[PCS440EP] upgrade the PCS440EP board:

- Show on the Status LEDs, some States of the board.
                - Get the MAC addresses from the EEProm
                - use PREBOOT
                - use the CF on the board.
                - check the U-Boot image in the Flash with a SHA1
                  checksum.
                - use dynamic TLB entries generation for the SDRAM

Signed-off-by: Heiko Schocher <hs@denx.de>

Makefile

@@ -245,7 +245,7 @@ __LIBS := $(subst $(obj),,$(LIBS))
 #########################################################################
 #########################################################################
 
-ALL = $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND)
+ALL += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND)
 
 all:		$(ALL)
 
@@ -265,6 +265,9 @@ $(obj)u-boot.img:	$(obj)u-boot.bin
 			sed -e 's/"[	 ]*$$/ for $(BOARD) board"/') \
 		-d $< $@
 
+$(obj)u-boot.sha1:	$(obj)u-boot.bin
+		./tools/ubsha1 $(obj)u-boot.bin
+
 $(obj)u-boot.dis:	$(obj)u-boot
 		$(OBJDUMP) -d $< > $@
 
@@ -2455,7 +2458,7 @@ clean:
 	      $(obj)examples/smc91111_eeprom $(obj)examples/interrupt \
 	      $(obj)examples/test_burst
 	rm -f $(obj)tools/img2srec $(obj)tools/mkimage $(obj)tools/envcrc \
-		$(obj)tools/gen_eth_addr
+		$(obj)tools/gen_eth_addr $(obj)tools/ubsha1
 	rm -f $(obj)tools/mpc86x_clk $(obj)tools/ncb
 	rm -f $(obj)tools/easylogo/easylogo $(obj)tools/bmp_logo
 	rm -f $(obj)tools/gdb/astest $(obj)tools/gdb/gdbcont $(obj)tools/gdb/gdbsend
@@ -2478,7 +2481,7 @@ clobber:	clean
 	rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS $(obj)include/version_autogenerated.h
 	rm -fr $(obj)*.*~
 	rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)
-	rm -f $(obj)tools/crc32.c $(obj)tools/environment.c $(obj)tools/env/crc32.c
+	rm -f $(obj)tools/crc32.c $(obj)tools/environment.c $(obj)tools/env/crc32.c $(obj)tools/sha1.c
 	rm -f $(obj)tools/inca-swap-bytes $(obj)cpu/mpc824x/bedbug_603e.c
 	rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
 	[ ! -d $(OBJTREE)/nand_spl ] || find $(obj)nand_spl -lname "*" -print | xargs rm -f

README

@@ -1699,28 +1699,69 @@ The following options need to be configured:
   -31	post/post.c		POST test failed, detected by post_output_backlog()
   -32	post/post.c		POST test failed, detected by post_run_single()
 
-   -1	common/cmd_doc.c	Bad usage of "doc" command
+   34	common/cmd_doc.c	before loading a Image from a DOC device
-   -1	common/cmd_doc.c	No boot device
+  -35	common/cmd_doc.c	Bad usage of "doc" command
-   -1	common/cmd_doc.c	Unknown Chip ID on boot device
+   35	common/cmd_doc.c	correct usage of "doc" command
-   -1	common/cmd_doc.c	Read Error on boot device
+  -36	common/cmd_doc.c	No boot device
-   -1	common/cmd_doc.c	Image header has bad magic number
+   36	common/cmd_doc.c	correct boot device
+  -37	common/cmd_doc.c	Unknown Chip ID on boot device
+   37	common/cmd_doc.c	correct chip ID found, device available
+  -38	common/cmd_doc.c	Read Error on boot device
+   38	common/cmd_doc.c	reading Image header from DOC device OK
+  -39	common/cmd_doc.c	Image header has bad magic number
+   39	common/cmd_doc.c	Image header has correct magic number
+  -40	common/cmd_doc.c	Error reading Image from DOC device
+   40	common/cmd_doc.c	Image header has correct magic number
+   41	common/cmd_ide.c	before loading a Image from a IDE device
+  -42	common/cmd_ide.c	Bad usage of "ide" command
+   42	common/cmd_ide.c	correct usage of "ide" command
+  -43	common/cmd_ide.c	No boot device
+   43	common/cmd_ide.c	boot device found
+  -44	common/cmd_ide.c	Device not available
+   44	common/cmd_ide.c	Device available
+  -45	common/cmd_ide.c	wrong partition selected
+   45	common/cmd_ide.c	partition selected
+  -46	common/cmd_ide.c	Unknown partition table
+   46	common/cmd_ide.c	valid partition table found
+  -47	common/cmd_ide.c	Invalid partition type
+   47	common/cmd_ide.c	correct partition type
+  -48	common/cmd_ide.c	Error reading Image Header on boot device
+   48	common/cmd_ide.c	reading Image Header from IDE device OK
+  -49	common/cmd_ide.c	Image header has bad magic number
+   49	common/cmd_ide.c	Image header has correct magic number
+  -50	common/cmd_ide.c	Image header has bad	 checksum
+   50	common/cmd_ide.c	Image header has correct checksum
+  -51	common/cmd_ide.c	Error reading Image from IDE device
+   51	common/cmd_ide.c	reading Image from IDE device OK
+   52	common/cmd_nand.c	before loading a Image from a NAND device
+  -53	common/cmd_nand.c	Bad usage of "nand" command
+   53	common/cmd_nand.c	correct usage of "nand" command
+  -54	common/cmd_nand.c	No boot device
+   54	common/cmd_nand.c	boot device found
+  -55	common/cmd_nand.c	Unknown Chip ID on boot device
+   55	common/cmd_nand.c	correct chip ID found, device available
+  -56	common/cmd_nand.c	Error reading Image Header on boot device
+   56	common/cmd_nand.c	reading Image Header from NAND device OK
+  -57	common/cmd_nand.c	Image header has bad magic number
+   57	common/cmd_nand.c	Image header has correct magic number
+  -58	common/cmd_nand.c	Error reading Image from NAND device
+   58	common/cmd_nand.c	reading Image from NAND device OK
 
-   -1	common/cmd_ide.c	Bad usage of "ide" command
+  -60	common/env_common.c	Environment has a bad CRC, using default
-   -1	common/cmd_ide.c	No boot device
-   -1	common/cmd_ide.c	Unknown boot device
-   -1	common/cmd_ide.c	Unknown partition table
-   -1	common/cmd_ide.c	Invalid partition type
-   -1	common/cmd_ide.c	Read Error on boot device
-   -1	common/cmd_ide.c	Image header has bad magic number
 
-   -1	common/cmd_nand.c	Bad usage of "nand" command
+   64	net/eth.c		starting with Ethernetconfiguration.
-   -1	common/cmd_nand.c	No boot device
+  -64	net/eth.c		no Ethernet found.
-   -1	common/cmd_nand.c	Unknown Chip ID on boot device
+   65	net/eth.c		Ethernet found.
-   -1	common/cmd_nand.c	Read Error on boot device
-   -1	common/cmd_nand.c	Image header has bad magic number
-
-   -1	common/env_common.c	Environment has a bad CRC, using default
 
+  -80	common/cmd_net.c	usage wrong
+   80	common/cmd_net.c	before calling NetLoop()
+  -81	common/cmd_net.c	some error in NetLoop() occured
+   81	common/cmd_net.c	NetLoop() back without error
+  -82	common/cmd_net.c	size == 0 (File with size 0 loaded)
+   82	common/cmd_net.c	trying automatic boot
+   83	common/cmd_net.c	running autoscript
+  -83	common/cmd_net.c	some error in automatic boot or autoscript
+   84	common/cmd_net.c	end without errors
 
 Modem Support:
 --------------

board/hermes/hermes.c

@@ -597,6 +597,7 @@ void show_boot_progress (int status)
 {
 	volatile immap_t *immr = (immap_t *) CFG_IMMR;
 
+	if (status < -32) status = -1;	/* let things compatible */
 	status ^= 0x0F;
 	status = (status & 0x0F) << 14;
 	immr->im_cpm.cp_pbdat = (immr->im_cpm.cp_pbdat & ~PB_LED_ALL) | status;

board/logodl/logodl.c

@@ -107,6 +107,7 @@ void logodl_set_led(int led, int state)
 
 void show_boot_progress (int status)
 {
+	if (status < -32) status = -1;  /* let things compatible */
 	/*
 	  switch(status) {
 	  case  1: logodl_set_led(0,1); break;

board/pcs440ep/config.mk

@@ -25,6 +25,9 @@
 # PCS440EP board
 #
 
+# Check the U-Boot Image with a SHA1 checksum
+ALL += $(obj)u-boot.sha1
+
 #TEXT_BASE = 0x00001000
 
 ifeq ($(ramsym),1)

board/pcs440ep/flash.c

@@ -83,6 +83,7 @@ void flash_print_info(flash_info_t *info)
 	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
 	case FLASH_MAN_SST:	printf ("SST ");		break;
 	case FLASH_MAN_EXCEL:	printf ("Excel Semiconductor "); break;
+	case FLASH_MAN_MX:	printf ("MXIC "); break;
 	default:		printf ("Unknown Vendor ");	break;
 	}
 
@@ -195,6 +196,9 @@ static ulong flash_get_size(vu_long *addr, flash_info_t *info)
 	case (CFG_FLASH_WORD_SIZE)EXCEL_MANUFACT:
 		info->flash_id = FLASH_MAN_EXCEL;
 		break;
+	case (CFG_FLASH_WORD_SIZE)MX_MANUFACT:
+		info->flash_id = FLASH_MAN_MX;
+		break;
 	default:
 		info->flash_id = FLASH_UNKNOWN;
 		info->sector_count = 0;

board/pcs440ep/init.S

@@ -98,7 +98,12 @@ tlbtab:
 	/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
 	tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
 
-    tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+	/*
+	 * TLB entries for SDRAM are not needed on this platform.
+	 * They are dynamically generated in the SPD DDR detection
+	 * routine.
+	 */
+
 	tlbentry( CFG_PCI_BASE, SZ_256M, CFG_PCI_BASE, 0, AC_R|AC_W|SA_G|SA_I )
 
 	/* PCI */

board/pcs440ep/pcs440ep.c

@@ -23,20 +23,112 @@
 
 #include <common.h>
 #include <ppc4xx.h>
+#include <malloc.h>
+#include <command.h>
+#include <crc.h>
 #include <asm/processor.h>
 #include <spd_sdram.h>
+#include <status_led.h>
+#include <sha1.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
 extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
-static void set_leds(int val)
+unsigned char	sha1_checksum[SHA1_SUM_LEN];
-{
+
-	unsigned char led[16] = {0x0, 0x8, 0x4, 0xc, 0x2, 0xa, 0x6, 0xe,
+/* swap 4 Bits (Bit0 = Bit3, Bit1 = Bit2, Bit2 = Bit1 and Bit3 = Bit0) */
+unsigned char swapbits[16] = {0x0, 0x8, 0x4, 0xc, 0x2, 0xa, 0x6, 0xe,
 			      0x1, 0x9, 0x5, 0xd, 0x3, 0xb, 0x7, 0xf};
-	out32(GPIO0_OR, (in32(GPIO0_OR) & ~0x78000000) | (led[val] << 27));
+
+static void set_leds (int val)
+{
+	out32(GPIO0_OR, (in32 (GPIO0_OR) & ~0x78000000) | (val << 27));
 }
 
