mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-24 21:54:01 +00:00
riscv: dts: sync mpfs-icicle devicetree with linux
The "notable" disappearances are: - the pac193x stanza - there's nothing in mainline linux w.r.t. bindings for this & what is going to appear in mainline linux is going to be incompatible with what is currently in U-Boot. - operating points - these operating points should not be set at the soc.dtsi level as they may not be possible depending on the design programmed to the FPGA - clock output names - there are defines for the clock indices, these should not be needed - the dt maintainers in linux NAKed using defines for IRQ numbers - the qspi nand, which is not part of the icicle's default configuration is removed. Reviewed-by: Padmarao Begari <padmarao.begari@microchip.com> Tested-by: Padmarao Begari <padmarao.begari@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Rick Chen <rick@andestech.com>
This commit is contained in:
Conor Dooley
Leo Yu-Chi Liang
parent
5566cf2a6d
commit
4e99899bd5
6 changed files with 420 additions and 525 deletions
71
arch/riscv/dts/mpfs-icicle-kit-fabric.dtsi
Normal file
71
arch/riscv/dts/mpfs-icicle-kit-fabric.dtsi
Normal file
|
|
@ -0,0 +1,71 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
||||
/* Copyright (c) 2020-2021 Microchip Technology Inc */
|
||||
|
||||
/ {
|
||||
compatible = "microchip,mpfs-icicle-reference-rtlv2210", "microchip,mpfs-icicle-kit",
|
||||
"microchip,mpfs";
|
||||
|
||||
core_pwm0: pwm@40000000 {
|
||||
compatible = "microchip,corepwm-rtl-v4";
|
||||
reg = <0x0 0x40000000 0x0 0xF0>;
|
||||
microchip,sync-update-mask = /bits/ 32 <0>;
|
||||
#pwm-cells = <3>;
|
||||
clocks = <&ccc_nw CLK_CCC_PLL0_OUT3>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c2: i2c@40000200 {
|
||||
compatible = "microchip,corei2c-rtl-v7";
|
||||
reg = <0x0 0x40000200 0x0 0x100>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&ccc_nw CLK_CCC_PLL0_OUT3>;
|
||||
interrupt-parent = <&plic>;
|
||||
interrupts = <122>;
|
||||
clock-frequency = <100000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pcie: pcie@3000000000 {
|
||||
compatible = "microchip,pcie-host-1.0";
|
||||
#address-cells = <0x3>;
|
||||
#interrupt-cells = <0x1>;
|
||||
#size-cells = <0x2>;
|
||||
device_type = "pci";
|
||||
reg = <0x30 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>;
|
||||
reg-names = "cfg", "apb";
|
||||
bus-range = <0x0 0x7f>;
|
||||
interrupt-parent = <&plic>;
|
||||
interrupts = <119>;
|
||||
interrupt-map = <0 0 0 1 &pcie_intc 0>,
|
||||
<0 0 0 2 &pcie_intc 1>,
|
||||
<0 0 0 3 &pcie_intc 2>,
|
||||
<0 0 0 4 &pcie_intc 3>;
|
||||
interrupt-map-mask = <0 0 0 7>;
|
||||
clocks = <&ccc_nw CLK_CCC_PLL0_OUT1>, <&ccc_nw CLK_CCC_PLL0_OUT3>;
|
||||
clock-names = "fic1", "fic3";
|
||||
ranges = <0x3000000 0x0 0x8000000 0x30 0x8000000 0x0 0x80000000>;
|
||||
dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x1 0x00000000>;
|
||||
msi-parent = <&pcie>;
|
||||
msi-controller;
|
||||
status = "disabled";
|
||||
pcie_intc: interrupt-controller {
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-controller;
|
||||
};
|
||||
};
|
||||
|
||||
refclk_ccc: cccrefclk {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&ccc_nw {
|
||||
clocks = <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>,
|
||||
<&refclk_ccc>, <&refclk_ccc>;
|
||||
clock-names = "pll0_ref0", "pll0_ref1", "pll1_ref0", "pll1_ref1",
|
||||
"dll0_ref", "dll1_ref";
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -7,29 +7,63 @@
|
|||
/dts-v1/;
|
||||
|
||||
#include "mpfs.dtsi"
|
||||
#include "mpfs-icicle-kit-fabric.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/* Clock frequency (in Hz) of the rtcclk */
|
||||
#define RTCCLK_FREQ 1000000
|
||||
|
||||
/ {
|
||||
model = "Microchip PolarFire-SoC Icicle Kit";
|
||||
compatible = "microchip,mpfs-icicle-reference-rtlv2210",
|
||||
"microchip,mpfs-icicle-kit", "microchip,mpfs";
|
||||
compatible = "microchip,mpfs-icicle-reference-rtlv2210", "microchip,mpfs-icicle-kit",
|
||||
"microchip,mpfs";
|
||||
|
||||
aliases {
|
||||
serial1 = &uart1;
|
||||
ethernet0 = &mac1;
|
||||
spi0 = &qspi;
|
||||
serial0 = &mmuart0;
|
||||
serial1 = &mmuart1;
|
||||
serial2 = &mmuart2;
|
||||
serial3 = &mmuart3;
|
||||
serial4 = &mmuart4;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial1";
|
||||
stdout-path = "serial1:115200n8";
|
||||
};
|
||||
|
||||
cpus {
|
||||
timebase-frequency = <RTCCLK_FREQ>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-1 {
|
||||
gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
label = "led1";
|
||||
};
|
||||
|
||||
led-2 {
|
||||
gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
label = "led2";
|
||||
};
|
||||
|
||||
led-3 {
|
||||
gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
|
||||
color = <LED_COLOR_ID_AMBER>;
|
||||
label = "led3";
|
||||
};
|
||||
|
||||
led-4 {
|
||||
gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
|
||||
color = <LED_COLOR_ID_AMBER>;
|
||||
label = "led4";
|
||||
};
|
||||
};
|
||||
|
||||
ddrc_cache_lo: memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x80000000 0x0 0x40000000>;
|
||||
|
|
@ -54,83 +88,121 @@
|
|||
};
|
||||
};
|
||||
|
||||
&refclk {
|
||||
clock-frequency = <125000000>;
|
||||
&core_pwm0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
&gpio2 {
|
||||
interrupts = <53>, <53>, <53>, <53>,
|
||||
<53>, <53>, <53>, <53>,
|
||||
<53>, <53>, <53>, <53>,
|
||||
<53>, <53>, <53>, <53>,
|
||||
<53>, <53>, <53>, <53>,
|
||||
<53>, <53>, <53>, <53>,
|
||||
<53>, <53>, <53>, <53>,
|
||||
<53>, <53>, <53>, <53>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mac0 {
|
||||
phy-mode = "sgmii";
|
||||
phy-handle = <&phy0>;
|
||||
status = "enabled";
|
||||
};
|
||||
|
||||
&mac1 {
|
||||
phy-mode = "sgmii";
|
||||
phy-handle = <&phy1>;
|
||||
status = "okay";
|
||||
|
||||
phy1: ethernet-phy@9 {
|
||||
reg = <9>;
|
||||
};
|
||||
|
||||
phy0: ethernet-phy@8 {
|
||||
reg = <8>;
|
||||
};
|
||||
};
|
||||
|
||||
&mbox {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc {
|
||||
status = "okay";
|
||||
|
||||
bus-width = <4>;
|
||||
disable-wp;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
card-detect-delay = <200>;
|
||||
cap-mmc-highspeed;
|
||||
mmc-ddr-1_8v;
|
||||
mmc-hs200-1_8v;
|
||||
sd-uhs-sdr12;
|
||||
sd-uhs-sdr25;
|
||||
sd-uhs-sdr50;
|
||||
sd-uhs-sdr104;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
&mmuart1 {
|
||||
status = "okay";
|
||||
clock-frequency = <100000>;
|
||||
|
||||
pac193x: pac193x@10 {
|
||||
compatible = "microchip,pac1934";
|
||||
reg = <0x10>;
|
||||
samp-rate = <64>;
|
||||
status = "okay";
|
||||
ch1: channel0 {
|
||||
uohms-shunt-res = <10000>;
|
||||
rail-name = "VDDREG";
|
||||
channel_enabled;
|
||||
};
|
||||
ch2: channel1 {
|
||||
uohms-shunt-res = <10000>;
|
||||
rail-name = "VDDA25";
|
||||
channel_enabled;
|
||||
};
|
||||
ch3: channel2 {
|
||||
uohms-shunt-res = <10000>;
|
||||
rail-name = "VDD25";
|
||||
channel_enabled;
|
||||
};
|
||||
ch4: channel3 {
|
||||
uohms-shunt-res = <10000>;
|
||||
rail-name = "VDDA_REG";
|
||||
channel_enabled;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mac1 {
|
||||
&mmuart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmuart3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmuart4 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
phy-mode = "sgmii";
|
||||
phy-handle = <&phy1>;
|
||||
phy1: ethernet-phy@9 {
|
||||
reg = <9>;
|
||||
ti,fifo-depth = <0x1>;
|
||||
};
|
||||
};
|
||||
|
||||
&qspi {
|
||||
status = "okay";
|
||||
num-cs = <1>;
|
||||
|
||||
flash0: flash@0 {
|
||||
compatible = "spi-nand";
|
||||
reg = <0x0>;
|
||||
spi-tx-bus-width = <4>;
|
||||
spi-rx-bus-width = <4>;
|
||||
spi-max-frequency = <20000000>;
|
||||
spi-cpol;
|
||||
spi-cpha;
|
||||
};
|
||||
};
|
||||
|
||||
&refclk {
|
||||
clock-frequency = <125000000>;
|
||||
};
|
||||
|
||||
&refclk_ccc {
|
||||
clock-frequency = <50000000>;
|
||||
};
|
||||
|
||||
&rtc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&syscontroller {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb {
|
||||
status = "okay";
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -2,8 +2,6 @@
|
|||
/* Copyright (c) 2020-2021 Microchip Technology Inc */
|
||||
|
||||
#include "dt-bindings/clock/microchip-mpfs-clock.h"
|
||||
#include "dt-bindings/interrupt-controller/microchip-mpfs-plic.h"
|
||||
#include "dt-bindings/interrupt-controller/riscv-hart.h"
|
||||
|
||||
/ {
|
||||
#address-cells = <2>;
|
||||
|
|
@ -11,9 +9,6 @@
|
|||
model = "Microchip PolarFire SoC";
|
||||
compatible = "microchip,mpfs";
|
||||
|
||||
chosen {
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
@ -28,12 +23,7 @@
|
|||
riscv,isa = "rv64imac";
|
||||
clocks = <&clkcfg CLK_CPU>;
|
||||
status = "disabled";
|
||||
operating-points = <
|
||||
/* kHz uV */
|
||||
600000 1100000
|
||||
300000 950000
|
||||
150000 750000
|
||||
>;
|
||||
|
||||
cpu0_intc: interrupt-controller {
|
||||
#interrupt-cells = <1>;
|
||||
compatible = "riscv,cpu-intc";
|
||||
|
|
@ -59,13 +49,9 @@
|
|||
riscv,isa = "rv64imafdc";
|
||||
clocks = <&clkcfg CLK_CPU>;
|
||||
tlb-split;
|
||||
next-level-cache = <&cctrllr>;
|
||||
status = "okay";
|
||||
operating-points = <
|
||||
/* kHz uV */
|
||||
600000 1100000
|
||||
300000 950000
|
||||
150000 750000
|
||||
>;
|
||||
|
||||
cpu1_intc: interrupt-controller {
|
||||
#interrupt-cells = <1>;
|
||||
compatible = "riscv,cpu-intc";
|
||||
|
|
@ -91,13 +77,9 @@
|
|||
riscv,isa = "rv64imafdc";
|
||||
clocks = <&clkcfg CLK_CPU>;
|
||||
tlb-split;
|
||||
next-level-cache = <&cctrllr>;
|
||||
status = "okay";
|
||||
operating-points = <
|
||||
/* kHz uV */
|
||||
600000 1100000
|
||||
300000 950000
|
||||
150000 750000
|
||||
>;
|
||||
|
||||
cpu2_intc: interrupt-controller {
|
||||
