sh: rsk7203: Remove the board

Last change to this board was done in 2016, has no prospects of
ever being converted to DM, drop it.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Chris Brandt <chris.brandt@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>
This commit is contained in:
Marek Vasut 2019-05-07 21:49:16 +02:00 committed by Marek Vasut
parent 10e91cfdb0
commit 5736453c6f
8 changed files with 0 additions and 387 deletions

View file

@ -31,10 +31,6 @@ choice
prompt "Target select"
optional
config TARGET_RSK7203
bool "RSK+ 7203"
select CPU_SH2A
config TARGET_RSK7264
bool "RSK2+SH7264"
select CPU_SH2A
@ -130,7 +126,6 @@ source "board/renesas/ap325rxa/Kconfig"
source "board/renesas/r0p7734/Kconfig"
source "board/renesas/r2dplus/Kconfig"
source "board/renesas/r7780mp/Kconfig"
source "board/renesas/rsk7203/Kconfig"
source "board/renesas/rsk7264/Kconfig"
source "board/renesas/rsk7269/Kconfig"
source "board/renesas/sh7752evb/Kconfig"

View file

@ -1,12 +0,0 @@
if TARGET_RSK7203
config SYS_BOARD
default "rsk7203"
config SYS_VENDOR
default "renesas"
config SYS_CONFIG_NAME
default "rsk7203"
endif

View file

@ -1,7 +0,0 @@
RSK7203 BOARD
M: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
M: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
S: Maintained
F: board/renesas/rsk7203/
F: include/configs/rsk7203.h
F: configs/rsk7203_defconfig

View file

@ -1,10 +0,0 @@
# SPDX-License-Identifier: GPL-2.0+
#
# Copyright (C) 2007,2008 Nobuhiro Iwamatsu
# Copyright (C) 2008 Renesas Solutions Corp.
#
# u-boot/board/rsk7203/Makefile
#
obj-y := rsk7203.o
extra-y += lowlevel_init.o