+#define GET_LEDS ((in32 (GPIO0_OR) & 0x78000000) >> 27)
+
+void __led_init (led_id_t mask, int state)
+{
+	int	val = GET_LEDS;
+
+	if (state == STATUS_LED_ON)
+		val |= mask;
+	else
+		val &= ~mask;
+	set_leds (val);
+}
+
+void __led_set (led_id_t mask, int state)
+{
+	int	val = GET_LEDS;
+
+	if (state == STATUS_LED_ON)
+		val |= mask;
+	else if (state == STATUS_LED_OFF)
+		val &= ~mask;
+	set_leds (val);
+}
+
+void __led_toggle (led_id_t mask)
+{
+	int	val = GET_LEDS;
+
+	val ^= mask;
+	set_leds (val);
+}
+
+static void status_led_blink (void)
+{
+	int	i;
+	int	val = GET_LEDS;
+
+	/* set all LED which are on, to state BLINKING */
+	for (i = 0; i < 4; i++) {
+		if (val & 0x08) status_led_set (i, STATUS_LED_BLINKING);
+		val = val << 1;
+	}
+}
+
+#if defined(CONFIG_SHOW_BOOT_PROGRESS)
+void show_boot_progress (int val)
+{
+	/* find all valid Codes for val in README */
+	if (val == -30) return;
+	if (val < 0) {
+		/* smthing goes wrong */
+		status_led_blink ();
+		return;
+	}
+	switch (val) {
+		case 1:
+			/* validating Image */
+			status_led_set (0, STATUS_LED_OFF);
+			status_led_set (1, STATUS_LED_ON);
+			status_led_set (2, STATUS_LED_ON);
+			break;
+		case 15:
+			/* booting */
+			status_led_set (0, STATUS_LED_ON);
+			status_led_set (1, STATUS_LED_ON);
+			status_led_set (2, STATUS_LED_ON);
+			break;
+		case 64:
+			/* starting Ethernet configuration */
+			status_led_set (0, STATUS_LED_OFF);
+			status_led_set (1, STATUS_LED_OFF);
+			status_led_set (2, STATUS_LED_ON);
+			break;
+		case 80:
+			/* loading Image */
+			status_led_set (0, STATUS_LED_ON);
+			status_led_set (1, STATUS_LED_OFF);
+			status_led_set (2, STATUS_LED_ON);
+			break;
+	}
+}
+#endif
+
 int board_early_init_f(void)
 {
 	register uint reg;
@@ -85,6 +177,252 @@ int board_early_init_f(void)
 	return 0;
 }
 
+#define EEPROM_LEN	256
+void load_sernum_ethaddr (void)
+{
+	int	ret;
+	char	buf[EEPROM_LEN];
+	char	mac[32];
+	char	*use_eeprom;
+	u16	checksumcrc16 = 0;
+
+	/* read the MACs from EEprom */
+	status_led_set (0, STATUS_LED_ON);
+	status_led_set (1, STATUS_LED_ON);
+	ret = eeprom_read (CFG_I2C_EEPROM_ADDR, 0, (uchar *)buf, EEPROM_LEN);
+	if (ret == 0) {
+		checksumcrc16 = cyg_crc16 ((uchar *)buf, EEPROM_LEN - 2);
+		/* check, if the EEprom is programmed:
+		 * - The Prefix(Byte 0,1,2) is equal to "ATR"
+		 * - The checksum, stored in the last 2 Bytes, is correct
+		 */
+		if ((strncmp (buf,"ATR",3) != 0) ||
+			((checksumcrc16 >> 8) != buf[EEPROM_LEN - 2]) ||
+			((checksumcrc16 & 0xff) != buf[EEPROM_LEN - 1])) 
+		{
+			/* EEprom is not programmed */
+			printf("%s: EEPROM Checksum not OK\n", __FUNCTION__);
+		} else {
+			/* get the MACs */
+			sprintf (mac, "%02x:%02x:%02x:%02x:%02x:%02x", 
+				buf[3],
+				buf[4],
+				buf[5],
+				buf[6],
+				buf[7],
+				buf[8]);
+			setenv ("ethaddr", (char *) mac);
+			sprintf (mac, "%02x:%02x:%02x:%02x:%02x:%02x", 
+				buf[9],
+				buf[10],
+				buf[11],
+				buf[12],
+				buf[13],
+				buf[14]);
+			setenv ("eth1addr", (char *) mac);
+			return;
+		}
+	}
+
+	/* some error reading the EEprom */
+	if ((use_eeprom = getenv ("use_eeprom_ethaddr")) == NULL) {
+		/* dont use bootcmd */
+		setenv("bootdelay", "-1");
+		return;
+	}
+	/* == default ? use standard */
+	if (strncmp (use_eeprom, "default", 7) == 0) {
+		return;
+	}
+	/* Env doesnt exist -> hang */
+	status_led_blink ();
+	hang ();
+	return;
+}
+
+#ifdef CONFIG_PREBOOT
+
+static uchar kbd_magic_prefix[]		= "key_magic";
+static uchar kbd_command_prefix[]	= "key_cmd";
+
+struct kbd_data_t {
+	char s1;
+	char s2;
+};
+
+struct kbd_data_t* get_keys (struct kbd_data_t *kbd_data)
+{
+	char *val;
+	unsigned long tmp;
+
+	/* use the DIPs for some bootoptions */
+	val = getenv (ENV_NAME_DIP);
+	tmp = simple_strtoul (val, NULL, 16);
+
+	kbd_data->s2 = (tmp & 0x0f);
+	kbd_data->s1 = (tmp & 0xf0) >> 4;
+	return kbd_data;
+}
+
+static int compare_magic (const struct kbd_data_t *kbd_data, char *str)
+{
+	char s1 = str[0];
+
+	if (s1 >= '0' && s1 <= '9')
+		s1 -= '0';
+	else if (s1 >= 'a' && s1 <= 'f')
+		s1 = s1 - 'a' + 10;
+	else if (s1 >= 'A' && s1 <= 'F')
+		s1 = s1 - 'A' + 10;
+	else
+		return -1;
+
+	if (s1 != kbd_data->s1) return -1;
+
+	s1 = str[1];
+	if (s1 >= '0' && s1 <= '9')
+		s1 -= '0';
+	else if (s1 >= 'a' && s1 <= 'f')
+		s1 = s1 - 'a' + 10;
+	else if (s1 >= 'A' && s1 <= 'F')
+		s1 = s1 - 'A' + 10;
+	else
+		return -1;
+
+	if (s1 != kbd_data->s2) return -1;
+	return 0;
+}
+
+static char *key_match (const struct kbd_data_t *kbd_data)
+{
+	char magic[sizeof (kbd_magic_prefix) + 1];
+	char *suffix;
+	char *kbd_magic_keys;
+
+	/*
+	 * The following string defines the characters that can be appended
+	 * to "key_magic" to form the names of environment variables that
+	 * hold "magic" key codes, i. e. such key codes that can cause
+	 * pre-boot actions. If the string is empty (""), then only
+	 * "key_magic" is checked (old behaviour); the string "125" causes
+	 * checks for "key_magic1", "key_magic2" and "key_magic5", etc.
+	 */
+	if ((kbd_magic_keys = getenv ("magic_keys")) == NULL)
+		kbd_magic_keys = "";
+
+	/* loop over all magic keys;
+	 * use '\0' suffix in case of empty string
+	 */
+	for (suffix = kbd_magic_keys; *suffix ||
+		     suffix == kbd_magic_keys; ++suffix) {
+		sprintf (magic, "%s%c", kbd_magic_prefix, *suffix);
+		if (compare_magic (kbd_data, getenv (magic)) == 0) {
+			char cmd_name[sizeof (kbd_command_prefix) + 1];
+			char *cmd;
+
+			sprintf (cmd_name, "%s%c", kbd_command_prefix, *suffix);
+			cmd = getenv (cmd_name);
+
+			return (cmd);
+		}
+	}
+	return (NULL);
+}
+
+#endif /* CONFIG_PREBOOT */
+
+static int pcs440ep_readinputs (void)
+{
+	int	i;
+	char	value[20];
+
+	/* read the inputs and set the Envvars */
+	/* Revision Level Bit 26 - 29 */
+	i = ((in32 (GPIO0_IR) & 0x0000003c) >> 2);
+	i = swapbits[i];
+	sprintf (value, "%02x", i);
+	setenv (ENV_NAME_REVLEV, value);
+	/* Solder Switch Bit 30 - 33 */
+	i = (in32 (GPIO0_IR) & 0x00000003) << 2;
+	i += (in32 (GPIO1_IR) & 0xc0000000) >> 30;
+	i = swapbits[i];
+	sprintf (value, "%02x", i);
+	setenv (ENV_NAME_SOLDER, value);
+	/* DIP Switch Bit 49 - 56 */
+	i = ((in32 (GPIO1_IR) & 0x00007f80) >> 7);
+	i = (swapbits[i & 0x0f] << 4) + swapbits[(i & 0xf0) >> 4];
+	sprintf (value, "%02x", i);
+	setenv (ENV_NAME_DIP, value);
+	return 0;
+}
+
+
+#if defined(CONFIG_SHA1_CHECK_UB_IMG)
+/*************************************************************************
+ * calculate a SHA1 sum for the U-Boot image in Flash.
+ *
+ ************************************************************************/
+static int pcs440ep_sha1 (int docheck)
+{
+	unsigned char *data;
+	unsigned char *ptroff;
+	unsigned char output[20];
+	unsigned char org[20];
+	int	i, len = CONFIG_SHA1_LEN;
+
+	memcpy ((char *)CFG_LOAD_ADDR, (char *)CONFIG_SHA1_START, len);
+	data = (unsigned char *)CFG_LOAD_ADDR;
+	ptroff = &data[len + SHA1_SUM_POS];
+
+	for (i = 0; i < SHA1_SUM_LEN; i++) {
+		org[i] = ptroff[i];
+		ptroff[i] = 0;
+	}
+	
+	sha1_csum ((unsigned char *) data, len, (unsigned char *)output);
+
+	if (docheck == 2) {
+		for (i = 0; i < 20 ; i++) {
+			printf("%02X ", output[i]);
+		}
+		printf("\n");
+	}
+	if (docheck == 1) {
+		for (i = 0; i < 20 ; i++) {
+			if (org[i] != output[i]) return 1;
+		}
+	}
+	return 0;
+}
+
+/*************************************************************************
+ * do some checks after the SHA1 checksum from the U-Boot Image was
+ * calculated.
+ *
+ ************************************************************************/
+static void pcs440ep_checksha1 (void)
+{
+	int	ret;
+	char	*cs_test;
+
+	ret = pcs440ep_sha1 (1);
+	if (ret == 0) return;
+
+	if ((cs_test = getenv ("cs_test")) == NULL) {
+		/* Env doesnt exist -> hang */
+		status_led_blink ();
+		hang ();
+	}
+
+	if (strncmp (cs_test, "off", 3) == 0) {
+		printf ("SHA1 U-Boot sum NOT ok!\n");
+		setenv ("bootdelay", "-1");
+	}
+}
+#else
+static __inline__ void pcs440ep_checksha1 (void) { do {} while (0);}
+#endif
+
 int misc_init_r (void)
 {
 	uint pbcr;
@@ -139,6 +477,18 @@ int misc_init_r (void)
 			    CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1,
 			    &flash_info[1]);
 
+	pcs440ep_readinputs ();
+	pcs440ep_checksha1 ();
+#ifdef CONFIG_PREBOOT
+	{
+		struct kbd_data_t kbd_data;
+		/* Decode keys */
+		char *str = strdup (key_match (get_keys (&kbd_data)));
+		/* Set or delete definition */
+		setenv ("preboot", str);
+		free (str);
+	}
+#endif /* CONFIG_PREBOOT */
 	return 0;
 }
 
@@ -156,13 +506,34 @@ int checkboard(void)
 	return (0);
 }
 
+
+#if defined(CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG)
+void spd_ddr_init_hang (void)
+{
+	status_led_set (0, STATUS_LED_OFF);
+	status_led_set (1, STATUS_LED_ON);
+	/* we cannot use hang() because we are still running from
+	   Flash, and so the status_led driver is not initialized */
+	puts ("### ERROR ### Please RESET the board ###\n");
+	for (;;) {
+		__led_toggle (4);
+		udelay (100000);
+	}
+}
+#endif
+
 long int initdram (int board_type)
 {
 	long dram_size = 0;
 
-	set_leds(1);			/* display boot info counter */
+	status_led_set (0, STATUS_LED_ON);
+	status_led_set (1, STATUS_LED_OFF);
 	dram_size = spd_sdram();
-	set_leds(2);			/* display boot info counter */
+	status_led_set (0, STATUS_LED_OFF);
+	status_led_set (1, STATUS_LED_ON);
+	if (dram_size == 0) {
+		hang();
+	}
 
 	return dram_size;
 }
@@ -377,3 +748,120 @@ void hw_watchdog_reset(void)
 