#interrupt-cells = <1>;
|
||||
compatible = "riscv,cpu-intc";
|
||||
|
|
@ -123,13 +105,9 @@
|
|||
riscv,isa = "rv64imafdc";
|
||||
clocks = <&clkcfg CLK_CPU>;
|
||||
tlb-split;
|
||||
next-level-cache = <&cctrllr>;
|
||||
status = "okay";
|
||||
operating-points = <
|
||||
/* kHz uV */
|
||||
600000 1100000
|
||||
300000 950000
|
||||
150000 750000
|
||||
>;
|
||||
|
||||
cpu3_intc: interrupt-controller {
|
||||
#interrupt-cells = <1>;
|
||||
compatible = "riscv,cpu-intc";
|
||||
|
|
@ -155,273 +133,322 @@
|
|||
riscv,isa = "rv64imafdc";
|
||||
clocks = <&clkcfg CLK_CPU>;
|
||||
tlb-split;
|
||||
next-level-cache = <&cctrllr>;
|
||||
status = "okay";
|
||||
operating-points = <
|
||||
/* kHz uV */
|
||||
600000 1100000
|
||||
300000 950000
|
||||
150000 750000
|
||||
>;
|
||||
cpu4_intc: interrupt-controller {
|
||||
#interrupt-cells = <1>;
|
||||
compatible = "riscv,cpu-intc";
|
||||
interrupt-controller;
|
||||
};
|
||||
};
|
||||
|
||||
cpu-map {
|
||||
cluster0 {
|
||||
core0 {
|
||||
cpu = <&cpu0>;
|
||||
};
|
||||
|
||||
core1 {
|
||||
cpu = <&cpu1>;
|
||||
};
|
||||
|
||||
core2 {
|
||||
cpu = <&cpu2>;
|
||||
};
|
||||
|
||||
core3 {
|
||||
cpu = <&cpu3>;
|
||||
};
|
||||
|
||||
core4 {
|
||||
cpu = <&cpu4>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
refclk: refclk {
|
||||
refclk: mssrefclk {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
syscontroller: syscontroller {
|
||||
compatible = "microchip,mpfs-sys-controller";
|
||||
mboxes = <&mbox 0>;
|
||||
};
|
||||
|
||||
soc {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
compatible = "microchip,mpfs-soc", "simple-bus";
|
||||
compatible = "simple-bus";
|
||||
ranges;
|
||||
|
||||
clint: clint@2000000 {
|
||||
compatible = "sifive,clint0";
|
||||
reg = <0x0 0x2000000 0x0 0xC000>;
|
||||
interrupts-extended =
|
||||
<&cpu0_intc HART_INT_M_SOFT &cpu0_intc HART_INT_M_TIMER
|
||||
&cpu1_intc HART_INT_M_SOFT &cpu1_intc HART_INT_M_TIMER
|
||||
&cpu2_intc HART_INT_M_SOFT &cpu2_intc HART_INT_M_TIMER
|
||||
&cpu3_intc HART_INT_M_SOFT &cpu3_intc HART_INT_M_TIMER
|
||||
&cpu4_intc HART_INT_M_SOFT &cpu4_intc HART_INT_M_TIMER>;
|
||||
};
|
||||
|
||||
cachecontroller: cache-controller@2010000 {
|
||||
compatible = "sifive,fu540-c000-ccache", "cache";
|
||||
cctrllr: cache-controller@2010000 {
|
||||
compatible = "microchip,mpfs-ccache", "sifive,fu540-c000-ccache", "cache";
|
||||
reg = <0x0 0x2010000 0x0 0x1000>;
|
||||
interrupt-parent = <&plic>;
|
||||
interrupts = <PLIC_INT_L2_METADATA_CORR
|
||||
PLIC_INT_L2_METADATA_UNCORR
|
||||
PLIC_INT_L2_DATA_CORR>;
|
||||
cache-block-size = <64>;
|
||||
cache-level = <2>;
|
||||
cache-sets = <1024>;
|
||||
cache-size = <2097152>;
|
||||
cache-unified;
|
||||
interrupt-parent = <&plic>;
|
||||
interrupts = <1>, <3>, <4>, <2>;
|
||||
};
|
||||
|
||||
pdma: pdma@3000000 {
|
||||
compatible = "microchip,mpfs-pdma-uio","sifive,fu540-c000-pdma";
|
||||
reg = <0x0 0x3000000 0x0 0x8000>;
|
||||
interrupt-parent = <&plic>;
|
||||
interrupts = <PLIC_INT_DMA_CH0_DONE PLIC_INT_DMA_CH0_ERR
|
||||
PLIC_INT_DMA_CH1_DONE PLIC_INT_DMA_CH1_ERR
|
||||
PLIC_INT_DMA_CH2_DONE PLIC_INT_DMA_CH2_ERR
|
||||
PLIC_INT_DMA_CH3_DONE PLIC_INT_DMA_CH3_ERR>;
|
||||
#dma-cells = <1>;
|
||||
clint: clint@2000000 {
|
||||
compatible = "sifive,fu540-c000-clint", "sifive,clint0";
|
||||
reg = <0x0 0x2000000 0x0 0xC000>;
|
||||
interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
|
||||
<&cpu1_intc 3>, <&cpu1_intc 7>,
|
||||
<&cpu2_intc 3>, <&cpu2_intc 7>,
|
||||
<&cpu3_intc 3>, <&cpu3_intc 7>,
|
||||
<&cpu4_intc 3>, <&cpu4_intc 7>;
|
||||
};
|
||||
|
||||
plic: interrupt-controller@c000000 {
|
||||
compatible = "sifive,plic-1.0.0";
|
||||
compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0";
|
||||
reg = <0x0 0xc000000 0x0 0x4000000>;
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <1>;
|
||||
riscv,ndev = <186>;
|
||||
interrupt-controller;
|
||||
interrupts-extended = <&cpu0_intc HART_INT_M_EXT
|
||||
&cpu1_intc HART_INT_M_EXT &cpu1_intc HART_INT_S_EXT
|
||||
&cpu2_intc HART_INT_M_EXT &cpu2_intc HART_INT_S_EXT
|
||||
&cpu3_intc HART_INT_M_EXT &cpu3_intc HART_INT_S_EXT
|
||||
&cpu4_intc HART_INT_M_EXT &cpu4_intc HART_INT_S_EXT>;
|
||||
interrupts-extended = <&cpu0_intc 11>,
|
||||
<&cpu1_intc 11>, <&cpu1_intc 9>,
|
||||
<&cpu2_intc 11>, <&cpu2_intc 9>,
|
||||
<&cpu3_intc 11>, <&cpu3_intc 9>,
|
||||
<&cpu4_intc 11>, <&cpu4_intc 9>;
|
||||
riscv,ndev = <186>;
|
||||
};
|
||||
|
||||
pdma: dma-controller@3000000 {
|
||||
compatible = "sifive,fu540-c000-pdma", "sifive,pdma0";
|
||||
reg = <0x0 0x3000000 0x0 0x8000>;
|
||||
interrupt-parent = <&plic>;
|
||||
interrupts = <5 6>, <7 8>, <9 10>, <11 12>;
|
||||
dma-channels = <4>;
|
||||
#dma-cells = <1>;
|
||||
};
|
||||
|
||||
clkcfg: clkcfg@20002000 {
|
||||
compatible = "microchip,mpfs-clkcfg";
|
||||
reg = <0x0 0x20002000 0x0 0x1000>, <0x0 0x3E001000 0x0 0x1000>;
|
||||
