soft_i2c: Add CFG_I2C_INIT_BOARD option

This patch adds the option for a boardspecific
I2C deblocking mechanism for the soft i2c driver.

Signed-off-by: Heiko Schocher <hs@denx.de>
This commit is contained in:
Heiko Schocher 2008-10-15 09:38:38 +02:00 committed by Wolfgang Denk
parent e5e4edd9f1
commit 4ca107effe

View file

@ -75,13 +75,16 @@ static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = 0;
/*-----------------------------------------------------------------------
* Local functions
*/
#if !defined(CFG_I2C_INIT_BOARD)
static void send_reset (void);
#endif
static void send_start (void);
static void send_stop (void);
static void send_ack (int);
static int write_byte (uchar byte);
static uchar read_byte (int);
#if !defined(CFG_I2C_INIT_BOARD)
/*-----------------------------------------------------------------------
* Send a reset sequence consisting of 9 clocks with the data signal high
* to clock any confused device back into an idle state. Also send a
@ -109,6 +112,7 @@ static void send_reset(void)
send_stop();
I2C_TRISTATE;
}
#endif
/*-----------------------------------------------------------------------
* START: High -> Low on SDA while SCL is High
@ -280,6 +284,12 @@ static uchar read_byte(int ack)
*/
void i2c_init (int speed, int slaveaddr)
{
#if defined(CFG_I2C_INIT_BOARD)
/* call board specific i2c bus reset routine before accessing the */
/* environment, which might be in a chip on that bus. For details */
/* about this problem see doc/I2C_Edge_Conditions. */
i2c_init_board();
#else
/*
* WARNING: Do NOT save speed in a static variable: if the
* I2C routines are called before RAM is initialized (to read
@ -287,6 +297,7 @@ void i2c_init (int speed, int slaveaddr)
* system will crash.
*/
send_reset ();
#endif
}
/*-----------------------------------------------------------------------