 }
 #endif
+
+/*************************************************************************
+ * "led" Commando for the U-Boot shell
+ *
+ ************************************************************************/
+int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	int	rcode = 0;
+	ulong	pattern = 0;
+
+	pattern = simple_strtoul (argv[1], NULL, 10);
+	if (pattern > 200) {
+		status_led_blink ();
+		hang ();
+		return rcode;
+	}
+	if (pattern > 100) {
+		status_led_blink ();
+		return rcode;
+	}
+	pattern &= 0x0f;
+	set_leds (pattern);
+	return rcode;
+}
+
+U_BOOT_CMD(
+ 	led,	2,	1,	do_led,
+ 	"led    - set the led\n",
+	NULL
+);
+
+#if defined(CONFIG_SHA1_CHECK_UB_IMG)
+/*************************************************************************
+ * "sha1" Commando for the U-Boot shell
+ *
+ ************************************************************************/
+int do_sha1 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	int	rcode = -1;
+
+	if (argc < 2) {
+  usage:
+		printf ("Usage:\n%s\n", cmdtp->usage);
+		return 1;
+	}
+
+	if (argc >= 3) {
+		unsigned char *data;
+		unsigned char output[20];
+		int	len;
+		int	i;
+		
+		data = (unsigned char *)simple_strtoul (argv[1], NULL, 16);
+		len = simple_strtoul (argv[2], NULL, 16);
+		sha1_csum (data, len, (unsigned char *)output);
+		printf ("U-Boot sum:\n");
+		for (i = 0; i < 20 ; i++) {
+			printf ("%02X ", output[i]);
+		}
+		printf ("\n");
+		if (argc == 4) {
+			data = (unsigned char *)simple_strtoul (argv[3], NULL, 16);
+			memcpy (data, output, 20);
+		}
+		return 0;
+	}
+	if (argc == 2) {
+		char *ptr = argv[1];
+		if (*ptr != '-') goto usage;
+		ptr++;
+		if ((*ptr == 'c') || (*ptr == 'C')) {
+			rcode = pcs440ep_sha1 (1);
+			printf ("SHA1 U-Boot sum %sok!\n", (rcode != 0) ? "not " : "");
+		} else if ((*ptr == 'p') || (*ptr == 'P')) {
+			rcode = pcs440ep_sha1 (2);
+		} else {
+			rcode = pcs440ep_sha1 (0);
+		}
+		return rcode;	
+	}
+	return rcode;
+}
+
+U_BOOT_CMD(
+ 	sha1,	4,	1,	do_sha1,
+ 	"sha1    - calculate the SHA1 Sum\n",
+	"address len [addr]  calculate the SHA1 sum [save at addr]\n"
+	"     -p calculate the SHA1 sum from the U-Boot image in flash and print\n"
+	"     -c check the U-Boot image in flash\n"
+);
+#endif
+
+#ifdef CONFIG_IDE_PREINIT
+int ide_preinit (void)
+{
+	/* Set True IDE Mode */
+	out32 (GPIO0_OR, (in32 (GPIO0_OR) | 0x00100000));
+	out32 (GPIO0_OR, (in32 (GPIO0_OR) | 0x00200000));
+	out32 (GPIO1_OR, (in32 (GPIO1_OR) & ~0x00008040));
+	udelay (100000);
+	return 0;
+}
+#endif
+
+#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+void ide_set_reset (int idereset)
+{
+	debug ("ide_reset(%d)\n", idereset);
+	if (idereset == 0) {
+		out32 (GPIO0_OR, (in32 (GPIO0_OR) | 0x00200000));
+	} else {
+		out32 (GPIO0_OR, (in32 (GPIO0_OR) & ~0x00200000));
+	}
+	udelay (10000);
+}
+#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+

board/pcs440ep/u-boot.lds

@@ -65,6 +65,7 @@ SECTIONS
   {
     cpu/ppc4xx/start.o	(.text)
     board/pcs440ep/init.o	(.text)
+    lib_generic/sha1.o		(.text)
 
     *(.text)
     *(.fixup)

board/sc520_cdp/sc520_cdp.c

@@ -507,6 +507,7 @@ int dram_init(void)
 
 void show_boot_progress(int val)
 {
+	if (val < -32) val = -1;  /* let things compatible */
 	outb(val&0xff, 0x80);
 	outb((val&0xff00)>>8, 0x680);
 }

board/sc520_spunk/sc520_spunk.c

@@ -507,6 +507,7 @@ void show_boot_progress(int val)
 {
 	int version = read_mmcr_byte(SC520_SYSINFO);
 
+	if (val < -32) val = -1;  /* let things compatible */
 	if (version == 0) {
 		/* PIO31-PIO16 Data */
 		write_mmcr_word(SC520_PIODATA31_16,

common/cmd_doc.c

@@ -216,6 +216,7 @@ int do_docboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	image_header_t *hdr;
 	int rcode = 0;
 
+	SHOW_BOOT_PROGRESS (34);
 	switch (argc) {
 	case 1:
 		addr = CFG_LOAD_ADDR;
@@ -236,24 +237,27 @@ int do_docboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		break;
 	default:
 		printf ("Usage:\n%s\n", cmdtp->usage);
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-35);
 		return 1;
 	}
 
+	SHOW_BOOT_PROGRESS (35);
 	if (!boot_device) {
 		puts ("\n** No boot device **\n");
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-36);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS (36);
 
 	dev = simple_strtoul(boot_device, &ep, 16);
 
 	if ((dev >= CFG_MAX_DOC_DEVICE) ||
 	    (doc_dev_desc[dev].ChipID == DOC_ChipID_UNKNOWN)) {
 		printf ("\n** Device %d not available\n", dev);
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-37);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS (37);
 
 	printf ("\nLoading from device %d: %s at 0x%lX (offset 0x%lX)\n",
 		dev, doc_dev_desc[dev].name, doc_dev_desc[dev].physadr,
@@ -262,9 +266,10 @@ int do_docboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	if (doc_rw (doc_dev_desc + dev, 1, offset,
 		    SECTORSIZE, NULL, (u_char *)addr)) {
 		printf ("** Read error on %d\n", dev);
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-38);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS (38);
 
 	hdr = (image_header_t *)addr;
 
@@ -276,16 +281,18 @@ int do_docboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		cnt -= SECTORSIZE;
 	} else {
 		puts ("\n** Bad Magic Number **\n");
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-39);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS (39);
 
 	if (doc_rw (doc_dev_desc + dev, 1, offset + SECTORSIZE, cnt,
 		    NULL, (u_char *)(addr+SECTORSIZE))) {
 		printf ("** Read error on %d\n", dev);
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-40);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS (40);
 
 	/* Loading ok, update default load address */
 

common/cmd_ide.c

@@ -185,6 +185,9 @@ static void input_data(int dev, ulong *sect_buf, int words);
 static void output_data(int dev, ulong *sect_buf, int words);
 static void ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len);
 
+#ifndef CFG_ATA_PORT_ADDR
+#define CFG_ATA_PORT_ADDR(port) (port)
+#endif
 
 #ifdef CONFIG_ATAPI
 static void	atapi_inquiry(block_dev_desc_t *dev_desc);
@@ -382,6 +385,7 @@ int do_diskboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	image_header_t *hdr;
 	int rcode = 0;
 
+	SHOW_BOOT_PROGRESS (41);
 	switch (argc) {
 	case 1:
 		addr = CFG_LOAD_ADDR;
@@ -397,44 +401,50 @@ int do_diskboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		break;
 	default:
 		printf ("Usage:\n%s\n", cmdtp->usage);
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-42);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS (42);
 
 	if (!boot_device) {
 		puts ("\n** No boot device **\n");
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-43);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS (43);
 
 	dev = simple_strtoul(boot_device, &ep, 16);
 
 	if (ide_dev_desc[dev].type==DEV_TYPE_UNKNOWN) {
 		printf ("\n** Device %d not available\n", dev);
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-44);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS (44);
 
 	if (*ep) {
 		if (*ep != ':') {
 			puts ("\n** Invalid boot device, use `dev[:part]' **\n");
-			SHOW_BOOT_PROGRESS (-1);
+			SHOW_BOOT_PROGRESS (-45);
 			return 1;
 		}
 		part = simple_strtoul(++ep, NULL, 16);
 	}
+	SHOW_BOOT_PROGRESS (45);
 	if (get_partition_info (&ide_dev_desc[dev], part, &info)) {
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-46);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS (46);
 	if ((strncmp((char *)info.type, BOOT_PART_TYPE, sizeof(info.type)) != 0) &&
 	    (strncmp((char *)info.type, BOOT_PART_COMP, sizeof(info.type)) != 0)) {
 		printf ("\n** Invalid partition type \"%.32s\""
 			" (expect \"" BOOT_PART_TYPE "\")\n",
 			info.type);
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-47);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS (47);
 
 	printf ("\nLoading from IDE device %d, partition %d: "
 		"Name: %.32s  Type: %.32s\n",
@@ -445,26 +455,29 @@ int do_diskboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	if (ide_dev_desc[dev].block_read (dev, info.start, 1, (ulong *)addr) != 1) {
 		printf ("** Read error on %d:%d\n", dev, part);
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-48);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS (48);
 
 	hdr = (image_header_t *)addr;
 
 	if (ntohl(hdr->ih_magic) != IH_MAGIC) {
 		printf("\n** Bad Magic Number **\n");
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-49);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS (49);
 
 	checksum = ntohl(hdr->ih_hcrc);
 	hdr->ih_hcrc = 0;
 
 	if (crc32 (0, (uchar *)hdr, sizeof(image_header_t)) != checksum) {
 		puts ("\n** Bad Header Checksum **\n");
-		SHOW_BOOT_PROGRESS (-2);
+		SHOW_BOOT_PROGRESS (-50);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS (50);
 	hdr->ih_hcrc = htonl(checksum); /* restore checksum for later use */
 
 	print_image_hdr (hdr);
@@ -477,9 +490,10 @@ int do_diskboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	if (ide_dev_desc[dev].block_read (dev, info.start+1, cnt,
 		      (ulong *)(addr+info.blksz)) != cnt) {
 		printf ("** Read error on %d:%d\n", dev, part);
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-51);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS (51);
 
 
 	/* Loading ok, update default load address */
@@ -807,13 +821,13 @@ ide_outb(int dev, int port, unsigned char val)
 
 	/* Ensure I/O operations complete */
 	EIEIO;
-	*((uchar *)(ATA_CURR_BASE(dev)+port)) = val;
+	*((u16 *)(ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port))) = val;
 }
 #else	/* ! __PPC__ */
 static void __inline__
 ide_outb(int dev, int port, unsigned char val)
 {
-	outb(val, ATA_CURR_BASE(dev)+port);
+	outb(val, ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port));
 }
 #endif	/* __PPC__ */
 
@@ -825,7 +839,7 @@ ide_inb(int dev, int port)
 	uchar val;
 	/* Ensure I/O operations complete */
 	EIEIO;
-	val = *((uchar *)(ATA_CURR_BASE(dev)+port));
+	val = *((u16 *)(ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)));
 	debug ("ide_inb (dev= %d, port= 0x%x) : @ 0x%08lx -> 0x%02x\n",
 		dev, port, (ATA_CURR_BASE(dev)+port), val);
 	return (val);
@@ -834,7 +848,7 @@ ide_inb(int dev, int port)
 static unsigned char __inline__
 ide_inb(int dev, int port)
 {
-  return inb(ATA_CURR_BASE(dev)+port);
+  return inb(ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port));
 }
 #endif	/* __PPC__ */
 
