mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-10 15:14:43 +00:00
arm: dts: k3-am654: pull in dtb update from Linux
Pull in dtb updates for the am654 base board from v6.7-rc1 of Linux Tested-by: Tom Rini <trini@konsulko.com> Signed-off-by: Bryan Brattlof <bb@ti.com> Reviewed-by: Nishanth Menon <nm@ti.com>
This commit is contained in:
Bryan Brattlof
Tom Rini
parent
b53f19061f
commit
4dbdc84754
6 changed files with 626 additions and 209 deletions
|
|
@ -35,7 +35,10 @@
|
|||
#interrupt-cells = <3>;
|
||||
interrupt-controller;
|
||||
reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */
|
||||
<0x00 0x01880000 0x00 0x90000>; /* GICR */
|
||||
<0x00 0x01880000 0x00 0x90000>, /* GICR */
|
||||
<0x00 0x6f000000 0x00 0x2000>, /* GICC */
|
||||
<0x00 0x6f010000 0x00 0x1000>, /* GICH */
|
||||
<0x00 0x6f020000 0x00 0x2000>; /* GICV */
|
||||
/*
|
||||
* vcpumntirq:
|
||||
* virtual CPU interface maintenance interrupt
|
||||
|
|
@ -88,6 +91,7 @@
|
|||
clock-frequency = <48000000>;
|
||||
current-speed = <115200>;
|
||||
power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
main_uart1: serial@2810000 {
|
||||
|
|
@ -96,6 +100,7 @@
|
|||
interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <48000000>;
|
||||
power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
main_uart2: serial@2820000 {
|
||||
|
|
@ -104,29 +109,47 @@
|
|||
interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <48000000>;
|
||||
power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
crypto: crypto@4e00000 {
|
||||
compatible = "ti,am654-sa2ul";
|
||||
reg = <0x0 0x4e00000 0x0 0x1200>;
|
||||
power-domains = <&k3_pds 136 TI_SCI_PD_EXCLUSIVE>;
|
||||
power-domains = <&k3_pds 136 TI_SCI_PD_SHARED>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges = <0x0 0x04e00000 0x00 0x04e00000 0x0 0x30000>;
|
||||
|
||||
dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>,
|
||||
<&main_udmap 0x4001>;
|
||||
dmas = <&main_udmap 0xc001>, <&main_udmap 0x4002>,
|
||||
<&main_udmap 0x4003>;
|
||||
dma-names = "tx", "rx1", "rx2";
|
||||
dma-coherent;
|
||||
|
||||
rng: rng@4e10000 {
|
||||
compatible = "inside-secure,safexcel-eip76";
|
||||
reg = <0x0 0x4e10000 0x0 0x7d>;
|
||||
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&k3_clks 136 1>;
|
||||
status = "disabled"; /* Used by OP-TEE */
|
||||
};
|
||||
};
|
||||
|
||||
/* TIMERIO pad input CTRLMMR_TIMER*_CTRL registers */
|
||||
main_timerio_input: pinctrl@104200 {
|
||||
compatible = "pinctrl-single";
|
||||
reg = <0x0 0x104200 0x0 0x30>;
|
||||
#pinctrl-cells = <1>;
|
||||
pinctrl-single,register-width = <32>;
|
||||
pinctrl-single,function-mask = <0x0000001ff>;
|
||||
};
|
||||
|
||||
/* TIMERIO pad output CTCTRLMMR_TIMERIO*_CTRL registers */
|
||||
main_timerio_output: pinctrl@104280 {
|
||||
compatible = "pinctrl-single";
|
||||
reg = <0x0 0x104280 0x0 0x20>;
|
||||
#pinctrl-cells = <1>;
|
||||
pinctrl-single,register-width = <32>;
|
||||
pinctrl-single,function-mask = <0x0000000f>;
|
||||
};
|
||||
|
||||
main_pmx0: pinctrl@11c000 {
|
||||
compatible = "pinctrl-single";
|
||||
reg = <0x0 0x11c000 0x0 0x2e4>;
|
||||
|
|
@ -152,6 +175,7 @@
|
|||
clock-names = "fck";
|
||||
clocks = <&k3_clks 110 1>;
|
||||
power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
main_i2c1: i2c@2010000 {
|
||||
|
|
@ -163,6 +187,7 @@
|
|||
clock-names = "fck";
|
||||
clocks = <&k3_clks 111 1>;
|
||||
power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
main_i2c2: i2c@2020000 {
|
||||
|
|
@ -174,6 +199,7 @@
|
|||
clock-names = "fck";
|
||||
clocks = <&k3_clks 112 1>;
|
||||
power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
main_i2c3: i2c@2030000 {
|
||||
|
|
@ -185,6 +211,7 @@
|
|||
clock-names = "fck";
|
||||
clocks = <&k3_clks 113 1>;
|
||||
power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ecap0: pwm@3100000 {
|
||||
|
|
@ -194,6 +221,7 @@
|
|||
power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>;
|
||||
clocks = <&k3_clks 39 0>;
|
||||
clock-names = "fck";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
main_spi0: spi@2100000 {
|
||||
|
|
@ -206,6 +234,7 @@
|
|||
#size-cells = <0>;
|
||||
dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>;
|
||||
dma-names = "tx0", "rx0";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
main_spi1: spi@2110000 {
|
||||
|
|
@ -218,6 +247,7 @@
|
|||
#size-cells = <0>;
|
||||
assigned-clocks = <&k3_clks 137 1>;
|
||||
assigned-clock-rates = <48000000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
main_spi2: spi@2120000 {
|
||||
|
|
@ -228,6 +258,7 @@
|
|||
power-domains = <&k3_pds 139 TI_SCI_PD_EXCLUSIVE>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
main_spi3: spi@2130000 {
|
||||
|
|
@ -238,6 +269,7 @@
|
|||
power-domains = <&k3_pds 140 TI_SCI_PD_EXCLUSIVE>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
main_spi4: spi@2140000 {
|
||||
|
|
@ -248,6 +280,151 @@
|
|||
power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
main_timer0: timer@2400000 {
|
||||
compatible = "ti,am654-timer";
|
||||
reg = <0x00 0x2400000 0x00 0x400>;
|
||||
interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&k3_clks 23 0>;
|
||||
clock-names = "fck";
|
||||
assigned-clocks = <&k3_clks 23 0>;
|
||||
assigned-clock-parents = <&k3_clks 23 1>;
|
||||
power-domains = <&k3_pds 23 TI_SCI_PD_EXCLUSIVE>;
|
||||
ti,timer-pwm;
|
||||
};
|
||||
|
||||
main_timer1: timer@2410000 {
|
||||
compatible = "ti,am654-timer";
|
||||
reg = <0x00 0x2410000 0x00 0x400>;
|
||||
interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&k3_clks 24 0>;
|
||||
clock-names = "fck";
|
||||
assigned-clocks = <&k3_clks 24 0>;
|
||||
assigned-clock-parents = <&k3_clks 24 1>;
|
||||
power-domains = <&k3_pds 24 TI_SCI_PD_EXCLUSIVE>;
|
||||
