mmc: sdhci: Add support for sdhci-caps-mask

Add Support for masking some bits in the capabilities
register of a host controller.

Also remove the redundant readl() into caps1.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Faiz Abbas 2019-06-11 00:43:34 +05:30 committed by Tom Rini
parent 55a1a09b2a
commit 3d296365e4

View file

@ -8,6 +8,7 @@
*/
#include <common.h>
#include <dm.h>
#include <errno.h>
#include <malloc.h>
#include <mmc.h>
@ -681,8 +682,18 @@ int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host,
u32 f_max, u32 f_min)
{
u32 caps, caps_1 = 0;
#if CONFIG_IS_ENABLED(DM_MMC)
u32 mask[2] = {0};
int ret;
ret = dev_read_u32_array(host->mmc->dev, "sdhci-caps-mask",
mask, 2);
if (ret && ret != -1)
return ret;
caps = ~mask[1] & sdhci_readl(host, SDHCI_CAPABILITIES);
#else
caps = sdhci_readl(host, SDHCI_CAPABILITIES);
#endif
#ifdef CONFIG_MMC_SDHCI_SDMA
if (!(caps & SDHCI_CAN_DO_SDMA)) {
@ -722,7 +733,11 @@ int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host,
/* Check whether the clock multiplier is supported or not */
if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) {
#if CONFIG_IS_ENABLED(DM_MMC)
caps_1 = ~mask[0] & sdhci_readl(host, SDHCI_CAPABILITIES_1);
#else
caps_1 = sdhci_readl(host, SDHCI_CAPABILITIES_1);
#endif
host->clk_mul = (caps_1 & SDHCI_CLOCK_MUL_MASK) >>
SDHCI_CLOCK_MUL_SHIFT;
}
@ -779,9 +794,6 @@ int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host,
cfg->host_caps &= ~MMC_MODE_HS_52MHz;
}
if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300)
caps_1 = sdhci_readl(host, SDHCI_CAPABILITIES_1);
if (!(cfg->voltages & MMC_VDD_165_195) ||
(host->quirks & SDHCI_QUIRK_NO_1_8_V))
caps_1 &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 |