Convert CONFIG_SYS_LOADS_BAUD_CHANGE et al to Kconfig

This converts the following to Kconfig:
   CONFIG_SYS_LOADS_BAUD_CHANGE
   CONFIG_LOADS_ECHO

As part of this, we move CMD_SAVES to be after CMD_LOADS as they are
logically related (load or save an s-record format file) and this makes
grouping of CONFIG_SYS_LOADS_BAUD_CHANGE easier.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

README

@@ -435,15 +435,6 @@ The following options need to be configured:
 		Define this variable to enable hw flow control in serial driver.
 		Current user of this option is drivers/serial/nsl16550.c driver
 
-- Serial Download Echo Mode:
-		CONFIG_LOADS_ECHO
-		If defined to 1, all characters received during a
-		serial download (using the "loads" command) are
-		echoed back. This might be needed by some terminal
-		emulations (like "cu"), but may as well just take
-		time on others. This setting #define's the initial
-		value of the "loads_echo" environment variable.
-
 - Removal of commands
 		If no commands are needed to boot, you can disable
 		CONFIG_CMDLINE to remove them. In this case, the command line
@@ -1455,9 +1446,6 @@ Configuration Settings:
 		the RAM base is not zero, or RAM is divided into banks,
 		this variable needs to be recalcuated to get the address.
 
-- CONFIG_SYS_LOADS_BAUD_CHANGE:
-		Enable temporary baudrate change while serial download
-
 - CONFIG_SYS_SDRAM_BASE:
 		Physical start address of SDRAM. _Must_ be 0 here.
 

cmd/Kconfig

@@ -1200,11 +1200,31 @@ config CMD_LOADM
 	  Load a binary over memory mapped.
 
 config CMD_LOADS
-	bool "loads"
+	bool "loads - Load a file over serial in S-Record format"
 	default y
 	help
 	  Load an S-Record file over serial line
 
+config LOADS_ECHO
+	bool "Echo all characters received during a loads back to console"
+	depends on CMD_LOADS
+	help
+	  If enabled, all characters received during a serial download (using
+	  the "loads" command) are echoed back. This might be needed by some
+	  terminal emulations (like "cu"), but may as well just take time on
+	  others. This sets the initial value of the "loads_echo" environment
+	  variable to 1.
+
+config CMD_SAVES
+	bool "saves - Save a file over serial in S-Record format"
+	help
+	  Provides a way to save a binary file using the Motorola S-Record
+	  format over the serial line.
+
+config SYS_LOADS_BAUD_CHANGE
+	bool "Enable a temporary baudrate change during loads/saves command"
+	depends on CMD_LOADS || CMD_SAVES
+
 config CMD_LOADXY_TIMEOUT
 	int "loadxy_timeout"
 	range 0 2000
@@ -1404,12 +1424,6 @@ config CMD_SATA
 	  Attachment, where AT refers to an IBM AT (Advanced Technology)
 	  computer released in 1984.
 
-config CMD_SAVES
-	bool "saves - Save a file over serial in S-Record format"
-	help
-	  Provides a way to save a binary file using the Motorola S-Record
-	  format over the serial line.
-
 config CMD_SCSI
 	bool "scsi - Access to SCSI devices"
 	default y if SCSI

configs/MPC837XERDB_defconfig

@@ -157,6 +157,8 @@ CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PBSIZE=276
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_PCI=y
 CONFIG_CMD_SATA=y

configs/MPC8548CDS_36BIT_defconfig

@@ -28,6 +28,8 @@ CONFIG_SYS_PBSIZE=276
 CONFIG_CMD_IMLS=y
 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_PCI=y
 CONFIG_CMD_DHCP=y
 CONFIG_BOOTP_BOOTFILESIZE=y

configs/MPC8548CDS_defconfig

@@ -27,6 +27,8 @@ CONFIG_SYS_PBSIZE=276
 CONFIG_CMD_IMLS=y
 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_PCI=y
 CONFIG_CMD_DHCP=y
 CONFIG_BOOTP_BOOTFILESIZE=y

configs/MPC8548CDS_legacy_defconfig

@@ -28,6 +28,8 @@ CONFIG_SYS_PBSIZE=276
 CONFIG_CMD_IMLS=y
 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_PCI=y
 CONFIG_BOOTP_BOOTFILESIZE=y
 CONFIG_CMD_MII=y

