cpci750: i2c cleanup

The following changes were made, primarily to bring the cpci750 i2c
driver in line with U-Boot's current I2C API:
- Made i2c_init() globally accessible
- Made i2c_read() and i2c_write() return an integer
- Updated i2c_init() calls to pass in CONFIG_SYS_I2C_SLAVE in the
  offhand chance someone adds slave support in the future

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
This commit is contained in:
Peter Tyser 2009-04-24 15:34:06 -05:00 committed by Wolfgang Denk
parent 9c90a2c8e8
commit 54afc6ee10

View file

@ -27,6 +27,7 @@
#include <common.h>
#include <mpc8xx.h>
#include <malloc.h>
#include <i2c.h>
#include "../../Marvell/include/mv_gen_reg.h"
#include "../../Marvell/include/core.h"
@ -41,7 +42,7 @@
/* Assuming that there is only one master on the bus (us) */
static void i2c_init (int speed, int slaveaddr)
void i2c_init (int speed, int slaveaddr)
{
unsigned int n, m, freq, margin, power;
unsigned int actualN = 0, actualM = 0;
@ -375,7 +376,7 @@ i2c_set_dev_offset (uchar dev_addr, unsigned int offset, int ten_bit,
return 0; /* sucessful completion */
}
uchar
int
i2c_read (uchar dev_addr, unsigned int offset, int alen, uchar * data,
int len)
{
@ -384,7 +385,8 @@ i2c_read (uchar dev_addr, unsigned int offset, int alen, uchar * data,
DP (puts ("i2c_read\n"));
i2c_init (i2cFreq, 0); /* set the i2c frequency */
/* set the i2c frequency */
i2c_init (i2cFreq, CONFIG_SYS_I2C_SLAVE);
status = i2c_set_dev_offset (dev_addr, offset, 0, alen); /* send the slave address + offset */
if (status) {
@ -423,7 +425,7 @@ void i2c_stop (void)
}
uchar
int
i2c_write (uchar dev_addr, unsigned int offset, int alen, uchar * data,
int len)
{
@ -432,7 +434,8 @@ i2c_write (uchar dev_addr, unsigned int offset, int alen, uchar * data,
DP (puts ("i2c_write\n"));
i2c_init (i2cFreq, 0); /* set the i2c frequency */
/* set the i2c frequency */
i2c_init (i2cFreq, CONFIG_SYS_I2C_SLAVE);
status = i2c_set_dev_offset (dev_addr, offset, 0, alen); /* send the slave address + offset */
if (status) {
@ -468,7 +471,8 @@ int i2c_probe (uchar chip)
DP (puts ("i2c_probe\n"));
i2c_init (i2cFreq, 0); /* set the i2c frequency */
/* set the i2c frequency */
i2c_init (i2cFreq, CONFIG_SYS_I2C_SLAVE);
status = i2c_set_dev_offset (chip, 0, 0, 0); /* send the slave address + no offset */
if (status) {