mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-01 08:59:33 +00:00
arm: imx: add i.MX6ULL 14x14 EVK board support
Add i.MX6ULL EVK board support: Add device tree file, which is copied from NXP Linux. Enabled DM_MMC, DM_GPIO, DM_I2C, DM_SPI, PINCTRL, DM_REGULATOR. The uart iomux settings are still keeped in board file. Boot Log: U-Boot 2016.09-rc1-00366-gbb419ef-dirty (Aug 11 2016 - 13:08:58 +0800) CPU: Freescale i.MX6ULL rev1.0 at 396MHz CPU: Commercial temperature grade (0C to 95C) at 15C Reset cause: POR Model: Freescale i.MX6 ULL 14x14 EVK Board Board: MX6ULL 14x14 EVK DRAM: 512 MiB MMC: initialized IMX pinctrl driver FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 0 => mmc dev 1 switch to partitions #0, OK mmc1 is current device Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
This commit is contained in:
Peng Fan
Stefano Babic
parent
35ae99467d
commit
55a42b33f2
10 changed files with 985 additions and 0 deletions
|
|
@ -137,6 +137,12 @@ config TARGET_MX6UL_14X14_EVK
|
|||
select DM_THERMAL
|
||||
select SUPPORT_SPL
|
||||
|
||||
config TARGET_MX6ULL_14X14_EVK
|
||||
bool "Support mx6ull_14x14_evk"
|
||||
select MX6ULL
|
||||
select DM
|
||||
select DM_THERMAL
|
||||
|
||||
config TARGET_NITROGEN6X
|
||||
bool "nitrogen6x"
|
||||
|
||||
|
|
@ -226,6 +232,7 @@ source "board/freescale/mx6slevk/Kconfig"
|
|||
source "board/freescale/mx6sxsabresd/Kconfig"
|
||||
source "board/freescale/mx6sxsabreauto/Kconfig"
|
||||
source "board/freescale/mx6ul_14x14_evk/Kconfig"
|
||||
source "board/freescale/mx6ullevk/Kconfig"
|
||||
source "board/phytec/pcm058/Kconfig"
|
||||
source "board/gateworks/gw_ventana/Kconfig"
|
||||
source "board/kosagi/novena/Kconfig"
|
||||
|
|
|
|||
|
|
@ -280,6 +280,8 @@ dtb-$(CONFIG_VF610) += vf500-colibri.dtb \
|
|||
vf610-twr.dtb \
|
||||
pcm052.dtb
|
||||
|
||||
dtb-$(CONFIG_MX6) += imx6ull-14x14-evk.dtb
|
||||
|
||||
dtb-$(CONFIG_SOC_KEYSTONE) += k2hk-evm.dtb \
|
||||
k2l-evm.dtb \
|
||||
k2e-evm.dtb \
|
||||
|
|
|
|||
527
arch/arm/dts/imx6ull-14x14-evk.dts
Normal file
527
arch/arm/dts/imx6ull-14x14-evk.dts
Normal file
|
|
@ -0,0 +1,527 @@
|
|||
/*
|
||||
* Copyright (C) 2016 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include "imx6ull.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Freescale i.MX6 ULL 14x14 EVK Board";
|
||||
compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull";
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart1;
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0x80000000 0x20000000>;
|
||||
};
|
||||
|
||||
backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm1 0 5000000>;
|
||||
brightness-levels = <0 4 8 16 32 64 128 255>;
|
||||
default-brightness-level = <6>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
reg_can_3v3: regulator@0 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <0>;
|
||||
regulator-name = "can-3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
reg_sd1_vmmc: regulator@1 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VSD_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
reg_gpio_dvfs: regulator-gpio {
|
||||
compatible = "regulator-gpio";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_dvfs>;
|
||||
regulator-min-microvolt = <1300000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
regulator-name = "gpio_dvfs";
|
||||
regulator-type = "voltage";
|
||||
gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
|
||||
states = <1300000 0x1 1400000 0x0>;
|
||||
};
|
||||
};
|
||||
|
||||
spi4 {
|
||||
compatible = "spi-gpio";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_spi4>;
|
||||
status = "okay";
|
||||
gpio-sck = <&gpio5 11 0>;
|
||||
gpio-mosi = <&gpio5 10 0>;
|
||||
cs-gpios = <&gpio5 7 0>;
|
||||
num-chipselects = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
gpio_spi: gpio_spi@0 {
|
||||
compatible = "fairchild,74hc595";
|
||||
gpio-controller;
|
||||
oe-gpios = <&gpio5 8 0>;
|
||||
#gpio-cells = <2>;
|
||||
reg = <0>;
|
||||
registers-number = <1>;
|
||||
registers-default = /bits/ 8 <0x57>;
|
||||
spi-max-frequency = <100000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
arm-supply = <®_arm>;
|
||||
soc-supply = <®_soc>;
|
||||
