mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-28 23:51:33 +00:00
powerpc/85xx: Remove support for PM854/PM856 boards
The PM854/PM856 boards are no longer maintained and thus we are removing support for them. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
This commit is contained in:
Kumar Gala
parent
341d30d4c8
commit
5962be6e43
13 changed files with 0 additions and 2210 deletions
|
|
@ -1,53 +0,0 @@
|
|||
#
|
||||
# (C) Copyright 2001-2006
|
||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
#
|
||||
# See file CREDITS for list of people who contributed to this
|
||||
# project.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software
|
||||
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
# MA 02111-1307 USA
|
||||
#
|
||||
|
||||
include $(TOPDIR)/config.mk
|
||||
|
||||
LIB = $(obj)lib$(BOARD).o
|
||||
|
||||
COBJS-y += $(BOARD).o
|
||||
COBJS-y += law.o
|
||||
COBJS-y += tlb.o
|
||||
COBJS-$(CONFIG_FSL_DDR1) += ddr.o
|
||||
|
||||
SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
|
||||
OBJS := $(addprefix $(obj),$(COBJS-y))
|
||||
SOBJS := $(addprefix $(obj),$(SOBJS))
|
||||
|
||||
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
|
||||
$(call cmd_link_o_target, $(OBJS))
|
||||
|
||||
clean:
|
||||
rm -f $(OBJS) $(SOBJS)
|
||||
|
||||
distclean: clean
|
||||
rm -f $(LIB) core *.bak $(obj).depend
|
||||
|
||||
#########################################################################
|
||||
|
||||
# defines $(obj).depend target
|
||||
include $(SRCTREE)/rules.mk
|
||||
|
||||
sinclude $(obj).depend
|
||||
|
||||
#########################################################################
|
||||
|
|
@ -1,73 +0,0 @@
|
|||
/*
|
||||
* Copyright 2008 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* Version 2 as published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <i2c.h>
|
||||
|
||||
#include <asm/fsl_ddr_sdram.h>
|
||||
#include <asm/fsl_ddr_dimm_params.h>
|
||||
|
||||
static void
|
||||
get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address)
|
||||
{
|
||||
i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr1_spd_eeprom_t));
|
||||
}
|
||||
|
||||
|
||||
unsigned int
|
||||
fsl_ddr_get_mem_data_rate(void)
|
||||
{
|
||||
return get_ddr_freq(0);
|
||||
}
|
||||
|
||||
|
||||
void
|
||||
fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd,
|
||||
unsigned int ctrl_num)
|
||||
{
|
||||
unsigned int i;
|
||||
unsigned int i2c_address = 0;
|
||||
|
||||
for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
|
||||
if (ctrl_num == 0 && i == 0) {
|
||||
i2c_address = SPD_EEPROM_ADDRESS;
|
||||
}
|
||||
get_spd(&(ctrl_dimms_spd[i]), i2c_address);
|
||||
}
|
||||
}
|
||||
|
||||
void fsl_ddr_board_options(memctl_options_t *popts,
|
||||
dimm_params_t *pdimm,
|
||||
unsigned int ctrl_num)
|
||||
{
|
||||
/*
|
||||
* Factors to consider for CPO:
|
||||
* - frequency
|
||||
* - ddr1 vs. ddr2
|
||||
*/
|
||||
popts->cpo_override = 0;
|
||||
|
||||
/*
|
||||
* Factors to consider for write data delay:
|
||||
* - number of DIMMs
|
||||
*
|
||||
* 1 = 1/4 clock delay
|
||||
* 2 = 1/2 clock delay
|
||||
* 3 = 3/4 clock delay
|
||||
* 4 = 1 clock delay
|
||||
* 5 = 5/4 clock delay
|
||||
* 6 = 3/2 clock delay
|
||||
*/
|
||||
popts->write_data_delay = 3;
|
||||
|
||||
/*
|
||||
* Factors to consider for half-strength driver enable:
|
||||
* - number of DIMMs installed
|
||||
*/
|
||||
popts->half_strength_driver_enable = 0;
|
||||
}
|
||||
|
|
@ -1,58 +0,0 @@
|
|||
/*
|
||||
* Copyright 2008 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* (C) Copyright 2000
|
||||
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <asm/fsl_law.h>
|
||||
#include <asm/mmu.h>
|
||||
|
||||
/*
|
||||
* LAW(Local Access Window) configuration:
|
||||
*
|
||||
* 0x0000_0000 0x7fff_ffff DDR 2G
|
||||
* 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
|
||||
* 0xc000_0000 0xdfff_ffff RapidIO 512M
|
||||
* 0xe000_0000 0xe000_ffff CCSR 1M
|
||||
* 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
|
||||
* 0xf000_0000 0xf7ff_ffff SDRAM 128M
|
||||
* 0xf800_0000 0xf80f_ffff BCSR 1M
|
||||
* 0xfc00_0000 0xffff_ffff FLASH (boot bank) 64M
|
||||
*
|
||||
* Notes:
|
||||
* CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
|
||||
* If flash is 8M at default position (last 8M), no LAW needed.
|
||||
*/
|
||||
|
||||
struct law_entry law_table[] = {
|
||||
#ifndef CONFIG_SPD_EEPROM
|
||||
SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR),
|
||||
#endif
|
||||
SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
|
||||
/* This is not so much the SDRAM map as it is the whole localbus map. */
|
||||
SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
|
||||
SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
|
||||
SET_LAW(CONFIG_SYS_RIO_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
|
||||
};
|
||||
|
||||
int num_law_entries = ARRAY_SIZE(law_table);
|
||||
|
|
@ -1,298 +0,0 @@
|
|||
/*
|
||||
* Copyright 2004 Freescale Semiconductor.
|
||||
* (C) Copyright 2002,2003, Motorola Inc.
|
||||
* Xianghua Xiao, (X.Xiao@motorola.com)
|
||||
*
|
||||
* (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
|
||||
#include <common.h>
|
||||
#include <pci.h>
|
||||
#include <netdev.h>
|
||||
#include <asm/processor.h>
|
||||
#include <asm/mmu.h>
|
||||
#include <asm/immap_85xx.h>
|
||||
#include <asm/fsl_ddr_sdram.h>
|
||||
#include <spd_sdram.h>
|
||||
|
||||
#if defined(CONFIG_DDR_ECC)
|
||||
extern void ddr_enable_ecc(unsigned int dram_size);
|
||||
#endif
|
||||
|
||||
void local_bus_init(void);
|
||||
void sdram_init(void);
|
||||
long int fixed_sdram(void);
|
||||
|
||||
|
||||
int board_early_init_f (void)
|
||||
{
|
||||
#if defined(CONFIG_PCI)
|
||||
volatile ccsr_pcix_t *pci = (void *)(CONFIG_SYS_MPC85xx_PCIX_ADDR);
|
||||
|
||||
pci->peer &= 0xffffffdf; /* disable master abort */
|
||||
#endif
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int checkboard (void)
|
||||
{
|
||||
puts("Board: MicroSys PM854\n");
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
printf("PCI1: 32 bit, %d MHz (compiled)\n",
|
||||
CONFIG_SYS_CLK_FREQ / 1000000);
|
||||
#else
|
||||
printf("PCI1: disabled\n");
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Initialize local bus.
|
||||
*/
|
||||
local_bus_init();
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
phys_size_t
|
||||
initdram(int board_type)
|
||||
{
|
||||
long dram_size = 0;
|
||||
|
||||
puts("Initializing\n");
|
||||
|
||||
#if defined(CONFIG_DDR_DLL)
|
||||
{
|
||||
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
||||
int i,x;
|
||||
|
||||
x = 10;
|
||||
|
||||
/*
|
||||
* Work around to stabilize DDR DLL
|
||||
*/
|
||||
gur->ddrdllcr = 0x81000000;
|
||||
asm("sync;isync;msync");
|
||||
udelay (200);
|
||||
while (gur->ddrdllcr != 0x81000100)
|
||||
{
|
||||
gur->devdisr = gur->devdisr | 0x00010000;
|
||||
asm("sync;isync;msync");
|
||||
for (i=0; i<x; i++)
|
||||
;
|
||||
gur->devdisr = gur->devdisr & 0xfff7ffff;
|
||||
asm("sync;isync;msync");
|
||||
x++;
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPD_EEPROM)
|
||||
dram_size = fsl_ddr_sdram();
|
||||
dram_size = setup_ddr_tlbs(dram_size / 0x100000);
|
||||
dram_size *= 0x100000;
|
||||
#else
|
||||
dram_size = fixed_sdram ();
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_DDR_ECC)
|
||||
/*
|
||||
* Initialize and enable DDR ECC.
|
||||
*/
|
||||
ddr_enable_ecc(dram_size);
|
||||
#endif
|
||||
puts(" DDR: ");
|
||||
return dram_size;
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* Initialize Local Bus
|
||||
*/
|
||||
|
||||
void
|
||||
local_bus_init(void)
|
||||
{
|
||||
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
||||
volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
|
||||
|
||||
uint clkdiv;
|
||||
uint lbc_hz;
|
||||
sys_info_t sysinfo;
|
||||
|
||||
/*
|
||||
* Errata LBC11.
|
||||
* Fix Local Bus clock glitch when DLL is enabled.
|
||||
*
|
||||
* If localbus freq is < 66MHz, DLL bypass mode must be used.
|
||||
* If localbus freq is > 133MHz, DLL can be safely enabled.
|
||||
* Between 66 and 133, the DLL is enabled with an override workaround.
|
||||
*/
|
||||
|
||||
get_sys_info(&sysinfo);
|
||||
clkdiv = lbc->lcrr & LCRR_CLKDIV;
|
||||
lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
|
||||
|
||||
if (lbc_hz < 66) {
|
||||
lbc->lcrr = CONFIG_SYS_LBC_LCRR | 0x80000000; /* DLL Bypass */
|
||||
|
||||
} else if (lbc_hz >= 133) {
|
||||
lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000); /* DLL Enabled */
|
||||
|
||||
} else {
|
||||
/*
|
||||
* On REV1 boards, need to change CLKDIV before enable DLL.
