A4E4A +DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x00000000 +DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x36362A32 +DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x00000000 +DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333 +DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333 +DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333 +DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333 +DATA 4, MX6_MMDC_P1_MPRDDQBY0DL, 0x00000000 +DATA 4, MX6_MMDC_P1_MPRDDQBY1DL, 0x00000000 +DATA 4, MX6_MMDC_P1_MPRDDQBY2DL, 0x00000000 +DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x00000000 +DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800 +DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000000 + +/* configure memory interface */ +DATA 4, MX6_MMDC_P0_MDPDC, 0x0002002D +DATA 4, MX6_MMDC_P0_MDOTC, 0x00333030 +DATA 4, MX6_MMDC_P0_MDCFG0, 0x3F435333 +DATA 4, MX6_MMDC_P0_MDCFG1, 0xB68E8B63 +DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB +DATA 4, MX6_MMDC_P0_MDMISC, 0x00001740 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000 +DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2 +DATA 4, MX6_MMDC_P0_MDOR, 0x00431023 +DATA 4, MX6_MMDC_P0_MDASP, 0x00000017 +DATA 4, MX6_MMDC_P0_MDCTL, 0x83190000 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00008032 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031 +DATA 4, MX6_MMDC_P0_MDSCR, 0x05208030 +DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040 +DATA 4, MX6_MMDC_P0_MDREF, 0x00005800 +DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022222 +DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00000000 +DATA 4, MX6_MMDC_P0_MDPDC, 0x0002552D +DATA 4, MX6_MMDC_P0_MAPSR, 0x00001006 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 + +#include "clocks.cfg" diff --git a/boards.cfg b/boards.cfg index e3ecea3b67..8a46be5a44 100644 --- a/boards.cfg +++ b/boards.cfg @@ -335,6 +335,10 @@ Active arm armv7 mx6 freescale mx6slevk Active arm armv7 mx6 freescale mx6sxsabresd mx6sxsabresd mx6sxsabresd:IMX_CONFIG=board/freescale/mx6sxsabresd/imximage.cfg,MX6SX Fabio Estevam Active arm armv7 mx6 gateworks gw_ventana gwventana gw_ventana:IMX_CONFIG=board/gateworks/gw_ventana/gw_ventana.cfg,MX6QDL,SPL Tim Harvey Active arm armv7 mx6 solidrun hummingboard hummingboard_solo hummingboard:IMX_CONFIG=board/solidrun/hummingboard/solo.cfg,MX6S,DDR_MB=512 Jon Nettleton +Active arm armv7 mx6 tqc tqma6 tqma6q_mba6_mmc tqma6:IMX_CONFIG=board/tqc/tqma6/tqma6q.cfg,MX6Q,MBA6,TQMA6X_MMC_BOOT Markus Niebel +Active arm armv7 mx6 tqc tqma6 tqma6q_mba6_spi tqma6:IMX_CONFIG=board/tqc/tqma6/tqma6q.cfg,MX6Q,MBA6,TQMA6X_SPI_BOOT Markus Niebel +Active arm armv7 mx6 tqc tqma6 tqma6s_mba6_mmc tqma6:IMX_CONFIG=board/tqc/tqma6/tqma6s.cfg,MX6S,MBA6,TQMA6X_MMC_BOOT Markus Niebel +Active arm armv7 mx6 tqc tqma6 tqma6s_mba6_spi tqma6:IMX_CONFIG=board/tqc/tqma6/tqma6s.cfg,MX6S,MBA6,TQMA6X_SPI_BOOT Markus Niebel Active arm armv7 omap3 - overo omap3_overo - Steve Sakoman Active arm armv7 omap3 - pandora omap3_pandora - Grazvydas Ignotas Active arm armv7 omap3 8dtech eco5pk eco5pk - Raphael Assenat diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h new file mode 100644 index 0000000000..2705d2c55f --- /dev/null +++ b/include/configs/tqma6.h @@ -0,0 +1,483 @@ +/* + * Copyright (C) 2013, 2014 Markus Niebel + * + * Configuration settings for the TQ Systems TQMa6 module. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include "mx6_common.h" +#include +#include +#include + +#define CONFIG_MX6 + +#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S) +#define PHYS_SDRAM_SIZE (512u * SZ_1M) +#elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6D) +#define PHYS_SDRAM_SIZE (1024u * SZ_1M) +#endif + +#if defined(CONFIG_MBA6) + +#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S) +#define CONFIG_DEFAULT_FDT_FILE "imx6dl-mba6x.dtb" +#elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6Q) +#define CONFIG_DEFAULT_FDT_FILE "imx6q-mba6x.dtb" +#endif + +#endif + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_SYS_GENERIC_BOARD + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_LATE_INIT + +#define CONFIG_MXC_GPIO +#define CONFIG_MXC_UART + +/* SPI */ +#define CONFIG_CMD_SPI +#define CONFIG_MXC_SPI + +/* SPI Flash */ +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO + +#define CONFIG_CMD_SF +#define CONFIG_SF_DEFAULT_BUS 0 +#define CONFIG_SF_DEFAULT_CS (0 | (IMX_GPIO_NR(3, 19) << 8)) +#define CONFIG_SF_DEFAULT_SPEED 50000000 +#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) + +/* I2C Configs */ +#define CONFIG_CMD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_SYS_I2C_SPEED 100000 + +/* I2C SYSMON (LM75) */ +#define CONFIG_DTT_LM75 +#if defined(CONFIG_MBA6) +#define CONFIG_DTT_SENSORS { 0, 1 } +#else +#define CONFIG_DTT_SENSORS { 0 } +#endif +#define CONFIG_DTT_MAX_TEMP 70 +#define CONFIG_DTT_MIN_TEMP -30 +#define CONFIG_DTT_HYSTERESIS 3 +#define CONFIG_CMD_DTT + +/* I2C EEPROM (M24C64) */ +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_I2C_EEPROM_PAGE_WRITE_BITS 5 /* 32 Bytes */ +#define CONFIG_SYS_I2C_EEPROM_PAGE_WRITE_DELAY_MS 20 +#define CONFIG_CMD_EEPROM + +#define CONFIG_POWER +#define CONFIG_POWER_I2C +#define CONFIG_POWER_PFUZE100 +#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 +#define TQMA6_PFUZE100_I2C_BUS 2 + +/* MMC Configs */ +#define CONFIG_FSL_ESDHC +#define CONFIG_FSL_USDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 + +#define CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_BOUNCE_BUFFER + +/* USB Configs */ +#define CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MX6 +#define CONFIG_USB_STORAGE +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_SMSC95XX +#define CONFIG_MXC_USB_PORT 1 +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 + +/* Fuses */ +#define CONFIG_MXC_OCOTP +#define CONFIG_CMD_FUSE + +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION + +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET + +#define CONFIG_FEC_MXC +#define IMX_FEC_BASE ENET_BASE_ADDR +#define CONFIG_PHYLIB +#define CONFIG_MII + +#if defined(CONFIG_MBA6) + +#define CONFIG_FEC_XCV_TYPE RGMII +#define CONFIG_ETHPRIME "FEC" + +#define CONFIG_FEC_MXC_PHYADDR 0x03 +#define CONFIG_PHY_MICREL +#define CONFIG_PHY_KSZ9031 + +#else + +#error "define PHY to use for your baseboard" + +#endif + +#define CONFIG_ARP_TIMEOUT 200UL +/* Network config - Allow larger/faster download for TFTP/NFS */ +#define CONFIG_IP_DEFRAG +#define CONFIG_TFTP_BLOCKSIZE 4096 +#define CONFIG_NFS_READ_SIZE 4096 + +#if defined(CONFIG_MBA6) + +#define CONFIG_MXC_UART_BASE UART2_BASE +#define CONFIG_CONSOLE_DEV "ttymxc1" + +#else + +#error "define baseboard specific things (uart, number of SD-card slots)" + +#endif + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 + +/* Command definition */ +#include + +#define CONFIG_CMD_BMODE +#define CONFIG_CMD_BOOTZ +#define CONFIG_CMD_ITEST +#define CONFIG_CMD_SETEXPR +#undef CONFIG_CMD_IMLS + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_LOADADDR 0x12000000 + +/* place code in last 4 MiB of RAM */ +#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S) +#define CONFIG_SYS_TEXT_BASE 0x2fc00000 +#elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6D) +#define CONFIG_SYS_TEXT_BASE 0x4fc00000 +#endif + +#define CONFIG_ENV_SIZE (SZ_8K) +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * SZ_1M) + +#if defined(CONFIG_TQMA6X_MMC_BOOT) + +#define CONFIG_ENV_IS_IN_MMC +#define TQMA6_UBOOT_OFFSET SZ_1K +#define TQMA6_UBOOT_SECTOR_START 0x2 +#define TQMA6_UBOOT_SECTOR_COUNT 0x7fe + +#define CONFIG_ENV_OFFSET SZ_1M +#define CONFIG_SYS_MMC_ENV_DEV 0 + +#define TQMA6_FDT_OFFSET (2 * SZ_1M) +#define TQMA6_FDT_SECTOR_START 0x1000 +#define TQMA6_FDT_SECTOR_COUNT 0x800 + +#define TQMA6_KERNEL_SECTOR_START 0x2000 +#define TQMA6_KERNEL_SECTOR_COUNT 0x2000 + +#define TQMA6_EXTRA_BOOTDEV_ENV_SETTINGS \ + "uboot_start="__stringify(TQMA6_UBOOT_SECTOR_START)"\0" \ + "uboot_size="__stringify(TQMA6_UBOOT_SECTOR_COUNT)"\0" \ + "fdt_start="__stringify(TQMA6_FDT_SECTOR_START)"\0" \ + "fdt_size="__stringify(TQMA6_FDT_SECTOR_COUNT)"\0" \ + "kernel_start="__stringify(TQMA6_KERNEL_SECTOR_START)"\0" \ + "kernel_size="__stringify(TQMA6_KERNEL_SECTOR_COUNT)"\0" \ + "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ + "loadimage=mmc dev ${mmcdev}; " \ + "mmc read ${loadaddr} ${kernel_start} ${kernel_size};\0" \ + "loadfdt=mmc dev ${mmcdev}; " \ + "mmc read ${fdt_addr} ${fdt_start} ${fdt_size};\0" \ + "update_uboot=if tftp ${uboot}; then " \ + "if itest ${filesize} > 0; then " \ + "mmc dev ${mmcdev}; mmc rescan; " \ + "setexpr blkc ${filesize} / 0x200; " \ + "setexpr blkc ${blkc} + 1; " \ + "if itest ${blkc} <= ${uboot_size}; then " \ + "mmc write ${loadaddr} ${uboot_start} " \ + "${blkc}; " \ + "fi; " \ + "fi; fi; " \ + "setenv filesize; setenv blkc \0" \ + "update_kernel=run kernel_name; " \ + "if tftp ${kernel}; then " \ + "if itest ${filesize} > 0; then " \ + "mmc dev ${mmcdev}; mmc rescan; " \ + "setexpr blkc ${filesize} / 0x200; " \ + "setexpr blkc ${blkc} + 1; " \ + "if itest ${blkc} <= ${kernel_size}; then " \ + "mmc write ${loadaddr} " \ + "${kernel_start} ${blkc}; " \ + "fi; " \ + "fi; " \ + "fi; " \ + "setenv filesize; setenv blkc \0" \ + "update_fdt=if tftp ${fdt_file}; then " \ + "if itest ${filesize} > 0; then " \ + "mmc dev ${mmcdev}; mmc rescan; " \ + "setexpr blkc ${filesize} / 0x200; " \ + "setexpr blkc ${blkc} + 1; " \ + "if itest ${blkc} <= ${fdt_size}; then " \ + "mmc write ${loadaddr} ${fdt_start} ${blkc}; " \ + "fi; " \ + "fi; fi; " \ + "setenv filesize; setenv blkc \0" \ + +#define CONFIG_BOOTCOMMAND \ + "run mmcboot; run netboot; run panicboot" + +#elif defined(CONFIG_TQMA6X_SPI_BOOT) + +#define CONFIG_FLASH_SECTOR_SIZE 0x10000 + +#define TQMA6_UBOOT_OFFSET 0x400 +#define TQMA6_UBOOT_SECTOR_START 0x0 +/* max u-boot size: 512k */ +#define TQMA6_UBOOT_SECTOR_SIZE CONFIG_FLASH_SECTOR_SIZE +#define TQMA6_UBOOT_SECTOR_COUNT 0x8 +#define TQMA6_UBOOT_SIZE (TQMA6_UBOOT_SECTOR_SIZE * \ + TQMA6_UBOOT_SECTOR_COUNT) + +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_SYS_REDUNDAND_ENVIRONMENT +#define CONFIG_ENV_OFFSET (TQMA6_UBOOT_SIZE) +#define CONFIG_ENV_SECT_SIZE CONFIG_FLASH_SECTOR_SIZE +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \ + CONFIG_ENV_SECT_SIZE) + +#define CONFIG_ENV_SPI_BUS (CONFIG_SF_DEFAULT_BUS) +#define CONFIG_ENV_SPI_CS (CONFIG_SF_DEFAULT_CS) +#define CONFIG_ENV_SPI_MAX_HZ (CONFIG_SF_DEFAULT_SPEED) +#define CONFIG_ENV_SPI_MODE (CONFIG_SF_DEFAULT_MODE) + +#define TQMA6_FDT_OFFSET (CONFIG_ENV_OFFSET_REDUND + \ + CONFIG_ENV_SECT_SIZE) +#define TQMA6_FDT_SECT_SIZE (CONFIG_FLASH_SECTOR_SIZE) + +#define TQMA6_FDT_SECTOR_START 0x0a /* 8 Sector u-boot, 2 Sector env */ +#define TQMA6_FDT_SECTOR_COUNT 0x01 + +#define TQMA6_KERNEL_SECTOR_START 0x10 +#define TQMA6_KERNEL_SECTOR_COUNT 0x60 + +#define TQMA6_EXTRA_BOOTDEV_ENV_SETTINGS \ + "mmcblkdev=0\0" \ + "uboot_offset="__stringify(TQMA6_UBOOT_OFFSET)"\0" \ + "uboot_sectors="__stringify(TQMA6_UBOOT_SECTOR_COUNT)"\0" \ + "fdt_start="__stringify(TQMA6_FDT_SECTOR_START)"\0" \ + "fdt_sectors="__stringify(TQMA6_FDT_SECTOR_COUNT)"\0" \ + "kernel_start="__stringify(TQMA6_KERNEL_SECTOR_START)"\0" \ + "kernel_sectors="__stringify(TQMA6_KERNEL_SECTOR_COUNT)"\0" \ + "update_uboot=if tftp ${uboot}; then " \ + "if itest ${filesize} > 0; then " \ + "setexpr blkc ${filesize} + " \ + __stringify(TQMA6_UBOOT_OFFSET) "; " \ + "setexpr size ${uboot_sectors} * " \ + __stringify(CONFIG_FLASH_SECTOR_SIZE)"; " \ + "if itest ${blkc} <= ${size}; then " \ + "sf probe; " \ + "sf erase 0 ${size}; " \ + "sf write ${loadaddr} ${uboot_offset} " \ + "${filesize}; " \ + "fi; " \ + "fi; fi; " \ + "setenv filesize 0; setenv blkc; setenv size \0" \ + "update_kernel=run kernel_name; if tftp ${kernel}; then " \ + "if itest ${filesize} > 0; then " \ + "setexpr size ${kernel_sectors} * " \ + __stringify(CONFIG_FLASH_SECTOR_SIZE)"; " \ + "setexpr offset ${kernel_start} * " \ + __stringify(CONFIG_FLASH_SECTOR_SIZE)"; " \ + "if itest ${filesize} <= ${size}; then " \ + "sf probe; " \ + "sf erase ${offset} ${size}; " \ + "sf write ${loadaddr} ${offset} " \ + "${filesize}; " \ + "fi; " \ + "fi; fi; " \ + "setenv filesize 0; setenv size ; setenv offset\0" \ + "update_fdt=if tftp ${fdt_file}; then " \ + "if itest ${filesize} > 0; then " \ + "setexpr size ${fdt_sectors} * " \ + __stringify(CONFIG_FLASH_SECTOR_SIZE)"; " \ + "setexpr offset ${fdt_start} * " \ + __stringify(CONFIG_FLASH_SECTOR_SIZE)"; " \ + "if itest ${filesize} <= ${size}; then " \ + "sf probe; " \ + "sf erase ${offset} ${size}; " \ + "sf write ${loadaddr} ${offset} " \ + "${filesize}; " \ + "fi; " \ + "fi; fi; " \ + "setenv filesize 0; setenv size ; setenv offset\0" \ + "loadimage=sf probe; " \ + "setexpr size ${kernel_sectors} * " \ + __stringify(CONFIG_FLASH_SECTOR_SIZE)"; " \ + "setexpr offset ${kernel_start} * " \ + __stringify(CONFIG_FLASH_SECTOR_SIZE)"; " \ + "sf read ${loadaddr} ${offset} ${size}; " \ + "setenv size ; setenv offset\0" \ + "loadfdt=sf probe; " \ + "setexpr size ${fdt_sectors} * " \ + __stringify(CONFIG_FLASH_SECTOR_SIZE)"; " \ + "setexpr offset ${fdt_start} * " \ + __stringify(CONFIG_FLASH_SECTOR_SIZE)"; " \ + "sf read ${${fdt_addr}} ${offset} ${size}; " \ + "setenv size ; setenv offset\0" \ + + +#define CONFIG_BOOTCOMMAND \ + "sf probe; run mmcboot; run netboot; run panicboot" \ + +#else + +#error "need to define boot source" + +#endif + +/* 128 MiB offset as in ARM related docu for linux suggested */ +#define TQMA6_FDT_ADDRESS 0x18000000 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "board=tqma6\0" \ + "uimage=uImage\0" \ + "zimage=zImage\0" \ + "boot_type=bootz\0" \ + "kernel_name=if test \"${boot_type}\" != bootz; then " \ + "setenv kernel ${uimage}; " \ + "else setenv kernel ${zimage}; fi\0" \ + "uboot=u-boot.imx\0" \ + "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ + "fdt_addr="__stringify(TQMA6_FDT_ADDRESS)"\0" \ + "console=" CONFIG_CONSOLE_DEV "\0" \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" \ + "addtty=setenv bootargs ${bootargs} console=${console},${baudrate}\0" \ + "addfb=setenv bootargs ${bootargs} " \ + "imx-fbdev.legacyfb_depth=32 consoleblank=0\0" \ + "mmcpart=2\0" \ + "mmcblkdev=0\0" \ + "mmcargs=run addmmc addtty addfb\0" \ + "addmmc=setenv bootargs ${bootargs} " \ + "root=/dev/mmcblk${mmcblkdev}p${mmcpart} rw rootwait\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "setenv bootargs; " \ + "run mmcargs; " \ + "run loadimage; " \ + "if run loadfdt; then " \ + "echo boot device tree kernel ...; " \ + "${boot_type} ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "${boot_type}; " \ + "fi;\0" \ + "setenv bootargs \0" \ + "netdev=eth0\0" \ + "rootpath=/srv/nfs/tqma6\0" \ + "ipmode=static\0" \ + "netargs=run addnfs addip addtty addfb\0" \ + "addnfs=setenv bootargs ${bootargs} " \ + "root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath},v3,tcp;\0" \ + "addip_static=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \ + "${hostname}:${netdev}:off\0" \ + "addip_dynamic=setenv bootargs ${bootargs} ip=dhcp\0" \ + "addip=if test \"${ipmode}\" != static; then " \ + "run addip_dynamic; else run addip_static; fi\0" \ + "set_getcmd=if test \"${ipmode}\" != static; then " \ + "setenv getcmd dhcp; setenv autoload yes; " \ + "else setenv getcmd tftp; setenv autoload no; fi\0" \ + "netboot=echo Booting from net ...; " \ + "run kernel_name; " \ + "run set_getcmd; " \ + "setenv bootargs; " \ + "run netargs; " \ + "if ${getcmd} ${kernel}; then " \ + "if ${getcmd} ${fdt_addr} ${fdt_file}; then " \ + "${boot_type} ${loadaddr} - ${fdt_addr}; " \ + "fi; " \ + "fi; " \ + "echo ... failed\0" \ + "panicboot=echo No boot device !!! reset\0" \ + TQMA6_EXTRA_BOOTDEV_ENV_SETTINGS \ + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 512 + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_CMDLINE_EDITING +#define CONFIG_STACKSIZE (128u * SZ_1K) + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* FLASH and environment organization */ +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE + +#ifndef CONFIG_SYS_DCACHE_OFF +#define CONFIG_CMD_CACHE +#endif + +#endif /* __CONFIG_H */ From 25fe05722a038f8178a26c197ac84fda55b2f168 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 25 Jul 2014 17:23:35 +0200 Subject: [PATCH 18/47] arm: m53evk: Fix RTC bus number A previous update to the I2C stack introduced a typo in the configuration option. Fix the typo and therefore allow the RTC to work correctly with the 'date' command again. Signed-off-by: Marek Vasut Cc: Stefano Babic --- include/configs/m53evk.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/configs/m53evk.h b/include/configs/m53evk.h index 97196c6031..e5756d32e7 100644 --- a/include/configs/m53evk.h +++ b/include/configs/m53evk.h @@ -175,7 +175,7 @@ #ifdef CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_SPD_BUS_NUM 1 /* I2C2 */ +#define CONFIG_SYS_RTC_BUS_NUM 1 /* I2C2 */ #endif /* From 28344902457f453da08133f2eb684221a1b8ab91 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 1 Aug 2014 08:49:59 -0300 Subject: [PATCH 19/47] mx6: imx-regs: Remove unused 'omux' field from iomux struct 'omux' field is not used anywhere and such layout is not valid for mx6solox. Instead of adding more ifdef's into the structure, let's simply remove this unused 'omux' field. Signed-off-by: Fabio Estevam Acked-by: Stefano Babic --- arch/arm/include/asm/arch-mx6/imx-regs.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h index 437b434b1a..d4ce8a8733 100644 --- a/arch/arm/include/asm/arch-mx6/imx-regs.h +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h @@ -404,8 +404,6 @@ struct iomuxc { u8 reserved[0x4000]; #endif u32 gpr[14]; - u32 omux[5]; - /* mux and pad registers */ }; #define IOMUXC_GPR2_COUNTER_RESET_VAL_OFFSET 20 From 338c9da6053c7e02264fbec7568c271bb503ab1a Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 1 Aug 2014 08:50:00 -0300 Subject: [PATCH 20/47] mx6: crm_regs: Fix CDCDR_SPDIF0_CLK_PODF mask and offset According to the Reference Manual the 'spdif0_clk_podf' field of register CCM_CDCDR corresponds to bits 22, 23 and 24, so fix the mask and offset definitions accordingly. Signed-off-by: Fabio Estevam --- arch/arm/include/asm/arch-mx6/crm_regs.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h index 0fcef69768..9afe788389 100644 --- a/arch/arm/include/asm/arch-mx6/crm_regs.h +++ b/arch/arm/include/asm/arch-mx6/crm_regs.h @@ -335,8 +335,8 @@ struct mxc_ccm_reg { #endif #define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_MASK (0x7 << 25) #define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_OFFSET 25 -#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_MASK (0x7 << 19) -#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_OFFSET 19 +#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_MASK (0x7 << 22) +#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_OFFSET 22 #define MXC_CCM_CDCDR_SPDIF0_CLK_SEL_MASK (0x3 << 20) #define MXC_CCM_CDCDR_SPDIF0_CLK_SEL_OFFSET 20 #define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_MASK (0x7 << 12) From 326454a88da0843e762a88a662db503e5660e8f7 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 1 Aug 2014 08:50:01 -0300 Subject: [PATCH 21/47] mx6: crm_regs: Fix MXC_CCM_CLPCR_WB_PER_AT_LPM definition According to the Reference Manual the 'wb_per_at_lpm' field of register CCM_CLPCR corresponds to bit 16 so fix its definition accordingly. Signed-off-by: Fabio Estevam --- arch/arm/include/asm/arch-mx6/crm_regs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h index 9afe788389..e1cdcec8f5 100644 --- a/arch/arm/include/asm/arch-mx6/crm_regs.h +++ b/arch/arm/include/asm/arch-mx6/crm_regs.h @@ -432,7 +432,7 @@ struct mxc_ccm_reg { #define MXC_CCM_CLPCR_BYP_MMDC_CH0_LPM_HS (1 << 19) #define MXC_CCM_CLPCR_WB_CORE_AT_LPM (1 << 17) #endif -#define MXC_CCM_CLPCR_WB_PER_AT_LPM (1 << 17) +#define MXC_CCM_CLPCR_WB_PER_AT_LPM (1 << 16) #define MXC_CCM_CLPCR_COSC_PWRDOWN (1 << 11) #define MXC_CCM_CLPCR_STBY_COUNT_MASK (0x3 << 9) #define MXC_CCM_CLPCR_STBY_COUNT_OFFSET 9 From 9cd744ff117bae59c6ced331170ee44e9ab10ccd Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 1 Aug 2014 08:50:02 -0300 Subject: [PATCH 22/47] mx6: crm_regs: Fix MXC_CCM_CIMR_MASK_PERIPH2_CLK_SEL_LOADED According to the Reference Manual the 'mask_periph2_clk_sel_loaded' field of register CCM_CIMR corresponds to bit 19 so fix its definition accordingly. Signed-off-by: Fabio Estevam --- arch/arm/include/asm/arch-mx6/crm_regs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h index e1cdcec8f5..9a7fb34f03 100644 --- a/arch/arm/include/asm/arch-mx6/crm_regs.h +++ b/arch/arm/include/asm/arch-mx6/crm_regs.h @@ -469,7 +469,7 @@ struct mxc_ccm_reg { #define MXC_CCM_CIMR_MASK_PERIPH_CLK_SEL_LOADED (1 << 22) #define MXC_CCM_CIMR_MASK_MMDC_CH1_PODF_LOADED (1 << 21) #define MXC_CCM_CIMR_MASK_AHB_PODF_LOADED (1 << 20) -#define MXC_CCM_CIMR_MASK_PERIPH2_CLK_SEL_LOADED (1 << 22) +#define MXC_CCM_CIMR_MASK_PERIPH2_CLK_SEL_LOADED (1 << 19) #define MXC_CCM_CIMR_MASK_AXI_PODF_LOADED (1 << 17) #define MXC_CCM_CIMR_MASK_COSC_READY (1 << 6) #define MXC_CCM_CIMR_MASK_LRF_PLL 1 From 