dc-supply = <®_gpio_dvfs>;
|
||||
};
|
||||
|
||||
&clks {
|
||||
assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
|
||||
assigned-clock-rates = <786432000>;
|
||||
};
|
||||
|
||||
&fec1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_enet1>;
|
||||
phy-mode = "rmii";
|
||||
phy-handle = <ðphy0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&fec2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_enet2>;
|
||||
phy-mode = "rmii";
|
||||
phy-handle = <ðphy1>;
|
||||
status = "okay";
|
||||
|
||||
mdio {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
ethphy0: ethernet-phy@2 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <2>;
|
||||
};
|
||||
|
||||
ethphy1: ethernet-phy@1 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpc {
|
||||
fsl,cpu_pupscr_sw2iso = <0x1>;
|
||||
fsl,cpu_pupscr_sw = <0x0>;
|
||||
fsl,cpu_pdnscr_iso2sw = <0x1>;
|
||||
fsl,cpu_pdnscr_iso = <0x1>;
|
||||
fsl,ldo-bypass = <0>; /* DCDC, ldo-enable */
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
clock-frequency = <100000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c1>;
|
||||
status = "okay";
|
||||
|
||||
mag3110@0e {
|
||||
compatible = "fsl,mag3110";
|
||||
reg = <0x0e>;
|
||||
position = <2>;
|
||||
};
|
||||
|
||||
fxls8471@1e {
|
||||
compatible = "fsl,fxls8471";
|
||||
reg = <0x1e>;
|
||||
position = <0>;
|
||||
interrupt-parent = <&gpio5>;
|
||||
interrupts = <0 8>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
clock_frequency = <100000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&iomuxc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_hog_1>;
|
||||
imx6ul-evk {
|
||||
pinctrl_hog_1: hoggrp-1 {
|
||||
fsl,pins = <
|
||||
MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 /* SD1 CD */
|
||||
MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT 0x17059 /* SD1 VSELECT */
|
||||
MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x17059 /* SD1 RESET */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_csi1: csi1grp {
|
||||
fsl,pins = <
|
||||
MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088
|
||||
MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088
|
||||
MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088
|
||||
MX6UL_PAD_CSI_HSYNC__CSI_HSYNC 0x1b088
|
||||
MX6UL_PAD_CSI_DATA00__CSI_DATA02 0x1b088
|
||||
MX6UL_PAD_CSI_DATA01__CSI_DATA03 0x1b088
|
||||
MX6UL_PAD_CSI_DATA02__CSI_DATA04 0x1b088
|
||||
MX6UL_PAD_CSI_DATA03__CSI_DATA05 0x1b088
|
||||
MX6UL_PAD_CSI_DATA04__CSI_DATA06 0x1b088
|
||||
MX6UL_PAD_CSI_DATA05__CSI_DATA07 0x1b088
|
||||
MX6UL_PAD_CSI_DATA06__CSI_DATA08 0x1b088
|
||||
MX6UL_PAD_CSI_DATA07__CSI_DATA09 0x1b088
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_enet1: enet1grp {
|
||||
fsl,pins = <
|
||||
MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
|
||||
MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0
|
||||
MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
|
||||
MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
|
||||
MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
|
||||
MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
|
||||
MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
|
||||
MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_enet2: enet2grp {
|
||||
fsl,pins = <
|
||||
MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0
|
||||
MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
|
||||
MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0
|
||||
MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0
|
||||
MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
|
||||
MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
|
||||
MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0
|
||||
MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
|
||||
MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
|
||||
MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_flexcan1: flexcan1grp{
|
||||
fsl,pins = <
|
||||
MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020
|
||||
MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_flexcan2: flexcan2grp{
|
||||
fsl,pins = <
|
||||
MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020
|
||||
MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c1: i2c1grp {
|
||||
fsl,pins = <
|
||||
MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
|
||||
MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c2: i2c2grp {
|
||||
fsl,pins = <
|
||||
MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
|
||||
MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_lcdif_dat: lcdifdatgrp {
|
||||
fsl,pins = <
|
||||
MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
|
||||
MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79
|
||||
MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79
|
||||
MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79
|
||||
MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79
|
||||
MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79
|
||||
MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79
|
||||
MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79
|
||||
MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79
|
||||
MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79
|
||||
MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79
|
||||
MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79
|
||||
MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79
|
||||
MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79
|
||||
MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79
|
||||
MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79
|
||||
MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79
|
||||
MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79
|
||||
MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79
|
||||
MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79
|
||||
MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79
|
||||
MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79
|
||||
MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79
|
||||
MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_lcdif_ctrl: lcdifctrlgrp {
|
||||
fsl,pins = <
|
||||
MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79
|
||||
MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79
|
||||
MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79
|
||||
MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pwm1: pwm1grp {
|
||||
fsl,pins = <
|
||||
MX6UL_PAD_GPIO1_IO08__PWM1_OUT 0x110b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_qspi: qspigrp {
|
||||
fsl,pins = <
|
||||
MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70a1
|
||||
MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a1
|
||||
MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70a1
|
||||
MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70a1
|
||||
MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70a1
|
||||
MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart1: uart1grp {
|
||||
fsl,pins = <
|
||||
MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
|
||||
MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart2: uart2grp {
|
||||
fsl,pins = <
|
||||
MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
|
||||
MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1
|
||||
MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS 0x1b0b1
|
||||
MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart2dte: uart2dtegrp {
|
||||
fsl,pins = <
|
||||
MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX 0x1b0b1
|
||||
MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX 0x1b0b1
|
||||
MX6UL_PAD_UART3_RX_DATA__UART2_DTE_CTS 0x1b0b1
|
||||
MX6UL_PAD_UART3_TX_DATA__UART2_DTE_RTS 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc1: usdhc1grp {
|
||||
fsl,pins = <
|
||||
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
|
||||
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10071
|
||||
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
|
||||
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
|
||||
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
|
||||
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc2: usdhc2grp {
|
||||
fsl,pins = <
|
||||
MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10069
|
||||
MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059
|
||||
MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
|
||||
MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
|
||||
MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
|
||||
MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_wdog: wdoggrp {
|
||||
fsl,pins = <
|
||||
MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0
|
||||
>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&iomuxc_snvs {
|
||||
pinctrl-names = "default_snvs";
|
||||
pinctrl-0 = <&pinctrl_hog_2>;
|
||||
imx6ul-evk {
|
||||
pinctrl_hog_2: hoggrp-2 {
|
||||
fsl,pins = <
|
||||
MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x80000000
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_dvfs: dvfsgrp {
|
||||
fsl,pins = <
|
||||
MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x79
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_lcdif_reset: lcdifresetgrp {
|
||||
fsl,pins = <
|
||||
/* used for lcd reset */
|
||||
MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x79
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_spi4: spi4grp {
|
||||
fsl,pins = <
|
||||
MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10 0x70a1
|
||||
MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x70a1
|
||||
MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x70a1
|
||||
MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x80000000
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_sai2_hp_det_b: sai2_hp_det_grp {
|
||||
fsl,pins = <
|
||||
MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x17059
|
||||
>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
&lcdif {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_lcdif_dat
|
||||
&pinctrl_lcdif_ctrl
|
||||
&pinctrl_lcdif_reset>;
|
||||
display = <&display0>;
|
||||
status = "okay";
|
||||
|
||||
display0: display {
|
||||
bits-per-pixel = <16>;
|
||||
bus-width = <24>;
|
||||
|
||||
display-timings {
|
||||
native-mode = <&timing0>;
|
||||
timing0: timing0 {
|
||||
clock-frequency = <9200000>;
|
||||
hactive = <480>;
|
||||
vactive = <272>;
|
||||
hfront-porch = <8>;
|
||||
hback-porch = <4>;
|
||||
hsync-len = <41>;
|
||||
vback-porch = <2>;
|
||||
vfront-porch = <4>;
|
||||
vsync-len = <10>;
|
||||
|
||||
hsync-active = <0>;
|
||||
vsync-active = <0>;
|
||||
de-active = <1>;
|
||||
pixelclk-active = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qspi {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_qspi>;
|
||||
status = "okay";
|
||||
ddrsmp=<0>;
|
||||
|
||||
flash0: n25q256a@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "micron,n25q256a";
|
||||
spi-max-frequency = <29000000>;
|
||||
spi-nor,ddr-quad-read-dummy = <6>;
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart2>;
|
||||
fsl,uart-has-rtscts;
|
||||
/* for DTE mode, add below change */
|
||||
/* fsl,dte-mode; */
|
||||
/* pinctrl-0 = <&pinctrl_uart2dte>; */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbotg1 {
|
||||
dr_mode = "otg";
|
||||
srp-disable;
|
||||
hnp-disable;
|
||||
adp-disable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbotg2 {
|
||||
dr_mode = "host";
|
||||
disable-over-current;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbphy1 {
|
||||
tx-d-cal = <0x5>;
|
||||
};
|
||||
|
||||
&usbphy2 {
|
||||
tx-d-cal = <0x5>;
|
||||
};
|
||||
|
||||
&usdhc1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usdhc1>;
|
||||
cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
|
||||
keep-power-in-suspend;
|
||||
enable-sdio-wakeup;
|
||||
vmmc-supply = <®_sd1_vmmc>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usdhc2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usdhc2>;
|
||||
no-1-8-v;
|
||||
non-removable;
|
||||
keep-power-in-suspend;
|
||||
enable-sdio-wakeup;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wdog1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_wdog>;
|
||||
fsl,wdog_b;
|
||||
};
|
||||
12
board/freescale/mx6ullevk/Kconfig
Normal file
12
board/freescale/mx6ullevk/Kconfig
Normal file
|
|
@ -0,0 +1,12 @@
|
|||
if TARGET_MX6ULL_14X14_EVK
|
||||
|
||||
config SYS_BOARD
|
||||
default "mx6ullevk"
|
||||
|
||||
config SYS_VENDOR
|
||||
default "freescale"
|
||||
|
||||
config SYS_CONFIG_NAME
|
||||
default "mx6ullevk"