|
||||
* Default CLKDIV is 8, change it to 4 temporarily.
|
||||
*/
|
||||
uint pvr = get_pvr();
|
||||
uint temp_lbcdll = 0;
|
||||
|
||||
if (pvr == PVR_85xx_REV1) {
|
||||
/* FIXME: Justify the high bit here. */
|
||||
lbc->lcrr = 0x10000004;
|
||||
}
|
||||
|
||||
lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000); /* DLL Enabled */
|
||||
udelay(200);
|
||||
|
||||
/*
|
||||
* Sample LBC DLL ctrl reg, upshift it to set the
|
||||
* override bits.
|
||||
*/
|
||||
temp_lbcdll = gur->lbcdllcr;
|
||||
gur->lbcdllcr = (((temp_lbcdll & 0xff) << 16) | 0x80000000);
|
||||
asm("sync;isync;msync");
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
#if defined(CONFIG_SYS_DRAM_TEST)
|
||||
int testdram (void)
|
||||
{
|
||||
uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
|
||||
uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
|
||||
uint *p;
|
||||
|
||||
printf("SDRAM test phase 1:\n");
|
||||
for (p = pstart; p < pend; p++)
|
||||
*p = 0xaaaaaaaa;
|
||||
|
||||
for (p = pstart; p < pend; p++) {
|
||||
if (*p != 0xaaaaaaaa) {
|
||||
printf ("SDRAM test fails at: %08x\n", (uint) p);
|
||||
return 1;
|
||||
}
|
||||
}
|
||||
|
||||
printf("SDRAM test phase 2:\n");
|
||||
for (p = pstart; p < pend; p++)
|
||||
*p = 0x55555555;
|
||||
|
||||
for (p = pstart; p < pend; p++) {
|
||||
if (*p != 0x55555555) {
|
||||
printf ("SDRAM test fails at: %08x\n", (uint) p);
|
||||
return 1;
|
||||
}
|
||||
}
|
||||
|
||||
printf("SDRAM test passed.\n");
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#if !defined(CONFIG_SPD_EEPROM)
|
||||
/*************************************************************************
|
||||
* fixed sdram init -- doesn't use serial presence detect.
|
||||
************************************************************************/
|
||||
long int fixed_sdram (void)
|
||||
{
|
||||
#ifndef CONFIG_SYS_RAMBOOT
|
||||
volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
|
||||
|
||||
ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
|
||||
ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
|
||||
ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
|
||||
ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
|
||||
ddr->sdram_mode = CONFIG_SYS_DDR_MODE;
|
||||
ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
|
||||
#if defined (CONFIG_DDR_ECC)
|
||||
ddr->err_disable = 0x0000000D;
|
||||
ddr->err_sbe = 0x00ff0000;
|
||||
#endif
|
||||
asm("sync;isync;msync");
|
||||
udelay(500);
|
||||
#if defined (CONFIG_DDR_ECC)
|
||||
/* Enable ECC checking */
|
||||
ddr->sdram_cfg = (CONFIG_SYS_DDR_CONTROL | 0x20000000);
|
||||
#else
|
||||
ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL;
|
||||
#endif
|
||||
asm("sync; isync; msync");
|
||||
udelay(500);
|
||||
#endif
|
||||
return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
|
||||
}
|
||||
#endif /* !defined(CONFIG_SPD_EEPROM) */
|
||||
|
||||
|
||||
#if defined(CONFIG_PCI)
|
||||
/*
|
||||
* Initialize PCI Devices, report devices found.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_PCI_PNP
|
||||
static struct pci_config_table pci_pm854_config_table[] = {
|
||||
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
|
||||
PCI_IDSEL_NUMBER, PCI_ANY_ID,
|
||||
pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
|
||||
PCI_ENET0_MEMADDR,
|
||||
PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
|
||||
} },
|
||||
{ }
|
||||
};
|
||||
#endif
|
||||
|
||||
|
||||
static struct pci_controller hose = {
|
||||
#ifndef CONFIG_PCI_PNP
|
||||
config_table: pci_pm854_config_table,
|
||||
#endif
|
||||
};
|
||||
|
||||
#endif /* CONFIG_PCI */
|
||||
|
||||
|
||||
void
|
||||
pci_init_board(void)
|
||||
{
|
||||
#ifdef CONFIG_PCI
|
||||
pci_mpc85xx_init(&hose);
|
||||
#endif /* CONFIG_PCI */
|
||||
}
|
||||
|
||||
int board_eth_init(bd_t *bis)
|
||||
{
|
||||
cpu_eth_init(bis); /* Intialize TSECs first */
|
||||
return pci_eth_init(bis);
|
||||
}
|
||||
|
|
@ -1,117 +0,0 @@
|
|||
/*
|
||||
* Copyright 2008 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* (C) Copyright 2000
|
||||
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <asm/mmu.h>
|
||||
|
||||
struct fsl_e_tlb_entry tlb_table[] = {
|
||||
/* TLB 0 - for temp stack in cache */
|
||||
SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
|
||||
MAS3_SX|MAS3_SW|MAS3_SR, 0,
|
||||
0, 0, BOOKE_PAGESZ_4K, 0),
|
||||
SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
|
||||
MAS3_SX|MAS3_SW|MAS3_SR, 0,
|
||||
0, 0, BOOKE_PAGESZ_4K, 0),
|
||||
SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
|
||||
MAS3_SX|MAS3_SW|MAS3_SR, 0,
|
||||
0, 0, BOOKE_PAGESZ_4K, 0),
|
||||
SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
|
||||
MAS3_SX|MAS3_SW|MAS3_SR, 0,
|
||||
0, 0, BOOKE_PAGESZ_4K, 0),
|
||||
|
||||
/*
|
||||
* TLB 0: 64M Non-cacheable, guarded
|
||||
* 0xfc000000 64M FLASH (8,16,32 or 64 MB)
|
||||
* Out of reset this entry is only 4K.
|
||||
*/
|
||||
SET_TLB_ENTRY(1, 0xfc000000, 0xfc000000,
|
||||
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
|
||||
0, 0, BOOKE_PAGESZ_16M, 1),
|
||||
|
||||
/*
|
||||
* TLB 1: 256M Non-cacheable, guarded
|
||||
* 0x80000000 256M PCI1 MEM First half
|
||||
*/
|
||||
SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS,
|
||||
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
|
||||
0, 1, BOOKE_PAGESZ_256M, 1),
|
||||
|
||||
/*
|
||||
* TLB 2: 256M Non-cacheable, guarded
|
||||
* 0x90000000 256M PCI1 MEM Second half
|
||||
*/
|
||||
SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
|
||||
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
|
||||
0, 2, BOOKE_PAGESZ_256M, 1),
|
||||
|
||||
/*
|
||||
* TLB 3: 256M Non-cacheable, guarded
|
||||
* 0xc0000000 256M Rapid IO MEM First half
|
||||
*/
|
||||
SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE, CONFIG_SYS_RIO_MEM_BASE,
|
||||
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
|
||||
0, 3, BOOKE_PAGESZ_256M, 1),
|
||||
|
||||
/*
|
||||
* TLB 4: 256M Non-cacheable, guarded
|
||||
* 0xd0000000 256M Rapid IO MEM Second half
|
||||
*/
|
||||
SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE + 0x10000000, CONFIG_SYS_RIO_MEM_BASE + 0x10000000,
|
||||
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
|
||||
0, 4, BOOKE_PAGESZ_256M, 1),
|
||||
|
||||
/*
|
||||
* TLB 5: 64M Non-cacheable, guarded
|
||||
* 0xe000_0000 1M CCSRBAR
|
||||
* 0xe200_0000 16M PCI1 IO
|
||||
*/
|
||||
SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
|
||||
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
|
||||
0, 5, BOOKE_PAGESZ_64M, 1),
|
||||
|
||||
/*
|
||||
* TLB 6: 64M Cacheable, non-guarded
|
||||
* 0xf000_0000 64M LBC SDRAM
|
||||
*/
|
||||
SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE,
|
||||
MAS3_SX|MAS3_SW|MAS3_SR, 0,
|
||||
0, 6, BOOKE_PAGESZ_64M, 1),
|
||||
|
||||
#if !defined(CONFIG_SPD_EEPROM)
|
||||
/*
|
||||
* TLB 7: 256M DDR
|
||||
* 0x00000000 256M DDR System memory
|
||||
* Without SPD EEPROM configured DDR, this must be setup manually.
|
||||
* Make sure the TLB count at the top of this table is correct.
|
||||
* Likely it needs to be increased by two for these entries.
