diff --git a/board/solidrun/clearfog/Kconfig b/board/solidrun/clearfog/Kconfig index 60d3921307..b1623038d0 100644 --- a/board/solidrun/clearfog/Kconfig +++ b/board/solidrun/clearfog/Kconfig @@ -39,6 +39,25 @@ config CLEARFOG_SFP_25GB SGMII connection (requires a supporting SFP). By default, transfer speed of 1.25 Gbps is used, suitable for a more common 1 Gbps SFP module. +choice CLEARFOG_GTR_SERDES0 + prompt "Select Clearfog GTR SerDes 0 Function" + default CLEARFOG_GTR_SERDES0_PCIE + help + Select function for SerDes 0 which is shared between CON3 and CON18 + for either pci-e or sata. + +config CLEARFOG_GTR_SERDES0_PCIE + bool "PCI-E on CON3" + help + Configure SerDes 0 for PCI-E to enable CON3 mini-PCI-E connector. + +config CLEARFOG_GTR_SERDES0_SATA + bool "SATA on CON18" + help + Configure SerDes 0 for SATA to enable CON18 SATA connector. + +endchoice + config ENV_SIZE hex "Environment Size" default 0x10000 diff --git a/board/solidrun/clearfog/clearfog.c b/board/solidrun/clearfog/clearfog.c index 6fa2fe5fe3..51c5be518a 100644 --- a/board/solidrun/clearfog/clearfog.c +++ b/board/solidrun/clearfog/clearfog.c @@ -90,9 +90,14 @@ int hws_board_topology_load(struct serdes_map **serdes_map_array, u8 *count) /* Apply runtime detection changes */ if (sr_product_is(&cf_tlv_data, "Clearfog GTR")) { - board_serdes_map[0].serdes_type = PEX0; - board_serdes_map[0].serdes_speed = SERDES_SPEED_5_GBPS; - board_serdes_map[0].serdes_mode = PEX_ROOT_COMPLEX_X1; + if (IS_ENABLED(CONFIG_CLEARFOG_GTR_SERDES0_SATA)) { + /* serdes 0 is sata (like clearfog pro) */ + } else if (IS_ENABLED(CONFIG_CLEARFOG_GTR_SERDES0_PCIE)) { + /* serdes 0 is pci */ + board_serdes_map[0].serdes_type = PEX0; + board_serdes_map[0].serdes_speed = SERDES_SPEED_5_GBPS; + board_serdes_map[0].serdes_mode = PEX_ROOT_COMPLEX_X1; + } } else if (sr_product_is(&cf_tlv_data, "Clearfog Pro")) { /* handle recognized product as noop, no adjustment required */ } else if (sr_product_is(&cf_tlv_data, "Clearfog Base")) {