|
||||
|
||||
endif
|
||||
6
board/freescale/mx6ullevk/MAINTAINERS
Normal file
6
board/freescale/mx6ullevk/MAINTAINERS
Normal file
|
|
@ -0,0 +1,6 @@
|
|||
MX6ULLEVK BOARD
|
||||
M: Peng Fan <peng.fan@nxp.com>
|
||||
S: Maintained
|
||||
F: board/freescale/mx6ullevk/
|
||||
F: include/configs/mx6ullevk.h
|
||||
F: configs/mx6ull_14x14_evk_defconfig
|
||||
6
board/freescale/mx6ullevk/Makefile
Normal file
6
board/freescale/mx6ullevk/Makefile
Normal file
|
|
@ -0,0 +1,6 @@
|
|||
# (C) Copyright 2016 Freescale Semiconductor, Inc.
|
||||
#
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
|
||||
obj-y := mx6ullevk.o
|
||||
116
board/freescale/mx6ullevk/imximage.cfg
Normal file
116
board/freescale/mx6ullevk/imximage.cfg
Normal file
|
|
@ -0,0 +1,116 @@
|
|||
/*
|
||||
* Copyright (C) 2016 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*
|
||||
* Refer docs/README.imxmage for more details about how-to configure
|
||||
* and create imximage boot image
|
||||
*
|
||||
* The syntax is taken as close as possible with the kwbimage
|
||||
*/
|
||||
|
||||
#define __ASSEMBLY__
|
||||
#include <config.h>
|
||||
|
||||
/* image version */
|
||||
|
||||
IMAGE_VERSION 2
|
||||
|
||||
/*
|
||||
* Boot Device : one of
|
||||
* spi/sd/nand/onenand, qspi/nor
|
||||
*/
|
||||
|
||||
#ifdef CONFIG_SYS_BOOT_QSPI
|
||||
BOOT_FROM qspi
|
||||
#elif defined(CONFIG_SYS_BOOT_EIMNOR)
|
||||
BOOT_FROM nor
|
||||
#else
|
||||
BOOT_FROM sd
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_USE_PLUGIN
|
||||
/*PLUGIN plugin-binary-file IRAM_FREE_START_ADDR*/
|
||||
PLUGIN board/freescale/mx6ullevk/plugin.bin 0x00907000
|
||||
#else
|
||||
|
||||
#ifdef CONFIG_SECURE_BOOT
|
||||
CSF CONFIG_CSF_SIZE
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Device Configuration Data (DCD)
|
||||
*
|
||||
* Each entry must have the format:
|
||||
* Addr-type Address Value
|
||||
*
|
||||
* where:
|
||||
* Addr-type register length (1,2 or 4 bytes)
|
||||
* Address absolute address of the register
|
||||
* value value to be stored in the register
|
||||
*/
|
||||
|
||||
/* Enable all clocks */
|
||||
DATA 4 0x020c4068 0xffffffff
|
||||
DATA 4 0x020c406c 0xffffffff
|
||||
DATA 4 0x020c4070 0xffffffff
|
||||
DATA 4 0x020c4074 0xffffffff
|
||||
DATA 4 0x020c4078 0xffffffff
|
||||
DATA 4 0x020c407c 0xffffffff
|
||||
DATA 4 0x020c4080 0xffffffff
|
||||
|
||||
DATA 4 0x020E04B4 0x000C0000
|
||||
DATA 4 0x020E04AC 0x00000000
|
||||
DATA 4 0x020E027C 0x00000030
|
||||
DATA 4 0x020E0250 0x00000030
|
||||
DATA 4 0x020E024C 0x00000030
|
||||
DATA 4 0x020E0490 0x00000030
|
||||
DATA 4 0x020E0288 0x000C0030
|
||||
DATA 4 0x020E0270 0x00000000
|
||||
DATA 4 0x020E0260 0x00000030
|
||||
DATA 4 0x020E0264 0x00000030
|
||||
DATA 4 0x020E04A0 0x00000030
|
||||
DATA 4 0x020E0494 0x00020000
|
||||
DATA 4 0x020E0280 0x00000030
|
||||
DATA 4 0x020E0284 0x00000030
|
||||
DATA 4 0x020E04B0 0x00020000
|
||||
DATA 4 0x020E0498 0x00000030
|
||||
DATA 4 0x020E04A4 0x00000030
|
||||
DATA 4 0x020E0244 0x00000030
|
||||
DATA 4 0x020E0248 0x00000030
|
||||
DATA 4 0x021B001C 0x00008000
|
||||
DATA 4 0x021B0800 0xA1390003
|
||||
DATA 4 0x021B080C 0x00000004
|
||||
DATA 4 0x021B083C 0x41640158
|
||||
DATA 4 0x021B0848 0x40403237
|
||||
DATA 4 0x021B0850 0x40403C33
|
||||
DATA 4 0x021B081C 0x33333333
|
||||
DATA 4 0x021B0820 0x33333333
|
||||
DATA 4 0x021B082C 0xf3333333
|
||||
DATA 4 0x021B0830 0xf3333333
|
||||
DATA 4 0x021B08C0 0x00944009
|