@@ -891,6 +905,9 @@ input_swap_data(int dev, ulong *sect_buf, int words)
 #ifdef __MIPS__
 		*dbuf++ = swab16p((u16*)pbuf);
 		*dbuf++ = swab16p((u16*)pbuf);
+#elif defined(CONFIG_PCS440EP)
+		*dbuf++ = *pbuf;
+		*dbuf++ = *pbuf;
 #else
 		*dbuf++ = ld_le16(pbuf);
 		*dbuf++ = ld_le16(pbuf);
@@ -930,10 +947,18 @@ output_data(int dev, ulong *sect_buf, int words)
 	pbuf = (ushort *)(ATA_CURR_BASE(dev)+ATA_DATA_REG);
 	dbuf = (ushort *)sect_buf;
 	while (words--) {
+#if defined(CONFIG_PCS440EP)
+		/* not tested, because CF was write protected */
+		EIEIO;
+		*pbuf = ld_le16(dbuf++);
+		EIEIO;
+		*pbuf = ld_le16(dbuf++);
+#else
 		EIEIO;
 		*pbuf = *dbuf++;
 		EIEIO;
 		*pbuf = *dbuf++;
+#endif
 	}
 #endif
 }
@@ -981,10 +1006,17 @@ input_data(int dev, ulong *sect_buf, int words)
 	debug("in input data base for read is %lx\n", (unsigned long) pbuf);
 
 	while (words--) {
+#if defined(CONFIG_PCS440EP)
+		EIEIO;
+		*dbuf++ = ld_le16(pbuf);
+		EIEIO;
+		*dbuf++ = ld_le16(pbuf);
+#else
 		EIEIO;
 		*dbuf++ = *pbuf;
 		EIEIO;
 		*dbuf++ = *pbuf;
+#endif
 	}
 #endif
 }

common/cmd_nand.c

@@ -486,17 +486,19 @@ static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand,
 	r = nand_read(nand, offset, &cnt, (u_char *) addr);
 	if (r) {
 		puts("** Read error\n");
-		SHOW_BOOT_PROGRESS(-1);
+		SHOW_BOOT_PROGRESS(-56);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS(56);
 
 	hdr = (image_header_t *) addr;
 
 	if (ntohl(hdr->ih_magic) != IH_MAGIC) {
 		printf("\n** Bad Magic Number 0x%x **\n", hdr->ih_magic);
-		SHOW_BOOT_PROGRESS(-1);
+		SHOW_BOOT_PROGRESS(-57);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS(57);
 
 	print_image_hdr(hdr);
 
@@ -505,9 +507,10 @@ static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand,
 	r = nand_read(nand, offset, &cnt, (u_char *) addr);
 	if (r) {
 		puts("** Read error\n");
-		SHOW_BOOT_PROGRESS(-1);
+		SHOW_BOOT_PROGRESS(-58);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS(58);
 
 	/* Loading ok, update default load address */
 
@@ -559,6 +562,7 @@ int do_nandboot(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 	}
 #endif
 
+	SHOW_BOOT_PROGRESS(52);
 	switch (argc) {
 	case 1:
 		addr = CFG_LOAD_ADDR;
@@ -582,23 +586,26 @@ int do_nandboot(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 usage:
 #endif
 		printf("Usage:\n%s\n", cmdtp->usage);
-		SHOW_BOOT_PROGRESS(-1);
+		SHOW_BOOT_PROGRESS(-53);
 		return 1;
 	}
 
+	SHOW_BOOT_PROGRESS(53);
 	if (!boot_device) {
 		puts("\n** No boot device **\n");
-		SHOW_BOOT_PROGRESS(-1);
+		SHOW_BOOT_PROGRESS(-54);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS(54);
 
 	idx = simple_strtoul(boot_device, NULL, 16);
 
 	if (idx < 0 || idx >= CFG_MAX_NAND_DEVICE || !nand_info[idx].name) {
 		printf("\n** Device %d not available\n", idx);
-		SHOW_BOOT_PROGRESS(-1);
+		SHOW_BOOT_PROGRESS(-55);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS(55);
 
 	return nand_load_image(cmdtp, &nand_info[idx], offset, addr, argv[0]);
 }
@@ -887,6 +894,7 @@ int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	ulong offset = 0;
 	image_header_t *hdr;
 	int rcode = 0;
+	SHOW_BOOT_PROGRESS(52);
 	switch (argc) {
 	case 1:
 		addr = CFG_LOAD_ADDR;
@@ -907,24 +915,27 @@ int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		break;
 	default:
 		printf ("Usage:\n%s\n", cmdtp->usage);
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-53);
 		return 1;
 	}
 
+	SHOW_BOOT_PROGRESS(53);
 	if (!boot_device) {
 		puts ("\n** No boot device **\n");
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-54);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS(54);
 
 	dev = simple_strtoul(boot_device, &ep, 16);
 
 	if ((dev >= CFG_MAX_NAND_DEVICE) ||
 	    (nand_dev_desc[dev].ChipID == NAND_ChipID_UNKNOWN)) {
 		printf ("\n** Device %d not available\n", dev);
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-55);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS(55);
 
 	printf ("\nLoading from device %d: %s at 0x%lx (offset 0x%lx)\n",
 		dev, nand_dev_desc[dev].name, nand_dev_desc[dev].IO_ADDR,
@@ -933,9 +944,10 @@ int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	if (nand_legacy_rw (nand_dev_desc + dev, NANDRW_READ, offset,
 			SECTORSIZE, NULL, (u_char *)addr)) {
 		printf ("** Read error on %d\n", dev);
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-56);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS(56);
 
 	hdr = (image_header_t *)addr;
 
@@ -947,17 +959,19 @@ int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		cnt -= SECTORSIZE;
 	} else {
 		printf ("\n** Bad Magic Number 0x%x **\n", ntohl(hdr->ih_magic));
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-57);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS(57);
 
 	if (nand_legacy_rw (nand_dev_desc + dev, NANDRW_READ,
 			offset + SECTORSIZE, cnt, NULL,
 			(u_char *)(addr+SECTORSIZE))) {
 		printf ("** Read error on %d\n", dev);
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-58);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS(58);
 
 	/* Loading ok, update default load address */
 

common/cmd_net.c

@@ -30,6 +30,13 @@
 
 #if (CONFIG_COMMANDS & CFG_CMD_NET)
 
+#ifdef CONFIG_SHOW_BOOT_PROGRESS
+# include <status_led.h>
+extern void show_boot_progress (int val);
+# define SHOW_BOOT_PROGRESS(arg)	show_boot_progress (arg)
+#else
+# define SHOW_BOOT_PROGRESS(arg)
+#endif
 
 extern int do_bootm (cmd_tbl_t *, int, int, char *[]);
 
@@ -184,18 +191,25 @@ netboot_common (proto_t proto, cmd_tbl_t *cmdtp, int argc, char *argv[])
 		break;
 
 	default: printf ("Usage:\n%s\n", cmdtp->usage);
+		SHOW_BOOT_PROGRESS(-80);
 		return 1;
 	}
 
-	if ((size = NetLoop(proto)) < 0)
+	SHOW_BOOT_PROGRESS(80);
+	if ((size = NetLoop(proto)) < 0) {
+		SHOW_BOOT_PROGRESS(-81);
 		return 1;
+	}
 
+	SHOW_BOOT_PROGRESS(81);
 	/* NetLoop ok, update environment */
 	netboot_update_env();
 
 	/* done if no file was loaded (no errors though) */
-	if (size == 0)
+	if (size == 0) {
+		SHOW_BOOT_PROGRESS(-82);
 		return 0;
+	}
 
 	/* flush cache */
 	flush_cache(load_addr, size);
@@ -208,14 +222,22 @@ netboot_common (proto_t proto, cmd_tbl_t *cmdtp, int argc, char *argv[])
 
 		printf ("Automatic boot of image at addr 0x%08lX ...\n",
 			load_addr);
+		SHOW_BOOT_PROGRESS(82);
 		rcode = do_bootm (cmdtp, 0, 1, local_args);
 	}
 
 #ifdef CONFIG_AUTOSCRIPT
 	if (((s = getenv("autoscript")) != NULL) && (strcmp(s,"yes") == 0)) {
 		printf("Running autoscript at addr 0x%08lX ...\n", load_addr);
+		SHOW_BOOT_PROGRESS(83);
 		rcode = autoscript (load_addr);
 	}
+#endif
+#if defined(CONFIG_SHOW_BOOT_PROGRESS)
+	if (rcode < 0)
+		SHOW_BOOT_PROGRESS(-83);
+	else
+		SHOW_BOOT_PROGRESS(84);
 #endif
 	return rcode;
 }

common/cmd_reiser.c

@@ -90,7 +90,7 @@ int do_reiserls (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	}
 
 	if (!reiserfs_mount(part_length)) {
-		printf ("** Bad Reisefs partition or disk - %s %d:%d **\n",  argv[1], dev, part);
+		printf ("** Bad Reiserfs partition or disk - %s %d:%d **\n",  argv[1], dev, part);
 		return 1;
 	}
 
@@ -183,7 +183,7 @@ int do_reiserload (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 			return 1;
 		}
 
-		if (strncmp(info.type, BOOT_PART_TYPE, sizeof(info.type)) != 0) {
+		if (strncmp((char *)info.type, BOOT_PART_TYPE, sizeof(info.type)) != 0) {
 			printf ("\n** Invalid partition type \"%.32s\""
 				" (expect \"" BOOT_PART_TYPE "\")\n",
 				info.type);
@@ -204,7 +204,7 @@ int do_reiserload (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	}
 
 	if (!reiserfs_mount(part_length)) {
-		printf ("** Bad Reisefs partition or disk - %s %d:%d **\n",  argv[1], dev, part);
+		printf ("** Bad Reiserfs partition or disk - %s %d:%d **\n",  argv[1], dev, part);
 		return 1;
 	}
 

common/env_common.c

@@ -232,7 +232,7 @@ void env_relocate (void)
 		puts ("Using default environment\n\n");
 #else
 		puts ("*** Warning - bad CRC, using default environment\n\n");
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-60);
 #endif
 
 		if (sizeof(default_environment) > ENV_SIZE)

cpu/ppc4xx/44x_spd_ddr.c

@@ -70,6 +70,13 @@
 
 #define ONE_BILLION	1000000000
 
+#if defined(CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG)
+extern void spd_ddr_init_hang (void);
+#define HANG()	spd_ddr_init_hang()
+#else
+#define HANG()	hang()
+#endif
+
 /*-----------------------------------------------------------------------------
   |  Memory Controller Options 0
   +-----------------------------------------------------------------------------*/
@@ -467,7 +474,7 @@ static void get_spd_info(unsigned long *dimm_populated,
 
 	if (dimm_found == FALSE) {
 		printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n");
-		hang();
+		HANG();
 	}
 }
 
@@ -490,7 +497,7 @@ static void check_mem_type(unsigned long *dimm_populated,
 				       dimm_num);
 				printf("Only DDR SDRAM DIMMs are supported.\n");
 				printf("Replace the DIMM module with a supported DIMM.\n\n");
-				hang();
+				HANG();
 				break;
 			}
 		}
@@ -510,7 +517,7 @@ static void check_volt_type(unsigned long *dimm_populated,
 			if (voltage_type != 0x04) {
 				printf("ERROR: DIMM %lu with unsupported voltage level.\n",
 				       dimm_num);
-				hang();
+				HANG();
 			} else {
 				debug("DIMM %lu voltage level supported.\n", dimm_num);
 			}
@@ -581,7 +588,7 @@ static void program_cfg0(unsigned long *dimm_populated,
 				printf("WARNING: DIMM with datawidth of %lu bits.\n",
 				       data_width);
 				printf("Only DIMMs with 32 or 64 bit datawidths supported.\n");
-				hang();
+				HANG();
 			}
 			break;
 		}
@@ -769,7 +776,7 @@ static void program_tr0(unsigned long *dimm_populated,
 				if ((tcyc_reg & 0x0F) >= 10) {
 					printf("ERROR: Tcyc incorrect for DIMM in slot %lu\n",
 					       dimm_num);
-					hang();
+					HANG();
 				}
 
 				cycle_time_ns_x_10[cas_index] =
@@ -849,7 +856,7 @@ static void program_tr0(unsigned long *dimm_populated,
 		printf("ERROR: No supported CAS latency with the installed DIMMs.\n");
 		printf("Only CAS latencies of 2.0, 2.5, and 3.0 are supported.\n");
 		printf("Make sure the PLB speed is within the supported range.\n");
-		hang();
+		HANG();
 	}
 
 	/*
@@ -1008,6 +1015,7 @@ static int short_mem_test(void)
 			 */
 			for (i = 0; i < NUMMEMTESTS; i++) {
 				for (j = 0; j < NUMMEMWORDS; j++) {
+//printf("bank enabled base:%x\n", &membase[j]);
 					membase[j] = test[i][j];
 					ppcDcbf((unsigned long)&(membase[j]));
 				}
@@ -1160,7 +1168,7 @@ static void program_tr1(void)
 	 */
 	if (window_found == FALSE) {
 		printf("ERROR: Cannot determine a common read delay.\n");
-		hang();
+		HANG();
 	}
 
