mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-10 15:14:43 +00:00
- CFG_RX_ETH_BUFFER added.
This commit is contained in:
stroese
parent
c602883592
commit
53cf9435cc
16 changed files with 54 additions and 36 deletions
10
README
10
README
|
|
@ -690,7 +690,7 @@ The following options need to be configured:
|
|||
- NETWORK Support (PCI):
|
||||
CONFIG_E1000
|
||||
Support for Intel 8254x gigabit chips.
|
||||
|
||||
|
||||
CONFIG_EEPRO100
|
||||
Support for Intel 82557/82559/82559ER chips.
|
||||
Optional CONFIG_EEPRO100_SROM_WRITE enables eeprom
|
||||
|
|
@ -1442,6 +1442,14 @@ Configuration Settings:
|
|||
Define if the flash driver uses extra elements in the
|
||||
common flash structure for storing flash geometry
|
||||
|
||||
- CFG_RX_ETH_BUFFER:
|
||||
Defines the number of ethernet receive buffers. On some
|
||||
ethernet controllers it is recommended to set this value
|
||||
to 8 or even higher (EEPRO100 or 405 EMAC), since all
|
||||
buffers can be full shortly after enabling the interface
|
||||
on high ethernet traffic.
|
||||
Defaults to 4 if not defined.
|
||||
|
||||
The following definitions that deal with the placement and management
|
||||
of environment data (variable area); in general, we support the
|
||||
following configurations:
|
||||
|
|
|
|||
|
|
@ -125,6 +125,10 @@
|
|||
|
||||
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
|
||||
|
||||
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
|
||||
|
||||
#define CFG_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* NAND-FLASH stuff
|
||||
*-----------------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -144,7 +144,7 @@
|
|||
/*
|
||||
* NS16550 Configuration
|
||||
*/
|
||||
#define CFG_NS16550
|
||||
#define CFG_NS16550
|
||||
#define CFG_NS16550_SERIAL
|
||||
|
||||
#define CFG_NS16550_REG_SIZE 1
|
||||
|
|
@ -171,7 +171,7 @@
|
|||
* Memory configuration using SPD information stored on the SODIMMs
|
||||
* not yet supported.
|
||||
*/
|
||||
|
||||
|
||||
#define CFG_SDRAM_SIZE 64 /* SDRAM size -- 64 or 128 MB supported */
|
||||
|
||||
/* Bit-field values for MCCR1.
|
||||
|
|
@ -186,7 +186,7 @@
|
|||
#else
|
||||
# error "SDRAM size not supported"
|
||||
#endif
|
||||
#define CFG_BANK1_ROW 0
|
||||
#define CFG_BANK1_ROW 0
|
||||
#define CFG_BANK2_ROW 0
|
||||
#define CFG_BANK3_ROW 0
|
||||
#define CFG_BANK4_ROW 0
|
||||
|
|
@ -361,7 +361,7 @@
|
|||
/* IRQ_ENA_2 bit definitions */
|
||||
#define I_ENA_2_IEAB 0x80 /* ABORT IRQ enable */
|
||||
#define I_ENA_2_IEK1 0x40 /* KEY1 IRQ enable */
|
||||
#define I_ENA_2_IEK2 0x20 /* KEY2 IRQ enable */
|
||||
#define I_ENA_2_IEK2 0x20 /* KEY2 IRQ enable */
|
||||
#define I_ENA_2_IERT 0x10 /* RTC IRQ enable */
|
||||
#define I_ENA_2_IESM 0x08 /* LM81 IRQ enable */
|
||||
#define I_ENA_2_IEDG 0x04 /* DEGENERATING IRQ enable */
|
||||
|
|
@ -371,9 +371,9 @@
|
|||
/* IRQ_STAT_2 bit definitions */
|
||||
#define I_STAT_2_ABO 0x80 /* ABORT IRQ status */
|
||||
#define I_STAT_2_KY1 0x40 /* KEY1 IRQ status */
|
||||
#define I_STAT_2_KY2 0x20 /* KEY2 IRQ status */
|
||||
#define I_STAT_2_KY2 0x20 /* KEY2 IRQ status */
|
||||
#define I_STAT_2_RTC 0x10 /* RTC IRQ status */
|
||||
#define I_STAT_2_SMN 0x08 /* LM81 IRQ status */
|
||||
#define I_STAT_2_SMN 0x08 /* LM81 IRQ status */
|
||||
#define I_STAT_2_DEG 0x04 /* DEGENERATING IRQ status */