configs/P1010RDB-PA_36BIT_NAND_defconfig

@@ -61,6 +61,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_MII=y

configs/P1010RDB-PA_36BIT_NOR_defconfig

@@ -31,6 +31,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_MII=y

configs/P1010RDB-PA_36BIT_SDCARD_defconfig

@@ -52,6 +52,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_MII=y

configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig

@@ -54,6 +54,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_MII=y

configs/P1010RDB-PA_NAND_defconfig

@@ -60,6 +60,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_MII=y

configs/P1010RDB-PA_NOR_defconfig

@@ -30,6 +30,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_MII=y

configs/P1010RDB-PA_SDCARD_defconfig

@@ -51,6 +51,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_MII=y

configs/P1010RDB-PA_SPIFLASH_defconfig

@@ -53,6 +53,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_MII=y

configs/P1010RDB-PB_36BIT_NAND_defconfig

@@ -62,6 +62,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_MII=y

configs/P1010RDB-PB_36BIT_NOR_defconfig

@@ -32,6 +32,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_MII=y

configs/P1010RDB-PB_36BIT_SDCARD_defconfig

@@ -53,6 +53,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_MII=y

configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig

@@ -55,6 +55,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_MII=y

configs/P1010RDB-PB_NAND_defconfig

@@ -61,6 +61,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_MII=y

configs/P1010RDB-PB_NOR_defconfig

@@ -31,6 +31,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_MII=y

configs/P1010RDB-PB_SDCARD_defconfig

@@ -52,6 +52,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_MII=y

configs/P1010RDB-PB_SPIFLASH_defconfig

@@ -54,6 +54,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_MII=y

configs/P1020RDB-PC_36BIT_NAND_defconfig

@@ -62,6 +62,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_MII=y

configs/P1020RDB-PC_36BIT_SDCARD_defconfig

@@ -54,6 +54,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_MII=y

configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig

@@ -56,6 +56,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_MII=y

configs/P1020RDB-PC_36BIT_defconfig

@@ -34,6 +34,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_MII=y

configs/P1020RDB-PC_NAND_defconfig

@@ -61,6 +61,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_MII=y

configs/P1020RDB-PC_SDCARD_defconfig

@@ -53,6 +53,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_MII=y

configs/P1020RDB-PC_SPIFLASH_defconfig

@@ -55,6 +55,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_MII=y

configs/P1020RDB-PC_defconfig

@@ -33,6 +33,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_MII=y

configs/P1020RDB-PD_NAND_defconfig

@@ -61,6 +61,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_MII=y

configs/P1020RDB-PD_SDCARD_defconfig

@@ -53,6 +53,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_MII=y

configs/P1020RDB-PD_SPIFLASH_defconfig

@@ -55,6 +55,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_MII=y

configs/P1020RDB-PD_defconfig

@@ -33,6 +33,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_MII=y

configs/P2020RDB-PC_36BIT_NAND_defconfig

@@ -62,6 +62,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y

configs/P2020RDB-PC_36BIT_SDCARD_defconfig

@@ -54,6 +54,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y

configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig

@@ -56,6 +56,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y

configs/P2020RDB-PC_36BIT_defconfig

@@ -34,6 +34,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y

configs/P2020RDB-PC_NAND_defconfig

@@ -61,6 +61,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y

configs/P2020RDB-PC_SDCARD_defconfig

@@ -53,6 +53,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y

configs/P2020RDB-PC_SPIFLASH_defconfig

@@ -55,6 +55,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y

configs/P2020RDB-PC_defconfig

@@ -33,6 +33,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y

configs/P2041RDB_NAND_defconfig

@@ -38,6 +38,8 @@ CONFIG_CMD_GREPENV=y
 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
 CONFIG_CMD_DM=y
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y

configs/P2041RDB_SDCARD_defconfig

@@ -38,6 +38,8 @@ CONFIG_CMD_GREPENV=y
 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
 CONFIG_CMD_DM=y
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y

configs/P2041RDB_SPIFLASH_defconfig

@@ -40,6 +40,8 @@ CONFIG_CMD_GREPENV=y
 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
 CONFIG_CMD_DM=y
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y

configs/P2041RDB_defconfig

@@ -36,6 +36,8 @@ CONFIG_CMD_GREPENV=y
 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
 CONFIG_CMD_DM=y
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y

configs/T1024RDB_NAND_defconfig

@@ -68,6 +68,8 @@ CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_ALT_MEMTEST=y
 CONFIG_CMD_DM=y
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y

configs/T1024RDB_SDCARD_defconfig

@@ -67,6 +67,8 @@ CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_ALT_MEMTEST=y
 CONFIG_CMD_DM=y
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y

configs/T1024RDB_SPIFLASH_defconfig

@@ -70,6 +70,8 @@ CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_ALT_MEMTEST=y
 CONFIG_CMD_DM=y
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y

configs/T1024RDB_defconfig

@@ -42,6 +42,8 @@ CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_ALT_MEMTEST=y
 CONFIG_CMD_DM=y
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y

configs/T1042D4RDB_NAND_defconfig

@@ -61,6 +61,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_DM=y
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y

configs/T1042D4RDB_SDCARD_defconfig

@@ -60,6 +60,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_DM=y
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y

configs/T1042D4RDB_SPIFLASH_defconfig

@@ -63,6 +63,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_DM=y
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y

