sunxi: boards: Enable SPI flash support in U-Boot proper

Some sunxi boards ship with SPI flash, which allows booting through the
BootROM. We cover this functionality by a separate SPL "mini" driver.
Separately we have a proper DM_SPI driver for U-Boot proper, which
provides access to the SPI flash through the "sf" command. That allows
to update the firmware on the SPI flash, also to store the environment
there.

However only very few boards actually enable support for U-Boot proper,
even though that would work and the SPL part is configured.

Use the cleaned up configuration scheme to enable SPI flash on those
boards which mention a SPI flash in their .dts, or which use the SPL SPI
support.

Out of the box this would enable storing the environment on the SPI
flash, and allows people to read or write the flash from U-Boot, for
instance to update the SPI flash when booted via an SD card.

For this to actually work there must be a "spi0" alias in the DT, which
most boards are missing. But this should be addressed separately.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
This commit is contained in:
Andre Przywara 2022-01-11 12:46:06 +00:00 committed by Jagan Teki
parent 753a85fd15
commit 280294c5df
8 changed files with 14 additions and 0 deletions

View file

@ -11,9 +11,11 @@ CONFIG_SPL_SPI_SUNXI=y
CONFIG_SPL_I2C=y
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SUN8I_EMAC=y
CONFIG_SY8106A_POWER=y
CONFIG_SY8106A_VOUT1_VOLT=1100
CONFIG_SPI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_MUSB_GADGET=y

View file

@ -8,6 +8,8 @@ CONFIG_DRAM_CLK=624
CONFIG_SPL_SPI_SUNXI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_CONSOLE_MUX=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SUN8I_EMAC=y
CONFIG_SPI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y

View file

@ -7,6 +7,7 @@ CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
CONFIG_MACPWR="PD14"
CONFIG_SPL_SPI_SUNXI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_PHY_REALTEK=y
CONFIG_SUN8I_EMAC=y
CONFIG_SPI=y

View file

@ -15,5 +15,7 @@ CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_PHY_REALTEK=y
CONFIG_SUN8I_EMAC=y
CONFIG_SPI=y

View file

@ -8,6 +8,8 @@ CONFIG_DRAM_CLK=624
CONFIG_SPL_SPI_SUNXI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_CONSOLE_MUX=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SUN8I_EMAC=y
CONFIG_SPI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y

View file

@ -10,6 +10,7 @@ CONFIG_MMC0_CD_PIN=""
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_SPL_SPI_SUNXI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SUN8I_EMAC=y
CONFIG_SPI=y
CONFIG_USB_EHCI_HCD=y

View file

@ -11,8 +11,10 @@ CONFIG_USB3_VBUS_PIN="PL5"
CONFIG_SPL_SPI_SUNXI=y
# CONFIG_PSCI_RESET is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SUN8I_EMAC=y
CONFIG_PHY_SUN50I_USB3=y
CONFIG_SPI=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_EHCI_HCD=y

View file

@ -12,8 +12,10 @@ CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_SPI_FLASH_WINBOND=y
# CONFIG_NETDEVICES is not set
CONFIG_AXP209_POWER=y
CONFIG_AXP_DCDC2_VOLT=1250
CONFIG_AXP_DCDC3_VOLT=3300
CONFIG_CONS_INDEX=3
CONFIG_SPI=y