ti,timer-pwm;
|
||||
};
|
||||
|
||||
main_timer2: timer@2420000 {
|
||||
compatible = "ti,am654-timer";
|
||||
reg = <0x00 0x2420000 0x00 0x400>;
|
||||
interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&k3_clks 27 0>;
|
||||
clock-names = "fck";
|
||||
assigned-clocks = <&k3_clks 27 0>;
|
||||
assigned-clock-parents = <&k3_clks 27 1>;
|
||||
power-domains = <&k3_pds 27 TI_SCI_PD_EXCLUSIVE>;
|
||||
ti,timer-pwm;
|
||||
};
|
||||
|
||||
main_timer3: timer@2430000 {
|
||||
compatible = "ti,am654-timer";
|
||||
reg = <0x00 0x2430000 0x00 0x400>;
|
||||
interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&k3_clks 28 0>;
|
||||
clock-names = "fck";
|
||||
assigned-clocks = <&k3_clks 28 0>;
|
||||
assigned-clock-parents = <&k3_clks 28 1>;
|
||||
power-domains = <&k3_pds 28 TI_SCI_PD_EXCLUSIVE>;
|
||||
ti,timer-pwm;
|
||||
};
|
||||
|
||||
main_timer4: timer@2440000 {
|
||||
compatible = "ti,am654-timer";
|
||||
reg = <0x00 0x2440000 0x00 0x400>;
|
||||
interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&k3_clks 29 0>;
|
||||
clock-names = "fck";
|
||||
assigned-clocks = <&k3_clks 29 0>;
|
||||
assigned-clock-parents = <&k3_clks 29 1>;
|
||||
power-domains = <&k3_pds 29 TI_SCI_PD_EXCLUSIVE>;
|
||||
ti,timer-pwm;
|
||||
};
|
||||
|
||||
main_timer5: timer@2450000 {
|
||||
compatible = "ti,am654-timer";
|
||||
reg = <0x00 0x2450000 0x00 0x400>;
|
||||
interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&k3_clks 30 0>;
|
||||
clock-names = "fck";
|
||||
assigned-clocks = <&k3_clks 30 0>;
|
||||
assigned-clock-parents = <&k3_clks 30 1>;
|
||||
power-domains = <&k3_pds 30 TI_SCI_PD_EXCLUSIVE>;
|
||||
ti,timer-pwm;
|
||||
};
|
||||
|
||||
main_timer6: timer@2460000 {
|
||||
compatible = "ti,am654-timer";
|
||||
reg = <0x00 0x2460000 0x00 0x400>;
|
||||
interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&k3_clks 31 0>;
|
||||
assigned-clocks = <&k3_clks 31 0>;
|
||||
assigned-clock-parents = <&k3_clks 31 1>;
|
||||
clock-names = "fck";
|
||||
power-domains = <&k3_pds 31 TI_SCI_PD_EXCLUSIVE>;
|
||||
ti,timer-pwm;
|
||||
};
|
||||
|
||||
main_timer7: timer@2470000 {
|
||||
compatible = "ti,am654-timer";
|
||||
reg = <0x00 0x2470000 0x00 0x400>;
|
||||
interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&k3_clks 32 0>;
|
||||
clock-names = "fck";
|
||||
assigned-clocks = <&k3_clks 32 0>;
|
||||
assigned-clock-parents = <&k3_clks 32 1>;
|
||||
power-domains = <&k3_pds 32 TI_SCI_PD_EXCLUSIVE>;
|
||||
ti,timer-pwm;
|
||||
};
|
||||
|
||||
main_timer8: timer@2480000 {
|
||||
compatible = "ti,am654-timer";
|
||||
reg = <0x00 0x2480000 0x00 0x400>;
|
||||
interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&k3_clks 33 0>;
|
||||
clock-names = "fck";
|
||||
assigned-clocks = <&k3_clks 33 0>;
|
||||
assigned-clock-parents = <&k3_clks 33 1>;
|
||||
power-domains = <&k3_pds 33 TI_SCI_PD_EXCLUSIVE>;
|
||||
ti,timer-pwm;
|
||||
};
|
||||
|
||||
main_timer9: timer@2490000 {
|
||||
compatible = "ti,am654-timer";
|
||||
reg = <0x00 0x2490000 0x00 0x400>;
|
||||
interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&k3_clks 34 0>;
|
||||
clock-names = "fck";
|
||||
assigned-clocks = <&k3_clks 34 0>;
|
||||
assigned-clock-parents = <&k3_clks 34 1>;
|
||||
power-domains = <&k3_pds 34 TI_SCI_PD_EXCLUSIVE>;
|
||||
ti,timer-pwm;
|
||||
};
|
||||
|
||||
main_timer10: timer@24a0000 {
|
||||
compatible = "ti,am654-timer";
|
||||
reg = <0x00 0x24a0000 0x00 0x400>;
|
||||
interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&k3_clks 25 0>;
|
||||
clock-names = "fck";
|
||||
assigned-clocks = <&k3_clks 25 0>;
|
||||
assigned-clock-parents = <&k3_clks 25 1>;
|
||||
power-domains = <&k3_pds 25 TI_SCI_PD_EXCLUSIVE>;
|
||||
ti,timer-pwm;
|
||||
};
|
||||
|
||||
main_timer11: timer@24b0000 {
|
||||
compatible = "ti,am654-timer";
|
||||
reg = <0x00 0x24b0000 0x00 0x400>;
|
||||
interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&k3_clks 26 0>;
|
||||
clock-names = "fck";
|
||||
assigned-clocks = <&k3_clks 26 0>;
|
||||
assigned-clock-parents = <&k3_clks 26 1>;
|
||||
power-domains = <&k3_pds 26 TI_SCI_PD_EXCLUSIVE>;
|
||||
ti,timer-pwm;
|
||||
};
|
||||
|
||||
sdhci0: mmc@4f80000 {
|
||||
|
|
@ -292,7 +469,6 @@
|
|||
ti,otap-del-sel-ddr52 = <0x4>;
|
||||
ti,otap-del-sel-hs200 = <0x7>;
|
||||
ti,clkbuf-sel = <0x7>;
|
||||
ti,otap-del-sel = <0x2>;
|
||||
ti,trm-icp = <0x8>;
|
||||
dma-coherent;
|
||||
};
|
||||
|
|
@ -304,21 +480,6 @@
|
|||
#size-cells = <1>;
|
||||
ranges = <0x0 0x0 0x00100000 0x1c000>;
|
||||
|
||||
pcie0_mode: pcie-mode@4060 {
|
||||
compatible = "syscon";
|
||||
reg = <0x00004060 0x4>;
|
||||
};
|
||||
|
||||
pcie1_mode: pcie-mode@4070 {
|
||||
compatible = "syscon";
|
||||
reg = <0x00004070 0x4>;
|
||||
};
|
||||
|
||||
pcie_devid: pcie-devid@210 {
|
||||
compatible = "syscon";
|
||||
reg = <0x00000210 0x4>;
|
||||
};
|
||||
|
||||
serdes0_clk: clock@4080 {
|
||||
compatible = "syscon";
|
||||
reg = <0x00004080 0x4>;
|
||||
|
|
@ -338,11 +499,11 @@
|
|||
|
||||
dss_oldi_io_ctrl: dss-oldi-io-ctrl@41e0 {
|
||||
compatible = "syscon";
|
||||
reg = <0x0000041e0 0x14>;
|
||||
reg = <0x000041e0 0x14>;
|
||||
};
|
||||
|
||||
ehrpwm_tbclk: clock@4140 {
|
||||
compatible = "ti,am654-ehrpwm-tbclk", "syscon";
|
||||
ehrpwm_tbclk: clock-controller@4140 {
|
||||
compatible = "ti,am654-ehrpwm-tbclk";
|
||||
reg = <0x4140 0x18>;
|
||||
#clock-cells = <1>;
|
||||
};
|
||||
|
|
@ -439,7 +600,7 @@
|
|||
};
|
||||
|
||||
main_navss: bus@30800000 {
|
||||
compatible = "simple-mfd";
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges = <0x0 0x30800000 0x0 0x30800000 0x0 0xbc00000>;
|
||||
|
|
@ -497,6 +658,7 @@
|
|||
ti,mbox-num-users = <4>;
|
||||
ti,mbox-num-fifos = <16>;
|
||||
