Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-29 08:01:08 +00:00
Code Issues Projects Releases Packages Wiki Activity

msm_serial: Read bit rate register value from DT

Browse source 
IPQ40xx and currently supported Snapdragon boards don't use the same one
so enable reading it from DT, if no DT property is found default value
is the same as the previous define.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-By: Ramon Fried <rfried.dev@gmail.com>
This commit is contained in:
Robert Marko 2020-07-06 10:37:55 +02:00 committed by Tom Rini
parent e479a7d52e
commit 185dcf7f56
2 changed files with 9 additions and 1 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

4
doc/device-tree-bindings/serial/msm-serial.txt
View file

@ -4,3 +4,7 @@ Required properties:
- compatible: must be "qcom,msm-uartdm-v1.4" - compatible: must be "qcom,msm-uartdm-v1.4"
- reg: start address and size of the registers - reg: start address and size of the registers
- clock: interface clock (must accept baudrate as a frequency) - clock: interface clock (must accept baudrate as a frequency)
Optional properties:
- bit-rate: Data Mover bit rate register value
(If not defined then 0xCC is used as default)

6
drivers/serial/serial_msm.c
View file

@ -61,6 +61,7 @@ struct msm_serial_data {
phys_addr_t base; phys_addr_t base;
unsigned chars_cnt; /* number of buffered chars */ unsigned chars_cnt; /* number of buffered chars */
uint32_t chars_buf; /* buffered chars */ uint32_t chars_buf; /* buffered chars */
uint32_t clk_bit_rate; /* data mover mode bit rate register value */
}; };
static int msm_serial_fetch(struct udevice *dev) static int msm_serial_fetch(struct udevice *dev)
@ -190,7 +191,7 @@ static int msm_uart_clk_init(struct udevice *dev)
static void uart_dm_init(struct msm_serial_data *priv) static void uart_dm_init(struct msm_serial_data *priv)
{ {
writel(UART_DM_CLK_RX_TX_BIT_RATE, priv->base + UARTDM_CSR); writel(priv->clk_bit_rate, priv->base + UARTDM_CSR);
writel(0x0, priv->base + UARTDM_MR1); writel(0x0, priv->base + UARTDM_MR1);
writel(MSM_BOOT_UART_DM_8_N_1_MODE, priv->base + UARTDM_MR2); writel(MSM_BOOT_UART_DM_8_N_1_MODE, priv->base + UARTDM_MR2);
writel(MSM_BOOT_UART_DM_CMD_RESET_RX, priv->base + UARTDM_CR); writel(MSM_BOOT_UART_DM_CMD_RESET_RX, priv->base + UARTDM_CR);
@ -223,6 +224,9 @@ static int msm_serial_ofdata_to_platdata(struct udevice *dev)
if (priv->base == FDT_ADDR_T_NONE) if (priv->base == FDT_ADDR_T_NONE)
return -EINVAL; return -EINVAL;
priv->clk_bit_rate = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
"bit-rate", UART_DM_CLK_RX_TX_BIT_RATE);
return 0; return 0;
} }