|
||||
*/
|
||||
|
||||
SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
|
||||
MAS3_SX|MAS3_SW|MAS3_SR, 0,
|
||||
0, 7, BOOKE_PAGESZ_256M, 1),
|
||||
#endif
|
||||
};
|
||||
|
||||
int num_tlb_entries = ARRAY_SIZE(tlb_table);
|
||||
|
|
@ -1,53 +0,0 @@
|
|||
#
|
||||
# (C) Copyright 2001-2006
|
||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
#
|
||||
# See file CREDITS for list of people who contributed to this
|
||||
# project.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software
|
||||
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
# MA 02111-1307 USA
|
||||
#
|
||||
|
||||
include $(TOPDIR)/config.mk
|
||||
|
||||
LIB = $(obj)lib$(BOARD).o
|
||||
|
||||
COBJS-y += $(BOARD).o
|
||||
COBJS-y += law.o
|
||||
COBJS-y += tlb.o
|
||||
COBJS-$(CONFIG_FSL_DDR1) += ddr.o
|
||||
|
||||
SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
|
||||
OBJS := $(addprefix $(obj),$(COBJS-y))
|
||||
SOBJS := $(addprefix $(obj),$(SOBJS))
|
||||
|
||||
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
|
||||
$(call cmd_link_o_target, $(OBJS))
|
||||
|
||||
clean:
|
||||
rm -f $(OBJS) $(SOBJS)
|
||||
|
||||
distclean: clean
|
||||
rm -f $(LIB) core *.bak $(obj).depend
|
||||
|
||||
#########################################################################
|
||||
|
||||
# defines $(obj).depend target
|
||||
include $(SRCTREE)/rules.mk
|
||||
|
||||
sinclude $(obj).depend
|
||||
|
||||
#########################################################################
|
||||
|
|
@ -1,73 +0,0 @@
|
|||
/*
|
||||
* Copyright 2008 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* Version 2 as published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <i2c.h>
|
||||
|
||||
#include <asm/fsl_ddr_sdram.h>
|
||||
#include <asm/fsl_ddr_dimm_params.h>
|
||||
|
||||
static void
|
||||
get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address)
|
||||
{
|
||||
i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr1_spd_eeprom_t));
|
||||
}
|
||||
|
||||
|
||||
unsigned int
|
||||
fsl_ddr_get_mem_data_rate(void)
|
||||
{
|
||||
return get_ddr_freq(0);
|
||||
}
|
||||
|
||||
|
||||
void
|
||||
fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd,
|
||||
unsigned int ctrl_num)
|
||||
{
|
||||
unsigned int i;
|
||||
unsigned int i2c_address = 0;
|
||||
|
||||
for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
|
||||
if (ctrl_num == 0 && i == 0) {
|
||||
i2c_address = SPD_EEPROM_ADDRESS;
|
||||
}
|
||||
get_spd(&(ctrl_dimms_spd[i]), i2c_address);
|
||||
}
|
||||
}
|
||||
|
||||
void fsl_ddr_board_options(memctl_options_t *popts,
|
||||
dimm_params_t *pdimm,
|
||||
unsigned int ctrl_num)
|
||||
{
|
||||
/*
|
||||
* Factors to consider for CPO:
|
||||
* - frequency
|
||||
* - ddr1 vs. ddr2
|
||||
*/
|
||||
popts->cpo_override = 0;
|
||||
|
||||
/*
|
||||
* Factors to consider for write data delay:
|
||||
* - number of DIMMs
|
||||
*
|
||||
* 1 = 1/4 clock delay
|
||||
* 2 = 1/2 clock delay
|
||||
* 3 = 3/4 clock delay
|
||||
* 4 = 1 clock delay
|
||||
* 5 = 5/4 clock delay
|
||||
* 6 = 3/2 clock delay
|
||||
*/
|
||||
popts->write_data_delay = 3;
|
||||
|
||||
/*
|
||||
* Factors to consider for half-strength driver enable:
|
||||
* - number of DIMMs installed
|
||||
*/
|
||||
popts->half_strength_driver_enable = 0;
|
||||
}
|
||||
|
|
@ -1,58 +0,0 @@
|
|||
/*
|
||||
* Copyright 2008 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* (C) Copyright 2000
|
||||
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <asm/fsl_law.h>
|
||||
#include <asm/mmu.h>
|
||||
|
||||
/*
|
||||
* LAW(Local Access Window) configuration:
|
||||
*
|
||||
* 0x0000_0000 0x7fff_ffff DDR 2G
|
||||
* 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
|
||||
* 0xc000_0000 0xdfff_ffff RapidIO 512M
|
||||
* 0xe000_0000 0xe000_ffff CCSR 1M
|
||||
* 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
|
||||
* 0xf000_0000 0xf7ff_ffff SDRAM 128M
|
||||
* 0xf800_0000 0xf80f_ffff BCSR 1M
|
||||
* 0xfc00_0000 0xffff_ffff FLASH (boot bank) 64M
|
||||
*
|
||||
* Notes:
|
||||
* CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
|
||||
* If flash is 8M at default position (last 8M), no LAW needed.
|
||||
*/
|
||||
|
||||
struct law_entry law_table[] = {
|
||||
#ifndef CONFIG_SPD_EEPROM
|
||||
SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR),
|
||||
#endif
|
||||
SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
|
||||
/* This is not so much the SDRAM map as it is the whole localbus map. */
|
||||
SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
|
||||
SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
|
||||
SET_LAW(CONFIG_SYS_RIO_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
|
||||
};
|
||||
|
||||
int num_law_entries = ARRAY_SIZE(law_table);
|
||||
|
|
@ -1,453 +0,0 @@
|
|||
/*
|
||||
* Copyright 2004 Freescale Semiconductor.
|
||||
* (C) Copyright 2003,Motorola Inc.
|
||||
* Xianghua Xiao, (X.Xiao@motorola.com)
|
||||
*
|
||||
* (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
|
||||
#include <common.h>
|
||||
#include <pci.h>
|
||||
#include <asm/processor.h>
|
||||
#include <asm/mmu.h>
|
||||
#include <asm/immap_85xx.h>
|
||||
#include <asm/fsl_ddr_sdram.h>
|
||||
#include <ioports.h>
|
||||
#include <spd_sdram.h>
|
||||
#include <miiphy.h>
|
||||
#include <netdev.h>
|
||||
|
||||
#if defined(CONFIG_DDR_ECC)
|
||||
extern void ddr_enable_ecc(unsigned int dram_size);
|
||||
#endif
|
||||
|
||||
void local_bus_init(void);
|
||||
long int fixed_sdram(void);
|
||||
|
||||
/*
|
||||
* I/O Port configuration table
|
||||
*
|
||||
* if conf is 1, then that port pin will be configured at boot time
|
||||
* according to the five values podr/pdir/ppar/psor/pdat for that entry
|
||||
*/
|
||||
|
||||
const iop_conf_t iop_conf_tab[4][32] = {
|
||||
|
||||
/* Port A configuration */
|
||||
{ /* conf ppar psor pdir podr pdat */
|
||||
/* PA31 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxENB */
|
||||
/* PA30 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 TxClav */
|
||||
/* PA29 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxSOC */
|
||||
/* PA28 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 RxENB */
|
||||
/* PA27 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxSOC */
|
||||
/* PA26 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxClav */
|
||||
/* PA25 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[0] */
|
||||
/* PA24 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[1] */
|
||||
/* PA23 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[2] */
|
||||
/* PA22 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[3] */
|
||||
/* PA21 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[4] */
|
||||
/* PA20 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[5] */
|
||||
/* PA19 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[6] */
|
||||
/* PA18 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[7] */
|
||||
/* PA17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[7] */
|
||||
/* PA16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[6] */
|
||||
/* PA15 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[5] */
|
||||
/* PA14 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[4] */
|
||||
/* PA13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[3] */
|
||||
/* PA12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[2] */
|
||||
/* PA11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[1] */
|
||||
/* PA10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[0] */
|
||||
/* PA9 */ { 0, 1, 1, 1, 0, 0 }, /* FCC1 L1TXD */
|
||||
/* PA8 */ { 0, 1, 1, 0, 0, 0 }, /* FCC1 L1RXD */
|
||||
/* PA7 */ { 0, 0, 0, 1, 0, 0 }, /* PA7 */
|
||||
/* PA6 */ { 0, 1, 1, 1, 0, 0 }, /* TDM A1 L1RSYNC */
|
||||
/* PA5 */ { 0, 0, 0, 1, 0, 0 }, /* PA5 */
|
||||
/* PA4 */ { 0, 0, 0, 1, 0, 0 }, /* PA4 */
|
||||
/* PA3 */ { 0, 0, 0, 1, 0, 0 }, /* PA3 */
|
||||
/* PA2 */ { 0, 0, 0, 1, 0, 0 }, /* PA2 */
|
||||
/* PA1 */ { 0, 0, 0, 0, 0, 0 }, /* FREERUN */
|
||||
/* PA0 */ { 0, 0, 0, 1, 0, 0 } /* PA0 */
|
||||
},
|
||||
|
||||
/* Port B configuration */
|
||||
{ /* conf ppar psor pdir podr pdat */
|
||||
/* PB31 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */
|
||||
/* PB30 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */
|
||||
/* PB29 */ { 0, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */
|
||||
/* PB28 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */
|
||||
/* PB27 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */
|
||||
/* PB26 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */
|
||||
/* PB25 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */
|
||||
/* PB24 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */
|
||||
/* PB23 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */
|
||||
/* PB22 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */
|
||||
/* PB21 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */
|
||||
/* PB20 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */
|
||||
/* PB19 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */
|
||||
/* PB18 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */
|
||||
/* PB17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:RX_DIV */
|
||||
/* PB16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:RX_ERR */
|
||||
/* PB15 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3:TX_ERR */
|
||||
/* PB14 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3:TX_EN */