 	/*
@@ -1310,7 +1318,7 @@ static unsigned long program_bxcr(unsigned long *dimm_populated,
 				printf("ERROR: Unsupported value for the banksize: %d.\n",
 				       bank_size_id);
 				printf("Replace the DIMM module with a supported DIMM.\n\n");
-				hang();
+				HANG();
 			}
 
 			switch (num_col_addr) {
@@ -1332,7 +1340,7 @@ static unsigned long program_bxcr(unsigned long *dimm_populated,
 				printf("ERROR: Unsupported value for number of "
 				       "column addresses: %d.\n", num_col_addr);
 				printf("Replace the DIMM module with a supported DIMM.\n\n");
-				hang();
+				HANG();
 			}
 
 			/*

cpu/ppc4xx/44x_spd_ddr2.c

@@ -129,6 +129,13 @@
 #define MY_TLB_WORD2_I_ENABLE	TLB_WORD2_I_ENABLE	/* disable caching on SDRAM */
 #endif
 
+#if defined(CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG)
+extern void spd_ddr_init_hang (void);
+#define HANG()	spd_ddr_init_hang()
+#else
+#define HANG()	hang()
+#endif
+
 /* Private Structure Definitions */
 
 /* enum only to ease code for cas latency setting */
@@ -582,7 +589,7 @@ static void get_spd_info(unsigned long *dimm_populated,
 
 	if (dimm_found == FALSE) {
 		printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n");
-		hang();
+		HANG();
 	}
 }
 
@@ -629,42 +636,42 @@ static void check_mem_type(unsigned long *dimm_populated,
 				       "slot %d.\n", (unsigned int)dimm_num);
 				printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
 				printf("Replace the DIMM module with a supported DIMM.\n\n");
-				hang();
+				HANG();
 				break;
 			case 2:
 				printf("ERROR: EDO DIMM detected in slot %d.\n",
 				       (unsigned int)dimm_num);
 				printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
 				printf("Replace the DIMM module with a supported DIMM.\n\n");
-				hang();
+				HANG();
 				break;
 			case 3:
 				printf("ERROR: Pipelined Nibble DIMM detected in slot %d.\n",
 				       (unsigned int)dimm_num);
 				printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
 				printf("Replace the DIMM module with a supported DIMM.\n\n");
-				hang();
+				HANG();
 				break;
 			case 4:
 				printf("ERROR: SDRAM DIMM detected in slot %d.\n",
 				       (unsigned int)dimm_num);
 				printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
 				printf("Replace the DIMM module with a supported DIMM.\n\n");
-				hang();
+				HANG();
 				break;
 			case 5:
 				printf("ERROR: Multiplexed ROM DIMM detected in slot %d.\n",
 				       (unsigned int)dimm_num);
 				printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
 				printf("Replace the DIMM module with a supported DIMM.\n\n");
-				hang();
+				HANG();
 				break;
 			case 6:
 				printf("ERROR: SGRAM DIMM detected in slot %d.\n",
 				       (unsigned int)dimm_num);
 				printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
 				printf("Replace the DIMM module with a supported DIMM.\n\n");
-				hang();
+				HANG();
 				break;
 			case 7:
 				debug("DIMM slot %d: DDR1 SDRAM detected\n", dimm_num);
@@ -679,7 +686,7 @@ static void check_mem_type(unsigned long *dimm_populated,
 				       (unsigned int)dimm_num);
 				printf("Only DDR1 and DDR2 SDRAM DIMMs are supported.\n");
 				printf("Replace the DIMM module with a supported DIMM.\n\n");
-				hang();
+				HANG();
 				break;
 			}
 		}
@@ -689,7 +696,7 @@ static void check_mem_type(unsigned long *dimm_populated,
 		    && (dimm_populated[dimm_num]   != SDRAM_NONE)
 		    && (dimm_populated[dimm_num-1] != dimm_populated[dimm_num])) {
 			printf("ERROR: DIMM's DDR1 and DDR2 type can not be mixed.\n");
-			hang();
+			HANG();
 		}
 	}
 }
@@ -764,7 +771,7 @@ static void check_frequency(unsigned long *dimm_populated,
 				       (unsigned int)(calc_cycle_time*10));
 				printf("Replace the DIMM, or change DDR frequency via "
 				       "strapping bits.\n\n");
-				hang();
+				HANG();
 			}
 		}
 	}
@@ -796,7 +803,7 @@ static void check_rank_number(unsigned long *dimm_populated,
 				       "slot %d is not supported.\n", dimm_rank, dimm_num);
 				printf("Only %d ranks are supported for all DIMM.\n", MAXRANKS);
 				printf("Replace the DIMM module with a supported DIMM.\n\n");
-				hang();
+				HANG();
 			} else
 				total_rank += dimm_rank;
 		}
@@ -805,7 +812,7 @@ static void check_rank_number(unsigned long *dimm_populated,
 			       "for all slots.\n", (unsigned int)total_rank);
 			printf("Only %d ranks are supported for all DIMM.\n", MAXRANKS);
 			printf("Remove one of the DIMM modules.\n\n");
-			hang();
+			HANG();
 		}
 	}
 }
@@ -830,28 +837,28 @@ static void check_voltage_type(unsigned long *dimm_populated,
 				printf("This DIMM is 5.0 Volt/TTL.\n");
 				printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
 				       (unsigned int)dimm_num);
-				hang();
+				HANG();
 				break;
 			case 0x01:
 				printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
 				printf("This DIMM is LVTTL.\n");
 				printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
 				       (unsigned int)dimm_num);
-				hang();
+				HANG();
 				break;
 			case 0x02:
 				printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
 				printf("This DIMM is 1.5 Volt.\n");
 				printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
 				       (unsigned int)dimm_num);
-				hang();
+				HANG();
 				break;
 			case 0x03:
 				printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
 				printf("This DIMM is 3.3 Volt/TTL.\n");
 				printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
 				       (unsigned int)dimm_num);
-				hang();
+				HANG();
 				break;
 			case 0x04:
 				/* 2.5 Voltage only for DDR1 */
@@ -863,7 +870,7 @@ static void check_voltage_type(unsigned long *dimm_populated,
 				printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
 				printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
 				       (unsigned int)dimm_num);
-				hang();
+				HANG();
 				break;
 			}
 		}
@@ -1006,13 +1013,13 @@ static void program_copt1(unsigned long *dimm_populated,
 	if ((dimm_populated[0] != SDRAM_NONE) && (dimm_populated[1] != SDRAM_NONE)) {
 		if (buf0 != buf1) {
 			printf("ERROR: DIMM's buffered/unbuffered, registered, clocking don't match.\n");
-			hang();
+			HANG();
 		}
 	}
 
 	if ((dimm_64bit == TRUE) && (dimm_32bit == TRUE)) {
 		printf("ERROR: Cannot mix 32 bit and 64 bit DDR-SDRAM DIMMs together.\n");
-		hang();
+		HANG();
 	}
 	else if ((dimm_64bit == TRUE) && (dimm_32bit == FALSE)) {
 		mcopt1 |= SDRAM_MCOPT1_DMWD_64;
@@ -1020,7 +1027,7 @@ static void program_copt1(unsigned long *dimm_populated,
 		mcopt1 |= SDRAM_MCOPT1_DMWD_32;
 	} else {
 		printf("ERROR: Please install only 32 or 64 bit DDR-SDRAM DIMMs.\n\n");
-		hang();
+		HANG();
 	}
 
 	if (ecc_enabled == TRUE)
@@ -1209,7 +1216,7 @@ static void program_initplr(unsigned long *dimm_populated,
 			break;
 		default:
 			printf("ERROR: ucode error on selected_cas value %d", selected_cas);
-			hang();
+			HANG();
 			break;
 		}
 
@@ -1241,7 +1248,7 @@ static void program_initplr(unsigned long *dimm_populated,
 			break;
 		default:
 			printf("ERROR: write recovery not support (%d)", write_recovery);
-			hang();
+			HANG();
 			break;
 		}
 #else
@@ -1259,7 +1266,7 @@ static void program_initplr(unsigned long *dimm_populated,
 			ods = ODS_REDUCED;
 		} else {
 			printf("ERROR: Unsupported number of DIMM's (%d)", total_dimm);
-			hang();
+			HANG();
 		}
 
 		mr = CMD_EMR | SELECT_MR | BURST_LEN_4 | wr | cas;
@@ -1284,7 +1291,7 @@ static void program_initplr(unsigned long *dimm_populated,
 		mtsdram(SDRAM_INITPLR13, 0x80800000 | emr);		/* EMR OCD Exit */
 	} else {
 		printf("ERROR: ucode error as unknown DDR type in program_initplr");
-		hang();
+		HANG();
 	}
 }
 
@@ -1389,7 +1396,7 @@ static void program_mode(unsigned long *dimm_populated,
 					} else {
 						printf("ERROR: SPD reported Tcyc is incorrect for DIMM "
 						       "in slot %d\n", (unsigned int)dimm_num);
-						hang();
+						HANG();
 					}
 				} else {
 					/* Convert from hex to decimal */
@@ -1526,7 +1533,7 @@ static void program_mode(unsigned long *dimm_populated,
 			printf("ERROR: Cannot find a supported CAS latency with the installed DIMMs.\n");
 			printf("Only DIMMs DDR1 with CAS latencies of 2.0, 2.5, and 3.0 are supported.\n");
 			printf("Make sure the PLB speed is within the supported range of the DIMMs.\n\n");
-			hang();
+			HANG();
 		}
 	} else { /* DDR2 */
 		debug("cas_3_0_available=%d\n", cas_3_0_available);
@@ -1549,7 +1556,7 @@ static void program_mode(unsigned long *dimm_populated,
 			       cas_3_0_available, cas_4_0_available, cas_5_0_available);
 			printf("sdram_freq=%d cycle3=%d cycle4=%d cycle5=%d\n\n",
 			       sdram_freq, cycle_3_0_clk, cycle_4_0_clk, cycle_5_0_clk);
-			hang();
+			HANG();
 		}
 	}
 
@@ -1658,7 +1665,7 @@ static void program_rtr(unsigned long *dimm_populated,
 				printf("ERROR: DIMM %d unsupported refresh rate/type.\n",
 				       (unsigned int)dimm_num);
 				printf("Replace the DIMM module with a supported DIMM.\n\n");
-				hang();
+				HANG();
 				break;
 			}
 
@@ -2066,7 +2073,7 @@ static void program_bxcf(unsigned long *dimm_populated,
 					printf("ERROR: Unsupported value for number of "
 					       "column addresses: %d.\n", (unsigned int)num_col_addr);
 					printf("Replace the DIMM module with a supported DIMM.\n\n");
-					hang();
+					HANG();
 				}
 			}
 
@@ -2148,7 +2155,7 @@ static void program_memory_queue(unsigned long *dimm_populated,
 				printf("ERROR: Unsupported value for the banksize: %d.\n",
 				       (unsigned int)rank_size_id);
 				printf("Replace the DIMM module with a supported DIMM.\n\n");
-				hang();
+				HANG();
 			}
 
 			if ((dimm_populated[dimm_num] != SDRAM_NONE) && (dimm_num == 1))
@@ -2693,7 +2700,7 @@ calibration_loop:
 		printf("\nERROR: Cannot determine a common read delay for the "
 		       "DIMM(s) installed.\n");
 		debug("%s[%d] ERROR : \n", __FUNCTION__,__LINE__);
-		hang();
+		HANG();
 	}
 
 	blank_string(strlen(str));
@@ -2849,7 +2856,7 @@ static void test(void)
 	if (window_found == FALSE) {
 		printf("ERROR: Cannot determine a common read delay for the "
 		       "DIMM(s) installed.\n");
-		hang();
+		HANG();
 	}
 
 	/*------------------------------------------------------------------

disk/part.c

@@ -180,7 +180,6 @@ void dev_print (block_dev_desc_t *dev_desc)
      (CONFIG_COMMANDS & CFG_CMD_SCSI)	|| \
      (CONFIG_COMMANDS & CFG_CMD_USB)	|| \
      defined(CONFIG_MMC)		|| \
-     (defined(CONFIG_MMC) && defined(CONFIG_LPC2292)) || \
      defined(CONFIG_SYSTEMACE)          )
 