reg-names = "mss_sysreg";
|
||||
clocks = <&refclk>;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "cpu", "axi", "ahb", "envm", /* 0-3 */
|
||||
"mac0", "mac1", "mmc", "timer", /* 4-7 */
|
||||
"mmuart0", "mmuart1", "mmuart2", "mmuart3", /* 8-11 */
|
||||
"mmuart4", "spi0", "spi1", "i2c0", /* 12-15 */
|
||||
"i2c1", "can0", "can1", "usb", /* 16-19 */
|
||||
"rsvd", "rtc", "qspi", "gpio0", /* 20-23 */
|
||||
"gpio1", "gpio2", "ddrc", "fic0", /* 24-27 */
|
||||
"fic1", "fic2", "fic3", "athena", "cfm"; /* 28-32 */
|
||||
#reset-cells = <1>;
|
||||
};
|
||||
|
||||
/* Common node entry for eMMC/SD */
|
||||
mmc: mmc@20008000 {
|
||||
compatible = "microchip,mpfs-sd4hc","cdns,sd4hc";
|
||||
reg = <0x0 0x20008000 0x0 0x1000>;
|
||||
clocks = <&clkcfg CLK_MMC>;
|
||||
interrupt-parent = <&plic>;
|
||||
interrupts = <PLIC_INT_MMC_MAIN PLIC_INT_MMC_WAKEUP>;
|
||||
max-frequency = <200000000>;
|
||||
ccc_se: clock-controller@38010000 {
|
||||
compatible = "microchip,mpfs-ccc";
|
||||
reg = <0x0 0x38010000 0x0 0x1000>, <0x0 0x38020000 0x0 0x1000>,
|
||||
<0x0 0x39010000 0x0 0x1000>, <0x0 0x39020000 0x0 0x1000>;
|
||||
#clock-cells = <1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart0: serial@20000000 {
|
||||
ccc_ne: clock-controller@38040000 {
|
||||
compatible = "microchip,mpfs-ccc";
|
||||
reg = <0x0 0x38040000 0x0 0x1000>, <0x0 0x38080000 0x0 0x1000>,
|
||||
<0x0 0x39040000 0x0 0x1000>, <0x0 0x39080000 0x0 0x1000>;
|
||||
#clock-cells = <1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ccc_nw: clock-controller@38100000 {
|
||||
compatible = "microchip,mpfs-ccc";
|
||||
reg = <0x0 0x38100000 0x0 0x1000>, <0x0 0x38200000 0x0 0x1000>,
|
||||
<0x0 0x39100000 0x0 0x1000>, <0x0 0x39200000 0x0 0x1000>;
|
||||
#clock-cells = <1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ccc_sw: clock-controller@38400000 {
|
||||
compatible = "microchip,mpfs-ccc";
|
||||
reg = <0x0 0x38400000 0x0 0x1000>, <0x0 0x38800000 0x0 0x1000>,
|
||||
<0x0 0x39400000 0x0 0x1000>, <0x0 0x39800000 0x0 0x1000>;
|
||||
#clock-cells = <1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mmuart0: serial@20000000 {
|
||||
compatible = "ns16550a";
|
||||
reg = <0x0 0x20000000 0x0 0x400>;
|
||||
reg-io-width = <4>;
|
||||
reg-shift = <2>;
|
||||
interrupt-parent = <&plic>;
|
||||
interrupts = <PLIC_INT_MMUART0>;
|
||||
interrupts = <90>;
|
||||
current-speed = <115200>;
|
||||
clocks = <&clkcfg CLK_MMUART0>;
|
||||
status = "disabled"; /* Reserved for the HSS */
|
||||
};
|
||||
|
||||
uart1: serial@20100000 {
|
||||
mmuart1: serial@20100000 {
|
||||
compatible = "ns16550a";
|
||||
reg = <0x0 0x20100000 0x0 0x400>;
|
||||
reg-io-width = <4>;
|
||||
reg-shift = <2>;
|
||||
interrupt-parent = <&plic>;
|
||||
interrupts = <PLIC_INT_MMUART1>;
|
||||
interrupts = <91>;
|
||||
current-speed = <115200>;
|
||||
clocks = <&clkcfg CLK_MMUART1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart2: serial@20102000 {
|
||||
mmuart2: serial@20102000 {
|
||||
compatible = "ns16550a";
|
||||
reg = <0x0 0x20102000 0x0 0x400>;
|
||||
reg-io-width = <4>;
|
||||
reg-shift = <2>;
|
||||
interrupt-parent = <&plic>;
|
||||
interrupts = <PLIC_INT_MMUART2>;
|
||||
interrupts = <92>;
|
||||
current-speed = <115200>;
|
||||
clocks = <&clkcfg CLK_MMUART2>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart3: serial@20104000 {
|
||||
mmuart3: serial@20104000 {
|
||||
compatible = "ns16550a";
|
||||
reg = <0x0 0x20104000 0x0 0x400>;
|
||||
reg-io-width = <4>;
|
||||
reg-shift = <2>;
|
||||
interrupt-parent = <&plic>;
|
||||
interrupts = <PLIC_INT_MMUART3>;
|
||||
interrupts = <93>;
|
||||
current-speed = <115200>;
|
||||
clocks = <&clkcfg CLK_MMUART3>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart4: serial@20106000 {
|
||||
mmuart4: serial@20106000 {
|
||||
compatible = "ns16550a";
|
||||
reg = <0x0 0x20106000 0x0 0x400>;
|
||||
reg-io-width = <4>;
|
||||
reg-shift = <2>;
|
||||
interrupt-parent = <&plic>;
|
||||
interrupts = <PLIC_INT_MMUART4>;
|
||||
interrupts = <94>;
|
||||
clocks = <&clkcfg CLK_MMUART4>;
|
||||
current-speed = <115200>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/* Common node entry for emmc/sd */
|
||||
mmc: mmc@20008000 {
|
||||
compatible = "microchip,mpfs-sd4hc", "cdns,sd4hc";
|
||||
reg = <0x0 0x20008000 0x0 0x1000>;
|
||||
interrupt-parent = <&plic>;
|
||||
interrupts = <88>;
|
||||
clocks = <&clkcfg CLK_MMC>;
|
||||
max-frequency = <200000000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
spi0: spi@20108000 {
|
||||
compatible = "microchip,mpfs-spi";
|
||||
reg = <0x0 0x20108000 0x0 0x1000>;
|
||||
clocks = <&clkcfg CLK_SPI0>;
|
||||
interrupt-parent = <&plic>;
|
||||
interrupts = <PLIC_INT_SPI0>;
|
||||
num-cs = <8>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x0 0x20108000 0x0 0x1000>;
|
||||
interrupt-parent = <&plic>;
|
||||
interrupts = <54>;
|
||||
clocks = <&clkcfg CLK_SPI0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