|
||||
#define I_STAT_2_SIO2 0x02 /* ST16552/B IRQ status */
|
||||
#define I_STAT_2_SIO1 0x01 /* ST16552/A IRQ status */
|
||||
|
|
@ -421,14 +421,14 @@
|
|||
#define DISP_UDC_ADR *((volatile uchar*)(DISPLAY_BASE + 0x00)) /* UDC Address Reg. */
|
||||
#define DISP_CWORD *((volatile uchar*)(DISPLAY_BASE + 0x10)) /* Control Word Reg. */
|
||||
|
||||
#define DISP_DIG0 *((volatile uchar*)(DISP_CHR_RAM + 0x00)) /* Digit 0 address */
|
||||
#define DISP_DIG1 *((volatile uchar*)(DISP_CHR_RAM + 0x01)) /* Digit 0 address */
|
||||
#define DISP_DIG0 *((volatile uchar*)(DISP_CHR_RAM + 0x00)) /* Digit 0 address */
|
||||
#define DISP_DIG1 *((volatile uchar*)(DISP_CHR_RAM + 0x01)) /* Digit 0 address */
|
||||
#define DISP_DIG2 *((volatile uchar*)(DISP_CHR_RAM + 0x02)) /* Digit 0 address */
|
||||
#define DISP_DIG3 *((volatile uchar*)(DISP_CHR_RAM + 0x03)) /* Digit 0 address */
|
||||
#define DISP_DIG4 *((volatile uchar*)(DISP_CHR_RAM + 0x04)) /* Digit 0 address */
|
||||
#define DISP_DIG3 *((volatile uchar*)(DISP_CHR_RAM + 0x03)) /* Digit 0 address */
|
||||
#define DISP_DIG4 *((volatile uchar*)(DISP_CHR_RAM + 0x04)) /* Digit 0 address */
|
||||
#define DISP_DIG5 *((volatile uchar*)(DISP_CHR_RAM + 0x05)) /* Digit 0 address */
|
||||
#define DISP_DIG6 *((volatile uchar*)(DISP_CHR_RAM + 0x06)) /* Digit 0 address */
|
||||
#define DISP_DIG7 *((volatile uchar*)(DISP_CHR_RAM + 0x07)) /* Digit 0 address */
|
||||
#define DISP_DIG6 *((volatile uchar*)(DISP_CHR_RAM + 0x06)) /* Digit 0 address */
|
||||
#define DISP_DIG7 *((volatile uchar*)(DISP_CHR_RAM + 0x07)) /* Digit 0 address */
|
||||
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
|
|
@ -441,6 +441,7 @@
|
|||
#define CONFIG_NET_MULTI /* Multi ethernet cards support */
|
||||
|
||||
#define CONFIG_EEPRO100
|
||||
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
|
||||
|
||||
#define PCI_ENET0_IOADDR 0x00104000
|
||||
#define PCI_ENET0_MEMADDR 0x82000000
|
||||
|
|
|
|||
|
|
@ -146,6 +146,8 @@
|
|||
|
||||
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
|
||||
|
||||
#define CFG_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* PCI stuff
|
||||
*-----------------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -55,15 +55,7 @@
|
|||
#endif
|
||||
|
||||
#undef CONFIG_BOOTARGS
|
||||
#define CONFIG_RAMBOOTCOMMAND \
|
||||
"setenv bootargs root=/dev/ram rw nfsroot=$(serverip):$(rootpath) " \
|
||||
"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \
|
||||
"bootm ffc00000 ffca0000"
|
||||
#define CONFIG_NFSBOOTCOMMAND \
|
||||
"setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
|
||||
"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \
|
||||
"bootm ffc00000"
|
||||
#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
|
||||
#define CONFIG_BOOTCOMMAND "bootm 100000" /* default boot command */
|
||||
|
||||
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
||||
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
||||
|
|
@ -73,12 +65,7 @@
|
|||
|
||||
#define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */
|
||||
|
||||
#if 0 /* test-only */
|
||||
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
|
||||
CONFIG_BOOTP_VENDOREX)
|
||||
#else
|
||||
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT)
|
||||
#endif
|
||||
|
||||
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
|
