From 443d4d15d7bd2f2bd5a58a6a6dd8da2a8dd23de4 Mon Sep 17 00:00:00 2001
From: Eric Nelson <eric.nelson@boundarydevices.com>
Date: Thu, 2 Oct 2014 12:16:32 -0700
Subject: [PATCH] nitrogen6x: display: add qvga panel

Add support for a 1/4 VGA panel with a 24-bit RGB interface.
No auto-detection is enabled, so you must configure the 'panel'
environment variable to use this display:

        U-Boot > setenv panel qvga
        U-Boot > saveenv && reset

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
---
 board/boundary/nitrogen6x/nitrogen6x.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c
index 39e8013480..5e0461c54c 100644
--- a/board/boundary/nitrogen6x/nitrogen6x.c
+++ b/board/boundary/nitrogen6x/nitrogen6x.c
@@ -593,6 +593,26 @@ struct display_info_t const displays[] = {{
 		.vsync_len      = 10,
 		.sync           = 0,
 		.vmode          = FB_VMODE_NONINTERLACED
+} }, {
+	.bus	= 0,
+	.addr	= 0,
+	.pixfmt	= IPU_PIX_FMT_RGB24,
+	.detect	= NULL,
+	.enable	= enable_rgb,
+	.mode	= {
+		.name           = "qvga",
+		.refresh        = 60,
+		.xres           = 320,
+		.yres           = 240,
+		.pixclock       = 37037,
+		.left_margin    = 38,
+		.right_margin   = 37,
+		.upper_margin   = 16,
+		.lower_margin   = 15,
+		.hsync_len      = 30,
+		.vsync_len      = 3,
+		.sync           = 0,
+		.vmode          = FB_VMODE_NONINTERLACED
 } } };
 size_t display_count = ARRAY_SIZE(displays);