interrupt-parent = <&intr_main_navss>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mailbox0_cluster1: mailbox@31f81000 {
|
||||
|
|
@ -506,6 +668,7 @@
|
|||
ti,mbox-num-users = <4>;
|
||||
ti,mbox-num-fifos = <16>;
|
||||
interrupt-parent = <&intr_main_navss>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mailbox0_cluster2: mailbox@31f82000 {
|
||||
|
|
@ -515,6 +678,7 @@
|
|||
ti,mbox-num-users = <4>;
|
||||
ti,mbox-num-fifos = <16>;
|
||||
interrupt-parent = <&intr_main_navss>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mailbox0_cluster3: mailbox@31f83000 {
|
||||
|
|
@ -524,6 +688,7 @@
|
|||
ti,mbox-num-users = <4>;
|
||||
ti,mbox-num-fifos = <16>;
|
||||
interrupt-parent = <&intr_main_navss>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mailbox0_cluster4: mailbox@31f84000 {
|
||||
|
|
@ -533,6 +698,7 @@
|
|||
ti,mbox-num-users = <4>;
|
||||
ti,mbox-num-fifos = <16>;
|
||||
interrupt-parent = <&intr_main_navss>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mailbox0_cluster5: mailbox@31f85000 {
|
||||
|
|
@ -542,6 +708,7 @@
|
|||
ti,mbox-num-users = <4>;
|
||||
ti,mbox-num-fifos = <16>;
|
||||
interrupt-parent = <&intr_main_navss>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mailbox0_cluster6: mailbox@31f86000 {
|
||||
|
|
@ -551,6 +718,7 @@
|
|||
ti,mbox-num-users = <4>;
|
||||
ti,mbox-num-fifos = <16>;
|
||||
interrupt-parent = <&intr_main_navss>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mailbox0_cluster7: mailbox@31f87000 {
|
||||
|
|
@ -560,6 +728,7 @@
|
|||
ti,mbox-num-users = <4>;
|
||||
ti,mbox-num-fifos = <16>;
|
||||
interrupt-parent = <&intr_main_navss>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mailbox0_cluster8: mailbox@31f88000 {
|
||||
|
|
@ -569,6 +738,7 @@
|
|||
ti,mbox-num-users = <4>;
|
||||
ti,mbox-num-fifos = <16>;
|
||||
interrupt-parent = <&intr_main_navss>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mailbox0_cluster9: mailbox@31f89000 {
|
||||
|
|
@ -578,6 +748,7 @@
|
|||
ti,mbox-num-users = <4>;
|
||||
ti,mbox-num-fifos = <16>;
|
||||
interrupt-parent = <&intr_main_navss>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mailbox0_cluster10: mailbox@31f8a000 {
|
||||
|
|
@ -587,6 +758,7 @@
|
|||
ti,mbox-num-users = <4>;
|
||||
ti,mbox-num-fifos = <16>;
|
||||
interrupt-parent = <&intr_main_navss>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mailbox0_cluster11: mailbox@31f8b000 {
|
||||
|
|
@ -596,6 +768,7 @@
|
|||
ti,mbox-num-users = <4>;
|
||||
ti,mbox-num-fifos = <16>;
|
||||
interrupt-parent = <&intr_main_navss>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ringacc: ringacc@3c000000 {
|
||||
|
|
@ -603,8 +776,9 @@
|
|||
reg = <0x0 0x3c000000 0x0 0x400000>,
|
||||
<0x0 0x38000000 0x0 0x400000>,
|
||||
<0x0 0x31120000 0x0 0x100>,
|
||||
<0x0 0x33000000 0x0 0x40000>;
|
||||
reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
|
||||
<0x0 0x33000000 0x0 0x40000>,
|
||||
<0x0 0x31080000 0x0 0x40000>;
|
||||
reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
|
||||
ti,num-rings = <818>;
|
||||
ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
|
||||
ti,sci = <&dmsc>;
|
||||
|
|
@ -692,10 +866,10 @@
|
|||
power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges = <0x81000000 0 0 0x0 0x10020000 0 0x00010000
|
||||
0x82000000 0 0x10030000 0x0 0x10030000 0 0x07FD0000>;
|
||||
ti,syscon-pcie-id = <&pcie_devid>;
|
||||
ti,syscon-pcie-mode = <&pcie0_mode>;
|
||||
ranges = <0x81000000 0 0 0x0 0x10020000 0 0x00010000>,
|
||||
<0x82000000 0 0x10030000 0x0 0x10030000 0 0x07FD0000>;
|
||||
ti,syscon-pcie-id = <&scm_conf 0x210>;
|
||||
ti,syscon-pcie-mode = <&scm_conf 0x4060>;
|
||||
bus-range = <0x0 0xff>;
|
||||
num-viewport = <16>;
|
||||
max-link-speed = <2>;
|
||||
|
|
@ -703,6 +877,7 @@
|
|||
interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
|
||||
msi-map = <0x0 &gic_its 0x0 0x10000>;
|
||||
device_type = "pci";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pcie0_ep: pcie-ep@5500000 {
|
||||
|
|
@ -710,12 +885,13 @@
|
|||
reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x8000000>, <0x0 0x5506000 0x0 0x1000>;
|
||||
reg-names = "app", "dbics", "addr_space", "atu";
|
||||
power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
|
||||
ti,syscon-pcie-mode = <&pcie0_mode>;
|
||||
ti,syscon-pcie-mode = <&scm_conf 0x4060>;
|
||||
num-ib-windows = <16>;
|
||||
num-ob-windows = <16>;
|
||||
max-link-speed = <2>;
|
||||
dma-coherent;
|
||||
interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pcie1_rc: pcie@5600000 {
|
||||
|
|
@ -725,10 +901,10 @@
|
|||
power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges = <0x81000000 0 0 0x0 0x18020000 0 0x00010000
|
||||
0x82000000 0 0x18030000 0x0 0x18030000 0 0x07FD0000>;
|
||||
ti,syscon-pcie-id = <&pcie_devid>;
|
||||
ti,syscon-pcie-mode = <&pcie1_mode>;
|
||||
ranges = <0x81000000 0 0 0x0 0x18020000 0 0x00010000>,
|
||||
<0x82000000 0 0x18030000 0x0 0x18030000 0 0x07FD0000>;
|
||||
ti,syscon-pcie-id = <&scm_conf 0x210>;
|
||||
ti,syscon-pcie-mode = <&scm_conf 0x4070>;
|
||||
bus-range = <0x0 0xff>;
|
||||
num-viewport = <16>;
|
||||
max-link-speed = <2>;
|
||||
|
|
@ -736,6 +912,7 @@
|
|||
interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
|
||||
msi-map = <0x0 &gic_its 0x10000 0x10000>;
|
||||
device_type = "pci";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pcie1_ep: pcie-ep@5600000 {
|
||||
|
|
@ -743,12 +920,13 @@
|
|||
reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x4000000>, <0x0 0x5606000 0x0 0x1000>;
|
||||
reg-names = "app", "dbics", "addr_space", "atu";
|
||||
power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>;
|
||||
ti,syscon-pcie-mode = <&pcie1_mode>;
|
||||
ti,syscon-pcie-mode = <&scm_conf 0x4070>;
|
||||
num-ib-windows = <16>;
|
||||
num-ob-windows = <16>;
|
||||
max-link-speed = <2>;
|
||||
dma-coherent;
|
||||
interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mcasp0: mcasp@2b00000 {
|
||||
|
|
@ -766,6 +944,7 @@
|
|||
clocks = <&k3_clks 104 0>;
|
||||
clock-names = "fck";
|
||||
power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mcasp1: mcasp@2b10000 {
|
||||
|
|
@ -783,6 +962,7 @@
|
|||
clocks = <&k3_clks 105 0>;
|
||||
clock-names = "fck";
|
||||
power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mcasp2: mcasp@2b20000 {
|
||||
|
|
@ -800,6 +980,7 @@
|
|||
clocks = <&k3_clks 106 0>;
|
||||
clock-names = "fck";
|
||||
power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
cal: cal@6f03000 {
|
||||
|
|
@ -870,6 +1051,7 @@
|
|||
power-domains = <&k3_pds 40 TI_SCI_PD_EXCLUSIVE>;
|
||||
clocks = <&ehrpwm_tbclk 0>, <&k3_clks 40 0>;
|
||||
clock-names = "tbclk", "fck";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ehrpwm1: pwm@3010000 {
|
||||
|
|
@ -879,6 +1061,7 @@
|
|||
power-domains = <&k3_pds 41 TI_SCI_PD_EXCLUSIVE>;
|
||||
clocks = <&ehrpwm_tbclk 1>, <&k3_clks 41 0>;
|
||||
clock-names = "tbclk", "fck";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ehrpwm2: pwm@3020000 {
|
||||
|
|
@ -888,6 +1071,7 @@
|
|||
power-domains = <&k3_pds 42 TI_SCI_PD_EXCLUSIVE>;
|
||||
clocks = <&ehrpwm_tbclk 2>, <&k3_clks 42 0>;
|
||||
clock-names = "tbclk", "fck";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ehrpwm3: pwm@3030000 {
|
||||
|
|
@ -897,6 +1081,7 @@
|
|||
power-domains = <&k3_pds 43 TI_SCI_PD_EXCLUSIVE>;
|
||||
clocks = <&ehrpwm_tbclk 3>, <&k3_clks 43 0>;
|
||||
clock-names = "tbclk", "fck";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ehrpwm4: pwm@3040000 {
|
||||
|
|
@ -906,6 +1091,7 @@
|
|||
power-domains = <&k3_pds 44 TI_SCI_PD_EXCLUSIVE>;
|
||||
clocks = <&ehrpwm_tbclk 4>, <&k3_clks 44 0>;
|
||||
clock-names = "tbclk", "fck";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ehrpwm5: pwm@3050000 {
|
||||
|
|
@ -915,6 +1101,7 @@
|
|||
power-domains = <&k3_pds 45 TI_SCI_PD_EXCLUSIVE>;
|
||||
clocks = <&ehrpwm_tbclk 5>, <&k3_clks 45 0>;
|
||||
clock-names = "tbclk", "fck";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
icssg0: icssg@b000000 {
|
||||
|
|
@ -964,6 +1151,18 @@
|
|||
};
|
||||
};
|
||||
|
||||
icssg0_iep0: iep@2e000 {
|
||||
compatible = "ti,am654-icss-iep";
|
||||
reg = <0x2e000 0x1000>;
|
||||
clocks = <&icssg0_iepclk_mux>;
|
||||
};
|
||||
|
||||
icssg0_iep1: iep@2f000 {
|
||||
compatible = "ti,am654-icss-iep";
|
||||
reg = <0x2f000 0x1000>;
|
||||
clocks = <&icssg0_iepclk_mux>;
|
||||
};
|
||||
|
||||
icssg0_mii_rt: mii-rt@32000 {
|
||||
compatible = "ti,pruss-mii", "syscon";
|
||||
reg = <0x32000 0x100>;
|
||||
|
|
@ -1055,6 +1254,7 @@
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
bus_freq = <1000000>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -1105,6 +1305,18 @@
|
|||
};
|
||||
};
|
||||
|
||||
icssg1_iep0: iep@2e000 {
|
||||
compatible = "ti,am654-icss-iep";
|
||||
reg = <0x2e000 0x1000>;
|
||||
clocks = <&icssg1_iepclk_mux>;
|
||||
};
|
||||
|
||||
icssg1_iep1: iep@2f000 {
|
||||
compatible = "ti,am654-icss-iep";
|
||||
reg = <0x2f000 0x1000>;
|
||||
clocks = <&icssg1_iepclk_mux>;
|
||||
};
|
||||
|
||||
icssg1_mii_rt: mii-rt@32000 {
|
||||
compatible = "ti,pruss-mii", "syscon";
|
||||
reg = <0x32000 0x100>;
|
||||
|
|
@ -1196,6 +1408,7 @@
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
bus_freq = <1000000>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -1246,6 +1459,18 @@
|
|||
};
|
||||
};
|
||||
|
||||
icssg2_iep0: iep@2e000 {
|
||||
compatible = "ti,am654-icss-iep";
|
||||
reg = <0x2e000 0x1000>;
|
||||
clocks = <&icssg2_iepclk_mux>;
|
||||
};
|
||||
|
||||
icssg2_iep1: iep@2f000 {
|
||||
compatible = "ti,am654-icss-iep";
|
||||
reg = <0x2f000 0x1000>;
|
||||
clocks = <&icssg2_iepclk_mux>;
|
||||
};
|
||||
|
||||
icssg2_mii_rt: mii-rt@32000 {
|
||||
compatible = "ti,pruss-mii", "syscon";
|
||||
reg = <0x32000 0x100>;
|
||||
|
|
@ -1337,6 +1562,7 @@
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
bus_freq = <1000000>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -20,6 +20,24 @@
|
|||
};
|
||||
};
|
||||
|
||||
/* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */
|
||||
mcu_timerio_input: pinctrl@40f04200 {
|
||||
compatible = "pinctrl-single";
|
||||
reg = <0x0 0x40f04200 0x0 0x10>;
|
||||
#pinctrl-cells = <1>;
|
||||
pinctrl-single,register-width = <32>;
|
||||
pinctrl-single,function-mask = <0x00000101>;
|
||||
};
|
||||
|
||||
/* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */
|
||||
mcu_timerio_output: pinctrl@40f04280 {
|
||||
compatible = "pinctrl-single";
|
||||
reg = <0x0 0x40f04280 0x0 0x8>;
|
||||
#pinctrl-cells = <1>;
|
||||
pinctrl-single,register-width = <32>;
|
||||
pinctrl-single,function-mask = <0x00000003>;
|
||||
};
|
||||
|
||||
mcu_uart0: serial@40a00000 {
|
||||
compatible = "ti,am654-uart";
|
||||
reg = <0x00 0x40a00000 0x00 0x100>;
|
||||
|
|
@ -27,6 +45,7 @@
|
|||
clock-frequency = <96000000>;
|
||||
current-speed = <115200>;
|
||||
power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mcu_ram: sram@41c00000 {
|
||||
|
|
@ -46,6 +65,7 @@
|
|||
clock-names = "fck";
|
||||
clocks = <&k3_clks 114 1>;
|
||||
power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mcu_spi0: spi@40300000 {
|
||||
|
|
@ -56,6 +76,7 @@
|
|||
power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mcu_spi1: spi@40310000 {
|
||||
|
|
@ -66,6 +87,7 @@
|
|||
power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mcu_spi2: spi@40320000 {
|
||||
|
|
@ -76,6 +98,7 @@
|
|||
power-domains = <&k3_pds 144 TI_SCI_PD_EXCLUSIVE>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
