ARM: remove dkb board support

This is still a non-generic board.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Lei Wen <leiwen@marvell.com>
Acked-by: Marek Vasut <marex@denx.de>
This commit is contained in:
Masahiro Yamada 2015-02-24 11:45:06 +09:00 committed by Tom Rini
parent 41fbbbbc71
commit 346cfba4f0
18 changed files with 1 additions and 793 deletions

View file

@ -223,10 +223,6 @@ config ORION5X
bool "Marvell Orion"
select CPU_ARM926EJS
config TARGET_DKB
bool "Support dkb"
select CPU_ARM926EJS
config TARGET_SPEAR300
bool "Support spear300"
select CPU_ARM926EJS
@ -757,7 +753,6 @@ source "board/BuR/tseries/Kconfig"
source "board/CarMediaLab/flea3/Kconfig"
source "board/Marvell/aspenite/Kconfig"
source "board/Marvell/db-mv784mp-gp/Kconfig"
source "board/Marvell/dkb/Kconfig"
source "board/Marvell/gplugd/Kconfig"
source "board/altera/socfpga/Kconfig"
source "board/armadeus/apf27/Kconfig"

View file

@ -19,5 +19,4 @@ obj-$(if $(filter lpc32xx,$(SOC)),y) += lpc32xx/
obj-$(CONFIG_MX25) += mx25/
obj-$(CONFIG_MX27) += mx27/
obj-$(if $(filter mxs,$(SOC)),y) += mxs/
obj-$(CONFIG_PANTHEON) += pantheon/
obj-$(if $(filter spear,$(SOC)),y) += spear/

View file

@ -1,9 +0,0 @@
#
# (C) Copyright 2011
# Marvell Semiconductor <www.marvell.com>
# Written-by: Lei Wen <leiwen@marvell.com>
#
# SPDX-License-Identifier: GPL-2.0+
#
obj-y = cpu.o timer.o dram.o

View file

@ -1,85 +0,0 @@
/*
* (C) Copyright 2011
* Marvell Semiconductor <www.marvell.com>
* Written-by: Lei Wen <leiwen@marvell.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/arch/cpu.h>
#include <asm/arch/pantheon.h>
#define UARTCLK14745KHZ (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1))
#define SET_MRVL_ID (1<<8)
#define L2C_RAM_SEL (1<<4)
int arch_cpu_init(void)
{
u32 val;
struct panthcpu_registers *cpuregs =
(struct panthcpu_registers*) PANTHEON_CPU_BASE;
struct panthapb_registers *apbclkres =
(struct panthapb_registers*) PANTHEON_APBC_BASE;
struct panthmpmu_registers *mpmu =
(struct panthmpmu_registers*) PANTHEON_MPMU_BASE;
struct panthapmu_registers *apmu =
(struct panthapmu_registers *) PANTHEON_APMU_BASE;
/* set SEL_MRVL_ID bit in PANTHEON_CPU_CONF register */
val = readl(&cpuregs->cpu_conf);
val = val | SET_MRVL_ID;
writel(val, &cpuregs->cpu_conf);
/* Turn on clock gating (PMUM_CCGR) */
writel(0xFFFFFFFF, &mpmu->ccgr);
/* Turn on clock gating (PMUM_ACGR) */
writel(0xFFFFFFFF, &mpmu->acgr);
/* Turn on uart2 clock */
writel(UARTCLK14745KHZ, &apbclkres->uart0);
/* Enable GPIO clock */
writel(APBC_APBCLK, &apbclkres->gpio);
#ifdef CONFIG_I2C_MV
/* Enable I2C clock */
writel(APBC_RST | APBC_FNCLK | APBC_APBCLK, &apbclkres->twsi);
writel(APBC_FNCLK | APBC_APBCLK, &apbclkres->twsi);
#endif
#ifdef CONFIG_MV_SDHCI
/* Enable mmc clock */
writel(APMU_PERI_CLK | APMU_AXI_CLK | APMU_PERI_RST | APMU_AXI_RST,
&apmu->sd1);
writel(APMU_PERI_CLK | APMU_AXI_CLK | APMU_PERI_RST | APMU_AXI_RST,
&apmu->sd3);
#endif
icache_enable();
return 0;
}
#if defined(CONFIG_DISPLAY_CPUINFO)
int print_cpuinfo(void)
{
u32 id;
struct panthcpu_registers *cpuregs =
(struct panthcpu_registers*) PANTHEON_CPU_BASE;
id = readl(&cpuregs->chip_id);
printf("SoC: PANTHEON 88AP%X-%X\n", (id & 0xFFF), (id >> 0x10));
return 0;
}
#endif
#ifdef CONFIG_I2C_MV
void i2c_clk_enable(void)
{
}
#endif

