mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-28 07:31:15 +00:00
xpedite1k: Sync organization of board config with other X-ES boards
This change should have no functional effect Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Stefan Roese <sr@denx.de>
This commit is contained in:
Peter Tyser
Stefan Roese
parent
c4ae1a0257
commit
4cdad5f43a
1 changed files with 117 additions and 106 deletions
|
|
@ -38,26 +38,40 @@
|
|||
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
|
||||
#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
|
||||
|
||||
/* POST support */
|
||||
#define CONFIG_POST (CONFIG_SYS_POST_RTC | \
|
||||
CONFIG_SYS_POST_I2C)
|
||||
/*
|
||||
* DDR config
|
||||
*/
|
||||
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */
|
||||
#define SPD_EEPROM_ADDRESS {0x54} /* SPD i2c spd addresses */
|
||||
#define CONFIG_VERY_BIG_RAM 1
|
||||
|
||||
/*
|
||||
* Base addresses -- Note these are effective addresses where the
|
||||
* actual resources get mapped (not physical addresses)
|
||||
*/
|
||||
#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */
|
||||
#define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of FLASH */
|
||||
|
||||
#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
|
||||
#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */
|
||||
#define CONFIG_SYS_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */
|
||||
#define CONFIG_SYS_ISRAM_BASE 0xc0000000 /* internal SRAM */
|
||||
#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */
|
||||
|
||||
#define CONFIG_SYS_SDRAM_BASE 0x00000000
|
||||
#define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of FLASH */
|
||||
#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
|
||||
#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */
|
||||
#define CONFIG_SYS_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */
|
||||
#define CONFIG_SYS_ISRAM_BASE 0xc0000000 /* internal SRAM */
|
||||
#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */
|
||||
#define CONFIG_SYS_NVRAM_BASE_ADDR (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000)
|
||||
#define CONFIG_SYS_GPIO_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000700)
|
||||
|
||||
/*
|
||||
* Diagnostics
|
||||
*/
|
||||
#define CONFIG_SYS_MEMTEST_START 0x0400000
|
||||
#define CONFIG_SYS_MEMTEST_END 0x0C00000
|
||||
|
||||
/* POST support */
|
||||
#define CONFIG_POST (CONFIG_SYS_POST_RTC | \
|
||||
CONFIG_SYS_POST_I2C)
|
||||
|
||||
/*
|
||||
* LED support
|
||||
*/
|
||||
#define USR_LED0 0x00000080
|
||||
#define USR_LED1 0x00000100
|
||||
#define USR_LED2 0x00000200
|
||||
|
|
@ -78,13 +92,14 @@ extern void out32(unsigned int, unsigned long);
|
|||
#define LED3_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED3))
|
||||
#endif
|
||||
|
||||
/* Initial RAM & stack pointer (placed in internal SRAM) */
|
||||
/*
|
||||
* Use internal SRAM for initial stack
|
||||
*/
|
||||
#define CONFIG_SYS_TEMP_STACK_OCM 1
|
||||
#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE
|
||||
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */
|
||||
#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */
|
||||
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */
|
||||
|
||||
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
|
||||
#define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
|
||||
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_POST_WORD_ADDR
|
||||
|
|
@ -92,19 +107,17 @@ extern void out32(unsigned int, unsigned long);
|
|||
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
|
||||
#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc */
|
||||
|
||||
/* Serial Port */
|
||||
#undef CONFIG_SERIAL_SOFTWARE_FIFO
|
||||
#define CONFIG_BAUDRATE 9600
|
||||
/*
|
||||
* Serial Port
|
||||
*/
|
||||
#define CONFIG_SYS_BAUDRATE_TABLE \
|
||||
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400}
|
||||
|
||||
/* RTC: STMicro M41T00 */
|
||||
#define CONFIG_RTC_M41T11 1