 #if defined(CONFIG_MAC_PARTITION) || \

fs/fat/fat.c

@@ -70,10 +70,11 @@ int
 fat_register_device(block_dev_desc_t *dev_desc, int part_no)
 {
 	unsigned char buffer[SECTOR_SIZE];
+	disk_partition_t info;
 
 	if (!dev_desc->block_read)
 		return -1;
-	cur_dev=dev_desc;
+	cur_dev = dev_desc;
 	/* check if we have a MBR (on floppies we have only a PBR) */
 	if (dev_desc->block_read (dev_desc->dev, 0, 1, (ulong *) buffer) != 1) {
 		printf ("** Can't read from device %d **\n", dev_desc->dev);
@@ -84,36 +85,39 @@ fat_register_device(block_dev_desc_t *dev_desc, int part_no)
 		/* no signature found */
 		return -1;
 	}
-	if(!strncmp((char *)&buffer[DOS_FS_TYPE_OFFSET],"FAT",3)) {
-		/* ok, we assume we are on a PBR only */
-		cur_part = 1;
-		part_offset=0;
-	}
-	else {
 #if ((CONFIG_COMMANDS & CFG_CMD_IDE)	|| \
      (CONFIG_COMMANDS & CFG_CMD_SCSI)	|| \
      (CONFIG_COMMANDS & CFG_CMD_USB)	|| \
-     (defined(CONFIG_MMC) && defined(CONFIG_LPC2292)) || \
+     (defined(CONFIG_MMC)) || \
      defined(CONFIG_SYSTEMACE)          )
-		disk_partition_t info;
+	/* First we assume, there is a MBR */
-		if(!get_partition_info(dev_desc, part_no, &info)) {
+	if (!get_partition_info (dev_desc, part_no, &info)) {
 		part_offset = info.start;
 		cur_part = part_no;
-		}
+	} else if (!strncmp((char *)&buffer[DOS_FS_TYPE_OFFSET], "FAT", 3)) {
-		else {
+		/* ok, we assume we are on a PBR only */
-			printf ("** Partition %d not valid on device %d **\n",part_no,dev_desc->dev);
+		cur_part = 1;
+		part_offset = 0;
+	} else {
+		printf ("** Partition %d not valid on device %d **\n", part_no, dev_desc->dev);
 		return -1;
 	}
 #else
+	if(!strncmp((char *)&buffer[DOS_FS_TYPE_OFFSET],"FAT",3)) {
+ 		/* ok, we assume we are on a PBR only */
+ 		cur_part = 1;
+		part_offset = 0;
+		info.start = part_offset;
+	} else {
 		/* FIXME we need to determine the start block of the
 		 * partition where the DOS FS resides. This can be done
 		 * by using the get_partition_info routine. For this
 		 * purpose the libpart must be included.
 		 */
-		part_offset=32;
+		part_offset = 32;
 		cur_part = 1;
-#endif
 	}
+#endif
 	return 0;
 }
 

include/configs/pcs440ep.h

@@ -107,17 +107,25 @@
 #define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
 #define CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
 
+#define CONFIG_ENV_OVERWRITE	1
+
 /* Address and size of Redundant Environment Sector	*/
 #define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 #endif /* CFG_ENV_IS_IN_FLASH */
 
+#define ENV_NAME_REVLEV	"revision_level"
+#define ENV_NAME_SOLDER	"solder_switch"
+#define ENV_NAME_DIP	"dip"
+
 /*-----------------------------------------------------------------------
  * DDR SDRAM
  *----------------------------------------------------------------------*/
 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for setup             */
 #undef CONFIG_DDR_ECC			/* don't use ECC			*/
 #define SPD_EEPROM_ADDRESS      {0x50}
+#define	CONFIG_PROG_SDRAM_TLB	1
+#define CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG	1
 
 /*-----------------------------------------------------------------------
  * I2C
@@ -142,6 +150,8 @@
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
 	"netdev=eth0\0"							\
 	"hostname=pcs440ep\0"						\
+	"use_eeprom_ethaddr=default\0"					\
+	"cs_test=off\0"							\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
 		"nfsroot=${serverip}:${rootpath}\0"			\
 	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
@@ -172,6 +182,36 @@
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
 #endif
 
+#define CONFIG_PREBOOT	"echo;" \
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo"
+
+/* check U-Boot image with SHA1 sum */
+#define CONFIG_SHA1_CHECK_UB_IMG	1
+#define CONFIG_SHA1_START		CFG_MONITOR_BASE
+#define CONFIG_SHA1_LEN			CFG_MONITOR_LEN
+
+/*-----------------------------------------------------------------------
+ * Definitions for status LED
+ */
+#define CONFIG_STATUS_LED	1	/* Status LED enabled		*/
+#define CONFIG_BOARD_SPECIFIC_LED	1
+
+#define STATUS_LED_BIT		0x08			/* LED 1 is on GPIO_PPC_1 */
+#define STATUS_LED_PERIOD	((CFG_HZ / 2) / 5)	/* blink at 5 Hz */
+#define STATUS_LED_STATE	STATUS_LED_OFF
+#define STATUS_LED_BIT1		0x04			/* LED 2 is on GPIO_PPC_2 */
+#define STATUS_LED_PERIOD1	((CFG_HZ / 2) / 5)	/* blink at 5 Hz */
+#define STATUS_LED_STATE1	STATUS_LED_ON
+#define STATUS_LED_BIT2		0x02			/* LED 3 is on GPIO_PPC_3 */
+#define STATUS_LED_PERIOD2	((CFG_HZ / 2) / 5)	/* blink at 5 Hz */
+#define STATUS_LED_STATE2	STATUS_LED_OFF
+#define STATUS_LED_BIT3		0x01			/* LED 4 is on GPIO_PPC_4 */
+#define STATUS_LED_PERIOD3	((CFG_HZ / 2) / 5)	/* blink at 5 Hz */
+#define STATUS_LED_STATE3	STATUS_LED_OFF
+
+#define CONFIG_SHOW_BOOT_PROGRESS	1
+
 #define CONFIG_BAUDRATE		115200
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
@@ -213,7 +253,10 @@
 				CFG_CMD_DIAG	| \
 				CFG_CMD_EEPROM	| \
 				CFG_CMD_ELF	| \
+				CFG_CMD_EXT2	| \
+				CFG_CMD_FAT	| \
 				CFG_CMD_I2C	| \
+				CFG_CMD_IDE	| \
 				CFG_CMD_IRQ	| \
 				CFG_CMD_MII	| \
 				CFG_CMD_NET	| \
@@ -221,9 +264,8 @@
 				CFG_CMD_PCI	| \
 				CFG_CMD_PING	| \
 				CFG_CMD_REGINFO	| \
+				CFG_CMD_REISER	| \
 				CFG_CMD_SDRAM	| \
-				CFG_CMD_EXT2	| \
-				CFG_CMD_FAT	| \
 				CFG_CMD_USB	)
 
 
@@ -410,4 +452,39 @@
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff Supports IDE harddisk
+ *-----------------------------------------------------------------------
+ */
+
+#undef  CONFIG_IDE_8xx_PCCARD		/* Use IDE with PC Card	Adapter	*/
+
+#undef  CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
+#undef  CONFIG_IDE_LED			/* LED   for ide not supported	*/
+
+#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CFG_IDE_MAXDEVICE	1	/* max. 2 drives per IDE bus	*/
+
+#define CONFIG_IDE_PREINIT	1
+#define CONFIG_IDE_RESET	1
+
+#define CFG_ATA_IDE0_OFFSET	0x0000
+
+#define CFG_ATA_BASE_ADDR	CFG_CF1
+
+/* Offset for data I/O			*/
+#define CFG_ATA_DATA_OFFSET	0
+
+/* Offset for normal register accesses	*/
+#define CFG_ATA_REG_OFFSET	(CFG_ATA_DATA_OFFSET)
+
+/* Offset for alternate registers	*/
+#define CFG_ATA_ALT_OFFSET	(0x0000)
+
+/* This addresses need to be shifted one place to the left
+ * ( bus per_addr 20 -30 is connectsd on CF bus A10-A0)
+ * This values are shifted 
+ */
+#define CFG_ATA_PORT_ADDR(port) ((port) << 1)
+
 #endif	/* __CONFIG_H */

include/sha1.h

@@ -0,0 +1,115 @@
+/**
+ * \file sha1.h
+ * based from http://xyssl.org/code/source/sha1/
+ *  FIPS-180-1 compliant SHA-1 implementation
+ *
+ *  Copyright (C) 2003-2006  Christophe Devine
+ *
+ *  This library is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU Lesser General Public
+ *  License, version 2.1 as published by the Free Software Foundation.
+ *
+ *  This library is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  Lesser General Public License for more details.
+ *
+ *  You should have received a copy of the GNU Lesser General Public
+ *  License along with this library; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ *  MA  02110-1301  USA
+ */
+/*
+ *  The SHA-1 standard was published by NIST in 1993.
+ *
+ *  http://www.itl.nist.gov/fipspubs/fip180-1.htm
+ */
+#ifndef _SHA1_H
+#define _SHA1_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define SHA1_SUM_POS	-0x20
+#define SHA1_SUM_LEN	20
+
+/**
+ * \brief          SHA-1 context structure
+ */
+typedef struct
+{
+    unsigned long total[2];     /*!< number of bytes processed  */
+    unsigned long state[5];     /*!< intermediate digest state  */
+    unsigned char buffer[64];   /*!< data block being processed */
+}
+sha1_context;
+
+/**
+ * \brief          SHA-1 context setup
+ *
+ * \param ctx      SHA-1 context to be initialized
+ */
+void sha1_starts( sha1_context *ctx );
+
+/**
+ * \brief          SHA-1 process buffer
+ *
+ * \param ctx      SHA-1 context
+ * \param input    buffer holding the  data
+ * \param ilen     length of the input data
+ */
+void sha1_update( sha1_context *ctx, unsigned char *input, int ilen );
+
+/**
+ * \brief          SHA-1 final digest
+ *
+ * \param ctx      SHA-1 context
+ * \param output   SHA-1 checksum result
+ */
+void sha1_finish( sha1_context *ctx, unsigned char output[20] );
+
+/**
+ * \brief          Output = SHA-1( input buffer )
+ *
+ * \param input    buffer holding the  data
+ * \param ilen     length of the input data
+ * \param output   SHA-1 checksum result
+ */
+void sha1_csum( unsigned char *input, int ilen,
+                unsigned char output[20] );
+
+/**
+ * \brief          Output = SHA-1( file contents )
+ *
+ * \param path     input file name
+ * \param output   SHA-1 checksum result
+ * \return         0 if successful, or 1 if fopen failed
+ */
+int sha1_file( char *path, unsigned char output[20] );
+
+/**
+ * \brief          Output = HMAC-SHA-1( input buffer, hmac key )
+ *
+ * \param key      HMAC secret key
+ * \param keylen   length of the HMAC key
+ * \param input    buffer holding the  data
+ * \param ilen     length of the input data
+ * \param output   HMAC-SHA-1 result
+ */
+void sha1_hmac( unsigned char *key, int keylen,
+                unsigned char *input, int ilen,
+                unsigned char output[20] );
+
+/**
+ * \brief          Checkup routine
+ *
+ * \return         0 if successful, or 1 if the test failed
+ */
+int sha1_self_test( void );
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* sha1.h */

include/status_led.h

@@ -367,6 +367,13 @@ void status_led_set  (int led, int state);
 
 #define STATUS_LED_BOOT		0	/* LED 0 used for boot status */
 
+#elif defined(CONFIG_BOARD_SPECIFIC_LED)
+/* led_id_t is unsigned long mask */
+typedef unsigned long led_id_t;
+
+extern void __led_toggle (led_id_t mask);
+extern void __led_init (led_id_t mask, int state);
+extern void __led_set (led_id_t mask, int state);
 #else
 # error Status LED configuration missing
 #endif

lib_generic/Makefile

@@ -27,7 +27,7 @@ LIB	= $(obj)libgeneric.a
 
 COBJS	= bzlib.o bzlib_crctable.o bzlib_decompress.o \
 	  bzlib_randtable.o bzlib_huffman.o \
-	  crc32.o ctype.o display_options.o ldiv.o \
+	  crc32.o ctype.o display_options.o ldiv.o sha1.o \
 	  string.o vsprintf.o zlib.o
 
