From 188c803d08c6f1744484de6663f7c5d31ef71cfe Mon Sep 17 00:00:00 2001 From: Venkatesh Yadav Abbarapu Date: Tue, 3 Oct 2023 08:47:13 +0530 Subject: [PATCH] mtd: spi-nor: Add spi flash lock config option Provide an explicit configuration option to disable default "lock" of any flash chip which supports locking. By disabling the lock config will save some amount of memory and also don't expose the lock functionality to the users i.e., via sf protect command. Signed-off-by: Venkatesh Yadav Abbarapu Link: https://lore.kernel.org/r/20231003031715.5343-2-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek --- cmd/sf.c | 4 +++- drivers/mtd/spi/Kconfig | 7 +++++++ drivers/mtd/spi/spi-nor-core.c | 8 +++++++- 3 files changed, 17 insertions(+), 2 deletions(-) diff --git a/cmd/sf.c b/cmd/sf.c index 30b2bd5ef6..730996c02b 100644 --- a/cmd/sf.c +++ b/cmd/sf.c @@ -604,7 +604,7 @@ static int do_spi_flash(struct cmd_tbl *cmdtp, int flag, int argc, ret = do_spi_flash_read_write(argc, argv); else if (strcmp(cmd, "erase") == 0) ret = do_spi_flash_erase(argc, argv); - else if (strcmp(cmd, "protect") == 0) + else if (IS_ENABLED(CONFIG_SPI_FLASH_LOCK) && strcmp(cmd, "protect") == 0) ret = do_spi_protect(argc, argv); else if (IS_ENABLED(CONFIG_CMD_SF_TEST) && !strcmp(cmd, "test")) ret = do_spi_flash_test(argc, argv); @@ -629,8 +629,10 @@ U_BOOT_LONGHELP(sf, "sf update addr offset|partition len - erase and write `len' bytes from memory\n" " at `addr' to flash at `offset'\n" " or to start of mtd `partition'\n" +#ifdef CONFIG_SPI_FLASH_LOCK "sf protect lock/unlock sector len - protect/unprotect 'len' bytes starting\n" " at address 'sector'" +#endif #ifdef CONFIG_CMD_SF_TEST "\nsf test offset len - run a very basic destructive test" #endif diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig index 2b2efc8531..732b076045 100644 --- a/drivers/mtd/spi/Kconfig +++ b/drivers/mtd/spi/Kconfig @@ -134,6 +134,13 @@ config SPI_FLASH_BAR Bank/Extended address registers are used to access the flash which has size > 16MiB in 3-byte addressing. +config SPI_FLASH_LOCK + bool "Enable the Locking feature" + default y + help + Enable the SPI flash lock support. By default this is set to y. + If you intend not to use the lock support you should say n here. + config SPI_FLASH_UNLOCK_ALL bool "Unlock the entire SPI flash on u-boot startup" default y diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c index db20feb4da..9a1801ba93 100644 --- a/drivers/mtd/spi/spi-nor-core.c +++ b/drivers/mtd/spi/spi-nor-core.c @@ -1100,6 +1100,7 @@ static int spansion_erase_non_uniform(struct spi_nor *nor, u32 addr, } #endif +#if defined(CONFIG_SPI_FLASH_LOCK) #if defined(CONFIG_SPI_FLASH_STMICRO) || defined(CONFIG_SPI_FLASH_SST) /* Write status register and ensure bits in mask match written values */ static int write_sr_and_check(struct spi_nor *nor, u8 status_new, u8 mask) @@ -1387,6 +1388,7 @@ static int stm_is_unlocked(struct spi_nor *nor, loff_t ofs, uint64_t len) return stm_is_unlocked_sr(nor, ofs, len, status); } #endif /* CONFIG_SPI_FLASH_STMICRO */ +#endif static const struct flash_info *spi_nor_read_id(struct spi_nor *nor) { @@ -1462,6 +1464,7 @@ read_err: return ret; } +#if defined(CONFIG_SPI_FLASH_LOCK) #ifdef CONFIG_SPI_FLASH_SST /* * sst26 flash series has its own block protection implementation: @@ -1730,6 +1733,8 @@ sst_write_err: return ret; } #endif +#endif + /* * Write an address range to the nor chip. Data must be written in * FLASH_PAGESIZE chunks. The address range may be any size provided @@ -4104,6 +4109,7 @@ int spi_nor_scan(struct spi_nor *nor) mtd->_read = spi_nor_read; mtd->_write = spi_nor_write; +#if defined(CONFIG_SPI_FLASH_LOCK) #if defined(CONFIG_SPI_FLASH_STMICRO) || defined(CONFIG_SPI_FLASH_SST) /* NOR protection support for STmicro/Micron chips and similar */ if (JEDEC_MFR(info) == SNOR_MFR_ST || @@ -4127,7 +4133,7 @@ int spi_nor_scan(struct spi_nor *nor) nor->flash_is_unlocked = sst26_is_unlocked; } #endif - +#endif if (info->flags & USE_FSR) nor->flags |= SNOR_F_USE_FSR; if (info->flags & SPI_NOR_HAS_TB)