From 25e4ff45b17dfb21dedc03b0cf654d83c0fd33fa Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Sun, 30 Jun 2019 17:30:49 -0500 Subject: [PATCH] ARM: omap3_logic: Enable OMAP EHCI support for SOM-LV Boards The SOM-LV boards support the OMAP EHCI driver using port 2. With the driver updated to support device tree, this patch sets the corresponding pin muxing for the tranceiver as well as the reset pin. Signed-off-by: Adam Ford --- board/logicpd/omap3som/omap3logic.h | 19 +++++++++++++++++++ include/configs/omap3_logic.h | 4 ++++ 2 files changed, 23 insertions(+) diff --git a/board/logicpd/omap3som/omap3logic.h b/board/logicpd/omap3som/omap3logic.h index aeb26b90d7..63c2141783 100644 --- a/board/logicpd/omap3som/omap3logic.h +++ b/board/logicpd/omap3som/omap3logic.h @@ -161,12 +161,14 @@ void set_muxconf_regs(void) MUX_VAL(CP(ETK_D7_ES2), (IEN | PTD | DIS | M0)); /*ETK_D7*/ MUX_VAL(CP(ETK_D8_ES2), (IEN | PTD | DIS | M0)); /*ETK_D8*/ MUX_VAL(CP(ETK_D9_ES2), (IEN | PTD | DIS | M0)); /*ETK_D9*/ +#ifndef CONFIG_USB_EHCI_OMAP /* Torpedo does not use EHCI_OMAP */ MUX_VAL(CP(ETK_D10_ES2), (IEN | PTD | DIS | M0)); /*ETK_D10*/ MUX_VAL(CP(ETK_D11_ES2), (IEN | PTD | DIS | M0)); /*ETK_D11*/ MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | DIS | M0)); /*ETK_D12*/ MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | DIS | M0)); /*ETK_D13*/ MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | DIS | M0)); /*ETK_D14*/ MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | DIS | M0)); /*ETK_D15*/ +#endif MUX_VAL(CP(D2D_MCAD1), (IEN | PTD | EN | M0)); /*d2d_mcad1*/ MUX_VAL(CP(D2D_MCAD2), (IEN | PTD | EN | M0)); /*d2d_mcad2*/ @@ -231,6 +233,23 @@ void set_muxconf_regs(void) MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)); /*d2d_sread*/ MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)); /*d2d_mbusflag*/ MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)); /*d2d_sbusflag*/ + +#ifdef CONFIG_USB_EHCI_OMAP /* SOM-LV Uses EHCI-OMAP */ + MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | DIS | M3)); /*HSUSB2_DATA0*/ + MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | DIS | M3)); /*HSUSB2_DATA1*/ + MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | EN | M0)); /*HSUSB2_DATA2*/ + MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | EN | M0)); /*HSUSB2_DATA3*/ + MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | DIS | M0)); /*HSUSB2_DATA4*/ + MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | DIS | M0)); /*HSUSB2_DATA5*/ + MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M0)); /*HSUSB2_DATA6*/ + MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | DIS | M0)); /*HSUSB2_DATA7*/ + MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /* GPIO_4 */ + MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTU | DIS | M3)); /*HSUSB2_CLK*/ + MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTU | DIS | M3)); /*HSUSB2_STP*/ + MUX_VAL(CP(ETK_D12_ES2), (IEN | PTU | DIS | M3)); /*HSUSB2_DIR*/ + MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | DIS | M3)); /*HSUSB2_NXT*/ +#endif + } #endif diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index 6b7104db5f..1fbd371a50 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -30,6 +30,10 @@ /* I2C */ #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM AT24C64 */ +#ifdef CONFIG_USB_EHCI_OMAP +#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 4 +#endif + /* Board NAND Info. */ #ifdef CONFIG_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */