mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-09-21 07:01:57 +00:00
ARM: dts: sun8i: A83T: Sync from Linux v5.18-rc1
Copy the devicetree source for the A83T SoC and all existing boards from the Linux v5.18-rc1 tag. To maintain ABI compatibility with existing LTS kernels, one change moving some IP blocks to the r_intc interrupt controller is excluded. This effectively reverts Linux commits 994e5818392c and 9fdef3c3d8c2. As with the other SoCs, updates of note include adding detection GPIO properties in the USB PHY nodes. Signed-off-by: Samuel Holland <samuel@sholland.org>
This commit is contained in:
Samuel Holland
Andre Przywara
parent
6f97e028ef
commit
2d648e6982
6 changed files with 515 additions and 56 deletions
|
|
@ -48,6 +48,11 @@
|
|||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
|
||||
ac_power_supply: ac-power {
|
||||
compatible = "x-powers,axp813-ac-power-supply";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
axp_adc: adc {
|
||||
compatible = "x-powers,axp813-adc";
|
||||
#io-channel-cells = <1>;
|
||||
|
|
@ -58,18 +63,18 @@
|
|||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
gpio0_ldo: gpio0-ldo {
|
||||
gpio0_ldo: gpio0-ldo-pin {
|
||||
pins = "GPIO0";
|
||||
function = "ldo";
|
||||
};
|
||||
|
||||
gpio1_ldo: gpio1-ldo {
|
||||
gpio1_ldo: gpio1-ldo-pin {
|
||||
pins = "GPIO1";
|
||||
function = "ldo";
|
||||
};
|
||||
};
|
||||
|
||||
battery_power_supply: battery-power-supply {
|
||||
battery_power_supply: battery-power {
|
||||
compatible = "x-powers,axp813-battery-power-supply";
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -166,4 +171,8 @@
|
|||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
usb_power_supply: usb-power {
|
||||
compatible = "x-powers,axp813-usb-power-supply";
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -79,6 +79,14 @@
|
|||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <®_dcdc2>;
|
||||
};
|
||||
|
||||
&cpu100 {
|
||||
cpu-supply = <®_dcdc3>;
|
||||
};
|
||||
|
||||
&ehci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -146,6 +154,10 @@
|
|||
|
||||
#include "axp81x.dtsi"
|
||||
|
||||
&ac_power_supply {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
®_aldo1 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
|
|
|
|||
|
|
@ -74,12 +74,12 @@
|
|||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
blue {
|
||||
led-0 {
|
||||
label = "bananapi-m3:blue:usr";
|
||||
gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
green {
|
||||
led-1 {
|
||||
label = "bananapi-m3:green:usr";
|
||||
gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
|
@ -107,6 +107,14 @@
|
|||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <®_dcdc2>;
|
||||
};
|
||||
|
||||
&cpu100 {
|
||||
cpu-supply = <®_dcdc3>;
|
||||
};
|
||||
|
||||
&de {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -183,6 +191,11 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&r_cir {
|
||||
clock-frequency = <3000000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&r_rsb {
|
||||
status = "okay";
|
||||
|
||||
|
|
@ -224,6 +237,14 @@
|
|||
|
||||
#include "axp81x.dtsi"
|
||||
|
||||
&ac_power_supply {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&battery_power_supply {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
®_aldo1 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
|
|
@ -301,8 +322,8 @@
|
|||
|
||||
®_dldo3 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <2500000>;
|
||||
regulator-max-microvolt = <2500000>;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc-pd";
|
||||
};
|
||||
|
||||
|
|
@ -350,11 +371,37 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm43438-bt";
|
||||
clocks = <&ac100_rtc 1>;
|
||||
clock-names = "lpo";
|
||||
vbat-supply = <®_dldo1>;
|
||||
vddio-supply = <®_dldo1>;
|
||||
device-wakeup-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
|
||||
host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
|
||||
shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
|
||||
};
|
||||
};
|
||||
|
||||
&usb_otg {
|
||||
dr_mode = "otg";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_power_supply {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbphy {
|
||||
usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
|
||||
usb0_vbus_power-supply = <&usb_power_supply>;
|
||||
usb0_vbus-supply = <®_drivevbus>;
|
||||
usb1_vbus-supply = <®_usb1_vbus>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -60,25 +60,36 @@
|
|||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
hdmi-connector {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_con_in: endpoint {
|
||||
remote-endpoint = <&hdmi_out_con>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
blue {
|
||||
led-0 {
|
||||
label = "cubietruck-plus:blue:usr";
|
||||
gpios = <&pio 3 25 GPIO_ACTIVE_HIGH>; /* PD25 */
|
||||
};
|
||||
|
||||
orange {
|
||||
led-1 {
|
||||
label = "cubietruck-plus:orange:usr";
|
||||
gpios = <&pio 3 26 GPIO_ACTIVE_HIGH>; /* PD26 */
|
||||
};
|
||||
|
||||
white {
|
||||
led-2 {
|
||||
label = "cubietruck-plus:white:usr";
|
||||
gpios = <&pio 3 27 GPIO_ACTIVE_HIGH>; /* PD27 */
|
||||
};
|
||||
|
||||
green {
|
||||
led-3 {
|
||||
label = "cubietruck-plus:green:usr";
|
||||
gpios = <&pio 4 4 GPIO_ACTIVE_HIGH>; /* PE4 */
|
||||
};
|
||||
|
|
@ -90,7 +101,7 @@
|
|||
initial-mode = <1>; /* initialize in HUB mode */
|
||||
disabled-ports = <1>;
|
||||
intn-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
|
||||
reset-gpios = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */
|
||||
reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */
|
||||
connect-gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
|
||||
refclk-frequency = <19200000>;
|
||||
};
|
||||
|
|
@ -145,6 +156,18 @@
|
|||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <®_dcdc2>;
|
||||
};
|
||||
|
||||
&cpu100 {
|
||||
cpu-supply = <®_dcdc3>;
|
||||
};
|
||||
|
||||
&de {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ehci0 {
|
||||
/* GL830 USB-to-SATA bridge here */
|
||||
status = "okay";
|
||||
|
|
@ -164,6 +187,16 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_out {
|
||||
hdmi_out_con: endpoint {
|
||||
remote-endpoint = <&hdmi_con_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio {
|
||||
rgmii_phy: ethernet-phy@1 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
|
|
@ -239,6 +272,14 @@
|
|||
|
||||
#include "axp81x.dtsi"
|
||||
|
||||
&ac_power_supply {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&battery_power_supply {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
®_aldo1 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
|
|
@ -386,11 +427,37 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm4330-bt";
|
||||
clocks = <&ac100_rtc 1>;
|
||||
clock-names = "lpo";
|
||||
vbat-supply = <®_dcdc1>;
|
||||
vddio-supply = <®_sw>;
|
||||
device-wakeup-gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
|
||||
host-wakeup-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
|
||||
shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
|
||||
};
|
||||
};
|
||||
|
||||
&usb_otg {
|
||||
dr_mode = "otg";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_power_supply {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbphy {
|
||||
usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
|
||||
usb0_vbus_power-supply = <&usb_power_supply>;
|
||||
usb0_vbus-supply = <®_drivevbus>;
|
||||
usb1_vbus-supply = <®_usb1_vbus>;
|
||||
usb2_vbus-supply = <®_usb2_vbus>;
|
||||
status = "okay";
|
||||
|
|
|
|||
|
|
@ -46,6 +46,7 @@
|
|||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "TBS A711 Tablet";
|
||||
|
|
@ -64,7 +65,7 @@
|
|||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
|
||||
enable-gpios = <&pio 3 29 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
power-supply = <®_sw>;
|
||||
brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
|
||||
default-brightness-level = <9>;
|
||||
};
|
||||
|
|
@ -98,6 +99,13 @@
|
|||
};
|
||||
};
|
||||
|
||||
reg_gps: reg-gps {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "gps";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
};
|
||||
|
||||
reg_vbat: reg-vbat {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vbat";
|
||||
|
|
@ -156,10 +164,39 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
|
||||
touchscreen@38 {
|
||||
compatible = "edt,edt-ft5206";
|
||||
reg = <0x38>;
|
||||
interrupt-parent = <&r_pio>;
|
||||
interrupts = <0 7 IRQ_TYPE_EDGE_FALLING>; /* PL7 */
|
||||
reset-gpios = <&pio 3 5 GPIO_ACTIVE_LOW>; /* PD5 */
|
||||
vcc-supply = <®_ldo_io0>;
|
||||
touchscreen-size-x = <1024>;
|
||||
touchscreen-size-y = <600>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
|
||||
accelerometer@18 {
|
||||
compatible = "bosch,bma250";
|
||||
reg = <0x18>;
|
||||
interrupt-parent = <&pio>;
|
||||
interrupts = <7 10 IRQ_TYPE_EDGE_RISING>; /* PH10 / EINT10 */
|
||||
};
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
vmmc-supply = <®_dcdc1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc0_pins>;
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -171,6 +208,7 @@
|
|||
vqmmc-supply = <®_dldo1>;
|
||||
non-removable;
|
||||
wakeup-source;
|
||||
keep-power-in-suspend;
|
||||
status = "okay";
|
||||
|
||||
brcmf: wifi@1 {
|
||||
|
|
@ -199,6 +237,25 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&r_lradc {
|
||||
vref-supply = <®_aldo2>;
|
||||
status = "okay";
|
||||
|
||||
button-210 {
|
||||
label = "Volume Up";
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
channel = <0>;
|
||||
voltage = <210000>;
|
||||
};
|
||||
|
||||
button-410 {
|
||||
label = "Volume Down";
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
channel = <0>;
|
||||
voltage = <410000>;
|
||||
};
|
||||
};
|
||||
|
||||
&r_rsb {
|
||||
status = "okay";
|
||||
|
||||
|
|
@ -317,8 +374,8 @@
|
|||
};
|
||||
|
||||
®_dldo3 {
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vdd-csi";
|
||||
};
|
||||
|
||||
|
|
@ -390,8 +447,7 @@
|
|||
};
|
||||
|
||||
&tcon0_out {
|
||||
tcon0_out_lcd: endpoint@0 {
|
||||
reg = <0>;
|
||||
tcon0_out_lcd: endpoint {
|
||||
remote-endpoint = <&panel_input>;
|
||||
};
|
||||
};
|
||||
|
|
@ -406,18 +462,45 @@
|
|||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm20702a1";
|
||||
clocks = <&ac100_rtc 1>;
|
||||
clock-names = "lpo";
|
||||
vbat-supply = <®_vbat>;
|
||||
vddio-supply = <®_dldo1>;
|
||||
device-wakeup-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
|
||||
host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
|
||||
shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
|
||||
max-speed = <1500000>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart2_pb_pins>;
|
||||
status = "okay";
|
||||
|
||||
gnss {
|
||||
compatible = "u-blox,neo-6m";
|
||||
|
||||
v-bckp-supply = <®_rtc_ldo>;
|
||||
vcc-supply = <®_gps>;
|
||||
current-speed = <9600>;
|
||||
};
|
||||
};
|
||||
|
||||
&usb_otg {
|
||||
dr_mode = "otg";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbphy {
|
||||
usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
|
||||
usb0_id_det-gpios = <&pio 7 11 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH11 */
|
||||
usb0_vbus_power-supply = <&usb_power_supply>;
|
||||
usb0_vbus-supply = <®_drivevbus>;
|
||||
usb1_vbus_supply = <®_vmain>;
|
||||
usb2_vbus_supply = <®_vmain>;
|
||||
usb1_vbus-supply = <®_vmain>;
|
||||
usb2_vbus-supply = <®_vmain>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -50,6 +50,7 @@
|
|||
#include <dt-bindings/reset/sun8i-a83t-ccu.h>
|
||||
#include <dt-bindings/reset/sun8i-de2.h>
|
||||
#include <dt-bindings/reset/sun8i-r-ccu.h>
|
||||
#include <dt-bindings/thermal/thermal.h>
|
||||
|
||||
/ {
|
||||
interrupt-parent = <&gic>;
|
||||
|
|
@ -61,79 +62,91 @@
|
|||
#size-cells = <0>;
|
||||
|
||||
cpu0: cpu@0 {
|
||||
clocks = <&ccu CLK_C0CPUX>;
|
||||
clock-names = "cpu";
|
||||
compatible = "arm,cortex-a7";
|
||||
device_type = "cpu";
|
||||
clocks = <&ccu CLK_C0CPUX>;
|
||||
operating-points-v2 = <&cpu0_opp_table>;
|
||||
cci-control-port = <&cci_control0>;
|
||||
enable-method = "allwinner,sun8i-a83t-smp";
|
||||
reg = <0>;
|
||||
#cooling-cells = <2>;
|
||||
};
|
||||
|
||||
cpu@1 {
|
||||
cpu1: cpu@1 {
|
||||
compatible = "arm,cortex-a7";
|
||||
device_type = "cpu";
|
||||
clocks = <&ccu CLK_C0CPUX>;
|
||||
operating-points-v2 = <&cpu0_opp_table>;
|
||||
cci-control-port = <&cci_control0>;
|
||||
enable-method = "allwinner,sun8i-a83t-smp";
|
||||
reg = <1>;
|
||||
#cooling-cells = <2>;
|
||||
};
|
||||
|
||||
cpu@2 {
|
||||
cpu2: cpu@2 {
|
||||
compatible = "arm,cortex-a7";
|
||||
device_type = "cpu";
|
||||
clocks = <&ccu CLK_C0CPUX>;
|
||||
operating-points-v2 = <&cpu0_opp_table>;
|
||||
cci-control-port = <&cci_control0>;
|
||||
enable-method = "allwinner,sun8i-a83t-smp";
|
||||
reg = <2>;
|
||||
#cooling-cells = <2>;
|
||||
};
|
||||
|
||||
cpu@3 {
|
||||
cpu3: cpu@3 {
|
||||
compatible = "arm,cortex-a7";
|
||||
device_type = "cpu";
|
||||
clocks = <&ccu CLK_C0CPUX>;
|
||||
operating-points-v2 = <&cpu0_opp_table>;
|
||||
cci-control-port = <&cci_control0>;
|
||||
enable-method = "allwinner,sun8i-a83t-smp";
|
||||
reg = <3>;
|
||||
#cooling-cells = <2>;
|
||||
};
|
||||
|
||||
cpu100: cpu@100 {
|
||||
clocks = <&ccu CLK_C1CPUX>;
|
||||
clock-names = "cpu";
|
||||
compatible = "arm,cortex-a7";
|
||||
device_type = "cpu";
|
||||
clocks = <&ccu CLK_C1CPUX>;
|
||||
operating-points-v2 = <&cpu1_opp_table>;
|
||||
cci-control-port = <&cci_control1>;
|
||||
enable-method = "allwinner,sun8i-a83t-smp";
|
||||
reg = <0x100>;
|
||||
#cooling-cells = <2>;
|
||||
};
|
||||
|
||||
cpu@101 {
|
||||
cpu101: cpu@101 {
|
||||
compatible = "arm,cortex-a7";
|
||||
device_type = "cpu";
|
||||
clocks = <&ccu CLK_C1CPUX>;
|
||||
operating-points-v2 = <&cpu1_opp_table>;
|
||||
cci-control-port = <&cci_control1>;
|
||||
enable-method = "allwinner,sun8i-a83t-smp";
|
||||
reg = <0x101>;
|
||||
#cooling-cells = <2>;
|
||||
};
|
||||
|
||||
cpu@102 {
|
||||
cpu102: cpu@102 {
|
||||
compatible = "arm,cortex-a7";
|
||||
device_type = "cpu";
|
||||
clocks = <&ccu CLK_C1CPUX>;
|
||||
operating-points-v2 = <&cpu1_opp_table>;
|
||||
cci-control-port = <&cci_control1>;
|
||||
enable-method = "allwinner,sun8i-a83t-smp";
|
||||
reg = <0x102>;
|
||||
#cooling-cells = <2>;
|
||||
};
|
||||
|
||||
cpu@103 {
|
||||
cpu103: cpu@103 {
|
||||
compatible = "arm,cortex-a7";
|
||||
device_type = "cpu";
|
||||
clocks = <&ccu CLK_C1CPUX>;
|
||||
operating-points-v2 = <&cpu1_opp_table>;
|
||||
cci-control-port = <&cci_control1>;
|
||||
enable-method = "allwinner,sun8i-a83t-smp";
|
||||
reg = <0x103>;
|
||||
#cooling-cells = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -187,12 +200,7 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0x40000000 0x80000000>;
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
cpu0_opp_table: opp_table0 {
|
||||
cpu0_opp_table: opp-table-cluster0 {
|
||||
compatible = "operating-points-v2";
|
||||
opp-shared;
|
||||
|
||||
|
|
@ -245,7 +253,7 @@
|
|||
};
|
||||
};
|
||||
|
||||
cpu1_opp_table: opp_table1 {
|
||||
cpu1_opp_table: opp-table-cluster1 {
|
||||
compatible = "operating-points-v2";
|
||||
opp-shared;
|
||||
|
||||
|
|
@ -306,16 +314,27 @@
|
|||
|
||||
display_clocks: clock@1000000 {
|
||||
compatible = "allwinner,sun8i-a83t-de2-clk";
|
||||
reg = <0x01000000 0x100000>;
|
||||
clocks = <&ccu CLK_PLL_DE>,
|
||||
<&ccu CLK_BUS_DE>;
|
||||
clock-names = "mod",
|
||||
"bus";
|
||||
reg = <0x01000000 0x10000>;
|
||||
clocks = <&ccu CLK_BUS_DE>,
|
||||
<&ccu CLK_PLL_DE>;
|
||||
clock-names = "bus",
|
||||
"mod";
|
||||
resets = <&ccu RST_BUS_DE>;
|
||||
#clock-cells = <1>;
|
||||
#reset-cells = <1>;
|
||||
};
|
||||
|
||||
rotate: rotate@1020000 {
|
||||
compatible = "allwinner,sun8i-a83t-de2-rotate";
|
||||
reg = <0x1020000 0x10000>;
|
||||
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&display_clocks CLK_BUS_ROT>,
|
||||
<&display_clocks CLK_ROT>;
|
||||
clock-names = "bus",
|
||||
"mod";
|
||||
resets = <&display_clocks RST_ROT>;
|
||||
};
|
||||
|
||||
mixer0: mixer@1100000 {
|
||||
compatible = "allwinner,sun8i-a83t-de2-mixer-0";
|
||||
reg = <0x01100000 0x100000>;
|
||||
|
|
@ -338,6 +357,11 @@
|
|||
reg = <0>;
|
||||
remote-endpoint = <&tcon0_in_mixer0>;
|
||||
};
|
||||
|
||||
mixer0_out_tcon1: endpoint@1 {
|
||||
reg = <1>;
|
||||
remote-endpoint = <&tcon1_in_mixer0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -356,9 +380,17 @@
|
|||
#size-cells = <0>;
|
||||
|
||||
mixer1_out: port@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
|
||||
mixer1_out_tcon1: endpoint {
|
||||
mixer1_out_tcon0: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&tcon0_in_mixer1>;
|
||||
};
|
||||
|
||||
mixer1_out_tcon1: endpoint@1 {
|
||||
reg = <1>;
|
||||
remote-endpoint = <&tcon1_in_mixer1>;
|
||||
};
|
||||
};
|
||||
|
|
@ -425,6 +457,7 @@
|
|||
clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
|
||||
clock-names = "ahb", "tcon-ch0";
|
||||
clock-output-names = "tcon-pixel-clock";
|
||||
#clock-cells = <0>;
|
||||
resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
|
||||
reset-names = "lcd", "lvds";
|
||||
|
||||
|
|
@ -441,11 +474,14 @@
|
|||
reg = <0>;
|
||||
remote-endpoint = <&mixer0_out_tcon0>;
|
||||
};
|
||||
|
||||
tcon0_in_mixer1: endpoint@1 {
|
||||
reg = <1>;
|
||||
remote-endpoint = <&mixer1_out_tcon0>;
|
||||
};
|
||||
};
|
||||
|
||||
tcon0_out: port@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
|
@ -465,9 +501,17 @@
|
|||
#size-cells = <0>;
|
||||
|
||||
tcon1_in: port@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
|
||||
tcon1_in_mixer1: endpoint {
|
||||
tcon1_in_mixer0: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&mixer0_out_tcon1>;
|
||||
};
|
||||
|
||||
tcon1_in_mixer1: endpoint@1 {
|
||||
reg = <1>;
|
||||
remote-endpoint = <&mixer1_out_tcon1>;
|
||||
};
|
||||
};
|
||||
|
|
@ -549,6 +593,31 @@
|
|||
sid: eeprom@1c14000 {
|
||||
compatible = "allwinner,sun8i-a83t-sid";
|
||||
reg = <0x1c14000 0x400>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
ths_calibration: thermal-sensor-calibration@34 {
|
||||
reg = <0x34 8>;
|
||||
};
|
||||
};
|
||||
|
||||
crypto: crypto@1c15000 {
|
||||
compatible = "allwinner,sun8i-a83t-crypto";
|
||||
reg = <0x01c15000 0x1000>;
|
||||
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
|
||||
resets = <&ccu RST_BUS_SS>;
|
||||
clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>;
|
||||
clock-names = "bus", "mod";
|
||||
};
|
||||
|
||||
msgbox: mailbox@1c17000 {
|
||||
compatible = "allwinner,sun8i-a83t-msgbox",
|
||||
"allwinner,sun6i-a31-msgbox";
|
||||
reg = <0x01c17000 0x1000>;
|
||||
clocks = <&ccu CLK_BUS_MSGBOX>;
|
||||
resets = <&ccu RST_BUS_MSGBOX>;
|
||||
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#mbox-cells = <1>;
|
||||
};
|
||||
|
||||
usb_otg: usb@1c19000 {
|
||||
|
|
@ -562,6 +631,7 @@
|
|||
phys = <&usbphy 0>;
|
||||
phy-names = "usb";
|
||||
extcon = <&usbphy 0>;
|
||||
dr_mode = "otg";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
|
@ -649,6 +719,20 @@
|
|||
#interrupt-cells = <3>;
|
||||
#gpio-cells = <3>;
|
||||
|
||||
/omit-if-no-ref/
|
||||
csi_8bit_parallel_pins: csi-8bit-parallel-pins {
|
||||
pins = "PE0", "PE2", "PE3", "PE6", "PE7",
|
||||
"PE8", "PE9", "PE10", "PE11",
|
||||
"PE12", "PE13";
|
||||
function = "csi";
|
||||
};
|
||||
|
||||
/omit-if-no-ref/
|
||||
csi_mclk_pin: csi-mclk-pin {
|
||||
pins = "PE1";
|
||||
function = "csi";
|
||||
};
|
||||
|
||||
emac_rgmii_pins: emac-rgmii-pins {
|
||||
pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
|
||||
"PD11", "PD12", "PD13", "PD14", "PD18",
|
||||
|
|
@ -676,6 +760,12 @@
|
|||
function = "i2c1";
|
||||
};
|
||||
|
||||
/omit-if-no-ref/
|
||||
i2c2_pe_pins: i2c2-pe-pins {
|
||||
pins = "PE14", "PE15";
|
||||
function = "i2c2";
|
||||
};
|
||||
|
||||
i2c2_ph_pins: i2c2-ph-pins {
|
||||
pins = "PH4", "PH5";
|
||||
function = "i2c2";
|
||||
|
|
@ -747,10 +837,16 @@
|
|||
pins = "PG8", "PG9";
|
||||
function = "uart1";
|
||||
};
|
||||
|
||||
/omit-if-no-ref/
|
||||
uart2_pb_pins: uart2-pb-pins {
|
||||
pins = "PB0", "PB1";
|
||||
function = "uart2";
|
||||
};
|
||||
};
|
||||
|
||||
timer@1c20c00 {
|
||||
compatible = "allwinner,sun4i-a10-timer";
|
||||
compatible = "allwinner,sun8i-a23-timer";
|
||||
reg = <0x01c20c00 0xa0>;
|
||||
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
@ -852,6 +948,39 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
uart2: serial@1c28800 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0x01c28800 0x400>;
|
||||
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
clocks = <&ccu CLK_BUS_UART2>;
|
||||
resets = <&ccu RST_BUS_UART2>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart3: serial@1c28c00 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0x01c28c00 0x400>;
|
||||
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
clocks = <&ccu CLK_BUS_UART3>;
|
||||
resets = <&ccu RST_BUS_UART3>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart4: serial@1c29000 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0x01c29000 0x400>;
|
||||
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
clocks = <&ccu CLK_BUS_UART4>;
|
||||
resets = <&ccu RST_BUS_UART4>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c0: i2c@1c2ac00 {
|
||||
compatible = "allwinner,sun8i-a83t-i2c",
|
||||
"allwinner,sun6i-a31-i2c";
|
||||
|
|
@ -898,12 +1027,10 @@
|
|||
reg = <0x01c30000 0x104>;
|
||||
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "macirq";
|
||||
resets = <&ccu 13>;
|
||||
reset-names = "stmmaceth";
|
||||
clocks = <&ccu 27>;
|
||||
clocks = <&ccu CLK_BUS_EMAC>;
|
||||
clock-names = "stmmaceth";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
resets = <&ccu RST_BUS_EMAC>;
|
||||
reset-names = "stmmaceth";
|
||||
status = "disabled";
|
||||
|
||||
mdio: mdio {
|
||||
|
|
@ -914,7 +1041,7 @@
|
|||
};
|
||||
|
||||
gic: interrupt-controller@1c81000 {
|
||||
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
|
||||
compatible = "arm,gic-400";
|
||||
reg = <0x01c81000 0x1000>,
|
||||
<0x01c82000 0x2000>,
|
||||
<0x01c84000 0x2000>,
|
||||
|
|
@ -924,6 +1051,18 @@
|
|||
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
|
||||
};
|
||||
|
||||
csi: camera@1cb0000 {
|
||||
compatible = "allwinner,sun8i-a83t-csi";
|
||||
reg = <0x01cb0000 0x1000>;
|
||||
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&ccu CLK_BUS_CSI>,
|
||||
<&ccu CLK_CSI_SCLK>,
|
||||
<&ccu CLK_DRAM_CSI>;
|
||||
clock-names = "bus", "mod", "ram";
|
||||
resets = <&ccu RST_BUS_CSI>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
hdmi: hdmi@1ee0000 {
|
||||
compatible = "allwinner,sun8i-a83t-dw-hdmi";
|
||||
reg = <0x01ee0000 0x10000>;
|
||||
|
|
@ -935,7 +1074,7 @@
|
|||
resets = <&ccu RST_BUS_HDMI1>;
|
||||
reset-names = "ctrl";
|
||||
phys = <&hdmi_phy>;
|
||||
phy-names = "hdmi-phy";
|
||||
phy-names = "phy";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdmi_pins>;
|
||||
status = "disabled";
|
||||
|
|
@ -981,7 +1120,7 @@
|
|||