 SRCS 	:= $(COBJS:.o=.c)

lib_generic/sha1.c

@@ -0,0 +1,430 @@
+/*
+ *  Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *  based on:
+ *  FIPS-180-1 compliant SHA-1 implementation
+ *
+ *  Copyright (C) 2003-2006  Christophe Devine
+ *
+ *  This library is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU Lesser General Public
+ *  License, version 2.1 as published by the Free Software Foundation.
+ *
+ *  This library is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  Lesser General Public License for more details.
+ *
+ *  You should have received a copy of the GNU Lesser General Public
+ *  License along with this library; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ *  MA  02110-1301  USA
+ */
+/*
+ *  The SHA-1 standard was published by NIST in 1993.
+ *
+ *  http://www.itl.nist.gov/fipspubs/fip180-1.htm
+ */
+
+#ifndef _CRT_SECURE_NO_DEPRECATE
+#define _CRT_SECURE_NO_DEPRECATE 1
+#endif
+
+#include <linux/string.h>
+#include "sha1.h"
+
+/*
+ * 32-bit integer manipulation macros (big endian)
+ */
+#ifndef GET_UINT32_BE
+#define GET_UINT32_BE(n,b,i)                            \
+{                                                       \
+    (n) = ( (unsigned long) (b)[(i)    ] << 24 )        \
+        | ( (unsigned long) (b)[(i) + 1] << 16 )        \
+        | ( (unsigned long) (b)[(i) + 2] <<  8 )        \
+        | ( (unsigned long) (b)[(i) + 3]       );       \
+}
+#endif
+#ifndef PUT_UINT32_BE
+#define PUT_UINT32_BE(n,b,i)                            \
+{                                                       \
+    (b)[(i)    ] = (unsigned char) ( (n) >> 24 );       \
+    (b)[(i) + 1] = (unsigned char) ( (n) >> 16 );       \
+    (b)[(i) + 2] = (unsigned char) ( (n) >>  8 );       \
+    (b)[(i) + 3] = (unsigned char) ( (n)       );       \
+}
+#endif
+
+/*
+ * SHA-1 context setup
+ */
+void sha1_starts( sha1_context *ctx )
+{
+    ctx->total[0] = 0;
+    ctx->total[1] = 0;
+
+    ctx->state[0] = 0x67452301;
+    ctx->state[1] = 0xEFCDAB89;
+    ctx->state[2] = 0x98BADCFE;
+    ctx->state[3] = 0x10325476;
+    ctx->state[4] = 0xC3D2E1F0;
+}
+
+static void sha1_process( sha1_context *ctx, unsigned char data[64] )
+{
+    unsigned long temp, W[16], A, B, C, D, E;
+
+    GET_UINT32_BE( W[0],  data,  0 );
+    GET_UINT32_BE( W[1],  data,  4 );
+    GET_UINT32_BE( W[2],  data,  8 );
+    GET_UINT32_BE( W[3],  data, 12 );
+    GET_UINT32_BE( W[4],  data, 16 );
+    GET_UINT32_BE( W[5],  data, 20 );
+    GET_UINT32_BE( W[6],  data, 24 );
+    GET_UINT32_BE( W[7],  data, 28 );
+    GET_UINT32_BE( W[8],  data, 32 );
+    GET_UINT32_BE( W[9],  data, 36 );
+    GET_UINT32_BE( W[10], data, 40 );
+    GET_UINT32_BE( W[11], data, 44 );
+    GET_UINT32_BE( W[12], data, 48 );
+    GET_UINT32_BE( W[13], data, 52 );
+    GET_UINT32_BE( W[14], data, 56 );
+    GET_UINT32_BE( W[15], data, 60 );
+
+#define S(x,n) ((x << n) | ((x & 0xFFFFFFFF) >> (32 - n)))
+
+#define R(t)                                            \
+(                                                       \
+    temp = W[(t -  3) & 0x0F] ^ W[(t - 8) & 0x0F] ^     \
+           W[(t - 14) & 0x0F] ^ W[ t      & 0x0F],      \
+    ( W[t & 0x0F] = S(temp,1) )                         \
+)
+
+#define P(a,b,c,d,e,x)                                  \
+{                                                       \
+    e += S(a,5) + F(b,c,d) + K + x; b = S(b,30);        \
+}
+
+    A = ctx->state[0];
+    B = ctx->state[1];
+    C = ctx->state[2];
+    D = ctx->state[3];
+    E = ctx->state[4];
+
+#define F(x,y,z) (z ^ (x & (y ^ z)))
+#define K 0x5A827999
+
+    P( A, B, C, D, E, W[0]  );
+    P( E, A, B, C, D, W[1]  );
+    P( D, E, A, B, C, W[2]  );
+    P( C, D, E, A, B, W[3]  );
+    P( B, C, D, E, A, W[4]  );
+    P( A, B, C, D, E, W[5]  );
+    P( E, A, B, C, D, W[6]  );
+    P( D, E, A, B, C, W[7]  );
+    P( C, D, E, A, B, W[8]  );
+    P( B, C, D, E, A, W[9]  );
+    P( A, B, C, D, E, W[10] );
+    P( E, A, B, C, D, W[11] );
+    P( D, E, A, B, C, W[12] );
+    P( C, D, E, A, B, W[13] );
+    P( B, C, D, E, A, W[14] );
+    P( A, B, C, D, E, W[15] );
+    P( E, A, B, C, D, R(16) );
+    P( D, E, A, B, C, R(17) );
+    P( C, D, E, A, B, R(18) );
+    P( B, C, D, E, A, R(19) );
+
+#undef K
+#undef F
+
+#define F(x,y,z) (x ^ y ^ z)
+#define K 0x6ED9EBA1
+
+    P( A, B, C, D, E, R(20) );
+    P( E, A, B, C, D, R(21) );
+    P( D, E, A, B, C, R(22) );
+    P( C, D, E, A, B, R(23) );
+    P( B, C, D, E, A, R(24) );
+    P( A, B, C, D, E, R(25) );
+    P( E, A, B, C, D, R(26) );
+    P( D, E, A, B, C, R(27) );
+    P( C, D, E, A, B, R(28) );
+    P( B, C, D, E, A, R(29) );
+    P( A, B, C, D, E, R(30) );
+    P( E, A, B, C, D, R(31) );
+    P( D, E, A, B, C, R(32) );
+    P( C, D, E, A, B, R(33) );
+    P( B, C, D, E, A, R(34) );
+    P( A, B, C, D, E, R(35) );
+    P( E, A, B, C, D, R(36) );
+    P( D, E, A, B, C, R(37) );
+    P( C, D, E, A, B, R(38) );
+    P( B, C, D, E, A, R(39) );
+
+#undef K
+#undef F
+
+#define F(x,y,z) ((x & y) | (z & (x | y)))
+#define K 0x8F1BBCDC
+
+    P( A, B, C, D, E, R(40) );
+    P( E, A, B, C, D, R(41) );
+    P( D, E, A, B, C, R(42) );
+    P( C, D, E, A, B, R(43) );
+    P( B, C, D, E, A, R(44) );
+    P( A, B, C, D, E, R(45) );
+    P( E, A, B, C, D, R(46) );
+    P( D, E, A, B, C, R(47) );
+    P( C, D, E, A, B, R(48) );
+    P( B, C, D, E, A, R(49) );
+    P( A, B, C, D, E, R(50) );
+    P( E, A, B, C, D, R(51) );
+    P( D, E, A, B, C, R(52) );
+    P( C, D, E, A, B, R(53) );
+    P( B, C, D, E, A, R(54) );
+    P( A, B, C, D, E, R(55) );
+    P( E, A, B, C, D, R(56) );
+    P( D, E, A, B, C, R(57) );
+    P( C, D, E, A, B, R(58) );
+    P( B, C, D, E, A, R(59) );
+
+#undef K
+#undef F
+
+#define F(x,y,z) (x ^ y ^ z)
+#define K 0xCA62C1D6
+
+    P( A, B, C, D, E, R(60) );
+    P( E, A, B, C, D, R(61) );
+    P( D, E, A, B, C, R(62) );
+    P( C, D, E, A, B, R(63) );
+    P( B, C, D, E, A, R(64) );
+    P( A, B, C, D, E, R(65) );
+    P( E, A, B, C, D, R(66) );
+    P( D, E, A, B, C, R(67) );
+    P( C, D, E, A, B, R(68) );
+    P( B, C, D, E, A, R(69) );
+    P( A, B, C, D, E, R(70) );
+    P( E, A, B, C, D, R(71) );
+    P( D, E, A, B, C, R(72) );
+    P( C, D, E, A, B, R(73) );
+    P( B, C, D, E, A, R(74) );
+    P( A, B, C, D, E, R(75) );
+    P( E, A, B, C, D, R(76) );
+    P( D, E, A, B, C, R(77) );
+    P( C, D, E, A, B, R(78) );
+    P( B, C, D, E, A, R(79) );
+
+#undef K
+#undef F
+
+    ctx->state[0] += A;
+    ctx->state[1] += B;
+    ctx->state[2] += C;
+    ctx->state[3] += D;
+    ctx->state[4] += E;
+}
+
+/*
+ * SHA-1 process buffer
+ */
+void sha1_update( sha1_context *ctx, unsigned char *input, int ilen )
+{
+    int fill;
+    unsigned long left;
+
+    if( ilen <= 0 )
+        return;
+
+    left = ctx->total[0] & 0x3F;
+    fill = 64 - left;
+
+    ctx->total[0] += ilen;
+    ctx->total[0] &= 0xFFFFFFFF;
+
+    if( ctx->total[0] < (unsigned long) ilen )
+        ctx->total[1]++;
+
+    if( left && ilen >= fill )
+    {
+        memcpy( (void *) (ctx->buffer + left),
+                (void *) input, fill );
+        sha1_process( ctx, ctx->buffer );
+        input += fill;
+        ilen  -= fill;
+        left = 0;
+    }
+
+    while( ilen >= 64 )
+    {
+        sha1_process( ctx, input );
+        input += 64;
+        ilen  -= 64;
+    }
+
+    if( ilen > 0 )
+    {
+        memcpy( (void *) (ctx->buffer + left),
+                (void *) input, ilen );
+    }
+}
+
+static const unsigned char sha1_padding[64] =
+{
+ 0x80, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
+};
+
+/*
+ * SHA-1 final digest
+ */
+void sha1_finish( sha1_context *ctx, unsigned char output[20] )
+{
+    unsigned long last, padn;
+    unsigned long high, low;
+    unsigned char msglen[8];
+
+    high = ( ctx->total[0] >> 29 )
+         | ( ctx->total[1] <<  3 );
+    low  = ( ctx->total[0] <<  3 );
+
+    PUT_UINT32_BE( high, msglen, 0 );
+    PUT_UINT32_BE( low,  msglen, 4 );
+
+    last = ctx->total[0] & 0x3F;
+    padn = ( last < 56 ) ? ( 56 - last ) : ( 120 - last );
+
+    sha1_update( ctx, (unsigned char *) sha1_padding, padn );
+    sha1_update( ctx, msglen, 8 );
+
+    PUT_UINT32_BE( ctx->state[0], output,  0 );
+    PUT_UINT32_BE( ctx->state[1], output,  4 );
+    PUT_UINT32_BE( ctx->state[2], output,  8 );
+    PUT_UINT32_BE( ctx->state[3], output, 12 );
+    PUT_UINT32_BE( ctx->state[4], output, 16 );
+}
+
+/*
+ * Output = SHA-1( input buffer )
+ */
+void sha1_csum( unsigned char *input, int ilen,
+                unsigned char output[20] )
+{
+    sha1_context ctx;
+
+    sha1_starts( &ctx );
+    sha1_update( &ctx, input, ilen );
+    sha1_finish( &ctx, output );
+}
+
+/*
+ * Output = HMAC-SHA-1( input buffer, hmac key )
+ */
+void sha1_hmac( unsigned char *key, int keylen,
+                unsigned char *input, int ilen,
+                unsigned char output[20] )
+{
+    int i;
+    sha1_context ctx;
+    unsigned char k_ipad[64];
+    unsigned char k_opad[64];
+    unsigned char tmpbuf[20];
+
+    memset( k_ipad, 0x36, 64 );
+    memset( k_opad, 0x5C, 64 );
+
+    for( i = 0; i < keylen; i++ )
+    {
+        if( i >= 64 ) break;
+
+        k_ipad[i] ^= key[i];
+        k_opad[i] ^= key[i];
+    }
+
+    sha1_starts( &ctx );
+    sha1_update( &ctx, k_ipad, 64 );
+    sha1_update( &ctx, input, ilen );
+    sha1_finish( &ctx, tmpbuf );
+
+    sha1_starts( &ctx );
+    sha1_update( &ctx, k_opad, 64 );
+    sha1_update( &ctx, tmpbuf, 20 );
+    sha1_finish( &ctx, output );
+
+    memset( k_ipad, 0, 64 );
+    memset( k_opad, 0, 64 );
+    memset( tmpbuf, 0, 20 );
+    memset( &ctx, 0, sizeof( sha1_context ) );
+}
+
+static const char _sha1_src[] = "_sha1_src";
+
+#ifdef SELF_TEST
+/*
+ * FIPS-180-1 test vectors
+ */
+static const char sha1_test_str[3][57] = 
+{
+    { "abc" },
+    { "abcdbcdecdefdefgefghfghighijhijkijkljklmklmnlmnomnopnopq" },
+    { "" }
+};
+
+static const unsigned char sha1_test_sum[3][20] =
+{
+    { 0xA9, 0x99, 0x3E, 0x36, 0x47, 0x06, 0x81, 0x6A, 0xBA, 0x3E,
+      0x25, 0x71, 0x78, 0x50, 0xC2, 0x6C, 0x9C, 0xD0, 0xD8, 0x9D },
+    { 0x84, 0x98, 0x3E, 0x44, 0x1C, 0x3B, 0xD2, 0x6E, 0xBA, 0xAE,
+      0x4A, 0xA1, 0xF9, 0x51, 0x29, 0xE5, 0xE5, 0x46, 0x70, 0xF1 },
+    { 0x34, 0xAA, 0x97, 0x3C, 0xD4, 0xC4, 0xDA, 0xA4, 0xF6, 0x1E,
+      0xEB, 0x2B, 0xDB, 0xAD, 0x27, 0x31, 0x65, 0x34, 0x01, 0x6F }
+};
+
+/*
+ * Checkup routine
+ */
+int sha1_self_test( void )
+{
+    int i, j;
+    unsigned char buf[1000];
+    unsigned char sha1sum[20];
+    sha1_context ctx;
+
+    for( i = 0; i < 3; i++ )
+    {
+        printf( "  SHA-1 test #%d: ", i + 1 );
+
+        sha1_starts( &ctx );
+
+        if( i < 2 )
+            sha1_update( &ctx, (unsigned char *) sha1_test_str[i],
+                         strlen( sha1_test_str[i] ) );
+        else
+        {
+            memset( buf, 'a', 1000 );
+            for( j = 0; j < 1000; j++ )
+                sha1_update( &ctx, buf, 1000 );
+        }
+
+        sha1_finish( &ctx, sha1sum );
+
+        if( memcmp( sha1sum, sha1_test_sum[i], 20 ) != 0 )
+        {
+            printf( "failed\n" );
+            return( 1 );
+        }
+
+        printf( "passed\n" );
+    }
+
+    printf( "\n" );
+    return( 0 );
+}
+#else
+int sha1_self_test( void )
+{
+    return( 0 );
+}
+#endif