|
||||
/* PB13 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:COL */
|
||||
/* PB12 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:CRS */
|
||||
/* PB11 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
|
||||
/* PB10 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
|
||||
/* PB9 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
|
||||
/* PB8 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
|
||||
/* PB7 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
|
||||
/* PB6 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
|
||||
/* PB5 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
|
||||
/* PB4 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
|
||||
/* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
|
||||
/* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
|
||||
/* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
|
||||
/* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
|
||||
},
|
||||
|
||||
/* Port C */
|
||||
{ /* conf ppar psor pdir podr pdat */
|
||||
/* PC31 */ { 0, 0, 0, 1, 0, 0 }, /* PC31 */
|
||||
/* PC30 */ { 0, 0, 0, 1, 0, 0 }, /* PC30 */
|
||||
/* PC29 */ { 0, 1, 1, 0, 0, 0 }, /* SCC1 EN *CLSN */
|
||||
/* PC28 */ { 0, 0, 0, 1, 0, 0 }, /* PC28 */
|
||||
/* PC27 */ { 0, 0, 0, 1, 0, 0 }, /* UART Clock in */
|
||||
/* PC26 */ { 0, 0, 0, 1, 0, 0 }, /* PC26 */
|
||||
/* PC25 */ { 0, 0, 0, 1, 0, 0 }, /* PC25 */
|
||||
/* PC24 */ { 0, 0, 0, 1, 0, 0 }, /* PC24 */
|
||||
/* PC23 */ { 0, 1, 0, 1, 0, 0 }, /* ATMTFCLK */
|
||||
/* PC22 */ { 0, 1, 0, 0, 0, 0 }, /* ATMRFCLK */
|
||||
/* PC21 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RXCLK */
|
||||
/* PC20 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN TXCLK */
|
||||
/* PC19 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK CLK13 */
|
||||
/* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK14) */
|
||||
/* PC17 */ { 1, 1, 0, 0, 0, 0 }, /* PC17 */
|
||||
/* PC16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK16) */
|
||||
/* PC15 */ { 0, 1, 0, 0, 0, 0 }, /* PC15 */
|
||||
/* PC14 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN *CD */
|
||||
/* PC13 */ { 0, 1, 0, 0, 0, 0 }, /* PC13 */
|
||||
/* PC12 */ { 0, 1, 0, 1, 0, 0 }, /* PC12 */
|
||||
/* PC11 */ { 0, 0, 0, 1, 0, 0 }, /* LXT971 transmit control */
|
||||
/* PC10 */ { 0, 0, 0, 1, 0, 0 }, /* FETHMDC */
|
||||
/* PC9 */ { 0, 0, 0, 0, 0, 0 }, /* FETHMDIO */
|
||||
/* PC8 */ { 0, 0, 0, 1, 0, 0 }, /* PC8 */
|
||||
/* PC7 */ { 0, 0, 0, 1, 0, 0 }, /* PC7 */
|
||||
/* PC6 */ { 0, 0, 0, 1, 0, 0 }, /* PC6 */
|
||||
/* PC5 */ { 0, 0, 0, 1, 0, 0 }, /* PC5 */
|
||||
/* PC4 */ { 0, 0, 0, 1, 0, 0 }, /* PC4 */
|
||||
/* PC3 */ { 0, 0, 0, 1, 0, 0 }, /* PC3 */
|
||||
/* PC2 */ { 0, 0, 0, 1, 0, 1 }, /* ENET FDE */
|
||||
/* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* ENET DSQE */
|
||||
/* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* ENET LBK */
|
||||
},
|
||||
|
||||
/* Port D */
|
||||
{ /* conf ppar psor pdir podr pdat */
|
||||
/* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */
|
||||
/* PD30 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */
|
||||
/* PD29 */ { 1, 1, 0, 1, 0, 0 }, /* SCC1 EN TENA */
|
||||
/* PD28 */ { 1, 1, 0, 0, 0, 0 }, /* PD28 */
|
||||
/* PD27 */ { 1, 1, 0, 1, 0, 0 }, /* PD27 */
|
||||
/* PD26 */ { 1, 1, 0, 1, 0, 0 }, /* PD26 */
|
||||
/* PD25 */ { 0, 0, 0, 1, 0, 0 }, /* PD25 */
|
||||
/* PD24 */ { 0, 0, 0, 1, 0, 0 }, /* PD24 */
|
||||
/* PD23 */ { 0, 0, 0, 1, 0, 0 }, /* PD23 */
|
||||
/* PD22 */ { 0, 0, 0, 1, 0, 0 }, /* PD22 */
|
||||
/* PD21 */ { 0, 0, 0, 1, 0, 0 }, /* PD21 */
|
||||
/* PD20 */ { 0, 0, 0, 1, 0, 0 }, /* PD20 */
|
||||
/* PD19 */ { 0, 0, 0, 1, 0, 0 }, /* PD19 */
|
||||
/* PD18 */ { 0, 0, 0, 1, 0, 0 }, /* PD18 */
|
||||
/* PD17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXPRTY */
|
||||
/* PD16 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXPRTY */
|
||||
/* PD15 */ { 0, 1, 1, 0, 1, 0 }, /* I2C SDA */
|
||||
/* PD14 */ { 0, 0, 0, 1, 0, 0 }, /* LED */
|
||||
/* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */
|
||||
/* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */
|
||||
/* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */
|
||||
/* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */
|
||||
/* PD9 */ { 0, 1, 0, 1, 0, 0 }, /* SMC1 TXD */
|
||||
/* PD8 */ { 0, 1, 0, 0, 0, 0 }, /* SMC1 RXD */
|
||||
/* PD7 */ { 0, 0, 0, 1, 0, 1 }, /* PD7 */
|
||||
/* PD6 */ { 0, 0, 0, 1, 0, 1 }, /* PD6 */
|
||||
/* PD5 */ { 0, 0, 0, 1, 0, 1 }, /* PD5 */
|
||||
/* PD4 */ { 0, 0, 0, 1, 0, 1 }, /* PD4 */
|
||||
/* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
|
||||
/* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
|
||||
/* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
|
||||
/* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
|
||||
}
|
||||
};
|
||||
|
||||
|
||||
int board_early_init_f (void)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
void reset_phy (void)
|
||||
{
|
||||
}
|
||||
|
||||
|
||||
int checkboard (void)
|
||||
{
|
||||
puts("Board: MicroSys PM856\n");
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
printf("PCI1: 32 bit, %d MHz (compiled)\n",
|
||||
CONFIG_SYS_CLK_FREQ / 1000000);
|
||||
#else
|
||||
printf("PCI1: disabled\n");
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Initialize local bus.
|
||||
*/
|
||||
local_bus_init();
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
phys_size_t
|
||||
initdram(int board_type)
|
||||
{
|
||||
long dram_size = 0;
|
||||
|
||||
|
||||
puts("Initializing\n");
|
||||
|
||||
#if defined(CONFIG_DDR_DLL)
|
||||
{
|
||||
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
||||
int i,x;
|
||||
|
||||
x = 10;
|
||||
|
||||
/*
|
||||
* Work around to stabilize DDR DLL
|
||||
*/
|
||||
gur->ddrdllcr = 0x81000000;
|
||||
asm("sync;isync;msync");
|
||||
udelay (200);
|
||||
while (gur->ddrdllcr != 0x81000100)
|
||||
{
|
||||
gur->devdisr = gur->devdisr | 0x00010000;
|
||||
asm("sync;isync;msync");
|
||||
for (i=0; i<x; i++)
|
||||
;
|
||||
gur->devdisr = gur->devdisr & 0xfff7ffff;
|
||||
asm("sync;isync;msync");
|
||||
x++;
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPD_EEPROM)
|
||||
dram_size = fsl_ddr_sdram();
|
||||
dram_size = setup_ddr_tlbs(dram_size / 0x100000);
|
||||
dram_size *= 0x100000;
|
||||
#else
|
||||
dram_size = fixed_sdram ();
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_DDR_ECC)
|
||||
/*
|
||||
* Initialize and enable DDR ECC.
|
||||
*/
|
||||
ddr_enable_ecc(dram_size);
|
||||
#endif
|
||||
|
||||
puts(" DDR: ");
|
||||
return dram_size;
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* Initialize Local Bus
|
||||
*/
|
||||
|
||||
void
|
||||
local_bus_init(void)
|
||||
{
|
||||
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
||||
volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
|
||||
|
||||
uint clkdiv;
|
||||
uint lbc_hz;
|
||||
sys_info_t sysinfo;
|
||||
|
||||
/*
|
||||
* Errata LBC11.
|
||||
* Fix Local Bus clock glitch when DLL is enabled.
|
||||
*
|
||||
* If localbus freq is < 66MHz, DLL bypass mode must be used.
|
||||
* If localbus freq is > 133MHz, DLL can be safely enabled.
|
||||
* Between 66 and 133, the DLL is enabled with an override workaround.
|
||||
*/
|
||||
|
||||
get_sys_info(&sysinfo);
|
||||
clkdiv = lbc->lcrr & LCRR_CLKDIV;
|
||||
lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
|
||||
|
||||
if (lbc_hz < 66) {
|
||||
lbc->lcrr = CONFIG_SYS_LBC_LCRR | 0x80000000; /* DLL Bypass */
|
||||
|
||||
} else if (lbc_hz >= 133) {
|
||||
lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000); /* DLL Enabled */
|
||||
|
||||
} else {
|
||||
/*
|
||||
* On REV1 boards, need to change CLKDIV before enable DLL.
|
||||
* Default CLKDIV is 8, change it to 4 temporarily.
|
||||
*/
|
||||
uint pvr = get_pvr();
|
||||
uint temp_lbcdll = 0;
|
||||
|
||||
if (pvr == PVR_85xx_REV1) {
|
||||
/* FIXME: Justify the high bit here. */
|
||||
lbc->lcrr = 0x10000004;
|
||||
}
|
||||
|
||||
lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000);/* DLL Enabled */
|
||||
udelay(200);
|
||||
|
||||
/*
|
||||
* Sample LBC DLL ctrl reg, upshift it to set the
|
||||
* override bits.
|
||||
*/
|
||||
temp_lbcdll = gur->lbcdllcr;
|
||||
gur->lbcdllcr = (((temp_lbcdll & 0xff) << 16) | 0x80000000);
|
||||
asm("sync;isync;msync");
|
||||
}
|
||||
}
|
||||
|
||||
#if defined(CONFIG_SYS_DRAM_TEST)
|
||||
int testdram (void)
|
||||
{
|
||||
uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
|
||||
uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
|
||||
uint *p;
|
||||
|
||||
printf("SDRAM test phase 1:\n");
|
||||
for (p = pstart; p < pend; p++)
|
||||
*p = 0xaaaaaaaa;
|
||||
|
||||
for (p = pstart; p < pend; p++) {
|
||||
if (*p != 0xaaaaaaaa) {
|
||||
printf ("SDRAM test fails at: %08x\n", (uint) p);
|
||||
return 1;
|
||||
}
|
||||
}
|
||||
|
||||
printf("SDRAM test phase 2:\n");
|
||||
for (p = pstart; p < pend; p++)
|
||||
*p = 0x55555555;
|
||||
|
||||
for (p = pstart; p < pend; p++) {
|
||||
if (*p != 0x55555555) {
|
||||
printf ("SDRAM test fails at: %08x\n", (uint) p);
|
||||
return 1;
|
||||
}
|
||||
}
|
||||
|
||||
printf("SDRAM test passed.\n");
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#if !defined(CONFIG_SPD_EEPROM)
|
||||
/*************************************************************************
|
||||
* fixed sdram init -- doesn't use serial presence detect.
