diff --git a/arch/arm/mach-imx/mxs/Kconfig b/arch/arm/mach-imx/mxs/Kconfig index bcd8400af9..57e69927a8 100644 --- a/arch/arm/mach-imx/mxs/Kconfig +++ b/arch/arm/mach-imx/mxs/Kconfig @@ -30,7 +30,6 @@ config SYS_SOC source "board/olimex/mx23_olinuxino/Kconfig" source "board/freescale/mx23evk/Kconfig" source "board/sandisk/sansa_fuze_plus/Kconfig" -source "board/creative/xfi3/Kconfig" endif diff --git a/board/creative/xfi3/Kconfig b/board/creative/xfi3/Kconfig deleted file mode 100644 index 7b681cd81b..0000000000 --- a/board/creative/xfi3/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_XFI3 - -config SYS_BOARD - default "xfi3" - -config SYS_VENDOR - default "creative" - -config SYS_SOC - default "mxs" - -config SYS_CONFIG_NAME - default "xfi3" - -endif diff --git a/board/creative/xfi3/MAINTAINERS b/board/creative/xfi3/MAINTAINERS deleted file mode 100644 index fb8235a329..0000000000 --- a/board/creative/xfi3/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -XFI3 BOARD -M: Marek Vasut -S: Maintained -F: board/creative/xfi3/ -F: include/configs/xfi3.h -F: configs/xfi3_defconfig diff --git a/board/creative/xfi3/Makefile b/board/creative/xfi3/Makefile deleted file mode 100644 index 67d68dd621..0000000000 --- a/board/creative/xfi3/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. - -ifndef CONFIG_SPL_BUILD -obj-y := xfi3.o -else -obj-y := spl_boot.o -endif diff --git a/board/creative/xfi3/spl_boot.c b/board/creative/xfi3/spl_boot.c deleted file mode 100644 index 67c1e9801b..0000000000 --- a/board/creative/xfi3/spl_boot.c +++ /dev/null @@ -1,133 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Creative ZEN X-Fi3 setup - * - * Copyright (C) 2013 Marek Vasut - */ - -#include -#include -#include -#include -#include -#include - -#define MUX_CONFIG_EMI (MXS_PAD_1V8 | MXS_PAD_12MA | MXS_PAD_PULLUP) -#define MUX_CONFIG_SSP (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP) -#define MUX_CONFIG_LCD (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL) - -const iomux_cfg_t iomux_setup[] = { - /* EMI */ - MX23_PAD_EMI_D00__EMI_D00 | MUX_CONFIG_EMI, - MX23_PAD_EMI_D01__EMI_D01 | MUX_CONFIG_EMI, - MX23_PAD_EMI_D02__EMI_D02 | MUX_CONFIG_EMI, - MX23_PAD_EMI_D03__EMI_D03 | MUX_CONFIG_EMI, - MX23_PAD_EMI_D04__EMI_D04 | MUX_CONFIG_EMI, - MX23_PAD_EMI_D05__EMI_D05 | MUX_CONFIG_EMI, - MX23_PAD_EMI_D06__EMI_D06 | MUX_CONFIG_EMI, - MX23_PAD_EMI_D07__EMI_D07 | MUX_CONFIG_EMI, - MX23_PAD_EMI_D08__EMI_D08 | MUX_CONFIG_EMI, - MX23_PAD_EMI_D09__EMI_D09 | MUX_CONFIG_EMI, - MX23_PAD_EMI_D10__EMI_D10 | MUX_CONFIG_EMI, - MX23_PAD_EMI_D11__EMI_D11 | MUX_CONFIG_EMI, - MX23_PAD_EMI_D12__EMI_D12 | MUX_CONFIG_EMI, - MX23_PAD_EMI_D13__EMI_D13 | MUX_CONFIG_EMI, - MX23_PAD_EMI_D14__EMI_D14 | MUX_CONFIG_EMI, - MX23_PAD_EMI_D15__EMI_D15 | MUX_CONFIG_EMI, - MX23_PAD_EMI_DQM0__EMI_DQM0 | MUX_CONFIG_EMI, - MX23_PAD_EMI_DQM1__EMI_DQM1 | MUX_CONFIG_EMI, - MX23_PAD_EMI_DQS0__EMI_DQS0 | MUX_CONFIG_EMI, - MX23_PAD_EMI_DQS1__EMI_DQS1 | MUX_CONFIG_EMI, - MX23_PAD_EMI_CLK__EMI_CLK | MUX_CONFIG_EMI, - MX23_PAD_EMI_CLKN__EMI_CLKN | MUX_CONFIG_EMI, - - MX23_PAD_EMI_A00__EMI_A00 | MUX_CONFIG_EMI, - MX23_PAD_EMI_A01__EMI_A01 | MUX_CONFIG_EMI, - MX23_PAD_EMI_A02__EMI_A02 | MUX_CONFIG_EMI, - MX23_PAD_EMI_A03__EMI_A03 | MUX_CONFIG_EMI, - MX23_PAD_EMI_A04__EMI_A04 | MUX_CONFIG_EMI, - MX23_PAD_EMI_A05__EMI_A05 | MUX_CONFIG_EMI, - MX23_PAD_EMI_A06__EMI_A06 | MUX_CONFIG_EMI, - MX23_PAD_EMI_A07__EMI_A07 | MUX_CONFIG_EMI, - MX23_PAD_EMI_A08__EMI_A08 | MUX_CONFIG_EMI, - MX23_PAD_EMI_A09__EMI_A09 | MUX_CONFIG_EMI, - MX23_PAD_EMI_A10__EMI_A10 | MUX_CONFIG_EMI, - MX23_PAD_EMI_A11__EMI_A11 | MUX_CONFIG_EMI, - MX23_PAD_EMI_A12__EMI_A12 | MUX_CONFIG_EMI, - MX23_PAD_EMI_BA0__EMI_BA0 | MUX_CONFIG_EMI, - MX23_PAD_EMI_BA1__EMI_BA1 | MUX_CONFIG_EMI, - - MX23_PAD_EMI_CASN__EMI_CASN | MUX_CONFIG_EMI, - MX23_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI, - MX23_PAD_EMI_CE1N__EMI_CE1N | MUX_CONFIG_EMI, - MX23_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI, - MX23_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI, - MX23_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI, - - MX23_PAD_LCD_D00__LCD_D00 | MUX_CONFIG_LCD, - MX23_PAD_LCD_D01__LCD_D01 | MUX_CONFIG_LCD, - MX23_PAD_LCD_D02__LCD_D02 | MUX_CONFIG_LCD, - MX23_PAD_LCD_D03__LCD_D03 | MUX_CONFIG_LCD, - MX23_PAD_LCD_D04__LCD_D04 | MUX_CONFIG_LCD, - MX23_PAD_LCD_D05__LCD_D05 | MUX_CONFIG_LCD, - MX23_PAD_LCD_D06__LCD_D06 | MUX_CONFIG_LCD, - MX23_PAD_LCD_D07__LCD_D07 | MUX_CONFIG_LCD, - MX23_PAD_LCD_D08__LCD_D08 | MUX_CONFIG_LCD, - MX23_PAD_LCD_D09__LCD_D09 | MUX_CONFIG_LCD, - MX23_PAD_LCD_D10__LCD_D10 | MUX_CONFIG_LCD, - MX23_PAD_LCD_D11__LCD_D11 | MUX_CONFIG_LCD, - MX23_PAD_LCD_D12__LCD_D12 | MUX_CONFIG_LCD, - MX23_PAD_LCD_D13__LCD_D13 | MUX_CONFIG_LCD, - MX23_PAD_LCD_D14__LCD_D14 | MUX_CONFIG_LCD, - MX23_PAD_LCD_D15__LCD_D15 | MUX_CONFIG_LCD, - MX23_PAD_LCD_D16__LCD_D16 | MUX_CONFIG_LCD, - MX23_PAD_LCD_D17__LCD_D17 | MUX_CONFIG_LCD, - MX23_PAD_LCD_RESET__LCD_RESET | MUX_CONFIG_LCD, - MX23_PAD_LCD_RS__LCD_RS | MUX_CONFIG_LCD, - MX23_PAD_LCD_WR__LCD_WR | MUX_CONFIG_LCD, - MX23_PAD_LCD_CS__LCD_CS | MUX_CONFIG_LCD, - MX23_PAD_LCD_ENABLE__LCD_ENABLE | MUX_CONFIG_LCD, - MX23_PAD_LCD_VSYNC__LCD_VSYNC | MUX_CONFIG_LCD, - - MX23_PAD_SSP1_CMD__SSP1_CMD | MUX_CONFIG_SSP, - MX23_PAD_SSP1_DETECT__GPIO_2_1 | MUX_CONFIG_SSP, - MX23_PAD_SSP1_DATA0__SSP1_DATA0 | MUX_CONFIG_SSP, - MX23_PAD_SSP1_DATA1__SSP1_DATA1 | MUX_CONFIG_SSP, - MX23_PAD_SSP1_DATA2__SSP1_DATA2 | MUX_CONFIG_SSP, - MX23_PAD_SSP1_DATA3__SSP1_DATA3 | MUX_CONFIG_SSP, - MX23_PAD_SSP1_SCK__SSP1_SCK | MUX_CONFIG_SSP, - MX23_PAD_GPMI_D07__GPIO_0_7 | MUX_CONFIG_SSP, - - MX23_PAD_GPMI_D00__SSP2_DATA0 | MUX_CONFIG_SSP, - MX23_PAD_GPMI_D01__SSP2_DATA1 | MUX_CONFIG_SSP, - MX23_PAD_GPMI_D02__SSP2_DATA2 | MUX_CONFIG_SSP, - MX23_PAD_GPMI_D03__SSP2_DATA3 | MUX_CONFIG_SSP, - MX23_PAD_GPMI_RDY1__SSP2_CMD | MUX_CONFIG_SSP, - MX23_PAD_GPMI_WRN__SSP2_SCK | MUX_CONFIG_SSP, - - /* PWM -- FIXME */ - MX23_PAD_PWM2__GPIO_1_28 | MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_PULLUP, -}; - -void mxs_adjust_memory_params(uint32_t *dram_vals) -{ - /* mDDR configuration values */ - const uint32_t regs[] = { - 0x01010001, 0x00010000, 0x01000000, 0x00000001, - 0x00010101, 0x00000001, 0x00010000, 0x01000001, - 0x01010000, 0x00000001, 0x07000200, 0x04070203, - 0x02020002, 0x06070a02, 0x0d000201, 0x0305000d, - 0x02080800, 0x19330f0a, 0x1f1f1c00, 0x020a1313, - 0x03061323, 0x0000000a, 0x00080008, 0x00200020, - 0x00200020, 0x00200020, 0x000003f7, 0x00000000, - 0x00000000, 0x00000000, 0x00000020, 0x00000000, - 0x001023cd, 0x20410010, 0x00006665, 0x00000000, - 0x00000101, 0x00000001, 0x00000000, 0x00000000, - }; - memcpy(dram_vals, regs, sizeof(regs)); -} - -void board_init_ll(const uint32_t arg, const uint32_t *resptr) -{ - mxs_common_spl_init(arg, resptr, iomux_setup, ARRAY_SIZE(iomux_setup)); -} diff --git a/board/creative/xfi3/xfi3.c b/board/creative/xfi3/xfi3.c deleted file mode 100644 index 2aa2435e49..0000000000 --- a/board/creative/xfi3/xfi3.c +++ /dev/null @@ -1,227 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Creative ZEN X-Fi3 board - * - * Copyright (C) 2013 Marek Vasut - * - * Hardware investigation done by: - * - * Amaury Pouly - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Functions - */ -int board_early_init_f(void) -{ - /* IO0 clock at 480MHz */ - mxs_set_ioclk(MXC_IOCLK0, 480000); - - /* SSP0 clock at 96MHz */ - mxs_set_sspclk(MXC_SSPCLK0, 96000, 0); - - return 0; -} - -int dram_init(void) -{ - return mxs_dram_init(); -} - -#ifdef CONFIG_CMD_MMC -static int xfi3_mmc_cd(int id) -{ - switch (id) { - case 0: - /* The SSP_DETECT is inverted on this board. */ - return gpio_get_value(MX23_PAD_SSP1_DETECT__GPIO_2_1); - case 1: - /* Phison bridge always present */ - return 1; - default: - return 0; - } -} - -int board_mmc_init(struct bd_info *bis) -{ - int ret; - - /* MicroSD slot */ - gpio_direction_input(MX23_PAD_SSP1_DETECT__GPIO_2_1); - gpio_direction_output(MX23_PAD_GPMI_D07__GPIO_0_7, 0); - ret = mxsmmc_initialize(bis, 0, NULL, xfi3_mmc_cd); - if (ret) - return ret; - - /* Phison SD-NAND bridge */ - ret = mxsmmc_initialize(bis, 1, NULL, xfi3_mmc_cd); - - return ret; -} -#endif - -#ifdef CONFIG_VIDEO_MXS -static int mxsfb_write_byte(uint32_t payload, const unsigned int data) -{ - struct mxs_lcdif_regs *regs = (struct mxs_lcdif_regs *)MXS_LCDIF_BASE; - const unsigned int timeout = 0x10000; - - if (mxs_wait_mask_clr(®s->hw_lcdif_ctrl_reg, LCDIF_CTRL_RUN, - timeout)) - return -ETIMEDOUT; - - writel((1 << LCDIF_TRANSFER_COUNT_V_COUNT_OFFSET) | - (1 << LCDIF_TRANSFER_COUNT_H_COUNT_OFFSET), - ®s->hw_lcdif_transfer_count); - - writel(LCDIF_CTRL_DATA_SELECT | LCDIF_CTRL_RUN, - ®s->hw_lcdif_ctrl_clr); - - if (data) - writel(LCDIF_CTRL_DATA_SELECT, ®s->hw_lcdif_ctrl_set); - - writel(LCDIF_CTRL_RUN, ®s->hw_lcdif_ctrl_set); - - if (mxs_wait_mask_clr(®s->hw_lcdif_lcdif_stat_reg, 1 << 29, - timeout)) - return -ETIMEDOUT; - - writel(payload, ®s->hw_lcdif_data); - return mxs_wait_mask_clr(®s->hw_lcdif_ctrl_reg, LCDIF_CTRL_RUN, - timeout); -} - -static void mxsfb_write_register(uint32_t reg, uint32_t data) -{ - mxsfb_write_byte(reg, 0); - mxsfb_write_byte(data, 1); -} - -static const struct { - uint8_t reg; - uint8_t delay; - uint16_t val; -} lcd_regs[] = { - { 0x01, 0, 0x001c }, - { 0x02, 0, 0x0100 }, - /* Writing 0x30 to reg. 0x03 flips the LCD */ - { 0x03, 0, 0x1038 }, - { 0x08, 0, 0x0808 }, - /* This can contain 0x111 to rotate the LCD. */ - { 0x0c, 0, 0x0000 }, - { 0x0f, 0, 0x0c01 }, - { 0x20, 0, 0x0000 }, - { 0x21, 30, 0x0000 }, - /* Wait 30 mS here */ - { 0x10, 0, 0x0a00 }, - { 0x11, 30, 0x1038 }, - /* Wait 30 mS here */ - { 0x12, 0, 0x1010 }, - { 0x13, 0, 0x0050 }, - { 0x14, 0, 0x4f58 }, - { 0x30, 0, 0x0000 }, - { 0x31, 0, 0x00db }, - { 0x32, 0, 0x0000 }, - { 0x33, 0, 0x0000 }, - { 0x34, 0, 0x00db }, - { 0x35, 0, 0x0000 }, - { 0x36, 0, 0x00af }, - { 0x37, 0, 0x0000 }, - { 0x38, 0, 0x00db }, - { 0x39, 0, 0x0000 }, - { 0x50, 0, 0x0000 }, - { 0x51, 0, 0x0705 }, - { 0x52, 0, 0x0e0a }, - { 0x53, 0, 0x0300 }, - { 0x54, 0, 0x0a0e }, - { 0x55, 0, 0x0507 }, - { 0x56, 0, 0x0000 }, - { 0x57, 0, 0x0003 }, - { 0x58, 0, 0x090a }, - { 0x59, 30, 0x0a09 }, - /* Wait 30 mS here */ - { 0x07, 30, 0x1017 }, - /* Wait 40 mS here */ - { 0x36, 0, 0x00af }, - { 0x37, 0, 0x0000 }, - { 0x38, 0, 0x00db }, - { 0x39, 0, 0x0000 }, - { 0x20, 0, 0x0000 }, - { 0x21, 0, 0x0000 }, -}; - -void mxsfb_system_setup(void) -{ - struct mxs_lcdif_regs *regs = (struct mxs_lcdif_regs *)MXS_LCDIF_BASE; - int i; - - /* Switch the LCDIF into System-Mode */ - writel(LCDIF_CTRL_LCDIF_MASTER | LCDIF_CTRL_DOTCLK_MODE | - LCDIF_CTRL_BYPASS_COUNT, ®s->hw_lcdif_ctrl_clr); - - /* Restart the SmartLCD controller */ - mdelay(50); - writel(1, ®s->hw_lcdif_ctrl1_set); - mdelay(50); - writel(1, ®s->hw_lcdif_ctrl1_clr); - mdelay(50); - writel(1, ®s->hw_lcdif_ctrl1_set); - mdelay(50); - - /* Program the SmartLCD controller */ - writel(LCDIF_CTRL1_RECOVER_ON_UNDERFLOW, ®s->hw_lcdif_ctrl1_set); - - writel((0x03 << LCDIF_TIMING_CMD_HOLD_OFFSET) | - (0x03 << LCDIF_TIMING_CMD_SETUP_OFFSET) | - (0x03 << LCDIF_TIMING_DATA_HOLD_OFFSET) | - (0x02 << LCDIF_TIMING_DATA_SETUP_OFFSET), - ®s->hw_lcdif_timing); - - /* - * OTM2201A init and configuration sequence. - */ - for (i = 0; i < ARRAY_SIZE(lcd_regs); i++) { - mxsfb_write_register(lcd_regs[i].reg, lcd_regs[i].val); - if (lcd_regs[i].delay) - mdelay(lcd_regs[i].delay); - } - /* Turn on Framebuffer Upload Mode */ - mxsfb_write_byte(0x22, 0); - - writel(LCDIF_CTRL_LCDIF_MASTER | LCDIF_CTRL_DATA_SELECT, - ®s->hw_lcdif_ctrl_set); -} -#endif - -int board_init(void) -{ - /* Adress of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - - /* Turn on PWM backlight */ - gpio_direction_output(MX23_PAD_PWM2__GPIO_1_28, 1); - - return 0; -} - -int board_eth_init(struct bd_info *bis) -{ - usb_eth_initialize(bis); - return 0; -} diff --git a/configs/xfi3_defconfig b/configs/xfi3_defconfig deleted file mode 100644 index c49319c3c2..0000000000 --- a/configs/xfi3_defconfig +++ /dev/null @@ -1,43 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_MX23=y -CONFIG_SYS_TEXT_BASE=0x40002000 -CONFIG_SPL_GPIO_SUPPORT=y -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_NR_DRAM_BANKS=1 -CONFIG_ENV_SIZE=0x4000 -CONFIG_SPL_TEXT_BASE=0x00001000 -CONFIG_TARGET_XFI3=y -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_SPL=y -CONFIG_BOOTDELAY=3 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyAMA0,115200n8 " -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_ARCH_MISC_INIT=y -CONFIG_BOARD_EARLY_INIT_F=y -# CONFIG_SPL_FRAMEWORK is not set -CONFIG_HUSH_PARSER=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_PING=y -CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_ENV_OVERWRITE=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_VERSION_VARIABLE=y -CONFIG_NETCONSOLE=y -CONFIG_MXS_GPIO=y -CONFIG_MMC_MXS=y -CONFIG_CONS_INDEX=0 -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_GADGET=y -CONFIG_CI_UDC=y -CONFIG_USB_ETHER=y -CONFIG_USB_ETH_CDC=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/xfi3.h b/include/configs/xfi3.h deleted file mode 100644 index 80849129b9..0000000000 --- a/include/configs/xfi3.h +++ /dev/null @@ -1,39 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2013 Marek Vasut - */ -#ifndef __CONFIGS_XFI3_H__ -#define __CONFIGS_XFI3_H__ - -/* U-Boot Commands */ - -/* Memory configuration */ -#define PHYS_SDRAM_1 0x40000000 /* Base address */ -#define PHYS_SDRAM_1_SIZE 0x08000000 /* Max 128 MB RAM */ -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 - -/* Environment */ - -/* Booting Linux */ -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_LOADADDR 0x42000000 -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR - -/* LCD */ -#ifdef CONFIG_VIDEO -#define CONFIG_VIDEO_FONT_4X6 -#define CONFIG_VIDEO_MXS_MODE_SYSTEM -#define CONFIG_SYS_BLACK_IN_WRITE -#define LCD_BPP LCD_COLOR16 -#endif - -/* USB */ -#ifdef CONFIG_CMD_USB -#define CONFIG_EHCI_MXS_PORT0 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 -#endif - -/* The rest of the configuration is shared */ -#include - -#endif /* __CONFIGS_XFI3_H__ */