View file

@ -1,199 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2008 Nobuhiro Iwamatsu
* Copyright (C) 2008 Renesas Solutions Corp.
*/
#include <config.h>
#include <asm/processor.h>
#include <asm/macro.h>
.global lowlevel_init
.text
.align 2
lowlevel_init:
/* Cache setting */
write32 CCR1_A ,CCR1_D
/* ConfigurePortPins */
write16 PECRL3_A, PECRL3_D
write16 PCCRL4_A, PCCRL4_D0
write16 PECRL4_A, PECRL4_D0
write16 PEIORL_A, PEIORL_D0
write16 PCIORL_A, PCIORL_D
write16 PFCRH2_A, PFCRH2_D
write16 PFCRH3_A, PFCRH3_D
write16 PFCRH1_A, PFCRH1_D
write16 PFIORH_A, PFIORH_D
write16 PECRL1_A, PECRL1_D0
write16 PEIORL_A, PEIORL_D1
/* Configure Operating Frequency */
write16 WTCSR_A, WTCSR_D0
write16 WTCSR_A, WTCSR_D1
write16 WTCNT_A, WTCNT_D
/* Set clock mode*/
write16 FRQCR_A, FRQCR_D
/* Configure Bus And Memory */
init_bsc_cs0:
write16 PCCRL4_A, PCCRL4_D1
write16 PECRL1_A, PECRL1_D1
write32 CMNCR_A, CMNCR_D
write32 CS0BCR_A, CS0BCR_D
write32 CS0WCR_A, CS0WCR_D
init_bsc_cs1:
write16 PECRL4_A, PECRL4_D1
write32 CS1WCR_A, CS1WCR_D
init_sdram:
write16 PCCRL2_A, PCCRL2_D
write16 PCCRL4_A, PCCRL4_D2
write16 PCCRL1_A, PCCRL1_D
write16 PCCRL3_A, PCCRL3_D
write32 CS3BCR_A, CS3BCR_D
write32 CS3WCR_A, CS3WCR_D
write32 SDCR_A, SDCR_D
write32 RTCOR_A, RTCOR_D
write32 RTCSR_A, RTCSR_D
/* wait 200us */
mov.l REPEAT_D, r3
mov #0, r2
repeat0:
add #1, r2
cmp/hs r3, r2
bf repeat0
nop
mov.l SDRAM_MODE, r1
mov #0, r0
mov.l r0, @r1
nop
rts
.align 4
CCR1_A: .long CCR1
CCR1_D: .long 0x0000090B
PCCRL4_A: .long 0xFFFE3910
PCCRL4_D0: .word 0x0000
.align 2
PECRL4_A: .long 0xFFFE3A10
PECRL4_D0: .word 0x0000
.align 2
PECRL3_A: .long 0xFFFE3A12
PECRL3_D: .word 0x0000
.align 2
PEIORL_A: .long 0xFFFE3A06
PEIORL_D0: .word 0x1C00
PEIORL_D1: .word 0x1C02
PCIORL_A: .long 0xFFFE3906
PCIORL_D: .word 0x4000
.align 2
PFCRH2_A: .long 0xFFFE3A8C
PFCRH2_D: .word 0x0000
.align 2
PFCRH3_A: .long 0xFFFE3A8A
PFCRH3_D: .word 0x0000
.align 2
PFCRH1_A: .long 0xFFFE3A8E
PFCRH1_D: .word 0x0000
.align 2
PFIORH_A: .long 0xFFFE3A84
PFIORH_D: .word 0x0729
.align 2
PECRL1_A: .long 0xFFFE3A16
PECRL1_D0: .word 0x0033
.align 2
WTCSR_A: .long 0xFFFE0000
WTCSR_D0: .word 0xA518
WTCSR_D1: .word 0xA51D
WTCNT_A: .long 0xFFFE0002
WTCNT_D: .word 0x5A84
.align 2
FRQCR_A: .long 0xFFFE0010
FRQCR_D: .word 0x0104
.align 2
PCCRL4_D1: .word 0x0010
PECRL1_D1: .word 0x0133
CMNCR_A: .long 0xFFFC0000
CMNCR_D: .long 0x00001810
CS0BCR_A: .long 0xFFFC0004
CS0BCR_D: .long 0x10000400
CS0WCR_A: .long 0xFFFC0028
CS0WCR_D: .long 0x00000B41
PECRL4_D1: .word 0x0100
.align 2
CS1WCR_A: .long 0xFFFC002C
CS1WCR_D: .long 0x00000B01
PCCRL4_D2: .word 0x0011
.align 2
PCCRL3_A: .long 0xFFFE3912
PCCRL3_D: .word 0x0011
.align 2
PCCRL2_A: .long 0xFFFE3914
PCCRL2_D: .word 0x1111
.align 2
PCCRL1_A: .long 0xFFFE3916
PCCRL1_D: .word 0x1010
.align 2
PDCRL4_A: .long 0xFFFE3990
PDCRL4_D: .word 0x0011
.align 2
PDCRL3_A: .long 0xFFFE3992
PDCRL3_D: .word 0x00011
.align 2
PDCRL2_A: .long 0xFFFE3994
PDCRL2_D: .word 0x1111
.align 2
PDCRL1_A: .long 0xFFFE3996
PDCRL1_D: .word 0x1000
.align 2
CS3BCR_A: .long 0xFFFC0010
CS3BCR_D: .long 0x00004400
CS3WCR_A: .long 0xFFFC0034
CS3WCR_D: .long 0x00002892
SDCR_A: .long 0xFFFC004C
SDCR_D: .long 0x00000809
RTCOR_A: .long 0xFFFC0058
RTCOR_D: .long 0xA55A0041
RTCSR_A: .long 0xFFFC0050
RTCSR_D: .long 0xa55a0010
SDRAM_MODE: .long 0xFFFC5040
REPEAT_D: .long 0x00009C40