spi1: spi@20109000 {
|
||||
compatible = "microchip,mpfs-spi";
|
||||
reg = <0x0 0x20109000 0x0 0x1000>;
|
||||
clocks = <&clkcfg CLK_SPI1>;
|
||||
interrupt-parent = <&plic>;
|
||||
interrupts = <PLIC_INT_SPI1>;
|
||||
num-cs = <8>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x0 0x20109000 0x0 0x1000>;
|
||||
interrupt-parent = <&plic>;
|
||||
interrupts = <55>;
|
||||
clocks = <&clkcfg CLK_SPI1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
qspi: spi@21000000 {
|
||||
compatible = "microchip,mpfs-qspi", "microchip,coreqspi-rtl-v2";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x0 0x21000000 0x0 0x1000>;
|
||||
interrupt-parent = <&plic>;
|
||||
interrupts = <85>;
|
||||
clocks = <&clkcfg CLK_QSPI>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c0: i2c@2010a000 {
|
||||
compatible = "microchip,mpfs-i2c";
|
||||
compatible = "microchip,mpfs-i2c", "microchip,corei2c-rtl-v7";
|
||||
reg = <0x0 0x2010a000 0x0 0x1000>;
|
||||
clocks = <&clkcfg CLK_I2C0>;
|
||||
interrupt-parent = <&plic>;
|
||||
interrupts = <PLIC_INT_I2C0_MAIN>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupt-parent = <&plic>;
|
||||
interrupts = <58>;
|
||||
clocks = <&clkcfg CLK_I2C0>;
|
||||
clock-frequency = <100000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c1: i2c@2010b000 {
|
||||
compatible = "microchip,mpfs-i2c";
|
||||
compatible = "microchip,mpfs-i2c", "microchip,corei2c-rtl-v7";
|
||||
reg = <0x0 0x2010b000 0x0 0x1000>;
|
||||
clocks = <&clkcfg CLK_I2C1>;
|
||||
interrupt-parent = <&plic>;
|
||||
interrupts = <PLIC_INT_I2C1_MAIN>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupt-parent = <&plic>;
|
||||
interrupts = <61>;
|
||||
clocks = <&clkcfg CLK_I2C1>;
|
||||
clock-frequency = <100000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
can0: can@2010c000 {
|
||||
compatible = "microchip,mpfs-can-uio";
|
||||
compatible = "microchip,mpfs-can";
|
||||
reg = <0x0 0x2010c000 0x0 0x1000>;
|
||||
clocks = <&clkcfg CLK_CAN0>;
|
||||
interrupt-parent = <&plic>;
|
||||
interrupts = <PLIC_INT_CAN0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <56>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
can1: can@2010d000 {
|
||||
compatible = "microchip,mpfs-can-uio";
|
||||
compatible = "microchip,mpfs-can";
|
||||
reg = <0x0 0x2010d000 0x0 0x1000>;
|
||||
clocks = <&clkcfg CLK_CAN1>;
|
||||
interrupt-parent = <&plic>;
|
||||
interrupts = <PLIC_INT_CAN1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <57>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mac0: ethernet@20110000 {
|
||||
compatible = "cdns,macb";
|
||||
compatible = "microchip,mpfs-macb", "cdns,macb";
|
||||
reg = <0x0 0x20110000 0x0 0x2000>;
|
||||
clocks = <&clkcfg CLK_MAC0>, <&clkcfg CLK_AHB>;
|
||||
clock-names = "pclk", "hclk";
|
||||
interrupt-parent = <&plic>;
|
||||
interrupts = <PLIC_INT_MAC0_INT
|
||||
PLIC_INT_MAC0_QUEUE1
|
||||
PLIC_INT_MAC0_QUEUE2
|
||||
PLIC_INT_MAC0_QUEUE3
|
||||
PLIC_INT_MAC0_EMAC
|
||||
PLIC_INT_MAC0_MMSL>;
|
||||
local-mac-address = [00 00 00 00 00 00];
|
||||
status = "disabled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupt-parent = <&plic>;
|
||||
interrupts = <64>, <65>, <66>, <67>, <68>, <69>;
|
||||
local-mac-address = [00 00 00 00 00 00];
|
||||
clocks = <&clkcfg CLK_MAC0>, <&clkcfg CLK_AHB>;
|
||||
clock-names = "pclk", "hclk";
|
||||
resets = <&clkcfg CLK_MAC0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mac1: ethernet@20112000 {
|
||||
compatible = "cdns,macb";
|
||||
compatible = "microchip,mpfs-macb", "cdns,macb";
|
||||
reg = <0x0 0x20112000 0x0 0x2000>;
|
||||
clocks = <&clkcfg CLK_MAC1>, <&clkcfg CLK_AHB>;
|
||||
clock-names = "pclk", "hclk";
|
||||
interrupt-parent = <&plic>;
|
||||
interrupts = <PLIC_INT_MAC1_INT
|
||||
PLIC_INT_MAC1_QUEUE1
|
||||
PLIC_INT_MAC1_QUEUE2
|
||||
PLIC_INT_MAC1_QUEUE3
|
||||
PLIC_INT_MAC1_EMAC
|
||||
PLIC_INT_MAC1_MMSL>;
|
||||
local-mac-address = [00 00 00 00 00 00];
|
||||
status = "disabled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupt-parent = <&plic>;
|
||||
interrupts = <70>, <71>, <72>, <73>, <74>, <75>;
|
||||
local-mac-address = [00 00 00 00 00 00];
|
||||
clocks = <&clkcfg CLK_MAC1>, <&clkcfg CLK_AHB>;
|
||||
clock-names = "pclk", "hclk";
|
||||
resets = <&clkcfg CLK_MAC1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpio0: gpio@20120000 {
|
||||
compatible = "microchip,mpfs-gpio";
|
||||
reg = <0x0 0x20120000 0x0 0x1000>;
|
||||
reg-names = "control";
|
||||
clocks = <&clkcfg CLK_GPIO0>;
|
||||
interrupt-parent = <&plic>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
clocks = <&clkcfg CLK_GPIO0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
status = "disabled";
|
||||
|
|
@ -429,10 +456,11 @@
|
|||
|
||||
gpio1: gpio@20121000 {
|
||||
compatible = "microchip,mpfs-gpio";
|
||||
reg = <000 0x20121000 0x0 0x1000>;
|
||||
reg-names = "control";
|
||||
clocks = <&clkcfg CLK_GPIO1>;