676ac24e07463630281c21af23808728e1b3ae38 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 1 Aug 2014 08:50:03 -0300 Subject: [PATCH 23/47] pmic: pmic_pfuze100: Use a shorter name for PMIC name It is redundant to use 'PFUZE100_PMIC' as the PMIC name because we already know it is a PMIC. Call it simply 'PFUZE100' instead. Cc: Tim Harvey Cc: Markus Niebel Signed-off-by: Fabio Estevam --- board/freescale/mx6sabresd/mx6sabresd.c | 2 +- board/freescale/mx6sxsabresd/mx6sxsabresd.c | 2 +- board/gateworks/gw_ventana/gw_ventana.c | 2 +- board/tqc/tqma6/tqma6.c | 4 ++-- drivers/power/pmic/pmic_pfuze100.c | 2 +- 5 files changed, 6 insertions(+), 6 deletions(-) diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c index d7c4b4f148..80c8ebdafc 100644 --- a/board/freescale/mx6sabresd/mx6sabresd.c +++ b/board/freescale/mx6sabresd/mx6sabresd.c @@ -466,7 +466,7 @@ static int pfuze_init(void) if (ret) return ret; - p = pmic_get("PFUZE100_PMIC"); + p = pmic_get("PFUZE100"); ret = pmic_probe(p); if (ret) return ret; diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c index 24d6a5196e..6cd2b4af9f 100644 --- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c +++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c @@ -90,7 +90,7 @@ static int pfuze_init(void) if (ret) return ret; - p = pmic_get("PFUZE100_PMIC"); + p = pmic_get("PFUZE100"); ret = pmic_probe(p); if (ret) return ret; diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index 9967f80d5e..ae1cf8702e 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -903,7 +903,7 @@ int power_init_board(void) /* configure PFUZE100 PMIC */ if (board_type == GW54xx || board_type == GW54proto) { power_pfuze100_init(I2C_PMIC); - p = pmic_get("PFUZE100_PMIC"); + p = pmic_get("PFUZE100"); if (p && !pmic_probe(p)) { pmic_reg_read(p, PFUZE100_DEVICEID, ®); printf("PMIC: PFUZE100 ID=0x%02x\n", reg); diff --git a/board/tqc/tqma6/tqma6.c b/board/tqc/tqma6/tqma6.c index 69c4551eca..b552bb8d7e 100644 --- a/board/tqc/tqma6/tqma6.c +++ b/board/tqc/tqma6/tqma6.c @@ -229,10 +229,10 @@ int board_late_init(void) * fixed in generic power code */ power_pfuze100_init(TQMA6_PFUZE100_I2C_BUS); - p = pmic_get("PFUZE100_PMIC"); + p = pmic_get("PFUZE100"); if (p && !pmic_probe(p)) { pmic_reg_read(p, PFUZE100_DEVICEID, ®); - printf("PMIC: PFUZE100_PMIC ID=0x%02x\n", reg); + printf("PMIC: PFUZE100 ID=0x%02x\n", reg); } tqma6_bb_board_late_init(); diff --git a/drivers/power/pmic/pmic_pfuze100.c b/drivers/power/pmic/pmic_pfuze100.c index 21f12d2564..22a04c02a3 100644 --- a/drivers/power/pmic/pmic_pfuze100.c +++ b/drivers/power/pmic/pmic_pfuze100.c @@ -13,7 +13,7 @@ int power_pfuze100_init(unsigned char bus) { - static const char name[] = "PFUZE100_PMIC"; + static const char name[] = "PFUZE100"; struct pmic *p = pmic_alloc(); if (!p) { From f93f21906e374d46c6abfbdf4eb9cb1ab51b6384 Mon Sep 17 00:00:00 2001 From: Magnus Lilja Date: Tue, 5 Aug 2014 19:03:07 +0200 Subject: [PATCH 24/47] i.MX31 PDK: Enable generic board for i.MX31 PDK Enable CONFIG_SYS_GENERIC_BOARD for the i.MX31 PDK board. Tested on actual hardware. Signed-off-by: Magnus Lilja Acked-by: Fabio Estevam --- include/configs/mx31pdk.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index f223788e5e..d80f5da2d5 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -20,6 +20,8 @@ #define CONFIG_ARM1136 /* This is an arm1136 CPU core */ #define CONFIG_MX31 /* in a mx31 */ +#define CONFIG_SYS_GENERIC_BOARD + #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO From 7e9291720d2b8b6c2f6ea494f7a3c42a875dbc73 Mon Sep 17 00:00:00 2001 From: Stefano Babic Date: Mon, 11 Aug 2014 10:18:41 +0200 Subject: [PATCH 25/47] Update aristainetos board to Kconfig aristainetos board was merged in u-boot-imx before Kconfig was integrated, but it is not yet mainline. Signed-off-by: Stefano Babic CC: Heiko Schocher Acked-by: Heiko Schocher --- arch/arm/Kconfig | 4 ++++ board/aristainetos/Kconfig | 19 +++++++++++++++++++ board/aristainetos/MAINTAINERS | 6 ++++++ configs/aristainetos_defconfig | 3 +++ 4 files changed, 32 insertions(+) create mode 100644 board/aristainetos/Kconfig create mode 100644 board/aristainetos/MAINTAINERS create mode 100644 configs/aristainetos_defconfig diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e385eda94c..63f8576aa3 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -512,6 +512,9 @@ config TARGET_CGTQMX6EVAL config TARGET_EMBESTMX6BOARDS bool "Support embestmx6boards" +config TARGET_ARISTAINETOS + bool "Support aristainetos" + config TARGET_MX6QARM2 bool "Support mx6qarm2" @@ -773,6 +776,7 @@ config TARGET_JORNADA endchoice source "board/8dtech/eco5pk/Kconfig" +source "board/aristainetos/Kconfig" source "board/Barix/ipam390/Kconfig" source "board/BuR/kwb/Kconfig" source "board/BuR/tseries/Kconfig" diff --git a/board/aristainetos/Kconfig b/board/aristainetos/Kconfig new file mode 100644 index 0000000000..58078eacf5 --- /dev/null +++ b/board/aristainetos/Kconfig @@ -0,0 +1,19 @@ +if TARGET_ARISTAINETOS + +config SYS_CPU + string + default "armv7" + +config SYS_BOARD + string + default "aristainetos" + +config SYS_SOC + string + default "mx6" + +config SYS_CONFIG_NAME + string + default "aristainetos" + +endif diff --git a/board/aristainetos/MAINTAINERS b/board/aristainetos/MAINTAINERS new file mode 100644 index 0000000000..d45d4236c6 --- /dev/null +++ b/board/aristainetos/MAINTAINERS @@ -0,0 +1,6 @@ +ARISTAINETOS BOARD +M: Heiko Schocher +S: Maintained +F: board/aristainetos/ +F: include/configs/aristainetos.h +F: configs/aristainetos_defconfig diff --git a/configs/aristainetos_defconfig b/configs/aristainetos_defconfig new file mode 100644 index 0000000000..6541865b7c --- /dev/null +++ b/configs/aristainetos_defconfig @@ -0,0 +1,3 @@ +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aristainetos/aristainetos.cfg,MX6DL" +CONFIG_ARM=y +CONFIG_TARGET_ARISTAINETOS=y From 015e215bbf70214d7c3bec2eca691edb6b73b28e Mon Sep 17 00:00:00 2001 From: Iain Paton Date: Mon, 9 Jun 2014 23:08:35 +0100 Subject: [PATCH 26/47] embest/mx6boards: only toggle eMMC usdhc3 RST line on MarSboard On MarS usdhc3 is eMMC, on RIoT usdhc3 is uSD and eMMC is usdhc4. Don't run the MarS specific eMMC reset code on usdhc3 when board_type == BOARD_IS_RIOTBOARD Signed-off-by: Iain Paton --- board/embest/mx6boards/mx6boards.c | 1 + 1 file changed, 1 insertion(+) diff --git a/board/embest/mx6boards/mx6boards.c b/board/embest/mx6boards/mx6boards.c index d06b57d1e3..530ea4f3c4 100644 --- a/board/embest/mx6boards/mx6boards.c +++ b/board/embest/mx6boards/mx6boards.c @@ -246,6 +246,7 @@ int board_mmc_init(bd_t *bis) riotboard_usdhc3_pads, ARRAY_SIZE(riotboard_usdhc3_pads)); gpio_direction_input(USDHC3_CD_GPIO); + } else { gpio_direction_output(IMX_GPIO_NR(7, 8) , 0); udelay(250); gpio_set_value(IMX_GPIO_NR(7, 8), 1); From a76df7090882c32e9551590673fb76708346f85d Mon Sep 17 00:00:00 2001 From: Gabriel Huau Date: Sat, 26 Jul 2014 11:35:43 -0700 Subject: [PATCH 27/47] mx6: add support of multi-processor command This allows u-boot to load different OS or Bare Metal application on different cores of the i.MX6 SoC. For example: running Android on cpu0 and a RT OS like QNX/FreeRTOS on cpu1. Signed-off-by: Gabriel Huau Acked-by: Stefano Babic --- arch/arm/cpu/armv7/mx6/Makefile | 1 + arch/arm/cpu/armv7/mx6/mp.c | 87 +++++++++++++++++++++++ arch/arm/cpu/armv7/mx6/soc.c | 6 ++ arch/arm/include/asm/arch-mx6/imx-regs.h | 13 ++++ arch/arm/include/asm/arch-mx6/sys_proto.h | 1 + common/board_f.c | 8 +-- include/configs/mx6_common.h | 2 + 7 files changed, 114 insertions(+), 4 deletions(-) create mode 100644 arch/arm/cpu/armv7/mx6/mp.c diff --git a/arch/arm/cpu/armv7/mx6/Makefile b/arch/arm/cpu/armv7/mx6/Makefile index 6dc9f8ec21..bf6effc939 100644 --- a/arch/arm/cpu/armv7/mx6/Makefile +++ b/arch/arm/cpu/armv7/mx6/Makefile @@ -10,3 +10,4 @@ obj-y := soc.o clock.o obj-$(CONFIG_SPL_BUILD) += ddr.o obj-$(CONFIG_SECURE_BOOT) += hab.o +obj-$(CONFIG_MP) += mp.o diff --git a/arch/arm/cpu/armv7/mx6/mp.c b/arch/arm/cpu/armv7/mx6/mp.c new file mode 100644 index 0000000000..9f034d6e13 --- /dev/null +++ b/arch/arm/cpu/armv7/mx6/mp.c @@ -0,0 +1,87 @@ +/* + * (C) Copyright 2014 + * Gabriel Huau + * + * (C) Copyright 2009 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +#define MAX_CPUS 4 +static struct src *src = (struct src *)SRC_BASE_ADDR; + +static uint32_t cpu_reset_mask[MAX_CPUS] = { + 0, /* We don't really want to modify the cpu0 */ + SRC_SCR_CORE_1_RESET_MASK, + SRC_SCR_CORE_2_RESET_MASK, + SRC_SCR_CORE_3_RESET_MASK +}; + +static uint32_t cpu_ctrl_mask[MAX_CPUS] = { + 0, /* We don't really want to modify the cpu0 */ + SRC_SCR_CORE_1_ENABLE_MASK, + SRC_SCR_CORE_2_ENABLE_MASK, + SRC_SCR_CORE_3_ENABLE_MASK +}; + +int cpu_reset(int nr) +{ + /* Software reset of the CPU N */ + src->scr |= cpu_reset_mask[nr]; + return 0; +} + +int cpu_status(int nr) +{ + printf("core %d => %d\n", nr, !!(src->scr & cpu_ctrl_mask[nr])); + return 0; +} + +int cpu_release(int nr, int argc, char *const argv[]) +{ + uint32_t boot_addr; + + boot_addr = simple_strtoul(argv[0], NULL, 16); + + switch (nr) { + case 1: + src->gpr3 = boot_addr; + break; + case 2: + src->gpr5 = boot_addr; + break; + case 3: + src->gpr7 = boot_addr; + break; + default: + return 1; + } + + /* CPU N is ready to start */ + src->scr |= cpu_ctrl_mask[nr]; + + return 0; +} + +int is_core_valid(unsigned int core) +{ + uint32_t nr_cores = get_nr_cpus(); + + if (core > nr_cores) + return 0; + + return 1; +} + +int cpu_disable(int nr) +{ + /* Disable the CPU N */ + src->scr &= ~cpu_ctrl_mask[nr]; + return 0; +} diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index f2dee76941..ac84a1fbfb 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -35,6 +35,12 @@ struct scu_regs { u32 fpga_rev; }; +u32 get_nr_cpus(void) +{ + struct scu_regs *scu = (struct scu_regs *)SCU_BASE_ADDR; + return readl(&scu->config) & 3; +} + u32 get_cpu_rev(void) { struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR; diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h index d4ce8a8733..2631beb924 100644 --- a/arch/arm/include/asm/arch-mx6/imx-regs.h +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h @@ -324,6 +324,19 @@ extern void imx_get_mac_from_fuse(int dev_id, unsigned char *mac); +#define SRC_SCR_CORE_1_RESET_OFFSET 14 +#define SRC_SCR_CORE_1_RESET_MASK (1< #endif +#if (defined(CONFIG_MPC86xx) || defined(CONFIG_E500)) +#include +#endif #include #include @@ -43,9 +46,6 @@ #include #include #include -#ifdef CONFIG_MP -#include -#endif #include #ifdef CONFIG_X86 #include @@ -381,7 +381,7 @@ static int setup_dest_addr(void) gd->ram_top = board_get_usable_ram_top(gd->mon_len); gd->relocaddr = gd->ram_top; debug("Ram top: %08lX\n", (ulong)gd->ram_top); -#if defined(CONFIG_MP) && (defined(CONFIG_MPC86xx) || defined(CONFIG_E500)) +#if (defined(CONFIG_MPC86xx) || defined(CONFIG_E500)) /* * We need to make sure the location we intend to put secondary core * boot code is reserved and not used by any part of u-boot diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h index e4a5cc5be1..135a3f51f0 100644 --- a/include/configs/mx6_common.h +++ b/include/configs/mx6_common.h @@ -28,4 +28,6 @@ #define CONFIG_SYS_PL310_BASE L2_PL310_BASE #endif +#define CONFIG_MP + #endif From 5494b92dea9229b0dbcd1f40e8e888d44f39410d Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 12 Aug 2014 17:29:04 -0300 Subject: [PATCH 28/47] mx31pdk: Change maintainer Currently I don't have access to a mx31pdk board. Magnus was the original maintainer of the board and accepted to take back this role. Signed-off-by: Fabio Estevam Acked-by: Magnus Lilja Acked-by: Stefano Babic --- board/freescale/mx31pdk/MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/board/freescale/mx31pdk/MAINTAINERS b/board/freescale/mx31pdk/MAINTAINERS index 2e057db962..ec2a32063b 100644 --- a/board/freescale/mx31pdk/MAINTAINERS +++ b/board/freescale/mx31pdk/MAINTAINERS @@ -1,5 +1,5 @@ MX31PDK BOARD -M: Fabio Estevam +M: Magnus Lilja S: Maintained F: board/freescale/mx31pdk/ F: include/configs/mx31pdk.h From 68968901e79f91a2516ffa091959d0378526f838 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 4 Aug 2014 01:47:08 +0200 Subject: [PATCH 29/47] ARM: mx5: Fix CHSCCDR name Fix the name of the CCM CHSCCDR register. Signed-off-by: Marek Vasut --- arch/arm/include/asm/arch-mx5/crm_regs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/include/asm/arch-mx5/crm_regs.h b/arch/arm/include/asm/arch-mx5/crm_regs.h index efe57e07ea..b61c7b970a 100644 --- a/arch/arm/include/asm/arch-mx5/crm_regs.h +++ b/arch/arm/include/asm/arch-mx5/crm_regs.h @@ -40,7 +40,7 @@ struct mxc_ccm_reg { u32 cs1cdr; u32 cs2cdr; u32 cdcdr; /* 0x0030 */ - u32 chscdr; + u32 chsccdr; u32 cscdr2; u32 cscdr3; u32 cscdr4; /* 0x0040 */ From fcfdfdd58c67dbade1bafb48e393be2f432be33a Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 4 Aug 2014 01:47:09 +0200 Subject: [PATCH 30/47] ARM: mx6: Prevent overflow in DRAM size detection The MX6 DRAM controller can be configured to handle 4GiB of DRAM, but only 3840 MiB of that can be really used. In case the controller is configured to operate a 4GiB module, the imx_ddr_size() function will correctly compute that there is 4GiB of DRAM in the system. Firstly, the return value is 32-bit, so the function will effectively return zero. Secondly, the MX6 cannot address the full 4GiB, but only 3840MiB of all that. Thus, clamp the returned size to 3840MiB in such case. Signed-off-by: Marek Vasut Acked-by: Tim Harvey --- arch/arm/imx-common/cpu.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c index 7bb0e83a17..ed826a0e19 100644 --- a/arch/arm/imx-common/cpu.c +++ b/arch/arm/imx-common/cpu.c @@ -93,6 +93,11 @@ unsigned imx_ddr_size(void) bits += bank_lookup[ESD_MMDC_MISC_GET_BANK(misc)]; bits += ESD_MMDC_CTL_GET_WIDTH(ctl); bits += ESD_MMDC_CTL_GET_CS1(ctl); + + /* The MX6 can do only 3840 MiB of DRAM */ + if (bits == 32) + return 0xf0000000; + return 1 << bits; } #endif From b299ab7435b016d688c0665b3776ee897e4b6e17 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 4 Aug 2014 01:47:10 +0200 Subject: [PATCH 31/47] ARM: mx6: Handle the MMDCx_MDCTL COL field caprices The COL field value cannot be easily calculated from the desired column number. Instead, there are special cases for that, see the datasheet, MMDCx_MDCTL field description, field COL . Cater for those special cases. Signed-off-by: Marek Vasut --- arch/arm/cpu/armv7/mx6/ddr.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/arm/cpu/armv7/mx6/ddr.c b/arch/arm/cpu/armv7/mx6/ddr.c index 0434211110..1ab69f63c8 100644 --- a/arch/arm/cpu/armv7/mx6/ddr.c +++ b/arch/arm/cpu/armv7/mx6/ddr.c @@ -197,6 +197,7 @@ void mx6_dram_cfg(const struct mx6_ddr_sysinfo *i, u16 trcd, trc, tras, twr, tmrd, trtp, trp, twtr, trfc, txs, txpr; u16 CS0_END; u16 tdllk = 0x1ff; /* DLL locking time: 512 cycles (JEDEC DDR3) */ + u8 coladdr; int clkper; /* clock period in picoseconds */ int clock; /* clock freq in mHz */ int cs; @@ -422,8 +423,13 @@ void mx6_dram_cfg(const struct mx6_ddr_sysinfo *i, mmdc0->mdor = reg; /* Step 5: Configure DDR physical parameters (density and burst len) */ + coladdr = m->coladdr; + if (m->coladdr == 8) /* 8-bit COL is 0x3 */ + coladdr += 4; + else if (m->coladdr == 12) /* 12-bit COL is 0x4 */ + coladdr += 1; reg = (m->rowaddr - 11) << 24 | /* ROW */ - (m->coladdr - 9) << 20 | /* COL */ + (coladdr - 9) << 20 | /* COL */ (1 << 19) | /* Burst Length = 8 for DDR3 */ (i->dsize << 16); /* DDR data bus size */ mmdc0->mdctl = reg; From 0351ef97d7f8aef0ae03f80c43f2d6d7b97174e7 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 4 Aug 2014 01:47:11 +0200 Subject: [PATCH 32/47] ARM: mx6: Enable Thumb build for SPL Building the SPL in Thumb mode saves roughly 30% in size of the resulting SPL binary. As the size of SPL it limited on the MX6, this helps a lot. Signed-off-by: Marek Vasut Acked-by: Tim Harvey --- include/configs/imx6_spl.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h index 6fdc438f95..970460d5f2 100644 --- a/include/configs/imx6_spl.h +++ b/include/configs/imx6_spl.h @@ -24,6 +24,7 @@ * and some padding thus 'our' max size is really 0x00908000 - 0x00918000 * or 64KB */ +#define CONFIG_SYS_THUMB_BUILD #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/omap-common/u-boot-spl.lds" #define CONFIG_SPL_TEXT_BASE 0x00908000 #define CONFIG_SPL_MAX_SIZE (64 * 1024) From 5a82e1a21d1229e7e3d1c64187735794019e9a1b Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Thu, 7 Aug 2014 22:57:29 -0700 Subject: [PATCH 33/47] pci: mx6: fix occasional link failures According to the IMX6 reference manuals, REF_SSP_EN (Reference clock enable for SS function) must remain deasserted until the reference clock is running at the appropriate frequency. Without this patch we find a high link failure rate (>5%) on certain IMX6 boards at various temperatures. Signed-off-by: Tim Harvey Acked-by: Marek Vasut Reviewed-by: Fabio Estevam --- drivers/pci/pcie_imx.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/pci/pcie_imx.c b/drivers/pci/pcie_imx.c index c48737e6c9..a3982c4553 100644 --- a/drivers/pci/pcie_imx.c +++ b/drivers/pci/pcie_imx.c @@ -509,10 +509,6 @@ static int imx6_pcie_deassert_core_reset(void) imx6_pcie_toggle_power(); - /* Enable PCIe */ - clrbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_TEST_POWERDOWN); - setbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_REF_SSP_EN); - enable_pcie_clock(); /* @@ -521,6 +517,10 @@ static int imx6_pcie_deassert_core_reset(void) */ mdelay(50); + /* Enable PCIe */ + clrbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_TEST_POWERDOWN); + setbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_REF_SSP_EN); + imx6_pcie_toggle_reset(); return 0; From eb5c18078dfab0bfab5409d365ad3902b18a04c7 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 15 Aug 2014 01:00:48 -0300 Subject: [PATCH 34/47] mx6sxsabresd: Update DDR initialization Use the latest DDR initialization values suggested by the FSL hardware team. While at it, add some comments for clarification. Signed-off-by: Fabio Estevam --- board/freescale/mx6sxsabresd/imximage.cfg | 89 +++++++++++++++-------- 1 file changed, 58 insertions(+), 31 deletions(-) diff --git a/board/freescale/mx6sxsabresd/imximage.cfg b/board/freescale/mx6sxsabresd/imximage.cfg index 406dece0ba..c862617094 100644 --- a/board/freescale/mx6sxsabresd/imximage.cfg +++ b/board/freescale/mx6sxsabresd/imximage.cfg @@ -30,6 +30,7 @@ BOOT_FROM sd * value value to be stored in the register */ +/* Enable all clocks */ DATA 4 0x020c4068 0xffffffff DATA 4 0x020c406c 0xffffffff DATA 4 0x020c4070 0xffffffff @@ -39,46 +40,69 @@ DATA 4 0x020c407c 0xffffffff DATA 4 0x020c4080 0xffffffff DATA 4 0x020c4084 0xffffffff +/* IOMUX - DDR IO Type */ DATA 4 0x020e0618 0x000c0000 DATA 4 0x020e05fc 0x00000000 + +/* Clock */ DATA 4 0x020e032c 0x00000030 -DATA 4 0x020e0300 0x00000030 -DATA 4 0x020e02fc 0x00000030 -DATA 4 0x020e05f4 0x00000030 -DATA 4 0x020e0340 0x00000030 +/* Address */ +DATA 4 0x020e0300 0x00000020 +DATA 4 0x020e02fc 0x00000020 +DATA 4 0x020e05f4 0x00000020 + +/* Control */ +DATA 4 0x020e0340 0x00000020 DATA 4 0x020e0320 0x00000000 -DATA 4 0x020e0310 0x00000030 -DATA 4 0x020e0314 0x00000030 -DATA 4 0x020e0614 0x00000030 +DATA 4 0x020e0310 0x00000020 +DATA 4 0x020e0314 0x00000020 +DATA 4 0x020e0614 0x00000020 +/* Data Strobe */ DATA 4 0x020e05f8 0x00020000 -DATA 4 0x020e0330 0x00000030 -DATA 4 0x020e0334 0x00000030 -DATA 4 0x020e0338 0x00000030 -DATA 4 0x020e033c 0x00000030 +DATA 4 0x020e0330 0x00000028 +DATA 4 0x020e0334 0x00000028 +DATA 4 0x020e0338 0x00000028 +DATA 4 0x020e033c 0x00000028 + +/* Data */ DATA 4 0x020e0608 0x00020000 -DATA 4 0x020e060c 0x00000030 -DATA 4 0x020e0610 0x00000030 -DATA 4 0x020e061c 0x00000030 -DATA 4 0x020e0620 0x00000030 -DATA 4 0x020e02ec 0x00000030 -DATA 4 0x020e02f0 0x00000030 -DATA 4 0x020e02f4 0x00000030 -DATA 4 0x020e02f8 0x00000030 +DATA 4 0x020e060c 0x00000028 +DATA 4 0x020e0610 0x00000028 +DATA 4 0x020e061c 0x00000028 +DATA 4 0x020e0620 0x00000028 +DATA 4 0x020e02ec 0x00000028 +DATA 4 0x020e02f0 0x00000028 +DATA 4 0x020e02f4 0x00000028 +DATA 4 0x020e02f8 0x00000028 + +/* Calibrations - ZQ */ DATA 4 0x021b0800 0xa1390003 -DATA 4 0x021b080c 0x00270025 -DATA 4 0x021b0810 0x001B001E -DATA 4 0x021b083c 0x4144013C -DATA 4 0x021b0840 0x01300128 -DATA 4 0x021b0848 0x4044464A -DATA 4 0x021b0850 0x3A383C34 + +/* Write leveling */ +DATA 4 0x021b080c 0x00290025 +DATA 4 0x021b0810 0x00220022 + +/* DQS Read Gate */ +DATA 4 0x021b083c 0x41480144 +DATA 4 0x021b0840 0x01340130 + +/* Read/Write Delay */ +DATA 4 0x021b0848 0x3C3E4244 +DATA 4 0x021b0850 0x34363638 + +/* Read data bit delay */ DATA 4 0x021b081c 0x33333333 DATA 4 0x021b0820 0x33333333 DATA 4 0x021b0824 0x33333333 DATA 4 0x021b0828 0x33333333 + +/* Complete calibration by forced measurement */ DATA 4 0x021b08b8 0x00000800 + +/* MMDC init - DDR3, 64-bit mode, only MMDC0 is initiated */ DATA 4 0x021b0004 0x0002002d DATA 4 0x021b0008 0x00333030 DATA 4 0x021b000c 0x676b52f3 @@ -90,16 +114,19 @@ DATA 4 0x021b002c 0x000026d2 DATA 4 0x021b0030 0x006b1023 DATA 4 0x021b0040 0x0000005f DATA 4 0x021b0000 0x84190000 + +/* Initialize MT41K256M16HA-125 - MR2 */ DATA 4 0x021b001c 0x04008032 +/* MR3 */ DATA 4 0x021b001c 0x00008033 -DATA 4 0x021b001c 0x00068031 +/* MR1 */ +DATA 4 0x021b001c 0x00048031 +/* MR0 */ DATA 4 0x021b001c 0x05208030 +/* DDR device ZQ calibration */ DATA 4 0x021b001c 0x04008040 + +/* Final DDR setup, before operation start */ DATA 4 0x021b0020 0x00000800 DATA 4 0x021b0818 0x00011117 DATA 4 0x021b001c 0x00000000 - -DATA 4 0x021b083c 0x41400138 -DATA 4 0x021b0840 0x012C011C -DATA 4 0x021b0848 0x3C3C4044 -DATA 4 0x021b0850 0x34343638 From 63b85adcecdd019f049cbbebf10119cea45d3645 Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Thu, 7 Aug 2014 22:35:41 -0700 Subject: [PATCH 35/47] imx: ventana: set dynamic env var for flash layout NAND devices have differing layouts with respect to page size and pages per block. These parameters affect the parameters that need to be passed to mkfs.ubifs and ubinize used to create UBI images. The various NAND chips supported by Gateworks Ventana fall into two different layouts which we refer to as 'normal' and 'large'. This layout is useful when referencing ubi files to download and flash so we create a dynamic env variable for it. Signed-off-by: Tim Harvey --- board/gateworks/gw_ventana/gw_ventana.