tscadc0: tscadc@40200000 {
|
||||
|
|
@ -85,10 +108,11 @@
|
|||
clocks = <&k3_clks 0 2>;
|
||||
assigned-clocks = <&k3_clks 0 2>;
|
||||
assigned-clock-rates = <60000000>;
|
||||
clock-names = "adc_tsc_fck";
|
||||
clock-names = "fck";
|
||||
dmas = <&mcu_udmap 0x7100>,
|
||||
<&mcu_udmap 0x7101 >;
|
||||
dma-names = "fifo0", "fifo1";
|
||||
status = "disabled";
|
||||
|
||||
adc {
|
||||
#io-channel-cells = <1>;
|
||||
|
|
@ -103,10 +127,11 @@
|
|||
clocks = <&k3_clks 1 2>;
|
||||
assigned-clocks = <&k3_clks 1 2>;
|
||||
assigned-clock-rates = <60000000>;
|
||||
clock-names = "adc_tsc_fck";
|
||||
clock-names = "fck";
|
||||
dmas = <&mcu_udmap 0x7102>,
|
||||
<&mcu_udmap 0x7103>;
|
||||
dma-names = "fifo0", "fifo1";
|
||||
status = "disabled";
|
||||
|
||||
adc {
|
||||
#io-channel-cells = <1>;
|
||||
|
|
@ -114,8 +139,53 @@
|
|||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* The MCU domain timer interrupts are routed only to the ESM module,
|
||||
* and not currently available for Linux. The MCU domain timers are
|
||||
* of limited use without interrupts, and likely reserved by the ESM.
|
||||
*/
|
||||
mcu_timer0: timer@40400000 {
|
||||
compatible = "ti,am654-timer";
|
||||
reg = <0x00 0x40400000 0x00 0x400>;
|
||||
clocks = <&k3_clks 35 0>;
|
||||
clock-names = "fck";
|
||||
power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
|
||||
ti,timer-pwm;
|
||||
status = "reserved";
|
||||
};
|
||||
|
||||
mcu_timer1: timer@40410000 {
|
||||
compatible = "ti,am654-timer";
|
||||
reg = <0x00 0x40410000 0x00 0x400>;
|
||||
clocks = <&k3_clks 36 0>;
|
||||
clock-names = "fck";
|
||||
power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>;
|
||||
ti,timer-pwm;
|
||||
status = "reserved";
|
||||
};
|
||||
|
||||
mcu_timer2: timer@40420000 {
|
||||
compatible = "ti,am654-timer";
|
||||
reg = <0x00 0x40420000 0x00 0x400>;
|
||||
clocks = <&k3_clks 37 0>;
|
||||
clock-names = "fck";
|
||||
power-domains = <&k3_pds 37 TI_SCI_PD_EXCLUSIVE>;
|
||||
ti,timer-pwm;
|
||||
status = "reserved";
|
||||
};
|
||||
|
||||
mcu_timer3: timer@40430000 {
|
||||
compatible = "ti,am654-timer";
|
||||
reg = <0x00 0x40430000 0x00 0x400>;
|
||||
clocks = <&k3_clks 38 0>;
|
||||
clock-names = "fck";
|
||||
power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>;
|
||||
ti,timer-pwm;
|
||||
status = "reserved";
|
||||
};
|
||||
|
||||
mcu_navss: bus@28380000 {
|
||||
compatible = "simple-mfd";
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
|
||||
|
|
@ -129,8 +199,10 @@
|
|||
reg = <0x0 0x2b800000 0x0 0x400000>,
|
||||
<0x0 0x2b000000 0x0 0x400000>,
|
||||
<0x0 0x28590000 0x0 0x100>,
|
||||
<0x0 0x2a500000 0x0 0x40000>;
|
||||
reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
|
||||
<0x0 0x2a500000 0x0 0x40000>,
|
||||
<0x0 0x28440000 0x0 0x40000>;
|
||||
reg-names = "rt", "fifos", "proxy_gcfg",
|
||||
"proxy_target", "cfg";
|
||||
ti,num-rings = <286>;
|
||||
ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
|
||||
ti,sci = <&dmsc>;
|
||||
|
|
@ -159,7 +231,54 @@
|
|||
};
|
||||
};
|
||||
|
||||
fss: fss@47000000 {
|
||||
secure_proxy_mcu: mailbox@2a480000 {
|
||||
compatible = "ti,am654-secure-proxy";
|
||||
#mbox-cells = <1>;
|
||||
reg-names = "target_data", "rt", "scfg";
|
||||
reg = <0x0 0x2a480000 0x0 0x80000>,
|
||||
<0x0 0x2a380000 0x0 0x80000>,
|
||||
<0x0 0x2a400000 0x0 0x80000>;
|
||||
/*
|
||||
* Marked Disabled:
|
||||
* Node is incomplete as it is meant for bootloaders and
|
||||
* firmware on non-MPU processors
|
||||
*/
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
m_can0: can@40528000 {
|
||||
compatible = "bosch,m_can";
|
||||
reg = <0x0 0x40528000 0x0 0x400>,
|
||||
<0x0 0x40500000 0x0 0x4400>;
|
||||
reg-names = "m_can", "message_ram";
|
||||
power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
|
||||
clocks = <&k3_clks 102 5>, <&k3_clks 102 0>;
|
||||
clock-names = "hclk", "cclk";
|
||||
interrupt-parent = <&gic500>;
|
||||
interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "int0", "int1";
|
||||
bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
m_can1: can@40568000 {
|
||||
compatible = "bosch,m_can";
|
||||
reg = <0x0 0x40568000 0x0 0x400>,
|
||||
<0x0 0x40540000 0x0 0x4400>;
|
||||
reg-names = "m_can", "message_ram";
|
||||
power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
|
||||
clocks = <&k3_clks 103 5>, <&k3_clks 103 0>;
|
||||
clock-names = "hclk", "cclk";
|
||||
interrupt-parent = <&gic500>;
|
||||
interrupts = <GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "int0", "int1";
|
||||
bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
fss: bus@47000000 {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
|
@ -180,6 +299,7 @@
|
|||
power-domains = <&k3_pds 248 TI_SCI_PD_EXCLUSIVE>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ospi1: spi@47050000 {
|
||||
|
|
@ -194,6 +314,7 @@
|
|||
power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -243,6 +364,7 @@
|
|||
clocks = <&k3_clks 5 10>;
|
||||
clock-names = "fck";
|
||||
bus_freq = <1000000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
cpts@3d000 {
|
||||
|
|
|
|||
|
|
@ -12,7 +12,7 @@
|
|||
|
||||
mbox-names = "rx", "tx";
|
||||
|
||||
mboxes= <&secure_proxy_main 11>,
|
||||
mboxes = <&secure_proxy_main 11>,
|
||||
<&secure_proxy_main 13>;
|
||||
|
||||
reg-names = "debug_messages";
|
||||
|
|
@ -54,6 +54,7 @@
|
|||
clock-frequency = <48000000>;
|
||||
current-speed = <115200>;
|
||||
power-domains = <&k3_pds 150 TI_SCI_PD_EXCLUSIVE>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
wkup_i2c0: i2c@42120000 {
|
||||
|
|
@ -65,6 +66,7 @@
|
|||
clock-names = "fck";
|
||||
clocks = <&k3_clks 115 1>;
|
||||
power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