|
||||
reg = <0x0 0x20121000 0x0 0x1000>;
|
||||
interrupt-parent = <&plic>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
clocks = <&clkcfg CLK_GPIO1>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
status = "disabled";
|
||||
|
|
@ -441,9 +469,10 @@
|
|||
gpio2: gpio@20122000 {
|
||||
compatible = "microchip,mpfs-gpio";
|
||||
reg = <0x0 0x20122000 0x0 0x1000>;
|
||||
reg-names = "control";
|
||||
clocks = <&clkcfg CLK_GPIO2>;
|
||||
interrupt-parent = <&plic>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
clocks = <&clkcfg CLK_GPIO2>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
status = "disabled";
|
||||
|
|
@ -452,118 +481,31 @@
|
|||
rtc: rtc@20124000 {
|
||||
compatible = "microchip,mpfs-rtc";
|
||||
reg = <0x0 0x20124000 0x0 0x1000>;
|
||||
clocks = <&clkcfg CLK_RTC>;
|
||||
clock-names = "rtc";
|
||||
interrupt-parent = <&plic>;
|
||||
interrupts = <PLIC_INT_RTC_WAKEUP PLIC_INT_RTC_MATCH>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <80>, <81>;
|
||||
clocks = <&clkcfg CLK_RTC>, <&clkcfg CLK_RTCREF>;
|
||||
clock-names = "rtc", "rtcref";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb: usb@20201000 {
|
||||
compatible = "microchip,mpfs-usb-host";
|
||||
compatible = "microchip,mpfs-musb";
|
||||
reg = <0x0 0x20201000 0x0 0x1000>;
|
||||
reg-names = "mc","control";
|
||||
interrupt-parent = <&plic>;
|
||||
interrupts = <86>, <87>;
|
||||
clocks = <&clkcfg CLK_USB>;
|
||||
interrupt-parent = <&plic>;
|
||||
interrupts = <PLIC_INT_USB_DMA PLIC_INT_USB_MC>;
|
||||
interrupt-names = "dma","mc";
|
||||
dr_mode = "host";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
qspi: qspi@21000000 {
|
||||
compatible = "microchip,mpfs-qspi";
|
||||
reg = <0x0 0x21000000 0x0 0x1000>;
|
||||
clocks = <&clkcfg CLK_QSPI>;
|
||||
interrupt-parent = <&plic>;
|
||||
interrupts = <PLIC_INT_QSPI>;
|
||||
num-cs = <8>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mbox: mailbox@37020000 {
|
||||
compatible = "microchip,mpfs-mailbox";
|
||||
reg = <0x0 0x37020000 0x0 0x1000>, <0x0 0x2000318C 0x0 0x40>;
|
||||
reg = <0x0 0x37020000 0x0 0x58>, <0x0 0x2000318C 0x0 0x40>,
|
||||
<0x0 0x37020800 0x0 0x100>;
|
||||
interrupt-parent = <&plic>;
|
||||
interrupts = <PLIC_INT_G5C_MESSAGE>;
|
||||
interrupts = <96>;
|
||||
#mbox-cells = <1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pcie: pcie@2000000000 {
|
||||
compatible = "microchip,pcie-host-1.0";
|
||||
#address-cells = <0x3>;
|
||||
#interrupt-cells = <0x1>;
|
||||
#size-cells = <0x2>;
|
||||
device_type = "pci";
|
||||
reg = <0x20 0x0 0x0 0x8000000 0x0 0x43000000 0x0 0x10000>;
|
||||
reg-names = "cfg", "apb";
|
||||
clocks = <&clkcfg CLK_FIC0>, <&clkcfg CLK_FIC1>, <&clkcfg CLK_FIC3>;
|
||||
clock-names = "fic0", "fic1", "fic3";
|
||||
bus-range = <0x0 0x7f>;
|
||||
interrupt-parent = <&plic>;
|
||||
interrupts = <PLIC_INT_FABRIC_F2H_2>;
|
||||
interrupt-map = <0 0 0 1 &pcie_intc 0>,
|
||||
<0 0 0 2 &pcie_intc 1>,
|
||||
<0 0 0 3 &pcie_intc 2>,
|
||||
<0 0 0 4 &pcie_intc 3>;
|
||||
interrupt-map-mask = <0 0 0 7>;
|
||||
ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>;
|
||||
msi-parent = <&pcie>;
|
||||
msi-controller;
|
||||
mchp,axi-m-atr0 = <0x10 0x0>;
|
||||
status = "disabled";
|
||||
pcie_intc: legacy-interrupt-controller {
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-controller;
|
||||
};
|
||||
};
|
||||
|
||||
syscontroller: syscontroller {
|
||||
compatible = "microchip,mpfs-sys-controller";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
mboxes = <&mbox 0>;
|
||||
};
|
||||
|
||||
hwrandom: hwrandom {
|
||||
compatible = "microchip,mpfs-rng";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
syscontroller = <&syscontroller>;
|
||||
};
|
||||
|
||||
serialnum: serialnum {
|
||||
compatible = "microchip,mpfs-serial-number";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
syscontroller = <&syscontroller>;
|
||||
};
|
||||
|
||||
fpgadigest: fpgadigest {
|
||||
compatible = "microchip,mpfs-digest";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
syscontroller = <&syscontroller>;
|
||||
};
|
||||
|
||||
devicecert: cert {
|
||||
compatible = "microchip,mpfs-device-cert";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
syscontroller = <&syscontroller>;
|
||||
};
|
||||
|
||||
signature: signature {
|
||||
compatible = "microchip,mpfs-signature";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
syscontroller = <&syscontroller>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
|
||||
/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
|
||||
/*
|
||||
* Copyright (C) 2020 Microchip Technology Inc.
|
||||
* Padmarao Begari <padmarao.begari@microchip.com>
|
||||
* Daire McNamara,<daire.mcnamara@microchip.com>
|
||||
* Copyright (C) 2020-2022 Microchip Technology Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
#ifndef _DT_BINDINGS_CLK_MICROCHIP_MPFS_H_
|
||||
|
|
@ -45,4 +45,27 @@
