diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index b8b45a048c..e677211b2e 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -6,21 +6,8 @@ config 88F5182 config FEROCEON bool -choice - prompt "Marvell Orion board select" - optional - -config TARGET_EDMINIV2 - bool "LaCie Ethernet Disk mini V2" - select 88F5182 - select FEROCEON - select SUPPORT_SPL - -endchoice - config SYS_SOC default "orion5x" -source "board/LaCie/edminiv2/Kconfig" endif diff --git a/board/LaCie/edminiv2/Kconfig b/board/LaCie/edminiv2/Kconfig deleted file mode 100644 index ac3fe3fbcb..0000000000 --- a/board/LaCie/edminiv2/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_EDMINIV2 - -config SYS_BOARD - default "edminiv2" - -config SYS_VENDOR - default "LaCie" - -config SYS_CONFIG_NAME - default "edminiv2" - -endif diff --git a/board/LaCie/edminiv2/MAINTAINERS b/board/LaCie/edminiv2/MAINTAINERS deleted file mode 100644 index 055afd0e76..0000000000 --- a/board/LaCie/edminiv2/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -EDMINIV2 BOARD -M: Simon Guinot -S: Maintained -F: board/LaCie/edminiv2/ -F: include/configs/edminiv2.h -F: configs/edminiv2_defconfig diff --git a/board/LaCie/edminiv2/Makefile b/board/LaCie/edminiv2/Makefile deleted file mode 100644 index 5252c2b0e6..0000000000 --- a/board/LaCie/edminiv2/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2010 Albert ARIBAUD -# -# Based on original Kirkwood support which is -# (C) Copyright 2009 -# Marvell Semiconductor -# Written-by: Prafulla Wadaskar - -obj-y := edminiv2.o ../common/common.o diff --git a/board/LaCie/edminiv2/edminiv2.c b/board/LaCie/edminiv2/edminiv2.c deleted file mode 100644 index 9c066a283c..0000000000 --- a/board/LaCie/edminiv2/edminiv2.c +++ /dev/null @@ -1,57 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2010 Albert ARIBAUD - * - * (C) Copyright 2009 - * Marvell Semiconductor - * Written-by: Prafulla Wadaskar - */ - -#include -#include -#include -#include -#include -#include "../common/common.h" -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -int board_init(void) -{ - /* arch number of board */ - gd->bd->bi_arch_number = MACH_TYPE_EDMINI_V2; - - /* boot parameter start at 256th byte of RAM base */ - gd->bd->bi_boot_params = gd->bd->bi_dram[0].start + 0x100; - - return 0; -} - -#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R) -/* Configure and enable MV88E1116 PHY */ -void reset_phy(void) -{ - mv_phy_88e1116_init("egiga0", 8); -} -#endif /* CONFIG_RESET_PHY_R */ - -/* - * SPL serial setup and NOR boot device selection - */ - -#ifdef CONFIG_SPL_BUILD - -void spl_board_init(void) -{ - preloader_console_init(); -} - -u32 spl_boot_device(void) -{ - return BOOT_DEVICE_NOR; -} - -#endif /* CONFIG_SPL_BUILD */ diff --git a/configs/edminiv2_defconfig b/configs/edminiv2_defconfig deleted file mode 100644 index 1cd0ac020b..0000000000 --- a/configs/edminiv2_defconfig +++ /dev/null @@ -1,72 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_CPU_INIT=y -CONFIG_ARCH_ORION5X=y -CONFIG_SYS_TEXT_BASE=0x00800000 -CONFIG_SYS_MALLOC_LEN=0x40000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_NR_DRAM_BANKS=1 -CONFIG_SPL_LDSCRIPT="arch/arm/mach-orion5x/u-boot-spl.lds" -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_SECT_SIZE=0x2000 -CONFIG_SPL_TEXT_BASE=0xffff0000 -CONFIG_TARGET_EDMINIV2=y -CONFIG_SPL_SERIAL=y -CONFIG_SPL=y -CONFIG_IDENT_STRING=" EDMiniV2" -CONFIG_SYS_LOAD_ADDR=0x800000 -CONFIG_ENV_ADDR=0xFFF84000 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xf40 -CONFIG_BOOTDELAY=3 -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_ARCH_MISC_INIT=y -CONFIG_RESET_PHY_R=y -CONFIG_SPL_MAX_SIZE=0xfff0 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x20000 -CONFIG_SPL_BSS_MAX_SIZE=0x1ffff -CONFIG_SPL_BOARD_INIT=y -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SPL_STACK=0x20000 -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x40000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x1ffff -CONFIG_SPL_NOR_SUPPORT=y -CONFIG_HUSH_PARSER=y -# CONFIG_AUTO_COMPLETE is not set -CONFIG_SYS_PROMPT="EDMiniV2> " -CONFIG_SYS_PBSIZE=1051 -CONFIG_CMD_IMLS=y -CONFIG_CMD_IDE=y -CONFIG_CMD_I2C=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_EXT2=y -CONFIG_ISO_PARTITION=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_FLASH=y -CONFIG_NETCONSOLE=y -CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y -CONFIG_SYS_IDE_MAXBUS=1 -CONFIG_SYS_IDE_MAXDEVICE=1 -CONFIG_SYS_ATA_BASE_ADDR=0xf1080000 -CONFIG_SYS_ATA_STRIDE=4 -CONFIG_SYS_ATA_DATA_OFFSET=0x100 -CONFIG_SYS_ATA_REG_OFFSET=0x100 -CONFIG_SYS_ATA_ALT_OFFSET=0x100 -CONFIG_SYS_ATA_IDE0_OFFSET=0x4000 -CONFIG_LBA48=y -CONFIG_SYS_I2C_LEGACY=y -CONFIG_SPL_SYS_I2C_LEGACY=y -CONFIG_SYS_I2C_MVTWSI=y -CONFIG_SYS_I2C_SLAVE=0x0 -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_MAX_FLASH_SECT=11 -CONFIG_MVGBE=y -CONFIG_MII=y -CONFIG_SYS_NS16550=y -CONFIG_USB=y diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h deleted file mode 100644 index d2f1cd5d5c..0000000000 --- a/include/configs/edminiv2.h +++ /dev/null @@ -1,134 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2010 Albert ARIBAUD - * - * Based on original Kirkwood support which is - * (C) Copyright 2009 - * Marvell Semiconductor - * Written-by: Prafulla Wadaskar - */ - -#ifndef _CONFIG_EDMINIV2_H -#define _CONFIG_EDMINIV2_H - -/* - * SPL - */ - -#define CONFIG_SYS_UBOOT_BASE 0xfff90000 -#define CONFIG_SYS_UBOOT_START 0x00800000 - -/* - * High Level Configuration Options (easy to change) - */ - -#include -/* - * CLKs configurations - */ - -/* - * Board-specific values for Orion5x MPP low level init: - * - MPPs 12 to 15 are SATA LEDs (mode 5) - * - Others are GPIO/unused (mode 3 for MPP0, mode 5 for - * MPP16 to MPP19, mode 0 for others - */ - -#define ORION5X_MPP0_7 0x00000003 -#define ORION5X_MPP8_15 0x55550000 -#define ORION5X_MPP16_23 0x00005555 - -/* - * Board-specific values for Orion5x GPIO low level init: - * - GPIO3 is input (RTC interrupt) - * - GPIO16 is Power LED control (0 = on, 1 = off) - * - GPIO17 is Power LED source select (0 = CPLD, 1 = GPIO16) - * - GPIO18 is Power Button status (0 = Released, 1 = Pressed) - * - GPIO19 is SATA disk power toggle (toggles on 0-to-1) - * - GPIO22 is SATA disk power status () - * - GPIO23 is supply status for SATA disk () - * - GPIO24 is supply control for board (write 1 to power off) - * Last GPIO is 25, further bits are supposed to be 0. - * Enable mask has ones for INPUT, 0 for OUTPUT. - * Default is LED ON, board ON :) - */ - -#define ORION5X_GPIO_OUT_ENABLE 0xfef4f0ca -#define ORION5X_GPIO_OUT_VALUE 0x00000000 -#define ORION5X_GPIO_IN_POLARITY 0x000000d0 - -/* - * NS16550 Configuration - */ - -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK -#define CONFIG_SYS_NS16550_COM1 ORION5X_UART0_BASE - -/* - * Serial Port configuration - * The following definitions let you select what serial you want to use - * for your console driver. - */ - -#define CONFIG_SYS_BAUDRATE_TABLE \ - { 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600 } - -/* - * FLASH configuration - */ - -#define CONFIG_SYS_FLASH_BASE 0xfff80000 - -/* auto boot */ - -/* - * Network - */ - -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1} /* enable port 0 only */ -#define CONFIG_SKIP_LOCAL_MAC_RANDOMIZATION /* don't randomize MAC */ -#define CONFIG_PHY_BASE_ADR 0x8 -#endif - -/* - * IDE - */ -#ifdef CONFIG_IDE -#define __io -/* Data, registers and alternate blocks are at the same offset */ -/* Each 8-bit ATA register is aligned to a 4-bytes address */ -/* A single bus, a single device */ -/* ATA registers base is at SATA controller base */ -/* ATA bus 0 is orion5x port 1 on ED Mini V2 */ -/* end of IDE defines */ -#endif /* CMD_IDE */ - -/* - * Common USB/EHCI configuration - */ -#ifdef CONFIG_CMD_USB -#define ORION5X_USB20_HOST_PORT_BASE ORION5X_USB20_PORT0_BASE -#endif /* CONFIG_CMD_USB */ - -/* - * I2C related stuff - */ -#ifdef CONFIG_CMD_I2C -#define CONFIG_I2C_MVTWSI_BASE0 ORION5X_TWSI_BASE -#endif - -/* - * Environment variables configurations - */ - -/* Enable command line editing */ - -/* provide extensive help */ - -/* additions for new relocation code, must be added to all boards */ -#define CONFIG_SYS_SDRAM_BASE 0 - -#endif /* _CONFIG_EDMINIV2_H */