sh: sh_eth: Add support SH7724

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
This commit is contained in:
Nobuhiro Iwamatsu 2011-11-14 16:56:59 +09:00 committed by Nobuhiro Iwamatsu
parent e37ae40e9d
commit 3bb4cc312d
2 changed files with 61 additions and 24 deletions

View file

@ -1,8 +1,8 @@
/*
* sh_eth.c - Driver for Renesas SH7763's ethernet controler.
*
* Copyright (C) 2008 Renesas Solutions Corp.
* Copyright (c) 2008 Nobuhiro Iwamatsu
* Copyright (C) 2008, 2011 Renesas Solutions Corp.
* Copyright (c) 2008, 2011 Nobuhiro Iwamatsu
* Copyright (c) 2007 Carlos Munoz <carlos@kenati.com>
*
* This program is free software; you can redistribute it and/or modify
@ -371,7 +371,7 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd)
outl(0, TFTR(port));
outl((FIFO_SIZE_T | FIFO_SIZE_R), FDR(port));
outl(RMCR_RST, RMCR(port));
#ifndef CONFIG_CPU_SH7757
#if !defined(CONFIG_CPU_SH7757) && !defined(CONFIG_CPU_SH7724)
outl(0, RPADIR(port));
#endif
outl((FIFO_F_D_RFF | FIFO_F_D_RFD), FCFTR(port));
@ -393,16 +393,19 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd)
outl(val, MALR(port));
outl(RFLR_RFL_MIN, RFLR(port));
#ifndef CONFIG_CPU_SH7757
#if !defined(CONFIG_CPU_SH7757) && !defined(CONFIG_CPU_SH7724)
outl(0, PIPR(port));
#endif
#if !defined(CONFIG_CPU_SH7724)
outl(APR_AP, APR(port));
outl(MPR_MP, MPR(port));
#ifdef CONFIG_CPU_SH7757
outl(TPAUSER_UNLIMITED, TPAUSER(port));
#else
outl(TPAUSER_TPAUSE, TPAUSER(port));
#endif
#if defined(CONFIG_CPU_SH7763)
outl(TPAUSER_TPAUSE, TPAUSER(port));
#elif defined(CONFIG_CPU_SH7757)
outl(TPAUSER_UNLIMITED, TPAUSER(port));
#endif
/* Configure phy */
ret = sh_eth_phy_config(eth);
if (ret) {
@ -412,33 +415,34 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd)
phy = port_info->phydev;
phy_startup(phy);
val = 0;
/* Set the transfer speed */
#ifdef CONFIG_CPU_SH7763
if (phy->speed == 100) {
printf(SHETHER_NAME ": 100Base/");
#ifdef CONFIG_CPU_SH7763
outl(GECMR_100B, GECMR(port));
#elif defined(CONFIG_CPU_SH7757)
outl(1, RTRATE(port));
#elif defined(CONFIG_CPU_SH7724)
val = ECMR_RTM;
#endif
} else if (phy->speed == 10) {
printf(SHETHER_NAME ": 10Base/");
#ifdef CONFIG_CPU_SH7763
outl(GECMR_10B, GECMR(port));
}
#endif
#if defined(CONFIG_CPU_SH7757)
if (phy->speed == 100) {
printf("100Base/");
outl(1, RTRATE(port));
} else if (phy->speed == 10) {
printf("10Base/");
#elif defined(CONFIG_CPU_SH7757)
outl(0, RTRATE(port));
}
#endif
}
/* Check if full duplex mode is supported by the phy */
if (phy->duplex) {
printf("Full\n");
outl((ECMR_CHG_DM|ECMR_RE|ECMR_TE|ECMR_DM), ECMR(port));
outl(val | (ECMR_CHG_DM|ECMR_RE|ECMR_TE|ECMR_DM), ECMR(port));
} else {
printf("Half\n");
outl((ECMR_CHG_DM|ECMR_RE|ECMR_TE), ECMR(port));
outl(val | (ECMR_CHG_DM|ECMR_RE|ECMR_TE), ECMR(port));
}
return ret;