|
|||
#define CLK_RTCREF 33
|
||||
#define CLK_MSSPLL 34
|
||||
|
||||
/* Clock Conditioning Circuitry Clock IDs */
|
||||
|
||||
#define CLK_CCC_PLL0 0
|
||||
#define CLK_CCC_PLL1 1
|
||||
#define CLK_CCC_DLL0 2
|
||||
#define CLK_CCC_DLL1 3
|
||||
|
||||
#define CLK_CCC_PLL0_OUT0 4
|
||||
#define CLK_CCC_PLL0_OUT1 5
|
||||
#define CLK_CCC_PLL0_OUT2 6
|
||||
#define CLK_CCC_PLL0_OUT3 7
|
||||
|
||||
#define CLK_CCC_PLL1_OUT0 8
|
||||
#define CLK_CCC_PLL1_OUT1 9
|
||||
#define CLK_CCC_PLL1_OUT2 10
|
||||
#define CLK_CCC_PLL1_OUT3 11
|
||||
|
||||
#define CLK_CCC_DLL0_OUT0 12
|
||||
#define CLK_CCC_DLL0_OUT1 13
|
||||
|
||||
#define CLK_CCC_DLL1_OUT0 14
|
||||
#define CLK_CCC_DLL1_OUT1 15
|
||||
|
||||
#endif /* _DT_BINDINGS_CLK_MICROCHIP_MPFS_H_ */
|
||||
|
|
|
|||
|
|
@ -1,196 +0,0 @@
|
|||
/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
|
||||
/* Copyright (c) 2020-2021 Microchip Technology Inc */
|
||||
|
||||
#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_MICROCHIP_MPFS_PLIC_H
|
||||
#define _DT_BINDINGS_INTERRUPT_CONTROLLER_MICROCHIP_MPFS_PLIC_H
|
||||
|
||||
#define PLIC_INT_INVALID 0
|
||||
#define PLIC_INT_L2_METADATA_CORR 1
|
||||
#define PLIC_INT_L2_METADATA_UNCORR 2
|
||||
#define PLIC_INT_L2_DATA_CORR 3
|
||||
#define PLIC_INT_L2_DATA_UNCORR 4
|
||||
#define PLIC_INT_DMA_CH0_DONE 5
|
||||
#define PLIC_INT_DMA_CH0_ERR 6
|
||||
#define PLIC_INT_DMA_CH1_DONE 7
|
||||
#define PLIC_INT_DMA_CH1_ERR 8
|
||||
#define PLIC_INT_DMA_CH2_DONE 9
|
||||
#define PLIC_INT_DMA_CH2_ERR 10
|
||||
#define PLIC_INT_DMA_CH3_DONE 11
|
||||
#define PLIC_INT_DMA_CH3_ERR 12
|
||||
|
||||
#define PLIC_INT_GPIO0_BIT0_OR_GPIO2_BIT0 13
|
||||
#define PLIC_INT_GPIO0_BIT1_OR_GPIO2_BIT1 14
|
||||
#define PLIC_INT_GPIO0_BIT2_OR_GPIO2_BIT2 15
|
||||
#define PLIC_INT_GPIO0_BIT3_OR_GPIO2_BIT3 16
|
||||
#define PLIC_INT_GPIO0_BIT4_OR_GPIO2_BIT4 17
|
||||
#define PLIC_INT_GPIO0_BIT5_OR_GPIO2_BIT5 18
|
||||
#define PLIC_INT_GPIO0_BIT6_OR_GPIO2_BIT6 19
|
||||
#define PLIC_INT_GPIO0_BIT7_OR_GPIO2_BIT7 20
|
||||
#define PLIC_INT_GPIO0_BIT8_OR_GPIO2_BIT8 21
|
||||
#define PLIC_INT_GPIO0_BIT9_OR_GPIO2_BIT9 22
|
||||
#define PLIC_INT_GPIO0_BIT10_OR_GPIO2_BIT10 23
|
||||
#define PLIC_INT_GPIO0_BIT11_OR_GPIO2_BIT11 24
|
||||
#define PLIC_INT_GPIO0_BIT12_OR_GPIO2_BIT12 25
|
||||
#define PLIC_INT_GPIO0_BIT13_OR_GPIO2_BIT13 26
|
||||
#define PLIC_INT_GPIO1_BIT0_OR_GPIO2_BIT14 27
|
||||
#define PLIC_INT_GPIO1_BIT1_OR_GPIO2_BIT15 28
|
||||
#define PLIC_INT_GPIO1_BIT2_OR_GPIO2_BIT16 29
|
||||
#define PLIC_INT_GPIO1_BIT3_OR_GPIO2_BIT17 30
|
||||
#define PLIC_INT_GPIO1_BIT4_OR_GPIO2_BIT18 31
|
||||
#define PLIC_INT_GPIO1_BIT5_OR_GPIO2_BIT19 32
|
||||
#define PLIC_INT_GPIO1_BIT6_OR_GPIO2_BIT20 33
|
||||
#define PLIC_INT_GPIO1_BIT7_OR_GPIO2_BIT21 34
|
||||
#define PLIC_INT_GPIO1_BIT8_OR_GPIO2_BIT22 35
|
||||
#define PLIC_INT_GPIO1_BIT9_OR_GPIO2_BIT23 36
|
||||
#define PLIC_INT_GPIO1_BIT10_OR_GPIO2_BIT24 37
|
||||
#define PLIC_INT_GPIO1_BIT11_OR_GPIO2_BIT25 38
|
||||
#define PLIC_INT_GPIO1_BIT12_OR_GPIO2_BIT26 39
|
||||
#define PLIC_INT_GPIO1_BIT13_OR_GPIO2_BIT27 40
|
||||
#define PLIC_INT_GPIO1_BIT14_OR_GPIO2_BIT28 41
|
||||
#define PLIC_INT_GPIO1_BIT15_OR_GPIO2_BIT29 42
|
||||
#define PLIC_INT_GPIO1_BIT16_OR_GPIO2_BIT30 43
|
||||
#define PLIC_INT_GPIO1_BIT17_OR_GPIO2_BIT31 44
|
||||
#define PLIC_INT_GPIO1_BIT18 45
|
||||
#define PLIC_INT_GPIO1_BIT19 46
|
||||
#define PLIC_INT_GPIO1_BIT20 47
|
||||
#define PLIC_INT_GPIO1_BIT21 48
|
||||
#define PLIC_INT_GPIO1_BIT22 49
|
||||
#define PLIC_INT_GPIO1_BIT23 50
|
||||
#define PLIC_INT_GPIO0_NON_DIRECT 51
|
||||
#define PLIC_INT_GPIO1_NON_DIRECT 52
|
||||
#define PLIC_INT_GPIO2_NON_DIRECT 53
|
||||
#define PLIC_INT_SPI0 54
|
||||
#define PLIC_INT_SPI1 55
|
||||
#define PLIC_INT_CAN0 56
|
||||
#define PLIC_INT_CAN1 57
|
||||
#define PLIC_INT_I2C0_MAIN 58
|
||||
#define PLIC_INT_I2C0_ALERT 59
|
||||
#define PLIC_INT_I2C0_SUS 60
|
||||
#define PLIC_INT_I2C1_MAIN 61
|
||||
#define PLIC_INT_I2C1_ALERT 62
|
||||
#define PLIC_INT_I2C1_SUS 63
|
||||
#define PLIC_INT_MAC0_INT 64
|
||||
#define PLIC_INT_MAC0_QUEUE1 65
|
||||
#define PLIC_INT_MAC0_QUEUE2 66
|
||||
#define PLIC_INT_MAC0_QUEUE3 67
|
||||
#define PLIC_INT_MAC0_EMAC 68
|
||||
#define PLIC_INT_MAC0_MMSL 69
|
||||
#define PLIC_INT_MAC1_INT 70
|
||||
#define PLIC_INT_MAC1_QUEUE1 71
|
||||
#define PLIC_INT_MAC1_QUEUE2 72
|
||||
#define PLIC_INT_MAC1_QUEUE3 73
|
||||
#define PLIC_INT_MAC1_EMAC 74
|
||||
#define PLIC_INT_MAC1_MMSL 75
|
||||
#define PLIC_INT_DDRC_TRAIN 76
|
||||
#define PLIC_INT_SCB_INTERRUPT 77
|
||||
#define PLIC_INT_ECC_ERROR 78
|
||||
#define PLIC_INT_ECC_CORRECT 79
|
||||
#define PLIC_INT_RTC_WAKEUP 80
|
||||
#define PLIC_INT_RTC_MATCH 81
|
||||
#define PLIC_INT_TIMER1 82
|
||||
#define PLIC_INT_TIMER2 83
|
||||
#define PLIC_INT_ENVM 84
|
||||
#define PLIC_INT_QSPI 85
|
||||
#define PLIC_INT_USB_DMA 86
|
||||
#define PLIC_INT_USB_MC 87