configs/T1042D4RDB_defconfig

@@ -35,6 +35,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_DM=y
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y

configs/T2080QDS_NAND_defconfig

@@ -65,6 +65,8 @@ CONFIG_SYS_PBSIZE=276
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y

configs/T2080QDS_SDCARD_defconfig

@@ -64,6 +64,8 @@ CONFIG_SYS_PBSIZE=276
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y

configs/T2080QDS_SECURE_BOOT_defconfig

@@ -39,6 +39,8 @@ CONFIG_SYS_PBSIZE=276
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y

configs/T2080QDS_SPIFLASH_defconfig

@@ -67,6 +67,8 @@ CONFIG_SYS_PBSIZE=276
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y

configs/T2080QDS_SRIO_PCIE_BOOT_defconfig

@@ -39,6 +39,8 @@ CONFIG_SYS_PBSIZE=276
 CONFIG_CMD_GREPENV=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y

configs/T2080QDS_defconfig

@@ -39,6 +39,8 @@ CONFIG_SYS_PBSIZE=276
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y

configs/T4240RDB_SDCARD_defconfig

@@ -61,6 +61,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_DM=y
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y

configs/T4240RDB_defconfig

@@ -36,6 +36,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_DM=y
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y

configs/gazerbeam_defconfig

@@ -140,6 +140,8 @@ CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_ALT_MEMTEST=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_AXI=y
 # CONFIG_CMD_SETEXPR is not set

configs/kmcent2_defconfig

@@ -35,6 +35,8 @@ CONFIG_SYS_CBSIZE=512
 CONFIG_SYS_PBSIZE=532
 CONFIG_CMD_DM=y
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_MTD=y
 CONFIG_CMD_NAND_TRIMFFS=y

configs/kmcoge5ne_defconfig

@@ -181,6 +181,8 @@ CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_NAND=y
 # CONFIG_CMD_PINMUX is not set
 CONFIG_CMD_DHCP=y

configs/kmeter1_defconfig

@@ -151,6 +151,8 @@ CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 # CONFIG_CMD_PINMUX is not set
 CONFIG_CMD_DHCP=y
 CONFIG_BOOTP_BOOTFILESIZE=y

configs/kmopti2_defconfig

@@ -163,6 +163,8 @@ CONFIG_CMD_EEPROM=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 # CONFIG_CMD_PINMUX is not set
 CONFIG_CMD_DHCP=y
 CONFIG_BOOTP_BOOTFILESIZE=y

configs/kmsupx5_defconfig

@@ -143,6 +143,8 @@ CONFIG_CMD_EEPROM=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_DHCP=y
 CONFIG_BOOTP_BOOTFILESIZE=y
 CONFIG_CMD_MII=y

configs/kmtepr2_defconfig

@@ -163,6 +163,8 @@ CONFIG_CMD_EEPROM=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_DHCP=y
 CONFIG_BOOTP_BOOTFILESIZE=y
 CONFIG_CMD_MII=y

configs/pg_wcom_expu1_defconfig

@@ -52,6 +52,8 @@ CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_NAND=y
 CONFIG_CMD_NAND_TRIMFFS=y
 CONFIG_BOOTP_BOOTFILESIZE=y

configs/pg_wcom_expu1_update_defconfig

@@ -50,6 +50,8 @@ CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_NAND=y
 CONFIG_CMD_NAND_TRIMFFS=y
 CONFIG_BOOTP_BOOTFILESIZE=y

configs/pg_wcom_seli8_defconfig

@@ -52,6 +52,8 @@ CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_NAND=y
 CONFIG_CMD_NAND_TRIMFFS=y
 CONFIG_BOOTP_BOOTFILESIZE=y

configs/pg_wcom_seli8_update_defconfig

@@ -50,6 +50,8 @@ CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_NAND=y
 CONFIG_CMD_NAND_TRIMFFS=y
 CONFIG_BOOTP_BOOTFILESIZE=y

configs/qemu-ppce500_defconfig

@@ -24,6 +24,7 @@ CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_DM=y
 CONFIG_CMD_GPIO=y
+CONFIG_LOADS_ECHO=y
 CONFIG_CMD_PCI=y
 CONFIG_CMD_POWEROFF=y
 CONFIG_CMD_DHCP=y

configs/socrates_defconfig

@@ -33,6 +33,8 @@ CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_DM=y
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_NAND=y
 CONFIG_CMD_PCI=y
 CONFIG_CMD_SDRAM=y

configs/tuge1_defconfig

@@ -143,6 +143,8 @@ CONFIG_CMD_EEPROM=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_DHCP=y
 CONFIG_BOOTP_BOOTFILESIZE=y
 CONFIG_CMD_MII=y

configs/tuxx1_defconfig

@@ -165,6 +165,8 @@ CONFIG_CMD_EEPROM=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_DHCP=y
 CONFIG_BOOTP_BOOTFILESIZE=y
 CONFIG_CMD_MII=y

include/configs/MCR3000.h

@@ -56,8 +56,6 @@
 #define CONFIG_SERVERIP			192.168.0.1
 #define CONFIG_NETMASK			255.0.0.0
 