|
||||
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
|
||||
#define CONFIG_SYS_M41T11_BASE_YEAR 2000
|
||||
#define CONFIG_BAUDRATE 9600
|
||||
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
||||
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
||||
|
||||
/*
|
||||
* FLASH related
|
||||
* NOR flash configuration
|
||||
*/
|
||||
#define CONFIG_SYS_MAX_FLASH_BANKS 3
|
||||
#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE, 0xf0000000, 0xf4000000 }
|
||||
|
|
@ -118,97 +131,24 @@ extern void out32(unsigned int, unsigned long);
|
|||
#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
|
||||
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
|
||||
|
||||
/* DDR SDRAM */
|
||||
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */
|
||||
#define SPD_EEPROM_ADDRESS {0x54} /* SPD i2c spd addresses */
|
||||
#define CONFIG_VERY_BIG_RAM 1
|
||||
|
||||
/* I2C */
|
||||
/*
|
||||
* I2C
|
||||
*/
|
||||
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
|
||||
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
|
||||
#define CONFIG_SYS_I2C_SLAVE 0x7f
|
||||
#define CONFIG_SYS_I2C_NOPROBES {0x55,0x56,0x57,0x58,0x59,0x5a,0x5b,0x5c,0x69}
|
||||
|
||||
/*
|
||||
* Environment Configuration
|
||||
*/
|
||||
#define CONFIG_ENV_IS_IN_FLASH 1
|
||||
#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128k (one sector) for env */
|
||||
#define CONFIG_ENV_SIZE 0x8000
|
||||
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - (256 * 1024))
|
||||
|
||||
/* EEPROM */
|
||||
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
|
||||
/* I2C EEPROM */
|
||||
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
|
||||
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
|
||||
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
|
||||
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
|
||||
|
||||
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
||||
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
||||
|
||||
#define CONFIG_PPC4xx_EMAC
|
||||
#define CONFIG_MII 1 /* MII PHY management */
|
||||
#define CONFIG_PHY_ADDR 4 /* PHY address phy0 not populated */
|
||||
#define CONFIG_PHY2_ADDR 4 /* PHY address phy2 */
|
||||
#define CONFIG_PHY3_ADDR 8 /* PHY address phy3 */
|
||||
#define CONFIG_NET_MULTI 1
|
||||
#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
|
||||
#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
|
||||
#define CONFIG_SYS_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
|
||||
|
||||
#define CONFIG_HAS_ETH2 1 /* add support for "eth2addr" */
|
||||
#define CONFIG_HAS_ETH3 1 /* add support for "eth3addr" */
|
||||
|
||||
/* BOOTP options */
|
||||
#define CONFIG_BOOTP_BOOTFILESIZE
|
||||
#define CONFIG_BOOTP_BOOTPATH
|
||||
#define CONFIG_BOOTP_GATEWAY
|
||||
#define CONFIG_BOOTP_HOSTNAME
|
||||
|
||||
/*
|
||||
* Command line configuration
|
||||
*/
|
||||
#include <config_cmd_default.h>
|
||||
|
||||
#define CONFIG_CMD_ASKENV
|
||||
#define CONFIG_CMD_DATE
|
||||
#define CONFIG_CMD_DHCP
|
||||
#define CONFIG_CMD_EEPROM
|
||||
#define CONFIG_CMD_ELF
|
||||
#define CONFIG_CMD_SAVEENV
|
||||
#define CONFIG_CMD_FLASH
|
||||
#define CONFIG_CMD_I2C
|
||||
#define CONFIG_CMD_IRQ
|
||||
#define CONFIG_CMD_JFFS2
|
||||
#define CONFIG_CMD_MII
|
||||
#define CONFIG_CMD_NET
|
||||
#define CONFIG_CMD_PCI
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_SNTP
|
||||
|
||||
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
||||
|
||||
/*
|
||||
* Miscellaneous configurable options
|
||||
*/
|
||||
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
||||
#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
|
||||
#if defined(CONFIG_CMD_KGDB)
|
||||
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||
#else
|
||||
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
#endif
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
|
||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
||||
|