compatible = "allwinner,sun8i-a83t-r-ccu";
|
||||
reg = <0x01f01400 0x400>;
|
||||
clocks = <&osc24M>, <&osc16Md512>, <&osc16M>,
|
||||
<&ccu 6>;
|
||||
<&ccu CLK_PLL_PERIPH>;
|
||||
clock-names = "hosc", "losc", "iosc", "pll-periph";
|
||||
#clock-cells = <1>;
|
||||
#reset-cells = <1>;
|
||||
|
|
@ -992,6 +1131,26 @@
|
|||
reg = <0x1f01c00 0x400>;
|
||||
};
|
||||
|
||||
r_cir: ir@1f02000 {
|
||||
compatible = "allwinner,sun8i-a83t-ir",
|
||||
"allwinner,sun6i-a31-ir";
|
||||
clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
|
||||
clock-names = "apb", "ir";
|
||||
resets = <&r_ccu RST_APB0_IR>;
|
||||
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reg = <0x01f02000 0x400>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&r_cir_pin>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
r_lradc: lradc@1f03c00 {
|
||||
compatible = "allwinner,sun8i-a83t-r-lradc";
|
||||
reg = <0x01f03c00 0x100>;
|
||||
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
r_pio: pinctrl@1f02c00 {
|
||||
compatible = "allwinner,sun8i-a83t-r-pinctrl";
|
||||
reg = <0x01f02c00 0x400>;
|
||||
|
|
@ -1004,6 +1163,11 @@
|
|||
interrupt-controller;
|
||||
#interrupt-cells = <3>;
|
||||
|
||||
r_cir_pin: r-cir-pin {
|
||||
pins = "PL12";
|
||||
function = "s_cir_rx";
|
||||
};
|
||||
|
||||
r_rsb_pins: r-rsb-pins {
|
||||
pins = "PL0", "PL1";
|
||||
function = "s_rsb";
|
||||
|
|
@ -1026,5 +1190,82 @@
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
ths: thermal-sensor@1f04000 {
|
||||
compatible = "allwinner,sun8i-a83t-ths";
|
||||
reg = <0x01f04000 0x100>;
|
||||
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
|
||||
nvmem-cells = <&ths_calibration>;
|
||||
nvmem-cell-names = "calibration";
|
||||
#thermal-sensor-cells = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
thermal-zones {
|
||||
cpu0_thermal: cpu0-thermal {
|
||||
polling-delay-passive = <0>;
|
||||
polling-delay = <0>;
|
||||
thermal-sensors = <&ths 0>;
|
||||
|
||||
trips {
|
||||
cpu0_hot: cpu-hot {
|
||||
temperature = <80000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
cpu0_very_hot: cpu-very-hot {
|
||||
temperature = <100000>;
|
||||
hysteresis = <0>;
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
|
||||
cooling-maps {
|
||||
cpu-hot-limit {
|
||||
trip = <&cpu0_hot>;
|
||||
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
cpu1_thermal: cpu1-thermal {
|
||||
polling-delay-passive = <0>;
|
||||
polling-delay = <0>;
|
||||
thermal-sensors = <&ths 1>;
|
||||
|
||||
trips {
|
||||
cpu1_hot: cpu-hot {
|
||||
temperature = <80000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
cpu1_very_hot: cpu-very-hot {
|
||||
temperature = <100000>;
|
||||
hysteresis = <0>;
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
|
||||
cooling-maps {
|
||||
cpu-hot-limit {
|
||||
trip = <&cpu1_hot>;
|
||||
cooling-device = <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||
<&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||
<&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||
<&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gpu_thermal: gpu-thermal {
|
||||
polling-delay-passive = <0>;
|
||||
polling-delay = <0>;
|
||||
thermal-sensors = <&ths 2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
Loading…
Reference in a new issue