||||
DATA 4 0x021B08b8 0x00000800
|
||||
DATA 4 0x021B0004 0x0002002D
|
||||
DATA 4 0x021B0008 0x1B333030
|
||||
DATA 4 0x021B000C 0x676B52F3
|
||||
DATA 4 0x021B0010 0xB66D0B63
|
||||
DATA 4 0x021B0014 0x01FF00DB
|
||||
DATA 4 0x021B0018 0x00201740
|
||||
DATA 4 0x021B001C 0x00008000
|
||||
DATA 4 0x021B002C 0x000026D2
|
||||
DATA 4 0x021B0030 0x006B1023
|
||||
DATA 4 0x021B0040 0x0000004F
|
||||
DATA 4 0x021B0000 0x84180000
|
||||
DATA 4 0x021B0890 0x00400000
|
||||
DATA 4 0x021B001C 0x02008032
|
||||
DATA 4 0x021B001C 0x00008033
|
||||
DATA 4 0x021B001C 0x00048031
|
||||
DATA 4 0x021B001C 0x15208030
|
||||
DATA 4 0x021B001C 0x04008040
|
||||
DATA 4 0x021B0020 0x00000800
|
||||
DATA 4 0x021B0818 0x00000227
|
||||
DATA 4 0x021B0004 0x0002552D
|
||||
DATA 4 0x021B0404 0x00011006
|
||||
DATA 4 0x021B001C 0x00000000
|
||||
|
||||
#endif
|
||||
99
board/freescale/mx6ullevk/mx6ullevk.c
Normal file
99
board/freescale/mx6ullevk/mx6ullevk.c
Normal file
|
|
@ -0,0 +1,99 @@
|
|||
/*
|
||||
* Copyright (C) 2016 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#include <asm/arch/clock.h>
|
||||
#include <asm/arch/iomux.h>
|
||||
#include <asm/arch/imx-regs.h>
|
||||
#include <asm/arch/crm_regs.h>
|
||||
#include <asm/arch/mx6-pins.h>
|
||||
#include <asm/arch/sys_proto.h>
|
||||
#include <asm/gpio.h>
|
||||
#include <asm/imx-common/iomux-v3.h>
|
||||
#include <asm/imx-common/boot_mode.h>
|
||||
#include <asm/io.h>
|
||||
#include <common.h>
|
||||
#include <fsl_esdhc.h>
|
||||
#include <linux/sizes.h>
|
||||
#include <mmc.h>
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
|
||||
PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
|
||||
PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
|
||||
|
||||
int dram_init(void)
|
||||
{
|
||||
gd->ram_size = imx_ddr_size();
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static iomux_v3_cfg_t const uart1_pads[] = {
|
||||
MX6_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
|
||||
MX6_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
|
||||
};
|
||||
|
||||
static void setup_iomux_uart(void)
|
||||
{
|
||||
imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
|
||||
}
|
||||
|
||||
int board_mmc_get_env_dev(int devno)
|
||||
{
|
||||
return devno;
|
||||
}
|
||||
|
||||
int mmc_map_to_kernel_blk(int devno)
|
||||
{
|
||||
return devno;
|
||||
}
|
||||
|
||||
int board_early_init_f(void)
|
||||
{
|
||||
setup_iomux_uart();
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_init(void)
|
||||
{
|
||||
/* Address of boot parameters */
|
||||
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_CMD_BMODE
|
||||
static const struct boot_mode board_boot_modes[] = {
|
||||
/* 4 bit bus width */
|
||||
{"sd1", MAKE_CFGVAL(0x42, 0x20, 0x00, 0x00)},
|
||||
{"sd2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
|
||||
{"qspi1", MAKE_CFGVAL(0x10, 0x00, 0x00, 0x00)},
|
||||
{NULL, 0},
|
||||
};
|
||||
#endif
|
||||
|
||||
int board_late_init(void)
|
||||
{
|
||||
#ifdef CONFIG_CMD_BMODE
|
||||
add_board_boot_modes(board_boot_modes);
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
|
||||
setenv("board_name", "EVK");
|
||||
setenv("board_rev", "14X14");
|
||||
#endif
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int checkboard(void)
|
||||
{
|
||||
puts("Board: MX6ULL 14x14 EVK\n");
|
||||
|
||||
return 0;
|
||||
}
|
||||
30
configs/mx6ull_14x14_evk_defconfig
Normal file
30
configs/mx6ull_14x14_evk_defconfig