lib_ppc/board.c

@@ -896,7 +896,8 @@ void board_init_r (gd_t *id, ulong dest_addr)
 
 #if defined(CONFIG_TQM8xxL) || defined(CONFIG_TQM8260) || \
     defined(CONFIG_TQM8272) || \
-    defined(CONFIG_CCM) || defined(CONFIG_KUP4K) || defined(CONFIG_KUP4X)
+    defined(CONFIG_CCM) || defined(CONFIG_KUP4K) || \
+    defined(CONFIG_KUP4X) || defined(CONFIG_PCS440EP)
 	load_sernum_ethaddr ();
 #endif
 	/* IP Address */
@@ -961,7 +962,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	serial_buffered_init();
 #endif
 
-#ifdef CONFIG_STATUS_LED
+#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
 	status_led_set (STATUS_LED_BOOT, STATUS_LED_BLINKING);
 #endif
 

net/eth.c

@@ -28,6 +28,14 @@
 
 #if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI)
 
+#if defined(CONFIG_SHOW_BOOT_PROGRESS)
+# include <status_led.h>
+extern void show_ethcfg_progress (int arg);
+# define SHOW_BOOT_PROGRESS(arg)	show_boot_progress (arg)
+#else
+# define SHOW_BOOT_PROGRESS(arg)
+#endif
+
 #ifdef CFG_GT_6426x
 extern int gt6426x_eth_initialize(bd_t *bis);
 #endif
@@ -142,6 +150,7 @@ int eth_initialize(bd_t *bis)
 	eth_devices = NULL;
 	eth_current = NULL;
 
+	SHOW_BOOT_PROGRESS(64);
 #if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
 	miiphy_init();
 #endif
@@ -270,10 +279,12 @@ int eth_initialize(bd_t *bis)
 
 	if (!eth_devices) {
 		puts ("No ethernet found.\n");
+		SHOW_BOOT_PROGRESS(-64);
 	} else {
 		struct eth_device *dev = eth_devices;
 		char *ethprime = getenv ("ethprime");
 
+		SHOW_BOOT_PROGRESS(65);
 		do {
 			if (eth_number)
 				puts (", ");

tools/Makefile

@@ -21,10 +21,10 @@
 # MA 02111-1307 USA
 #
 
-BIN_FILES	= img2srec$(SFX) mkimage$(SFX) envcrc$(SFX) gen_eth_addr$(SFX) bmp_logo$(SFX)
+BIN_FILES	= img2srec$(SFX) mkimage$(SFX) envcrc$(SFX) ubsha1$(SFX) gen_eth_addr$(SFX) bmp_logo$(SFX)
 
-OBJ_LINKS	= environment.o crc32.o
+OBJ_LINKS	= environment.o crc32.o sha1.o
-OBJ_FILES	= img2srec.o mkimage.o envcrc.o gen_eth_addr.o bmp_logo.o
+OBJ_FILES	= img2srec.o mkimage.o envcrc.o ubsha1.o gen_eth_addr.o bmp_logo.o
 
 ifeq ($(ARCH),mips)
 BIN_FILES	+= inca-swap-bytes$(SFX)
@@ -126,14 +126,17 @@ MAKEDEPEND = makedepend
 
 all:	$(obj).depend $(BINS) $(LOGO_H) subdirs
 
-$(obj)envcrc$(SFX):	$(obj)envcrc.o $(obj)crc32.o $(obj)environment.o
+$(obj)envcrc$(SFX):	$(obj)envcrc.o $(obj)crc32.o $(obj)environment.o $(obj)sha1.o
+		$(CC) $(CFLAGS) -o $@ $^
+
+$(obj)ubsha1$(SFX):	$(obj)ubsha1.o $(obj)sha1.o
 		$(CC) $(CFLAGS) -o $@ $^
 
 $(obj)img2srec$(SFX):	$(obj)img2srec.o
 		$(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^
 		$(STRIP) $@
 
-$(obj)mkimage$(SFX):	$(obj)mkimage.o $(obj)crc32.o
+$(obj)mkimage$(SFX):	$(obj)mkimage.o $(obj)crc32.o $(obj)sha1.o
 		$(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^
 		$(STRIP) $@
 
@@ -160,9 +163,15 @@ $(obj)mpc86x_clk$(SFX):	$(obj)mpc86x_clk.o
 $(obj)envcrc.o:	$(src)envcrc.c
 		$(CC) -g $(CFLAGS) -c -o $@ $<
 
+$(obj)ubsha1.o:	$(src)ubsha1.c
+		$(CC) -g $(CFLAGS) -c -o $@ $<
+
 $(obj)crc32.o:	$(obj)crc32.c
 		$(CC) -g $(CFLAGS) -c -o $@ $<
 
+$(obj)sha1.o:	$(obj)sha1.c
+		$(CC) -g $(CFLAGS) -c -o $@ $<
+
 $(obj)mkimage.o:	$(src)mkimage.c
 		$(CC) -g $(CFLAGS) -c -o $@ $<
 
@@ -203,6 +212,10 @@ $(obj)crc32.c:
 		@rm -f $(obj)crc32.c
 		ln -s $(src)../lib_generic/crc32.c $(obj)crc32.c
 
+$(obj)sha1.c:
+		@rm -f $(obj)sha1.c
+		ln -s $(src)../lib_generic/sha1.c $(obj)sha1.c
+
 $(LOGO_H):	$(obj)bmp_logo $(LOGO_BMP)
 		$(obj)./bmp_logo $(LOGO_BMP) >$@
 

tools/ubsha1.c

@@ -0,0 +1,119 @@
+/*
+ * (C) Copyright 2007
+ * Heiko Schocher, DENX Software Engineering, <hs@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <errno.h>
+#include <string.h>
+#include <sys/mman.h>
+#include <sys/stat.h>
+#include "sha1.h"
+
+#ifndef __ASSEMBLY__
+#define	__ASSEMBLY__		/* Dirty trick to get only #defines	*/
+#endif
+#include <config.h>
+#undef	__ASSEMBLY__
+
+#ifndef	O_BINARY		/* should be define'd on __WIN32__ */
+#define O_BINARY	0
+#endif
+
+#ifndef MAP_FAILED
+#define MAP_FAILED (-1)
+#endif
+
+extern int errno;
+
+extern void sha1_csum (unsigned char *input, int ilen, unsigned char output[20]);
+
+int main (int argc, char **argv)
+{
+	unsigned char output[20];
+	int i, len;
+
+	char	*imagefile;
+	char	*cmdname = *argv;
+	unsigned char	*ptr;
+	unsigned char	*data;
+	struct stat sbuf;
+	unsigned char	*ptroff;
+	int	ifd;
+	int	off;
+
+	if (argc > 1) {
+		imagefile = argv[1];
+		ifd = open (imagefile, O_RDWR|O_BINARY);
+		if (ifd < 0) {
+			fprintf (stderr, "%s: Can't open %s: %s\n",
+				cmdname, imagefile, strerror(errno));
+			exit (EXIT_FAILURE);
+		}
+		if (fstat (ifd, &sbuf) < 0) {
+			fprintf (stderr, "%s: Can't stat %s: %s\n",
+				cmdname, imagefile, strerror(errno));
+			exit (EXIT_FAILURE);
+		}
+		len = sbuf.st_size;
+		ptr = (unsigned char *)mmap(0, len,
+				    PROT_READ, MAP_SHARED, ifd, 0);
+		if (ptr == (unsigned char *)MAP_FAILED) {
+			fprintf (stderr, "%s: Can't read %s: %s\n",
+				cmdname, imagefile, strerror(errno));
+			exit (EXIT_FAILURE);
+		}
+	
+		/* create a copy, so we can blank out the sha1 sum */
+		data = malloc (len);
+		memcpy (data, ptr, len);
+		off = SHA1_SUM_POS;
+		ptroff = &data[len +  off];
+		for (i = 0; i < SHA1_SUM_LEN; i++) {
+			ptroff[i] = 0;
+		}
+	
+		sha1_csum ((unsigned char *) data, len, (unsigned char *)output);
+
+		printf ("U-Boot sum:\n");
+	        for (i = 0; i < 20 ; i++)
+	        {
+	            printf ("%02X ", output[i]);
+	        }
+	        printf ("\n");
+		/* overwrite the sum in the bin file, with the actual */
+		lseek (ifd, SHA1_SUM_POS, SEEK_END);
+		if (write (ifd, output, SHA1_SUM_LEN) != SHA1_SUM_LEN) {
+			fprintf (stderr, "%s: Can't write %s: %s\n",
+				cmdname, imagefile, strerror(errno));
+			exit (EXIT_FAILURE);
+		}
+	
+		free (data);
+		(void) munmap((void *)ptr, len);
+		(void) close (ifd);
+	}
+
+	return EXIT_SUCCESS;
+}