|
||||
************************************************************************/
|
||||
long int fixed_sdram (void)
|
||||
{
|
||||
#ifndef CONFIG_SYS_RAMBOOT
|
||||
volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
|
||||
|
||||
ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
|
||||
ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
|
||||
ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
|
||||
ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
|
||||
ddr->sdram_mode = CONFIG_SYS_DDR_MODE;
|
||||
ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
|
||||
#if defined (CONFIG_DDR_ECC)
|
||||
ddr->err_disable = 0x0000000D;
|
||||
ddr->err_sbe = 0x00ff0000;
|
||||
#endif
|
||||
asm("sync;isync;msync");
|
||||
udelay(500);
|
||||
#if defined (CONFIG_DDR_ECC)
|
||||
/* Enable ECC checking */
|
||||
ddr->sdram_cfg = (CONFIG_SYS_DDR_CONTROL | 0x20000000);
|
||||
#else
|
||||
ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL;
|
||||
#endif
|
||||
asm("sync; isync; msync");
|
||||
udelay(500);
|
||||
#endif
|
||||
return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
|
||||
}
|
||||
#endif /* !defined(CONFIG_SPD_EEPROM) */
|
||||
|
||||
|
||||
#if defined(CONFIG_PCI)
|
||||
/*
|
||||
* Initialize PCI Devices, report devices found.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_PCI_PNP
|
||||
static struct pci_config_table pci_mpc85xxads_config_table[] = {
|
||||
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
|
||||
PCI_IDSEL_NUMBER, PCI_ANY_ID,
|
||||
pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
|
||||
PCI_ENET0_MEMADDR,
|
||||
PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
|
||||
} },
|
||||
{ }
|
||||
};
|
||||
#endif
|
||||
|
||||
|
||||
static struct pci_controller hose = {
|
||||
#ifndef CONFIG_PCI_PNP
|
||||
config_table: pci_mpc85xxads_config_table,
|
||||
#endif
|
||||
};
|
||||
|
||||
#endif /* CONFIG_PCI */
|
||||
|
||||
|
||||
void
|
||||
pci_init_board(void)
|
||||
{
|
||||
#ifdef CONFIG_PCI
|
||||
pci_mpc85xx_init(&hose);
|
||||
#endif /* CONFIG_PCI */
|
||||
}
|
||||
|
||||
int board_eth_init(bd_t *bis)
|
||||
{
|
||||
cpu_eth_init(bis); /* Intialize TSECs first */
|
||||
return pci_eth_init(bis);
|
||||
}
|
||||
|
|
@ -1,117 +0,0 @@
|
|||
/*
|
||||
* Copyright 2008 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* (C) Copyright 2000
|
||||
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <asm/mmu.h>
|
||||
|
||||
struct fsl_e_tlb_entry tlb_table[] = {
|
||||
/* TLB 0 - for temp stack in cache */
|
||||
SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
|
||||
MAS3_SX|MAS3_SW|MAS3_SR, 0,
|
||||
0, 0, BOOKE_PAGESZ_4K, 0),
|
||||
SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
|
||||
MAS3_SX|MAS3_SW|MAS3_SR, 0,
|
||||
0, 0, BOOKE_PAGESZ_4K, 0),
|
||||
SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
|
||||
MAS3_SX|MAS3_SW|MAS3_SR, 0,
|
||||
0, 0, BOOKE_PAGESZ_4K, 0),
|
||||
SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
|
||||
MAS3_SX|MAS3_SW|MAS3_SR, 0,
|
||||
0, 0, BOOKE_PAGESZ_4K, 0),
|
||||
|
||||
/*
|
||||
* TLB 0: 64M Non-cacheable, guarded
|
||||
* 0xfc000000 64M FLASH (8,16,32 or 64 MB)
|
||||
* Out of reset this entry is only 4K.
|
||||
*/
|
||||
SET_TLB_ENTRY(1, 0xfc000000, 0xfc000000,
|
||||
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
|
||||
0, 0, BOOKE_PAGESZ_16M, 1),
|
||||
|
||||
/*
|
||||
* TLB 1: 256M Non-cacheable, guarded
|
||||
* 0x80000000 256M PCI1 MEM First half
|
||||
*/
|
||||
SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS,
|
||||
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
|
||||
0, 1, BOOKE_PAGESZ_256M, 1),
|
||||
|
||||
/*
|
||||
* TLB 2: 256M Non-cacheable, guarded
|
||||
* 0x90000000 256M PCI1 MEM Second half
|
||||
*/
|
||||
SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
|
||||
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
|
||||
0, 2, BOOKE_PAGESZ_256M, 1),
|
||||
|
||||
/*
|
||||
* TLB 3: 256M Non-cacheable, guarded
|
||||
* 0xc0000000 256M Rapid IO MEM First half
|
||||
*/
|
||||
SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE, CONFIG_SYS_RIO_MEM_BASE,
|
||||
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
|
||||
0, 3, BOOKE_PAGESZ_256M, 1),
|
||||
|
||||
/*
|
||||
* TLB 4: 256M Non-cacheable, guarded
|
||||
* 0xd0000000 256M Rapid IO MEM Second half
|
||||
*/
|
||||
SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE + 0x10000000, CONFIG_SYS_RIO_MEM_BASE + 0x10000000,
|
||||
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
|
||||
0, 4, BOOKE_PAGESZ_256M, 1),
|
||||
|
||||
/*
|
||||
* TLB 5: 64M Non-cacheable, guarded
|
||||
* 0xe000_0000 1M CCSRBAR
|
||||
* 0xe200_0000 16M PCI1 IO
|
||||
*/
|
||||
SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
|
||||
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
|
||||
0, 5, BOOKE_PAGESZ_64M, 1),
|
||||
|
||||
/*
|
||||
* TLB 6: 64M Cacheable, non-guarded
|
||||
* 0xf000_0000 64M LBC SDRAM
|
||||
*/
|
||||
SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE,
|
||||
MAS3_SX|MAS3_SW|MAS3_SR, 0,
|
||||
0, 6, BOOKE_PAGESZ_64M, 1),
|
||||
|
||||
#if !defined(CONFIG_SPD_EEPROM)
|
||||
/*
|
||||
* TLB 7: 256M DDR
|
||||
* 0x00000000 256M DDR System memory
|
||||
* Without SPD EEPROM configured DDR, this must be setup manually.
|
||||
* Make sure the TLB count at the top of this table is correct.
|
||||
* Likely it needs to be increased by two for these entries.
|
||||
*/
|
||||
|
||||
SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
|
||||
MAS3_SX|MAS3_SW|MAS3_SR, 0,
|
||||
0, 7, BOOKE_PAGESZ_256M, 1),
|
||||
#endif
|
||||
};
|
||||
|
||||
int num_tlb_entries = ARRAY_SIZE(tlb_table);
|
||||
|
|
@ -441,8 +441,6 @@ MVBLM7 powerpc mpc83xx mvblm7 matrix_
|
|||
SIMPC8313_LP powerpc mpc83xx simpc8313 sheldon - SIMPC8313:NAND_LP
|
||||
SIMPC8313_SP powerpc mpc83xx simpc8313 sheldon - SIMPC8313:NAND_SP
|
||||
TQM834x powerpc mpc83xx tqm834x tqc
|
||||
PM854 powerpc mpc85xx pm854
|
||||
PM856 powerpc mpc85xx pm856
|
||||
sbc8540 powerpc mpc85xx sbc8560 - - SBC8540
|
||||
sbc8540_33 powerpc mpc85xx sbc8560 - - SBC8540
|
||||
sbc8540_66 powerpc mpc85xx sbc8560 - - SBC8540
|
||||
|
|
|
|||
|
|
@ -1,426 +0,0 @@
|
|||
/*
|
||||
* Copyright 2004 Freescale Semiconductor.
|
||||
* (C) Copyright 2002,2003 Motorola,Inc.
|
||||
* Xianghua Xiao <X.Xiao@motorola.com>
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
/*
|
||||
* pm854 board configuration file
|
||||
*
|
||||
* Please refer to doc/README.mpc85xx for more info.
|
||||
*
|
||||
* Make sure you change the MAC address and other network params first,
|
||||
* search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file.
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
/* High Level Configuration Options */
|
||||
#define CONFIG_BOOKE 1 /* BOOKE */
|
||||
#define CONFIG_E500 1 /* BOOKE e500 family */
|
||||
#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */
|
||||
#define CONFIG_MPC8540 1 /* MPC8540 specific */
|
||||
#define CONFIG_PM854 1 /* PM854 board specific */
|
||||
|
||||
#define CONFIG_SYS_TEXT_BASE 0xfff80000
|
||||
|
||||
#define CONFIG_PCI
|
||||
#define CONFIG_TSEC_ENET /* tsec ethernet support */
|
||||
#define CONFIG_ENV_OVERWRITE
|
||||
|
||||
#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
|
||||
|
||||
/*
|
||||
* sysclk for MPC85xx
|
||||
*
|
||||
* Two valid values are:
|
||||
* 33000000
|
||||
* 66000000
|
||||
*
|
||||
* Most PCI cards are still 33Mhz, so in the presence of PCI, 33MHz
|
||||
* is likely the desired value here, so that is now the default.
|
||||
* The board, however, can run at 66MHz. In any event, this value
|
||||
* must match the settings of some switches. Details can be found
|
||||
* in the README.mpc85xxads.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_SYS_CLK_FREQ
|
||||
#define CONFIG_SYS_CLK_FREQ 66000000
|
||||
#endif
|
||||
|
||||
|
||||
/*
|
||||
* These can be toggled for performance analysis, otherwise use default.