||||
CFG_CMD_DHCP | \
|
||||
|
|
@ -147,6 +134,8 @@
|
|||
|
||||
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
|
||||
|
||||
#define CFG_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* PCI stuff
|
||||
*-----------------------------------------------------------------------
|
||||
|
|
@ -202,7 +191,7 @@
|
|||
#define CFG_FLASH_BASE 0xFFFC0000
|
||||
#define CFG_MONITOR_BASE CFG_FLASH_BASE
|
||||
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
|
||||
#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
|
||||
#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */
|
||||
|
||||
/*
|
||||
* For booting Linux, the board info and command line data
|
||||
|
|
@ -360,7 +349,7 @@
|
|||
#define CFG_FPGA_STATUS_TS_IRQ 0x1000
|
||||
|
||||
#define CFG_FPGA_SPARTAN2 1 /* using Xilinx Spartan 2 now */
|
||||
#define CFG_FPGA_MAX_SIZE 64*1024 /* 64kByte is enough for XC2S15 */
|
||||
#define CFG_FPGA_MAX_SIZE 128*1024 /* 128kByte is enough for XC2S30 */
|
||||
|
||||
/* FPGA program pin configuration */
|
||||
#define CFG_FPGA_PRG 0x04000000 /* FPGA program pin (ppc output) */
|
||||
|
|
|
|||
|
|
@ -304,6 +304,7 @@
|
|||
#define CFG_ETH_IOBASE 0x00104000
|
||||
|
||||
#define CONFIG_EEPRO100
|
||||
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
|
||||
#define PCI_ENET0_IOADDR 0x00104000
|
||||
#define PCI_ENET0_MEMADDR 0x80000000
|
||||
#endif /* __CONFIG_H */
|
||||
|
|
|
|||
|
|
@ -333,6 +333,7 @@
|
|||
|
||||
#define CONFIG_NET_MULTI /* Multi ethernet cards support */
|
||||
#define CONFIG_EEPRO100
|
||||
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
|
||||
#define CONFIG_EEPRO100_SROM_WRITE
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
|
|
|
|||
|
|
@ -94,6 +94,7 @@
|
|||
#define CONFIG_NET_MULTI /* Multi ethernet cards support */
|
||||
|
||||
#define CONFIG_EEPRO100 /* Ethernet Express PRO 100 */
|
||||
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
|
||||
|
||||
#define PCI_ENET0_IOADDR 0x80000000
|
||||
#define PCI_ENET0_MEMADDR 0x80000000
|
||||
|
|
|
|||
|
|
@ -261,6 +261,7 @@
|
|||
#define CONFIG_NET_MULTI /* Multi ethernet cards support */
|
||||
|
||||
#define CONFIG_EEPRO100
|
||||
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
|
||||
#define CONFIG_TULIP
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
|
|
|
|||
|
|
@ -263,6 +263,7 @@
|
|||
#define CONFIG_NET_MULTI /* Multi ethernet cards support */
|
||||
|
||||
#define CONFIG_EEPRO100
|
||||
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
|
||||
#define CONFIG_TULIP
|
||||
|
||||
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#ifdef CONFIG_PCI
|
||||
#define CONFIG_PCI_PNP
|
||||
#define CONFIG_EEPRO100
|
||||
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
|
||||
#endif
|
||||
|
||||
/*
|
||||
|
|
|
|||
|
|
@ -128,6 +128,10 @@
|
|||
|
||||
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
|
||||
|
||||
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
|
||||
|
||||
#define CFG_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* PCI stuff
|
||||
*-----------------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -82,6 +82,7 @@
|
|||
#define CONFIG_NET_MULTI /* Multi ethernet cards support */
|
||||
|
||||
#define CONFIG_EEPRO100
|
||||
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
|
||||
|
||||
#define PCI_ENET0_IOADDR 0x80000000