Normal file
|
|
@ -0,0 +1,30 @@
|
|||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_MX6=y
|
||||
CONFIG_TARGET_MX6ULL_14X14_EVK=y
|
||||
CONFIG_DM_GPIO=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="imx6ull-14x14-evk"
|
||||
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6ullevk/imximage.cfg"
|
||||
CONFIG_BOOTDELAY=3
|
||||
CONFIG_HUSH_PARSER=y
|
||||
CONFIG_CMD_BOOTZ=y
|
||||
# CONFIG_CMD_IMLS is not set
|
||||
CONFIG_CMD_MEMTEST=y
|
||||
CONFIG_CMD_MMC=y
|
||||
CONFIG_CMD_I2C=y
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_CMD_DHCP=y
|
||||
CONFIG_CMD_PING=y
|
||||
CONFIG_CMD_CACHE=y
|
||||
CONFIG_CMD_EXT2=y
|
||||
CONFIG_CMD_EXT4=y
|
||||
CONFIG_CMD_EXT4_WRITE=y
|
||||
CONFIG_CMD_FAT=y
|
||||
CONFIG_CMD_FS_GENERIC=y
|
||||
CONFIG_OF_CONTROL=y
|
||||
CONFIG_DM_74X164=y
|
||||
CONFIG_DM_I2C=y
|
||||
CONFIG_DM_MMC=y
|
||||
CONFIG_PINCTRL=y
|
||||
CONFIG_PINCTRL_IMX6=y
|
||||
CONFIG_DM_REGULATOR=y
|
||||
CONFIG_DM_SPI=y
|
||||
180
include/configs/mx6ullevk.h
Normal file
180
include/configs/mx6ullevk.h
Normal file
|
|
@ -0,0 +1,180 @@
|
|||
/*
|
||||
* Copyright (C) 2016 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* Configuration settings for the Freescale i.MX6UL 14x14 EVK board.
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
#ifndef __MX6ULLEVK_CONFIG_H
|
||||
#define __MX6ULLEVK_CONFIG_H
|
||||
|
||||
|
||||
#include <asm/arch/imx-regs.h>
|
||||
#include <linux/sizes.h>
|
||||
#include "mx6_common.h"
|
||||
#include <asm/imx-common/gpio.h>
|
||||
|
||||
#ifdef CONFIG_SECURE_BOOT
|
||||
#ifndef CONFIG_CSF_SIZE
|
||||
#define CONFIG_CSF_SIZE 0x4000
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#define PHYS_SDRAM_SIZE SZ_512M
|
||||
|
||||
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
|
||||
|
||||
#define CONFIG_DISPLAY_CPUINFO
|
||||
#define CONFIG_DISPLAY_BOARDINFO
|
||||
|
||||
/* Size of malloc() pool */
|
||||
#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M)
|
||||
|
||||
#define CONFIG_BOARD_EARLY_INIT_F
|
||||
#define CONFIG_BOARD_LATE_INIT
|
||||
|
||||
#define CONFIG_MXC_GPIO
|
||||
|
||||
#define CONFIG_MXC_UART
|
||||
#define CONFIG_MXC_UART_BASE UART1_BASE
|
||||
|
||||
/* MMC Configs */
|
||||
#ifdef CONFIG_FSL_USDHC
|
||||
#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
|
||||
|
||||
/* NAND pin conflicts with usdhc2 */
|
||||
#ifdef CONFIG_SYS_USE_NAND
|
||||
#define CONFIG_SYS_FSL_USDHC_NUM 1
|
||||
#else
|
||||
#define CONFIG_SYS_FSL_USDHC_NUM 2
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/* I2C configs */
|
||||
#ifdef CONFIG_CMD_I2C
|
||||
#define CONFIG_SYS_I2C_MXC
|
||||
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
|
||||
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
|
||||
#define CONFIG_SYS_I2C_SPEED 100000
|
||||
#endif
|
||||
|
||||
#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"script=boot.scr\0" \
|
||||
"image=zImage\0" \
|
||||
"console=ttymxc0\0" \
|
||||
"fdt_high=0xffffffff\0" \
|
||||
"initrd_high=0xffffffff\0" \
|
||||
"fdt_file=imx6ull-14x14-evk.dtb\0" \
|
||||
"fdt_addr=0x83000000\0" \
|
||||
"boot_fdt=try\0" \
|
||||
"ip_dyn=yes\0" \
|
||||
"videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
|
||||
"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
|
||||
"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
|
||||
"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
|
||||
"mmcautodetect=yes\0" \
|
||||