|
||||
*/
|
||||
#define CONFIG_L2_CACHE /* toggle L2 cache */
|
||||
#define CONFIG_BTB /* toggle branch predition */
|
||||
|
||||
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
|
||||
|
||||
#undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */
|
||||
#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */
|
||||
#define CONFIG_SYS_MEMTEST_END 0x00400000
|
||||
|
||||
|
||||
/*
|
||||
* Base addresses -- Note these are effective addresses where the
|
||||
* actual resources get mapped (not physical addresses)
|
||||
*/
|
||||
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
|
||||
#define CONFIG_SYS_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
|
||||
#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
|
||||
#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
|
||||
|
||||
|
||||
/* DDR Setup */
|
||||
#define CONFIG_FSL_DDR1
|
||||
#undef CONFIG_FSL_DDR_INTERACTIVE
|
||||
#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
|
||||
#undef CONFIG_DDR_SPD
|
||||
#define CONFIG_DDR_DLL /* possible DLL fix needed */
|
||||
#define CONFIG_DDR_ECC /* only for ECC DDR module */
|
||||
#define CONFIG_FSL_DMA /* use DMA to init DDR ECC */
|
||||
|
||||
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
|
||||
|
||||
#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
|
||||
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
|
||||
#define CONFIG_VERY_BIG_RAM
|
||||
|
||||
#define CONFIG_NUM_DDR_CONTROLLERS 1
|
||||
#define CONFIG_DIMM_SLOTS_PER_CTLR 1
|
||||
#define CONFIG_CHIP_SELECTS_PER_CTRL 2
|
||||
|
||||
/* I2C addresses of SPD EEPROMs */
|
||||
#define SPD_EEPROM_ADDRESS 0x58 /* CTLR 0 DIMM 0 */
|
||||
|
||||
/* Manually set up DDR parameters */
|
||||
#define CONFIG_SYS_SDRAM_SIZE 256 /* DDR is 256 MB */
|
||||
#define CONFIG_SYS_DDR_CS0_BNDS 0x0000000f /* 0-256MB */
|
||||
#define CONFIG_SYS_DDR_CS0_CONFIG 0x80000102
|
||||
#define CONFIG_SYS_DDR_TIMING_1 0x47444321
|
||||
#define CONFIG_SYS_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning */
|
||||
#define CONFIG_SYS_DDR_CONTROL 0xc2008000 /* unbuffered,no DYN_PWR */
|
||||
#define CONFIG_SYS_DDR_MODE 0x00000062 /* DLL,normal,seq,4/2.5 */
|
||||
#define CONFIG_SYS_DDR_INTERVAL 0x045b0100 /* autocharge,no open page */
|
||||
|
||||
/*
|
||||
* SDRAM on the Local Bus
|
||||
*/
|
||||
#define CONFIG_SYS_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */
|
||||
#define CONFIG_SYS_LBC_SDRAM_SIZE 0 /* LBC SDRAM is 0 MB */
|
||||
|
||||
#define CONFIG_SYS_FLASH_BASE 0xfe000000 /* start of 32 MB FLASH */
|
||||
#define CONFIG_SYS_BR0_PRELIM 0xfe001801 /* port size 32bit */
|
||||
|
||||
#define CONFIG_SYS_OR0_PRELIM 0xfe006f67 /* 32 MB Flash */
|
||||
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
|
||||
#define CONFIG_SYS_MAX_FLASH_SECT 128 /* sectors per device */
|
||||
#undef CONFIG_SYS_FLASH_CHECKSUM
|
||||
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
|
||||
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
|
||||
|
||||
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
|
||||
|
||||
|
||||
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
|
||||
#define CONFIG_SYS_RAMBOOT
|
||||
#else
|
||||
#undef CONFIG_SYS_RAMBOOT
|
||||
#endif
|
||||
|
||||
#define CONFIG_FLASH_CFI_DRIVER
|
||||
#define CONFIG_SYS_FLASH_CFI
|
||||
#define CONFIG_SYS_FLASH_EMPTY_INFO
|
||||
|
||||
#undef CONFIG_CLOCKS_IN_MHZ
|
||||
|
||||
/*
|
||||
* Local Bus Definitions
|
||||
*/
|
||||
#define CONFIG_SYS_LBC_LCRR 0x00030004 /* LB clock ratio reg */
|
||||
#define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */
|
||||
#define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */
|
||||
#define CONFIG_SYS_LBC_MRTPR 0x20000000 /* LB refresh timer prescal*/
|
||||
|
||||
|
||||
#define CONFIG_SYS_INIT_RAM_LOCK 1
|
||||
#define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
|
||||
#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */
|
||||
|
||||
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
||||
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
||||
|
||||
#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */
|
||||
#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
|
||||
|
||||
/* Serial Port */
|
||||
#define CONFIG_CONS_INDEX 1
|
||||
#define CONFIG_SYS_NS16550
|
||||
#define CONFIG_SYS_NS16550_SERIAL
|
||||
#define CONFIG_SYS_NS16550_REG_SIZE 1
|
||||
#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
|
||||
|
||||
#define CONFIG_SYS_BAUDRATE_TABLE \
|
||||
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
|
||||
|
||||
#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
|
||||
#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
|
||||
|
||||
/* Use the HUSH parser */
|
||||
#define CONFIG_SYS_HUSH_PARSER
|
||||
#ifdef CONFIG_SYS_HUSH_PARSER
|
||||
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
|
||||
#endif
|
||||
|
||||
/*
|
||||
* I2C
|
||||
*/
|
||||
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
|
||||
#define CONFIG_HARD_I2C /* I2C with hardware support*/
|
||||
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
|
||||
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
|
||||
#define CONFIG_SYS_I2C_SLAVE 0x7F
|
||||
#define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */
|
||||
#define CONFIG_SYS_I2C_OFFSET 0x3000
|
||||
|
||||
/*
|
||||
* EEPROM configuration
|
||||
*/
|
||||
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x58
|
||||
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
|
||||
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
|
||||
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
|
||||
|
||||
/*
|
||||
* RTC configuration
|
||||
*/
|
||||
#define CONFIG_RTC_PCF8563
|
||||
#define CONFIG_SYS_I2C_RTC_ADDR 0x51
|
||||
|
||||
/* RapidIO MMU */
|
||||
#define CONFIG_SYS_RIO_MEM_BASE 0xc0000000 /* base address */
|
||||
#define CONFIG_SYS_RIO_MEM_PHYS CONFIG_SYS_RIO_MEM_BASE
|
||||
#define CONFIG_SYS_RIO_MEM_SIZE 0x20000000 /* 128M */
|
||||
|
||||
/*
|
||||
* General PCI
|
||||
* Addresses are mapped 1-1.
|
||||
*/
|
||||
#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000
|
||||
#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE
|
||||
#define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */
|
||||
#define CONFIG_SYS_PCI1_IO_BASE 0xe2000000
|
||||
#define CONFIG_SYS_PCI1_IO_PHYS CONFIG_SYS_PCI1_IO_BASE
|
||||
#define CONFIG_SYS_PCI1_IO_SIZE 0x1000000 /* 16M */
|
||||
|
||||
#if defined(CONFIG_PCI)
|
||||
|
||||
#define CONFIG_NET_MULTI
|
||||
#define CONFIG_PCI_PNP /* do pci plug-and-play */
|
||||
|
||||
#define CONFIG_EEPRO100
|
||||
#define CONFIG_E1000
|
||||
#undef CONFIG_TULIP
|
||||
|
||||
#if !defined(CONFIG_PCI_PNP)
|
||||
#define PCI_ENET0_IOADDR 0xe0000000
|
||||
#define PCI_ENET0_MEMADDR 0xe0000000
|
||||
#define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
|
||||
#endif
|
||||
|
||||
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
|
||||
#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
|
||||
|
||||
#endif /* CONFIG_PCI */
|
||||
|
||||
|
||||
#if defined(CONFIG_TSEC_ENET)
|
||||
|
||||
#ifndef CONFIG_NET_MULTI
|
||||
#define CONFIG_NET_MULTI 1
|
||||
#endif
|
||||
|
||||
#define CONFIG_MII 1 /* MII PHY management */
|
||||
#define CONFIG_TSEC1 1
|
||||
#define CONFIG_TSEC1_NAME "TSEC0"
|
||||
#define CONFIG_TSEC2 1
|
||||
#define CONFIG_TSEC2_NAME "TSEC1"
|
||||
#define TSEC1_PHY_ADDR 0
|
||||
#define TSEC2_PHY_ADDR 1
|
||||
#define TSEC1_PHYIDX 0
|
||||
#define TSEC2_PHYIDX 0
|
||||
#define TSEC1_FLAGS TSEC_GIGABIT
|
||||
#define TSEC2_FLAGS TSEC_GIGABIT
|
||||
|
||||
#define CONFIG_MPC85XX_FEC 1
|
||||
#define CONFIG_MPC85XX_FEC_NAME "FEC"
|
||||
#define FEC_PHY_ADDR 3
|
||||
#define FEC_PHYIDX 0
|
||||
#define FEC_FLAGS 0
|
||||
|
||||
/* Options are: TSEC[0-1] */
|
||||
#define CONFIG_ETHPRIME "TSEC0"
|
||||
|
||||
#define CONFIG_HAS_ETH0
|
||||
#define CONFIG_HAS_ETH1 1
|
||||
#define CONFIG_HAS_ETH2 1
|
||||
|
||||
#endif /* CONFIG_TSEC_ENET */
|
||||
|
||||
|
||||
/*
|
||||
* Environment
|
||||
*/
|
||||
#ifndef CONFIG_SYS_RAMBOOT
|
||||
#define CONFIG_ENV_IS_IN_FLASH 1
|
||||
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x80000)
|
||||
#define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
|
||||
#define CONFIG_ENV_SIZE 0x2000
|
||||
#else
|
||||
#define CONFIG_SYS_NO_FLASH 1 /* Flash is not usable now */
|
||||
#define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
|
||||
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
|
||||
#define CONFIG_ENV_SIZE 0x2000
|
||||
#endif
|
||||
|
||||
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
||||
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
||||
|
||||
|
||||
/*
|
||||
* BOOTP options
|
||||
*/
|
||||
#define CONFIG_BOOTP_BOOTFILESIZE
|
||||
#define CONFIG_BOOTP_BOOTPATH
|
||||
#define CONFIG_BOOTP_GATEWAY
|
||||
#define CONFIG_BOOTP_HOSTNAME
|
||||
|
||||
|
||||
/*
|
||||
* Command line configuration.