View file

@ -1,8 +1,8 @@
/*
* sh_eth.h - Driver for Renesas SuperH ethernet controler.
*
* Copyright (C) 2008 Renesas Solutions Corp.
* Copyright (c) 2008 Nobuhiro Iwamatsu
* Copyright (C) 2008, 2011 Renesas Solutions Corp.
* Copyright (c) 2008, 2011 Nobuhiro Iwamatsu
* Copyright (c) 2007 Carlos Munoz <carlos@kenati.com>
*
* This program is free software; you can redistribute it and/or modify
@ -162,6 +162,32 @@ struct sh_eth_dev {
#define MAHR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x01c0)
#define MALR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x01c8)
#define RTRATE(port) (BASE_IO_ADDR + 0x800 * (port) + 0x01fc)
#elif defined(CONFIG_CPU_SH7724)
#define BASE_IO_ADDR 0xA4600000
#define TDLAR(port) (BASE_IO_ADDR + 0x0018)
#define RDLAR(port) (BASE_IO_ADDR + 0x0020)
#define EDMR(port) (BASE_IO_ADDR + 0x0000)
#define EDTRR(port) (BASE_IO_ADDR + 0x0008)
#define EDRRR(port) (BASE_IO_ADDR + 0x0010)
#define EESR(port) (BASE_IO_ADDR + 0x0028)
#define EESIPR(port) (BASE_IO_ADDR + 0x0030)
#define TRSCER(port) (BASE_IO_ADDR + 0x0038)
#define TFTR(port) (BASE_IO_ADDR + 0x0048)
#define FDR(port) (BASE_IO_ADDR + 0x0050)
#define RMCR(port) (BASE_IO_ADDR + 0x0058)
#define FCFTR(port) (BASE_IO_ADDR + 0x0070)
#define ECMR(port) (BASE_IO_ADDR + 0x0100)
#define RFLR(port) (BASE_IO_ADDR + 0x0108)
#define ECSIPR(port) (BASE_IO_ADDR + 0x0118)
#define PIR(port) (BASE_IO_ADDR + 0x0120)
#define APR(port) (BASE_IO_ADDR + 0x0154)
#define MPR(port) (BASE_IO_ADDR + 0x0158)
#define TPAUSER(port) (BASE_IO_ADDR + 0x0164)
#define MAHR(port) (BASE_IO_ADDR + 0x01c0)
#define MALR(port) (BASE_IO_ADDR + 0x01c8)
#endif
/*
@ -183,7 +209,7 @@ enum DMAC_M_BIT {
EDMR_SRST = 0x03,
EMDR_DESC_R = 0x30, /* Descriptor reserve size */
EDMR_EL = 0x40, /* Litte endian */
#elif defined CONFIG_CPU_SH7757
#elif defined(CONFIG_CPU_SH7757) ||defined (CONFIG_CPU_SH7724)
EDMR_SRST = 0x01,
EMDR_DESC_R = 0x30, /* Descriptor reserve size */
EDMR_EL = 0x40, /* Litte endian */
@ -325,7 +351,8 @@ enum FCFTR_BIT {
/* Transfer descriptor bit */
enum TD_STS_BIT {
#if defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7757)
#if defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7757) \
|| defined(CONFIG_CPU_SH7724)
TD_TACT = 0x80000000,
#else
TD_TACT = 0x7fffffff,
@ -350,6 +377,10 @@ enum FELIC_MODE_BIT {
ECMR_PMDE = 0x00000200, ECMR_RE = 0x00000040, ECMR_TE = 0x00000020,
ECMR_ILB = 0x00000008, ECMR_ELB = 0x00000004, ECMR_DM = 0x00000002,
ECMR_PRM = 0x00000001,
#ifdef CONFIG_CPU_SH7724
ECMR_RTM = 0x00000010,
#endif
};
#ifdef CONFIG_CPU_SH7763
@ -357,6 +388,8 @@ enum FELIC_MODE_BIT {
ECMR_TXF | ECMR_MCT)
#elif CONFIG_CPU_SH7757
#define ECMR_CHG_DM (ECMR_ZPF)
#elif CONFIG_CPU_SH7724
#define ECMR_CHG_DM (ECMR_ZPF | ECMR_PFR | ECMR_RXF | ECMR_TXF)
#else
#define ECMR_CHG_DM (ECMR_ZPF | ECMR_PFR | ECMR_RXF | ECMR_TXF | ECMR_MCT)
#endif