View file

@ -1,117 +0,0 @@
/*
* (C) Copyright 2011
* Marvell Semiconductor <www.marvell.com>
* Written-by: Lei Wen <leiwen@marvell.com>,
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/pantheon.h>
DECLARE_GLOBAL_DATA_PTR;
/*
* Pantheon DRAM controller supports upto 8 banks
* for chip select 0 and 1
*/
/*
* DDR Memory Control Registers
* Refer Datasheet 4.4
*/
struct panthddr_map_registers {
u32 cs; /* Memory Address Map Register -CS */
u32 pad[3];
};
struct panthddr_registers {
u8 pad[0x100 - 0x000];
struct panthddr_map_registers mmap[2];
};
/*
* panth_sdram_base - reads SDRAM Base Address Register
*/
u32 panth_sdram_base(int chip_sel)
{
struct panthddr_registers *ddr_regs =
(struct panthddr_registers *)PANTHEON_DRAM_BASE;
u32 result = 0;
u32 CS_valid = 0x01 & readl(&ddr_regs->mmap[chip_sel].cs);
if (!CS_valid)
return 0;
result = readl(&ddr_regs->mmap[chip_sel].cs) & 0xFF800000;
return result;
}
/*
* panth_sdram_size - reads SDRAM size
*/
u32 panth_sdram_size(int chip_sel)
{
struct panthddr_registers *ddr_regs =
(struct panthddr_registers *)PANTHEON_DRAM_BASE;
u32 result = 0;
u32 CS_valid = 0x01 & readl(&ddr_regs->mmap[chip_sel].cs);
if (!CS_valid)
return 0;
result = readl(&ddr_regs->mmap[chip_sel].cs);
result = (result >> 16) & 0xF;
if (result < 0x7) {
printf("Unknown DRAM Size\n");
return -1;
} else {
return ((0x8 << (result - 0x7)) * 1024 * 1024);
}
}
#ifndef CONFIG_SYS_BOARD_DRAM_INIT
int dram_init(void)
{
int i;
gd->ram_size = 0;
for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
gd->bd->bi_dram[i].start = panth_sdram_base(i);
gd->bd->bi_dram[i].size = panth_sdram_size(i);
/*
* It is assumed that all memory banks are consecutive
* and without gaps.
* If the gap is found, ram_size will be reported for
* consecutive memory only
*/
if (gd->bd->bi_dram[i].start != gd->ram_size)
break;
gd->ram_size += gd->bd->bi_dram[i].size;
}
for (; i < CONFIG_NR_DRAM_BANKS; i++) {
/*
* If above loop terminated prematurely, we need to set
* remaining banks' start address & size as 0. Otherwise other
* u-boot functions and Linux kernel gets wrong values which
* could result in crash
*/
gd->bd->bi_dram[i].start = 0;
gd->bd->bi_dram[i].size = 0;
}
return 0;
}
/*
* If this function is not defined here,
* board.c alters dram bank zero configuration defined above.
*/
void dram_init_banksize(void)
{
dram_init();
}
#endif /* CONFIG_SYS_BOARD_DRAM_INIT */