|
||||
*/
|
||||
#include <config_cmd_default.h>
|
||||
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_I2C
|
||||
#define CONFIG_CMD_MII
|
||||
#define CONFIG_CMD_DATE
|
||||
#define CONFIG_CMD_EEPROM
|
||||
#define CONFIG_CMD_REGINFO
|
||||
|
||||
#if defined(CONFIG_PCI)
|
||||
#define CONFIG_CMD_PCI
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SYS_RAMBOOT)
|
||||
#undef CONFIG_CMD_SAVEENV
|
||||
#undef CONFIG_CMD_LOADS
|
||||
#endif
|
||||
|
||||
|
||||
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
||||
|
||||
/*
|
||||
* Miscellaneous configurable options
|
||||
*/
|
||||
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
|
||||
#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
|
||||
|
||||
#if defined(CONFIG_CMD_KGDB)
|
||||
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||
#else
|
||||
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
#endif
|
||||
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
|
||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
||||
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
|
||||
#define CONFIG_LOOPW
|
||||
|
||||
/*
|
||||
* For booting Linux, the board info and command line data
|
||||
* have to be in the first 8 MB of memory, since this is
|
||||
* the maximum mapped by the Linux kernel during initialization.
|
||||
*/
|
||||
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
|
||||
|
||||
#if defined(CONFIG_CMD_KGDB)
|
||||
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
|
||||
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
|
||||
#endif
|
||||
|
||||
|
||||
/*
|
||||
* Environment Configuration
|
||||
*/
|
||||
|
||||
/* The mac addresses for all ethernet interface */
|
||||
#if defined(CONFIG_TSEC_ENET)
|
||||
#define CONFIG_ETHADDR 00:40:42:01:00:00
|
||||
#define CONFIG_ETH1ADDR 00:40:42:01:00:01
|
||||
#define CONFIG_ETH2ADDR 00:40:42:01:00:02
|
||||
#endif
|
||||
|
||||
|
||||
#define CONFIG_ROOTPATH /opt/eldk/ppc_85xx
|
||||
#define CONFIG_BOOTFILE pm854/uImage
|
||||
|
||||
#define CONFIG_HOSTNAME pm854
|
||||
#define CONFIG_IPADDR 192.168.0.103
|
||||
#define CONFIG_SERVERIP 192.168.0.64
|
||||
#define CONFIG_GATEWAYIP 192.168.0.1
|
||||
#define CONFIG_NETMASK 255.255.255.0
|
||||
|
||||
#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */
|
||||
|
||||
#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */
|
||||
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
|
||||
|
||||
#define CONFIG_BAUDRATE 9600
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"netdev=eth0\0" \
|
||||
"consoledev=ttyS0\0" \
|
||||
"ramdiskaddr=400000\0" \
|
||||
"ramdiskfile=pm854/uRamdisk\0"
|
||||
|
||||
#define CONFIG_NFSBOOTCOMMAND \
|
||||
"setenv bootargs root=/dev/nfs rw " \
|
||||
"nfsroot=$serverip:$rootpath " \
|
||||
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
|
||||
"console=$consoledev,$baudrate $othbootargs;" \
|
||||
"tftp $loadaddr $bootfile;" \
|
||||
"bootm $loadaddr"
|
||||
|
||||
#define CONFIG_RAMBOOTCOMMAND \
|
||||
"setenv bootargs root=/dev/ram rw " \
|
||||
"console=$consoledev,$baudrate $othbootargs;" \
|
||||
"tftp $ramdiskaddr $ramdiskfile;" \
|
||||
"tftp $loadaddr $bootfile;" \
|
||||
"bootm $loadaddr $ramdiskaddr"
|
||||
|
||||
#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
|
|
@ -1,429 +0,0 @@
|
|||
/*
|
||||
* Copyright 2004 Freescale Semiconductor.
|
||||
* (C) Copyright 2002,2003 Motorola,Inc.
|
||||
* Xianghua Xiao <X.Xiao@motorola.com>
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
/*
|
||||
* MicroSys PM856 board configuration file
|
||||
*
|
||||
* Please refer to doc/README.mpc85xx for more info.
|
||||
*
|
||||
* Make sure you change the MAC address and other network params first,
|
||||
* search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file.
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
/* High Level Configuration Options */
|
||||
#define CONFIG_BOOKE 1 /* BOOKE */
|
||||
#define CONFIG_E500 1 /* BOOKE e500 family */
|
||||
#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */
|
||||
#define CONFIG_MPC8560 1 /* MPC8560 specific */
|
||||
#define CONFIG_CPM2 1 /* Has a CPM2 */
|
||||
#define CONFIG_PM856 1 /* PM856 board specific */
|
||||
|
||||
#define CONFIG_SYS_TEXT_BASE 0xfff80000
|
||||
|
||||
#define CONFIG_PCI
|
||||
#define CONFIG_TSEC_ENET /* tsec ethernet support */
|
||||
#define CONFIG_ENV_OVERWRITE
|
||||
|
||||
#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
|
||||
|
||||
/*
|
||||
* sysclk for MPC85xx
|
||||
*
|
||||
* Two valid values are:
|
||||
* 33000000
|
||||
* 66000000
|
||||
*
|
||||
* Most PCI cards are still 33Mhz, so in the presence of PCI, 33MHz
|
||||
* is likely the desired value here, so that is now the default.
|
||||
* The board, however, can run at 66MHz. In any event, this value
|
||||
* must match the settings of some switches. Details can be found
|
||||
* in the README.mpc85xxads.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_SYS_CLK_FREQ
|
||||
#define CONFIG_SYS_CLK_FREQ 66000000
|
||||
#endif
|
||||
|
||||
|
||||
/*
|
||||
* These can be toggled for performance analysis, otherwise use default.
|
||||
*/
|
||||
#define CONFIG_L2_CACHE /* toggle L2 cache */
|
||||
#define CONFIG_BTB /* toggle branch predition */
|
||||
|
||||
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
|
||||
|
||||
#define CONFIG_SYS_INIT_DBCR DBCR_IDM /* Enable Debug Exceptions */
|
||||
|
||||
#undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */
|
||||
#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */
|
||||
#define CONFIG_SYS_MEMTEST_END 0x00400000
|
||||
|
||||
|
||||
/*
|
||||
* Base addresses -- Note these are effective addresses where the
|
||||
* actual resources get mapped (not physical addresses)
|
||||
*/
|
||||
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
|
||||
#define CONFIG_SYS_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
|
||||
#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
|
||||
#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
|
||||
|
||||
/* DDR Setup */
|
||||
#define CONFIG_FSL_DDR1
|
||||
#undef CONFIG_FSL_DDR_INTERACTIVE
|
||||
#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
|
||||
#undef CONFIG_DDR_SPD
|
||||
#define CONFIG_DDR_DLL /* possible DLL fix needed */
|
||||
#define CONFIG_DDR_ECC /* only for ECC DDR module */
|
||||
#define CONFIG_FSL_DMA /* use DMA to init DDR ECC */
|
||||
|
||||
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
|
||||
|
||||
#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
|
||||
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
|
||||
#define CONFIG_VERY_BIG_RAM
|
||||
|
||||
#define CONFIG_NUM_DDR_CONTROLLERS 1
|
||||
#define CONFIG_DIMM_SLOTS_PER_CTLR 1
|
||||
#define CONFIG_CHIP_SELECTS_PER_CTRL 2
|
||||
|
||||
/* I2C addresses of SPD EEPROMs */
|
||||
#define SPD_EEPROM_ADDRESS 0x58 /* CTLR 0 DIMM 0 */
|
||||
|
||||
/* Manually set up DDR parameters */
|
||||
#define CONFIG_SYS_SDRAM_SIZE 256 /* DDR is 256 MB */
|
||||
#define CONFIG_SYS_DDR_CS0_BNDS 0x0000000f /* 0-256MB */
|
||||
#define CONFIG_SYS_DDR_CS0_CONFIG 0x80000102
|
||||
#define CONFIG_SYS_DDR_TIMING_1 0x47444321
|
||||
#define CONFIG_SYS_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning */
|
||||
#define CONFIG_SYS_DDR_CONTROL 0xc2008000 /* unbuffered,no DYN_PWR */
|
||||
#define CONFIG_SYS_DDR_MODE 0x00000062 /* DLL,normal,seq,4/2.5 */
|
||||
#define CONFIG_SYS_DDR_INTERVAL 0x045b0100 /* autocharge,no open page */
|
||||
|
||||
/*
|
||||
* SDRAM on the Local Bus
|
||||
*/
|
||||
#define CONFIG_SYS_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */
|
||||
#define CONFIG_SYS_LBC_SDRAM_SIZE 0 /* LBC SDRAM is 0 MB */
|
||||
|
||||
#define CONFIG_SYS_FLASH_BASE 0xfe000000 /* start of FLASH 32M */
|
||||
#define CONFIG_SYS_BR0_PRELIM 0xfe001801 /* port size 32bit */
|
||||
|
||||
#define CONFIG_SYS_OR0_PRELIM 0xfe006f67 /* 32MB Flash */
|
||||
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
|
||||
#define CONFIG_SYS_MAX_FLASH_SECT 128 /* sectors per device */
|
||||
#undef CONFIG_SYS_FLASH_CHECKSUM
|
||||
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
|
||||
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
|
||||
|
||||
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
|
||||
|
||||
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
|
||||
#define CONFIG_SYS_RAMBOOT
|
||||
#else
|
||||
#undef CONFIG_SYS_RAMBOOT
|
||||
#endif
|
||||
|
||||
#define CONFIG_FLASH_CFI_DRIVER
|
||||
#define CONFIG_SYS_FLASH_CFI
|
||||
#define CONFIG_SYS_FLASH_EMPTY_INFO
|
||||
|
||||
#undef CONFIG_CLOCKS_IN_MHZ
|
||||
|
||||
|
||||
/*
|
||||
* Local Bus Definitions
|
||||
*/
|
||||
|
||||
#define CONFIG_SYS_LBC_LCRR 0x00030004 /* LB clock ratio reg */
|
||||
#define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */
|
||||
#define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */
|
||||
#define CONFIG_SYS_LBC_MRTPR 0x20000000 /* LB refresh timer prescal*/
|
||||
|
||||
|
||||
#define CONFIG_SYS_INIT_RAM_LOCK 1
|
||||
#define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
|
||||
#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */
|
||||
|
||||
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
||||
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
||||
|
||||
#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */
|
||||
#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
|
||||
|
||||
/* Serial Port */
|
||||
#define CONFIG_CONS_ON_SCC /* define if console on SCC */
|
||||
#undef CONFIG_CONS_NONE /* define if console on something else */
|
||||
#define CONFIG_CONS_INDEX 1 /* which serial channel for console */
|
||||
|
||||
#define CONFIG_SYS_BAUDRATE_TABLE \
|
||||
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
|
||||
|
||||
/* Use the HUSH parser */
|
||||
#define CONFIG_SYS_HUSH_PARSER
|
||||
#ifdef CONFIG_SYS_HUSH_PARSER
|
||||
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
|
||||
#endif
|
||||
|
||||
/*
|
||||
* I2C
|
||||
*/
|
||||
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
|
||||
#define CONFIG_HARD_I2C /* I2C with hardware support*/
|
||||
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
|
||||
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
|
||||
#define CONFIG_SYS_I2C_SLAVE 0x7F
|
||||
#define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */
|
||||
#define CONFIG_SYS_I2C_OFFSET 0x3000
|
||||
|
||||
/*
|
||||
* EEPROM configuration
|
||||
*/
|
||||
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x58
|
||||
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
|
||||
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
|
||||
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
|
||||
|
||||
/*
|
||||
* RTC configuration
|
||||
*/
|
||||
#define CONFIG_RTC_PCF8563
|
||||
#define CONFIG_SYS_I2C_RTC_ADDR 0x51
|
||||
|
||||
/* RapidIO MMU */
|
||||
#define CONFIG_SYS_RIO_MEM_BASE 0xc0000000 /* base address */
|
||||
#define CONFIG_SYS_RIO_MEM_PHYS CONFIG_SYS_RIO_MEM_BASE
|
||||
#define CONFIG_SYS_RIO_MEM_SIZE 0x20000000 /* 128M */
|
||||
|
||||
/*
|
||||
* General PCI
|
||||
* Addresses are mapped 1-1.