|
||||
#define PCI_ENET0_MEMADDR 0x80000000
|
||||
|
|
|
|||
|
|
@ -81,6 +81,7 @@
|
|||
#define CONFIG_NET_MULTI /* Multi ethernet cards support */
|
||||
|
||||
#define CONFIG_EEPRO100
|
||||
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
|
||||
#define CONFIG_NATSEMI
|
||||
#define CONFIG_NS8382X
|
||||
|
||||
|
|
|
|||
|
|
@ -36,7 +36,7 @@
|
|||
#define CONFIG_X86 1 /* This is a X86 CPU */
|
||||
#define CONFIG_SC520 1 /* Include support for AMD SC520 */
|
||||
|
||||
#define CFG_SDRAM_PRECHARGE_DELAY 6 /* 6T */
|
||||
#define CFG_SDRAM_PRECHARGE_DELAY 6 /* 6T */
|
||||
#define CFG_SDRAM_REFRESH_RATE 78 /* 7.8uS (choices are 7.8, 15.6, 31.2 or 62.5uS) */
|
||||
#define CFG_SDRAM_RAS_CAS_DELAY 3 /* 3T */
|
||||
|
||||
|
|
@ -71,7 +71,7 @@
|
|||
|
||||
#define CONFIG_BOOTDELAY 15
|
||||
#define CONFIG_BOOTARGS "root=/dev/mtdblock1 console=ttyS0,9600 mtdparts=phys:7936k(root),256k(uboot) "
|
||||
#define CONFIG_BOOTCOMMAND "setenv bootargs root=/dev/nfs ip=autoconf console=ttyS0,9600 mtdparts=phys:7808k(root),128k(env),256k(uboot); bootp; bootm"
|
||||
#define CONFIG_BOOTCOMMAND "setenv bootargs root=/dev/nfs ip=autoconf console=ttyS0,9600 mtdparts=phys:7808k(root),128k(env),256k(uboot); bootp; bootm"
|
||||
|
||||
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||||
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
|
||||
|
|
@ -123,7 +123,7 @@
|
|||
#define CONFIG_SPI_EEPROM /* SPI EEPROMs such as AT25010 or AT25640 */
|
||||
#define CONFIG_MW_EEPROM /* MicroWire EEPROMS such as AT93LC46 */
|
||||
#define CONFIG_DS1722 /* Dallas DS1722 SPI Temperature probe */
|
||||
|
||||
|
||||
|
||||
/* allow to overwrite serial and ethaddr */
|
||||
#define CONFIG_ENV_OVERWRITE
|
||||
|
|
@ -131,7 +131,7 @@
|
|||
|
||||
#if 0
|
||||
/* Environment in flash */
|
||||
#define CFG_ENV_IS_IN_FLASH 1
|
||||
#define CFG_ENV_IS_IN_FLASH 1
|
||||
# define CFG_ENV_ADDR (0x387a0000) /* Addr of Environment Sector */
|
||||
# define CFG_ENV_SIZE 0x20000 /* Total Size of Environment Sector (or 0x10000) */
|
||||
# define CFG_ENV_OFFSET 0
|
||||
|
|
@ -143,7 +143,7 @@
|
|||
# define CONFIG_SPI
|
||||
# define CONFIG_SPI_X 1
|
||||
# define CFG_ENV_SIZE 0x2000 /* Total Size of Environment EEPROM */
|
||||
# define CFG_ENV_OFFSET 0x1c00
|
||||
# define CFG_ENV_OFFSET 0x1c00
|
||||
|
||||
#endif
|
||||
|
||||
|
|
@ -155,6 +155,7 @@
|
|||
*/
|
||||
#define CONFIG_NET_MULTI /* Multi ethernet cards support */
|
||||
#define CONFIG_EEPRO100
|
||||
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
|
||||
|
||||
/************************************************************
|
||||
* IDE/ATA stuff
|
||||
|
|
@ -204,8 +205,8 @@
|
|||
#define CONFIG_PCI_SCAN_SHOW
|
||||
|
||||
#define CFG_FIRST_PCI_IRQ 9
|
||||
#define CFG_SECOND_PCI_IRQ 10
|
||||
#define CFG_THIRD_PCI_IRQ 11
|
||||
#define CFG_SECOND_PCI_IRQ 10
|
||||
#define CFG_THIRD_PCI_IRQ 11
|
||||
#define CFG_FORTH_PCI_IRQ 12
|
||||
|
||||
|
||||
|
|
|
|||
|
|
@ -125,6 +125,7 @@ protect on $(u-boot_startaddr) $(u-boot_endaddr)"
|
|||
#define CONFIG_PCI_SCAN_SHOW
|
||||
#define CONFIG_NET_MULTI
|
||||
#define CONFIG_EEPRO100
|
||||
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
|
||||
#define CONFIG_EEPRO100_SROM_WRITE
|
||||
|
||||
#define PCI_ENET0_IOADDR 0xF0000000
|
||||
|
|
|
|||
Loading…
Reference in a new issue