View file

@ -1,201 +0,0 @@
/*
* (C) Copyright 2011
* Marvell Semiconductor <www.marvell.com>
* Written-by: Lei Wen <leiwen@marvell.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/arch/cpu.h>
#include <asm/arch/pantheon.h>
/*
* Timer registers
* Refer 6.2.9 in Datasheet
*/
struct panthtmr_registers {
u32 clk_ctrl; /* Timer clk control reg */
u32 match[9]; /* Timer match registers */
u32 count[3]; /* Timer count registers */
u32 status[3];
u32 ie[3];
u32 preload[3]; /* Timer preload value */
u32 preload_ctrl[3];
u32 wdt_match_en;
u32 wdt_match_r;
u32 wdt_val;
u32 wdt_sts;
u32 icr[3];
u32 wdt_icr;
u32 cer; /* Timer count enable reg */
u32 cmr;
u32 ilr[3];
u32 wcr;
u32 wfar;
u32 wsar;
u32 cvwr[3];
};
#define TIMER 0 /* Use TIMER 0 */
/* Each timer has 3 match registers */
#define MATCH_CMP(x) ((3 * TIMER) + x)
#define TIMER_LOAD_VAL 0xffffffff
#define COUNT_RD_REQ 0x1
DECLARE_GLOBAL_DATA_PTR;
/* Using gd->arch.tbu from timestamp and gd->arch.tbl for lastdec */
/*
* For preventing risk of instability in reading counter value,
* first set read request to register cvwr and then read same
* register after it captures counter value.
*/
ulong read_timer(void)
{
struct panthtmr_registers *panthtimers =
(struct panthtmr_registers *) PANTHEON_TIMER_BASE;
volatile int loop=100;
ulong val;
writel(COUNT_RD_REQ, &panthtimers->cvwr);
while (loop--)
val = readl(&panthtimers->cvwr);
/*
* This stop gcc complain and prevent loop mistake init to 0
*/
val = readl(&panthtimers->cvwr);
return val;
}
ulong get_timer_masked(void)
{
ulong now = read_timer();
if (now >= gd->arch.tbl) {
/* normal mode */
gd->arch.tbu += now - gd->arch.tbl;
} else {
/* we have an overflow ... */
gd->arch.tbu += now + TIMER_LOAD_VAL - gd->arch.tbl;
}
gd->arch.tbl = now;
return gd->arch.tbu;
}
ulong get_timer(ulong base)
{
return ((get_timer_masked() / (CONFIG_SYS_HZ_CLOCK / 1000)) -
base);
}
void __udelay(unsigned long usec)
{
ulong delayticks;
ulong endtime;
delayticks = (usec * (CONFIG_SYS_HZ_CLOCK / 1000000));
endtime = get_timer_masked() + delayticks;
while (get_timer_masked() < endtime)
;
}
/*
* init the Timer
*/
int timer_init(void)
{
struct panthapb_registers *apb1clkres =
(struct panthapb_registers *) PANTHEON_APBC_BASE;
struct panthtmr_registers *panthtimers =
(struct panthtmr_registers *) PANTHEON_TIMER_BASE;
/* Enable Timer clock at 3.25 MHZ */
writel(APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3), &apb1clkres->timers);
/* load value into timer */
writel(0x0, &panthtimers->clk_ctrl);
/* Use Timer 0 Match Resiger 0 */
writel(TIMER_LOAD_VAL, &panthtimers->match[MATCH_CMP(0)]);
/* Preload value is 0 */
writel(0x0, &panthtimers->preload[TIMER]);
/* Enable match comparator 0 for Timer 0 */
writel(0x1, &panthtimers->preload_ctrl[TIMER]);
/* Enable timer 0 */
writel(0x1, &panthtimers->cer);
/* init the gd->arch.tbu and gd->arch.tbl value */
gd->arch.tbl = read_timer();
gd->arch.tbu = 0;
return 0;
}
#define MPMU_APRR_WDTR (1<<4)
#define TMR_WFAR 0xbaba /* WDT Register First key */
#define TMP_WSAR 0xeb10 /* WDT Register Second key */
/*
* This function uses internal Watchdog Timer
* based reset mechanism.
* Steps to write watchdog registers (protected access)
* 1. Write key value to TMR_WFAR reg.
* 2. Write key value to TMP_WSAR reg.
* 3. Perform write operation.
*/
void reset_cpu (unsigned long ignored)
{
struct panthmpmu_registers *mpmu =
(struct panthmpmu_registers *) PANTHEON_MPMU_BASE;
struct panthtmr_registers *panthtimers =
(struct panthtmr_registers *) PANTHEON_WD_TIMER_BASE;
u32 val;
/* negate hardware reset to the WDT after system reset */
val = readl(&mpmu->aprr);
val = val | MPMU_APRR_WDTR;
writel(val, &mpmu->aprr);
/* reset/enable WDT clock */
writel(APBC_APBCLK, &mpmu->wdtpcr);
/* clear previous WDT status */
writel(TMR_WFAR, &panthtimers->wfar);
writel(TMP_WSAR, &panthtimers->wsar);
writel(0, &panthtimers->wdt_sts);
/* set match counter */
writel(TMR_WFAR, &panthtimers->wfar);
writel(TMP_WSAR, &panthtimers->wsar);
writel(0xf, &panthtimers->wdt_match_r);
/* enable WDT reset */
writel(TMR_WFAR, &panthtimers->wfar);
writel(TMP_WSAR, &panthtimers->wsar);
writel(0x3, &panthtimers->wdt_match_en);
/*enable functional WDT clock */
writel(APBC_APBCLK | APBC_FNCLK, &mpmu->wdtpcr);
}
/*
* This function is derived from PowerPC code (read timebase as long long).
* On ARM it just returns the timer value.
*/
unsigned long long get_ticks(void)
{
return get_timer(0);
}
/*
* This function is derived from PowerPC code (timebase clock frequency).
* On ARM it returns the number of timer ticks per second.
*/
ulong get_tbclk (void)
{
return (ulong)CONFIG_SYS_HZ;
}