|
||||
#define PLIC_INT_MMC_MAIN 88
|
||||
#define PLIC_INT_MMC_WAKEUP 89
|
||||
#define PLIC_INT_MMUART0 90
|
||||
#define PLIC_INT_MMUART1 91
|
||||
#define PLIC_INT_MMUART2 92
|
||||
#define PLIC_INT_MMUART3 93
|
||||
#define PLIC_INT_MMUART4 94
|
||||
#define PLIC_INT_G5C_DEVRST 95
|
||||
#define PLIC_INT_G5C_MESSAGE 96
|
||||
#define PLIC_INT_USOC_VC_INTERRUPT 97
|
||||
#define PLIC_INT_USOC_SMB_INTERRUPT 98
|
||||
#define PLIC_INT_E51_0_MAINTENACE 99
|
||||
#define PLIC_INT_WDOG0_MRVP 100
|
||||
#define PLIC_INT_WDOG1_MRVP 101
|
||||
#define PLIC_INT_WDOG2_MRVP 102
|
||||
#define PLIC_INT_WDOG3_MRVP 103
|
||||
#define PLIC_INT_WDOG4_MRVP 104
|
||||
#define PLIC_INT_WDOG0_TOUT 105
|
||||
#define PLIC_INT_WDOG1_TOUT 106
|
||||
#define PLIC_INT_WDOG2_TOUT 107
|
||||
#define PLIC_INT_WDOG3_TOUT 108
|
||||
#define PLIC_INT_WDOG4_TOUT 109
|
||||
#define PLIC_INT_G5C_MSS_SPI 110
|
||||
#define PLIC_INT_VOLT_TEMP_ALARM 111
|
||||
#define PLIC_INT_ATHENA_COMPLETE 112
|
||||
#define PLIC_INT_ATHENA_ALARM 113
|
||||
#define PLIC_INT_ATHENA_BUS_ERROR 114
|
||||
#define PLIC_INT_USOC_AXIC_US 115
|
||||
#define PLIC_INT_USOC_AXIC_DS 116
|
||||
#define PLIC_INT_SPARE 117
|
||||
#define PLIC_INT_FABRIC_F2H_0 118
|
||||
#define PLIC_INT_FABRIC_F2H_1 119
|
||||
#define PLIC_INT_FABRIC_F2H_2 120
|
||||
#define PLIC_INT_FABRIC_F2H_3 121
|
||||
#define PLIC_INT_FABRIC_F2H_4 122
|
||||
#define PLIC_INT_FABRIC_F2H_5 123
|
||||
#define PLIC_INT_FABRIC_F2H_6 124
|
||||
#define PLIC_INT_FABRIC_F2H_7 125
|
||||
#define PLIC_INT_FABRIC_F2H_8 126
|
||||
#define PLIC_INT_FABRIC_F2H_9 127
|
||||
#define PLIC_INT_FABRIC_F2H_10 128
|
||||
#define PLIC_INT_FABRIC_F2H_11 129
|
||||
#define PLIC_INT_FABRIC_F2H_12 130
|
||||
#define PLIC_INT_FABRIC_F2H_13 131
|
||||
#define PLIC_INT_FABRIC_F2H_14 132
|
||||
#define PLIC_INT_FABRIC_F2H_15 133
|
||||
#define PLIC_INT_FABRIC_F2H_16 134
|
||||
#define PLIC_INT_FABRIC_F2H_17 135
|
||||
#define PLIC_INT_FABRIC_F2H_18 136
|
||||
#define PLIC_INT_FABRIC_F2H_19 137
|
||||
#define PLIC_INT_FABRIC_F2H_20 138
|
||||
#define PLIC_INT_FABRIC_F2H_21 139
|
||||
#define PLIC_INT_FABRIC_F2H_22 140
|
||||
#define PLIC_INT_FABRIC_F2H_23 141
|
||||
#define PLIC_INT_FABRIC_F2H_24 142
|
||||
#define PLIC_INT_FABRIC_F2H_25 143
|
||||
#define PLIC_INT_FABRIC_F2H_26 144
|
||||
#define PLIC_INT_FABRIC_F2H_27 145
|
||||
#define PLIC_INT_FABRIC_F2H_28 146
|
||||
#define PLIC_INT_FABRIC_F2H_29 147
|
||||
#define PLIC_INT_FABRIC_F2H_30 148
|
||||
#define PLIC_INT_FABRIC_F2H_31 149
|
||||
#define PLIC_INT_FABRIC_F2H_32 150
|
||||
#define PLIC_INT_FABRIC_F2H_33 151
|
||||
#define PLIC_INT_FABRIC_F2H_34 152
|
||||
#define PLIC_INT_FABRIC_F2H_35 153
|
||||
#define PLIC_INT_FABRIC_F2H_36 154
|
||||
#define PLIC_INT_FABRIC_F2H_37 155
|
||||
#define PLIC_INT_FABRIC_F2H_38 156
|
||||
#define PLIC_INT_FABRIC_F2H_39 157
|
||||
#define PLIC_INT_FABRIC_F2H_40 158
|
||||
#define PLIC_INT_FABRIC_F2H_41 159
|
||||
#define PLIC_INT_FABRIC_F2H_42 160
|
||||
#define PLIC_INT_FABRIC_F2H_43 161
|
||||
#define PLIC_INT_FABRIC_F2H_44 162
|
||||
#define PLIC_INT_FABRIC_F2H_45 163
|
||||
#define PLIC_INT_FABRIC_F2H_46 164
|
||||
#define PLIC_INT_FABRIC_F2H_47 165
|
||||
#define PLIC_INT_FABRIC_F2H_48 166
|
||||
#define PLIC_INT_FABRIC_F2H_49 167
|
||||
#define PLIC_INT_FABRIC_F2H_50 168
|
||||
#define PLIC_INT_FABRIC_F2H_51 169
|
||||
#define PLIC_INT_FABRIC_F2H_52 170
|
||||
#define PLIC_INT_FABRIC_F2H_53 171
|
||||
#define PLIC_INT_FABRIC_F2H_54 172
|
||||
#define PLIC_INT_FABRIC_F2H_55 173
|
||||
#define PLIC_INT_FABRIC_F2H_56 174
|
||||
#define PLIC_INT_FABRIC_F2H_57 175
|
||||
#define PLIC_INT_FABRIC_F2H_58 176
|
||||
#define PLIC_INT_FABRIC_F2H_59 177
|
||||
#define PLIC_INT_FABRIC_F2H_60 178
|
||||
#define PLIC_INT_FABRIC_F2H_61 179
|
||||
#define PLIC_INT_FABRIC_F2H_62 180
|
||||
#define PLIC_INT_FABRIC_F2H_63 181
|
||||
#define PLIC_INT_BUS_ERROR_UNIT_HART_0 182
|
||||
#define PLIC_INT_BUS_ERROR_UNIT_HART_1 183
|
||||
#define PLIC_INT_BUS_ERROR_UNIT_HART_2 184
|
||||
#define PLIC_INT_BUS_ERROR_UNIT_HART_3 185
|
||||
#define PLIC_INT_BUS_ERROR_UNIT_HART_4 186
|
||||
|
||||
#endif /* _DT_BINDINGS_INTERRUPT_CONTROLLER_MICROCHIP_MPFS_PLIC_H */
|
||||
|
|
@ -1,17 +0,0 @@
|
|||
/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
|
||||
/* Copyright (c) 2020-2021 Microchip Technology Inc */
|
||||
|
||||
#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_RISCV_HART_H
|
||||
#define _DT_BINDINGS_INTERRUPT_CONTROLLER_RISCV_HART_H
|
||||
|
||||
#define HART_INT_U_SOFT 0
|
||||
#define HART_INT_S_SOFT 1
|
||||
#define HART_INT_M_SOFT 3
|
||||
#define HART_INT_U_TIMER 4
|
||||
#define HART_INT_S_TIMER 5
|
||||
#define HART_INT_M_TIMER 7
|
||||
#define HART_INT_U_EXT 8
|
||||
#define HART_INT_S_EXT 9
|
||||
#define HART_INT_M_EXT 11
|
||||
|
||||
#endif /* _DT_BINDINGS_INTERRUPT_CONTROLLER_RISCV_HART_H */
|
||||
Loading…
Reference in a new issue