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index ae1cf8702e..3afb9facd4 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -1263,6 +1263,10 @@ int misc_init_r(void) else if (is_cpu_type(MXC_CPU_MX6DL) || is_cpu_type(MXC_CPU_MX6SOLO)) cputype = "imx6dl"; + if (8 << (ventana_info.nand_flash_size-1) >= 2048) + setenv("flash_layout", "large"); + else + setenv("flash_layout", "normal"); memset(str, 0, sizeof(str)); for (i = 0; i < (sizeof(str)-1) && info->model[i]; i++) str[i] = tolower(info->model[i]); From 2325bb1898fe0d73d1f5252b4547e7c48b7c1b0a Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Thu, 7 Aug 2014 22:35:43 -0700 Subject: [PATCH 36/47] imx: ventana: remove caam disable per eeprom bit During manufacturing this bit is not getting enabled when it should be, so we will ignore it. Signed-off-by: Tim Harvey --- board/gateworks/gw_ventana/gw_ventana.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index 3afb9facd4..42d27092aa 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -1386,7 +1386,7 @@ const char *fdt_aliases[] = { "vpu", "csi0", "csi1", - "caam", + NULL, NULL, NULL, NULL, From e5131d53bfd6d03a2a84f2c8ef0f5977c1b96359 Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Thu, 7 Aug 2014 22:35:44 -0700 Subject: [PATCH 37/47] imx: ventana: add appropriate delay following GSC i2c write The Gateworks System Controller EEPROM config is flash based. Add a delay following writes to avoid errors on back-to-back writes. Signed-off-by: Tim Harvey --- board/gateworks/gw_ventana/gsc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/board/gateworks/gw_ventana/gsc.c b/board/gateworks/gw_ventana/gsc.c index 37966abba9..1cf38d4046 100644 --- a/board/gateworks/gw_ventana/gsc.c +++ b/board/gateworks/gw_ventana/gsc.c @@ -57,7 +57,7 @@ int gsc_i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len) break; mdelay(10); } - mdelay(1); + mdelay(100); return ret; } From b40833d8ee3f95d79f9370200d753a2b82e75e81 Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Thu, 7 Aug 2014 22:35:46 -0700 Subject: [PATCH 38/47] imx: ventana: add video enable gpio pinmux for GW54xx Signed-off-by: Tim Harvey --- board/gateworks/gw_ventana/gw_ventana.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index 42d27092aa..6517b54ea6 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -647,6 +647,8 @@ static iomux_v3_cfg_t const gw54xx_gpio_pads[] = { IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL)), /* PCI_RST# */ IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL)), + /* VID_EN */ + IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL)), }; /* From 49281f4d6d24bddae9106bddde63423d54c41ed4 Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Thu, 7 Aug 2014 22:35:47 -0700 Subject: [PATCH 39/47] imx: ventana: add missing crlf to print Signed-off-by: Tim Harvey --- board/gateworks/gw_ventana/gw_ventana.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index 6517b54ea6..480f093786 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -1341,7 +1341,7 @@ int misc_init_r(void) } if (!gsc_i2c_read(GSC_SC_ADDR, GSC_SC_STATUS, 1, ®, 1)) { if (reg & (1 << GSC_SC_IRQ_WATCHDOG)) { /* watchdog timeout */ - puts("GSC boot watchdog timeout detected"); + puts("GSC boot watchdog timeout detected\n"); reg &= ~(1 << GSC_SC_IRQ_WATCHDOG); /* clear flag */ gsc_i2c_write(GSC_SC_ADDR, GSC_SC_STATUS, 1, ®, 1); } From 2cb6e529d3c63a177e92814b66b5c177b0711ec8 Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Thu, 7 Aug 2014 22:35:48 -0700 Subject: [PATCH 40/47] imx: ventana: configure i2c_dis# pin properly for gw53xx The i2c_dis# pinmux/padconf was missing for the GW53xx (this feature was added to the GW53xx on revB PCB's). Additionally, remove the duplicate config for GW54xx. Signed-off-by: Tim Harvey --- board/gateworks/gw_ventana/gw_ventana.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index 480f093786..81b2c30a97 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -613,6 +613,8 @@ static iomux_v3_cfg_t const gw53xx_gpio_pads[] = { IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL)), /* IOEXP_IRQ# */ IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL)), + /* DIOI2C_DIS# */ + IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL)), /* MX6_LOCLED# */ IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL)), @@ -641,8 +643,6 @@ static iomux_v3_cfg_t const gw54xx_gpio_pads[] = { IOMUX_PADS(PAD_KEY_ROW1__GPIO4_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL)), /* DIOI2C_DIS# */ IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL)), - /* DIOI2C_DIS# */ - IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL)), /* PCICK_SSON */ IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL)), /* PCI_RST# */ From d9d4149296081741d0455440f3fb465dde31f3dd Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Thu, 7 Aug 2014 22:35:49 -0700 Subject: [PATCH 41/47] imx: ventana: enable SION bit on gpio outputs Enable the SION bit on gpio outputs that we wish to be able to read the value of. Signed-off-by: Tim Harvey --- board/gateworks/gw_ventana/gw_ventana.c | 133 +++++++++++++----------- 1 file changed, 70 insertions(+), 63 deletions(-) diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index 81b2c30a97..97d7e3f344 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -78,6 +78,13 @@ DECLARE_GLOBAL_DATA_PTR; PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ PAD_CTL_ODE | PAD_CTL_SRE_FAST) +#define IRQ_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_34ohm | PAD_CTL_HYS | PAD_CTL_SRE_FAST) + +#define DIO_PAD_CFG (MUX_PAD_CTRL(DIO_PAD_CTRL) | MUX_MODE_SION) + + /* * EEPROM board info struct populated by read_eeprom so that we only have to * read it once. @@ -187,7 +194,7 @@ iomux_v3_cfg_t const usdhc3_pads[] = { IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), /* CD */ - IOMUX_PADS(PAD_SD3_DAT5__GPIO7_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_SD3_DAT5__GPIO7_IO00 | MUX_PAD_CTRL(IRQ_PAD_CTRL)), }; /* ENET */ @@ -211,7 +218,7 @@ iomux_v3_cfg_t const enet_pads[] = { IOMUX_PADS(PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL)), /* PHY nRST */ - IOMUX_PADS(PAD_ENET_TXD0__GPIO1_IO30 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_ENET_TXD0__GPIO1_IO30 | DIO_PAD_CFG), }; /* NAND */ @@ -281,10 +288,10 @@ static void setup_iomux_uart(void) #ifdef CONFIG_USB_EHCI_MX6 iomux_v3_cfg_t const usb_pads[] = { - IOMUX_PADS(PAD_GPIO_1__USB_OTG_ID | MUX_PAD_CTRL(DIO_PAD_CTRL)), - IOMUX_PADS(PAD_KEY_COL4__USB_OTG_OC | MUX_PAD_CTRL(DIO_PAD_CTRL)), + IOMUX_PADS(PAD_GPIO_1__USB_OTG_ID | DIO_PAD_CFG), + IOMUX_PADS(PAD_KEY_COL4__USB_OTG_OC | DIO_PAD_CFG), /* OTG PWR */ - IOMUX_PADS(PAD_EIM_D22__GPIO3_IO22 | MUX_PAD_CTRL(DIO_PAD_CTRL)), + IOMUX_PADS(PAD_EIM_D22__GPIO3_IO22 | DIO_PAD_CFG), }; int board_ehci_hcd_init(int port) @@ -296,15 +303,13 @@ int board_ehci_hcd_init(int port) /* Reset USB HUB (present on GW54xx/GW53xx) */ switch (info->model[3]) { case '3': /* GW53xx */ - SETUP_IOMUX_PAD(PAD_GPIO_9__GPIO1_IO09 | - MUX_PAD_CTRL(NO_PAD_CTRL)); + SETUP_IOMUX_PAD(PAD_GPIO_9__GPIO1_IO09 | DIO_PAD_CFG); gpio_direction_output(IMX_GPIO_NR(1, 9), 0); mdelay(2); gpio_set_value(IMX_GPIO_NR(1, 9), 1); break; case '4': /* GW54xx */ - SETUP_IOMUX_PAD(PAD_SD1_DAT0__GPIO1_IO16 | - MUX_PAD_CTRL(NO_PAD_CTRL)); + SETUP_IOMUX_PAD(PAD_SD1_DAT0__GPIO1_IO16 | DIO_PAD_CFG); gpio_direction_output(IMX_GPIO_NR(1, 16), 0); mdelay(2); gpio_set_value(IMX_GPIO_NR(1, 16), 1); @@ -426,7 +431,7 @@ static void enable_lvds(struct display_info_t const *dev) writel(reg, &iomux->gpr[2]); /* Enable Backlight */ - SETUP_IOMUX_PAD(PAD_SD1_CMD__GPIO1_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL)); + SETUP_IOMUX_PAD(PAD_SD1_CMD__GPIO1_IO18 | DIO_PAD_CFG); gpio_direction_output(IMX_GPIO_NR(1, 18), 1); } @@ -523,7 +528,7 @@ static void setup_display(void) writel(reg, &iomux->gpr[3]); /* Backlight CABEN on LVDS connector */ - SETUP_IOMUX_PAD(PAD_SD2_CLK__GPIO1_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL)); + SETUP_IOMUX_PAD(PAD_SD2_CLK__GPIO1_IO10 | DIO_PAD_CFG); gpio_direction_output(IMX_GPIO_NR(1, 10), 0); } #endif /* CONFIG_VIDEO_IPUV3 */ @@ -535,120 +540,120 @@ static void setup_display(void) /* common to add baseboards */ static iomux_v3_cfg_t const gw_gpio_pads[] = { /* MSATA_EN */ - IOMUX_PADS(PAD_SD4_DAT0__GPIO2_IO08 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_SD4_DAT0__GPIO2_IO08 | DIO_PAD_CFG), /* RS232_EN# */ - IOMUX_PADS(PAD_SD4_DAT3__GPIO2_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_SD4_DAT3__GPIO2_IO11 | DIO_PAD_CFG), }; /* prototype */ static iomux_v3_cfg_t const gwproto_gpio_pads[] = { /* PANLEDG# */ - IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG), /* PANLEDR# */ - IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG), /* LOCLED# */ - IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG), /* RS485_EN */ - IOMUX_PADS(PAD_SD3_DAT4__GPIO7_IO01 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_SD3_DAT4__GPIO7_IO01 | DIO_PAD_CFG), /* IOEXP_PWREN# */ - IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | DIO_PAD_CFG), /* IOEXP_IRQ# */ - IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(IRQ_PAD_CTRL)), /* VID_EN */ - IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | DIO_PAD_CFG), /* DIOI2C_DIS# */ - IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | DIO_PAD_CFG), /* PCICK_SSON */ - IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20 | DIO_PAD_CFG), /* PCI_RST# */ - IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | DIO_PAD_CFG), }; static iomux_v3_cfg_t const gw51xx_gpio_pads[] = { /* PANLEDG# */ - IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG), /* PANLEDR# */ - IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG), /* IOEXP_PWREN# */ - IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | DIO_PAD_CFG), /* IOEXP_IRQ# */ - IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(IRQ_PAD_CTRL)), /* GPS_SHDN */ - IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02 | DIO_PAD_CFG), /* VID_PWR */ - IOMUX_PADS(PAD_CSI0_DATA_EN__GPIO5_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_CSI0_DATA_EN__GPIO5_IO20 | DIO_PAD_CFG), /* PCI_RST# */ - IOMUX_PADS(PAD_GPIO_0__GPIO1_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_GPIO_0__GPIO1_IO00 | DIO_PAD_CFG), }; static iomux_v3_cfg_t const gw52xx_gpio_pads[] = { /* PANLEDG# */ - IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG), /* PANLEDR# */ - IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG), /* IOEXP_PWREN# */ - IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | DIO_PAD_CFG), /* IOEXP_IRQ# */ - IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(IRQ_PAD_CTRL)), /* MX6_LOCLED# */ - IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG), /* GPS_SHDN */ - IOMUX_PADS(PAD_ENET_RXD0__GPIO1_IO27 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_ENET_RXD0__GPIO1_IO27 | DIO_PAD_CFG), /* USBOTG_SEL */ - IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02 | DIO_PAD_CFG), /* VID_PWR */ - IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | DIO_PAD_CFG), /* PCI_RST# */ - IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | DIO_PAD_CFG), }; static iomux_v3_cfg_t const gw53xx_gpio_pads[] = { /* PANLEDG# */ - IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG), /* PANLEDR# */ - IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG), /* IOEXP_PWREN# */ - IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | DIO_PAD_CFG), /* IOEXP_IRQ# */ - IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(IRQ_PAD_CTRL)), /* DIOI2C_DIS# */ - IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | DIO_PAD_CFG), /* MX6_LOCLED# */ - IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG), /* GPS_SHDN */ - IOMUX_PADS(PAD_ENET_RXD0__GPIO1_IO27 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_ENET_RXD0__GPIO1_IO27 | DIO_PAD_CFG), /* VID_EN */ - IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | DIO_PAD_CFG), /* PCI_RST# */ - IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | DIO_PAD_CFG), }; static iomux_v3_cfg_t const gw54xx_gpio_pads[] = { /* PANLEDG# */ - IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG), /* PANLEDR# */ - IOMUX_PADS(PAD_KEY_COL2__GPIO4_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_KEY_COL2__GPIO4_IO10 | DIO_PAD_CFG), /* MX6_LOCLED# */ - IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG), /* MIPI_DIO */ - IOMUX_PADS(PAD_SD1_DAT3__GPIO1_IO21 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_SD1_DAT3__GPIO1_IO21 | DIO_PAD_CFG), /* RS485_EN */ - IOMUX_PADS(PAD_EIM_D24__GPIO3_IO24 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_EIM_D24__GPIO3_IO24 | DIO_PAD_CFG), /* IOEXP_PWREN# */ - IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG), /* IOEXP_IRQ# */ - IOMUX_PADS(PAD_KEY_ROW1__GPIO4_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_KEY_ROW1__GPIO4_IO09 | MUX_PAD_CTRL(IRQ_PAD_CTRL)), /* DIOI2C_DIS# */ - IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | DIO_PAD_CFG), /* PCICK_SSON */ - IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20 | DIO_PAD_CFG), /* PCI_RST# */ - IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | DIO_PAD_CFG), /* VID_EN */ - IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | DIO_PAD_CFG), }; /* @@ -1024,15 +1029,17 @@ static void setup_board_gpio(int board) */ for (i = 0; i < 4; i++) { struct dio_cfg *cfg = &gpio_cfg[board].dio_cfg[i]; - unsigned ctrl = DIO_PAD_CTRL; + iomux_v3_cfg_t ctrl = DIO_PAD_CFG; unsigned cputype = is_cpu_type(MXC_CPU_MX6Q) ? 0 : 1; sprintf(arg, "dio%d", i); if (!hwconfig(arg)) continue; s = hwconfig_subarg(arg, "padctrl", &len); - if (s) - ctrl = simple_strtoul(s, NULL, 16) & 0x3ffff; + if (s) { + ctrl = MUX_PAD_CTRL(simple_strtoul(s, NULL, 16) + & 0x1ffff) | MUX_MODE_SION; + } if (hwconfig_subarg_cmp(arg, "mode", "gpio")) { if (!quiet) { printf("DIO%d: GPIO%d_IO%02d (gpio-%d)\n", i, @@ -1041,7 +1048,7 @@ static void setup_board_gpio(int board) cfg->gpio_param); } imx_iomux_v3_setup_pad(cfg->gpio_padmux[cputype] | - MUX_PAD_CTRL(ctrl)); + ctrl); gpio_direction_input(cfg->gpio_param); } else if (hwconfig_subarg_cmp("dio2", "mode", "pwm") && cfg->pwm_padmux) { From 6a165904ac31930cf25d954aa8b845c33b001d1b Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Thu, 7 Aug 2014 22:35:50 -0700 Subject: [PATCH 42/47] imx: ventana: add iomux for PCISKT_WDIS# gpio The PCISKT_WDIS# gpio allows for asserting WDIS# going to the various PCIe sockets on the Ventana board. Signed-off-by: Tim Harvey --- board/gateworks/gw_ventana/gw_ventana.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index 97d7e3f344..67a646c059 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -585,6 +585,8 @@ static iomux_v3_cfg_t const gw51xx_gpio_pads[] = { IOMUX_PADS(PAD_CSI0_DATA_EN__GPIO5_IO20 | DIO_PAD_CFG), /* PCI_RST# */ IOMUX_PADS(PAD_GPIO_0__GPIO1_IO00 | DIO_PAD_CFG), + /* PCIESKT_WDIS# */ + IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | DIO_PAD_CFG), }; static iomux_v3_cfg_t const gw52xx_gpio_pads[] = { @@ -607,6 +609,8 @@ static iomux_v3_cfg_t const gw52xx_gpio_pads[] = { IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | DIO_PAD_CFG), /* PCI_RST# */ IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | DIO_PAD_CFG), + /* PCIESKT_WDIS# */ + IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | DIO_PAD_CFG), }; static iomux_v3_cfg_t const gw53xx_gpio_pads[] = { @@ -629,6 +633,8 @@ static iomux_v3_cfg_t const gw53xx_gpio_pads[] = { IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | DIO_PAD_CFG), /* PCI_RST# */ IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | DIO_PAD_CFG), + /* PCIESKT_WDIS# */ + IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | DIO_PAD_CFG), }; static iomux_v3_cfg_t const gw54xx_gpio_pads[] = { @@ -654,6 +660,8 @@ static iomux_v3_cfg_t const gw54xx_gpio_pads[] = { IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | DIO_PAD_CFG), /* VID_EN */ IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | DIO_PAD_CFG), + /* PCIESKT_WDIS# */ + IOMUX_PADS(PAD_DISP0_DAT23__GPIO5_IO17 | DIO_PAD_CFG), }; /* @@ -684,6 +692,7 @@ struct ventana { int dioi2c_en; int pcie_sson; int usb_sel; + int wdis; }; struct ventana gpio_cfg[] = { @@ -769,6 +778,7 @@ struct ventana gpio_cfg[] = { .mezz_irq = IMX_GPIO_NR(2, 18), .gps_shdn = IMX_GPIO_NR(1, 2), .vidin_en = IMX_GPIO_NR(5, 20), + .wdis = IMX_GPIO_NR(7, 12), }, /* GW52xx */ @@ -812,6 +822,7 @@ struct ventana gpio_cfg[] = { .gps_shdn = IMX_GPIO_NR(1, 27), .vidin_en = IMX_GPIO_NR(3, 31), .usb_sel = IMX_GPIO_NR(1, 2), + .wdis = IMX_GPIO_NR(7, 12), }, /* GW53xx */ @@ -854,6 +865,7 @@ struct ventana gpio_cfg[] = { .mezz_irq = IMX_GPIO_NR(2, 18), .gps_shdn = IMX_GPIO_NR(1, 27), .vidin_en = IMX_GPIO_NR(3, 31), + .wdis = IMX_GPIO_NR(7, 12), }, /* GW54xx */ @@ -898,6 +910,7 @@ struct ventana gpio_cfg[] = { .vidin_en = IMX_GPIO_NR(3, 31), .dioi2c_en = IMX_GPIO_NR(4, 5), .pcie_sson = IMX_GPIO_NR(1, 20), + .wdis = IMX_GPIO_NR(5, 17), }, }; @@ -1023,6 +1036,10 @@ static void setup_board_gpio(int board) if (gpio_cfg[board].usb_sel) gpio_direction_output(gpio_cfg[board].usb_sel, 0); + /* PCISKT_WDIS# (Wireless disable GPIO to miniPCIe sockets) */ + if (gpio_cfg[board].wdis) + gpio_direction_output(gpio_cfg[board].wdis, 1); + /* * Configure DIO pinmux/padctl registers * see IMX6DQRM/IMX6SDLRM IOMUXC_SW_PAD_CTL_PAD_* register definitions From 6a9032112e1bca8bab974b5da9a03b37d49538a6 Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Thu, 7 Aug 2014 22:35:51 -0700 Subject: [PATCH 43/47] imx: ventana: leave PCI reset de-asserted if PCI enabled Signed-off-by: Tim Harvey --- board/gateworks/gw_ventana/gw_ventana.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index 67a646c059..2915b9057f 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -995,12 +995,10 @@ static void setup_board_gpio(int board) gpio_direction_output(GP_MSATA_SEL, 0); } - /* - * assert PCI_RST# (released by OS when clock is valid) - * TODO: figure out why leaving this de-asserted from PCI scan on boot - * causes linux pcie driver to hang during enumeration - */ +#if !defined(CONFIG_CMD_PCI) + /* assert PCI_RST# (released by OS when clock is valid) */ gpio_direction_output(gpio_cfg[board].pcie_rst, 0); +#endif /* turn off (active-high) user LED's */ for (i = 0; i < 4; i++) { From 9c0fe83eb58ed9cb9faa17646719240abe55f4bf Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Thu, 7 Aug 2014 22:35:45 -0700 Subject: [PATCH 44/47] imx: ventana: add econfig command The Gateworks Ventana EEPROM contains a set of configuration bits that affect the removal of device-tree nodes that support peripherals that do not exist on sub-loaded boards. This patch adds: - a structure to define a config bit name, dt node alias, bit position - an array of supported configuration items - an econfig command to get/set/list configuration bits - use of the array when adjusting the FDT prior to boot Signed-off-by: Tim Harvey --- board/gateworks/gw_ventana/eeprom.c | 168 +++++++++++++++++++- board/gateworks/gw_ventana/gw_ventana.c | 100 +++--------- board/gateworks/gw_ventana/ventana_eeprom.h | 11 ++ include/configs/gw_ventana.h | 5 +- 4 files changed, 198 insertions(+), 86 deletions(-) diff --git a/board/gateworks/gw_ventana/eeprom.c b/board/gateworks/gw_ventana/eeprom.c index e90186ebe8..3edc9151d9 100644 --- a/board/gateworks/gw_ventana/eeprom.c +++ b/board/gateworks/gw_ventana/eeprom.c @@ -6,7 +6,10 @@ */ #include +#include #include +#include +#include #include "gsc.h" #include "ventana_eeprom.h" @@ -38,14 +41,12 @@ read_eeprom(int bus, struct ventana_board_info *info) /* read eeprom config section */ if (gsc_i2c_read(GSC_EEPROM_ADDR, 0x00, 1, buf, sizeof(*info))) { puts("EEPROM: Failed to read EEPROM\n"); - info->model[0] = 0; return GW_UNKNOWN; } /* sanity checks */ if (info->model[0] != 'G' || info->model[1] != 'W') { puts("EEPROM: Invalid Model in EEPROM\n"); - info->model[0] = 0; return GW_UNKNOWN; } @@ -55,7 +56,6 @@ read_eeprom(int bus, struct ventana_board_info *info) if ((info->chksum[0] != chksum>>8) || (info->chksum[1] != (chksum&0xff))) { puts("EEPROM: Failed EEPROM checksum\n"); - info->model[0] = 0; return GW_UNKNOWN; } @@ -87,3 +87,165 @@ read_eeprom(int bus, struct ventana_board_info *info) } return type; } + +/* list of config bits that the bootloader will remove from dtb if not set */ +struct ventana_eeprom_config econfig[] = { + { "eth0", "ethernet0", EECONFIG_ETH0 }, + { "eth1", "ethernet1", EECONFIG_ETH1 }, + { "sata", "ahci0", EECONFIG_SATA }, + { "pcie", NULL, EECONFIG_PCIE}, + { "lvds0", NULL, EECONFIG_LVDS0 }, + { "lvds1", NULL, EECONFIG_LVDS1 }, + { "usb0", NULL, EECONFIG_USB0 }, + { "usb1", NULL, EECONFIG_USB1 }, + { "mmc0", NULL, EECONFIG_SD0 }, + { "mmc1", NULL, EECONFIG_SD1 }, + { "mmc2", NULL, EECONFIG_SD2 }, + { "mmc3", NULL, EECONFIG_SD3 }, + { "uart0", NULL, EECONFIG_UART0 }, + { "uart1", NULL, EECONFIG_UART1 }, + { "uart2", NULL, EECONFIG_UART2 }, + { "uart3", NULL, EECONFIG_UART3 }, + { "uart4", NULL, EECONFIG_UART4 }, + { "ipu0", NULL, EECONFIG_IPU0 }, + { "ipu1", NULL, EECONFIG_IPU1 }, + { "can0", NULL, EECONFIG_FLEXCAN }, + { "i2c0", NULL, EECONFIG_I2C0 }, + { "i2c1", NULL, EECONFIG_I2C1 }, + { "i2c2", NULL, EECONFIG_I2C2 }, + { "vpu", NULL, EECONFIG_VPU }, + { "csi0", NULL, EECONFIG_CSI0 }, + { "csi1", NULL, EECONFIG_CSI1 }, + { "spi0", NULL, EECONFIG_ESPCI0 }, + { "spi1", NULL, EECONFIG_ESPCI1 }, + { "spi2", NULL, EECONFIG_ESPCI2 }, + { "spi3", NULL, EECONFIG_ESPCI3 }, + { "spi4", NULL, EECONFIG_ESPCI4 }, + { "spi5", NULL, EECONFIG_ESPCI5 }, + { "gps", "pps", EECONFIG_GPS }, + { "hdmi_in", NULL, EECONFIG_HDMI_IN }, + { "hdmi_out", NULL, EECONFIG_HDMI_OUT }, + { "cvbs_in", NULL, EECONFIG_VID_IN }, + { "cvbs_out", NULL, EECONFIG_VID_OUT }, + { "nand", NULL, EECONFIG_NAND }, + { /* Sentinel */ } +}; + +#ifdef CONFIG_CMD_EECONFIG +static struct ventana_eeprom_config *get_config(const char *name) +{ + struct ventana_eeprom_config *cfg = econfig; + + while (cfg->name) { + if (0 == strcmp(name, cfg->name)) + return cfg; + cfg++; + } + return NULL; +} + +static u8 econfig_bytes[sizeof(ventana_info.config)]; +static int econfig_init = -1; + +int do_econfig(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + struct ventana_eeprom_config *cfg; + struct ventana_board_info *info = &ventana_info; + int i; + + if (argc < 2) + return CMD_RET_USAGE; + + /* initialize */ + if (econfig_init != 1) { + memcpy(econfig_bytes, info->config, sizeof(econfig_bytes)); + econfig_init = 1; + } + + /* list configs */ + if ((strncmp(argv[1], "list", 4) == 0)) { + cfg = econfig; + while (cfg->name) { + printf("%s: %d\n", cfg->name, + test_bit(cfg->bit, econfig_bytes) ? 1 : 0); + cfg++; + } + } + + /* save */ + else if ((strncmp(argv[1], "save", 4) == 0)) { + unsigned char *buf = (unsigned char *)info; + int chksum; + + /* calculate new checksum */ + memcpy(info->config, econfig_bytes, sizeof(econfig_bytes)); + for (chksum = 0, i = 0; i < sizeof(*info)-2; i++) + chksum += buf[i]; + debug("old chksum:0x%04x\n", + (info->chksum[0] << 8) | info->chksum[1]); + debug("new chksum:0x%04x\n", chksum); + info->chksum[0] = chksum >> 8; + info->chksum[1] = chksum & 0xff; + + /* write new config data */ + if (gsc_i2c_write(GSC_EEPROM_ADDR, info->config - (u8 *)info, + 1, econfig_bytes, sizeof(econfig_bytes))) { + printf("EEPROM: Failed updating config\n"); + return CMD_RET_FAILURE; + } + + /* write new config data */ + if (gsc_i2c_write(GSC_EEPROM_ADDR, info->chksum - (u8 *)info, + 1, info->chksum, 2)) { + printf("EEPROM: Failed updating checksum\n"); + return CMD_RET_FAILURE; + } + + printf("Config saved to EEPROM\n"); + } + + /* get config */ + else if (argc == 2) { + cfg = get_config(argv[1]); + if (cfg) { + printf("%s: %d\n", cfg->name, + test_bit(cfg->bit, econfig_bytes) ? 1 : 0); + } else { + printf("invalid config: %s\n", argv[1]); + return CMD_RET_FAILURE; + } + } + + /* set config */ + else if (argc == 3) { + cfg = get_config(argv[1]); + if (cfg) { + if (simple_strtol(argv[2], NULL, 10)) { + test_and_set_bit(cfg->bit, econfig_bytes); + printf("Enabled %s\n", cfg->name); + } else { + test_and_clear_bit(cfg->bit, econfig_bytes); + printf("Disabled %s\n", cfg->name); + } + } else { + printf("invalid config: %s\n", argv[1]); + return CMD_RET_FAILURE; + } + } + + else + return CMD_RET_USAGE; + + return CMD_RET_SUCCESS; +} + +U_BOOT_CMD( + econfig, 3, 0, do_econfig, + "EEPROM configuration", + "list - list config\n" + "save - save config to EEPROM\n" + " - get config 'name'\n" + " [0|1] - set config 'name' to value\n" +); + +#endif /* CONFIG_CMD_EECONFIG */ diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index 2915b9057f..a222921978 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -50,10 +50,6 @@ DECLARE_GLOBAL_DATA_PTR; #define GP_RS232_EN IMX_GPIO_NR(2, 11) #define GP_MSATA_SEL IMX_GPIO_NR(2, 8) -/* I2C bus numbers */ -#define I2C_GSC 0 -#define I2C_PMIC 1 - #define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) @@ -89,7 +85,7 @@ DECLARE_GLOBAL_DATA_PTR; * EEPROM board info struct populated by read_eeprom so that we only have to * read it once. */ -static struct ventana_board_info ventana_info; +struct ventana_board_info ventana_info; int board_type; @@ -922,7 +918,7 @@ int power_init_board(void) /* configure PFUZE100 PMIC */ if (board_type == GW54xx || board_type == GW54proto) { - power_pfuze100_init(I2C_PMIC); + power_pfuze100_init(CONFIG_I2C_PMIC); p = pmic_get("PFUZE100"); if (p && !pmic_probe(p)) { pmic_reg_read(p, PFUZE100_DEVICEID, ®); @@ -944,7 +940,7 @@ int power_init_board(void) /* configure LTC3676 PMIC */ else { - power_ltc3676_init(I2C_PMIC); + power_ltc3676_init(CONFIG_I2C_PMIC); p = pmic_get("LTC3676_PMIC"); if (p && !pmic_probe(p)) { puts("PMIC: LTC3676\n"); @@ -1175,7 +1171,7 @@ int board_init(void) setup_sata(); #endif /* read Gateworks EEPROM into global struct (used later) */ - board_type = read_eeprom(I2C_GSC, &ventana_info); + board_type = read_eeprom(CONFIG_I2C_GSC, &ventana_info); /* board-specifc GPIO iomux */ SETUP_IOMUX_PADS(gw_gpio_pads); @@ -1223,7 +1219,7 @@ int checkboard(void) return 0; /* Display GSC firmware revision/CRC/status */ - i2c_set_bus_num(I2C_GSC); + i2c_set_bus_num(CONFIG_I2C_GSC); if (!gsc_i2c_read(GSC_SC_ADDR, GSC_SC_FWVER, 1, buf, 1)) { printf("GSC: v%d", buf[0]); if (!gsc_i2c_read(GSC_SC_ADDR, GSC_SC_STATUS, 1, buf, 4)) { @@ -1353,7 +1349,7 @@ int misc_init_r(void) * * Disable the boot watchdog and display/clear the timeout flag if set */ - i2c_set_bus_num(I2C_GSC); + i2c_set_bus_num(CONFIG_I2C_GSC); if (!gsc_i2c_read(GSC_SC_ADDR, GSC_SC_CTRL1, 1, ®, 1)) { reg |= (1 << GSC_SC_CTRL1_WDDIS); if (gsc_i2c_write(GSC_SC_ADDR, GSC_SC_CTRL1, 1, ®, 1)) @@ -1374,74 +1370,6 @@ int misc_init_r(void) #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -/* FDT aliases associated with EEPROM config bits */ -const char *fdt_aliases[] = { - "ethernet0", - "ethernet1", - "hdmi_out", - "ahci0", - "pcie", - "ssi0", - "ssi1", - "lcd0", - "lvds0", - "lvds1", - "usb0", - "usb1", - "mmc0", - "mmc1", - "mmc2", - "mmc3", - "uart0", - "uart1", - "uart2", - "uart3", - "uart4", - "ipu0", - "ipu1", - "can0", - "mipi_dsi", - "mipi_csi", - "tzasc0", - "tzasc1", - "i2c0", - "i2c1", - "i2c2", - "vpu", - "csi0", - "csi1", - NULL, - NULL, - NULL, - NULL, - NULL, - NULL, - "spi0", - "spi1", - "spi2", - "spi3", - "spi4", - "spi5", - NULL, - NULL, - "pps", - NULL, - NULL, - NULL, - "hdmi_in", - "cvbs_out", - "cvbs_in", - "nand", - NULL, - NULL, - NULL, - NULL, - NULL, - NULL, - NULL, - NULL, -}; - /* * called prior to booting kernel or by 'fdt boardsetup' command * @@ -1453,8 +1381,8 @@ const char *fdt_aliases[] = { */ void ft_board_setup(void *blob, bd_t *bd) { - int bit; struct ventana_board_info *info = &ventana_info; + struct ventana_eeprom_config *cfg; struct node_info nodes[] = { { "sst,w25q256", MTD_DEV_TYPE_NOR, }, /* SPI flash */ { "fsl,imx6q-gpmi-nand", MTD_DEV_TYPE_NAND, }, /* NAND flash */ @@ -1489,9 +1417,17 @@ void ft_board_setup(void *blob, bd_t *bd) * remove nodes by alias path if EEPROM config tells us the * peripheral is not loaded on the board. */ - for (bit = 0; bit < 64; bit++) { - if (!test_bit(bit, info->config)) - fdt_del_node_and_alias(blob, fdt_aliases[bit]); + if (getenv("fdt_noconfig")) { + puts(" Skiping periperhal config (fdt_noconfig defined)\n"); + return; + } + cfg = econfig; + while (cfg->name) { + if (!test_bit(cfg->bit, info->config)) { + fdt_del_node_and_alias(blob, cfg->dtalias ? + cfg->dtalias : cfg->name); + } + cfg++; } } #endif /* defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/gateworks/gw_ventana/ventana_eeprom.h b/board/gateworks/gw_ventana/ventana_eeprom.h index 5b065bea4e..d64b9107c6 100644 --- a/board/gateworks/gw_ventana/ventana_eeprom.h +++ b/board/gateworks/gw_ventana/ventana_eeprom.h @@ -110,8 +110,19 @@ enum { GW53xx, GW54xx, GW_UNKNOWN, + GW_BADCRC, }; +/* config items */ +struct ventana_eeprom_config { + const char *name; /* name of item */ + const char *dtalias; /* name of dt node to remove if not set */ + int bit; /* bit within config */ +}; + +extern struct ventana_eeprom_config econfig[]; +extern struct ventana_board_info ventana_info; + int read_eeprom(int bus, struct ventana_board_info *); #endif diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index 8197a72674..b991b093cb 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -95,7 +95,9 @@ #define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_I2C_GSC 0 +#define CONFIG_I2C_PMIC 1 /* MMC Configs */ #define CONFIG_FSL_ESDHC @@ -164,6 +166,7 @@ #define CONFIG_CMD_SETEXPR #define CONFIG_CMD_BOOTZ #define CONFIG_CMD_GSC +#define CONFIG_CMD_EECONFIG /* Gateworks EEPROM config cmd */ #define CONFIG_CMD_UBI #define CONFIG_RBTREE #define CONFIG_LZO From 080d72f233e9176942f993d206ec60e9813fbc51 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 14 Aug 2014 21:00:28 -0300 Subject: [PATCH 45/47] mx6sxsabresd: Convert to the new Kconfig style mx6sxsabresd was not in the master branch when the conversion to the new Kconfig style happened, so convert it now so that it can build again. Signed-off-by: Fabio Estevam --- arch/arm/Kconfig | 4 ++++ board/freescale/mx6sxsabresd/Kconfig | 23 +++++++++++++++++++++++ board/freescale/mx6sxsabresd/MAINTAINERS | 6 ++++++ configs/mx6sxsabresd_defconfig | 3 +++ 4 files changed, 36 insertions(+) create mode 100644 board/freescale/mx6sxsabresd/Kconfig create mode 100644 board/freescale/mx6sxsabresd/MAINTAINERS create mode 100644 configs/mx6sxsabresd_defconfig diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 63f8576aa3..f01ff8fd29 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -527,6 +527,9 @@ config TARGET_MX6SABRESD config TARGET_MX6SLEVK bool "Support mx6slevk" +config TARGET_MX6SXSABRESD + bool "Support mx6sxsabresd" + config TARGET_GW_VENTANA bool "Support gw_ventana" @@ -884,6 +887,7 @@ source "board/freescale/mx6qarm2/Kconfig" source "board/freescale/mx6qsabreauto/Kconfig" source "board/freescale/mx6sabresd/Kconfig" source "board/freescale/mx6slevk/Kconfig" +source "board/freescale/mx6sxsabresd/Kconfig" source "board/freescale/vf610twr/Kconfig" source "board/gateworks/gw_ventana/Kconfig" source "board/genesi/mx51_efikamx/Kconfig" diff --git a/board/freescale/mx6sxsabresd/Kconfig b/board/freescale/mx6sxsabresd/Kconfig new file mode 100644 index 0000000000..ee8f4a63ef --- /dev/null +++ b/board/freescale/mx6sxsabresd/Kconfig @@ -0,0 +1,23 @@ +if TARGET_MX6SXSABRESD + +config SYS_CPU + string + default "armv7" + +config SYS_BOARD + string + default "mx6sxsabresd" + +config SYS_VENDOR + string + default "freescale" + +config SYS_SOC + string + default "mx6" + +config SYS_CONFIG_NAME + string + default "mx6sxsabresd" + +endif diff --git a/board/freescale/mx6sxsabresd/MAINTAINERS b/board/freescale/mx6sxsabresd/MAINTAINERS new file mode 100644 index 0000000000..f52f300bed --- /dev/null +++ b/board/freescale/mx6sxsabresd/MAINTAINERS @@ -0,0 +1,6 @@ +MX6SXSABRESD BOARD +M: Fabio Estevam +S: Maintained +F: board/freescale/mx6sxsabresd/ +F: include/configs/mx6sxsabresd.h +F: configs/mx6sxsabresd_defconfig diff --git a/configs/mx6sxsabresd_defconfig b/configs/mx6sxsabresd_defconfig new file mode 100644 index 0000000000..f23d48f361 --- /dev/null +++ b/configs/mx6sxsabresd_defconfig @@ -0,0 +1,3 @@ +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sxsabresd/imximage.cfg,MX6SX" +CONFIG_ARM=y +CONFIG_TARGET_MX6SXSABRESD=y From 5c045cddaa2411aba856bad5245ee0e0654569c2 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 15 Aug 2014 00:24:30 -0300 Subject: [PATCH 46/47] mx6sx: Adjust enable_fec_anatop_clock() for mx6solox Configure and enable the ethernet clock for mx6solox. Signed-off-by: Fabio Estevam --- arch/arm/cpu/armv7/mx6/clock.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c index abd9d619dc..820b8d5154 100644 --- a/arch/arm/cpu/armv7/mx6/clock.c +++ b/arch/arm/cpu/armv7/mx6/clock.c @@ -373,6 +373,27 @@ int enable_fec_anatop_clock(enum enet_freq freq) reg &= ~BM_ANADIG_PLL_ENET_BYPASS; writel(reg, &anatop->pll_enet); +#ifdef CONFIG_MX6SX + /* + * Set enet ahb clock to 200MHz + * pll2_pfd2_396m-> ENET_PODF-> ENET_AHB + */ + reg = readl(&imx_ccm->chsccdr); + reg &= ~(MXC_CCM_CHSCCDR_ENET_PRE_CLK_SEL_MASK + | MXC_CCM_CHSCCDR_ENET_PODF_MASK + | MXC_CCM_CHSCCDR_ENET_CLK_SEL_MASK); + /* PLL2 PFD2 */ + reg |= (4 << MXC_CCM_CHSCCDR_ENET_PRE_CLK_SEL_OFFSET); + /* Div = 2*/ + reg |= (1 << MXC_CCM_CHSCCDR_ENET_PODF_OFFSET); + reg |= (0 << MXC_CCM_CHSCCDR_ENET_CLK_SEL_OFFSET); + writel(reg, &imx_ccm->chsccdr); + + /* Enable enet system clock */ + reg = readl(&imx_ccm->CCGR3); + reg |= MXC_CCM_CCGR3_ENET_MASK; + writel(reg, &imx_ccm->CCGR3); +#endif return 0; } #endif From d145878d59c80a44d8c6e6d606b898ab87d205ee Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 15 Aug 2014 00:24:29 -0300 Subject: [PATCH 47/47] mx6sxsabresd: Add Ethernet support mx6sxsabresd board has 2 FEC ports, each one connected to a AR8031. Add support for one FEC port initially. Signed-off-by: Fabio Estevam --- arch/arm/include/asm/arch-mx6/crm_regs.h | 1 + arch/arm/include/asm/arch-mx6/iomux.h | 10 ++ board/freescale/mx6sxsabresd/mx6sxsabresd.c | 116 ++++++++++++++++++++ include/configs/mx6sxsabresd.h | 17 +++ 4 files changed, 144 insertions(+) diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h index 9a7fb34f03..e67b5b9e7d 100644 --- a/arch/arm/include/asm/arch-mx6/crm_regs.h +++ b/arch/arm/include/asm/arch-mx6/crm_regs.h @@ -981,6 +981,7 @@ struct mxc_ccm_reg { #define BM_ANADIG_PLL_ENET_RSVD1 0x7FE00000 #define BF_ANADIG_PLL_ENET_RSVD1(v) \ (((v) << 21) & BM_ANADIG_PLL_ENET_RSVD1) +#define BM_ANADIG_PLL_ENET_REF_25M_ENABLE 0x00200000 #define BM_ANADIG_PLL_ENET_ENABLE_SATA 0x00100000 #define BM_ANADIG_PLL_ENET_ENABLE_PCIE 0x00080000 #define BM_ANADIG_PLL_ENET_PFD_OFFSET_EN 0x00040000 diff --git a/arch/arm/include/asm/arch-mx6/iomux.h b/arch/arm/include/asm/arch-mx6/iomux.h index 6a4a632199..f54db6944d 100644 --- a/arch/arm/include/asm/arch-mx6/iomux.h +++ b/arch/arm/include/asm/arch-mx6/iomux.h @@ -65,6 +65,16 @@ #define IOMUX_GPR1_FEC_MASK (IOMUX_GPR1_FEC_CLOCK_MUX1_SEL_MASK \ | IOMUX_GPR1_FEC_CLOCK_MUX2_SEL_MASK) +#define IOMUX_GPR1_FEC1_CLOCK_MUX1_SEL_MASK (0x1 << 17) +#define IOMUX_GPR1_FEC1_CLOCK_MUX2_SEL_MASK (0x1 << 13) +#define IOMUX_GPR1_FEC1_MASK (IOMUX_GPR1_FEC1_CLOCK_MUX1_SEL_MASK \ + | IOMUX_GPR1_FEC1_CLOCK_MUX2_SEL_MASK) + +#define IOMUX_GPR1_FEC2_CLOCK_MUX1_SEL_MASK (0x1 << 18) +#define IOMUX_GPR1_FEC2_CLOCK_MUX2_SEL_MASK (0x1 << 14) +#define IOMUX_GPR1_FEC2_MASK (IOMUX_GPR1_FEC2_CLOCK_MUX1_SEL_MASK \ + | IOMUX_GPR1_FEC2_CLOCK_MUX2_SEL_MASK) + #define IOMUXC_GPR13_SATA_PHY_8_RXEQ_0P5DB (0<<24) #define IOMUXC_GPR13_SATA_PHY_8_RXEQ_1P0DB (1<<24) #define IOMUXC_GPR13_SATA_PHY_8_RXEQ_1P5DB (2<<24) diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c index 6cd2b4af9f..5eaec1bdb1 100644 --- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c +++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c @@ -7,6 +7,7 @@ */ #include +#include #include #include #include @@ -20,6 +21,8 @@ #include #include #include +#include +#include #include #include @@ -38,6 +41,21 @@ DECLARE_GLOBAL_DATA_PTR; PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ PAD_CTL_ODE) +#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \ + PAD_CTL_SPEED_HIGH | \ + PAD_CTL_DSE_48ohm | PAD_CTL_SRE_FAST) + +#define ENET_CLK_PAD_CTRL (PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_120ohm | PAD_CTL_SRE_FAST) + +#define ENET_RX_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_SPEED_HIGH | PAD_CTL_SRE_FAST) + +#define I2C_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ + PAD_CTL_ODE) + int dram_init(void) { gd->ram_size = PHYS_SDRAM_SIZE; @@ -60,11 +78,83 @@ static iomux_v3_cfg_t const usdhc4_pads[] = { MX6_PAD_SD4_DATA7__GPIO6_IO_21 | MUX_PAD_CTRL(NO_PAD_CTRL), }; +static iomux_v3_cfg_t const fec1_pads[] = { + MX6_PAD_ENET1_MDC__ENET1_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET1_MDIO__ENET1_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII1_RX_CTL__ENET1_RX_EN | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), + MX6_PAD_RGMII1_RD0__ENET1_RX_DATA_0 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), + MX6_PAD_RGMII1_RD1__ENET1_RX_DATA_1 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), + MX6_PAD_RGMII1_RD2__ENET1_RX_DATA_2 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), + MX6_PAD_RGMII1_RD3__ENET1_RX_DATA_3 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), + MX6_PAD_RGMII1_RXC__ENET1_RX_CLK | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), + MX6_PAD_RGMII1_TX_CTL__ENET1_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII1_TD0__ENET1_TX_DATA_0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII1_TD1__ENET1_TX_DATA_1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII1_TD2__ENET1_TX_DATA_2 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII1_TD3__ENET1_TX_DATA_3 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII1_TXC__ENET1_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), +}; + +static iomux_v3_cfg_t const peri_3v3_pads[] = { + MX6_PAD_QSPI1A_DATA0__GPIO4_IO_16 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +static iomux_v3_cfg_t const phy_control_pads[] = { + /* 25MHz Ethernet PHY Clock */ + MX6_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M | MUX_PAD_CTRL(ENET_CLK_PAD_CTRL), + + /* ENET PHY Power */ + MX6_PAD_ENET2_COL__GPIO2_IO_6 | MUX_PAD_CTRL(NO_PAD_CTRL), + + /* AR8031 PHY Reset */ + MX6_PAD_ENET2_CRS__GPIO2_IO_7 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + static void setup_iomux_uart(void) { imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); } +static int setup_fec(void) +{ + struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; + struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR; + int ret; + int reg; + + /* Use 125MHz anatop loopback REF_CLK1 for ENET1 */ + clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC1_MASK, 0); + + imx_iomux_v3_setup_multiple_pads(phy_control_pads, + ARRAY_SIZE(phy_control_pads)); + + /* Enable the ENET power, active low */ + gpio_direction_output(IMX_GPIO_NR(2, 6) , 0); + + /* Reset AR8031 PHY */ + gpio_direction_output(IMX_GPIO_NR(2, 7) , 0); + udelay(500); + gpio_set_value(IMX_GPIO_NR(2, 7), 1); + + reg = readl(&anatop->pll_enet); + reg |= BM_ANADIG_PLL_ENET_REF_25M_ENABLE; + writel(reg, &anatop->pll_enet); + + ret = enable_fec_anatop_clock(ENET_125MHz); + if (ret) + return ret; + + return 0; +} + +int board_eth_init(bd_t *bis) +{ + imx_iomux_v3_setup_multiple_pads(fec1_pads, ARRAY_SIZE(fec1_pads)); + setup_fec(); + + return cpu_eth_init(bis); +} + #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) /* I2C1 for PMIC */ struct i2c_pads_info i2c_pad_info1 = { @@ -131,11 +221,37 @@ static int pfuze_init(void) return 0; } +int board_phy_config(struct phy_device *phydev) +{ + /* + * Enable 1.8V(SEL_1P5_1P8_POS_REG) on + * Phy control debug reg 0 + */ + phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f); + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x8); + + /* rgmii tx clock delay enable */ + phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05); + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100); + + if (phydev->drv->config) + phydev->drv->config(phydev); + + return 0; +} + int board_early_init_f(void) { setup_iomux_uart(); setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); + /* Enable PERI_3V3, which is used by SD2, ENET, LVDS, BT */ + imx_iomux_v3_setup_multiple_pads(peri_3v3_pads, + ARRAY_SIZE(peri_3v3_pads)); + + /* Active high for ncp692 */ + gpio_direction_output(IMX_GPIO_NR(4, 16) , 1); + return 0; } diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h index 7967b5d4c9..1eda65e081 100644 --- a/include/configs/mx6sxsabresd.h +++ b/include/configs/mx6sxsabresd.h @@ -181,6 +181,23 @@ #define CONFIG_POWER_PFUZE100 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 +/* Network */ +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_FEC_MXC +#define CONFIG_MII + +#define IMX_FEC_BASE ENET_BASE_ADDR +#define CONFIG_FEC_MXC_PHYADDR 0x1 + +#define CONFIG_FEC_XCV_TYPE RGMII +#define CONFIG_ETHPRIME "FEC" + +#define CONFIG_PHYLIB +#define CONFIG_PHY_ATHEROS + /* FLASH and environment organization */ #define CONFIG_SYS_NO_FLASH