View file

@ -1,53 +0,0 @@
/*
* (C) Copyright 2011
* Marvell Semiconductor <www.marvell.com>
* Written-by: Lei Wen <leiwen@marvell.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _PANTHEON_CONFIG_H
#define _PANTHEON_CONFIG_H
#include <asm/arch/pantheon.h>
/* default Dcache Line length for pantheon */
#define CONFIG_SYS_CACHELINE_SIZE 32
#define CONFIG_SYS_TCLK (14745600) /* NS16550 clk config */
#define CONFIG_SYS_HZ_CLOCK (3250000) /* Timer Freq. 3.25MHZ */
#define CONFIG_MARVELL_MFP /* Enable mvmfp driver */
#define MV_MFPR_BASE PANTHEON_MFPR_BASE
#define MV_UART_CONSOLE_BASE PANTHEON_UART1_BASE
#define CONFIG_SYS_NS16550_IER (1 << 6) /* Bit 6 in UART_IER register
represents UART Unit Enable */
/*
* I2C definition
*/
#ifdef CONFIG_CMD_I2C
#define CONFIG_I2C_MV 1
#define CONFIG_MV_I2C_REG 0xd4011000
#define CONFIG_HARD_I2C 1
#define CONFIG_SYS_I2C_SPEED 0
#define CONFIG_SYS_I2C_SLAVE 0xfe
#endif
/*
* MMC definition
*/
#ifdef CONFIG_CMD_MMC
#define CONFIG_CMD_FAT 1
#define CONFIG_MMC 1
#define CONFIG_GENERIC_MMC 1
#define CONFIG_SDHCI 1
#define CONFIG_MMC_SDHCI_IO_ACCESSORS 1
#define CONFIG_SYS_MMC_MAX_BLK_COUNT 0x1000
#define CONFIG_MMC_SDMA 1
#define CONFIG_MV_SDHCI 1
#define CONFIG_DOS_PARTITION 1
#define CONFIG_EFI_PARTITION 1
#define CONFIG_SYS_MMC_NUM 2
#define CONFIG_SYS_MMC_BASE {0xD4280000, 0xd4281000}
#endif
#endif /* _PANTHEON_CONFIG_H */