intr_wkup_gpio: interrupt-controller@42200000 {
|
||||
|
|
@ -100,8 +102,4 @@
|
|||
power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>;
|
||||
#thermal-sensor-cells = <1>;
|
||||
};
|
||||
|
||||
thermal_zones: thermal-zones {
|
||||
#include "k3-am654-industrial-thermal.dtsi"
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -8,9 +8,10 @@
|
|||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/pinctrl/k3.h>
|
||||
#include <dt-bindings/soc/ti,sci_pm_domain.h>
|
||||
|
||||
#include "k3-pinctrl.h"
|
||||
|
||||
/ {
|
||||
model = "Texas Instruments K3 AM654 SoC";
|
||||
compatible = "ti,am654";
|
||||
|
|
@ -18,21 +19,6 @@
|
|||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
aliases {
|
||||
serial0 = &wkup_uart0;
|
||||
serial1 = &mcu_uart0;
|
||||
serial2 = &main_uart0;
|
||||
serial3 = &main_uart1;
|
||||
serial4 = &main_uart2;
|
||||
i2c0 = &wkup_i2c0;
|
||||
i2c1 = &mcu_i2c0;
|
||||
i2c2 = &main_i2c0;
|
||||
i2c3 = &main_i2c1;
|
||||
i2c4 = &main_i2c2;
|
||||
i2c5 = &main_i2c3;
|
||||
ethernet0 = &cpsw_port1;
|
||||
};
|
||||
|
||||
chosen { };
|
||||
|
||||
firmware {
|
||||
|
|
@ -84,6 +70,7 @@
|
|||
<0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
|
||||
<0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
|
||||
<0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>,
|
||||
<0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A53 PERIPHBASE */
|
||||
<0x00 0x70000000 0x00 0x70000000 0x00 0x200000>,
|
||||
<0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>,
|
||||
<0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>;
|
||||
|
|
|
|||
|
|
@ -13,9 +13,22 @@
|
|||
compatible = "ti,am654-evm", "ti,am654";
|
||||
model = "Texas Instruments AM654 Base Board";
|
||||
|
||||
aliases {
|
||||
serial0 = &wkup_uart0;
|
||||
serial1 = &mcu_uart0;
|
||||
serial2 = &main_uart0;
|
||||
i2c0 = &wkup_i2c0;
|
||||
i2c1 = &mcu_i2c0;
|
||||
i2c2 = &main_i2c0;
|
||||
i2c3 = &main_i2c1;
|
||||
i2c4 = &main_i2c2;
|
||||
ethernet0 = &cpsw_port1;
|
||||
mmc0 = &sdhci0;
|
||||
mmc1 = &sdhci1;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:115200n8";
|
||||
bootargs = "earlycon=ns16550a,mmio32,0x02800000";
|
||||
};
|
||||
|
||||
memory@80000000 {
|
||||
|
|
@ -73,20 +86,20 @@
|
|||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&push_button_pins_default>;
|
||||
|
||||
sw5 {
|
||||
switch-5 {
|
||||
label = "GPIO Key USER1";
|
||||
linux,code = <BTN_0>;
|
||||
gpios = <&wkup_gpio0 24 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
sw6 {
|
||||
switch-6 {
|
||||
label = "GPIO Key USER2";
|
||||
linux,code = <BTN_1>;
|
||||
gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
evm_12v0: fixedregulator-evm12v0 {
|
||||
evm_12v0: regulator-0 {
|
||||
/* main supply */
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "evm_12v0";
|
||||
|
|
@ -96,7 +109,7 @@
|
|||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vcc3v3_io: fixedregulator-vcc3v3io {
|
||||
vcc3v3_io: regulator-1 {
|
||||
/* Output of TPS54334 */
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_io";
|
||||
|
|
@ -107,7 +120,7 @@
|
|||
vin-supply = <&evm_12v0>;
|
||||
};
|
||||
|
||||
vdd_mmc1_sd: fixedregulator-sd {
|
||||
vdd_mmc1_sd: regulator-2 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vdd_mmc1_sd";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
|
|
@ -117,24 +130,53 @@
|
|||
vin-supply = <&vcc3v3_io>;
|
||||
gpio = <&pca9554 4 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
vtt_supply: regulator-3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vtt";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ddr_vtt_pins_default>;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vcc3v3_io>;
|
||||
gpio = <&wkup_gpio0 28 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&wkup_pmx0 {
|
||||
wkup_i2c0_pins_default: wkup-i2c0-pins-default {
|
||||
wkup_uart0_pins_default: wkup-uart0-default-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM65X_WKUP_IOPAD(0x00a0, PIN_INPUT, 0) /* (AB1) WKUP_UART0_RXD */
|
||||
AM65X_WKUP_IOPAD(0x00a4, PIN_OUTPUT, 0) /* (AB5) WKUP_UART0_TXD */
|
||||
AM65X_WKUP_IOPAD(0x00c8, PIN_INPUT, 1) /* (AC2) WKUP_GPIO0_6.WKUP_UART0_CTSn */
|
||||
AM65X_WKUP_IOPAD(0x00cc, PIN_OUTPUT, 1) /* (AC1) WKUP_GPIO0_7.WKUP_UART0_RTSn */
|
||||
>;
|
||||
};
|
||||
|
||||
ddr_vtt_pins_default: ddr-vtt-default-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM65X_WKUP_IOPAD(0x0040, PIN_OUTPUT_PULLUP, 7) /* WKUP_GPIO0_28 */
|
||||
>;
|
||||
};
|
||||
|
||||
wkup_i2c0_pins_default: wkup-i2c0-default-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT, 0) /* (AC7) WKUP_I2C0_SCL */
|
||||
AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) WKUP_I2C0_SDA */
|
||||
>;
|
||||
};
|
||||
|
||||
push_button_pins_default: push-button-pins-default {
|
||||
push_button_pins_default: push-button-default-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM65X_WKUP_IOPAD(0x0030, PIN_INPUT, 7) /* (R5) WKUP_GPIO0_24 */
|
||||
AM65X_WKUP_IOPAD(0x003c, PIN_INPUT, 7) /* (P2) WKUP_GPIO0_27 */
|
||||
>;
|
||||
};
|
||||
|
||||
mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default {
|
||||
mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* (V1) MCU_OSPI0_CLK */
|
||||
AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* (U2) MCU_OSPI0_DQS */
|
||||
|
|
@ -150,13 +192,22 @@
|
|||
>;
|
||||
};
|
||||
|
||||
wkup_pca554_default: wkup-pca554-default {
|
||||
wkup_pca554_default: wkup-pca554-default-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */
|
||||
>;
|
||||
};
|
||||
|
||||
mcu_cpsw_pins_default: mcu-cpsw-pins-default {
|
||||
mcu_uart0_pins_default: mcu-uart0-default-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 4) /* (P4) MCU_OSPI1_D1.MCU_UART0_RXD */
|
||||
AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4) /* (P5) MCU_OSPI1_D2.MCU_UART0_TXD */
|
||||
AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 4) /* (P1) MCU_OSPI1_D3.MCU_UART0_CTSn */
|
||||
AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 4) /* (N3) MCU_OSPI1_CSn1.MCU_UART0_RTSn */
|
||||
>;
|
||||
};
|
||||
|
||||
mcu_cpsw_pins_default: mcu-cpsw-default-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* (N4) MCU_RGMII1_TX_CTL */
|
||||
AM65X_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* (N5) MCU_RGMII1_RX_CTL */
|
||||
|
|
@ -173,16 +224,23 @@
|
|||
>;
|
||||
};
|
||||
|
||||
mcu_mdio_pins_default: mcu-mdio1-pins-default {
|
||||
mcu_mdio_pins_default: mcu-mdio1-default-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM65X_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */
|
||||
AM65X_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
|
||||
>;
|
||||
};
|
||||
|
||||
mcu_i2c0_pins_default: mcu-i2c0-default-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM65X_WKUP_IOPAD(0x00e8, PIN_INPUT, 0) /* (AD8) MCU_I2C0_SCL */
|
||||
AM65X_WKUP_IOPAD(0x00ec, PIN_INPUT, 0) /* (AD7) MCU_I2C0_SDA */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&main_pmx0 {
|
||||
main_uart0_pins_default: main-uart0-pins-default {
|
||||
main_uart0_pins_default: main-uart0-default-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM65X_IOPAD(0x01e4, PIN_INPUT, 0) /* (AF11) UART0_RXD */
|
||||
AM65X_IOPAD(0x01e8, PIN_OUTPUT, 0) /* (AE11) UART0_TXD */
|
||||
|
|
@ -191,14 +249,14 @@
|
|||
>;
|
||||
};
|
||||
|
||||
main_i2c2_pins_default: main-i2c2-pins-default {
|
||||
main_i2c2_pins_default: main-i2c2-default-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM65X_IOPAD(0x0074, PIN_INPUT, 5) /* (T27) GPMC0_CSn3.I2C2_SCL */
|
||||
AM65X_IOPAD(0x0070, PIN_INPUT, 5) /* (R25) GPMC0_CSn2.I2C2_SDA */
|
||||
>;
|
||||
};
|
||||
|
||||
main_spi0_pins_default: main-spi0-pins-default {
|
||||
main_spi0_pins_default: main-spi0-default-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM65X_IOPAD(0x01c4, PIN_INPUT, 0) /* (AH13) SPI0_CLK */
|
||||
AM65X_IOPAD(0x01c8, PIN_INPUT, 0) /* (AE13) SPI0_D0 */
|
||||
|
|
@ -207,7 +265,7 @@
|
|||
>;
|
||||
};
|
||||
|
||||
main_mmc0_pins_default: main-mmc0-pins-default {
|
||||
main_mmc0_pins_default: main-mmc0-default-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0) /* (B25) MMC0_CLK */
|
||||
AM65X_IOPAD(0x01ac, PIN_INPUT_PULLUP, 0) /* (B27) MMC0_CMD */
|
||||
|
|
@ -224,7 +282,7 @@
|
|||
>;
|
||||
};
|
||||
|
||||
main_mmc1_pins_default: main-mmc1-pins-default {
|
||||
main_mmc1_pins_default: main-mmc1-default-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */
|
||||
AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */
|
||||
|
|
@ -237,7 +295,7 @@
|
|||
>;
|
||||
};
|
||||
|
||||
usb1_pins_default: usb1-pins-default {
|
||||
usb1_pins_default: usb1-default-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */
|
||||
>;
|
||||
|
|
@ -245,21 +303,21 @@
|
|||
};
|
||||
|
||||
&main_pmx1 {
|
||||
main_i2c0_pins_default: main-i2c0-pins-default {
|
||||
main_i2c0_pins_default: main-i2c0-default-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM65X_IOPAD(0x0000, PIN_INPUT, 0) /* (D20) I2C0_SCL */
|
||||
AM65X_IOPAD(0x0004, PIN_INPUT, 0) /* (C21) I2C0_SDA */
|
||||
>;
|
||||
};
|
||||
|
||||
main_i2c1_pins_default: main-i2c1-pins-default {
|
||||
main_i2c1_pins_default: main-i2c1-default-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM65X_IOPAD(0x0008, PIN_INPUT, 0) /* (B21) I2C1_SCL */
|
||||
AM65X_IOPAD(0x000c, PIN_INPUT, 0) /* (E21) I2C1_SDA */
|
||||
>;
|
||||
};
|
||||
|
||||
ecap0_pins_default: ecap0-pins-default {
|
||||
ecap0_pins_default: ecap0-default-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM65X_IOPAD(0x0010, PIN_INPUT, 0) /* (D21) ECAP0_IN_APWM_OUT */
|
||||
>;
|
||||
|
|
@ -269,19 +327,55 @@
|
|||
&wkup_uart0 {
|
||||
/* Wakeup UART is used by System firmware */
|
||||
status = "reserved";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wkup_uart0_pins_default>;
|
||||
};
|
||||
|
||||
&mcu_uart0 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mcu_uart0_pins_default>;
|
||||
};
|
||||
|
||||
&main_uart0 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&main_uart0_pins_default>;
|
||||
power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
|
||||
};
|
||||
|
||||
&wkup_i2c0 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wkup_i2c0_pins_default>;
|
||||
clock-frequency = <400000>;
|
||||
|
||||
eeprom@50 {
|
||||
/* AT24CM01 */
|
||||
compatible = "atmel,24c1024";
|
||||
reg = <0x50>;
|
||||
};
|
||||
|
||||
vdd_mpu: regulator@60 {
|
||||
compatible = "ti,tps62363";
|
||||
reg = <0x60>;
|
||||
regulator-name = "VDD_MPU";
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1770000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
ti,vsel0-state-high;
|
||||
ti,vsel1-state-high;
|
||||
ti,enable-vout-discharge;
|
||||
};
|
||||
|
||||
gpio@38 {
|
||||
compatible = "nxp,pca9554";
|
||||
reg = <0x38>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
pca9554: gpio@39 {
|
||||
compatible = "nxp,pca9554";
|
||||
reg = <0x39>;
|
||||
|
|
@ -296,7 +390,15 @@
|
|||
};
|
||||
};
|
||||
|
||||
&mcu_i2c0 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mcu_i2c0_pins_default>;
|
||||
clock-frequency = <400000>;
|
||||
};
|
||||
|
||||
&main_i2c0 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&main_i2c0_pins_default>;
|
||||
clock-frequency = <400000>;
|
||||
|
|
@ -310,37 +412,39 @@
|
|||
};
|
||||
|
||||
&main_i2c1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&main_i2c1_pins_default>;
|
||||
clock-frequency = <400000>;
|
||||
};
|
||||
|
||||
