Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-29 08:01:08 +00:00
Code Issues Projects Releases Packages Wiki Activity

net: pcnet: Move initialize function at the end

Browse source 
Move the function at the end of the driver, so we could drop
various forward declarations later. No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
This commit is contained in:
Marek Vasut 2020-05-17 18:24:17 +02:00 committed by Daniel Schwierzeck
parent ada6a2cea5
commit 54c6067486
1 changed files with 89 additions and 91 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

180
drivers/net/pcnet.c
View file

@ -161,97 +161,6 @@ static struct pci_device_id supported[] = {
{}
};
int pcnet_initialize(bd_t *bis)
{
pci_dev_t devbusfn;
struct eth_device *dev;
u16 command, status;
int dev_nr = 0;
u32 bar;
PCNET_DEBUG1("\npcnet_initialize...\n");
for (dev_nr = 0;; dev_nr++) {
/*
* Find the PCnet PCI device(s).
*/
devbusfn = pci_find_devices(supported, dev_nr);
if (devbusfn < 0)
break;
/*
* Allocate and pre-fill the device structure.
*/
dev = calloc(1, sizeof(*dev));
if (!dev) {
printf("pcnet: Can not allocate memory\n");
break;
}
/*
* We only maintain one structure because the drivers will
* never be used concurrently. In 32bit mode the RX and TX
* ring entries must be aligned on 16-byte boundaries.
*/
if (!lp) {
lp = malloc_cache_aligned(sizeof(*lp));
lp->uc = map_physmem((phys_addr_t)&lp->ucp,
sizeof(lp->ucp), MAP_NOCACHE);
flush_dcache_range((unsigned long)lp,
(unsigned long)lp + sizeof(*lp));
}
dev->priv = (void *)(unsigned long)devbusfn;
sprintf(dev->name, "pcnet#%d", dev_nr);
/*
* Setup the PCI device.
*/
pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_1, &bar);
dev->iobase = pci_mem_to_phys(devbusfn, bar);
dev->iobase &= ~0xf;
PCNET_DEBUG1("%s: devbusfn=0x%x iobase=0x%lx: ",
dev->name, devbusfn, (unsigned long)dev->iobase);
command = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
pci_write_config_word(devbusfn, PCI_COMMAND, command);
pci_read_config_word(devbusfn, PCI_COMMAND, &status);
if ((status & command) != command) {
printf("%s: Couldn't enable IO access or Bus Mastering\n",
dev->name);
free(dev);
continue;
}
pci_write_config_byte(devbusfn, PCI_LATENCY_TIMER, 0x40);
/*
* Probe the PCnet chip.
*/
if (pcnet_probe(dev, bis, dev_nr) < 0) {
free(dev);
continue;
}
/*
* Setup device structure and register the driver.
*/
dev->init = pcnet_init;
dev->halt = pcnet_halt;
dev->send = pcnet_send;
dev->recv = pcnet_recv;
eth_register(dev);
}
udelay(10 * 1000);
return dev_nr;
}
static int pcnet_probe(struct eth_device *dev, bd_t *bis, int dev_nr)
{
int chip_version;
@ -548,3 +457,92 @@ static void pcnet_halt(struct eth_device *dev)
if (i <= 0)
printf("%s: TIMEOUT: controller reset failed\n", dev->name);
}
int pcnet_initialize(bd_t *bis)
{
pci_dev_t devbusfn;
struct eth_device *dev;
u16 command, status;
int dev_nr = 0;
u32 bar;
PCNET_DEBUG1("\npcnet_initialize...\n");
for (dev_nr = 0; ; dev_nr++) {
/*
* Find the PCnet PCI device(s).
*/
devbusfn = pci_find_devices(supported, dev_nr);
if (devbusfn < 0)
break;
/*
* Allocate and pre-fill the device structure.
*/
dev = calloc(1, sizeof(*dev));
if (!dev) {
printf("pcnet: Can not allocate memory\n");
break;
}
/*
* We only maintain one structure because the drivers will
* never be used concurrently. In 32bit mode the RX and TX
* ring entries must be aligned on 16-byte boundaries.
*/
if (!lp) {
lp = malloc_cache_aligned(sizeof(*lp));
lp->uc = map_physmem((phys_addr_t)&lp->ucp,
sizeof(lp->ucp), MAP_NOCACHE);
flush_dcache_range((unsigned long)lp,
(unsigned long)lp + sizeof(*lp));
}
dev->priv = (void *)(unsigned long)devbusfn;
sprintf(dev->name, "pcnet#%d", dev_nr);
/*
* Setup the PCI device.
*/
pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_1, &bar);
dev->iobase = pci_mem_to_phys(devbusfn, bar);
dev->iobase &= ~0xf;
PCNET_DEBUG1("%s: devbusfn=0x%x iobase=0x%lx: ",
dev->name, devbusfn, (unsigned long)dev->iobase);
command = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
pci_write_config_word(devbusfn, PCI_COMMAND, command);
pci_read_config_word(devbusfn, PCI_COMMAND, &status);
if ((status & command) != command) {
printf("%s: Couldn't enable IO access or Bus Mastering\n",
dev->name);
free(dev);
continue;
}
pci_write_config_byte(devbusfn, PCI_LATENCY_TIMER, 0x40);
/*
* Probe the PCnet chip.
*/
if (pcnet_probe(dev, bis, dev_nr) < 0) {
free(dev);
continue;
}
/*
* Setup device structure and register the driver.
*/
dev->init = pcnet_init;
dev->halt = pcnet_halt;
dev->send = pcnet_send;
dev->recv = pcnet_recv;
eth_register(dev);
}
udelay(10 * 1000);
return dev_nr;
}