View file

@ -1,77 +0,0 @@
/*
* (C) Copyright 2011
* Marvell Semiconductor <www.marvell.com>
* Written-by: Lei Wen <leiwen@marvell.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _PANTHEON_CPU_H
#define _PANTHEON_CPU_H
#include <asm/io.h>
#include <asm/system.h>
/*
* Main Power Management (MPMU) Registers
* Refer Register Datasheet 9.1
*/
struct panthmpmu_registers {
u8 pad0[0x0024];
u32 ccgr; /*0x0024*/
u8 pad1[0x0200 - 0x024 - 4];
u32 wdtpcr; /*0x0200*/
u8 pad2[0x1020 - 0x200 - 4];
u32 aprr; /*0x1020*/
u32 acgr; /*0x1024*/
};
/*
* Application Power Management (APMU) Registers
* Refer Register Datasheet 9.2
*/
struct panthapmu_registers {
u8 pad0[0x0054];
u32 sd1; /*0x0054*/
u8 pad1[0x00e0 - 0x054 - 4];
u32 sd3; /*0x00e0*/
};
/*
* APB Clock Reset/Control Registers
* Refer Register Datasheet 6.14
*/
struct panthapb_registers {
u32 uart0; /*0x000*/
u32 uart1; /*0x004*/
u32 gpio; /*0x008*/
u8 pad0[0x02c - 0x08 - 4];
u32 twsi; /*0x02c*/
u8 pad1[0x034 - 0x2c - 4];
u32 timers; /*0x034*/
};
/*
* CPU Interface Registers
* Refer Register Datasheet 4.3
*/
struct panthcpu_registers {
u32 chip_id; /* Chip Id Reg */
u32 pad;
u32 cpu_conf; /* CPU Conf Reg */
u32 pad1;
u32 cpu_sram_spd; /* CPU SRAM Speed Reg */
u32 pad2;
u32 cpu_l2c_spd; /* CPU L2cache Speed Conf */
u32 mcb_conf; /* MCB Conf Reg */
u32 sys_boot_ctl; /* Sytem Boot Control */
};
/*
* Functions
*/
u32 panth_sdram_base(int);
u32 panth_sdram_size(int);
int mv_sdh_init(u32 regbase, u32 max_clk, u32 min_clk, u32 quirks);
#endif /* _PANTHEON_CPU_H */

View file

@ -1,39 +0,0 @@
/*
* Based on arch/arm/include/asm/arch-armada100/mfp.h
* (C) Copyright 2011
* Marvell Semiconductor <www.marvell.com>
* Written-by: Lei Wen <leiwen@marvell.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __PANTHEON_MFP_H
#define __PANTHEON_MFP_H
/*
* Frequently used MFP Configuration macros for all PANTHEON family of SoCs
*
* offset, pull,pF, drv,dF, edge,eF ,afn,aF
*/
/* UART2 */
#define MFP47_UART2_RXD (MFP_REG(0x198) | MFP_AF6 | MFP_DRIVE_MEDIUM)
#define MFP48_UART2_TXD (MFP_REG(0x19c) | MFP_AF6 | MFP_DRIVE_MEDIUM)
#define MFP53_CI2C_SCL (MFP_REG(0x1b0) | MFP_AF2 | MFP_DRIVE_MEDIUM)
#define MFP54_CI2C_SDA (MFP_REG(0x1b4) | MFP_AF2 | MFP_DRIVE_MEDIUM)
/* More macros can be defined here... */
#define MFP_MMC1_DAT7 (MFP_REG(0x84) | MFP_AF0 | MFP_DRIVE_MEDIUM)
#define MFP_MMC1_DAT6 (MFP_REG(0x88) | MFP_AF0 | MFP_DRIVE_MEDIUM)
#define MFP_MMC1_DAT5 (MFP_REG(0x8c) | MFP_AF0 | MFP_DRIVE_MEDIUM)
#define MFP_MMC1_DAT4 (MFP_REG(0x90) | MFP_AF0 | MFP_DRIVE_MEDIUM)
#define MFP_MMC1_DAT3 (MFP_REG(0x94) | MFP_AF0 | MFP_DRIVE_FAST)
#define MFP_MMC1_DAT2 (MFP_REG(0x98) | MFP_AF0 | MFP_DRIVE_FAST)
#define MFP_MMC1_DAT1 (MFP_REG(0x9c) | MFP_AF0 | MFP_DRIVE_FAST)
#define MFP_MMC1_DAT0 (MFP_REG(0xa0) | MFP_AF0 | MFP_DRIVE_FAST)
#define MFP_MMC1_CMD (MFP_REG(0xa4) | MFP_AF0 | MFP_DRIVE_FAST)
#define MFP_MMC1_CLK (MFP_REG(0xa8) | MFP_AF0 | MFP_DRIVE_FAST)
#define MFP_MMC1_CD (MFP_REG(0xac) | MFP_AF0 | MFP_DRIVE_MEDIUM)
#define MFP_MMC1_WP (MFP_REG(0xb0) | MFP_AF0 | MFP_DRIVE_MEDIUM)
#define MFP_PIN_MAX 117
#endif

View file

@ -1,38 +0,0 @@
/*
* (C) Copyright 2011
* Marvell Semiconductor <www.marvell.com>
* Written-by: Lei Wen <leiwen@marvell.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _PANTHEON_H
#define _PANTHEON_H
/* Common APB clock register bit definitions */
#define APBC_APBCLK (1<<0) /* APB Bus Clock Enable */
#define APBC_FNCLK (1<<1) /* Functional Clock Enable */
#define APBC_RST (1<<2) /* Reset Generation */
/* Functional Clock Selection Mask */
#define APBC_FNCLKSEL(x) (((x) & 0xf) << 4)
/* Common APMU register bit definitions */
#define APMU_PERI_CLK (1<<4) /* Peripheral Clock Enable */
#define APMU_AXI_CLK (1<<3) /* AXI Clock Enable*/
#define APMU_PERI_RST (1<<1) /* Peripheral Reset */
#define APMU_AXI_RST (1<<0) /* AXI Reset */
/* Register Base Addresses */
#define PANTHEON_DRAM_BASE 0xB0000000
#define PANTHEON_TIMER_BASE 0xD4014000
#define PANTHEON_WD_TIMER_BASE 0xD4080000
#define PANTHEON_APBC_BASE 0xD4015000
#define PANTHEON_UART1_BASE 0xD4017000
#define PANTHEON_UART2_BASE 0xD4018000
#define PANTHEON_GPIO_BASE 0xD4019000
#define PANTHEON_MFPR_BASE 0xD401E000
#define PANTHEON_MPMU_BASE 0xD4050000
#define PANTHEON_APMU_BASE 0xD4282800
#define PANTHEON_CPU_BASE 0xD4282C00
#endif /* _PANTHEON_H */

View file

@ -1,15 +0,0 @@
if TARGET_DKB
config SYS_BOARD
default "dkb"
config SYS_VENDOR
default "Marvell"
config SYS_SOC
default "pantheon"
config SYS_CONFIG_NAME
default "dkb"
endif

View file

@ -1,6 +0,0 @@
DKB BOARD
M: Lei Wen <leiwen@marvell.com>
S: Maintained
F: board/Marvell/dkb/
F: include/configs/dkb.h
F: configs/dkb_defconfig

View file

@ -1,9 +0,0 @@
#
# (C) Copyright 2011
# Marvell Semiconductor <www.marvell.com>
# Written-by: Lei Wen <leiwen@marvell.com>
#
# SPDX-License-Identifier: GPL-2.0+
#
obj-y := dkb.o

View file

@ -1,85 +0,0 @@
/*
* (C) Copyright 2011
* Marvell Semiconductor <www.marvell.com>
* Written-by: Lei Wen <leiwen@marvell.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <mvmfp.h>
#include <i2c.h>
#include <asm/arch/mfp.h>
#include <asm/arch/cpu.h>
#ifdef CONFIG_GENERIC_MMC
#include <sdhci.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
int board_early_init_f(void)
{
u32 mfp_cfg[] = {
/* Enable Console on UART2 */
MFP47_UART2_RXD,
MFP48_UART2_TXD,
/* I2C */
MFP53_CI2C_SCL,
MFP54_CI2C_SDA,
/* MMC1 */
MFP_MMC1_DAT7,
MFP_MMC1_DAT6,
MFP_MMC1_DAT5,
MFP_MMC1_DAT4,
MFP_MMC1_DAT3,
MFP_MMC1_DAT2,
MFP_MMC1_DAT1,
MFP_MMC1_DAT0,
MFP_MMC1_CMD,
MFP_MMC1_CLK,
MFP_MMC1_CD,
MFP_MMC1_WP,
MFP_EOC /*End of configureation*/
};
/* configure MFP's */
mfp_config(mfp_cfg);
return 0;
}
int board_init(void)
{
/* arch number of Board */
gd->bd->bi_arch_number = MACH_TYPE_TTC_DKB;
/* adress of boot parameters */
gd->bd->bi_boot_params = panth_sdram_base(0) + 0x100;
return 0;
}
#ifdef CONFIG_GENERIC_MMC
#define I2C_SLAVE_ADDR 0x34
#define LDO13_REG 0x28
#define LDO_V30 0x6
#define LDO_VOLTAGE(x) ((x & 0x7) << 1)
#define LDO_EN 0x1
int board_mmc_init(bd_t *bd)
{
ulong mmc_base_address[CONFIG_SYS_MMC_NUM] = CONFIG_SYS_MMC_BASE;
u8 i, data;
/* set LDO 13 to 3.0v */
data = LDO_VOLTAGE(LDO_V30) | LDO_EN;
i2c_write(I2C_SLAVE_ADDR, LDO13_REG, 1, &data, 1);
for (i = 0; i < CONFIG_SYS_MMC_NUM; i++) {
if (mv_sdh_init(mmc_base_address[i], 0, 0,
SDHCI_QUIRK_32BIT_DMA_ADDR))
return 1;
}
return 0;
}
#endif

View file

@ -1,2 +0,0 @@
CONFIG_ARM=y
CONFIG_TARGET_DKB=y

View file

@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order.
Board Arch CPU Commit Removed Last known maintainer/contact
=================================================================================================
dkb arm arm926ejs - - Lei Wen <leiwen@marvell.com>
jadecpu arm arm926ejs - - Matthias Weisser <weisserm@arcor.de>
icecube_5200 powerpc mpc5xxx 37b608a5 2015-01-23 Wolfgang Denk <wd@denx.de>
Lite5200 powerpc mpc5xxx 37b608a5 2015-01-23

View file

@ -1,51 +0,0 @@
/*
* (C) Copyright 2011
* Marvell Semiconductor <www.marvell.com>
* Written-by: Lei Wen <leiwen@marvell.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_DKB_H
#define __CONFIG_DKB_H
/*
* Version number information
*/
#define CONFIG_IDENT_STRING "\nMarvell-TTC DKB"
/*
* High Level Configuration Options
*/
#define CONFIG_SHEEVA_88SV331xV5 1 /* CPU Core subversion */
#define CONFIG_PANTHEON 1 /* SOC Family Name */
#define CONFIG_MACH_TTC_DKB 1 /* Machine type */
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - 0x00200000)
#define CONFIG_NR_DRAM_BANKS_MAX 2
/*
* Commands configuration
*/
#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
#include <config_cmd_default.h>
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MMC
#undef CONFIG_CMD_NET
#undef CONFIG_CMD_NFS
/*
* mv-common.h should be defined after CMD configs since it used them
* to enable certain macros
*/
#include "mv-common.h"
#undef CONFIG_ARCH_MISC_INIT
/*
* Environment variables configurations
*/
#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
#define CONFIG_ENV_SIZE 0x20000 /* 64k */
#endif /* __CONFIG_DKB_H */