View file

@ -1,59 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2008 Nobuhiro Iwamatsu
* Copyright (C) 2008 Renesas Solutions Corp.
*
* u-boot/board/rsk7203/rsk7203.c
*/
#include <common.h>
#include <net.h>
#include <netdev.h>
#include <asm/io.h>
#include <asm/processor.h>
int checkboard(void)
{
puts("BOARD: Renesas Technology RSK7203\n");
return 0;
}
int board_init(void)
{
return 0;
}
void led_set_state(unsigned short value)
{
}
/*
* The RSK board has the SMSC9118 wired up 'incorrectly'.
* Byte-swapping is necessary, and so poor performance is inevitable.
* This problem cannot evade by the swap function of CHIP, this can
* evade by software Byte-swapping.
* And this has problem by FIFO access only. pkt_data_pull/pkt_data_push
* functions necessary to solve this problem.
*/
u32 pkt_data_pull(struct eth_device *dev, u32 addr)
{
volatile u16 *addr_16 = (u16 *)(dev->iobase + addr);
return (u32)((swab16(*addr_16) << 16) & 0xFFFF0000)\
| swab16(*(addr_16 + 1));
}
void pkt_data_push(struct eth_device *dev, u32 addr, u32 val)
{
addr += dev->iobase;
*(volatile u16 *)(addr + 2) = swab16((u16)val);
*(volatile u16 *)(addr) = swab16((u16)(val >> 16));
}
int board_eth_init(bd_t *bis)
{
int rc = 0;
#ifdef CONFIG_SMC911X
rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
#endif
return rc;
}

View file

@ -1,32 +0,0 @@
CONFIG_SH=y
CONFIG_SYS_TEXT_BASE=0xC7C0000
CONFIG_TARGET_RSK7203=y
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttySC0,115200"
CONFIG_VERSION_VARIABLE=y
# CONFIG_CMDLINE_EDITING is not set
# CONFIG_AUTO_COMPLETE is not set
# CONFIG_AUTOBOOT is not set
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_CONSOLE is not set
# CONFIG_CMD_BOOTD is not set
# CONFIG_CMD_RUN is not set
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_EDITENV is not set
# CONFIG_CMD_ENV_EXISTS is not set
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_SDRAM=y
# CONFIG_CMD_ECHO is not set
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SOURCE is not set
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
# CONFIG_CMD_MISC is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_SCIF_CONSOLE=y
CONFIG_USE_PRIVATE_LIBGCC=y

View file

@ -1,63 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Configuation settings for the Renesas Technology RSK 7203
*
* Copyright (C) 2008 Nobuhiro Iwamatsu
* Copyright (C) 2008 Renesas Solutions Corp.
*/
#ifndef __RSK7203_H
#define __RSK7203_H
#define CONFIG_CPU_SH7203 1
#define CONFIG_LOADADDR 0x0C100000 /* RSK7203_SDRAM_BASE + 1MB */
#define CONFIG_DISPLAY_BOARDINFO
#undef CONFIG_SHOW_BOOT_PROGRESS
/* MEMORY */
#define RSK7203_SDRAM_BASE 0x0C000000
#define RSK7203_FLASH_BASE_1 0x20000000 /* Non cache */
#define RSK7203_FLASH_BANK_SIZE (4 * 1024 * 1024)
/* List of legal baudrate settings for this board */
#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
/* SCIF */
#define CONFIG_CONS_SCIF0 1
#define CONFIG_SYS_MEMTEST_START RSK7203_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (3 * 1024 * 1024))
#define CONFIG_SYS_SDRAM_BASE RSK7203_SDRAM_BASE
#define CONFIG_SYS_SDRAM_SIZE (32 * 1024 * 1024)
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 1024 * 1024)
#define CONFIG_SYS_MONITOR_BASE RSK7203_FLASH_BASE_1
#define CONFIG_SYS_MONITOR_LEN (128 * 1024)
#define CONFIG_SYS_MALLOC_LEN (256 * 1024)
#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
/* FLASH */
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
#undef CONFIG_SYS_FLASH_QUIET_TEST
#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
#define CONFIG_SYS_FLASH_BASE RSK7203_FLASH_BASE_1
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
#define CONFIG_SYS_MAX_FLASH_SECT 64
#define CONFIG_SYS_MAX_FLASH_BANKS 1
#define CONFIG_ENV_SECT_SIZE (64 * 1024)
#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
#define CONFIG_SYS_FLASH_ERASE_TOUT 12000
#define CONFIG_SYS_FLASH_WRITE_TOUT 500
/* Board Clock */
#define CONFIG_SYS_CLK_FREQ 33333333
#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CMT_CLK_DIVIDER 32 /* 8 (default), 32, 128 or 512 */
#define CONFIG_SH_CMT_CLK_FREQ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
#endif /* __RSK7203_H */