&main_i2c2 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&main_i2c2_pins_default>;
|
||||
clock-frequency = <400000>;
|
||||
};
|
||||
|
||||
&ecap0 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ecap0_pins_default>;
|
||||
};
|
||||
|
||||
&main_spi0 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&main_spi0_pins_default>;
|
||||
#address-cells = <1>;
|
||||
#size-cells= <0>;
|
||||
#size-cells = <0>;
|
||||
ti,pindir-d0-out-d1-in;
|
||||
|
||||
flash@0{
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0x0>;
|
||||
spi-tx-bus-width = <1>;
|
||||
spi-rx-bus-width = <1>;
|
||||
spi-max-frequency = <48000000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells= <1>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -381,12 +485,14 @@
|
|||
};
|
||||
|
||||
&tscadc0 {
|
||||
status = "okay";
|
||||
adc {
|
||||
ti,adc-channels = <0 1 2 3 4 5 6 7>;
|
||||
};
|
||||
};
|
||||
|
||||
&tscadc1 {
|
||||
status = "okay";
|
||||
adc {
|
||||
ti,adc-channels = <0 1 2 3 4 5 6 7>;
|
||||
};
|
||||
|
|
@ -400,23 +506,8 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
&pcie0_rc {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&pcie0_ep {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&pcie1_rc {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&pcie1_ep {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&mailbox0_cluster0 {
|
||||
status = "okay";
|
||||
interrupts = <436>;
|
||||
|
||||
mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
|
||||
|
|
@ -426,6 +517,7 @@
|
|||
};
|
||||
|
||||
&mailbox0_cluster1 {
|
||||
status = "okay";
|
||||
interrupts = <432>;
|
||||
|
||||
mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
|
||||
|
|
@ -434,63 +526,24 @@
|
|||
};
|
||||
};
|
||||
|
||||
&mailbox0_cluster2 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&mailbox0_cluster3 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&mailbox0_cluster4 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&mailbox0_cluster5 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&mailbox0_cluster6 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&mailbox0_cluster7 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&mailbox0_cluster8 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&mailbox0_cluster9 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&mailbox0_cluster10 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&mailbox0_cluster11 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&mcu_r5fss0_core0 {
|
||||
memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
|
||||
<&mcu_r5fss0_core0_memory_region>;
|
||||
mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
|
||||
mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
|
||||
};
|
||||
|
||||
&mcu_r5fss0_core1 {
|
||||
memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
|
||||
<&mcu_r5fss0_core1_memory_region>;
|
||||
mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>;
|
||||
mboxes = <&mailbox0_cluster1>, <&mbox_mcu_r5fss0_core1>;
|
||||
};
|
||||
|
||||
&ospi0 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
|
||||
|
||||
flash@0{
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0x0>;
|
||||
spi-tx-bus-width = <8>;
|
||||
|
|
@ -501,17 +554,65 @@
|
|||
cdns,tchsh-ns = <60>;
|
||||
cdns,tslch-ns = <60>;
|
||||
cdns,read-delay = <0>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "ospi.tiboot3";
|
||||
reg = <0x0 0x80000>;
|
||||
};
|
||||
|
||||
partition@80000 {
|
||||
label = "ospi.tispl";
|
||||
reg = <0x80000 0x200000>;
|
||||
};
|
||||
|
||||
partition@280000 {
|
||||
label = "ospi.u-boot";
|
||||
reg = <0x280000 0x400000>;
|
||||
};
|
||||
|
||||
partition@680000 {
|
||||
label = "ospi.env";
|
||||
reg = <0x680000 0x20000>;
|
||||
};
|
||||
|
||||
partition@6a0000 {
|
||||
label = "ospi.env.backup";
|
||||
reg = <0x6a0000 0x20000>;
|
||||
};
|
||||
|
||||
partition@6c0000 {
|
||||
label = "ospi.sysfw";
|
||||
reg = <0x6c0000 0x100000>;
|
||||
};
|
||||
|
||||
partition@800000 {
|
||||
label = "ospi.rootfs";
|
||||
reg = <0x800000 0x37c0000>;
|
||||
};
|
||||
|
||||
partition@3fe0000 {
|
||||
label = "ospi.phypattern";
|
||||
reg = <0x3fe0000 0x20000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mcu_cpsw {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
|
||||
pinctrl-0 = <&mcu_cpsw_pins_default>;
|
||||
};
|
||||
|
||||
&davinci_mdio {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mcu_mdio_pins_default>;
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
|
||||
|
|
@ -524,30 +625,6 @@
|
|||
phy-handle = <&phy0>;
|
||||
};
|
||||
|
||||
&mcasp0 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&mcasp1 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&mcasp2 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&dss {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&icssg0_mdio {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&icssg1_mdio {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&icssg2_mdio {
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -93,6 +93,7 @@
|
|||
L2_0: l2-cache0 {
|
||||
compatible = "cache";
|
||||
cache-level = <2>;
|
||||
cache-unified;
|
||||
cache-size = <0x80000>;
|
||||
cache-line-size = <64>;
|
||||
cache-sets = <512>;
|
||||
|
|
@ -102,6 +103,7 @@
|
|||
L2_1: l2-cache1 {
|
||||
compatible = "cache";
|
||||
cache-level = <2>;
|
||||
cache-unified;
|
||||
cache-size = <0x80000>;
|
||||
cache-line-size = <64>;
|
||||
cache-sets = <512>;
|
||||
|
|
@ -111,5 +113,10 @@
|
|||
msmc_l3: l3-cache0 {
|
||||
compatible = "cache";
|
||||
cache-level = <3>;
|
||||
cache-unified;
|
||||
};
|
||||
|
||||
thermal_zones: thermal-zones {
|
||||
#include "k3-am654-industrial-thermal.dtsi"
|
||||
};
|
||||
};
|
||||
|
|
|
|||
Loading…
Reference in a new issue