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-
 /* Miscellaneous configurable options */
 
 /* Definitions for initial stack pointer and data area (in DPRAM) */

include/configs/MPC837XERDB.h

@@ -216,13 +216,6 @@
 #endif
 #endif
 
-/*
- * Environment
- */
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
-
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC_PIN_MUX
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC83xx_ESDHC_ADDR

include/configs/MPC8548CDS.h

@@ -329,13 +329,6 @@
 #define TSEC4_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
 #endif	/* CONFIG_TSEC_ENET */
 
-/*
- * Environment
- */
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
-
 /*
  * Miscellaneous configurable options
  */

include/configs/P1010RDB.h

@@ -407,9 +407,6 @@ extern unsigned long get_sdram_size(void);
 #endif
 #endif
 
-#define CONFIG_LOADS_ECHO		/* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */
-
 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI_HCD) \
 		 || defined(CONFIG_FSL_SATA)
 #endif

include/configs/P2041RDB.h

@@ -310,12 +310,6 @@
 #define CONFIG_SYS_TBIPA_VALUE	8
 #endif
 
-/*
- * Environment
- */
-#define CONFIG_LOADS_ECHO		/* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */
-
 #ifdef CONFIG_MMC
 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #endif

include/configs/T102xRDB.h

@@ -426,12 +426,6 @@
  * Dynamic MTD Partition support with mtdparts
  */
 
-/*
- * Environment
- */
-#define CONFIG_LOADS_ECHO		/* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */
-
 /*
  * Miscellaneous configurable options
  */

include/configs/T104xRDB.h

@@ -415,12 +415,6 @@
 #endif
 #endif
 
-/*
- * Environment
- */
-#define CONFIG_LOADS_ECHO		/* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */
-
 /*
  * Miscellaneous configurable options
  */

include/configs/T208xQDS.h

@@ -431,12 +431,6 @@
  * Dynamic MTD Partition support with mtdparts
  */
 
-/*
- * Environment
- */
-#define CONFIG_LOADS_ECHO	/* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */
-
 /*
  * Miscellaneous configurable options
  */

include/configs/T4240RDB.h

@@ -133,12 +133,6 @@
 #define CONFIG_SYS_PCIE4_MEM_PHYS	0xc60000000ull
 #define CONFIG_SYS_PCIE4_IO_PHYS	0xff8030000ull
 
-/*
- * Environment
- */
-#define CONFIG_LOADS_ECHO		/* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */
-
 /*
  * Miscellaneous configurable options
  */

include/configs/blanche.h

@@ -21,8 +21,6 @@
 #define RCAR_GEN2_SDRAM_SIZE		(1024u * 1024 * 1024)
 #define RCAR_GEN2_UBOOT_SDRAM_SIZE	(512 * 1024 * 1024)
 
-#undef	CONFIG_SYS_LOADS_BAUD_CHANGE
-
 /* FLASH */
 #if !defined(CONFIG_MTD_NOR_FLASH)
 #define CONFIG_SH_QSPI_BASE	0xE6B10000

include/configs/gazerbeam.h

@@ -42,13 +42,6 @@
 #define CONFIG_SYS_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 
-/*
- * Environment
- */
-
-#define CONFIG_LOADS_ECHO		/* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */
-
 /*
  * Miscellaneous configurable options
  */

include/configs/km/keymile-common.h

@@ -15,9 +15,6 @@
 
 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
 
-#define CONFIG_LOADS_ECHO
-#define CONFIG_SYS_LOADS_BAUD_CHANGE
-
 #ifndef CONFIG_KM_DEF_ENV_BOOTPARAMS
 #define CONFIG_KM_DEF_ENV_BOOTPARAMS \
 	"actual_bank=0\0"

include/configs/p1_p2_rdb_pc.h

@@ -415,9 +415,6 @@
 #endif
 #endif
 
-#define CONFIG_LOADS_ECHO		/* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */
-
 /*
  * USB
  */

include/configs/qemu-ppce500.h

@@ -51,12 +51,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
 /* RTC */
 #define CONFIG_RTC_PT7C4338
 
-/*
- * Environment
- */
-
-#define CONFIG_LOADS_ECHO		/* echo on for serial download */
-
 /*
  * Miscellaneous configurable options
  */

include/configs/socrates.h

@@ -135,13 +135,6 @@
 
 /* Options are: TSEC[0,1] */
 
-/*
- * Environment
- */
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
-
 /*
  * Miscellaneous configurable options
  */