diff --git a/arch/arm/dts/armada-3720-db.dts b/arch/arm/dts/armada-3720-db.dts index 1b219c423b..1b1b66b94d 100644 --- a/arch/arm/dts/armada-3720-db.dts +++ b/arch/arm/dts/armada-3720-db.dts @@ -159,6 +159,6 @@ &pcie0 { pinctrl-names = "default"; pinctrl-0 = <&pcie_pins>; - reset-gpio = <&gpiosb 3 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/dts/armada-3720-espressobin.dts b/arch/arm/dts/armada-3720-espressobin.dts index 50381e979e..2ace52e812 100644 --- a/arch/arm/dts/armada-3720-espressobin.dts +++ b/arch/arm/dts/armada-3720-espressobin.dts @@ -145,6 +145,6 @@ &pcie0 { pinctrl-names = "default"; pinctrl-0 = <&pcie_pins>; - reset-gpio = <&gpiosb 3 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/dts/armada-3720-turris-mox.dts b/arch/arm/dts/armada-3720-turris-mox.dts index 0f0a6ce65d..974270cc8c 100644 --- a/arch/arm/dts/armada-3720-turris-mox.dts +++ b/arch/arm/dts/armada-3720-turris-mox.dts @@ -172,6 +172,6 @@ &pcie0 { pinctrl-names = "default"; pinctrl-0 = <&pcie_pins>; - reset-gpio = <&gpiosb 3 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; status = "disabled"; }; diff --git a/drivers/pci/pci-aardvark.c b/drivers/pci/pci-aardvark.c index 711b930d0f..5b3f23c184 100644 --- a/drivers/pci/pci-aardvark.c +++ b/drivers/pci/pci-aardvark.c @@ -616,7 +616,7 @@ static int pcie_advk_probe(struct udevice *dev) #if CONFIG_IS_ENABLED(DM_GPIO) struct gpio_desc reset_gpio; - gpio_request_by_name(dev, "reset-gpio", 0, &reset_gpio, + gpio_request_by_name(dev, "reset-gpios", 0, &reset_gpio, GPIOD_IS_OUT); /* * Issue reset to add-in card through the dedicated GPIO. @@ -633,9 +633,9 @@ static int pcie_advk_probe(struct udevice *dev) */ if (dm_gpio_is_valid(&reset_gpio)) { dev_dbg(pcie->dev, "Toggle PCIE Reset GPIO ...\n"); - dm_gpio_set_value(&reset_gpio, 0); - mdelay(200); dm_gpio_set_value(&reset_gpio, 1); + mdelay(200); + dm_gpio_set_value(&reset_gpio, 0); } #else dev_dbg(pcie->dev, "PCIE Reset on GPIO support is missing\n");