|
||||
*/
|
||||
#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000
|
||||
#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE
|
||||
#define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */
|
||||
#define CONFIG_SYS_PCI1_IO_BASE 0xe2000000
|
||||
#define CONFIG_SYS_PCI1_IO_PHYS CONFIG_SYS_PCI1_IO_BASE
|
||||
#define CONFIG_SYS_PCI1_IO_SIZE 0x1000000 /* 16M */
|
||||
|
||||
#if defined(CONFIG_PCI)
|
||||
|
||||
#define CONFIG_NET_MULTI
|
||||
#define CONFIG_PCI_PNP /* do pci plug-and-play */
|
||||
|
||||
#undef CONFIG_EEPRO100
|
||||
#undef CONFIG_TULIP
|
||||
|
||||
#if !defined(CONFIG_PCI_PNP)
|
||||
#define PCI_ENET0_IOADDR 0xe0000000
|
||||
#define PCI_ENET0_MEMADDR 0xe0000000
|
||||
#define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
|
||||
#endif
|
||||
|
||||
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
|
||||
#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
|
||||
|
||||
#endif /* CONFIG_PCI */
|
||||
|
||||
|
||||
#if defined(CONFIG_TSEC_ENET)
|
||||
|
||||
#ifndef CONFIG_NET_MULTI
|
||||
#define CONFIG_NET_MULTI 1
|
||||
#endif
|
||||
|
||||
#define CONFIG_MII 1 /* MII PHY management */
|
||||
#define CONFIG_TSEC1 1
|
||||
#define CONFIG_TSEC1_NAME "TSEC0"
|
||||
#define CONFIG_TSEC2 1
|
||||
#define CONFIG_TSEC2_NAME "TSEC1"
|
||||
#define TSEC1_PHY_ADDR 0
|
||||
#define TSEC2_PHY_ADDR 1
|
||||
#define TSEC1_PHYIDX 0
|
||||
#define TSEC2_PHYIDX 0
|
||||
#define TSEC1_FLAGS TSEC_GIGABIT
|
||||
#define TSEC2_FLAGS TSEC_GIGABIT
|
||||
|
||||
#endif /* CONFIG_TSEC_ENET */
|
||||
|
||||
#define CONFIG_ETHPRIME "TSEC0"
|
||||
|
||||
#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */
|
||||
#undef CONFIG_ETHER_NONE /* define if ether on something else */
|
||||
|
||||
|
||||
/*
|
||||
* - Rx-CLK is CLK15
|
||||
* - Tx-CLK is CLK14
|
||||
* - Select bus for bd/buffers
|
||||
* - Full duplex
|
||||
*/
|
||||
#define CONFIG_ETHER_ON_FCC3
|
||||
#define CONFIG_SYS_CMXFCR_MASK3 (CMXFCR_FC3 | CMXFCR_RF3CS_MSK | CMXFCR_TF3CS_MSK)
|
||||
#define CONFIG_SYS_CMXFCR_VALUE3 (CMXFCR_RF3CS_CLK15 | CMXFCR_TF3CS_CLK14)
|
||||
#define CONFIG_SYS_CPMFCR_RAMTYPE 0
|
||||
#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE)
|
||||
|
||||
/*
|
||||
* Environment
|
||||
*/
|
||||
#ifndef CONFIG_SYS_RAMBOOT
|
||||
#define CONFIG_ENV_IS_IN_FLASH 1
|
||||
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x80000)
|
||||
#define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
|
||||
#define CONFIG_ENV_SIZE 0x2000
|
||||
#else
|
||||
#define CONFIG_SYS_NO_FLASH 1 /* Flash is not usable now */
|
||||
#define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
|
||||
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
|
||||
#define CONFIG_ENV_SIZE 0x2000
|
||||
#endif
|
||||
|
||||
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
||||
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
||||
|
||||
|
||||
/*
|
||||
* BOOTP options
|
||||
*/
|
||||
#define CONFIG_BOOTP_BOOTFILESIZE
|
||||
#define CONFIG_BOOTP_BOOTPATH
|
||||
#define CONFIG_BOOTP_GATEWAY
|
||||
#define CONFIG_BOOTP_HOSTNAME
|
||||
|
||||
|
||||
/*
|
||||
* Command line configuration.
|
||||
*/
|
||||
#include <config_cmd_default.h>
|
||||
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_I2C
|
||||
#define CONFIG_CMD_DATE
|
||||
#define CONFIG_CMD_EEPROM
|
||||
#define CONFIG_CMD_REGINFO
|
||||
|
||||
#if defined(CONFIG_PCI)
|
||||
#define CONFIG_CMD_PCI
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SYS_RAMBOOT)
|
||||
#undef CONFIG_CMD_SAVEENV
|
||||
#undef CONFIG_CMD_LOADS
|
||||
#endif
|
||||
|
||||
|
||||
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
||||
|
||||
/*
|
||||
* Miscellaneous configurable options
|
||||
*/
|
||||
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default load address */
|
||||
#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
|
||||
|
||||
#if defined(CONFIG_CMD_KGDB)
|
||||
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||
#else
|
||||
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
#endif
|
||||
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
|
||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
||||
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
|
||||
#define CONFIG_LOOPW
|
||||
|
||||
/*
|
||||
* For booting Linux, the board info and command line data
|
||||
* have to be in the first 8 MB of memory, since this is
|
||||
* the maximum mapped by the Linux kernel during initialization.
|
||||
*/
|
||||
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
|
||||
|
||||
#if defined(CONFIG_CMD_KGDB)
|
||||
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
|
||||
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
|
||||
#endif
|
||||
|
||||
|
||||
/*
|
||||
* Environment Configuration
|
||||
*/
|
||||
|
||||
/* The mac addresses for all ethernet interface */
|
||||
#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
|
||||
#define CONFIG_HAS_ETH0
|
||||
#define CONFIG_ETHADDR 00:40:42:01:00:00
|
||||
#define CONFIG_HAS_ETH1
|
||||
#define CONFIG_ETH1ADDR 00:40:42:01:00:01
|
||||
#define CONFIG_HAS_ETH2
|
||||
#define CONFIG_ETH2ADDR 00:40:42:01:00:02
|
||||
#endif
|
||||
|
||||
|
||||
#define CONFIG_ROOTPATH /opt/eldk/ppc_85xx
|
||||
#define CONFIG_BOOTFILE pm856/uImage
|
||||
|
||||
#define CONFIG_HOSTNAME pm856
|
||||
#define CONFIG_IPADDR 192.168.0.103
|
||||
#define CONFIG_SERVERIP 192.168.0.64
|
||||
#define CONFIG_GATEWAYIP 192.168.0.1
|
||||
#define CONFIG_NETMASK 255.255.255.0
|
||||
|
||||
#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */
|
||||
|
||||
#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */
|
||||
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
|
||||
|
||||
#define CONFIG_BAUDRATE 9600
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"netdev=eth0\0" \
|
||||
"consoledev=ttyS0\0" \
|
||||
"ramdiskaddr=400000\0" \
|
||||
"ramdiskfile=pm856/uRamdisk\0"
|
||||
|
||||
#define CONFIG_NFSBOOTCOMMAND \
|
||||
"setenv bootargs root=/dev/nfs rw " \
|
||||
"nfsroot=$serverip:$rootpath " \
|
||||
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
|
||||
"console=$consoledev,$baudrate $othbootargs;" \
|
||||
"tftp $loadaddr $bootfile;" \
|
||||
"bootm $loadaddr"
|
||||
|
||||
#define CONFIG_RAMBOOTCOMMAND \
|
||||
"setenv bootargs root=/dev/ram rw " \
|
||||
"console=$consoledev,$baudrate $othbootargs;" \
|
||||
"tftp $ramdiskaddr $ramdiskfile;" \
|
||||
"tftp $loadaddr $bootfile;" \
|
||||
"bootm $loadaddr $ramdiskaddr"
|
||||
|
||||
#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
Loading…
Reference in a new issue