||||
#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
|
||||
#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
|
||||
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
|
||||
#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
|
||||
|
||||
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
|
||||
/* I2C RTC: STMicro M41T00 */
|
||||
#define CONFIG_RTC_M41T11 1
|
||||
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
|
||||
#define CONFIG_SYS_M41T11_BASE_YEAR 2000
|
||||
|
||||
/*
|
||||
* PCI
|
||||
|
|
@ -225,6 +165,66 @@ extern void out32(unsigned int, unsigned long);
|
|||
#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
|
||||
#define CONFIG_SYS_PCI_FORCE_PCI_CONV /* Force PCI Conventional Mode */
|
||||
|
||||
/*
|
||||
* Networking options
|
||||
*/
|
||||
#define CONFIG_PPC4xx_EMAC
|
||||
#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
|
||||
#define CONFIG_NET_MULTI 1
|
||||
#define CONFIG_MII 1 /* MII PHY management */
|
||||
#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
|
||||
#define CONFIG_SYS_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
|
||||
#define CONFIG_ETHPRIME "ppc_4xx_eth2"
|
||||
#define CONFIG_PHY_ADDR 4 /* PHY address phy0 not populated */
|
||||
#define CONFIG_PHY2_ADDR 4 /* PHY address phy2 */
|
||||
#define CONFIG_HAS_ETH2 1 /* add support for "eth2addr" */
|
||||
#define CONFIG_PHY3_ADDR 8 /* PHY address phy3 */
|
||||
#define CONFIG_HAS_ETH3 1 /* add support for "eth3addr" */
|
||||
|
||||
/* BOOTP options */
|
||||
#define CONFIG_BOOTP_BOOTFILESIZE
|
||||
#define CONFIG_BOOTP_BOOTPATH
|
||||
#define CONFIG_BOOTP_GATEWAY
|
||||
#define CONFIG_BOOTP_HOSTNAME
|
||||
|
||||
/*
|
||||
* Command configuration
|
||||
*/
|
||||
#include <config_cmd_default.h>
|
||||
|
||||
#define CONFIG_CMD_ASKENV
|
||||
#define CONFIG_CMD_DATE
|
||||
#define CONFIG_CMD_DHCP
|
||||
#define CONFIG_CMD_EEPROM
|
||||
#define CONFIG_CMD_ELF
|
||||
#define CONFIG_CMD_FLASH
|
||||
#define CONFIG_CMD_I2C
|
||||
#define CONFIG_CMD_IRQ
|
||||
#define CONFIG_CMD_JFFS2
|
||||
#define CONFIG_CMD_MII
|
||||
#define CONFIG_CMD_NET
|
||||
#define CONFIG_CMD_PCI
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_SAVEENV
|
||||
#define CONFIG_CMD_SNTP
|
||||
|
||||
/*
|
||||
* Miscellaneous configurable options
|
||||
*/
|
||||
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
|
||||
#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
|
||||
#if defined(CONFIG_CMD_KGDB)
|
||||
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||
#else
|
||||
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
#endif
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
|
||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
||||
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
|
||||
#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
|
||||
|
||||
/*
|
||||
* For booting Linux, the board info and command line data
|
||||
* have to be in the first 8 MB of memory, since this is
|
||||
|
|
@ -233,16 +233,27 @@ extern void out32(unsigned int, unsigned long);
|
|||
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
||||
|
||||
/*
|
||||
* Internal Definitions
|
||||
* Boot Flags
|
||||
*/
|
||||
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
||||
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
||||
|
||||
/*
|
||||
* KGDB configuration
|
||||
*/
|
||||
#if defined(CONFIG_CMD_KGDB)
|
||||
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
|
||||
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Environment Configuration
|
||||
*/
|
||||
#define CONFIG_ENV_IS_IN_FLASH 1
|
||||
#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128k (one sector) for env */
|
||||
#define CONFIG_ENV_SIZE 0x8000
|
||||
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - (256 * 1024))
|
||||
|
||||
/*
|
||||
* Flash memory map:
|
||||
* fff80000 - ffffffff U-Boot (512 KB)
|
||||
|
|
|
|||
Loading…
Reference in a new issue