"mmcargs=setenv bootargs console=${console},${baudrate} " \
|
||||
"root=${mmcroot}\0" \
|
||||
"loadbootscript=" \
|
||||
"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
|
||||
"bootscript=echo Running bootscript from mmc ...; " \
|
||||
"source\0" \
|
||||
"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
|
||||
"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
|
||||
"mmcboot=echo Booting from mmc ...; " \
|
||||
"run mmcargs; " \
|
||||
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
|
||||
"if run loadfdt; then " \
|
||||
"bootz ${loadaddr} - ${fdt_addr}; " \
|
||||
"else " \
|
||||
"if test ${boot_fdt} = try; then " \
|
||||
"bootz; " \
|
||||
"else " \
|
||||
"echo WARN: Cannot load the DT; " \
|
||||
"fi; " \
|
||||
"fi; " \
|
||||
"else " \
|
||||
"bootz; " \
|
||||
"fi;\0" \
|
||||
"netargs=setenv bootargs console=${console},${baudrate} " \
|
||||
"root=/dev/nfs " \
|
||||
"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
|
||||
"netboot=echo Booting from net ...; " \
|
||||
"run netargs; " \
|
||||
"if test ${ip_dyn} = yes; then " \
|
||||
"setenv get_cmd dhcp; " \
|
||||
"else " \
|
||||
"setenv get_cmd tftp; " \
|
||||
"fi; " \
|
||||
"${get_cmd} ${image}; " \
|
||||
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
|
||||
"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
|
||||
"bootz ${loadaddr} - ${fdt_addr}; " \
|
||||
"else " \
|
||||
"if test ${boot_fdt} = try; then " \
|
||||
"bootz; " \
|
||||
"else " \
|
||||
"echo WARN: Cannot load the DT; " \
|
||||
"fi; " \
|
||||
"fi; " \
|
||||
"else " \
|
||||
"bootz; " \
|
||||
"fi;\0" \
|
||||
|
||||
#define CONFIG_BOOTCOMMAND \
|
||||
"mmc dev ${mmcdev};" \
|
||||
"mmc dev ${mmcdev}; if mmc rescan; then " \
|
||||
"if run loadbootscript; then " \
|
||||
"run bootscript; " \
|
||||
"else " \
|
||||
"if run loadimage; then " \
|
||||
"run mmcboot; " \
|
||||
"else run netboot; " \
|
||||
"fi; " \
|
||||
"fi; " \
|
||||
"else run netboot; fi"
|
||||
|
||||
/* Miscellaneous configurable options */
|
||||
#define CONFIG_SYS_MEMTEST_START 0x80000000
|
||||
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x8000000)
|
||||
|
||||
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
||||
#define CONFIG_SYS_HZ 1000
|
||||
|
||||
#define CONFIG_STACKSIZE SZ_128K
|
||||
|
||||
/* Physical Memory Map */
|
||||
#define CONFIG_NR_DRAM_BANKS 1
|
||||
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
|
||||
|
||||
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
|
||||
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
||||
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
||||
|
||||
#define CONFIG_SYS_INIT_SP_OFFSET \
|
||||
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
||||
#define CONFIG_SYS_INIT_SP_ADDR \
|
||||
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
||||
|
||||
/* FLASH and environment organization */
|
||||
#define CONFIG_SYS_NO_FLASH
|
||||
|
||||
#define CONFIG_SYS_MMC_ENV_DEV 1 /* USDHC2 */
|
||||
#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */
|
||||
#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
|
||||
|
||||
#define CONFIG_ENV_IS_IN_MMC
|
||||
#define CONFIG_ENV_SIZE SZ_8K
|
||||
#define CONFIG_ENV_OFFSET (12 * SZ_64K)
|
||||
|
||||
#define CONFIG_CMD_BMODE
|
||||
|
||||
#define CONFIG_IMX_THERMAL
|
||||
|
||||
#define CONFIG_IOMUX_LPSR
|
||||
|
||||
#define CONFIG_SOFT_SPI
|
||||
|
||||
#endif
|
||||
Loading…
Reference in a new issue